Erstmal ein Commit:

[people/pmueller/ipfire-2.x.git] / src / ibod / ibod.cf

diff --git a/src/ibod/ibod.cf b/src/ibod/ibod.cf
deleted file mode 100644 (file)
index 8a49598..0000000
--- a/src/ibod/ibod.cf
+++ /dev/null
@@ -1,58 +0,0 @@
-# $Id: ibod.cf,v 1.1.1.1 2001/11/27 08:08:03 riddles Exp $
-# $Symbol$
-#
-#
-#
-# Configuration file for ibod (ISDN Bandwidth On Demand)
-#
-# This file contain the initial configuration values for the
-# ibod daemon. Each line contain a keyword and a value.
-#
-# Boolean attributes are set with 0 or 1 which corresponds to
-# false and true respectively. A boolean attribute not specified
-# at all is allways false.
-#
-# Lines beginning with # are treated as comments and are ignored.
-#
-# IMPORTANT RULES!
-#
-#      1. Keywords are case sensitive.
-#      2. Kewords must begin at first column.
-#      3. Keyword and value must be separated by exctly one (1)
-#         space ot tab chracter.
-#
-# This file is re-read every time ibod receives SIGHUP (1) signal.
-#
-# DEVICE       <name>  Name of ISDN PPP device.
-#                      Default is ippp0.
-#
-# ENABLE       1|0     Enable/disable bandwidth-on-demand.
-#                      Default is enable (1).
-#
-# INTERVAL     <n>     Specify the sample time interval in ms.
-#                      Default is 500 ms.
-#
-# FILTER       <n>     Defines "filtering factor". A value of 10 means
-#                      that the average bytes/sec value measured over 10
-#                      intervals must pass the limit defined by LIMIT
-#                      to bring up or down the slave link.
-#                      Default is 5.
-#
-# LIMIT                <n>     Transfer rate limit in bytes/sec for bringing
-#                      up or down isdn slave channel.
-#                      Default is 5000.
-#
-# STAYUP       0|1     Enable/disable slave channel stay up function.
-#                      If enabled the 2:nd cannel (slave link) will stay
-#                      up even if the average bytes/sec decrease the value
-#                      defined by LIMIT. In this case the slave link will
-#                      stay up until hangup time is reached.
-#                      (Example: isdnctrl huptimeout ippp1 60)
-#                      If disabled the slave link will be brought down in
-#                      the same way it is brought up.
-#                      Default is 0.
-#
-# STAYUP_TIME  <n>     Defines the minimum time in seconds the 2:nd
-#                      channel will unconditionally stay up after it has
-#                      been brought up. Default value is 30.
-#