powerpc, 8xx: remove support for 8xx

[people/ms/u-boot.git] / board / tqc / tqm8xx / load_sernum_ethaddr.c

diff --git a/board/tqc/tqm8xx/load_sernum_ethaddr.c b/board/tqc/tqm8xx/load_sernum_ethaddr.c
deleted file mode 100644 (file)
index 0070da1..0000000
--- a/board/tqc/tqm8xx/load_sernum_ethaddr.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/*-----------------------------------------------------------------------
- * Process Hardware Information Block:
- *
- * If we boot on a system fresh from factory, check if the Hardware
- * Information Block exists and save the information it contains.
- *
- * The TQM8xxL / TQM82xx Hardware Information Block is defined as
- * follows:
- * - located in first flash bank
- * - starts at offset 0x0003FFC0
- * - size 0x00000040
- *
- * Internal structure:
- * - sequence of ASCII character strings
- * - fields separated by a single space character (0x20)
- * - last field terminated by NUL character (0x00)
- * - remaining space filled with NUL characters (0x00)
- *
- * Fields in Hardware Information Block:
- * 1) Module Type
- * 2) Serial Number
- * 3) First MAC Address
- * 4) Number of additional MAC addresses
- */
-
-void load_sernum_ethaddr (void)
-{
-       unsigned char *hwi;
-       unsigned char  serial [CONFIG_SYS_HWINFO_SIZE];
-       unsigned char  ethaddr[CONFIG_SYS_HWINFO_SIZE];
-       unsigned short ih, is, ie, part;
-
-       hwi = (unsigned char *)(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_HWINFO_OFFSET);
-       ih = is = ie = 0;
-
-       if (*((unsigned long *)hwi) != (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
-               return;
-       }
-
-       part = 1;
-
-       /* copy serial # / MAC address */
-       while ((hwi[ih] != '\0') && (ih < CONFIG_SYS_HWINFO_SIZE)) {
-               if (hwi[ih] < ' ' || hwi[ih] > '~') { /* ASCII strings! */
-                       return;
-               }
-               switch (part) {
-               default:                /* Copy serial # */
-                       if (hwi[ih] == ' ') {
-                               ++part;
-                       }
-                       serial[is++] = hwi[ih];
-                       break;
-               case 3:                 /* Copy MAC address */
-                       if (hwi[ih] == ' ') {
-                               ++part;
-                               break;
-                       }
-                       ethaddr[ie++] = hwi[ih];
-                       if ((ie % 3) == 2)
-                               ethaddr[ie++] = ':';
-                       break;
-               }
-               ++ih;
-       }
-       serial[is]  = '\0';
-       if (ie && ethaddr[ie-1] == ':')
-               --ie;
-       ethaddr[ie] = '\0';
-
-       /* set serial# and ethaddr if not yet defined */
-       if (getenv("serial#") == NULL) {
-               setenv ((char *)"serial#", (char *)serial);
-       }
-
-       if (getenv("ethaddr") == NULL) {
-               setenv ((char *)"ethaddr", (char *)ethaddr);
-       }
-}