[people/ms/u-boot.git] / include / configs / pcm052.h

/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the phytec PCM-052 SoM.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>

#define CONFIG_SKIP_LOWLEVEL_INIT

/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_SYS_NAND_ONFI_DETECTION

#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

#define CONFIG_JFFS2_NAND

/* UBI */
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_LZO

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE

#ifndef MTDIDS_DEFAULT
#define MTDIDS_DEFAULT			"nand0=NAND"
#endif

#ifndef MTDPARTS_DEFAULT
#define MTDPARTS_DEFAULT		"mtdparts=NAND:640k(bootloader)"\
					",128k(env1)"\
					",128k(env2)"\
					",128k(dtb)"\
					",6144k(kernel)"\
					",-(root)"
#endif

#endif

#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

/*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

/* QSPI Configs*/

#ifdef CONFIG_FSL_QSPI
#define FSL_QSPI_FLASH_SIZE		(1 << 24)
#define FSL_QSPI_FLASH_NUM		2
#define CONFIG_SYS_FSL_QSPI_LE
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_SYS_I2C_MXC

/* RTC (actually an RV-4162 but M41T62-compatible) */
#define CONFIG_CMD_DATE
#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_SYS_RTC_BUS_NUM 2

/* EEPROM (24FC256) */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_EEPROM_BUS 2


#define CONFIG_LOADADDR			0x82000000

/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE		0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT		524288

/* if no target-specific extra environment settings were defined by the
   target, define an empty one */
#ifndef PCM052_EXTRA_ENV_SETTINGS
#define PCM052_EXTRA_ENV_SETTINGS
#endif

/* if no target-specific boot command was defined by the target,
   define an empty one */
#ifndef PCM052_BOOTCOMMAND
#define PCM052_BOOTCOMMAND
#endif

/* if no target-specific extra environment settings were defined by the
   target, define an empty one */
#ifndef PCM052_NET_INIT
#define PCM052_NET_INIT
#endif

/* boot command, including the target-defined one if any */
#define CONFIG_BOOTCOMMAND	PCM052_BOOTCOMMAND "run bootcmd_nand"

/* Extra env settings (including the target-defined ones if any) */
#define CONFIG_EXTRA_ENV_SETTINGS \
	PCM052_EXTRA_ENV_SETTINGS \
	"autoload=no\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"blimg_file=u-boot.vyb\0" \
	"blimg_addr=0x81000000\0" \
	"kernel_file=zImage\0" \
	"kernel_addr=0x82000000\0" \
	"fdt_file=zImage.dtb\0" \
	"fdt_addr=0x81000000\0" \
	"ram_file=uRamdisk\0" \
	"ram_addr=0x83000000\0" \
	"filesys=rootfs.ubifs\0" \
	"sys_addr=0x81000000\0" \
	"tftploc=/path/to/tftp/directory/\0" \
	"nfs_root=/path/to/nfs/root\0" \
	"tftptimeout=1000\0" \
	"tftptimeoutcountmax=1000000\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"bootargs_base=setenv bootargs rw " \
		" mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \
		"console=ttyLP1,115200n8\0" \
	"bootargs_sd=setenv bootargs ${bootargs} " \
		"root=/dev/mmcblk0p2 rootwait\0" \
	"bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \
		"nfsroot=${serverip}:${nfs_root},v3,tcp\0" \
	"bootargs_nand=setenv bootargs ${bootargs} " \
		"ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \
	"bootargs_ram=setenv bootargs ${bootargs} " \
		"root=/dev/ram rw initrd=${ram_addr}\0" \
	"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
		"fatload mmc 0:1 ${kernel_addr} ${kernel_file}; " \
		"fatload mmc 0:1 ${fdt_addr} ${fdt_file}; " \
		"bootz ${kernel_addr} - ${fdt_addr}\0" \
	"bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \
		"tftpboot ${kernel_addr} ${tftpdir}${kernel_file}; " \
		"tftpboot ${fdt_addr} ${tftpdir}${fdt_file}; " \
		"bootz ${kernel_addr} - ${fdt_addr}\0" \
	"bootcmd_nand=run bootargs_base bootargs_nand bootargs_mtd; " \
		"nand read ${fdt_addr} dtb; " \
		"nand read ${kernel_addr} kernel; " \
		"bootz ${kernel_addr} - ${fdt_addr}\0" \
	"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
		"nand read ${fdt_addr} dtb; " \
		"nand read ${kernel_addr} kernel; " \
		"nand read ${ram_addr} root; " \
		"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
	"update_bootloader_from_tftp=" PCM052_NET_INIT \
		"if tftp ${blimg_addr} "\
		"${tftpdir}${blimg_file}; then " \
		"mtdparts default; " \
		"nand erase.part bootloader; " \
		"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
	"update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \
		"${kernel_file}; " \
		"then mtdparts default; " \
		"nand erase.part kernel; " \
		"nand write ${kernel_addr} kernel ${filesize}; " \
		"if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \
		"nand erase.part dtb; " \
		"nand write ${fdt_addr} dtb ${filesize}; fi\0" \
	"update_kernel_from_tftp=" PCM052_NET_INIT \
		"if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
		"then setenv fdtsize ${filesize}; " \
		"if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \
		"mtdparts default; " \
		"nand erase.part dtb; " \
		"nand write ${fdt_addr} dtb ${fdtsize}; " \
		"nand erase.part kernel; " \
		"nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \
	"update_rootfs_from_tftp=" PCM052_NET_INIT \
		"if tftp ${sys_addr} ${tftpdir}${filesys}; " \
		"then mtdparts default; " \
		"nand erase.part root; " \
		"ubi part root; " \
		"ubi create rootfs; " \
		"ubi write ${sys_addr} rootfs ${filesize}; fi\0" \
	"update_ramdisk_from_tftp=" PCM052_NET_INIT \
		"if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
		"then mtdparts default; " \
		"nand erase.part root; " \
		"nand write ${ram_addr} root ${filesize}; fi\0"

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(CONFIG_PCM052_DDR_SIZE * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* environment organization */
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#endif

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
#define CONFIG_ENV_SIZE			(8 * 1024)
#define CONFIG_ENV_OFFSET		0xA0000
#define CONFIG_ENV_SIZE_REDUND		(8 * 1024)
#define CONFIG_ENV_OFFSET_REDUND	0xC0000
#endif

#endif
Commit	Line	Data
931a1d2a AA	1	/*
	2	* Copyright 2013 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the phytec PCM-052 SoM.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include <asm/arch/imx-regs.h>
	13
931a1d2a AA	14	#define CONFIG_SKIP_LOWLEVEL_INIT
	15
	16	/* Enable passing of ATAGs */
	17	#define CONFIG_CMDLINE_TAG
	18
	19	/* Size of malloc() pool */
	20	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	21
931a1d2a AA	22	/* Allow to overwrite serial and ethaddr */
931a1d2a AA	23	#define CONFIG_ENV_OVERWRITE
931a1d2a	24
931a1d2a AA	25	/* NAND support */
	26	#define CONFIG_CMD_NAND
	27	#define CONFIG_CMD_NAND_TRIMFFS
	28	#define CONFIG_SYS_NAND_ONFI_DETECTION
	29
	30	#ifdef CONFIG_CMD_NAND
931a1d2a AA	31	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	32	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	33
	34	#define CONFIG_JFFS2_NAND
	35
	36	/* UBI */
931a1d2a AA	37	#define CONFIG_CMD_UBIFS
	38	#define CONFIG_RBTREE
	39	#define CONFIG_LZO
	40
	41	/* Dynamic MTD partition support */
	42	#define CONFIG_CMD_MTDPARTS
	43	#define CONFIG_MTD_PARTITIONS
	44	#define CONFIG_MTD_DEVICE
27192d16 AA	45
27192d16 AA	46	#ifndef MTDIDS_DEFAULT
040ef8f5	47	#define MTDIDS_DEFAULT "nand0=NAND"
27192d16 AA	48	#endif
	49
	50	#ifndef MTDPARTS_DEFAULT
27f7d4f5	51	#define MTDPARTS_DEFAULT "mtdparts=NAND:640k(bootloader)"\
931a1d2a AA	52	",128k(env1)"\
931a1d2a AA	53	",128k(env2)"\
040ef8f5 AA	54	",128k(dtb)"\
040ef8f5 AA	55	",6144k(kernel)"\
27f7d4f5	56	",-(root)"
931a1d2a AA	57	#endif
931a1d2a AA	58
27192d16 AA	59	#endif
27192d16 AA	60
931a1d2a AA	61	#define CONFIG_FSL_ESDHC
	62	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	63	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	64
	65	/#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1/
931a1d2a	66
931a1d2a AA	67	#define CONFIG_FEC_MXC
	68	#define CONFIG_MII
	69	#define IMX_FEC_BASE ENET_BASE_ADDR
	70	#define CONFIG_FEC_XCV_TYPE RMII
	71	#define CONFIG_FEC_MXC_PHYADDR 0
	72	#define CONFIG_PHYLIB
	73	#define CONFIG_PHY_MICREL
	74
	75	/* QSPI Configs*/
931a1d2a AA	76
931a1d2a AA	77	#ifdef CONFIG_FSL_QSPI
931a1d2a AA	78	#define FSL_QSPI_FLASH_SIZE (1 << 24)
	79	#define FSL_QSPI_FLASH_NUM 2
	80	#define CONFIG_SYS_FSL_QSPI_LE
	81	#endif
	82
	83	/* I2C Configs */
931a1d2a AA	84	#define CONFIG_SYS_I2C
	85	#define CONFIG_SYS_I2C_MXC_I2C3
	86	#define CONFIG_SYS_I2C_MXC
	87
	88	/* RTC (actually an RV-4162 but M41T62-compatible) */
	89	#define CONFIG_CMD_DATE
	90	#define CONFIG_RTC_M41T62
	91	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	92	#define CONFIG_SYS_RTC_BUS_NUM 2
	93
	94	/* EEPROM (24FC256) */
	95	#define CONFIG_CMD_EEPROM
	96	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	97	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	98	#define CONFIG_SYS_I2C_EEPROM_BUS 2
	99
931a1d2a AA	100
	101	#define CONFIG_LOADADDR 0x82000000
	102
	103	/* We boot from the gfxRAM area of the OCRAM. */
	104	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	105	#define CONFIG_BOARD_SIZE_LIMIT 524288
	106
27192d16 AA	107	/* if no target-specific extra environment settings were defined by the
	108	target, define an empty one */
	109	#ifndef PCM052_EXTRA_ENV_SETTINGS
	110	#define PCM052_EXTRA_ENV_SETTINGS
	111	#endif
	112
	113	/* if no target-specific boot command was defined by the target,
	114	define an empty one */
	115	#ifndef PCM052_BOOTCOMMAND
	116	#define PCM052_BOOTCOMMAND
	117	#endif
	118
	119	/* if no target-specific extra environment settings were defined by the
	120	target, define an empty one */
	121	#ifndef PCM052_NET_INIT
	122	#define PCM052_NET_INIT
	123	#endif
	124
	125	/* boot command, including the target-defined one if any */
	126	#define CONFIG_BOOTCOMMAND PCM052_BOOTCOMMAND "run bootcmd_nand"
	127
	128	/* Extra env settings (including the target-defined ones if any) */
040ef8f5	129	#define CONFIG_EXTRA_ENV_SETTINGS \
27192d16 AA	130	PCM052_EXTRA_ENV_SETTINGS \
27192d16 AA	131	"autoload=no\0" \
040ef8f5 AA	132	"fdt_high=0xffffffff\0" \
040ef8f5 AA	133	"initrd_high=0xffffffff\0" \
ed0c2c0a AA	134	"blimg_file=u-boot.vyb\0" \
ed0c2c0a AA	135	"blimg_addr=0x81000000\0" \
040ef8f5 AA	136	"kernel_file=zImage\0" \
040ef8f5 AA	137	"kernel_addr=0x82000000\0" \
083e4fd4	138	"fdt_file=zImage.dtb\0" \
040ef8f5 AA	139	"fdt_addr=0x81000000\0" \
	140	"ram_file=uRamdisk\0" \
	141	"ram_addr=0x83000000\0" \
	142	"filesys=rootfs.ubifs\0" \
	143	"sys_addr=0x81000000\0" \
	144	"tftploc=/path/to/tftp/directory/\0" \
	145	"nfs_root=/path/to/nfs/root\0" \
	146	"tftptimeout=1000\0" \
	147	"tftptimeoutcountmax=1000000\0" \
	148	"mtdparts=" MTDPARTS_DEFAULT "\0" \
a7e5f7f3 AA	149	"bootargs_base=setenv bootargs rw " \
a7e5f7f3 AA	150	" mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \
040ef8f5 AA	151	"console=ttyLP1,115200n8\0" \
	152	"bootargs_sd=setenv bootargs ${bootargs} " \
	153	"root=/dev/mmcblk0p2 rootwait\0" \
931a1d2a	154	"bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \
040ef8f5 AA	155	"nfsroot=${serverip}:${nfs_root},v3,tcp\0" \
040ef8f5 AA	156	"bootargs_nand=setenv bootargs ${bootargs} " \
27f7d4f5	157	"ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \
040ef8f5 AA	158	"bootargs_ram=setenv bootargs ${bootargs} " \
	159	"root=/dev/ram rw initrd=${ram_addr}\0" \
	160	"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	161	"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
	162	"fatload mmc 0:1 ${kernel_addr} ${kernel_file}; " \
	163	"fatload mmc 0:1 ${fdt_addr} ${fdt_file}; " \
	164	"bootz ${kernel_addr} - ${fdt_addr}\0" \
	165	"bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \
	166	"tftpboot ${kernel_addr} ${tftpdir}${kernel_file}; " \
	167	"tftpboot ${fdt_addr} ${tftpdir}${fdt_file}; " \
	168	"bootz ${kernel_addr} - ${fdt_addr}\0" \
	169	"bootcmd_nand=run bootargs_base bootargs_nand bootargs_mtd; " \
	170	"nand read ${fdt_addr} dtb; " \
	171	"nand read ${kernel_addr} kernel; " \
	172	"bootz ${kernel_addr} - ${fdt_addr}\0" \
	173	"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
	174	"nand read ${fdt_addr} dtb; " \
	175	"nand read ${kernel_addr} kernel; " \
27f7d4f5	176	"nand read ${ram_addr} root; " \
040ef8f5	177	"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
27192d16 AA	178	"update_bootloader_from_tftp=" PCM052_NET_INIT \
27192d16 AA	179	"if tftp ${blimg_addr} "\
ed0c2c0a AA	180	"${tftpdir}${blimg_file}; then " \
ed0c2c0a AA	181	"mtdparts default; " \
040ef8f5	182	"nand erase.part bootloader; " \
ed0c2c0a	183	"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
040ef8f5 AA	184	"update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \
	185	"${kernel_file}; " \
	186	"then mtdparts default; " \
	187	"nand erase.part kernel; " \
	188	"nand write ${kernel_addr} kernel ${filesize}; " \
	189	"if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \
	190	"nand erase.part dtb; " \
	191	"nand write ${fdt_addr} dtb ${filesize}; fi\0" \
27192d16 AA	192	"update_kernel_from_tftp=" PCM052_NET_INIT \
27192d16 AA	193	"if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
040ef8f5 AA	194	"then setenv fdtsize ${filesize}; " \
	195	"if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \
	196	"mtdparts default; " \
	197	"nand erase.part dtb; " \
	198	"nand write ${fdt_addr} dtb ${fdtsize}; " \
	199	"nand erase.part kernel; " \
	200	"nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \
27192d16 AA	201	"update_rootfs_from_tftp=" PCM052_NET_INIT \
27192d16 AA	202	"if tftp ${sys_addr} ${tftpdir}${filesys}; " \
040ef8f5 AA	203	"then mtdparts default; " \
	204	"nand erase.part root; " \
	205	"ubi part root; " \
	206	"ubi create rootfs; " \
	207	"ubi write ${sys_addr} rootfs ${filesize}; fi\0" \
27192d16 AA	208	"update_ramdisk_from_tftp=" PCM052_NET_INIT \
27192d16 AA	209	"if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
040ef8f5	210	"then mtdparts default; " \
27f7d4f5 AA	211	"nand erase.part root; " \
27f7d4f5 AA	212	"nand write ${ram_addr} root ${filesize}; fi\0"
931a1d2a	213
931a1d2a AA	214	/* Miscellaneous configurable options */
931a1d2a AA	215	#define CONFIG_SYS_LONGHELP /* undef to save memory */
931a1d2a AA	216	#define CONFIG_AUTO_COMPLETE
	217	#define CONFIG_CMDLINE_EDITING
	218	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	219	#define CONFIG_SYS_PBSIZE \
	220	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	221	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	222	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	223
931a1d2a AA	224	#define CONFIG_SYS_MEMTEST_START 0x80010000
	225	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	226
	227	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	228
	229	/*
	230	* Stack sizes
	231	* The stack sizes are set up in start.S using the settings below
	232	*/
	233	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	234
	235	/* Physical memory map */
	236	#define CONFIG_NR_DRAM_BANKS 1
	237	#define PHYS_SDRAM (0x80000000)
a7e5f7f3	238	#define PHYS_SDRAM_SIZE (CONFIG_PCM052_DDR_SIZE * 1024 * 1024)
931a1d2a AA	239
	240	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	241	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	242	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	243
	244	#define CONFIG_SYS_INIT_SP_OFFSET \
	245	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	246	#define CONFIG_SYS_INIT_SP_ADDR \
	247	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	248
e856bdcf	249	/* environment organization */
931a1d2a AA	250	#ifdef CONFIG_ENV_IS_IN_MMC
	251	#define CONFIG_ENV_SIZE (8 * 1024)
	252
	253	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	254	#define CONFIG_SYS_MMC_ENV_DEV 0
	255	#endif
	256
	257	#ifdef CONFIG_ENV_IS_IN_NAND
	258	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	259	#define CONFIG_ENV_SIZE (8 * 1024)
040ef8f5	260	#define CONFIG_ENV_OFFSET 0xA0000
931a1d2a	261	#define CONFIG_ENV_SIZE_REDUND (8 * 1024)
040ef8f5	262	#define CONFIG_ENV_OFFSET_REDUND 0xC0000
931a1d2a AA	263	#endif
931a1d2a AA	264
931a1d2a	265	#endif