Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
- 2008 Free Software Foundation, Inc.
+ 2008, 2009 Free Software Foundation, Inc.
This file is part of GDB.
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
+#include "arch-utils.h"
#include <signal.h>
#include "gdb_string.h"
#include "symtab.h"
#include "exceptions.h"
#include "cli/cli-decode.h"
#include "gdbthread.h"
+#include "valprint.h"
+#include "inline-frame.h"
/* Functions exported for general use, in inferior.h: */
static void print_return_value (struct type *func_type,
struct type *value_type);
-static void finish_command_continuation (struct continuation_arg *,
- int error_p);
-
static void until_next_command (int);
static void until_command (char *, int);
static void float_info (char *, int);
-static void detach_command (char *, int);
-
static void disconnect_command (char *, int);
static void unset_environment_command (char *, int);
static void step_1 (int, int, char *);
static void step_once (int skip_subroutines, int single_inst, int count, int thread);
-static void step_1_continuation (struct continuation_arg *arg, int error_p);
static void next_command (char *, int);
void _initialize_infcmd (void);
-#define GO_USAGE "Usage: go <location>\n"
-
#define ERROR_NO_INFERIOR \
if (!target_has_execution) error (_("The program is not being run."));
ptid_t inferior_ptid;
-/* Last signal that the inferior received (why it stopped). */
-
-enum target_signal stop_signal;
-
/* Address at which inferior stopped. */
CORE_ADDR stop_pc;
-/* Chain containing status of breakpoint(s) that we have stopped at. */
-
-bpstat stop_bpstat;
-
/* Flag indicating that a command has proceeded the inferior past the
current breakpoint. */
int breakpoint_proceeded;
-/* Nonzero if stopped due to a step command. */
-
-int stop_step;
-
/* Nonzero if stopped due to completion of a stack dummy routine. */
int stop_stack_dummy;
int stopped_by_random_signal;
-/* Range to single step within.
- If this is nonzero, respond to a single-step signal
- by continuing to step if the pc is in this range. */
-
-CORE_ADDR step_range_start; /* Inclusive */
-CORE_ADDR step_range_end; /* Exclusive */
-
-/* Stack frame address as of when stepping command was issued.
- This is how we know when we step into a subroutine call,
- and how to set the frame for the breakpoint used to step out. */
-
-struct frame_id step_frame_id;
-
-enum step_over_calls_kind step_over_calls;
-
-/* If stepping, nonzero means step count is > 1
- so don't print frame next time inferior stops
- if it stops due to stepping. */
-
-int step_multi;
-
/* Environment to use for running inferior,
in format described in environ.h. */
struct gdb_environ *inferior_environ;
-
-/* When set, normal_stop will not call the normal_stop observer. */
-int suppress_normal_stop_observer = 0;
\f
/* Accessor routines. */
if (!terminal_name)
inferior_io_terminal = NULL;
else
- inferior_io_terminal = savestring (terminal_name, strlen (terminal_name));
+ inferior_io_terminal = xstrdup (terminal_name);
}
const char *
{
char *n, *old;
- n = gdbarch_construct_inferior_arguments (current_gdbarch,
- inferior_argc, inferior_argv);
+ n = construct_inferior_arguments (inferior_argc, inferior_argv);
old = set_inferior_args (n);
xfree (old);
}
/* Compute command-line string given argument vector. This does the
same shell processing as fork_inferior. */
char *
-construct_inferior_arguments (struct gdbarch *gdbarch, int argc, char **argv)
+construct_inferior_arguments (int argc, char **argv)
{
char *result;
/* We over-compute the size. It shouldn't matter. */
for (i = 0; i < argc; ++i)
- length += 2 * strlen (argv[i]) + 1 + 2 * (argv[i][0] == '\0');
+ length += 3 * strlen (argv[i]) + 1 + 2 * (argv[i][0] == '\0');
result = (char *) xmalloc (length);
out = result;
{
for (cp = argv[i]; *cp; ++cp)
{
- if (strchr (special, *cp) != NULL)
- *out++ = '\\';
- *out++ = *cp;
+ if (*cp == '\n')
+ {
+ /* A newline cannot be quoted with a backslash (it
+ just disappears), only by putting it inside
+ quotes. */
+ *out++ = '\'';
+ *out++ = '\n';
+ *out++ = '\'';
+ }
+ else
+ {
+ if (strchr (special, *cp) != NULL)
+ *out++ = '\\';
+ *out++ = *cp;
+ }
}
}
}
don't need to. */
target_find_description ();
- if (exec_bfd)
+ /* Now that we know the register layout, retrieve current PC. */
+ stop_pc = regcache_read_pc (get_current_regcache ());
+
+ /* If the solist is global across processes, there's no need to
+ refetch it here. */
+ if (exec_bfd && !gdbarch_has_global_solist (target_gdbarch))
{
/* Sometimes the platform-specific hook loads initial shared
libraries, and sometimes it doesn't. Try to do so first, so
#else
solib_add (NULL, from_tty, target, auto_solib_add);
#endif
+ }
+ if (exec_bfd)
+ {
/* Create the hooks to handle shared library load and unload
events. */
#ifdef SOLIB_CREATE_INFERIOR_HOOK
#endif
}
+ /* If the user sets watchpoints before execution having started,
+ then she gets software watchpoints, because GDB can't know which
+ target will end up being pushed, or if it supports hardware
+ watchpoints or not. breakpoint_re_set takes care of promoting
+ watchpoints to hardware watchpoints if possible, however, if this
+ new inferior doesn't load shared libraries or we don't pull in
+ symbols from any other source on this target/arch,
+ breakpoint_re_set is never called. Call it now so that software
+ watchpoints get a chance to be promoted to hardware watchpoints
+ if the now pushed target supports hardware watchpoints. */
+ breakpoint_re_set ();
+
observer_notify_inferior_created (target, from_tty);
}
target_require_runnable ();
if (from_tty
- && !query ("The program being debugged has been started already.\n\
-Start it from the beginning? "))
+ && !query (_("The program being debugged has been started already.\n\
+Start it from the beginning? ")))
error (_("Program not restarted."));
target_kill ();
- no_shared_libraries (NULL, from_tty);
- init_wait_for_inferior ();
}
}
run_command_1 (char *args, int from_tty, int tbreak_at_main)
{
char *exec_file;
+ struct cleanup *old_chain;
+ ptid_t ptid;
dont_repeat ();
kill_if_already_running (from_tty);
+
+ init_wait_for_inferior ();
clear_breakpoint_hit_counts ();
/* Clean up any leftovers from other runs. Some other things from
this function should probably be moved into target_pre_inferior. */
target_pre_inferior (from_tty);
- /* Purge old solib objfiles. */
- objfile_purge_solibs ();
-
- clear_solib ();
-
/* The comment here used to read, "The exec file is re-read every
time we do a generic_mourn_inferior, so we just have to worry
about the symbol file." The `generic_mourn_inferior' function
exec_file = (char *) get_exec_file (0);
+ if (non_stop && !target_supports_non_stop ())
+ error (_("The target does not support running in non-stop mode."));
+
/* We keep symbols from add-symbol-file, on the grounds that the
user might want to add some symbols before running the program
(right?). But sometimes (dynamic loading where the user manually
target_create_inferior (exec_file, get_inferior_args (),
environ_vector (inferior_environ), from_tty);
+ /* We're starting off a new process. When we get out of here, in
+ non-stop mode, finish the state of all threads of that process,
+ but leave other threads alone, as they may be stopped in internal
+ events --- the frontend shouldn't see them as stopped. In
+ all-stop, always finish the state of all threads, as we may be
+ resuming more than just the new process. */
+ if (non_stop)
+ ptid = pid_to_ptid (ptid_get_pid (inferior_ptid));
+ else
+ ptid = minus_one_ptid;
+ old_chain = make_cleanup (finish_thread_state_cleanup, &ptid);
+
/* Pass zero for FROM_TTY, because at this point the "run" command
has done its thing; now we are setting up the running program. */
post_create_inferior (¤t_target, 0);
/* Start the target running. */
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
-}
+ /* Since there was no error, there's no need to finish the thread
+ states here. */
+ discard_cleanups (old_chain);
+}
static void
run_command (char *args, int from_tty)
run_command_1 (args, from_tty, 1);
}
+static int
+proceed_thread_callback (struct thread_info *thread, void *arg)
+{
+ /* We go through all threads individually instead of compressing
+ into a single target `resume_all' request, because some threads
+ may be stopped in internal breakpoints/events, or stopped waiting
+ for its turn in the displaced stepping queue (that is, they are
+ running && !executing). The target side has no idea about why
+ the thread is stopped, so a `resume_all' command would resume too
+ much. If/when GDB gains a way to tell the target `hold this
+ thread stopped until I say otherwise', then we can optimize
+ this. */
+ if (!is_stopped (thread->ptid))
+ return 0;
+
+ switch_to_thread (thread->ptid);
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ return 0;
+}
+
void
-continue_command (char *proc_count_exp, int from_tty)
+ensure_valid_thread (void)
+{
+ if (ptid_equal (inferior_ptid, null_ptid)
+ || is_exited (inferior_ptid))
+ error (_("\
+Cannot execute this command without a live selected thread."));
+}
+
+void
+continue_1 (int all_threads)
+{
+ ERROR_NO_INFERIOR;
+
+ if (non_stop && all_threads)
+ {
+ /* Don't error out if the current thread is running, because
+ there may be other stopped threads. */
+ struct cleanup *old_chain;
+
+ /* Backup current thread and selected frame. */
+ old_chain = make_cleanup_restore_current_thread ();
+
+ iterate_over_threads (proceed_thread_callback, NULL);
+
+ /* Restore selected ptid. */
+ do_cleanups (old_chain);
+ }
+ else
+ {
+ ensure_valid_thread ();
+ ensure_not_running ();
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ }
+}
+
+/* continue [-a] [proceed-count] [&] */
+void
+continue_command (char *args, int from_tty)
{
int async_exec = 0;
+ int all_threads = 0;
ERROR_NO_INFERIOR;
/* Find out whether we must run in the background. */
- if (proc_count_exp != NULL)
- async_exec = strip_bg_char (&proc_count_exp);
+ if (args != NULL)
+ async_exec = strip_bg_char (&args);
/* If we must run in the background, but the target can't do it,
error out. */
async_disable_stdin ();
}
- /* If have argument (besides '&'), set proceed count of breakpoint
- we stopped at. */
- if (proc_count_exp != NULL)
+ if (args != NULL)
{
- bpstat bs = stop_bpstat;
+ if (strncmp (args, "-a", sizeof ("-a") - 1) == 0)
+ {
+ all_threads = 1;
+ args += sizeof ("-a") - 1;
+ if (*args == '\0')
+ args = NULL;
+ }
+ }
+
+ if (!non_stop && all_threads)
+ error (_("`-a' is meaningless in all-stop mode."));
+
+ if (args != NULL && all_threads)
+ error (_("\
+Can't resume all threads and specify proceed count simultaneously."));
+
+ /* If we have an argument left, set proceed count of breakpoint we
+ stopped at. */
+ if (args != NULL)
+ {
+ bpstat bs = NULL;
int num, stat;
int stopped = 0;
+ struct thread_info *tp;
+
+ if (non_stop)
+ tp = find_thread_ptid (inferior_ptid);
+ else
+ {
+ ptid_t last_ptid;
+ struct target_waitstatus ws;
+
+ get_last_target_status (&last_ptid, &ws);
+ tp = find_thread_ptid (last_ptid);
+ }
+ if (tp != NULL)
+ bs = tp->stop_bpstat;
while ((stat = bpstat_num (&bs, &num)) != 0)
if (stat > 0)
{
set_ignore_count (num,
- parse_and_eval_long (proc_count_exp) - 1,
+ parse_and_eval_long (args) - 1,
from_tty);
/* set_ignore_count prints a message ending with a period.
So print two spaces before "Continuing.". */
if (from_tty)
printf_filtered (_("Continuing.\n"));
- clear_proceed_status ();
-
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ continue_1 (all_threads);
}
\f
+/* Record the starting point of a "step" or "next" command. */
+
+static void
+set_step_frame (void)
+{
+ struct symtab_and_line sal;
+
+ find_frame_sal (get_current_frame (), &sal);
+ set_step_info (get_current_frame (), sal);
+}
+
/* Step until outside of current statement. */
static void
int thread = -1;
ERROR_NO_INFERIOR;
+ ensure_valid_thread ();
+ ensure_not_running ();
if (count_string)
async_exec = strip_bg_char (&count_string);
if (in_thread_list (inferior_ptid))
thread = pid_to_thread_id (inferior_ptid);
- set_longjmp_breakpoint ();
+ set_longjmp_breakpoint (thread);
make_cleanup (delete_longjmp_breakpoint_cleanup, &thread);
}
- /* In synchronous case, all is well, just use the regular for loop. */
+ /* In synchronous case, all is well; each step_once call will step once. */
if (!target_can_async_p ())
{
for (; count > 0; count--)
{
- clear_proceed_status ();
+ struct thread_info *tp;
+ step_once (skip_subroutines, single_inst, count, thread);
- frame = get_current_frame ();
- if (!frame) /* Avoid coredump here. Why tho? */
- error (_("No current frame"));
- step_frame_id = get_frame_id (frame);
-
- if (!single_inst)
- {
- find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
- if (step_range_end == 0)
- {
- char *name;
- if (find_pc_partial_function (stop_pc, &name, &step_range_start,
- &step_range_end) == 0)
- error (_("Cannot find bounds of current function"));
-
- target_terminal_ours ();
- printf_filtered (_("\
-Single stepping until exit from function %s, \n\
-which has no line number information.\n"), name);
- }
- }
+ if (target_has_execution
+ && !ptid_equal (inferior_ptid, null_ptid))
+ tp = inferior_thread ();
else
+ tp = NULL;
+
+ if (!tp || !tp->stop_step || !tp->step_multi)
{
- /* Say we are stepping, but stop after one insn whatever it does. */
- step_range_start = step_range_end = 1;
- if (!skip_subroutines)
- /* It is stepi.
- Don't step over function calls, not even to functions lacking
- line numbers. */
- step_over_calls = STEP_OVER_NONE;
+ /* If we stopped for some reason that is not stepping
+ there are no further steps to make. */
+ if (tp)
+ tp->step_multi = 0;
+ break;
}
-
- if (skip_subroutines)
- step_over_calls = STEP_OVER_ALL;
-
- step_multi = (count > 1);
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
-
- if (!stop_step)
- break;
}
do_cleanups (cleanups);
- return;
}
- /* In case of asynchronous target things get complicated, do only
- one step for now, before returning control to the event loop. Let
- the continuation figure out how many other steps we need to do,
- and handle them one at the time, through step_once(). */
else
{
+ /* In the case of an asynchronous target things get complicated;
+ do only one step for now, before returning control to the
+ event loop. Let the continuation figure out how many other
+ steps we need to do, and handle them one at the time, through
+ step_once. */
step_once (skip_subroutines, single_inst, count, thread);
+
/* We are running, and the continuation is installed. It will
disable the longjmp breakpoint as appropriate. */
discard_cleanups (cleanups);
}
}
+struct step_1_continuation_args
+{
+ int count;
+ int skip_subroutines;
+ int single_inst;
+ int thread;
+};
+
/* Called after we are done with one step operation, to check whether
we need to step again, before we print the prompt and return control
to the user. If count is > 1, we will need to do one more call to
proceed(), via step_once(). Basically it is like step_once and
step_1_continuation are co-recursive. */
static void
-step_1_continuation (struct continuation_arg *arg, int error_p)
+step_1_continuation (void *args)
{
- int count;
- int skip_subroutines;
- int single_inst;
- int thread;
-
- skip_subroutines = arg->data.integer;
- single_inst = arg->next->data.integer;
- count = arg->next->next->data.integer;
- thread = arg->next->next->next->data.integer;
+ struct step_1_continuation_args *a = args;
- if (error_p || !step_multi || !stop_step)
+ if (target_has_execution)
{
- /* We either hit an error, or stopped for some reason
- that is not stepping, or there are no further steps
- to make. Cleanup. */
- if (!single_inst || skip_subroutines)
- delete_longjmp_breakpoint (thread);
- step_multi = 0;
+ struct thread_info *tp;
+
+ tp = inferior_thread ();
+ if (tp->step_multi && tp->stop_step)
+ {
+ /* There are more steps to make, and we did stop due to
+ ending a stepping range. Do another step. */
+ step_once (a->skip_subroutines, a->single_inst,
+ a->count - 1, a->thread);
+ return;
+ }
+ tp->step_multi = 0;
}
- else
- step_once (skip_subroutines, single_inst, count - 1, thread);
+
+ /* We either stopped for some reason that is not stepping, or there
+ are no further steps to make. Cleanup. */
+ if (!a->single_inst || a->skip_subroutines)
+ delete_longjmp_breakpoint (a->thread);
}
-/* Do just one step operation. If count >1 we will have to set up a
- continuation to be done after the target stops (after this one
- step). This is useful to implement the 'step n' kind of commands, in
- case of asynchronous targets. We had to split step_1 into two parts,
- one to be done before proceed() and one afterwards. This function is
- called in case of step n with n>1, after the first step operation has
- been completed.*/
-static void
+/* Do just one step operation. This is useful to implement the 'step
+ n' kind of commands. In case of asynchronous targets, we will have
+ to set up a continuation to be done after the target stops (after
+ this one step). For synch targets, the caller handles further
+ stepping. */
+
+static void
step_once (int skip_subroutines, int single_inst, int count, int thread)
-{
- struct continuation_arg *arg1;
- struct continuation_arg *arg2;
- struct continuation_arg *arg3;
- struct continuation_arg *arg4;
- struct frame_info *frame;
+{
+ struct frame_info *frame = get_current_frame ();
if (count > 0)
{
+ /* Don't assume THREAD is a valid thread id. It is set to -1 if
+ the longjmp breakpoint was not required. Use the
+ INFERIOR_PTID thread instead, which is the same thread when
+ THREAD is set. */
+ struct thread_info *tp = inferior_thread ();
clear_proceed_status ();
-
- frame = get_current_frame ();
- if (!frame) /* Avoid coredump here. Why tho? */
- error (_("No current frame"));
- step_frame_id = get_frame_id (frame);
+ set_step_frame ();
if (!single_inst)
{
- find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
+ CORE_ADDR pc;
- /* If we have no line info, switch to stepi mode. */
- if (step_range_end == 0 && step_stop_if_no_debug)
+ /* Step at an inlined function behaves like "down". */
+ if (!skip_subroutines && !single_inst
+ && inline_skipped_frames (inferior_ptid))
{
- step_range_start = step_range_end = 1;
+ step_into_inline_frame (inferior_ptid);
+ if (count > 1)
+ step_once (skip_subroutines, single_inst, count - 1, thread);
+ else
+ /* Pretend that we've stopped. */
+ normal_stop ();
+ return;
}
- else if (step_range_end == 0)
+
+ pc = get_frame_pc (frame);
+ find_pc_line_pc_range (pc,
+ &tp->step_range_start, &tp->step_range_end);
+
+ /* If we have no line info, switch to stepi mode. */
+ if (tp->step_range_end == 0 && step_stop_if_no_debug)
+ tp->step_range_start = tp->step_range_end = 1;
+ else if (tp->step_range_end == 0)
{
char *name;
- if (find_pc_partial_function (stop_pc, &name, &step_range_start,
- &step_range_end) == 0)
+ if (find_pc_partial_function (pc, &name,
+ &tp->step_range_start,
+ &tp->step_range_end) == 0)
error (_("Cannot find bounds of current function"));
target_terminal_ours ();
else
{
/* Say we are stepping, but stop after one insn whatever it does. */
- step_range_start = step_range_end = 1;
+ tp->step_range_start = tp->step_range_end = 1;
if (!skip_subroutines)
/* It is stepi.
Don't step over function calls, not even to functions lacking
line numbers. */
- step_over_calls = STEP_OVER_NONE;
+ tp->step_over_calls = STEP_OVER_NONE;
}
if (skip_subroutines)
- step_over_calls = STEP_OVER_ALL;
+ tp->step_over_calls = STEP_OVER_ALL;
- step_multi = (count > 1);
+ tp->step_multi = (count > 1);
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
- arg1 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg2 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg3 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg4 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg1->next = arg2;
- arg1->data.integer = skip_subroutines;
- arg2->next = arg3;
- arg2->data.integer = single_inst;
- arg3->next = arg4;
- arg3->data.integer = count;
- arg4->next = NULL;
- arg4->data.integer = thread;
- add_intermediate_continuation (step_1_continuation, arg1);
+
+ /* For async targets, register a continuation to do any
+ additional steps. For sync targets, the caller will handle
+ further stepping. */
+ if (target_can_async_p ())
+ {
+ struct step_1_continuation_args *args;
+
+ args = xmalloc (sizeof (*args));
+ args->skip_subroutines = skip_subroutines;
+ args->single_inst = single_inst;
+ args->count = count;
+ args->thread = thread;
+
+ add_intermediate_continuation (tp, step_1_continuation, args, xfree);
+ }
}
}
static void
jump_command (char *arg, int from_tty)
{
+ struct gdbarch *gdbarch = get_current_arch ();
CORE_ADDR addr;
struct symtabs_and_lines sals;
struct symtab_and_line sal;
int async_exec = 0;
ERROR_NO_INFERIOR;
+ ensure_valid_thread ();
+ ensure_not_running ();
/* Find out whether we must run in the background. */
if (arg != NULL)
sfn = find_pc_function (sal.pc);
if (fn != NULL && sfn != fn)
{
- if (!query ("Line %d is not in `%s'. Jump anyway? ", sal.line,
+ if (!query (_("Line %d is not in `%s'. Jump anyway? "), sal.line,
SYMBOL_PRINT_NAME (fn)))
{
error (_("Not confirmed."));
if (sfn != NULL)
{
fixup_symbol_section (sfn, 0);
- if (section_is_overlay (SYMBOL_BFD_SECTION (sfn)) &&
- !section_is_mapped (SYMBOL_BFD_SECTION (sfn)))
+ if (section_is_overlay (SYMBOL_OBJ_SECTION (sfn)) &&
+ !section_is_mapped (SYMBOL_OBJ_SECTION (sfn)))
{
- if (!query ("WARNING!!! Destination is in unmapped overlay! Jump anyway? "))
+ if (!query (_("WARNING!!! Destination is in unmapped overlay! Jump anyway? ")))
{
error (_("Not confirmed."));
/* NOTREACHED */
if (from_tty)
{
printf_filtered (_("Continuing at "));
- fputs_filtered (paddress (addr), gdb_stdout);
+ fputs_filtered (paddress (gdbarch, addr), gdb_stdout);
printf_filtered (".\n");
}
go_command (char *line_no, int from_tty)
{
if (line_no == (char *) NULL || !*line_no)
- printf_filtered (GO_USAGE);
+ printf_filtered (_("Usage: go <location>\n"));
else
{
tbreak_command (line_no, from_tty);
dont_repeat (); /* Too dangerous. */
ERROR_NO_INFERIOR;
+ ensure_valid_thread ();
+ ensure_not_running ();
/* Find out whether we must run in the background. */
if (signum_exp != NULL)
}
clear_proceed_status ();
- /* "signal 0" should not get stuck if we are stopped at a breakpoint.
- FIXME: Neither should "signal foo" but when I tried passing
- (CORE_ADDR)-1 unconditionally I got a testsuite failure which I haven't
- tried to track down yet. */
- proceed (oursig == TARGET_SIGNAL_0 ? (CORE_ADDR) -1 : stop_pc, oursig, 0);
+ proceed ((CORE_ADDR) -1, oursig, 0);
}
/* Proceed until we reach a different source line with pc greater than
CORE_ADDR pc;
struct symbol *func;
struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
clear_proceed_status ();
+ set_step_frame ();
frame = get_current_frame ();
than the current line (if in symbolic section) or pc (if
not). */
- pc = read_pc ();
+ pc = get_frame_pc (frame);
func = find_pc_function (pc);
if (!func)
if (msymbol == NULL)
error (_("Execution is not within a known function."));
- step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
- step_range_end = pc;
+ tp->step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
+ tp->step_range_end = pc;
}
else
{
sal = find_pc_line (pc, 0);
- step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
- step_range_end = sal.end;
+ tp->step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
+ tp->step_range_end = sal.end;
}
- step_over_calls = STEP_OVER_ALL;
- step_frame_id = get_frame_id (frame);
+ tp->step_over_calls = STEP_OVER_ALL;
- step_multi = 0; /* Only one call to proceed */
+ tp->step_multi = 0; /* Only one call to proceed */
proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
}
static void
print_return_value (struct type *func_type, struct type *value_type)
{
- struct gdbarch *gdbarch = current_gdbarch;
+ struct gdbarch *gdbarch = get_regcache_arch (stop_registers);
struct cleanup *old_chain;
struct ui_stream *stb;
struct value *value;
if (value)
{
+ struct value_print_options opts;
+
/* Print it. */
stb = ui_out_stream_new (uiout);
old_chain = make_cleanup_ui_out_stream_delete (stb);
ui_out_field_fmt (uiout, "gdb-result-var", "$%d",
record_latest_value (value));
ui_out_text (uiout, " = ");
- value_print (value, stb->stream, 0, Val_no_prettyprint);
+ get_raw_print_options (&opts);
+ value_print (value, stb->stream, &opts);
ui_out_field_stream (uiout, "return-value", stb);
ui_out_text (uiout, "\n");
do_cleanups (old_chain);
soon as it detects that the target has stopped. This function is
called via the cmd_continuation pointer. */
-static void
-finish_command_continuation (struct continuation_arg *arg, int error_p)
+struct finish_command_continuation_args
{
- struct symbol *function;
struct breakpoint *breakpoint;
- struct cleanup *cleanups;
+ struct symbol *function;
+};
- breakpoint = (struct breakpoint *) arg->data.pointer;
- function = (struct symbol *) arg->next->data.pointer;
+static void
+finish_command_continuation (void *arg)
+{
+ struct finish_command_continuation_args *a = arg;
+ struct thread_info *tp = NULL;
+ bpstat bs = NULL;
- if (!error_p)
+ if (!ptid_equal (inferior_ptid, null_ptid)
+ && target_has_execution
+ && is_stopped (inferior_ptid))
{
- if (bpstat_find_breakpoint (stop_bpstat, breakpoint) != NULL
- && function != NULL)
- {
- struct type *value_type;
-
- value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (function));
- if (!value_type)
- internal_error (__FILE__, __LINE__,
- _("finish_command: function has no target type"));
-
- if (TYPE_CODE (value_type) != TYPE_CODE_VOID)
- print_return_value (SYMBOL_TYPE (function), value_type);
- }
+ tp = inferior_thread ();
+ bs = tp->stop_bpstat;
+ }
+
+ if (bpstat_find_breakpoint (bs, a->breakpoint) != NULL
+ && a->function != NULL)
+ {
+ struct type *value_type;
+
+ value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (a->function));
+ if (!value_type)
+ internal_error (__FILE__, __LINE__,
+ _("finish_command: function has no target type"));
- /* We suppress normal call of normal_stop observer and do it here so that
- that *stopped notification includes the return value. */
- observer_notify_normal_stop (stop_bpstat);
+ if (TYPE_CODE (value_type) != TYPE_CODE_VOID)
+ print_return_value (SYMBOL_TYPE (a->function), value_type);
+ }
+
+ /* We suppress normal call of normal_stop observer and do it here so
+ that the *stopped notification includes the return value. */
+ if (bs != NULL && tp->proceed_to_finish)
+ observer_notify_normal_stop (bs, 1 /* print frame */);
+ delete_breakpoint (a->breakpoint);
+}
+
+static void
+finish_command_continuation_free_arg (void *arg)
+{
+ xfree (arg);
+}
+
+/* finish_backward -- helper function for finish_command. */
+
+static void
+finish_backward (struct symbol *function)
+{
+ struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
+ struct breakpoint *breakpoint;
+ struct cleanup *old_chain;
+ CORE_ADDR pc;
+ CORE_ADDR func_addr;
+ int back_up;
+
+ pc = get_frame_pc (get_current_frame ());
+
+ if (find_pc_partial_function (pc, NULL, &func_addr, NULL) == 0)
+ internal_error (__FILE__, __LINE__,
+ _("Finish: couldn't find function."));
+
+ sal = find_pc_line (func_addr, 0);
+
+ /* We don't need a return value. */
+ tp->proceed_to_finish = 0;
+ /* Special case: if we're sitting at the function entry point,
+ then all we need to do is take a reverse singlestep. We
+ don't need to set a breakpoint, and indeed it would do us
+ no good to do so.
+
+ Note that this can only happen at frame #0, since there's
+ no way that a function up the stack can have a return address
+ that's equal to its entry point. */
+
+ if (sal.pc != pc)
+ {
+ struct frame_info *frame = get_selected_frame (NULL);
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+
+ /* Set breakpoint and continue. */
+ breakpoint =
+ set_momentary_breakpoint (gdbarch, sal,
+ get_stack_frame_id (frame),
+ bp_breakpoint);
+ /* Tell the breakpoint to keep quiet. We won't be done
+ until we've done another reverse single-step. */
+ make_breakpoint_silent (breakpoint);
+ old_chain = make_cleanup_delete_breakpoint (breakpoint);
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ /* We will be stopped when proceed returns. */
+ back_up = bpstat_find_breakpoint (tp->stop_bpstat, breakpoint) != NULL;
+ do_cleanups (old_chain);
}
+ else
+ back_up = 1;
+ if (back_up)
+ {
+ /* If in fact we hit the step-resume breakpoint (and not
+ some other breakpoint), then we're almost there --
+ we just need to back up by one more single-step. */
+ tp->step_range_start = tp->step_range_end = 1;
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
+ }
+ return;
+}
+
+/* finish_forward -- helper function for finish_command. */
+
+static void
+finish_forward (struct symbol *function, struct frame_info *frame)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct symtab_and_line sal;
+ struct thread_info *tp = inferior_thread ();
+ struct breakpoint *breakpoint;
+ struct cleanup *old_chain;
+ struct finish_command_continuation_args *cargs;
+
+ sal = find_pc_line (get_frame_pc (frame), 0);
+ sal.pc = get_frame_pc (frame);
+
+ breakpoint = set_momentary_breakpoint (gdbarch, sal,
+ get_stack_frame_id (frame),
+ bp_finish);
+
+ old_chain = make_cleanup_delete_breakpoint (breakpoint);
+
+ tp->proceed_to_finish = 1; /* We want stop_registers, please... */
+ cargs = xmalloc (sizeof (*cargs));
+
+ cargs->breakpoint = breakpoint;
+ cargs->function = function;
+ add_continuation (tp, finish_command_continuation, cargs,
+ finish_command_continuation_free_arg);
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
- suppress_normal_stop_observer = 0;
- delete_breakpoint (breakpoint);
+ discard_cleanups (old_chain);
+ if (!target_can_async_p ())
+ do_all_continuations ();
}
/* "finish": Set a temporary breakpoint at the place the selected
static void
finish_command (char *arg, int from_tty)
{
- struct symtab_and_line sal;
struct frame_info *frame;
struct symbol *function;
- struct breakpoint *breakpoint;
- struct cleanup *old_chain;
- struct continuation_arg *arg1, *arg2, *arg3;
int async_exec = 0;
if (async_exec && !target_can_async_p ())
error (_("Asynchronous execution not supported on this target."));
+ /* Don't try to async in reverse. */
+ if (async_exec && execution_direction == EXEC_REVERSE)
+ error (_("Asynchronous 'finish' not supported in reverse."));
+
/* If we are not asked to run in the bg, then prepare to run in the
foreground, synchronously. */
if (!async_exec && target_can_async_p ())
clear_proceed_status ();
- sal = find_pc_line (get_frame_pc (frame), 0);
- sal.pc = get_frame_pc (frame);
-
- breakpoint = set_momentary_breakpoint (sal, get_frame_id (frame), bp_finish);
+ /* Finishing from an inline frame is completely different. We don't
+ try to show the "return value" - no way to locate it. So we do
+ not need a completion. */
+ if (get_frame_type (get_selected_frame (_("No selected frame.")))
+ == INLINE_FRAME)
+ {
+ /* Claim we are stepping in the calling frame. An empty step
+ range means that we will stop once we aren't in a function
+ called by that frame. We don't use the magic "1" value for
+ step_range_end, because then infrun will think this is nexti,
+ and not step over the rest of this inlined function call. */
+ struct thread_info *tp = inferior_thread ();
+ struct symtab_and_line empty_sal;
+ init_sal (&empty_sal);
+ set_step_info (frame, empty_sal);
+ tp->step_range_start = tp->step_range_end = get_frame_pc (frame);
+ tp->step_over_calls = STEP_OVER_ALL;
+
+ /* Print info on the selected frame, including level number but not
+ source. */
+ if (from_tty)
+ {
+ printf_filtered (_("Run till exit from "));
+ print_stack_frame (get_selected_frame (NULL), 1, LOCATION);
+ }
- old_chain = make_cleanup_delete_breakpoint (breakpoint);
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
+ return;
+ }
/* Find the function we will return from. */
source. */
if (from_tty)
{
- printf_filtered (_("Run till exit from "));
+ if (execution_direction == EXEC_REVERSE)
+ printf_filtered (_("Run back to call of "));
+ else
+ printf_filtered (_("Run till exit from "));
+
print_stack_frame (get_selected_frame (NULL), 1, LOCATION);
}
- proceed_to_finish = 1; /* We want stop_registers, please... */
- make_cleanup_restore_integer (&suppress_normal_stop_observer);
- suppress_normal_stop_observer = 1;
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
-
- arg1 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg2 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg1->next = arg2;
- arg2->next = NULL;
- arg1->data.pointer = breakpoint;
- arg2->data.pointer = function;
- add_continuation (finish_command_continuation, arg1);
-
- /* Do this only if not running asynchronously or if the target
- cannot do async execution. Otherwise, complete this command when
- the target actually stops, in fetch_inferior_event. */
- discard_cleanups (old_chain);
- if (!target_can_async_p ())
- do_all_continuations (0);
+ if (execution_direction == EXEC_REVERSE)
+ finish_backward (function);
+ else
+ finish_forward (function, frame);
}
\f
static void
program_info (char *args, int from_tty)
{
- bpstat bs = stop_bpstat;
- int num;
- int stat = bpstat_num (&bs, &num);
+ bpstat bs;
+ int num, stat;
+ struct thread_info *tp;
+ ptid_t ptid;
if (!target_has_execution)
{
return;
}
+ if (non_stop)
+ ptid = inferior_ptid;
+ else
+ {
+ struct target_waitstatus ws;
+ get_last_target_status (&ptid, &ws);
+ }
+
+ if (ptid_equal (ptid, null_ptid) || is_exited (ptid))
+ error (_("Invalid selected thread."));
+ else if (is_running (ptid))
+ error (_("Selected thread is running."));
+
+ tp = find_thread_ptid (ptid);
+ bs = tp->stop_bpstat;
+ stat = bpstat_num (&bs, &num);
+
target_files_info ();
printf_filtered (_("Program stopped at %s.\n"),
- hex_string ((unsigned long) stop_pc));
- if (stop_step)
+ paddress (target_gdbarch, stop_pc));
+ if (tp->stop_step)
printf_filtered (_("It stopped after being stepped.\n"));
else if (stat != 0)
{
stat = bpstat_num (&bs, &num);
}
}
- else if (stop_signal != TARGET_SIGNAL_0)
+ else if (tp->stop_signal != TARGET_SIGNAL_0)
{
printf_filtered (_("It stopped with signal %s, %s.\n"),
- target_signal_to_name (stop_signal),
- target_signal_to_string (stop_signal));
+ target_signal_to_name (tp->stop_signal),
+ target_signal_to_string (tp->stop_signal));
}
if (!from_tty)
|| TYPE_CODE (register_type (gdbarch, i)) == TYPE_CODE_DECFLOAT)
{
int j;
+ struct value_print_options opts;
+ get_user_print_options (&opts);
+ opts.deref_ref = 1;
val_print (register_type (gdbarch, i), buffer, 0, 0,
- file, 0, 1, 0, Val_pretty_default, current_language);
+ file, 0, &opts, current_language);
fprintf_filtered (file, "\t(raw 0x");
for (j = 0; j < register_size (gdbarch, i); j++)
}
else
{
+ struct value_print_options opts;
+
/* Print the register in hex. */
+ get_formatted_print_options (&opts, 'x');
+ opts.deref_ref = 1;
val_print (register_type (gdbarch, i), buffer, 0, 0,
- file, 'x', 1, 0, Val_pretty_default, current_language);
+ file, 0, &opts,
+ current_language);
/* If not a vector register, print it also according to its
natural format. */
if (TYPE_VECTOR (register_type (gdbarch, i)) == 0)
{
+ get_user_print_options (&opts);
+ opts.deref_ref = 1;
fprintf_filtered (file, "\t");
val_print (register_type (gdbarch, i), buffer, 0, 0,
- file, 0, 1, 0, Val_pretty_default, current_language);
+ file, 0, &opts, current_language);
}
}
/* A register name? */
{
- int regnum = frame_map_name_to_regnum (frame, start, end - start);
+ int regnum = user_reg_map_name_to_regnum (gdbarch, start, end - start);
if (regnum >= 0)
{
/* User registers lie completely outside of the range of
if (regnum >= gdbarch_num_regs (gdbarch)
+ gdbarch_num_pseudo_regs (gdbarch))
{
+ struct value_print_options opts;
struct value *val = value_of_user_reg (regnum, frame);
printf_filtered ("%s: ", start);
+ get_formatted_print_options (&opts, 'x');
print_scalar_formatted (value_contents (val),
check_typedef (value_type (val)),
- 'x', 0, gdb_stdout);
+ &opts, 0, gdb_stdout);
printf_filtered ("\n");
}
else
}
}
- /* A register number? (how portable is this one?). */
- {
- char *endptr;
- int regnum = strtol (start, &endptr, 0);
- if (endptr == end
- && regnum >= 0
- && regnum < gdbarch_num_regs (gdbarch)
- + gdbarch_num_pseudo_regs (gdbarch))
- {
- gdbarch_print_registers_info (gdbarch, gdb_stdout,
- frame, regnum, fpregs);
- continue;
- }
- }
-
/* A register group? */
{
struct reggroup *group;
}
static void
-print_vector_info (struct gdbarch *gdbarch, struct ui_file *file,
+print_vector_info (struct ui_file *file,
struct frame_info *frame, const char *args)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+
if (gdbarch_print_vector_info_p (gdbarch))
gdbarch_print_vector_info (gdbarch, file, frame, args);
else
if (!target_has_registers)
error (_("The program has no registers now."));
- print_vector_info (current_gdbarch, gdb_stdout,
- get_selected_frame (NULL), args);
+ print_vector_info (gdb_stdout, get_selected_frame (NULL), args);
}
\f
+/* Kill the inferior process. Make us have no inferior. */
+
+static void
+kill_command (char *arg, int from_tty)
+{
+ /* FIXME: This should not really be inferior_ptid (or target_has_execution).
+ It should be a distinct flag that indicates that a target is active, cuz
+ some targets don't have processes! */
+
+ if (ptid_equal (inferior_ptid, null_ptid))
+ error (_("The program is not being run."));
+ if (!query (_("Kill the program being debugged? ")))
+ error (_("Not confirmed."));
+ target_kill ();
+
+ /* If we still have other inferiors to debug, then don't mess with
+ with their threads. */
+ if (!have_inferiors ())
+ {
+ init_thread_list (); /* Destroy thread info */
+
+ /* Killing off the inferior can leave us with a core file. If
+ so, print the state we are left in. */
+ if (target_has_stack)
+ {
+ printf_filtered (_("In %s,\n"), target_longname);
+ print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC);
+ }
+ }
+ bfd_cache_close_all ();
+}
+
+/* Used in `attach&' command. ARG is a point to an integer
+ representing a process id. Proceed threads of this process iff
+ they stopped due to debugger request, and when they did, they
+ reported a clean stop (TARGET_SIGNAL_0). Do not proceed threads
+ that have been explicitly been told to stop. */
+
+static int
+proceed_after_attach_callback (struct thread_info *thread,
+ void *arg)
+{
+ int pid = * (int *) arg;
+
+ if (ptid_get_pid (thread->ptid) == pid
+ && !is_exited (thread->ptid)
+ && !is_executing (thread->ptid)
+ && !thread->stop_requested
+ && thread->stop_signal == TARGET_SIGNAL_0)
+ {
+ switch_to_thread (thread->ptid);
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ }
+
+ return 0;
+}
+
+static void
+proceed_after_attach (int pid)
+{
+ /* Don't error out if the current thread is running, because
+ there may be other stopped threads. */
+ struct cleanup *old_chain;
+
+ /* Backup current thread and selected frame. */
+ old_chain = make_cleanup_restore_current_thread ();
+
+ iterate_over_threads (proceed_after_attach_callback, &pid);
+
+ /* Restore selected ptid. */
+ do_cleanups (old_chain);
+}
/*
* TODO:
{
char *exec_file;
char *full_exec_path = NULL;
+ struct inferior *inferior;
- stop_soon = NO_STOP_QUIETLY;
+ inferior = current_inferior ();
+ inferior->stop_soon = NO_STOP_QUIETLY;
/* If no exec file is yet known, try to determine it from the
process itself. */
filename. Not much more we can do...)
*/
if (!source_full_path_of (exec_file, &full_exec_path))
- full_exec_path = savestring (exec_file, strlen (exec_file));
+ full_exec_path = xstrdup (exec_file);
exec_file_attach (full_exec_path, from_tty);
symbol_file_add_main (full_exec_path, from_tty);
target_terminal_inferior ();
if (async_exec)
- proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
+ {
+ /* The user requested an `attach&', so be sure to leave threads
+ that didn't get a signal running. */
+
+ /* Immediatelly resume all suspended threads of this inferior,
+ and this inferior only. This should have no effect on
+ already running threads. If a thread has been stopped with a
+ signal, leave it be. */
+ if (non_stop)
+ proceed_after_attach (inferior->pid);
+ else
+ {
+ if (inferior_thread ()->stop_signal == TARGET_SIGNAL_0)
+ {
+ clear_proceed_status ();
+ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+ }
+ }
+ }
else
{
+ /* The user requested a plain `attach', so be sure to leave
+ the inferior stopped. */
+
if (target_can_async_p ())
async_enable_stdin ();
+
+ /* At least the current thread is already stopped. */
+
+ /* In all-stop, by definition, all threads have to be already
+ stopped at this point. In non-stop, however, although the
+ selected thread is stopped, others may still be executing.
+ Be sure to explicitly stop all threads of the process. This
+ should have no effect on already stopped threads. */
+ if (non_stop)
+ target_stop (pid_to_ptid (inferior->pid));
+
+ /* Tell the user/frontend where we're stopped. */
normal_stop ();
if (deprecated_attach_hook)
deprecated_attach_hook ();
}
}
-static void
-attach_command_continuation (struct continuation_arg *arg, int error_p)
+struct attach_command_continuation_args
{
char *args;
int from_tty;
int async_exec;
+};
- args = (char *) arg->data.pointer;
- from_tty = arg->next->data.integer;
- async_exec = arg->next->next->data.integer;
+static void
+attach_command_continuation (void *args)
+{
+ struct attach_command_continuation_args *a = args;
+ attach_command_post_wait (a->args, a->from_tty, a->async_exec);
+}
- attach_command_post_wait (args, from_tty, async_exec);
+static void
+attach_command_continuation_free_args (void *args)
+{
+ struct attach_command_continuation_args *a = args;
+ xfree (a->args);
+ xfree (a);
}
void
char *exec_file;
char *full_exec_path = NULL;
int async_exec = 0;
+ struct cleanup *back_to = make_cleanup (null_cleanup, NULL);
dont_repeat (); /* Not for the faint of heart */
- if (target_has_execution)
+ if (gdbarch_has_global_solist (target_gdbarch))
+ /* Don't complain if all processes share the same symbol
+ space. */
+ ;
+ else if (target_has_execution)
{
- if (query ("A program is being debugged already. Kill it? "))
+ if (query (_("A program is being debugged already. Kill it? ")))
target_kill ();
else
error (_("Not killed."));
this function should probably be moved into target_pre_inferior. */
target_pre_inferior (from_tty);
- /* Clear out solib state. Otherwise the solib state of the previous
- inferior might have survived and is entirely wrong for the new
- target. This has been observed on GNU/Linux using glibc 2.3. How
- to reproduce:
-
- bash$ ./foo&
- [1] 4711
- bash$ ./foo&
- [1] 4712
- bash$ gdb ./foo
- [...]
- (gdb) attach 4711
- (gdb) detach
- (gdb) attach 4712
- Cannot access memory at address 0xdeadbeef
- */
- clear_solib ();
+ if (non_stop && !target_supports_non_stop ())
+ error (_("Cannot attach to this target in non-stop mode"));
if (args)
{
{
/* Simulate synchronous execution */
async_disable_stdin ();
+ make_cleanup ((make_cleanup_ftype *)async_enable_stdin, NULL);
}
target_attach (args, from_tty);
init_wait_for_inferior ();
clear_proceed_status ();
- /* No traps are generated when attaching to inferior under Mach 3
- or GNU hurd. */
-#ifndef ATTACH_NO_WAIT
- /* Careful here. See comments in inferior.h. Basically some OSes
- don't ignore SIGSTOPs on continue requests anymore. We need a
- way for handle_inferior_event to reset the stop_signal variable
- after an attach, and this is what STOP_QUIETLY_NO_SIGSTOP is for. */
- stop_soon = STOP_QUIETLY_NO_SIGSTOP;
-
- if (target_can_async_p ())
+ if (non_stop)
{
- /* sync_execution mode. Wait for stop. */
- struct continuation_arg *arg1, *arg2, *arg3;
-
- arg1 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg2 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg3 =
- (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
- arg1->next = arg2;
- arg2->next = arg3;
- arg3->next = NULL;
- arg1->data.pointer = args;
- arg2->data.integer = from_tty;
- arg3->data.integer = async_exec;
- add_continuation (attach_command_continuation, arg1);
- return;
+ /* If we find that the current thread isn't stopped, explicitly
+ do so now, because we're going to install breakpoints and
+ poke at memory. */
+
+ if (async_exec)
+ /* The user requested an `attach&'; stop just one thread. */
+ target_stop (inferior_ptid);
+ else
+ /* The user requested an `attach', so stop all threads of this
+ inferior. */
+ target_stop (pid_to_ptid (ptid_get_pid (inferior_ptid)));
}
- wait_for_inferior (0);
-#endif
+ /* Some system don't generate traps when attaching to inferior.
+ E.g. Mach 3 or GNU hurd. */
+ if (!target_attach_no_wait)
+ {
+ struct inferior *inferior = current_inferior ();
+
+ /* Careful here. See comments in inferior.h. Basically some
+ OSes don't ignore SIGSTOPs on continue requests anymore. We
+ need a way for handle_inferior_event to reset the stop_signal
+ variable after an attach, and this is what
+ STOP_QUIETLY_NO_SIGSTOP is for. */
+ inferior->stop_soon = STOP_QUIETLY_NO_SIGSTOP;
+
+ if (target_can_async_p ())
+ {
+ /* sync_execution mode. Wait for stop. */
+ struct attach_command_continuation_args *a;
+
+ a = xmalloc (sizeof (*a));
+ a->args = xstrdup (args);
+ a->from_tty = from_tty;
+ a->async_exec = async_exec;
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
+ discard_cleanups (back_to);
+ return;
+ }
+
+ wait_for_inferior (0);
+ }
attach_command_post_wait (args, from_tty, async_exec);
+ discard_cleanups (back_to);
+}
+
+/* We had just found out that the target was already attached to an
+ inferior. PTID points at a thread of this new inferior, that is
+ the most likely to be stopped right now, but not necessarily so.
+ The new inferior is assumed to be already added to the inferior
+ list at this point. If LEAVE_RUNNING, then leave the threads of
+ this inferior running, except those we've explicitly seen reported
+ as stopped. */
+
+void
+notice_new_inferior (ptid_t ptid, int leave_running, int from_tty)
+{
+ struct cleanup* old_chain;
+ int async_exec;
+
+ old_chain = make_cleanup (null_cleanup, NULL);
+
+ /* If in non-stop, leave threads as running as they were. If
+ they're stopped for some reason other than us telling it to, the
+ target reports a signal != TARGET_SIGNAL_0. We don't try to
+ resume threads with such a stop signal. */
+ async_exec = non_stop;
+
+ if (!ptid_equal (inferior_ptid, null_ptid))
+ make_cleanup_restore_current_thread ();
+
+ switch_to_thread (ptid);
+
+ /* When we "notice" a new inferior we need to do all the things we
+ would normally do if we had just attached to it. */
+
+ if (is_executing (inferior_ptid))
+ {
+ struct inferior *inferior = current_inferior ();
+
+ /* We're going to install breakpoints, and poke at memory,
+ ensure that the inferior is stopped for a moment while we do
+ that. */
+ target_stop (inferior_ptid);
+
+ inferior->stop_soon = STOP_QUIETLY_REMOTE;
+
+ /* Wait for stop before proceeding. */
+ if (target_can_async_p ())
+ {
+ struct attach_command_continuation_args *a;
+
+ a = xmalloc (sizeof (*a));
+ a->args = xstrdup ("");
+ a->from_tty = from_tty;
+ a->async_exec = async_exec;
+ add_inferior_continuation (attach_command_continuation, a,
+ attach_command_continuation_free_args);
+
+ do_cleanups (old_chain);
+ return;
+ }
+ else
+ wait_for_inferior (0);
+ }
+
+ async_exec = leave_running;
+ attach_command_post_wait ("" /* args */, from_tty, async_exec);
+
+ do_cleanups (old_chain);
}
/*
* started via the normal ptrace (PTRACE_TRACEME).
*/
-static void
+void
detach_command (char *args, int from_tty)
{
dont_repeat (); /* Not for the faint of heart. */
+
+ if (ptid_equal (inferior_ptid, null_ptid))
+ error (_("The program is not being run."));
+
target_detach (args, from_tty);
- no_shared_libraries (NULL, from_tty);
- init_thread_list ();
+
+ /* If the solist is global across inferiors, don't clear it when we
+ detach from a single inferior. */
+ if (!gdbarch_has_global_solist (target_gdbarch))
+ no_shared_libraries (NULL, from_tty);
+
+ /* If we still have inferiors to debug, then don't mess with their
+ threads. */
+ if (!have_inferiors ())
+ init_thread_list ();
+
if (deprecated_detach_hook)
deprecated_detach_hook ();
}
deprecated_detach_hook ();
}
+void
+interrupt_target_1 (int all_threads)
+{
+ ptid_t ptid;
+ if (all_threads)
+ ptid = minus_one_ptid;
+ else
+ ptid = inferior_ptid;
+ target_stop (ptid);
+
+ /* Tag the thread as having been explicitly requested to stop, so
+ other parts of gdb know not to resume this thread automatically,
+ if it was stopped due to an internal event. Limit this to
+ non-stop mode, as when debugging a multi-threaded application in
+ all-stop mode, we will only get one stop event --- it's undefined
+ which thread will report the event. */
+ if (non_stop)
+ set_stop_requested (ptid, 1);
+}
+
/* Stop the execution of the target while running in async mode, in
- the backgound. */
+ the backgound. In all-stop, stop the whole process. In non-stop
+ mode, stop the current thread only by default, or stop all threads
+ if the `-a' switch is used. */
+
+/* interrupt [-a] */
void
interrupt_target_command (char *args, int from_tty)
{
if (target_can_async_p ())
{
+ int all_threads = 0;
+
dont_repeat (); /* Not for the faint of heart */
- target_stop ();
+
+ if (args != NULL
+ && strncmp (args, "-a", sizeof ("-a") - 1) == 0)
+ all_threads = 1;
+
+ if (!non_stop && all_threads)
+ error (_("-a is meaningless in all-stop mode."));
+
+ interrupt_target_1 (all_threads);
}
}
static void
-print_float_info (struct gdbarch *gdbarch, struct ui_file *file,
+print_float_info (struct ui_file *file,
struct frame_info *frame, const char *args)
{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+
if (gdbarch_print_float_info_p (gdbarch))
gdbarch_print_float_info (gdbarch, file, frame, args);
else
if (!target_has_registers)
error (_("The program has no registers now."));
- print_float_info (current_gdbarch, gdb_stdout,
- get_selected_frame (NULL), args);
+ print_float_info (gdb_stdout, get_selected_frame (NULL), args);
}
\f
static void
&showlist);
set_cmd_completer (c, noop_completer);
+ add_prefix_cmd ("kill", class_run, kill_command,
+ _("Kill execution of program being debugged."),
+ &killlist, "kill ", 0, &cmdlist);
+
add_com ("attach", class_run, attach_command, _("\
Attach to a process or file outside of GDB.\n\
This command attaches to another target, of the same type as your last\n\
if (xdb_commands)
add_com_alias ("g", "go", class_run, 1);
- add_com ("continue", class_run, continue_command, _("\
+ c = add_com ("continue", class_run, continue_command, _("\
Continue program being debugged, after signal or breakpoint.\n\
If proceeding from breakpoint, a number N may be used as an argument,\n\
which means to set the ignore count of that breakpoint to N - 1 (so that\n\
-the breakpoint won't break until the Nth time it is reached)."));
+the breakpoint won't break until the Nth time it is reached).\n\
+\n\
+If non-stop mode is enabled, continue only the current thread,\n\
+otherwise all the threads in the program are continued. To \n\
+continue all stopped threads in non-stop mode, use the -a option.\n\
+Specifying -a and an ignore count simultaneously is an error."));
add_com_alias ("c", "cont", class_run, 1);
add_com_alias ("fg", "cont", class_run, 1);
set_cmd_completer (c, filename_completer);
c = add_com ("interrupt", class_run, interrupt_target_command,
- _("Interrupt the execution of the debugged program."));
- set_cmd_async_ok (c);
+ _("Interrupt the execution of the debugged program.\n\
+If non-stop mode is enabled, interrupt only the current thread,\n\
+otherwise all the threads in the program are stopped. To \n\
+interrupt all running threads in non-stop mode, use the -a option."));
add_info ("registers", nofp_registers_info, _("\
List of integer registers and their contents, for selected stack frame.\n\
projects / thirdparty / binutils-gdb.git / blobdiff