Kconfig: Migrate CONFIG_BAUDRATE

[people/ms/u-boot.git] / include / configs / flea3.h

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index bf02829cde58f856efcf01647989fe3cdc9f603f..0ab33953ac6398d8e46f3e18abc43a0812b61b44 100644 (file)
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -19,14 +19,6 @@
 #define CONFIG_MX35
 
 #define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_CACHELINE_SIZE      32
-
-#define CONFIG_DISPLAY_CPUINFO
-
-/* Only in case the value is not present in mach-types.h */
-#ifndef MACH_TYPE_FLEA3
-#define MACH_TYPE_FLEA3                3668
-#endif
 
 #define CONFIG_MACH_TYPE               MACH_TYPE_FLEA3
 
@@ -34,7 +26,6 @@
 #define CONFIG_SYS_TEXT_BASE   0xA0000000
 
 /* This is required to setup the ESDC controller */
-#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
 #define CONFIG_REVISION_TAG
@@ -51,6 +42,9 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM         2 /* I2C3 */
 #define CONFIG_SYS_MXC_I2C3_SLAVE      0xfe
 #define CONFIG_MXC_SPI
@@ -65,34 +59,21 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_BAUDRATE                115200
 
 /*
  * Command definition
  */
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_DNS
 
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_CACHE
 
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_NET_RETRY_COUNT 100
 
-#define CONFIG_BOOTDELAY       3
 
 #define CONFIG_LOADADDR                0x80800000      /* loadaddr env var */
 
-
 /*
  * Ethernet on SOC (FEC)
  */
@@ -110,22 +91,17 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_SYS_PROMPT      "flea3 U-Boot > "
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
 
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE      512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
+#define CONFIG_SYS_MAXARGS     32      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0       /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x10000
 
-#undef CONFIG_SYS_CLKS_IN_HZ   /* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 /*
@@ -243,8 +219,8 @@
        "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
        "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
-       "update=protect off ${uboot_addr} +40000;"                      \
-               "erase ${uboot_addr} +40000;"                           \
+       "update=protect off ${uboot_addr} +80000;"                      \
+               "erase ${uboot_addr} +80000;"                           \
                "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
        "upd=if run load;then echo Updating u-boot;if run update;"      \
                "then echo U-Boot updated;"                             \