Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT

[people/ms/u-boot.git] / include / configs / m28evk.h

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 29c60b75a5a5b900e9d483ba58a47d70e71d8980..ad6995d1a033abd5a808bc70bace7c35ea3f13d2 100644 (file)
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -9,43 +9,10 @@
 
 /* System configurations */
 #define CONFIG_MX28                            /* i.MX28 SoC */
-#define MACH_TYPE_M28EVK       3613
 #define CONFIG_MACH_TYPE       MACH_TYPE_M28EVK
 
-#define CONFIG_FIT
-
 #define CONFIG_TIMESTAMP               /* Print image info with timestamp */
 
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define        CONFIG_VIDEO
-
-
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
 #define PHYS_SDRAM_1                   0x40000000      /* Base address */
@@ -54,7 +21,6 @@
 
 /* Environment */
 #define CONFIG_ENV_SIZE                        (16 * 1024)
-#define CONFIG_ENV_IS_IN_NAND
 
 /* Environment is in NAND */
 #if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
@@ -65,24 +31,8 @@
 #define CONFIG_ENV_OFFSET_REDUND       \
                (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT                 "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT                       \
-       "mtdparts=gpmi-nand:"                   \
-               "3m(u-boot),"                   \
-               "512k(env1),"                   \
-               "512k(env2),"                   \
-               "14m(boot),"                    \
-               "238m(data),"                   \
-               "-@4096k(UBI)"
-#else
-#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 /* FEC Ethernet on SoC */
@@ -90,12 +40,6 @@
 #define CONFIG_FEC_MXC
 #endif
 
-/* EEPROM */
-#ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#endif
-
 /* RTC */
 #ifdef CONFIG_CMD_DATE
 /* Use the internal RTC in the MXS chip */
@@ -114,18 +58,15 @@
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-#define CONFIG_USB_STORAGE
 #endif
 
 /* SPI */
 #ifdef CONFIG_CMD_SPI
 #define CONFIG_DEFAULT_SPI_BUS         2
-#define CONFIG_DEFAULT_SPI_CS          0
 #define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_0
 
 /* SPI FLASH */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SF_DEFAULT_BUS          2
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED                40000000
@@ -143,7 +84,6 @@
 #ifdef CONFIG_VIDEO
 #define        CONFIG_VIDEO_LOGO
 #define        CONFIG_SPLASH_SCREEN
-#define        CONFIG_CMD_BMP
 #define        CONFIG_BMP_16BPP
 #define        CONFIG_VIDEO_BMP_RLE8
 #define        CONFIG_VIDEO_BMP_GZIP
@@ -151,9 +91,7 @@
 #endif
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTFILE                "fitImage"
-#define CONFIG_BOOTARGS                "console=ttyAMA0,115200n8 "
 #define CONFIG_BOOTCOMMAND     "run mmc_mmc"
 #define CONFIG_LOADADDR                0x42000000
 #define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR