mmc: complete unfinished move of CONFIG_MMC

[people/ms/u-boot.git] / include / configs / T208xRDB.h

diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 7879eb32485c56274afd8d12df8897b396f6e35a..ee27a8fb34122c67172da2985a375f4a938c60ad 100644 (file)
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -11,10 +11,8 @@
 #ifndef __T2080RDB_H
 #define __T2080RDB_H
 
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_T2080RDB
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
-#define CONFIG_MMC
 #define CONFIG_USB_EHCI
 #define CONFIG_FSL_SATA_V2
 
@@ -35,16 +33,13 @@
 #define CONFIG_SYS_NUM_CPC     CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC         /* Enable IFC Support */
 #define CONFIG_FSL_CAAM                /* Enable SEC/CAAM */
-#define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg
 
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
@@ -64,6 +59,7 @@
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT  "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_nand_rcw.cfg
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
@@ -78,6 +74,7 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_spi_rcw.cfg
 #define CONFIG_SPL_SPI_BOOT
 #endif
 
@@ -92,6 +89,7 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_sd_rcw.cfg
 #define CONFIG_SPL_MMC_BOOT
 #endif
 
@@ -487,7 +485,6 @@ unsigned long get_board_ddr_clk(void);
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 #define CONFIG_PCIE2           /* PCIE controller 2 */
 #define CONFIG_PCIE3           /* PCIE controller 3 */
@@ -536,7 +533,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata LSZ ADD */
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
 #endif