[people/ms/u-boot.git] / include / configs / hikey.h

/*
 * (C) Copyright 2015 Linaro
 *
 * Peter Griffin <peter.griffin@linaro.org>
 *
 * Configuration for HiKey 96boards CE. Parts were derived from other ARM
 * configurations.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __HIKEY_H
#define __HIKEY_H

#include <linux/sizes.h>

#define CONFIG_POWER
#define CONFIG_POWER_HI6553

#define CONFIG_REMAKE_ELF

#define CONFIG_SUPPORT_RAW_INITRD

/* Physical Memory Map */

/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
#define CONFIG_SYS_TEXT_BASE		0x35000000

#define CONFIG_NR_DRAM_BANKS		6
#define PHYS_SDRAM_1			0x00000000

/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
#define PHYS_SDRAM_1_SIZE		0x3EFFFFFF

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1

#define CONFIG_SYS_INIT_RAM_SIZE	0x1000

#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)

#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)

/* Generic Timer Definitions */
#define COUNTER_FREQUENCY		19000000

/* Generic Interrupt Controller Definitions */
#define GICD_BASE			0xf6801000
#define GICC_BASE			0xf6802000

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)

#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
/*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO

#define CONFIG_MISC_INIT_R
#endif

#define CONFIG_HIKEY_GPIO

/* SD/MMC configuration */
#define CONFIG_BOUNCE_BUFFER

/* Command line configuration */

#define CONFIG_MTD_PARTITIONS

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE

#include <config_distro_defaults.h>

/* Initial environment variables */

/*
 * Defines where the kernel and FDT will be put in RAM
 */

#define BOOT_TARGET_DEVICES(func) \
	func(USB, usb, 0) \
	func(MMC, mmc, 1) \
	func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>

#define CONFIG_EXTRA_ENV_SETTINGS	\
				"kernel_name=Image\0"	\
				"kernel_addr_r=0x00080000\0" \
				"fdtfile=hi6220-hikey.dtb\0" \
				"fdt_addr_r=0x02000000\0" \
				"fdt_high=0xffffffffffffffff\0" \
				"initrd_high=0xffffffffffffffff\0" \
				BOOTENV

/* Preserve environment on sd card */
#define CONFIG_ENV_SIZE			0x1000
#define CONFIG_ENV_VARS_UBOOT_CONFIG

/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS		64	/* max command args */

#endif /* __HIKEY_H */
Commit	Line	Data
11ac2363 PG	1	/*
	2	* (C) Copyright 2015 Linaro
	3	*
	4	* Peter Griffin <peter.griffin@linaro.org>
	5	*
	6	* Configuration for HiKey 96boards CE. Parts were derived from other ARM
	7	* configurations.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __HIKEY_H
	13	#define __HIKEY_H
	14
c9a67d24 PG	15	#include <linux/sizes.h>
c9a67d24 PG	16
11ac2363 PG	17	#define CONFIG_POWER
	18	#define CONFIG_POWER_HI6553
	19
	20	#define CONFIG_REMAKE_ELF
	21
	22	#define CONFIG_SUPPORT_RAW_INITRD
	23
11ac2363 PG	24	/* Physical Memory Map */
	25
	26	/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
	27	#define CONFIG_SYS_TEXT_BASE 0x35000000
	28
305b9091	29	#define CONFIG_NR_DRAM_BANKS 6
11ac2363 PG	30	#define PHYS_SDRAM_1 0x00000000
	31
	32	/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
05e682d4 PG	33	#define PHYS_SDRAM_1_SIZE 0x3EFFFFFF
05e682d4 PG	34
11ac2363 PG	35	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	36
	37	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
	38
	39	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
	40
	41	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
	42
	43	/* Generic Timer Definitions */
	44	#define COUNTER_FREQUENCY 19000000
	45
	46	/* Generic Interrupt Controller Definitions */
	47	#define GICD_BASE 0xf6801000
	48	#define GICC_BASE 0xf6802000
	49
	50	/* Size of malloc() pool */
c9a67d24	51	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
11ac2363	52
11ac2363	53	#ifdef CONFIG_CMD_USB
11ac2363 PG	54	#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
	55	/#define CONFIG_DWC2_DFLT_SPEED_FULL/
	56	#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
	57
11ac2363 PG	58	#define CONFIG_MISC_INIT_R
	59	#endif
	60
	61	#define CONFIG_HIKEY_GPIO
11ac2363 PG	62
11ac2363 PG	63	/* SD/MMC configuration */
11ac2363	64	#define CONFIG_BOUNCE_BUFFER
11ac2363	65
11ac2363	66	/* Command line configuration */
11ac2363 PG	67
	68	#define CONFIG_MTD_PARTITIONS
	69
	70	/* BOOTP options */
	71	#define CONFIG_BOOTP_BOOTFILESIZE
	72
	73	#include <config_distro_defaults.h>
	74
	75	/* Initial environment variables */
	76
	77	/*
	78	* Defines where the kernel and FDT will be put in RAM
	79	*/
	80
11ac2363 PG	81	#define BOOT_TARGET_DEVICES(func) \
	82	func(USB, usb, 0) \
	83	func(MMC, mmc, 1) \
	84	func(DHCP, dhcp, na)
	85	#include <config_distro_bootcmd.h>
	86
	87	#define CONFIG_EXTRA_ENV_SETTINGS \
	88	"kernel_name=Image\0" \
	89	"kernel_addr_r=0x00080000\0" \
da3e620d	90	"fdtfile=hi6220-hikey.dtb\0" \
11ac2363 PG	91	"fdt_addr_r=0x02000000\0" \
	92	"fdt_high=0xffffffffffffffff\0" \
	93	"initrd_high=0xffffffffffffffff\0" \
	94	BOOTENV
	95
1cc0a9f4	96	/* Preserve environment on sd card */
11ac2363	97	#define CONFIG_ENV_SIZE 0x1000
11ac2363 PG	98	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	99
	100	/* Monitor Command Prompt */
	101	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
11ac2363 PG	102	#define CONFIG_SYS_LONGHELP
	103	#define CONFIG_CMDLINE_EDITING
	104	#define CONFIG_SYS_MAXARGS 64 /* max command args */
	105
11ac2363	106	#endif /* __HIKEY_H */