]>
Commit | Line | Data |
---|---|---|
ad9bc8e5 | 1 | /* |
741de266 SP |
2 | * Configuration settings for the TI OMAP3 EVM board. |
3 | * | |
4 | * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ | |
5 | * | |
ad9bc8e5 DB |
6 | * Author : |
7 | * Manikandan Pillai <mani.pillai@ti.com> | |
8 | * Derived from Beagle Board and 3430 SDP code by | |
9 | * Richard Woodruff <r-woodruff2@ti.com> | |
10 | * Syed Mohammed Khasim <khasim@ti.com> | |
11 | * | |
12 | * Manikandan Pillai <mani.pillai@ti.com> | |
13 | * | |
3765b3e7 | 14 | * SPDX-License-Identifier: GPL-2.0+ |
ad9bc8e5 DB |
15 | */ |
16 | ||
741de266 SP |
17 | #ifndef __OMAP3EVM_CONFIG_H |
18 | #define __OMAP3EVM_CONFIG_H | |
19 | ||
20 | #include <asm/arch/cpu.h> | |
987ec585 | 21 | #include <asm/arch/omap.h> |
741de266 | 22 | |
741de266 | 23 | /* ---------------------------------------------------------------------------- |
a187559e | 24 | * Supported U-Boot commands |
741de266 SP |
25 | * ---------------------------------------------------------------------------- |
26 | */ | |
1ee6d31f | 27 | |
3970884c | 28 | #define CONFIG_CMD_JFFS2 |
741de266 | 29 | |
3970884c | 30 | #define CONFIG_CMD_NAND |
741de266 | 31 | |
741de266 | 32 | /* ---------------------------------------------------------------------------- |
a187559e | 33 | * Supported U-Boot features |
741de266 SP |
34 | * ---------------------------------------------------------------------------- |
35 | */ | |
36 | #define CONFIG_SYS_LONGHELP | |
741de266 SP |
37 | |
38 | /* Display CPU and Board information */ | |
39 | #define CONFIG_DISPLAY_CPUINFO | |
40 | #define CONFIG_DISPLAY_BOARDINFO | |
41 | ||
42 | /* Allow to overwrite serial and ethaddr */ | |
43 | #define CONFIG_ENV_OVERWRITE | |
44 | ||
45 | /* Add auto-completion support */ | |
46 | #define CONFIG_AUTO_COMPLETE | |
47 | ||
48 | /* ---------------------------------------------------------------------------- | |
49 | * Supported hardware | |
50 | * ---------------------------------------------------------------------------- | |
51 | */ | |
52 | ||
53 | /* MMC */ | |
54 | #define CONFIG_MMC | |
55 | #define CONFIG_GENERIC_MMC | |
56 | #define CONFIG_OMAP_HSMMC | |
673283f3 TR |
57 | |
58 | /* SPL */ | |
673283f3 TR |
59 | #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ |
60 | #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ | |
e2ccdf89 | 61 | #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 |
205b4f33 | 62 | #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" |
673283f3 TR |
63 | |
64 | /* Partition tables */ | |
35e3f6d7 | 65 | #define CONFIG_EFI_PARTITION |
673283f3 | 66 | #define CONFIG_DOS_PARTITION |
741de266 SP |
67 | |
68 | /* USB | |
69 | * | |
95de1e2f PK |
70 | * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard |
71 | * Enable CONFIG_USB_MUSB_UDD for Device functionalities. | |
741de266 SP |
72 | */ |
73 | #define CONFIG_USB_OMAP3 | |
95de1e2f PK |
74 | #define CONFIG_USB_MUSB_HCD |
75 | /* #define CONFIG_USB_MUSB_UDC */ | |
741de266 | 76 | |
673283f3 TR |
77 | /* NAND SPL */ |
78 | #define CONFIG_SPL_NAND_SIMPLE | |
6f2f01b9 SW |
79 | #define CONFIG_SPL_NAND_BASE |
80 | #define CONFIG_SPL_NAND_DRIVERS | |
81 | #define CONFIG_SPL_NAND_ECC | |
673283f3 TR |
82 | #define CONFIG_SYS_NAND_5_ADDR_CYCLE |
83 | #define CONFIG_SYS_NAND_PAGE_COUNT 64 | |
84 | #define CONFIG_SYS_NAND_PAGE_SIZE 2048 | |
85 | #define CONFIG_SYS_NAND_OOBSIZE 64 | |
86 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) | |
87 | #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 | |
88 | #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ | |
89 | 10, 11, 12, 13} | |
90 | #define CONFIG_SYS_NAND_ECCSIZE 512 | |
91 | #define CONFIG_SYS_NAND_ECCBYTES 3 | |
3f719069 | 92 | #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW |
673283f3 TR |
93 | #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE |
94 | #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 | |
95 | ||
584550d7 TR |
96 | /* |
97 | * High level configuration options | |
98 | */ | |
99 | #define CONFIG_OMAP /* This is TI OMAP core */ | |
100 | #define CONFIG_OMAP_GPIO | |
101 | #define CONFIG_OMAP_COMMON | |
102 | /* Common ARM Erratas */ | |
103 | #define CONFIG_ARM_ERRATA_454179 | |
104 | #define CONFIG_ARM_ERRATA_430973 | |
105 | #define CONFIG_ARM_ERRATA_621766 | |
106 | ||
107 | #define CONFIG_SDRC /* The chip has SDRC controller */ | |
108 | ||
109 | #define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ | |
110 | #define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ | |
111 | ||
112 | /* | |
113 | * Clock related definitions | |
114 | */ | |
115 | #define V_OSCK 26000000 /* Clock output from T2 */ | |
116 | #define V_SCLK (V_OSCK >> 1) | |
117 | ||
118 | /* | |
119 | * OMAP3 has 12 GP timers, they can be driven by the system clock | |
120 | * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). | |
121 | * This rate is divided by a local divisor. | |
122 | */ | |
123 | #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 | |
124 | #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ | |
125 | ||
126 | /* Size of environment - 128KB */ | |
127 | #define CONFIG_ENV_SIZE (128 << 10) | |
128 | ||
129 | /* Size of malloc pool */ | |
130 | #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) | |
131 | ||
132 | /* | |
133 | * Physical Memory Map | |
134 | * Note 1: CS1 may or may not be populated | |
135 | * Note 2: SDRAM size is expected to be at least 32MB | |
136 | */ | |
137 | #define CONFIG_NR_DRAM_BANKS 2 | |
138 | #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 | |
139 | #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 | |
140 | ||
141 | /* Limits for memtest */ | |
142 | #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) | |
143 | #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ | |
144 | 0x01F00000) /* 31MB */ | |
145 | ||
146 | /* Default load address */ | |
147 | #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) | |
148 | ||
741de266 | 149 | /* ----------------------------------------------------------------------------- |
584550d7 | 150 | * Hardware drivers |
ee8e2254 | 151 | * ----------------------------------------------------------------------------- |
ad9bc8e5 | 152 | */ |
584550d7 TR |
153 | |
154 | /* | |
155 | * NS16550 Configuration | |
156 | */ | |
157 | #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ | |
158 | ||
159 | #define CONFIG_SYS_NS16550_SERIAL | |
160 | #define CONFIG_SYS_NS16550_REG_SIZE (-4) | |
161 | #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK | |
162 | ||
163 | /* | |
164 | * select serial console configuration | |
165 | */ | |
166 | #define CONFIG_CONS_INDEX 1 | |
167 | #define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ | |
168 | #define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 | |
169 | #define CONFIG_BAUDRATE 115200 | |
170 | #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ | |
171 | 115200} | |
172 | ||
173 | /* | |
174 | * I2C | |
175 | */ | |
176 | #define CONFIG_SYS_I2C | |
177 | #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 | |
178 | #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 | |
179 | #define CONFIG_SYS_I2C_OMAP34XX | |
180 | ||
181 | /* | |
182 | * PISMO support | |
183 | */ | |
184 | /* Monitor at start of flash - Reserve 2 sectors */ | |
185 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE | |
186 | ||
187 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) | |
188 | ||
189 | /* Start location & size of environment */ | |
190 | #define ONENAND_ENV_OFFSET 0x260000 | |
191 | #define SMNAND_ENV_OFFSET 0x260000 | |
192 | ||
193 | #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ | |
194 | ||
195 | /* | |
196 | * NAND | |
197 | */ | |
198 | /* Physical address to access NAND */ | |
199 | #define CONFIG_SYS_NAND_ADDR NAND_BASE | |
200 | ||
201 | /* Physical address to access NAND at CS0 */ | |
202 | #define CONFIG_SYS_NAND_BASE NAND_BASE | |
203 | ||
204 | /* Max number of NAND devices */ | |
205 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
206 | #define CONFIG_SYS_NAND_BUSWIDTH_16BIT | |
207 | /* Timeout values (in ticks) */ | |
208 | #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) | |
209 | #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) | |
210 | ||
211 | /* Flash banks JFFS2 should use */ | |
212 | #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ | |
213 | CONFIG_SYS_MAX_NAND_DEVICE) | |
214 | ||
215 | #define CONFIG_SYS_JFFS2_MEM_NAND | |
216 | #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS | |
217 | #define CONFIG_SYS_JFFS2_NUM_BANKS 1 | |
218 | ||
219 | #define CONFIG_JFFS2_NAND | |
220 | /* nand device jffs2 lives on */ | |
221 | #define CONFIG_JFFS2_DEV "nand0" | |
222 | /* Start of jffs2 partition */ | |
223 | #define CONFIG_JFFS2_PART_OFFSET 0x680000 | |
224 | /* Size of jffs2 partition */ | |
225 | #define CONFIG_JFFS2_PART_SIZE 0xf980000 | |
226 | ||
227 | /* | |
228 | * USB | |
229 | */ | |
230 | #ifdef CONFIG_USB_OMAP3 | |
231 | ||
232 | #ifdef CONFIG_USB_MUSB_HCD | |
233 | ||
584550d7 TR |
234 | #define CONGIG_CMD_STORAGE |
235 | ||
236 | #ifdef CONFIG_USB_KEYBOARD | |
237 | #define CONFIG_SYS_USB_EVENT_POLL | |
238 | #define CONFIG_PREBOOT "usb start" | |
239 | #endif /* CONFIG_USB_KEYBOARD */ | |
240 | ||
241 | #endif /* CONFIG_USB_MUSB_HCD */ | |
242 | ||
243 | #ifdef CONFIG_USB_MUSB_UDC | |
244 | /* USB device configuration */ | |
245 | #define CONFIG_USB_DEVICE | |
246 | #define CONFIG_USB_TTY | |
247 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV | |
248 | ||
249 | /* Change these to suit your needs */ | |
250 | #define CONFIG_USBD_VENDORID 0x0451 | |
251 | #define CONFIG_USBD_PRODUCTID 0x5678 | |
252 | #define CONFIG_USBD_MANUFACTURER "Texas Instruments" | |
253 | #define CONFIG_USBD_PRODUCT_NAME "EVM" | |
254 | #endif /* CONFIG_USB_MUSB_UDC */ | |
255 | ||
256 | #endif /* CONFIG_USB_OMAP3 */ | |
257 | ||
258 | /* ---------------------------------------------------------------------------- | |
259 | * U-Boot features | |
260 | * ---------------------------------------------------------------------------- | |
261 | */ | |
262 | #define CONFIG_SYS_MAXARGS 16 /* max args for a command */ | |
263 | ||
264 | #define CONFIG_MISC_INIT_R | |
265 | ||
266 | #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ | |
267 | #define CONFIG_SETUP_MEMORY_TAGS | |
268 | #define CONFIG_INITRD_TAG | |
269 | #define CONFIG_REVISION_TAG | |
270 | ||
271 | /* Size of Console IO buffer */ | |
272 | #define CONFIG_SYS_CBSIZE 512 | |
273 | ||
274 | /* Size of print buffer */ | |
275 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
276 | sizeof(CONFIG_SYS_PROMPT) + 16) | |
277 | ||
278 | /* Size of bootarg buffer */ | |
279 | #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) | |
280 | ||
281 | #define CONFIG_BOOTFILE "uImage" | |
282 | ||
283 | /* | |
284 | * NAND / OneNAND | |
285 | */ | |
286 | #if defined(CONFIG_CMD_NAND) | |
287 | #define CONFIG_SYS_FLASH_BASE NAND_BASE | |
288 | ||
289 | #define CONFIG_NAND_OMAP_GPMC | |
290 | #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET | |
291 | #elif defined(CONFIG_CMD_ONENAND) | |
292 | #define CONFIG_SYS_FLASH_BASE ONENAND_MAP | |
293 | #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP | |
294 | #endif | |
295 | ||
296 | #if !defined(CONFIG_ENV_IS_NOWHERE) | |
297 | #if defined(CONFIG_CMD_NAND) | |
298 | #define CONFIG_ENV_IS_IN_NAND | |
299 | #elif defined(CONFIG_CMD_ONENAND) | |
300 | #define CONFIG_ENV_IS_IN_ONENAND | |
301 | #define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET | |
302 | #endif | |
303 | #endif /* CONFIG_ENV_IS_NOWHERE */ | |
304 | ||
305 | #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET | |
306 | ||
307 | #if defined(CONFIG_CMD_NET) | |
308 | ||
309 | /* Ethernet (SMSC9115 from SMSC9118 family) */ | |
310 | #define CONFIG_SMC911X | |
311 | #define CONFIG_SMC911X_32_BIT | |
312 | #define CONFIG_SMC911X_BASE 0x2C000000 | |
313 | ||
314 | /* BOOTP fields */ | |
315 | #define CONFIG_BOOTP_SUBNETMASK 0x00000001 | |
316 | #define CONFIG_BOOTP_GATEWAY 0x00000002 | |
317 | #define CONFIG_BOOTP_HOSTNAME 0x00000004 | |
318 | #define CONFIG_BOOTP_BOOTPATH 0x00000010 | |
319 | ||
320 | #endif /* CONFIG_CMD_NET */ | |
321 | ||
322 | /* Support for relocation */ | |
323 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 | |
324 | #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 | |
325 | #define CONFIG_SYS_INIT_RAM_SIZE 0x800 | |
326 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ | |
327 | CONFIG_SYS_INIT_RAM_SIZE - \ | |
328 | GENERATED_GBL_DATA_SIZE) | |
329 | ||
330 | /* ----------------------------------------------------------------------------- | |
331 | * Board specific | |
332 | * ----------------------------------------------------------------------------- | |
333 | */ | |
334 | #define CONFIG_SYS_NO_FLASH | |
335 | ||
336 | /* Uncomment to define the board revision statically */ | |
337 | /* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ | |
338 | ||
584550d7 TR |
339 | /* Defines for SPL */ |
340 | #define CONFIG_SPL_FRAMEWORK | |
341 | #define CONFIG_SPL_TEXT_BASE 0x40200800 | |
fa2f81b0 TR |
342 | #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ |
343 | CONFIG_SPL_TEXT_BASE) | |
584550d7 TR |
344 | |
345 | #define CONFIG_SPL_BSS_START_ADDR 0x80000000 | |
346 | #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ | |
347 | ||
348 | #define CONFIG_SPL_BOARD_INIT | |
584550d7 TR |
349 | #define CONFIG_SPL_OMAP3_ID_NAND |
350 | #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" | |
351 | ||
352 | /* | |
353 | * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM | |
354 | * 64 bytes before this address should be set aside for u-boot.img's | |
355 | * header. That is 0x800FFFC0--0x80100000 should not be used for any | |
356 | * other needs. | |
357 | */ | |
358 | #define CONFIG_SYS_TEXT_BASE 0x80100000 | |
359 | #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 | |
360 | #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 | |
ad9bc8e5 | 361 | |
ee8e2254 SP |
362 | /* ----------------------------------------------------------------------------- |
363 | * Default environment | |
364 | * ----------------------------------------------------------------------------- | |
365 | */ | |
136cf92d | 366 | |
ad9bc8e5 DB |
367 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
368 | "loadaddr=0x82000000\0" \ | |
73c8640e | 369 | "usbtty=cdc_acm\0" \ |
dcc4f38b | 370 | "mmcdev=0\0" \ |
effeda55 | 371 | "console=ttyO0,115200n8\0" \ |
ad9bc8e5 DB |
372 | "mmcargs=setenv bootargs console=${console} " \ |
373 | "root=/dev/mmcblk0p2 rw " \ | |
374 | "rootfstype=ext3 rootwait\0" \ | |
375 | "nandargs=setenv bootargs console=${console} " \ | |
376 | "root=/dev/mtdblock4 rw " \ | |
377 | "rootfstype=jffs2\0" \ | |
dcc4f38b | 378 | "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ |
ad9bc8e5 | 379 | "bootscript=echo Running bootscript from mmc ...; " \ |
74de7aef | 380 | "source ${loadaddr}\0" \ |
dcc4f38b | 381 | "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ |
ad9bc8e5 DB |
382 | "mmcboot=echo Booting from mmc ...; " \ |
383 | "run mmcargs; " \ | |
384 | "bootm ${loadaddr}\0" \ | |
385 | "nandboot=echo Booting from nand ...; " \ | |
386 | "run nandargs; " \ | |
387 | "onenand read ${loadaddr} 280000 400000; " \ | |
388 | "bootm ${loadaddr}\0" \ | |
389 | ||
390 | #define CONFIG_BOOTCOMMAND \ | |
66968110 | 391 | "mmc dev ${mmcdev}; if mmc rescan; then " \ |
ad9bc8e5 DB |
392 | "if run loadbootscript; then " \ |
393 | "run bootscript; " \ | |
394 | "else " \ | |
395 | "if run loaduimage; then " \ | |
396 | "run mmcboot; " \ | |
397 | "else run nandboot; " \ | |
398 | "fi; " \ | |
399 | "fi; " \ | |
400 | "else run nandboot; fi" | |
401 | ||
741de266 | 402 | #endif /* __OMAP3EVM_CONFIG_H */ |