Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / woodburn_common.h

diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index de6b1838d7654e7311626463b307dc88f41ecd43..af06548bee22a18cbeb00dd525689d88329be6e8 100644 (file)
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -20,13 +20,6 @@
 
 #define CONFIG_SYS_DCACHE_OFF
 
-#define CONFIG_DISPLAY_CPUINFO
-
-/* Only in case the value is not present in mach-types.h */
-#ifndef MACH_TYPE_FLEA3
-#define MACH_TYPE_FLEA3                3668
-#endif
-
 #define CONFIG_MACH_TYPE               MACH_TYPE_FLEA3
 
 /* This is required to setup the ESDC controller */
@@ -50,8 +43,6 @@
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM         0
-#define CONFIG_MXC_SPI
-#define CONFIG_MXC_GPIO
 
 /* PMIC Controller */
 #define CONFIG_POWER
@@ -62,8 +53,6 @@
 #define CONFIG_RTC_MC13XXX
 
 /* mmc driver */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
@@ -77,22 +66,10 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_BAUDRATE                115200
 
 /*
  * Command definition
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_DNS
-
-#define CONFIG_CMD_NAND
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-
-#define CONFIG_MXC_GPIO
 
 #define CONFIG_NET_RETRY_COUNT 100
 
@@ -104,8 +81,6 @@
  */
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE   FEC_BASE_ADDR
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 #define CONFIG_FEC_MXC_PHYADDR 0x1
 
 #define CONFIG_MII
@@ -116,28 +91,12 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0       /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x10000
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
 /*
  * Physical Memory Map
  */
@@ -156,18 +115,9 @@
 /*
  * MTD Command for mtdparts
  */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_FLASH_CFI_MTD
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT         "nand0=mxc_nand,nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT       "mtdparts=mxc_nand:50m(root1)," \
-                               "32m(rootfb)," \
-                               "64m(pcache)," \
-                               "64m(app1)," \
-                               "10m(app2),-(spool);" \
-                               "physmap-flash.0:512k(u-boot),64k(env1)," \
-                               "64k(env2),3776k(kernel1),3776k(kernel2)"
 
 /*
  * FLASH and environment organization
@@ -189,8 +139,6 @@
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + \
                                CONFIG_SYS_MONITOR_LEN)
 
-#define CONFIG_ENV_IS_IN_FLASH
-
 /*
  * CFI FLASH driver setup
  */
@@ -204,7 +152,6 @@
 /*
  * NAND FLASH driver setup
  */
-#define CONFIG_NAND_MXC
 #define CONFIG_NAND_MXC_V1_1
 #define CONFIG_MXC_NAND_REGS_BASE      (NFC_BASE_ADDR)
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
@@ -212,10 +159,6 @@
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
-#if 0
-#define CONFIG_MTD_DEBUG
-#define CONFIG_MTD_DEBUG_VERBOSE       7
-#endif
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /*