common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option

[people/ms/u-boot.git] / include / configs / P1022DS.h

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 0f5915daea2b3f999422b7491c59afa71e496660..bdf0323bfc764959be60a8c7518f077d9c520b34 100644 (file)
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -11,7 +11,6 @@
 
 #include "../board/freescale/common/ics307_clk.h"
 
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
 
 #ifdef CONFIG_36BIT
@@ -135,9 +134,9 @@
 
 #define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
-#define CONFIG_PCIE1                   /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2                   /* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3                   /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1                   /* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2                   /* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3                   /* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET          /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
@@ -173,7 +172,6 @@
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
-
 /* DDR Setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
@@ -218,7 +216,6 @@
 #define        CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 #define CONFIG_SYS_DDR_WRLVL_CONTROL   0x8675f608
 
-
 /*
  * Memory map
  *
@@ -394,7 +391,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -408,9 +404,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 /* Video */
 
 #ifdef CONFIG_FSL_DIU_FB
@@ -445,17 +438,6 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #endif
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -479,13 +461,9 @@
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
 
 #define CONFIG_HARD_SPI
-#define CONFIG_FSL_ESPI
 
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED                10000000
 #define CONFIG_SF_DEFAULT_MODE         0
 
@@ -555,7 +533,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_E1000                   /* Define e1000 pci Ethernet card */
 #endif
 
 /* SATA */
@@ -575,20 +552,16 @@
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -680,14 +653,8 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -702,11 +669,9 @@
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
 #endif
 #endif
 
@@ -750,7 +715,6 @@
 
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE        115200