[thirdparty/binutils-gdb.git] / ld / scripttempl / elfm9s12z.sc

# Copyright (C) 2014-2021 Free Software Foundation, Inc.
#
# Copying and distribution of this file, with or without modification,
# are permitted in any medium without royalty provided the copyright
# notice and this notice are preserved.
#
# Unusual variables checked by this code:
#	NOP - four byte opcode for no-op (defaults to 0)
#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
#		(e.g., .PARISC.global)
#	OTHER_SECTIONS - at the end
#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
#		executable (e.g., _DYNAMIC_LINK)
#	TEXT_START_SYMBOLS - symbols that appear at the start of the
#		.text section.
#	DATA_START_SYMBOLS - symbols that appear at the start of the
#		.data section.
#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#		.bss section besides __bss_start.
#	EMBEDDED - whether this is for an embedded system.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#
test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test "$LD_FLAG" = "N" && DATA_ADDR=.

CTOR=".ctors ${CONSTRUCTING-0} :
  {
    ${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
    ${CONSTRUCTING+${CTOR_START}}
    KEEP (*(.ctors))

    ${CONSTRUCTING+${CTOR_END}}
    ${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
  } ${RELOCATING+ > ${TEXT_MEMORY}}"

DTOR="  .dtors	${CONSTRUCTING-0} :
  {
    ${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
    KEEP (*(.dtors))
    ${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
  } ${RELOCATING+ > ${TEXT_MEMORY}}"


VECTORS="
  /* If the 'vectors_addr' symbol is defined, it indicates the start address
     of interrupt vectors.

     In general, the vectors address is 0xfffe00.  This can be overriden
     with the '-defsym vectors_addr=0xbfc000' ld option.  If you do this,
     then your startup code should also set the IVBR register accordingly.
  */

  PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xfffe00);
  .vectors DEFINED (vectors_addr) ? vectors_addr : 0xfffe00 :
  {
    KEEP (*(.vectors))
  }"

#
# We provide two emulations: a fixed on that defines some memory banks
# and a configurable one that includes a user provided memory definition.
#
case $GENERIC_BOARD in
  yes|1|YES)
	MEMORY_DEF="
/* Get memory banks definition from some user configuration file.
   This file must be located in some linker directory (search path
   with -L<dir>). See fixed memory banks emulation script.  */
INCLUDE memory.x;
"
	;;
  *)
MEMORY_DEF="
/* Fixed definition of the available memory banks.
   See generic emulation script for a user defined configuration.  */
MEMORY
{
  text  (rx)  : ORIGIN = $[$ROM_TOP - $ROM_SIZE + 1], LENGTH = ${ROM_SIZE} - 4
  data        : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
  eeprom      : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
  rvec        : ORIGIN = 0xFFFFFC,  LENGTH = 4
}

/* Setup the stack on the top of the data memory bank.  */
PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
"
	;;
esac

STARTUP_CODE="
    /* Startup code.  */
    KEEP (*(.install0))	/* Section should setup the stack pointer.  */
    KEEP (*(.install1))	/* Place holder for applications.  */
    KEEP (*(.install2))	/* Optional installation of data sections in RAM.  */
    KEEP (*(.install3))	/* Place holder for applications.  */
    KEEP (*(.install4))	/* Section that calls the main.  */
"

FINISH_CODE="
    /* Finish code.  */
    KEEP (*(.fini0))	/* Beginning of finish code (_exit symbol).  */
    KEEP (*(.fini1))	/* Place holder for applications.  */
    KEEP (*(.fini2))	/* C++ destructors.  */
    KEEP (*(.fini3))	/* Place holder for applications.  */
    KEEP (*(.fini4))	/* Runtime exit.  */
"

PRE_COMPUTE_DATA_SIZE="
/* SCz: this does not work yet... This is supposed to force the loading
   of _map_data.o (from libgcc.a) when the .data section is not empty.
   By doing so, this should bring the code that copies the .data section
   from ROM to RAM at init time.

  ___pre_comp_data_size = SIZEOF(.data);
  __install_data_sections = ___pre_comp_data_size > 0 ?
		__map_data_sections : 0;
*/
"

INSTALL_RELOC="
  .install0 0 : { *(.install0) }
  .install1 0 : { *(.install1) }
  .install2 0 : { *(.install2) }
  .install3 0 : { *(.install3) }
  .install4 0 : { *(.install4) }
"

FINISH_RELOC="
  .fini0 0 : { *(.fini0) }
  .fini1 0 : { *(.fini1) }
  .fini2 0 : { *(.fini2) }
  .fini3 0 : { *(.fini3) }
  .fini4 0 : { *(.fini4) }
"

BSS_DATA_RELOC="
  .data1 0 : { *(.data1) }

  /* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .sdata   0 : { *(.sdata) }
  .sbss    0 : { *(.sbss) }
  .scommon 0 : { *(.scommon) }
"

SOFT_REGS_RELOC="
  .softregs 0 : { *(.softregs) }
"

cat <<EOF
/* Copyright (C) 2014-2021 Free Software Foundation, Inc.

   Copying and distribution of this script, with or without modification,
   are permitted in any medium without royalty provided the copyright
   notice and this notice are preserved.  */

${RELOCATING+/* Linker script for HCS12Z executable (PROM).  */}
${RELOCATING-/* Linker script for HCS12Z object file (ld -r).  */}

OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	      "${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
${RELOCATING+ENTRY(${ENTRY})}

${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${MEMORY_DEF}}

${RELOCATING+PROVIDE (_start = $[$ROM_TOP - $ROM_SIZE + 1]);}
SECTIONS
{
  .hash        ${RELOCATING-0} : { *(.hash)		}
  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
  .gnu.version		${RELOCATING-0} : { *(.gnu.version) }
  .gnu.version_d	${RELOCATING-0} : { *(.gnu.version_d) }
  .gnu.version_r	${RELOCATING-0} : { *(.gnu.version_r) }

  .rel.text    ${RELOCATING-0} :
    {
      *(.rel.text)
      ${RELOCATING+*(.rel.text.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
    }
  .rela.text   ${RELOCATING-0} :
    {
      *(.rela.text)
      ${RELOCATING+*(.rela.text.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
    }
  .rel.data    ${RELOCATING-0} :
    {
      *(.rel.data)
      ${RELOCATING+*(.rel.data.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
    }
  .rela.data   ${RELOCATING-0} :
    {
      *(.rela.data)
      ${RELOCATING+*(.rela.data.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
    }
  .rel.rodata  ${RELOCATING-0} :
    {
      *(.rel.rodata)
      ${RELOCATING+*(.rel.rodata.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
    }
  .rela.rodata ${RELOCATING-0} :
    {
      *(.rela.rodata)
      ${RELOCATING+*(.rela.rodata.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
    }
  .rel.sdata   ${RELOCATING-0} :
    {
      *(.rel.sdata)
      ${RELOCATING+*(.rel.sdata.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
    }
  .rela.sdata   ${RELOCATING-0} :
    {
      *(.rela.sdata)
      ${RELOCATING+*(.rela.sdata.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
    }
  .rel.sbss    ${RELOCATING-0} :
    {
      *(.rel.sbss)
      ${RELOCATING+*(.rel.sbss.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
    }
  .rela.sbss   ${RELOCATING-0} :
    {
      *(.rela.sbss)
      ${RELOCATING+*(.rela.sbss.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
    }
  .rel.bss     ${RELOCATING-0} :
    {
      *(.rel.bss)
      ${RELOCATING+*(.rel.bss.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
    }
  .rela.bss    ${RELOCATING-0} :
    {
      *(.rela.bss)
      ${RELOCATING+*(.rela.bss.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
    }
  .rel.stext		${RELOCATING-0} : { *(.rel.stest) }
  .rela.stext		${RELOCATING-0} : { *(.rela.stest) }
  .rel.etext		${RELOCATING-0} : { *(.rel.etest) }
  .rela.etext		${RELOCATING-0} : { *(.rela.etest) }
  .rel.sdata		${RELOCATING-0} : { *(.rel.sdata) }
  .rela.sdata		${RELOCATING-0} : { *(.rela.sdata) }
  .rel.edata		${RELOCATING-0} : { *(.rel.edata) }
  .rela.edata		${RELOCATING-0} : { *(.rela.edata) }
  .rel.eit_v		${RELOCATING-0} : { *(.rel.eit_v) }
  .rela.eit_v		${RELOCATING-0} : { *(.rela.eit_v) }
  .rel.ebss		${RELOCATING-0} : { *(.rel.ebss) }
  .rela.ebss		${RELOCATING-0} : { *(.rela.ebss) }
  .rel.srodata		${RELOCATING-0} : { *(.rel.srodata) }
  .rela.srodata		${RELOCATING-0} : { *(.rela.srodata) }
  .rel.erodata		${RELOCATING-0} : { *(.rel.erodata) }
  .rela.erodata		${RELOCATING-0} : { *(.rela.erodata) }
  .rel.got		${RELOCATING-0} : { *(.rel.got) }
  .rela.got		${RELOCATING-0} : { *(.rela.got) }
  .rel.ctors		${RELOCATING-0} : { *(.rel.ctors) }
  .rela.ctors		${RELOCATING-0} : { *(.rela.ctors) }
  .rel.dtors		${RELOCATING-0} : { *(.rel.dtors) }
  .rela.dtors		${RELOCATING-0} : { *(.rela.dtors) }
  .rel.init		${RELOCATING-0} : { *(.rel.init) }
  .rela.init		${RELOCATING-0} : { *(.rela.init) }
  .rel.fini		${RELOCATING-0} : { *(.rel.fini) }
  .rela.fini		${RELOCATING-0} : { *(.rela.fini) }
  .rel.plt		${RELOCATING-0} : { *(.rel.plt) }
  .rela.plt		${RELOCATING-0} : { *(.rela.plt) }

  /* Start of text section.  */
  .stext ${RELOCATING-0} :
  {
    *(.stext)
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  .init	${RELOCATING-0} :
  {
    KEEP (*(SORT_NONE(.init)))
  } ${RELOCATING+=${NOP-0}}

  ${RELOCATING-${INSTALL_RELOC}}
  ${RELOCATING-${FINISH_RELOC}}

  .text ${RELOCATING-0}:
  {
    /* Put startup code at beginning so that _start keeps same address.  */
    ${RELOCATING+${STARTUP_CODE}}

    *(.text)
    ${RELOCATING+*(.text.*)}
    /* .gnu.warning sections are handled specially by elf.em.  */
    *(.gnu.warning)
    ${RELOCATING+*(.gnu.linkonce.t.*)}
    ${RELOCATING+*(.tramp)}
    ${RELOCATING+*(.tramp.*)}

    ${RELOCATING+KEEP (*(SORT_NONE(.fini)))}
    ${RELOCATING+${FINISH_CODE}}

    ${RELOCATING+_etext = .;}
    ${RELOCATING+PROVIDE (etext = .);}
    ${RELOCATING+. = ALIGN(2);}
  } ${RELOCATING+ > ${TEXT_MEMORY} =${NOP}}
  .rvec ${RELOCATING-0} :
  {
    ${RELOCATING+LONG(_start);}
  } ${RELOCATING+ > rvec}
  .eh_frame ${RELOCATING-0} :
  {
    KEEP (*(.eh_frame))
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  .gcc_except_table ${RELOCATING-0} :
  {
    *(.gcc_except_table)
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  .rodata  ${RELOCATING-0} :
  {
    *(.rodata)
    ${RELOCATING+*(.rodata.*)}
    ${RELOCATING+*(.gnu.linkonce.r*)}
    ${RELOCATING+. = ALIGN(2);}
  } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}

  .rodata1 ${RELOCATING-0} :
  {
    *(.rodata1)
    ${RELOCATING+. = ALIGN(2);}
  } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}

  /* Constructor and destructor tables are in ROM.  */
  ${RELOCATING+${CTOR}}
  ${RELOCATING+${DTOR}}

  .jcr ${RELOCATING-0} :
  {
    KEEP (*(.jcr))
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  /* Start of the data section image in ROM.  */
  ${RELOCATING+__data_image = .;}
  ${RELOCATING+PROVIDE (__data_image = .);}

  /* All read-only sections that normally go in PROM must be above.
     We construct the DATA image section in PROM at end of all these
     read-only sections.  The data image must be copied at init time.
     Refer to GNU ld, Section 3.6.8.2 Output Section LMA.  */
  .data  ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
  {
    ${RELOCATING+__data_section_start = .;}
    ${RELOCATING+PROVIDE (__data_section_start = .);}

    ${RELOCATING+${DATA_START_SYMBOLS}}
    ${RELOCATING+*(.sdata)}
    *(.data)
    ${RELOCATING+*(.data.*)}
    ${RELOCATING+*(.data1)}
    ${RELOCATING+*(.gnu.linkonce.d.*)}
    ${CONSTRUCTING+CONSTRUCTORS}

    ${RELOCATING+_edata  =  .;}
    ${RELOCATING+PROVIDE (edata = .);}
    ${RELOCATING+. = ALIGN(2);}
  } ${RELOCATING+ > ${DATA_MEMORY} =0xffffffff}

  ${RELOCATING+__data_section_size = SIZEOF(.data);}
  ${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
  ${RELOCATING+__data_image_end = __data_image + __data_section_size;}

  ${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}

  .install ${RELOCATING-0}:
  {
    ${RELOCATING+. = __data_section_size;}
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  /* Relocation for some bss and data sections.  */
  ${RELOCATING-${BSS_DATA_RELOC}}
  ${RELOCATING-${SOFT_REGS_RELOC}}

  .bss ${RELOCATING-0} :
  {
    ${RELOCATING+__bss_start = .;}
    ${RELOCATING+*(.softregs)}
    ${RELOCATING+*(.sbss)}
    ${RELOCATING+*(.common)}
    ${RELOCATING+*(.scommon)}
    ${RELOCATING+*(.dynbss)}
    *(.bss)
    ${RELOCATING+*(.bss.*)}
    ${RELOCATING+*(.gnu.linkonce.b.*)}
    ${RELOCATING+*(COMMON)}
    ${RELOCATING+PROVIDE (_end = .);}
  } ${RELOCATING+ > ${DATA_MEMORY}}
  ${RELOCATING+__bss_size = SIZEOF(.bss);}
  ${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}

  .eeprom ${RELOCATING-0} :
  {
    *(.eeprom)
    ${RELOCATING+*(.eeprom.*)}
  } ${RELOCATING+ > ${EEPROM_MEMORY}}

  ${RELOCATING+${VECTORS}}

  /* Stabs debugging sections.  */
  .stab		 0 : { *(.stab) }
  .stabstr	 0 : { *(.stabstr) }
  .stab.excl	 0 : { *(.stab.excl) }
  .stab.exclstr	 0 : { *(.stab.exclstr) }
  .stab.index	 0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }

  .comment	 0 : { *(.comment) }

  /* Treatment of DWARF debug section must be at end of the linker
     script to avoid problems when there are undefined symbols. It's necessary
     to avoid that the DWARF section is relocated before such undefined
     symbols are found.  */
EOF

. $srcdir/scripttempl/DWARF.sc

cat <<EOF
}
EOF
Commit	Line	Data
250d07de	1	# Copyright (C) 2014-2021 Free Software Foundation, Inc.
7b4ae824 JD	2	#
	3	# Copying and distribution of this file, with or without modification,
	4	# are permitted in any medium without royalty provided the copyright
	5	# notice and this notice are preserved.
	6	#
	7	# Unusual variables checked by this code:
	8	# NOP - four byte opcode for no-op (defaults to 0)
	9	# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
	10	# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
	11	# (e.g., .PARISC.global)
	12	# OTHER_SECTIONS - at the end
	13	# EXECUTABLE_SYMBOLS - symbols that must be defined for an
	14	# executable (e.g., _DYNAMIC_LINK)
	15	# TEXT_START_SYMBOLS - symbols that appear at the start of the
	16	# .text section.
	17	# DATA_START_SYMBOLS - symbols that appear at the start of the
	18	# .data section.
	19	# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
	20	# .bss section besides __bss_start.
	21	# EMBEDDED - whether this is for an embedded system.
	22	#
	23	# When adding sections, do note that the names of some sections are used
	24	# when specifying the start address of the next.
	25	#
	26	test -z "$ENTRY" && ENTRY=_start
	27	test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	28	test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	29	if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
	30	test "$LD_FLAG" = "N" && DATA_ADDR=.
	31
	32	CTOR=".ctors ${CONSTRUCTING-0} :
	33	{
	34	${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
	35	${CONSTRUCTING+${CTOR_START}}
	36	KEEP (*(.ctors))
	37
	38	${CONSTRUCTING+${CTOR_END}}
	39	${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
	40	} ${RELOCATING+ > ${TEXT_MEMORY}}"
	41
	42	DTOR=" .dtors ${CONSTRUCTING-0} :
	43	{
	44	${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
	45	KEEP (*(.dtors))
	46	${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
	47	} ${RELOCATING+ > ${TEXT_MEMORY}}"
	48
	49
	50	VECTORS="
	51	/* If the 'vectors_addr' symbol is defined, it indicates the start address
	52	of interrupt vectors.
	53
	54	In general, the vectors address is 0xfffe00. This can be overriden
	55	with the '-defsym vectors_addr=0xbfc000' ld option. If you do this,
	56	then your startup code should also set the IVBR register accordingly.
	57	*/
	58
	59	PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xfffe00);
	60	.vectors DEFINED (vectors_addr) ? vectors_addr : 0xfffe00 :
	61	{
	62	KEEP (*(.vectors))
	63	}"
	64
	65	#
66	# We provide two emulations: a fixed on that defines some memory banks
67	# and a configurable one that includes a user provided memory definition.
68	#
69	case $GENERIC_BOARD in
70	yes\|1\|YES)
71	MEMORY_DEF="
72	/* Get memory banks definition from some user configuration file.
73	This file must be located in some linker directory (search path
74	with -L<dir>). See fixed memory banks emulation script. */
75	INCLUDE memory.x;
76	"
77	;;
78	*)
79	MEMORY_DEF="
80	/* Fixed definition of the available memory banks.
81	See generic emulation script for a user defined configuration. */
82	MEMORY
83	{
84	text (rx) : ORIGIN = $[$ROM_TOP - $ROM_SIZE + 1], LENGTH = ${ROM_SIZE} - 4
85	data : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
86	eeprom : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
87	rvec : ORIGIN = 0xFFFFFC, LENGTH = 4
88	}
89
90	/* Setup the stack on the top of the data memory bank. */
91	PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
92	"
93	;;
94	esac
95
96	STARTUP_CODE="
97	/* Startup code. */
98	KEEP ((.install0)) / Section should setup the stack pointer. */
99	KEEP ((.install1)) / Place holder for applications. */
100	KEEP ((.install2)) / Optional installation of data sections in RAM. */
101	KEEP ((.install3)) / Place holder for applications. */
102	KEEP ((.install4)) / Section that calls the main. */
103	"
104
105	FINISH_CODE="
106	/* Finish code. */
107	KEEP ((.fini0)) / Beginning of finish code (_exit symbol). */
108	KEEP ((.fini1)) / Place holder for applications. */
109	KEEP ((.fini2)) / C++ destructors. */
110	KEEP ((.fini3)) / Place holder for applications. */
111	KEEP ((.fini4)) / Runtime exit. */
112	"
113
114	PRE_COMPUTE_DATA_SIZE="
115	/* SCz: this does not work yet... This is supposed to force the loading
116	of _map_data.o (from libgcc.a) when the .data section is not empty.
117	By doing so, this should bring the code that copies the .data section
118	from ROM to RAM at init time.
119
120	___pre_comp_data_size = SIZEOF(.data);
121	__install_data_sections = ___pre_comp_data_size > 0 ?
122	__map_data_sections : 0;
123	*/
124	"
125
126	INSTALL_RELOC="
127	.install0 0 : { *(.install0) }
128	.install1 0 : { *(.install1) }
129	.install2 0 : { *(.install2) }
130	.install3 0 : { *(.install3) }
131	.install4 0 : { *(.install4) }
132	"
133
134	FINISH_RELOC="
135	.fini0 0 : { *(.fini0) }
136	.fini1 0 : { *(.fini1) }
137	.fini2 0 : { *(.fini2) }
138	.fini3 0 : { *(.fini3) }
139	.fini4 0 : { *(.fini4) }
140	"
141
142	BSS_DATA_RELOC="
143	.data1 0 : { *(.data1) }
144
145	/* We want the small data sections together, so single-instruction offsets
146	can access them all, and initialized data all before uninitialized, so
147	we can shorten the on-disk segment size. */
148	.sdata 0 : { *(.sdata) }
149	.sbss 0 : { *(.sbss) }
150	.scommon 0 : { *(.scommon) }
151	"
152
153	SOFT_REGS_RELOC="
154	.softregs 0 : { *(.softregs) }
155	"
156
157	cat <<EOF
250d07de	158	/* Copyright (C) 2014-2021 Free Software Foundation, Inc.
7b4ae824 JD	159
	160	Copying and distribution of this script, with or without modification,
	161	are permitted in any medium without royalty provided the copyright
	162	notice and this notice are preserved. */
	163
	164	${RELOCATING+/* Linker script for HCS12Z executable (PROM). */}
	165	${RELOCATING-/* Linker script for HCS12Z object file (ld -r). */}
	166
	167	OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	168	"${LITTLE_OUTPUT_FORMAT}")
	169	OUTPUT_ARCH(${OUTPUT_ARCH})
	170	${RELOCATING+ENTRY(${ENTRY})}
	171
	172	${RELOCATING+${LIB_SEARCH_DIRS}}
	173	${RELOCATING+${EXECUTABLE_SYMBOLS}}
	174	${RELOCATING+${MEMORY_DEF}}
	175
2bf2bf23	176	${RELOCATING+PROVIDE (_start = $[$ROM_TOP - $ROM_SIZE + 1]);}
7b4ae824 JD	177	SECTIONS
	178	{
	179	.hash ${RELOCATING-0} : { *(.hash) }
	180	.dynsym ${RELOCATING-0} : { *(.dynsym) }
	181	.dynstr ${RELOCATING-0} : { *(.dynstr) }
	182	.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
	183	.gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
	184	.gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
	185
	186	.rel.text ${RELOCATING-0} :
	187	{
	188	*(.rel.text)
	189	${RELOCATING+(.rel.text.)}
	190	${RELOCATING+(.rel.gnu.linkonce.t.)}
	191	}
	192	.rela.text ${RELOCATING-0} :
	193	{
	194	*(.rela.text)
	195	${RELOCATING+(.rela.text.)}
	196	${RELOCATING+(.rela.gnu.linkonce.t.)}
	197	}
	198	.rel.data ${RELOCATING-0} :
	199	{
	200	*(.rel.data)
	201	${RELOCATING+(.rel.data.)}
	202	${RELOCATING+(.rel.gnu.linkonce.d.)}
	203	}
	204	.rela.data ${RELOCATING-0} :
	205	{
	206	*(.rela.data)
	207	${RELOCATING+(.rela.data.)}
	208	${RELOCATING+(.rela.gnu.linkonce.d.)}
	209	}
	210	.rel.rodata ${RELOCATING-0} :
	211	{
	212	*(.rel.rodata)
	213	${RELOCATING+(.rel.rodata.)}
	214	${RELOCATING+(.rel.gnu.linkonce.r.)}
	215	}
	216	.rela.rodata ${RELOCATING-0} :
	217	{
	218	*(.rela.rodata)
	219	${RELOCATING+(.rela.rodata.)}
	220	${RELOCATING+(.rela.gnu.linkonce.r.)}
	221	}
	222	.rel.sdata ${RELOCATING-0} :
	223	{
	224	*(.rel.sdata)
	225	${RELOCATING+(.rel.sdata.)}
	226	${RELOCATING+(.rel.gnu.linkonce.s.)}
	227	}
	228	.rela.sdata ${RELOCATING-0} :
	229	{
	230	*(.rela.sdata)
	231	${RELOCATING+(.rela.sdata.)}
	232	${RELOCATING+(.rela.gnu.linkonce.s.)}
	233	}
	234	.rel.sbss ${RELOCATING-0} :
	235	{
	236	*(.rel.sbss)
	237	${RELOCATING+(.rel.sbss.)}
	238	${RELOCATING+(.rel.gnu.linkonce.sb.)}
	239	}
	240	.rela.sbss ${RELOCATING-0} :
241	{
242	*(.rela.sbss)
243	${RELOCATING+(.rela.sbss.)}
244	${RELOCATING+(.rel.gnu.linkonce.sb.)}
245	}
246	.rel.bss ${RELOCATING-0} :
247	{
248	*(.rel.bss)
249	${RELOCATING+(.rel.bss.)}
250	${RELOCATING+(.rel.gnu.linkonce.b.)}
251	}
252	.rela.bss ${RELOCATING-0} :
253	{
254	*(.rela.bss)
255	${RELOCATING+(.rela.bss.)}
256	${RELOCATING+(.rela.gnu.linkonce.b.)}
257	}
258	.rel.stext ${RELOCATING-0} : { *(.rel.stest) }
259	.rela.stext ${RELOCATING-0} : { *(.rela.stest) }
260	.rel.etext ${RELOCATING-0} : { *(.rel.etest) }
261	.rela.etext ${RELOCATING-0} : { *(.rela.etest) }
262	.rel.sdata ${RELOCATING-0} : { *(.rel.sdata) }
263	.rela.sdata ${RELOCATING-0} : { *(.rela.sdata) }
264	.rel.edata ${RELOCATING-0} : { *(.rel.edata) }
265	.rela.edata ${RELOCATING-0} : { *(.rela.edata) }
266	.rel.eit_v ${RELOCATING-0} : { *(.rel.eit_v) }
267	.rela.eit_v ${RELOCATING-0} : { *(.rela.eit_v) }
268	.rel.ebss ${RELOCATING-0} : { *(.rel.ebss) }
269	.rela.ebss ${RELOCATING-0} : { *(.rela.ebss) }
270	.rel.srodata ${RELOCATING-0} : { *(.rel.srodata) }
271	.rela.srodata ${RELOCATING-0} : { *(.rela.srodata) }
272	.rel.erodata ${RELOCATING-0} : { *(.rel.erodata) }
273	.rela.erodata ${RELOCATING-0} : { *(.rela.erodata) }
274	.rel.got ${RELOCATING-0} : { *(.rel.got) }
275	.rela.got ${RELOCATING-0} : { *(.rela.got) }
276	.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
277	.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
278	.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
279	.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
280	.rel.init ${RELOCATING-0} : { *(.rel.init) }
281	.rela.init ${RELOCATING-0} : { *(.rela.init) }
282	.rel.fini ${RELOCATING-0} : { *(.rel.fini) }
283	.rela.fini ${RELOCATING-0} : { *(.rela.fini) }
284	.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
285	.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
286
287	/* Start of text section. */
288	.stext ${RELOCATING-0} :
289	{
290	*(.stext)
291	} ${RELOCATING+ > ${TEXT_MEMORY}}
292
293	.init ${RELOCATING-0} :
294	{
2d3181c7	295	KEEP (*(SORT_NONE(.init)))
7b4ae824 JD	296	} ${RELOCATING+=${NOP-0}}
	297
	298	${RELOCATING-${INSTALL_RELOC}}
	299	${RELOCATING-${FINISH_RELOC}}
	300
	301	.text ${RELOCATING-0}:
	302	{
	303	/* Put startup code at beginning so that _start keeps same address. */
	304	${RELOCATING+${STARTUP_CODE}}
	305
7b4ae824 JD	306	*(.text)
7b4ae824 JD	307	${RELOCATING+(.text.)}
075a2b89	308	/* .gnu.warning sections are handled specially by elf.em. */
7b4ae824 JD	309	*(.gnu.warning)
	310	${RELOCATING+(.gnu.linkonce.t.)}
	311	${RELOCATING+*(.tramp)}
	312	${RELOCATING+(.tramp.)}
	313
2d3181c7	314	${RELOCATING+KEEP (*(SORT_NONE(.fini)))}
7b4ae824 JD	315	${RELOCATING+${FINISH_CODE}}
	316
	317	${RELOCATING+_etext = .;}
	318	${RELOCATING+PROVIDE (etext = .);}
	319	${RELOCATING+. = ALIGN(2);}
	320	} ${RELOCATING+ > ${TEXT_MEMORY} =${NOP}}
	321	.rvec ${RELOCATING-0} :
	322	{
	323	${RELOCATING+LONG(_start);}
	324	} ${RELOCATING+ > rvec}
	325	.eh_frame ${RELOCATING-0} :
	326	{
	327	KEEP (*(.eh_frame))
	328	} ${RELOCATING+ > ${TEXT_MEMORY}}
	329
	330	.gcc_except_table ${RELOCATING-0} :
	331	{
	332	*(.gcc_except_table)
	333	} ${RELOCATING+ > ${TEXT_MEMORY}}
	334
	335	.rodata ${RELOCATING-0} :
	336	{
	337	*(.rodata)
	338	${RELOCATING+(.rodata.)}
	339	${RELOCATING+(.gnu.linkonce.r)}
	340	${RELOCATING+. = ALIGN(2);}
	341	} ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}
	342
	343	.rodata1 ${RELOCATING-0} :
	344	{
	345	*(.rodata1)
	346	${RELOCATING+. = ALIGN(2);}
	347	} ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}
	348
	349	/* Constructor and destructor tables are in ROM. */
	350	${RELOCATING+${CTOR}}
	351	${RELOCATING+${DTOR}}
	352
	353	.jcr ${RELOCATING-0} :
	354	{
	355	KEEP (*(.jcr))
	356	} ${RELOCATING+ > ${TEXT_MEMORY}}
	357
	358	/* Start of the data section image in ROM. */
	359	${RELOCATING+__data_image = .;}
	360	${RELOCATING+PROVIDE (__data_image = .);}
	361
	362	/* All read-only sections that normally go in PROM must be above.
	363	We construct the DATA image section in PROM at end of all these
	364	read-only sections. The data image must be copied at init time.
	365	Refer to GNU ld, Section 3.6.8.2 Output Section LMA. */
	366	.data ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
	367	{
	368	${RELOCATING+__data_section_start = .;}
	369	${RELOCATING+PROVIDE (__data_section_start = .);}
	370
	371	${RELOCATING+${DATA_START_SYMBOLS}}
	372	${RELOCATING+*(.sdata)}
	373	*(.data)
	374	${RELOCATING+(.data.)}
	375	${RELOCATING+*(.data1)}
	376	${RELOCATING+(.gnu.linkonce.d.)}
	377	${CONSTRUCTING+CONSTRUCTORS}
	378
379	${RELOCATING+_edata = .;}
380	${RELOCATING+PROVIDE (edata = .);}
381	${RELOCATING+. = ALIGN(2);}
382	} ${RELOCATING+ > ${DATA_MEMORY} =0xffffffff}
383
384	${RELOCATING+__data_section_size = SIZEOF(.data);}
385	${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
386	${RELOCATING+__data_image_end = __data_image + __data_section_size;}
387
388	${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}
389
5b73b52b	390	.install ${RELOCATING-0}:
7b4ae824	391	{
57d5aa26	392	${RELOCATING+. = __data_section_size;}
5b73b52b	393	} ${RELOCATING+ > ${TEXT_MEMORY}}
7b4ae824 JD	394
	395	/* Relocation for some bss and data sections. */
	396	${RELOCATING-${BSS_DATA_RELOC}}
	397	${RELOCATING-${SOFT_REGS_RELOC}}
	398
	399	.bss ${RELOCATING-0} :
	400	{
	401	${RELOCATING+__bss_start = .;}
	402	${RELOCATING+*(.softregs)}
	403	${RELOCATING+*(.sbss)}
fe57a8c9	404	${RELOCATING+*(.common)}
7b4ae824	405	${RELOCATING+*(.scommon)}
2bf2bf23	406	${RELOCATING+*(.dynbss)}
7b4ae824 JD	407	*(.bss)
	408	${RELOCATING+(.bss.)}
	409	${RELOCATING+(.gnu.linkonce.b.)}
2bf2bf23	410	${RELOCATING+*(COMMON)}
7b4ae824 JD	411	${RELOCATING+PROVIDE (_end = .);}
	412	} ${RELOCATING+ > ${DATA_MEMORY}}
	413	${RELOCATING+__bss_size = SIZEOF(.bss);}
	414	${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}
	415
	416	.eeprom ${RELOCATING-0} :
	417	{
	418	*(.eeprom)
2bf2bf23	419	${RELOCATING+(.eeprom.)}
7b4ae824 JD	420	} ${RELOCATING+ > ${EEPROM_MEMORY}}
	421
	422	${RELOCATING+${VECTORS}}
	423
	424	/* Stabs debugging sections. */
	425	.stab 0 : { *(.stab) }
	426	.stabstr 0 : { *(.stabstr) }
	427	.stab.excl 0 : { *(.stab.excl) }
	428	.stab.exclstr 0 : { *(.stab.exclstr) }
	429	.stab.index 0 : { *(.stab.index) }
	430	.stab.indexstr 0 : { *(.stab.indexstr) }
	431
	432	.comment 0 : { *(.comment) }
	433
	434	/* Treatment of DWARF debug section must be at end of the linker
	435	script to avoid problems when there are undefined symbols. It's necessary
	436	to avoid that the DWARF section is relocated before such undefined
	437	symbols are found. */
	438	EOF
	439
	440	. $srcdir/scripttempl/DWARF.sc
	441
	442	cat <<EOF
	443	}
	444	EOF