[people/ms/u-boot.git] / include / configs / tao3530.h

/*
 * Configuration settings for the TechNexion TAO-3530 SOM
 * equipped on Thunder baseboard.
 *
 * Edward Lin <linuxfae@technexion.com>
 * Tapani Utriainen <linuxfae@technexion.com>
 *
 * Copyright (C) 2013 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_OMAP			/* in a TI OMAP core */

#define CONFIG_OMAP_GPIO

#define CONFIG_SDRC			/* Has an SDRC controller */

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap.h>

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#define CONFIG_MISC_INIT_R

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(4 << 20)
#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB sector */

/*
 * Hardware drivers
 */

/*
 * NS16550 Configuration
 */
#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */

#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

/*
 * select serial console configuration
 */
#define CONFIG_CONS_INDEX		3
#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* GPIO banks */
#define CONFIG_OMAP3_GPIO_2		/* GPIO32 ..63  is in GPIO bank 2 */
#define CONFIG_OMAP3_GPIO_3		/* GPIO64 ..95  is in GPIO bank 3 */
#define CONFIG_OMAP3_GPIO_4		/* GPIO96 ..127 is in GPIO bank 4 */
#define CONFIG_OMAP3_GPIO_5		/* GPIO128..159 is in GPIO bank 5 */
#define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */

/* commands to include */
#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT			"nand0=nand"
#define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
					"1920k(u-boot),128k(u-boot-env),"\
					"4m(kernel),-(fs)"

#define CONFIG_CMD_NAND		/* NAND support			*/

#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
#define CONFIG_I2C_MULTI_BUS

/*
 * TWL4030
 */
#define CONFIG_TWL4030_POWER
#define CONFIG_TWL4030_LED

/*
 * Board NAND Info.
 */
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
							/* to access nand */
#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
							/* to access nand at */
							/* CS0 */

#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
							/* devices */
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
/* Environment information */

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x82000000\0" \
	"console=ttyO2,115200n8\0" \
	"mpurate=600\0" \
	"dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \
	"tv_mode=omapfb.mode=tv:ntsc\0" \
	"video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
	"lcd_mode=omapfb.mode=lcd:800x480@60 \0" \
	"extra_options= \0" \
	"mmcdev=0\0" \
	"mmcroot=/dev/mmcblk0p2 rw\0" \
	"mmcrootfstype=ext3 rootwait\0" \
	"nandroot=ubi0:rootfs ubi.mtd=4\0" \
	"nandrootfstype=ubifs\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"${video_mode} " \
		"root=${mmcroot} " \
		"rootfstype=${mmcrootfstype} " \
		"${extra_options}\0" \
	"nandargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"${video_mode} " \
		"${network_setting} " \
		"root=${nandroot} " \
		"rootfstype=${nandrootfstype} "\
		"${extra_options}\0" \
	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source ${loadaddr}\0" \
	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${loadaddr}\0" \
	"nandboot=echo Booting from nand ...; " \
		"run nandargs; " \
		"nand read ${loadaddr} 280000 400000; " \
		"bootm ${loadaddr}\0" \

#define CONFIG_BOOTCOMMAND \
	"if mmc rescan ${mmcdev}; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else run nandboot; " \
			"fi; " \
		"fi; " \
	"else run nandboot; fi"

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */

/* turn on command-line edit/hist/auto */
#define CONFIG_CMDLINE_EDITING
#define CONFIG_COMMAND_HISTORY
#define CONFIG_AUTO_COMPLETE

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

#define CONFIG_SYS_ALT_MEMTEST		1
#define CONFIG_SYS_MEMTEST_START	(0x82000000)		/* memtest */
								/* defaults */
#define CONFIG_SYS_MEMTEST_END		(0x83FFFFFF)		/* 64MB */
#define CONFIG_SYS_MEMTEST_SCRATCH	(0x81000000)	/* dummy address */

#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
							/* load address */
#define CONFIG_SYS_TEXT_BASE		0x80008000

/*
 * OMAP3 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */

/*
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1

/*
 * FLASH and environment organization
 */

/* **** PISMO SUPPORT *** */
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE		NAND_BASE

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP

#define CONFIG_ENV_IS_IN_NAND		1
#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */

#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)
#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
#define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)

#define CONFIG_OMAP3_SPI

/*
 * USB
 *
 * Currently only EHCI is enabled, the MUSB OTG controller
 * is not enabled.
 */

/* USB EHCI */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_OMAP
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	162

#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX

#define CONFIG_USB_ETHER
#define CONFIG_USB_ETHER_RNDIS

/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE

#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"

#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_OMAP3_ID_NAND
#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"

/* NAND boot config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT	64
#define CONFIG_SYS_NAND_PAGE_SIZE	2048
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
/*
 * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
 * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
 */
#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
					 10, 11, 12, 13 }
#define CONFIG_SYS_NAND_ECCSIZE		512
#define CONFIG_SYS_NAND_ECCBYTES	3
#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW

#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000

#define CONFIG_SPL_TEXT_BASE		0x40200800
#define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
					 CONFIG_SPL_TEXT_BASE)

/*
 * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
 * older x-loader implementations. And move the BSS area so that it
 * doesn't overlap with TEXT_BASE.
 */
#define CONFIG_SYS_TEXT_BASE		0x80008000
#define CONFIG_SPL_BSS_START_ADDR	0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */

#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000

#endif /* __CONFIG_H */
Commit	Line	Data
550e3756 TU	1	/*
	2	* Configuration settings for the TechNexion TAO-3530 SOM
	3	* equipped on Thunder baseboard.
	4	*
	5	* Edward Lin <linuxfae@technexion.com>
	6	* Tapani Utriainen <linuxfae@technexion.com>
	7	*
a9f52490 SR	8	* Copyright (C) 2013 Stefan Roese <sr@denx.de>
a9f52490 SR	9	*
550e3756 TU	10	* SPDX-License-Identifier: GPL-2.0+
	11	*/
	12
	13	#ifndef __CONFIG_H
	14	#define __CONFIG_H
	15
	16	/*
	17	* High Level Configuration Options
	18	*/
550e3756	19	#define CONFIG_OMAP /* in a TI OMAP core */
550e3756 TU	20
550e3756 TU	21	#define CONFIG_OMAP_GPIO
550e3756	22
550e3756 TU	23	#define CONFIG_SDRC /* Has an SDRC controller */
	24
	25	#include <asm/arch/cpu.h> /* get chip and board defs */
987ec585	26	#include <asm/arch/omap.h>
550e3756	27
550e3756 TU	28	/* Clock Defines */
	29	#define V_OSCK 26000000 /* Clock output from T2 */
	30	#define V_SCLK (V_OSCK >> 1)
	31
	32	#define CONFIG_MISC_INIT_R
	33
550e3756 TU	34	#define CONFIG_CMDLINE_TAG
	35	#define CONFIG_SETUP_MEMORY_TAGS
	36	#define CONFIG_INITRD_TAG
	37	#define CONFIG_REVISION_TAG
	38
	39	/*
	40	* Size of malloc() pool
	41	*/
	42	#define CONFIG_SYS_MALLOC_LEN (4 << 20)
	43	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
	44
	45	/*
	46	* Hardware drivers
	47	*/
	48
	49	/*
	50	* NS16550 Configuration
	51	*/
	52	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	53
550e3756 TU	54	#define CONFIG_SYS_NS16550_SERIAL
	55	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	56	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
	57
	58	/*
	59	* select serial console configuration
	60	*/
	61	#define CONFIG_CONS_INDEX 3
	62	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	63
	64	/* allow to overwrite serial and ethaddr */
	65	#define CONFIG_ENV_OVERWRITE
550e3756	66
36481ded SR	67	/* GPIO banks */
	68	#define CONFIG_OMAP3_GPIO_2 /* GPIO32 ..63 is in GPIO bank 2 */
	69	#define CONFIG_OMAP3_GPIO_3 /* GPIO64 ..95 is in GPIO bank 3 */
	70	#define CONFIG_OMAP3_GPIO_4 /* GPIO96 ..127 is in GPIO bank 4 */
	71	#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
	72	#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
	73
550e3756	74	/* commands to include */
550e3756 TU	75	#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
	76	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	77	#define MTDIDS_DEFAULT "nand0=nand"
	78	#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
	79	"1920k(u-boot),128k(u-boot-env),"\
	80	"4m(kernel),-(fs)"
	81
550e3756	82	#define CONFIG_CMD_NAND /* NAND support */
550e3756	83
550e3756 TU	84	#define CONFIG_SYS_I2C
	85	#define CONFIG_SYS_I2C_OMAP34XX
	86	#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
	87	#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
	88	#define CONFIG_I2C_MULTI_BUS
	89
	90	/*
	91	* TWL4030
	92	*/
	93	#define CONFIG_TWL4030_POWER
	94	#define CONFIG_TWL4030_LED
	95
	96	/*
	97	* Board NAND Info.
	98	*/
550e3756 TU	99	#define CONFIG_NAND_OMAP_GPMC
	100	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	101	/* to access nand */
	102	#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
	103	/* to access nand at */
	104	/* CS0 */
550e3756 TU	105
	106	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
	107	/* devices */
55f1b39f	108	#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
550e3756	109	/* Environment information */
550e3756 TU	110
	111	#define CONFIG_EXTRA_ENV_SETTINGS \
	112	"loadaddr=0x82000000\0" \
	113	"console=ttyO2,115200n8\0" \
	114	"mpurate=600\0" \
	115	"dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \
	116	"tv_mode=omapfb.mode=tv:ntsc\0" \
	117	"video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
	118	"lcd_mode=omapfb.mode=lcd:800x480@60 \0" \
	119	"extra_options= \0" \
550e3756 TU	120	"mmcdev=0\0" \
	121	"mmcroot=/dev/mmcblk0p2 rw\0" \
	122	"mmcrootfstype=ext3 rootwait\0" \
	123	"nandroot=ubi0:rootfs ubi.mtd=4\0" \
	124	"nandrootfstype=ubifs\0" \
	125	"mmcargs=setenv bootargs console=${console} " \
550e3756 TU	126	"mpurate=${mpurate} " \
	127	"${video_mode} " \
	128	"root=${mmcroot} " \
	129	"rootfstype=${mmcrootfstype} " \
	130	"${extra_options}\0" \
	131	"nandargs=setenv bootargs console=${console} " \
550e3756 TU	132	"mpurate=${mpurate} " \
	133	"${video_mode} " \
	134	"${network_setting} " \
	135	"root=${nandroot} " \
	136	"rootfstype=${nandrootfstype} "\
	137	"${extra_options}\0" \
	138	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	139	"bootscript=echo Running bootscript from mmc ...; " \
	140	"source ${loadaddr}\0" \
	141	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	142	"mmcboot=echo Booting from mmc ...; " \
	143	"run mmcargs; " \
	144	"bootm ${loadaddr}\0" \
	145	"nandboot=echo Booting from nand ...; " \
	146	"run nandargs; " \
	147	"nand read ${loadaddr} 280000 400000; " \
	148	"bootm ${loadaddr}\0" \
	149
	150	#define CONFIG_BOOTCOMMAND \
	151	"if mmc rescan ${mmcdev}; then " \
	152	"if run loadbootscript; then " \
	153	"run bootscript; " \
	154	"else " \
	155	"if run loaduimage; then " \
	156	"run mmcboot; " \
	157	"else run nandboot; " \
	158	"fi; " \
	159	"fi; " \
	160	"else run nandboot; fi"
	161
	162	/*
	163	* Miscellaneous configurable options
	164	*/
	165	#define CONFIG_SYS_LONGHELP /* undef to save memory */
550e3756 TU	166	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	167
	168	/* turn on command-line edit/hist/auto */
	169	#define CONFIG_CMDLINE_EDITING
	170	#define CONFIG_COMMAND_HISTORY
	171	#define CONFIG_AUTO_COMPLETE
	172
	173	/* Print Buffer Size */
	174	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	175	sizeof(CONFIG_SYS_PROMPT) + 16)
	176	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	177	/* Boot Argument Buffer Size */
	178	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	179
	180	#define CONFIG_SYS_ALT_MEMTEST 1
	181	#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */
	182	/* defaults */
	183	#define CONFIG_SYS_MEMTEST_END (0x83FFFFFF) /* 64MB */
	184	#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */
	185
	186	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
	187	/* load address */
	188	#define CONFIG_SYS_TEXT_BASE 0x80008000
	189
	190	/*
	191	* OMAP3 has 12 GP timers, they can be driven by the system clock
	192	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	193	* This rate is divided by a local divisor.
	194	*/
	195	#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
	196	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
	197
	198	/*
	199	* Stack sizes
	200	*
	201	* The stack sizes are set up in start.S using the settings below
	202	*/
	203	#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
	204
	205	/*
	206	* Physical Memory Map
	207	*/
	208	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
	209	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
	210	#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
	211	#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
	212
	213	/*
	214	* FLASH and environment organization
	215	*/
	216
	217	/* ** PISMO SUPPORT * */
550e3756	218	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
222a3113	219	#define CONFIG_SYS_FLASH_BASE NAND_BASE
550e3756 TU	220
	221	/* Monitor at start of flash */
	222	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	223	#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
	224
	225	#define CONFIG_ENV_IS_IN_NAND 1
	226	#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
	227	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
	228
	229	#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10)
	230	#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
	231	#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
	232
	233	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	234	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	235	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	236	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	237	CONFIG_SYS_INIT_RAM_SIZE - \
	238	GENERATED_GBL_DATA_SIZE)
	239
	240	#define CONFIG_OMAP3_SPI
	241
	242	/*
	243	* USB
	244	*
	245	* Currently only EHCI is enabled, the MUSB OTG controller
	246	* is not enabled.
	247	*/
	248
	249	/* USB EHCI */
550e3756 TU	250	#define CONFIG_USB_EHCI
	251	#define CONFIG_USB_EHCI_OMAP
	252	#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162
	253
	254	#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
	255	#define CONFIG_USB_HOST_ETHER
	256	#define CONFIG_USB_ETHER_SMSC95XX
	257
	258	#define CONFIG_USB_ETHER
	259	#define CONFIG_USB_ETHER_RNDIS
550e3756	260
a9f52490	261	/* Defines for SPL */
a9f52490 SR	262	#define CONFIG_SPL_FRAMEWORK
	263	#define CONFIG_SPL_NAND_SIMPLE
	264
e2ccdf89	265	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
205b4f33	266	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
a9f52490 SR	267
a9f52490 SR	268	#define CONFIG_SPL_BOARD_INIT
a9f52490 SR	269	#define CONFIG_SPL_NAND_BASE
	270	#define CONFIG_SPL_NAND_DRIVERS
	271	#define CONFIG_SPL_NAND_ECC
a9f52490	272	#define CONFIG_SPL_OMAP3_ID_NAND
983e3700	273	#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
a9f52490 SR	274
	275	/* NAND boot config */
	276	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	277	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	278	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	279	#define CONFIG_SYS_NAND_OOBSIZE 64
	280	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
	281	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	282	/*
	283	* Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
	284	* SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
	285	*/
	286	#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
	287	10, 11, 12, 13 }
	288	#define CONFIG_SYS_NAND_ECCSIZE 512
	289	#define CONFIG_SYS_NAND_ECCBYTES 3
	290	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
	291
	292	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	293	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	294
	295	#define CONFIG_SPL_TEXT_BASE 0x40200800
fa2f81b0 TR	296	#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
fa2f81b0 TR	297	CONFIG_SPL_TEXT_BASE)
a9f52490 SR	298
	299	/*
	300	* Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
	301	* older x-loader implementations. And move the BSS area so that it
	302	* doesn't overlap with TEXT_BASE.
	303	*/
	304	#define CONFIG_SYS_TEXT_BASE 0x80008000
	305	#define CONFIG_SPL_BSS_START_ADDR 0x80100000
	306	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
	307
	308	#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
	309	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
	310
550e3756	311	#endif /* __CONFIG_H */