]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/pogo_e02.h
arm, powerpc: select SYS_GENERIC_BOARD
[people/ms/u-boot.git] / include / configs / pogo_e02.h
CommitLineData
1d0f5fa1
DP
1/*
2 * Copyright (C) 2012
3 * David Purdy <david.c.purdy@gmail.com>
4 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
1a459660 10 * SPDX-License-Identifier: GPL-2.0+
1d0f5fa1
DP
11 */
12
13#ifndef _CONFIG_POGO_E02_H
14#define _CONFIG_POGO_E02_H
15
604a0dd6 16
1d0f5fa1
DP
17/*
18 * Machine type definition and ID
19 */
20#define MACH_TYPE_POGO_E02 3542
21#define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02
22#define CONFIG_IDENT_STRING "\nPogo E02"
23
24/*
25 * High Level Configuration Options (easy to change)
26 */
27#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
1d0f5fa1
DP
28#define CONFIG_KW88F6281 /* SOC Name */
29#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
30
31/*
32 * Commands configuration
33 */
34#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
35#define CONFIG_SYS_MVFS
1d0f5fa1
DP
36#define CONFIG_CMD_DHCP
37#define CONFIG_CMD_ENV
38#define CONFIG_CMD_MII
39#define CONFIG_CMD_NAND
40#define CONFIG_CMD_PING
41#define CONFIG_CMD_USB
42
43/*
44 * mv-common.h should be defined after CMD configs since it used them
45 * to enable certain macros
46 */
47#include "mv-common.h"
48
1d0f5fa1
DP
49/*
50 * Environment variables configurations
51 */
52#ifdef CONFIG_CMD_NAND
53#define CONFIG_ENV_IS_IN_NAND
54#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
55#else
56#define CONFIG_ENV_IS_NOWHERE
57#endif
58
59#define CONFIG_ENV_SIZE 0x20000 /* 128k */
60#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
61
62/*
63 * Default environment variables
64 */
65#define CONFIG_BOOTCOMMAND \
66 "setenv bootargs $(bootargs_console); " \
67 "run bootcmd_usb; " \
68 "bootm 0x00800000 0x01100000"
69
70#define CONFIG_EXTRA_ENV_SETTINGS \
71 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
72 "32M(rootfs),-(data)\0"\
73 "mtdids=nand0=orion_nand\0"\
74 "bootargs_console=console=ttyS0,115200\0" \
75 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
76 "ext2load usb 0:1 0x01100000 /uInitrd\0"
77
78/*
79 * Ethernet Driver configuration
80 */
81#ifdef CONFIG_CMD_NET
82#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
83#define CONFIG_PHY_BASE_ADR 0
84#endif /* CONFIG_CMD_NET */
85
86/*
87 * File system
88 */
89#define CONFIG_CMD_EXT2
90#define CONFIG_CMD_FAT
91#define CONFIG_CMD_JFFS2
92#define CONFIG_CMD_UBI
93#define CONFIG_CMD_UBIFS
94#define CONFIG_RBTREE
95#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
96#define CONFIG_MTD_PARTITIONS
97#define CONFIG_CMD_MTDPARTS
98#define CONFIG_LZO
99
100#endif /* _CONFIG_POGO_E02_H */