[people/ms/u-boot.git] / include / configs / ma5d4evk.h

/*
 * Aries MA5D4 configuration
 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MA5D4EVK_CONFIG_H__
#define __MA5D4EVK_CONFIG_H__

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */

#include "at91-sama5_common.h"
#undef CONFIG_BOOTARGS
#define CONFIG_SYS_USE_SERIALFLASH	1
#define CONFIG_BOARD_LATE_INIT

/*
 * Memory configurations
 */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE		0x10000000

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR		0x210000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif

/*
 * Environment
 */
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_ENV_SIZE			0x4000
#define CONFIG_SYS_MMC_ENV_DEV		0	/* eMMC */
#define CONFIG_ENV_OFFSET		512	/* just after the MBR */

/*
 * U-Boot general configurations
 */

/*
 * Serial Driver
 */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE		ATMEL_BASE_USART0
#define CONFIG_USART_ID			ATMEL_ID_USART0

/*
 * Ethernet
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_MACB_SEARCH_PHY
#define CONFIG_ARP_TIMEOUT		200UL
#define CONFIG_IP_DEFRAG
#endif

/*
 * LCD
 */
#ifdef CONFIG_LCD
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
#define LCD_BPP				LCD_COLOR16
#define LCD_OUTPUT_BPP                  24
#define CONFIG_ATMEL_HLCD
#endif

/*
 * SD/MMC
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

/*
 * SPI NOR (boot memory)
 */
#ifdef CONFIG_CMD_SF
#define CONFIG_ATMEL_SPI
#define CONFIG_ATMEL_SPI0
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		30000000
#endif

/*
 * USB
 */
#ifdef CONFIG_CMD_USB

/* USB device */
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER      "AriesEmbedded"
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 * 1024 * 1024)
#define DFU_DEFAULT_POLL_TIMEOUT	300
#endif

/*
 * Boot Linux
 */
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTFILE		"fitImage"
#define CONFIG_BOOTARGS		"console=ttyS3,115200"
#define CONFIG_LOADADDR		0x20800000
#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/*
 * Extra Environments
 */
#define CONFIG_PREBOOT		"run try_bootscript"
#define CONFIG_HOSTNAME		ma5d4evk

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"consdev=ttyS3\0"						\
	"baudrate=115200\0"						\
	"bootscript=boot.scr\0"						\
	"bootdev=/dev/mmcblk0p1\0"					\
	"bootpart=0:1\0"						\
	"rootdev=/dev/mmcblk0p2\0"					\
	"netdev=eth0\0"							\
	"dfu_alt_info=mmc raw 0 3867148288\0"				\
	"kernel_addr_r=0x22000000\0"					\
	"update_spi_firmware_spl_addr=0x21000000\0"			\
	"update_spi_firmware_spl_filename=boot.bin\0"			\
	"update_spi_firmware_addr=0x22000000\0"				\
	"update_spi_firmware_filename=u-boot.img\0"			\
	"update_spi_firmware="	/* Update the SPI flash firmware */	\
		"if sf probe ; then "					\
		"if tftp ${update_spi_firmware_spl_addr} "		\
			"${update_spi_firmware_spl_filename} ; then "	\
		"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
		"if tftp ${update_spi_firmware_addr} "			\
			"${update_spi_firmware_filename} ; then "	\
		"setenv update_spi_firmware_filesize ${filesize} ; "	\
		"sf update ${update_spi_firmware_spl_addr} 0x0 "	\
			"${update_spi_firmware_spl_filesize} ; "	\
		"sf update ${update_spi_firmware_addr} 0x10000 "	\
			"${update_spi_firmware_filesize} ; "		\
		"fi ; "							\
		"fi ; "							\
		"fi\0"							\
	"addcons="							\
		"setenv bootargs ${bootargs} "				\
		"console=${consdev},${baudrate}\0"			\
	"addip="							\
		"setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
			"${netmask}:${hostname}:${netdev}:off\0"	\
	"addmisc="							\
		"setenv bootargs ${bootargs} ${miscargs}\0"		\
	"addargs=run addcons addmisc\0"					\
	"mmcload="							\
		"mmc rescan ; "						\
		"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"	\
	"netload="							\
		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
	"miscargs=nohlt panic=1\0"					\
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
	"nfsargs="							\
		"setenv bootargs root=/dev/nfs rw "			\
			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
	"fdtimg=if test ${bootmode} = \"sf\" ; then "			\
			"setenv kernel_fdt 1 ; "			\
		"else ; "						\
			"setenv kernel_fdt 2 ; "			\
		"fi\0"							\
	"mmc_mmc="							\
		"run fdtimg mmcload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"mmc_nfs="							\
		"run fdtimg mmcload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"net_mmc="							\
		"run fdtimg netload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"net_nfs="							\
		"run fdtimg netload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
	"try_bootscript="						\
		"mmc rescan;"						\
		"if test -e mmc 1:1 ${bootscript} ; then "		\
		"if load mmc 1:1 ${kernel_addr_r} ${bootscript};"	\
		"then ; "						\
			"echo Running bootscript... ; "			\
			"source ${kernel_addr_r} ; "			\
		"fi ; "							\
		"fi\0"
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE		0x200000
#define CONFIG_SPL_MAX_SIZE		0x10000
#define CONFIG_SPL_BSS_START_ADDR	0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000

#define CONFIG_SYS_MONITOR_LEN		(512 << 10)

#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000

#define CONFIG_SYS_USE_MMC
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT

#endif	/* __MA5D4EVK_CONFIG_H__ */
Commit	Line	Data
c21c28b6	1	/*
f1d56dff	2	* Aries MA5D4 configuration
c21c28b6 MV	3	* Copyright (C) 2015 Marek Vasut <marex@denx.de>
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef __MA5D4EVK_CONFIG_H__
	9	#define __MA5D4EVK_CONFIG_H__
	10
c21c28b6 MV	11	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	12
	13	#include "at91-sama5_common.h"
	14	#undef CONFIG_BOOTARGS
	15	#define CONFIG_SYS_USE_SERIALFLASH 1
e3f40720	16	#define CONFIG_BOARD_LATE_INIT
c21c28b6	17
c21c28b6 MV	18	/*
	19	* Memory configurations
	20	*/
	21	#define CONFIG_NR_DRAM_BANKS 1
	22	#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
	23	#define CONFIG_SYS_SDRAM_SIZE 0x10000000
	24
	25	#ifdef CONFIG_SPL_BUILD
	26	#define CONFIG_SYS_INIT_SP_ADDR 0x210000
	27	#else
	28	#define CONFIG_SYS_INIT_SP_ADDR \
	29	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
	30	#endif
	31
	32	/*
	33	* Environment
	34	*/
cc6f9dee MV	35	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
cc6f9dee MV	36	#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
c21c28b6	37	#define CONFIG_ENV_SIZE 0x4000
cc6f9dee MV	38	#define CONFIG_SYS_MMC_ENV_DEV 0 /* eMMC */
cc6f9dee MV	39	#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
c21c28b6 MV	40
	41	/*
	42	* U-Boot general configurations
	43	*/
c21c28b6 MV	44
	45	/*
	46	* Serial Driver
	47	*/
	48	#define CONFIG_ATMEL_USART
	49	#define CONFIG_USART_BASE ATMEL_BASE_USART0
	50	#define CONFIG_USART_ID ATMEL_ID_USART0
	51
	52	/*
	53	* Ethernet
	54	*/
	55	#ifdef CONFIG_CMD_NET
	56	#define CONFIG_MACB
	57	#define CONFIG_RMII
	58	#define CONFIG_NET_RETRY_COUNT 20
	59	#define CONFIG_MACB_SEARCH_PHY
	60	#define CONFIG_ARP_TIMEOUT 200UL
	61	#define CONFIG_IP_DEFRAG
	62	#endif
	63
	64	/*
	65	* LCD
	66	*/
	67	#ifdef CONFIG_LCD
c21c28b6 MV	68	#define CONFIG_BMP_16BPP
	69	#define CONFIG_BMP_24BPP
	70	#define CONFIG_BMP_32BPP
	71	#define LCD_BPP LCD_COLOR16
	72	#define LCD_OUTPUT_BPP 24
	73	#define CONFIG_ATMEL_HLCD
c21c28b6 MV	74	#endif
	75
	76	/*
	77	* SD/MMC
	78	*/
	79	#ifdef CONFIG_CMD_MMC
c21c28b6 MV	80	#define CONFIG_GENERIC_ATMEL_MCI
	81	#endif
	82
	83	/*
	84	* SPI NOR (boot memory)
	85	*/
	86	#ifdef CONFIG_CMD_SF
	87	#define CONFIG_ATMEL_SPI
	88	#define CONFIG_ATMEL_SPI0
	89	#define CONFIG_SPI_FLASH_ATMEL
	90	#define CONFIG_SF_DEFAULT_BUS 0
	91	#define CONFIG_SF_DEFAULT_CS 0
	92	#define CONFIG_SF_DEFAULT_SPEED 30000000
	93	#endif
	94
	95	/*
	96	* USB
	97	*/
	98	#ifdef CONFIG_CMD_USB
c21c28b6 MV	99
c21c28b6 MV	100	/* USB device */
c21c28b6 MV	101	#define CONFIG_USB_ETHER
c21c28b6 MV	102	#define CONFIG_USB_ETH_RNDIS
f1d56dff	103	#define CONFIG_USBNET_MANUFACTURER "AriesEmbedded"
cdc12eed MV	104	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	105	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024)
	106	#define DFU_DEFAULT_POLL_TIMEOUT 300
c21c28b6 MV	107	#endif
	108
	109	/*
	110	* Boot Linux
	111	*/
	112	#define CONFIG_CMDLINE_TAG
	113	#define CONFIG_INITRD_TAG
	114	#define CONFIG_SETUP_MEMORY_TAGS
c21c28b6 MV	115	#define CONFIG_BOOTFILE "fitImage"
	116	#define CONFIG_BOOTARGS "console=ttyS3,115200"
	117	#define CONFIG_LOADADDR 0x20800000
	118	#define CONFIG_BOOTCOMMAND "run mmc_mmc"
	119	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
c21c28b6 MV	120
	121	/*
	122	* Extra Environments
	123	*/
	124	#define CONFIG_PREBOOT "run try_bootscript"
	125	#define CONFIG_HOSTNAME ma5d4evk
	126
	127	#define CONFIG_EXTRA_ENV_SETTINGS \
	128	"consdev=ttyS3\0" \
	129	"baudrate=115200\0" \
	130	"bootscript=boot.scr\0" \
4425be39 MV	131	"bootdev=/dev/mmcblk0p1\0" \
	132	"bootpart=0:1\0" \
	133	"rootdev=/dev/mmcblk0p2\0" \
c21c28b6	134	"netdev=eth0\0" \
cdc12eed	135	"dfu_alt_info=mmc raw 0 3867148288\0" \
c21c28b6 MV	136	"kernel_addr_r=0x22000000\0" \
	137	"update_spi_firmware_spl_addr=0x21000000\0" \
	138	"update_spi_firmware_spl_filename=boot.bin\0" \
	139	"update_spi_firmware_addr=0x22000000\0" \
	140	"update_spi_firmware_filename=u-boot.img\0" \
	141	"update_spi_firmware=" /* Update the SPI flash firmware */ \
	142	"if sf probe ; then " \
	143	"if tftp ${update_spi_firmware_spl_addr} " \
	144	"${update_spi_firmware_spl_filename} ; then " \
	145	"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
	146	"if tftp ${update_spi_firmware_addr} " \
	147	"${update_spi_firmware_filename} ; then " \
	148	"setenv update_spi_firmware_filesize ${filesize} ; " \
	149	"sf update ${update_spi_firmware_spl_addr} 0x0 " \
	150	"${update_spi_firmware_spl_filesize} ; " \
	151	"sf update ${update_spi_firmware_addr} 0x10000 " \
	152	"${update_spi_firmware_filesize} ; " \
	153	"fi ; " \
	154	"fi ; " \
	155	"fi\0" \
	156	"addcons=" \
	157	"setenv bootargs ${bootargs} " \
	158	"console=${consdev},${baudrate}\0" \
	159	"addip=" \
	160	"setenv bootargs ${bootargs} " \
	161	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	162	"${netmask}:${hostname}:${netdev}:off\0" \
	163	"addmisc=" \
	164	"setenv bootargs ${bootargs} ${miscargs}\0" \
	165	"addargs=run addcons addmisc\0" \
	166	"mmcload=" \
	167	"mmc rescan ; " \
	168	"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \
	169	"netload=" \
	170	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	171	"miscargs=nohlt panic=1\0" \
	172	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	173	"nfsargs=" \
	174	"setenv bootargs root=/dev/nfs rw " \
	175	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
e3f40720 MV	176	"fdtimg=if test ${bootmode} = \"sf\" ; then " \
	177	"setenv kernel_fdt 1 ; " \
	178	"else ; " \
	179	"setenv kernel_fdt 2 ; " \
	180	"fi\0" \
c21c28b6	181	"mmc_mmc=" \
e3f40720 MV	182	"run fdtimg mmcload mmcargs addargs ; " \
e3f40720 MV	183	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
c21c28b6	184	"mmc_nfs=" \
e3f40720 MV	185	"run fdtimg mmcload nfsargs addip addargs ; " \
e3f40720 MV	186	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
c21c28b6	187	"net_mmc=" \
e3f40720 MV	188	"run fdtimg netload mmcargs addargs ; " \
e3f40720 MV	189	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
c21c28b6	190	"net_nfs=" \
e3f40720 MV	191	"run fdtimg netload nfsargs addip addargs ; " \
e3f40720 MV	192	"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
c21c28b6 MV	193	"try_bootscript=" \
c21c28b6 MV	194	"mmc rescan;" \
4425be39 MV	195	"if test -e mmc 1:1 ${bootscript} ; then " \
4425be39 MV	196	"if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \
c21c28b6 MV	197	"then ; " \
	198	"echo Running bootscript... ; " \
	199	"source ${kernel_addr_r} ; " \
	200	"fi ; " \
	201	"fi\0"
	202	/* SPL */
	203	#define CONFIG_SPL_FRAMEWORK
	204	#define CONFIG_SPL_TEXT_BASE 0x200000
	205	#define CONFIG_SPL_MAX_SIZE 0x10000
	206	#define CONFIG_SPL_BSS_START_ADDR 0x20000000
	207	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
	208	#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
	209	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
	210
c21c28b6 MV	211	#define CONFIG_SYS_MONITOR_LEN (512 << 10)
c21c28b6 MV	212
c21c28b6 MV	213	#define CONFIG_SPL_SPI_LOAD
	214	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
	215
4e843834	216	#define CONFIG_SYS_USE_MMC
4e843834 MV	217	#define CONFIG_SPL_MMC_SUPPORT
	218	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
	219	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
	220	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
	221	#define CONFIG_SPL_FAT_SUPPORT
	222	#define CONFIG_SPL_LIBDISK_SUPPORT
	223
c21c28b6	224	#endif /* __MA5D4EVK_CONFIG_H__ */