imx6: icorem6_rqs: Add eMMC boot support

[people/ms/u-boot.git] / board / engicam / icorem6_rqs / icorem6_rqs.c

diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
index e3c520fedf3629751be892546f6a37156dbbc6ce..175bda5860562a14f12b99619b7f2bf26d575fe5 100644 (file)
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -77,8 +77,22 @@ static iomux_v3_cfg_t const usdhc3_pads[] = {
        IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 };
 
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
+static iomux_v3_cfg_t const usdhc4_pads[] = {
+       IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+       IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+
+struct fsl_esdhc_cfg usdhc_cfg[2] = {
        {USDHC3_BASE_ADDR, 1, 4},
+       {USDHC4_BASE_ADDR, 1, 8},
 };
 
 int board_mmc_getcd(struct mmc *mmc)
@@ -88,6 +102,7 @@ int board_mmc_getcd(struct mmc *mmc)
 
        switch (cfg->esdhc_base) {
        case USDHC3_BASE_ADDR:
+       case USDHC4_BASE_ADDR:
                ret = 1;
                break;
        }
@@ -102,7 +117,8 @@ int board_mmc_init(bd_t *bis)
        /*
        * According to the board_mmc_init() the following map is done:
        * (U-boot device node)    (Physical Port)
-       * mmc0                          USDHC3
+       * mmc0                  USDHC3
+       * mmc1                  USDHC4
        */
        for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
                switch (i) {
@@ -110,6 +126,10 @@ int board_mmc_init(bd_t *bis)
                        SETUP_IOMUX_PADS(usdhc3_pads);
                        usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
                        break;
+               case 1:
+                       SETUP_IOMUX_PADS(usdhc4_pads);
+                       usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+                       break;
                default:
                        printf("Warning - USDHC%d controller not supporting\n",
                               i + 1);