Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT

[people/ms/u-boot.git] / include / configs / cm_t35.h

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index bdbbfdd5de4d26823c90fd4b5b2795b3f17f4220..dc1b6b57215302775326eb0be2f02c2cf2d9b3a0 100644 (file)
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -24,8 +24,6 @@
  */
 #define CONFIG_CM_T3X  /* working with CM-T35 and CM-T3730 */
 
-#define CONFIG_SDRC    /* The chip has SDRC controller */
-
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap.h>
 
@@ -85,15 +83,10 @@
 /* commands to include */
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT         "nand0=nand"
-#define MTDPARTS_DEFAULT       "mtdparts=nand:512k(x-loader),"\
-                               "1920k(u-boot),256k(u-boot-env),"\
-                               "4m(kernel),-(fs)"
 
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
-#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_I2C_EEPROM_BUS      0
@@ -107,7 +100,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
@@ -176,13 +168,6 @@
 #define CONFIG_TIMESTAMP
 #define CONFIG_SYS_AUTOLOAD            "no"
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE            (CONFIG_SYS_CBSIZE)
 
 #define CONFIG_SYS_MEMTEST_START       (OMAP34XX_SDRC_CS0)     /* memtest */
                                                                /* works on */
@@ -215,17 +200,8 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
-#define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
-#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
-
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CM_T3X_SMC911X_BASE    0x2C000000
-#define SB_T35_SMC911X_BASE    (CM_T3X_SMC911X_BASE + (16 << 20))
-#define CONFIG_SMC911X_BASE    CM_T3X_SMC911X_BASE
-#endif /* (CONFIG_CMD_NET) */
+#define CONFIG_ENV_OFFSET              0x260000
+#define CONFIG_ENV_ADDR                        0x260000
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
@@ -249,11 +225,8 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
 
-#define CONFIG_OMAP3_SPI
-
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
@@ -261,8 +234,6 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE