2000-08-11 Stephane Carrez * sim-main.h (m68hc11_map_level): Define level of address mappings. * dv-m68hc11eepr.c (struct m68hc11eepr ): New flag to indicate whether the eeprom is currently mapped or not. (m68hc11eepr_port_event): Use the flag to see if we must unmap or map the eeprom. Update the flag to reflect the current state. Use M6811_EEPROM_LEVEL when mapping the eeprom. (m68hc11eepr_finish): Remove overlap hack. (attach_m68hc11eepr_regs): Use M6811_IO_LEVEL when mapping the config and control registers. * dv-m68hc11.c (m68hc11cpu_finish): Remove overlap hack. (attach_m68hc11_regs): Use M6811_IO_LEVEL. (m68hc11cpu_io_write): Likewise when unmapping and re-mapping. * dv-m68hc11spi.c (m68hc11spi_finish): Likewise. (attach_m68hc11spi_regs): Likewise. * dv-m68hc11tim.c (m68hc11tim_finish): Likewise. (attach_m68hc11tim_regs): Likewise. * dv-m68hc11sio.c (m68hc11sio_finish): Likewise. (attach_m68hc11sio_regs): Likewise. * interp.c (sim_open): Likewise. * dv-nvram.c (attach_nvram_regs): Likewise. Thu Jul 27 21:27:25 2000 Andrew Cagney * configure, config.in: Regenerate. 2000-06-25 Stephane Carrez * Makefile.in (SIM_RUN_OBJS): Define to use nrun.c * dv-m68hc11.c (m68hc11cpu_finish): Register detach address callback. (dv_m6811_detach_address_callback): New function to detach a device from an address space. * dv-m68hc11eepr.c (m68hc11eepr_port_event): Initialize config register according to --cpu-config option. * sim-main.h (_sim_cpu): Add cpu_config member. * interp.c (sim_open): Delete specific simulator options. * m68hc11_sim.c (cpu_option_handler): New options --emulos and -cpu-config to configure the simulator. (cpu_initialize): Initialize cpu_config member. 2000-06-24 Stephane Carrez * emulos.c: Fix indentation and comments. * gencode.c: Likewise. * dv-m68hc11tim.c (m68hc11tim_timer_event): Handle COMPARE_EVENT. (m68hc11tim_io_write_buffer): Write compare registers and setup compare event. * interp.c: Remove unused global variables. * interrupts.c (idefs): New compare interrupts. Fix indentation and comments. * interrupts.h: Likewise. 2000-06-18 Stephane Carrez * dv-m68hc11sio.c: Fix indentation and comments. Remove INT_PORT. * dv-m68hc11.c: Fix indentation and comments. (m68hc11cpu_port_event): Move initialization of M6811_HPRIO from here. * m68hc11_sim.c (cpu_reset): To here. * dv-m68hc11eepr.c: Fix indentation and comments. 2000-06-17 Stephane Carrez * dv-nvram.c: New file, rename from dv-pram.c. * dv-pram.c: Delete file. * sim-main.h: Incorporate m68hc11_sim.h. * m68hc11_sim.h: Delete file. * configure.in: Rename pram into nvram. * interp.c (sim_open): Likewise in creation of device tree. 2000-05-31 Stephane Carrez * interp.c (sim_open): Create the SPI device. * dv-m68hc11spi.c: New file for SPI device simulation. * configure.in (hw_extra_devices): Add SPI device. 2000-05-28 Stephane Carrez * interrupts.c (interrupts_initialize): Clear XIRQ accounting. (interrupts_process): Separate IRQ and XIRQ accounting. (interrupts_info): Report XIRQ accounting. * interrupts.h (struct interrupts): Added accounting for XIRQ. 2000-04-16 Stephane Carrez * dv-pram.c (attach_pram_regs): Fix the 'save-modified' mode. * m68hc11_sim.h (_sim_cpu): Allow configuration of cpu mode. * dv-m68hc11.c (attach_m68hc11_regs): Get the cpu MODA,MODB configuration from the 'mode' device tree property. (m68hc11cpu_port_event): Reset M6811_HPRIO to the cpu MODA, MODB configuration. 2000-02-24 Stephane Carrez * sim-main.h: Remove WITH_TARGET_* defines. * Makefile.in (SIM_EXTRA_CFLAGS): Specify the WITH_TARGET_* flags. 2000-02-08 Stephane Carrez * dv-m68hc11sio.c (m68hc11sio_port_event): Setup the SCI to 1200 baud when cpu is in bootstrap mode. * dv-m68hc11tim.c (m68hc11tim_io_write_buffer): Be able to write in the TCTN timer register. * dv-m68hc11sio.c (m68hc11sio_io_write_buffer): Divide cpu clock by 4 to obtain the E clock frequency. (sccr2_desc): Use M6811_TIE for TIE bit. (m68hc11sio_info): Fix baud rate report. * dv-m68hc11tim.c (to_realtime): Likewise. * interp.c (sim_open): When building device tree, only provide devices that do not exist yet. * emulos.c: Fix compilation pb under Windows. * dv-m68hc11.c (attach_m68hc11_regs): Get the clock frequency from the 'clock' property. 2000-01-02 Stephane Carrez * m68hc11_sim.h (*_REGNUM): Define. (_sim_cpu): New member cpu_page0_reg table. * interp.c (sim_create_inferior): Fill the cpu_page0_reg table with addresses of soft registers in .page0. (sim_fetch_register, sim_store_register): Use cpu_page0_reg table to get/set soft registers. 1999-12-31 Stephane Carrez * dv-m68hc11.c (m68hc11cpu_io_write_buffer): Clear byte to avoid returning random values. 1999-12-17 Stephane Carrez * gencode.c: Fix "subb N,x" that used a instead of b. 1999-09-09 Stephane Carrez * gencode.c: Fixed sbc8 and adc8 when there was a initial carry. 1999-09-01 Stephane Carrez * sim-main.h (SIM_HANDLES_LMA): Define to enable loading using lma. 1999-08-14 Stephane Carrez * dv-m68hc11.c (attach_m68hc11_regs): Save the size of the register region in the m68hc11cpu struct. (m68hc11cpu_io_write): When the IO mapping addres changes, detach the register region and re-attach it at the new address. (m68hc11cpu_io_read_buffer): Renamed base_address into attach_address. (m68hc11cpu_io_write_buffer): Likewise. Pass the hw pointer to m68hc11cpu_io_write. 1999-08-13 Stephane Carrez * gencode.c: For sbc8, check the carry and increment the source before trying to set the carry for the result. 1999-05-24 John S. Kallal * interp.c (sim_get_info): Don't crash if the command line is 0. Define prototype for sim_get_info() and init_system(). (sim_info): Correct call to sim_get_info(). 1999-05-16 Stephane Carrez * configure.in: Recognize m6811-*-*. * configure: Regenerate. * m68hc11_sim.h (cpu_ccr_update_add8, cpu_ccr_update_add16, cpu_ccr_update_sub8, cpu_ccr_update_sub16): Correct the computation of carry of 8 and 16-bits add and subtract. * gencode.c: Use cpu_ccr_update_sub8 for subtraction (carry and overflow set in a different manner than add). 1999-05-14 Stephane Carrez * dv-m68hc11.c (dv_m6811_attach_address_callback): Removed a trace message. * interp.c (sim_open, sim_create_inferior): Initialize the cpu_elf_start from the ELF header. * m68hc11_sim.c (cpu_initialize): Clear the new data members. (cpu_restart): Use cpu_elf_start as the starting address when the flag is set. (cpu_special): When cpu_use_elf_start is set, the WAI instruction exits the simulator (exit status is in D). * m68hc11_sim.h (_sim_cpu): Added members cpu_use_elf_start and cpu_elf_star to start execution at address specified in ELF file. 1999-05-02 Stephane Carrez * Makefile.in, config.in, configure, configure.in: New files. * gencode.c: New file, generation of 68HC11 interpreter. * m68hc11_sim.h, m68hc11_sim.c: New files, specific operations for interpreter. * interrupts.c, interrupts.h: New files, management of interrupts. * interp.c, sim-main.h, * dv-m68hc11.c, dv-m68hc11eepr.c, dv-m68hc11sio.c, dv-m68hc11tim.c, dv-pram.c: New files representing devices for 68HC11 (dv-pram.c is generic and could probably migrate to common). * emulos.c: New file, basic emulation of some os.