projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| b765ffb7 | 1 | /* |
| 7e4a0d25 | 2 | * (C) Copyright 2007-2008 |
| b765ffb7 SR |
3 | * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| 4 | * | |
| 5 | * This program is free software; you can redistribute it and/or | |
| 6 | * modify it under the terms of the GNU General Public License as | |
| 7 | * published by the Free Software Foundation; either version 2 of | |
| 8 | * the License, or (at your option) any later version. | |
| 9 | * | |
| 10 | * This program is distributed in the hope that it will be useful, | |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 13 | * GNU General Public License for more details. | |
| 14 | * | |
| 15 | * You should have received a copy of the GNU General Public License | |
| 16 | * along with this program; if not, write to the Free Software | |
| 17 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 18 | * MA 02111-1307 USA | |
| 19 | */ | |
| 20 | ||
| 21 | /************************************************************************ | |
| 22 | * lwmon5.h - configuration for lwmon5 board | |
| 23 | ***********************************************************************/ | |
| 24 | #ifndef __CONFIG_H | |
| 25 | #define __CONFIG_H | |
| 26 | ||
| 27 | /*----------------------------------------------------------------------- | |
| 28 | * High Level Configuration Options | |
| 29 | *----------------------------------------------------------------------*/ | |
| 30 | #define CONFIG_LWMON5 1 /* Board is lwmon5 */ | |
| 31 | #define CONFIG_440EPX 1 /* Specific PPC440EPx */ | |
| e73846b7 | 32 | #define CONFIG_440 1 /* ... PPC440 family */ |
| b765ffb7 SR |
33 | #define CONFIG_4xx 1 /* ... PPC4xx family */ |
| 34 | #define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ | |
| 35 | ||
| 36 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ | |
| 3ad63878 | 37 | #define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */ |
| b765ffb7 | 38 | #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ |
| 0f009f78 | 39 | #define CONFIG_BOARD_RESET 1 /* Call board_reset */ |
| b765ffb7 SR |
40 | |
| 41 | /*----------------------------------------------------------------------- | |
| 42 | * Base addresses -- Note these are effective addresses where the | |
| 43 | * actual resources get mapped (not physical addresses) | |
| 44 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf JCPV |
45 | #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ |
| 46 | #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */ | |
| 47 | ||
| 48 | #define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000 | |
| 49 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ | |
| 50 | #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ | |
| 51 | #define CONFIG_SYS_MONITOR_BASE TEXT_BASE | |
| 52 | #define CONFIG_SYS_LIME_BASE_0 0xc0000000 | |
| 53 | #define CONFIG_SYS_LIME_BASE_1 0xc1000000 | |
| 54 | #define CONFIG_SYS_LIME_BASE_2 0xc2000000 | |
| 55 | #define CONFIG_SYS_LIME_BASE_3 0xc3000000 | |
| 56 | #define CONFIG_SYS_FPGA_BASE_0 0xc4000000 | |
| 57 | #define CONFIG_SYS_FPGA_BASE_1 0xc4200000 | |
| 58 | #define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */ | |
| 59 | #define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */ | |
| 60 | #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ | |
| 61 | #define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 | |
| 62 | #define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 | |
| 63 | #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 | |
| b765ffb7 SR |
64 | |
| 65 | /* Don't change either of these */ | |
| 6d0f6bcf | 66 | #define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ |
| b765ffb7 | 67 | |
| 6d0f6bcf JCPV |
68 | #define CONFIG_SYS_USB2D0_BASE 0xe0000100 |
| 69 | #define CONFIG_SYS_USB_DEVICE 0xe0000000 | |
| 70 | #define CONFIG_SYS_USB_HOST 0xe0000400 | |
| b765ffb7 SR |
71 | |
| 72 | /*----------------------------------------------------------------------- | |
| 73 | * Initial RAM & stack pointer | |
| 74 | *----------------------------------------------------------------------*/ | |
| 8f24e063 SR |
75 | /* |
| 76 | * On LWMON5 we use D-cache as init-ram and stack pointer. We also move | |
| 77 | * the POST_WORD from OCM to a 440EPx register that preserves it's | |
| eb0615bf YT |
78 | * content during reset (GPT0_COMP6). This way we reserve the OCM (16k) |
| 79 | * for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.) | |
| 8f24e063 | 80 | */ |
| 6d0f6bcf JCPV |
81 | #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ |
| 82 | #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ | |
| 83 | #define CONFIG_SYS_INIT_RAM_END (4 << 10) | |
| 84 | #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data*/ | |
| 85 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) | |
| 86 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 87 | #define CONFIG_SYS_POST_ALT_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) | |
| 8f24e063 | 88 | /* unused GPT0 COMP reg */ |
| 6d0f6bcf | 89 | #define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ |
| 14f73ca6 | 90 | /* 440EPx errata CHIP 11 */ |
| 6d0f6bcf | 91 | #define CONFIG_SYS_OCM_SIZE (16 << 10) |
| b765ffb7 | 92 | |
| 8f15d4ad YT |
93 | /* Additional registers for watchdog timer post test */ |
| 94 | ||
| 6d0f6bcf JCPV |
95 | #define CONFIG_SYS_WATCHDOG_TIME_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK2) |
| 96 | #define CONFIG_SYS_WATCHDOG_FLAGS_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK1) | |
| 97 | #define CONFIG_SYS_DSPIC_TEST_ADDR CONFIG_SYS_WATCHDOG_FLAGS_ADDR | |
| 98 | #define CONFIG_SYS_OCM_STATUS_ADDR CONFIG_SYS_WATCHDOG_FLAGS_ADDR | |
| 99 | #define CONFIG_SYS_WATCHDOG_MAGIC 0x12480000 | |
| 100 | #define CONFIG_SYS_WATCHDOG_MAGIC_MASK 0xFFFF0000 | |
| 101 | #define CONFIG_SYS_DSPIC_TEST_MASK 0x00000001 | |
| 102 | #define CONFIG_SYS_OCM_STATUS_OK 0x00009A00 | |
| 103 | #define CONFIG_SYS_OCM_STATUS_FAIL 0x0000A300 | |
| 104 | #define CONFIG_SYS_OCM_STATUS_MASK 0x0000FF00 | |
| 8f15d4ad | 105 | |
| b765ffb7 SR |
106 | /*----------------------------------------------------------------------- |
| 107 | * Serial Port | |
| 108 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf | 109 | #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external clock provided */ |
| b765ffb7 SR |
110 | #define CONFIG_BAUDRATE 115200 |
| 111 | #define CONFIG_SERIAL_MULTI 1 | |
| 112 | /* define this if you want console on UART1 */ | |
| 113 | #define CONFIG_UART1_CONSOLE 1 /* use UART1 as console */ | |
| 114 | ||
| 6d0f6bcf | 115 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
| b765ffb7 SR |
116 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} |
| 117 | ||
| 118 | /*----------------------------------------------------------------------- | |
| 119 | * Environment | |
| 120 | *----------------------------------------------------------------------*/ | |
| 5a1aceb0 | 121 | #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ |
| b765ffb7 SR |
122 | |
| 123 | /*----------------------------------------------------------------------- | |
| 124 | * FLASH related | |
| 125 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf | 126 | #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ |
| 00b1883a | 127 | #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ |
| b765ffb7 | 128 | |
| 6d0f6bcf JCPV |
129 | #define CONFIG_SYS_FLASH0 0xFC000000 |
| 130 | #define CONFIG_SYS_FLASH1 0xF8000000 | |
| 131 | #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 } | |
| b765ffb7 | 132 | |
| 6d0f6bcf JCPV |
133 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ |
| 134 | #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ | |
| b765ffb7 | 135 | |
| 6d0f6bcf JCPV |
136 | #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
| 137 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ | |
| b765ffb7 | 138 | |
| 6d0f6bcf JCPV |
139 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ |
| 140 | #define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */ | |
| b765ffb7 | 141 | |
| 6d0f6bcf JCPV |
142 | #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ |
| 143 | #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ | |
| b765ffb7 | 144 | |
| 0e8d1586 | 145 | #define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ |
| 6d0f6bcf | 146 | #define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE) |
| 0e8d1586 | 147 | #define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ |
| b765ffb7 SR |
148 | |
| 149 | /* Address and size of Redundant Environment Sector */ | |
| 0e8d1586 JCPV |
150 | #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) |
| 151 | #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) | |
| b765ffb7 SR |
152 | |
| 153 | /*----------------------------------------------------------------------- | |
| 154 | * DDR SDRAM | |
| 155 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf JCPV |
156 | #define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */ |
| 157 | #define CONFIG_SYS_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ | |
| b765ffb7 | 158 | #define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ |
| b765ffb7 | 159 | #define CONFIG_DDR_ECC 1 /* enable ECC */ |
| 6d0f6bcf | 160 | #define CONFIG_SYS_POST_ECC_ON CONFIG_SYS_POST_ECC |
| 531e3e8b PK |
161 | |
| 162 | /* POST support */ | |
| 6d0f6bcf JCPV |
163 | #define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ |
| 164 | CONFIG_SYS_POST_CPU | \ | |
| 165 | CONFIG_SYS_POST_ECC_ON | \ | |
| 166 | CONFIG_SYS_POST_ETHER | \ | |
| 167 | CONFIG_SYS_POST_FPU | \ | |
| 168 | CONFIG_SYS_POST_I2C | \ | |
| 169 | CONFIG_SYS_POST_MEMORY | \ | |
| 170 | CONFIG_SYS_POST_OCM | \ | |
| 171 | CONFIG_SYS_POST_RTC | \ | |
| 172 | CONFIG_SYS_POST_SPR | \ | |
| 173 | CONFIG_SYS_POST_UART | \ | |
| 174 | CONFIG_SYS_POST_SYSMON | \ | |
| 175 | CONFIG_SYS_POST_WATCHDOG | \ | |
| 176 | CONFIG_SYS_POST_DSP | \ | |
| 177 | CONFIG_SYS_POST_BSPEC1 | \ | |
| 178 | CONFIG_SYS_POST_BSPEC2 | \ | |
| 179 | CONFIG_SYS_POST_BSPEC3 | \ | |
| 180 | CONFIG_SYS_POST_BSPEC4 | \ | |
| 181 | CONFIG_SYS_POST_BSPEC5) | |
| 8f15d4ad YT |
182 | |
| 183 | #define CONFIG_POST_WATCHDOG {\ | |
| 184 | "Watchdog timer test", \ | |
| 185 | "watchdog", \ | |
| 186 | "This test checks the watchdog timer.", \ | |
| 187 | POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, \ | |
| 188 | &lwmon5_watchdog_post_test, \ | |
| 189 | NULL, \ | |
| 190 | NULL, \ | |
| 6d0f6bcf | 191 | CONFIG_SYS_POST_WATCHDOG \ |
| 8f15d4ad YT |
192 | } |
| 193 | ||
| 194 | #define CONFIG_POST_BSPEC1 {\ | |
| 195 | "dsPIC init test", \ | |
| 196 | "dspic_init", \ | |
| 197 | "This test returns result of dsPIC READY test run earlier.", \ | |
| 198 | POST_RAM | POST_ALWAYS, \ | |
| 199 | &dspic_init_post_test, \ | |
| 200 | NULL, \ | |
| 201 | NULL, \ | |
| 6d0f6bcf | 202 | CONFIG_SYS_POST_BSPEC1 \ |
| 8f15d4ad YT |
203 | } |
| 204 | ||
| 205 | #define CONFIG_POST_BSPEC2 {\ | |
| 206 | "dsPIC test", \ | |
| 207 | "dspic", \ | |
| 208 | "This test gets result of dsPIC POST and dsPIC version.", \ | |
| 209 | POST_RAM | POST_ALWAYS, \ | |
| 210 | &dspic_post_test, \ | |
| 211 | NULL, \ | |
| 212 | NULL, \ | |
| 6d0f6bcf | 213 | CONFIG_SYS_POST_BSPEC2 \ |
| 8f15d4ad YT |
214 | } |
| 215 | ||
| 216 | #define CONFIG_POST_BSPEC3 {\ | |
| 217 | "FPGA test", \ | |
| 218 | "fpga", \ | |
| 219 | "This test checks FPGA registers and memory.", \ | |
| 220 | POST_RAM | POST_ALWAYS, \ | |
| 221 | &fpga_post_test, \ | |
| 222 | NULL, \ | |
| 223 | NULL, \ | |
| 6d0f6bcf | 224 | CONFIG_SYS_POST_BSPEC3 \ |
| 8f15d4ad YT |
225 | } |
| 226 | ||
| 227 | #define CONFIG_POST_BSPEC4 {\ | |
| 228 | "GDC test", \ | |
| 229 | "gdc", \ | |
| 230 | "This test checks GDC registers and memory.", \ | |
| 231 | POST_RAM | POST_ALWAYS, \ | |
| 232 | &gdc_post_test, \ | |
| 233 | NULL, \ | |
| 234 | NULL, \ | |
| 6d0f6bcf | 235 | CONFIG_SYS_POST_BSPEC4 \ |
| 8f15d4ad YT |
236 | } |
| 237 | ||
| 238 | #define CONFIG_POST_BSPEC5 {\ | |
| 239 | "SYSMON1 test", \ | |
| 240 | "sysmon1", \ | |
| 241 | "This test checks GPIO_62_EPX pin indicating power failure.", \ | |
| 242 | POST_RAM | POST_MANUAL | POST_NORMAL | POST_SLOWTEST, \ | |
| 243 | &sysmon1_post_test, \ | |
| 244 | NULL, \ | |
| 245 | NULL, \ | |
| 6d0f6bcf | 246 | CONFIG_SYS_POST_BSPEC5 \ |
| 8f15d4ad | 247 | } |
| 3e4c90c6 | 248 | |
| 6d0f6bcf | 249 | #define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ |
| 3e4c90c6 | 250 | #define CONFIG_LOGBUFFER |
| eb0615bf | 251 | /* Reserve GPT0_COMP1-COMP5 for logbuffer header */ |
| 6d0f6bcf JCPV |
252 | #define CONFIG_ALT_LH_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1) |
| 253 | #define CONFIG_ALT_LB_ADDR (CONFIG_SYS_OCM_BASE) | |
| 254 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ | |
| b765ffb7 SR |
255 | |
| 256 | /*----------------------------------------------------------------------- | |
| 257 | * I2C | |
| 258 | *----------------------------------------------------------------------*/ | |
| 259 | #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ | |
| 260 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
| 6d0f6bcf JCPV |
261 | #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ |
| 262 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
| b765ffb7 | 263 | |
| 6d0f6bcf JCPV |
264 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 /* EEPROM AT24C128 */ |
| 265 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ | |
| 266 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel AT24C128 has */ | |
| c25dd8fc SR |
267 | /* 64 byte page write mode using*/ |
| 268 | /* last 6 bits of the address */ | |
| 6d0f6bcf | 269 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ |
| b765ffb7 SR |
270 | |
| 271 | #define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ | |
| 6d0f6bcf JCPV |
272 | #define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ |
| 273 | #define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ | |
| 274 | #define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */ | |
| b765ffb7 | 275 | |
| 3ad63878 SR |
276 | #define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ |
| 277 | #if 0 | |
| 278 | #define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ | |
| c37207d7 WD |
279 | #define CONFIG_AUTOBOOT_PROMPT \ |
| 280 | "\nEnter password - autoboot in %d sec...\n", bootdelay | |
| 3ad63878 SR |
281 | #define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ |
| 282 | #endif | |
| 283 | ||
| 284 | #define CONFIG_PREBOOT "setenv bootdelay 15" | |
| b765ffb7 SR |
285 | |
| 286 | #undef CONFIG_BOOTARGS | |
| 287 | ||
| 288 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 289 | "hostname=lwmon5\0" \ | |
| 290 | "netdev=eth0\0" \ | |
| 5d187430 | 291 | "unlock=yes\0" \ |
| 3e4c90c6 | 292 | "logversion=2\0" \ |
| b765ffb7 SR |
293 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| 294 | "nfsroot=${serverip}:${rootpath}\0" \ | |
| 295 | "ramargs=setenv bootargs root=/dev/ram rw\0" \ | |
| 296 | "addip=setenv bootargs ${bootargs} " \ | |
| 297 | "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ | |
| 298 | ":${hostname}:${netdev}:off panic=1\0" \ | |
| 299 | "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ | |
| 04625764 SR |
300 | "addmisc=setenv bootargs ${bootargs} rtc-pcf8563.probe=0,0x51\0"\ |
| 301 | "flash_nfs=run nfsargs addip addtty addmisc;" \ | |
| b765ffb7 | 302 | "bootm ${kernel_addr}\0" \ |
| 04625764 | 303 | "flash_self=run ramargs addip addtty addmisc;" \ |
| b765ffb7 | 304 | "bootm ${kernel_addr} ${ramdisk_addr}\0" \ |
| 04625764 SR |
305 | "net_nfs=tftp 200000 ${bootfile};" \ |
| 306 | "run nfsargs addip addtty addmisc;bootm\0" \ | |
| b765ffb7 SR |
307 | "rootpath=/opt/eldk/ppc_4xxFP\0" \ |
| 308 | "bootfile=/tftpboot/lwmon5/uImage\0" \ | |
| 309 | "kernel_addr=FC000000\0" \ | |
| 310 | "ramdisk_addr=FC180000\0" \ | |
| 311 | "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ | |
| 312 | "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \ | |
| 313 | "cp.b 200000 FFF80000 80000\0" \ | |
| d8ab58b2 | 314 | "upd=run load update\0" \ |
| 334043f6 SR |
315 | "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \ |
| 316 | "autoscr 200000\0" \ | |
| b765ffb7 SR |
317 | "" |
| 318 | #define CONFIG_BOOTCOMMAND "run flash_self" | |
| 319 | ||
| 320 | #if 0 | |
| 321 | #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ | |
| 322 | #else | |
| 323 | #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ | |
| 324 | #endif | |
| 325 | ||
| 326 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
| 6d0f6bcf | 327 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
| b765ffb7 SR |
328 | |
| 329 | #define CONFIG_IBM_EMAC4_V4 1 | |
| 330 | #define CONFIG_MII 1 /* MII PHY management */ | |
| 331 | #define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */ | |
| 332 | ||
| 333 | #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ | |
| 3ad63878 | 334 | #define CONFIG_PHY_RESET_DELAY 300 |
| b765ffb7 SR |
335 | |
| 336 | #define CONFIG_HAS_ETH0 | |
| 6d0f6bcf | 337 | #define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ |
| b765ffb7 SR |
338 | |
| 339 | #define CONFIG_NET_MULTI 1 | |
| 340 | #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ | |
| 341 | #define CONFIG_PHY1_ADDR 1 | |
| 342 | ||
| d610a607 AG |
343 | /* Video console */ |
| 344 | #define CONFIG_VIDEO | |
| 345 | #define CONFIG_VIDEO_MB862xx | |
| 346 | #define CONFIG_CFB_CONSOLE | |
| 347 | #define CONFIG_VIDEO_LOGO | |
| 348 | #define CONFIG_CONSOLE_EXTRA_INFO | |
| 349 | #define VIDEO_FB_16BPP_PIXEL_SWAP | |
| 350 | ||
| 351 | #define CONFIG_VGA_AS_SINGLE_DEVICE | |
| 352 | #define CONFIG_VIDEO_SW_CURSOR | |
| 353 | #define CONFIG_SPLASH_SCREEN | |
| 354 | ||
| b765ffb7 SR |
355 | /* USB */ |
| 356 | #ifdef CONFIG_440EPX | |
| 357 | #define CONFIG_USB_OHCI | |
| 358 | #define CONFIG_USB_STORAGE | |
| 359 | ||
| 360 | /* Comment this out to enable USB 1.1 device */ | |
| 361 | #define USB_2_0_DEVICE | |
| 362 | ||
| b765ffb7 SR |
363 | #endif /* CONFIG_440EPX */ |
| 364 | ||
| 365 | /* Partitions */ | |
| 366 | #define CONFIG_MAC_PARTITION | |
| 367 | #define CONFIG_DOS_PARTITION | |
| 368 | #define CONFIG_ISO_PARTITION | |
| 369 | ||
| 079a136c JL |
370 | /* |
| 371 | * BOOTP options | |
| 372 | */ | |
| 373 | #define CONFIG_BOOTP_BOOTFILESIZE | |
| 374 | #define CONFIG_BOOTP_BOOTPATH | |
| 375 | #define CONFIG_BOOTP_GATEWAY | |
| 376 | #define CONFIG_BOOTP_HOSTNAME | |
| b765ffb7 | 377 | |
| a22d4da9 JL |
378 | /* |
| 379 | * Command line configuration. | |
| 380 | */ | |
| 381 | #include <config_cmd_default.h> | |
| 382 | ||
| 383 | #define CONFIG_CMD_ASKENV | |
| 384 | #define CONFIG_CMD_DATE | |
| 385 | #define CONFIG_CMD_DHCP | |
| 386 | #define CONFIG_CMD_DIAG | |
| 387 | #define CONFIG_CMD_EEPROM | |
| 388 | #define CONFIG_CMD_ELF | |
| 389 | #define CONFIG_CMD_FAT | |
| 390 | #define CONFIG_CMD_I2C | |
| 391 | #define CONFIG_CMD_IRQ | |
| 3b3bff4c | 392 | #define CONFIG_CMD_LOG |
| a22d4da9 JL |
393 | #define CONFIG_CMD_MII |
| 394 | #define CONFIG_CMD_NET | |
| 395 | #define CONFIG_CMD_NFS | |
| 396 | #define CONFIG_CMD_PCI | |
| 397 | #define CONFIG_CMD_PING | |
| 398 | #define CONFIG_CMD_REGINFO | |
| 399 | #define CONFIG_CMD_SDRAM | |
| b765ffb7 | 400 | |
| d610a607 AG |
401 | #ifdef CONFIG_VIDEO |
| 402 | #define CONFIG_CMD_BMP | |
| 403 | #endif | |
| 404 | ||
| a22d4da9 JL |
405 | #ifdef CONFIG_440EPX |
| 406 | #define CONFIG_CMD_USB | |
| 407 | #endif | |
| b765ffb7 SR |
408 | |
| 409 | /*----------------------------------------------------------------------- | |
| 410 | * Miscellaneous configurable options | |
| 411 | *----------------------------------------------------------------------*/ | |
| a22d4da9 JL |
412 | #define CONFIG_SUPPORT_VFAT |
| 413 | ||
| 6d0f6bcf JCPV |
414 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| 415 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| 58d20425 | 416 | |
| 6d0f6bcf JCPV |
417 | #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ |
| 418 | #ifdef CONFIG_SYS_HUSH_PARSER | |
| 419 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 58d20425 WD |
420 | #endif |
| 421 | ||
| a22d4da9 | 422 | #if defined(CONFIG_CMD_KGDB) |
| 6d0f6bcf | 423 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| b765ffb7 | 424 | #else |
| 6d0f6bcf | 425 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| b765ffb7 | 426 | #endif |
| 6d0f6bcf JCPV |
427 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| 428 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 429 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
| b765ffb7 | 430 | |
| 6d0f6bcf JCPV |
431 | #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ |
| 432 | #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ | |
| b765ffb7 | 433 | |
| 6d0f6bcf JCPV |
434 | #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
| 435 | #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ | |
| b765ffb7 | 436 | |
| 6d0f6bcf | 437 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
| b765ffb7 SR |
438 | |
| 439 | #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ | |
| 440 | #define CONFIG_LOOPW 1 /* enable loopw command */ | |
| 441 | #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ | |
| b765ffb7 SR |
442 | #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ |
| 443 | ||
| 444 | /*----------------------------------------------------------------------- | |
| 445 | * PCI stuff | |
| 446 | *----------------------------------------------------------------------*/ | |
| 447 | /* General PCI */ | |
| 448 | #define CONFIG_PCI /* include pci support */ | |
| 449 | #undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ | |
| 450 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 6d0f6bcf | 451 | #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/ |
| b765ffb7 SR |
452 | |
| 453 | /* Board-specific PCI */ | |
| 6d0f6bcf JCPV |
454 | #define CONFIG_SYS_PCI_TARGET_INIT |
| 455 | #define CONFIG_SYS_PCI_MASTER_INIT | |
| b765ffb7 | 456 | |
| 6d0f6bcf JCPV |
457 | #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ |
| 458 | #define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ | |
| b765ffb7 SR |
459 | |
| 460 | #define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ | |
| 2e721094 | 461 | #define CONFIG_WD_PERIOD 40000 /* in usec */ |
| d32a874b | 462 | #define CONFIG_WD_MAX_RATE 66600 /* in ticks */ |
| b765ffb7 SR |
463 | |
| 464 | /* | |
| 465 | * For booting Linux, the board info and command line data | |
| 466 | * have to be in the first 8 MB of memory, since this is | |
| 467 | * the maximum mapped by the Linux kernel during initialization. | |
| 468 | */ | |
| 6d0f6bcf | 469 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
| b765ffb7 SR |
470 | |
| 471 | /*----------------------------------------------------------------------- | |
| 472 | * External Bus Controller (EBC) Setup | |
| 473 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf | 474 | #define CONFIG_SYS_FLASH CONFIG_SYS_FLASH_BASE |
| b765ffb7 SR |
475 | |
| 476 | /* Memory Bank 0 (NOR-FLASH) initialization */ | |
| 6d0f6bcf JCPV |
477 | #define CONFIG_SYS_EBC_PB0AP 0x03050200 |
| 478 | #define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH | 0xfc000) | |
| b765ffb7 SR |
479 | |
| 480 | /* Memory Bank 1 (Lime) initialization */ | |
| 6d0f6bcf JCPV |
481 | #define CONFIG_SYS_EBC_PB1AP 0x01004380 |
| 482 | #define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_LIME_BASE_0 | 0xdc000) | |
| b765ffb7 SR |
483 | |
| 484 | /* Memory Bank 2 (FPGA) initialization */ | |
| 6d0f6bcf JCPV |
485 | #define CONFIG_SYS_EBC_PB2AP 0x01004400 |
| 486 | #define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE_0 | 0x1c000) | |
| b765ffb7 SR |
487 | |
| 488 | /* Memory Bank 3 (FPGA2) initialization */ | |
| 6d0f6bcf JCPV |
489 | #define CONFIG_SYS_EBC_PB3AP 0x01004400 |
| 490 | #define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_FPGA_BASE_1 | 0x1c000) | |
| b765ffb7 | 491 | |
| 6d0f6bcf | 492 | #define CONFIG_SYS_EBC_CFG 0xb8400000 |
| b765ffb7 | 493 | |
| 04e6c38b SR |
494 | /*----------------------------------------------------------------------- |
| 495 | * Graphics (Fujitsu Lime) | |
| 496 | *----------------------------------------------------------------------*/ | |
| 497 | /* SDRAM Clock frequency adjustment register */ | |
| 6d0f6bcf | 498 | #define CONFIG_SYS_LIME_SDRAM_CLOCK 0xC1FC0038 |
| b66091de | 499 | /* Lime Clock frequency is to set 100MHz */ |
| 6d0f6bcf | 500 | #define CONFIG_SYS_LIME_CLOCK_100MHZ 0x00000 |
| b66091de AG |
501 | #if 0 |
| 502 | /* Lime Clock frequency for 133MHz */ | |
| 6d0f6bcf | 503 | #define CONFIG_SYS_LIME_CLOCK_133MHZ 0x10000 |
| b66091de | 504 | #endif |
| 04e6c38b SR |
505 | |
| 506 | /* SDRAM Parameter register */ | |
| 6d0f6bcf | 507 | #define CONFIG_SYS_LIME_MMR 0xC1FCFFFC |
| b66091de AG |
508 | /* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars |
| 509 | and pixel flare on display when 133MHz was configured. According to | |
| 510 | SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */ | |
| 6d0f6bcf JCPV |
511 | #ifdef CONFIG_SYS_LIME_CLOCK_133MHZ |
| 512 | #define CONFIG_SYS_LIME_MMR_VALUE 0x414FB7F3 | |
| b66091de | 513 | #else |
| 6d0f6bcf | 514 | #define CONFIG_SYS_LIME_MMR_VALUE 0x414FB7F2 |
| b66091de | 515 | #endif |
| 04e6c38b | 516 | |
| b765ffb7 SR |
517 | /*----------------------------------------------------------------------- |
| 518 | * GPIO Setup | |
| 519 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf JCPV |
520 | #define CONFIG_SYS_GPIO_PHY1_RST 12 |
| 521 | #define CONFIG_SYS_GPIO_FLASH_WP 14 | |
| 522 | #define CONFIG_SYS_GPIO_PHY0_RST 22 | |
| 523 | #define CONFIG_SYS_GPIO_DSPIC_READY 51 | |
| 524 | #define CONFIG_SYS_GPIO_EEPROM_EXT_WP 55 | |
| 525 | #define CONFIG_SYS_GPIO_HIGHSIDE 56 | |
| 526 | #define CONFIG_SYS_GPIO_EEPROM_INT_WP 57 | |
| 527 | #define CONFIG_SYS_GPIO_BOARD_RESET 58 | |
| 528 | #define CONFIG_SYS_GPIO_LIME_S 59 | |
| 529 | #define CONFIG_SYS_GPIO_LIME_RST 60 | |
| 530 | #define CONFIG_SYS_GPIO_SYSMON_STATUS 62 | |
| 531 | #define CONFIG_SYS_GPIO_WATCHDOG 63 | |
| b765ffb7 SR |
532 | |
| 533 | /*----------------------------------------------------------------------- | |
| 534 | * PPC440 GPIO Configuration | |
| 535 | */ | |
| 6d0f6bcf | 536 | #define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ |
| b765ffb7 SR |
537 | { \ |
| 538 | /* GPIO Core 0 */ \ | |
| 539 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ | |
| 540 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ | |
| 541 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ | |
| 542 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ | |
| 543 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ | |
| 544 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ | |
| 545 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ | |
| 546 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ | |
| 547 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ | |
| 548 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ | |
| 549 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ | |
| 550 | {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ | |
| 551 | {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ | |
| 552 | {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ | |
| 553 | {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \ | |
| 20d500d5 | 554 | {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO15 */ \ |
| 1636d1c8 | 555 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \ |
| b765ffb7 SR |
556 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \ |
| 557 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \ | |
| 558 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \ | |
| 559 | {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ | |
| 560 | {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ | |
| 561 | {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ | |
| 562 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ | |
| 563 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \ | |
| 564 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \ | |
| 565 | {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ | |
| 566 | {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ | |
| 567 | {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \ | |
| 568 | {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ | |
| 569 | {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ | |
| 570 | {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ | |
| 571 | }, \ | |
| 572 | { \ | |
| 573 | /* GPIO Core 1 */ \ | |
| 574 | {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ | |
| 575 | {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ | |
| 576 | {GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ | |
| 577 | {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ | |
| 578 | {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ | |
| 579 | {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ | |
| 580 | {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ | |
| 581 | {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ | |
| 582 | {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ | |
| 583 | {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ | |
| 584 | {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ | |
| 585 | {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ | |
| 586 | {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ | |
| 587 | {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ | |
| 588 | {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ | |
| 589 | {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ | |
| 590 | {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ | |
| 591 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO49 Unselect via TraceSelect Bit */ \ | |
| 04e6c38b | 592 | {GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ |
| b765ffb7 SR |
593 | {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ |
| 594 | {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ | |
| 20d500d5 | 595 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ |
| b765ffb7 SR |
596 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ |
| 597 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \ | |
| 598 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ | |
| 599 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \ | |
| 3e954beb | 600 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ |
| b765ffb7 SR |
601 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ |
| 602 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ | |
| 603 | {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ | |
| 604 | {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ | |
| 605 | {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ | |
| 606 | } \ | |
| 607 | } | |
| 608 | ||
| b765ffb7 SR |
609 | /* |
| 610 | * Internal Definitions | |
| 611 | * | |
| 612 | * Boot Flags | |
| 613 | */ | |
| 614 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
| 615 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
| 616 | ||
| a22d4da9 | 617 | #if defined(CONFIG_CMD_KGDB) |
| b765ffb7 SR |
618 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| 619 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
| 620 | #endif | |
| 621 | #endif /* __CONFIG_H */ |