#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
-#include <asm/arch/cru_rk3288.h>
-#include <asm/arch/grf_rk3288.h>
#include <asm/arch/edp_rk3288.h>
#include <asm/arch/vop_rk3288.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
-#include <dt-bindings/clock/rk3288-cru.h>
#include <power/regulator.h>
+#include "rk_vop.h"
DECLARE_GLOBAL_DATA_PTR;
-struct rk_vop_priv {
- struct rk3288_vop *regs;
- struct rk3288_grf *grf;
+enum vop_pol {
+ HSYNC_POSITIVE = 0,
+ VSYNC_POSITIVE = 1,
+ DEN_NEGATIVE = 2,
+ DCLK_INVERT = 3
};
-void rkvop_enable(struct rk3288_vop *regs, ulong fbbase,
- int fb_bits_per_pixel, const struct display_timing *edid)
+static void rkvop_enable(struct rk3288_vop *regs, ulong fbbase,
+ int fb_bits_per_pixel,
+ const struct display_timing *edid)
{
u32 lb_mode;
u32 rgb_mode;
writel(0x01, ®s->reg_cfg_done); /* enable reg config */
}
-void rkvop_mode_set(struct rk3288_vop *regs,
- const struct display_timing *edid, enum vop_modes mode)
+static void rkvop_set_pin_polarity(struct udevice *dev,
+ enum vop_modes mode, u32 polarity)
{
- u32 hactive = edid->hactive.typ;
- u32 vactive = edid->vactive.typ;
- u32 hsync_len = edid->hsync_len.typ;
- u32 hback_porch = edid->hback_porch.typ;
- u32 vsync_len = edid->vsync_len.typ;
- u32 vback_porch = edid->vback_porch.typ;
- u32 hfront_porch = edid->hfront_porch.typ;
- u32 vfront_porch = edid->vfront_porch.typ;
- uint flags;
- int mode_flags;
+ struct rkvop_driverdata *ops =
+ (struct rkvop_driverdata *)dev_get_driver_data(dev);
+
+ if (ops->set_pin_polarity)
+ ops->set_pin_polarity(dev, mode, polarity);
+}
+
+static void rkvop_enable_output(struct udevice *dev, enum vop_modes mode)
+{
+ struct rk_vop_priv *priv = dev_get_priv(dev);
+ struct rk3288_vop *regs = priv->regs;
switch (mode) {
case VOP_MODE_HDMI:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_HDMI_OUT_EN(1));
break;
+
case VOP_MODE_EDP:
- default:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_EDP_OUT_EN(1));
break;
+
case VOP_MODE_LVDS:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_RGB_OUT_EN(1));
break;
+
case VOP_MODE_MIPI:
clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN,
V_MIPI_OUT_EN(1));
- break;
+ break;
+
+ default:
+ debug("%s: unsupported output mode %x\n", __func__, mode);
}
+}
- if (mode == VOP_MODE_HDMI || mode == VOP_MODE_EDP)
- /* RGBaaa */
- mode_flags = 15;
- else
- /* RGB888 */
- mode_flags = 0;
+static void rkvop_mode_set(struct udevice *dev,
+ const struct display_timing *edid,
+ enum vop_modes mode)
+{
+ struct rk_vop_priv *priv = dev_get_priv(dev);
+ struct rk3288_vop *regs = priv->regs;
+ struct rkvop_driverdata *data =
+ (struct rkvop_driverdata *)dev_get_driver_data(dev);
- flags = V_DSP_OUT_MODE(mode_flags) |
- V_DSP_HSYNC_POL(!!(edid->flags & DISPLAY_FLAGS_HSYNC_HIGH)) |
- V_DSP_VSYNC_POL(!!(edid->flags & DISPLAY_FLAGS_VSYNC_HIGH));
+ u32 hactive = edid->hactive.typ;
+ u32 vactive = edid->vactive.typ;
+ u32 hsync_len = edid->hsync_len.typ;
+ u32 hback_porch = edid->hback_porch.typ;
+ u32 vsync_len = edid->vsync_len.typ;
+ u32 vback_porch = edid->vback_porch.typ;
+ u32 hfront_porch = edid->hfront_porch.typ;
+ u32 vfront_porch = edid->vfront_porch.typ;
+ int mode_flags;
+ u32 pin_polarity;
+
+ pin_polarity = BIT(DCLK_INVERT);
+ if (edid->flags & DISPLAY_FLAGS_HSYNC_HIGH)
+ pin_polarity |= BIT(HSYNC_POSITIVE);
+ if (edid->flags & DISPLAY_FLAGS_VSYNC_HIGH)
+ pin_polarity |= BIT(VSYNC_POSITIVE);
+
+ rkvop_set_pin_polarity(dev, mode, pin_polarity);
+ rkvop_enable_output(dev, mode);
- clrsetbits_le32(®s->dsp_ctrl0,
- M_DSP_OUT_MODE | M_DSP_VSYNC_POL | M_DSP_HSYNC_POL,
- flags);
+ mode_flags = 0; /* RGB888 */
+ if ((data->features & VOP_FEATURE_OUTPUT_10BIT) &&
+ (mode == VOP_MODE_HDMI || mode == VOP_MODE_EDP))
+ mode_flags = 15; /* RGBaaa */
+
+ clrsetbits_le32(®s->dsp_ctrl0, M_DSP_OUT_MODE,
+ V_DSP_OUT_MODE(mode_flags));
writel(V_HSYNC(hsync_len) |
V_HORPRD(hsync_len + hback_porch + hactive + hfront_porch),
* node within the VOP's 'port' list.
* @return 0 if OK, -ve if something went wrong
*/
-int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node)
+static int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node)
{
struct video_priv *uc_priv = dev_get_uclass_priv(dev);
const void *blob = gd->fdt_blob;
/* Set bitwidth for vop display according to vop mode */
switch (vop_id) {
case VOP_MODE_EDP:
- case VOP_MODE_HDMI:
case VOP_MODE_LVDS:
l2bpp = VIDEO_BPP16;
break;
+ case VOP_MODE_HDMI:
case VOP_MODE_MIPI:
l2bpp = VIDEO_BPP32;
break;
default:
l2bpp = VIDEO_BPP16;
}
- rkvop_mode_set(regs, &timing, vop_id);
+ rkvop_mode_set(dev, &timing, vop_id);
rkvop_enable(regs, fbbase, 1 << l2bpp, &timing);
ret = display_enable(disp, 1 << l2bpp, &timing);
return 0;
}
-static int rk_vop_probe(struct udevice *dev)
+void rk_vop_probe_regulators(struct udevice *dev,
+ const char * const *names, int cnt)
+{
+ int i, ret;
+ const char *name;
+ struct udevice *reg;
+
+ for (i = 0; i < cnt; ++i) {
+ name = names[i];
+ debug("%s: probing regulator '%s'\n", dev->name, name);
+
+ ret = regulator_autoset_by_name(name, ®);
+ if (!ret)
+ ret = regulator_set_enable(reg, true);
+ }
+}
+
+int rk_vop_probe(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
const void *blob = gd->fdt_blob;
struct rk_vop_priv *priv = dev_get_priv(dev);
- struct udevice *reg;
- int ret, port, node;
+ int ret = 0;
+ int port, node;
/* Before relocation we don't need to do anything */
if (!(gd->flags & GD_FLG_RELOC))
return 0;
- priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
priv->regs = (struct rk3288_vop *)devfdt_get_addr(dev);
- /* lcdc(vop) iodomain select 1.8V */
- rk_setreg(&priv->grf->io_vsel, 1 << 0);
-
- /*
- * Try some common regulators. We should really get these from the
- * device tree somehow.
- */
- ret = regulator_autoset_by_name("vcc18_lcd", ®);
- if (ret)
- debug("%s: Cannot autoset regulator vcc18_lcd\n", __func__);
- ret = regulator_autoset_by_name("VCC18_LCD", ®);
- if (ret)
- debug("%s: Cannot autoset regulator VCC18_LCD\n", __func__);
- ret = regulator_autoset_by_name("vdd10_lcd_pwren_h", ®);
- if (ret) {
- debug("%s: Cannot autoset regulator vdd10_lcd_pwren_h\n",
- __func__);
- }
- ret = regulator_autoset_by_name("vdd10_lcd", ®);
- if (ret) {
- debug("%s: Cannot autoset regulator vdd10_lcd\n",
- __func__);
- }
- ret = regulator_autoset_by_name("VDD10_LCD", ®);
- if (ret) {
- debug("%s: Cannot autoset regulator VDD10_LCD\n",
- __func__);
- }
- ret = regulator_autoset_by_name("vcc33_lcd", ®);
- if (ret)
- debug("%s: Cannot autoset regulator vcc33_lcd\n", __func__);
-
/*
* Try all the ports until we find one that works. In practice this
* tries EDP first if available, then HDMI.
return ret;
}
-static int rk_vop_bind(struct udevice *dev)
+int rk_vop_bind(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
return 0;
}
-
-static const struct video_ops rk_vop_ops = {
-};
-
-static const struct udevice_id rk_vop_ids[] = {
- { .compatible = "rockchip,rk3399-vop-big" },
- { .compatible = "rockchip,rk3399-vop-lit" },
- { .compatible = "rockchip,rk3288-vop" },
- { }
-};
-
-U_BOOT_DRIVER(rk_vop) = {
- .name = "rk_vop",
- .id = UCLASS_VIDEO,
- .of_match = rk_vop_ids,
- .ops = &rk_vop_ops,
- .bind = rk_vop_bind,
- .probe = rk_vop_probe,
- .priv_auto_alloc_size = sizeof(struct rk_vop_priv),
-};
projects / people / ms / u-boot.git / blobdiff