-# Copyright (C) 1998 Free Software Foundation, Inc.
+# Copyright 1998, 2005, 2007, 2008, 2009, 2010, 2011
+# Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Michael Snyder (msnyder@cygnus.com)
strace $tracelevel
}
-set prms_id 0
-set bug_id 0
gdb_exit
gdb_start
-if [istarget "m68k-*-elf"] then {
- load_lib "emc-support.exp";
- set srcfile gdb_c_test.c
- set binfile [board_info target d490_binfile];
- gdb_test "set remotetimeout 6" "" ""
- set timeout 500
- gdb_target_monitor $binfile
- # Give a TSTOP and ignore errors, to make sure any previous trace is off
- gdb_test "tstop" "" ""
- gdb_test "tfind none" "" ""
- send_gdb "compare-sections CS\n"
- gdb_expect {
- -re "MIS-MATCHED.*$gdb_prompt $" {
- gdb_suppress_entire_file "Symbol file does not match target!
- all tests in this module will fail.";
- }
- -re ".*$gdb_prompt $" { }
- }
-} else {
- set testfile "actions"
- set srcfile ${testfile}.c
- set binfile $objdir/$subdir/$testfile
- if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
- executable {debug additional_flags=-w}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
- }
- gdb_load $binfile
- gdb_test "tstop" "" ""
- gdb_test "tfind none" "" ""
- runto_main
+set testfile "actions"
+set srcfile ${testfile}.c
+set binfile $objdir/$subdir/passc-dyn
+if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+ executable {debug nowarnings}] != "" } {
+ untested passc-dyn.exp
+ return -1
}
+gdb_load $binfile
+gdb_test "tstop" ".*" ""
+gdb_test "tfind none" ".*" ""
+runto_main
gdb_reinitialize_dir $srcdir/$subdir
# We generously give ourselves one "pass" if we successfully
# detect that this test cannot be run on this target!
if { ![gdb_target_supports_trace] } then {
- pass "Current target does not supporst trace"
+ pass "Current target does not support trace"
return 1;
}
gdb_test "passcount 3 $tdp4" "Setting tracepoint $tdp4's passcount to 3" \
"4.5: set passcount for tracepoint $tdp4"
-gdb_test "tstart" "" ""
-
-if [istarget "m68k-*-elf"] then {
- gdb_emclaptop_command "85,1,2,3,4,5,6"
- sleep 5
- gdb_emclaptop_command "85,7,8,9,A,B,C"
- sleep 5
- gdb_emclaptop_command "85,D,E,F,10,11,12"
- sleep 5
- # gdb_test "tstop"
- ##
- ## Note! Must NOT give the tstop command, because the passcount
- ## has already stopped the experiment. You would not
- ## think this would be an error, but in EMC's mind it is...
- ##
-} else {
- gdb_test "break end" "" ""
- gdb_test "continue" \
- "Continuing.*Breakpoint $decimal, end.*" \
- "run trace experiment"
- gdb_test "tstop" "" ""
-}
+gdb_test "tstart" ".*" ""
+
+gdb_test "break end" ".*" ""
+gdb_test "continue" \
+ "Continuing.*Breakpoint $decimal, end.*" \
+ "run trace experiment"
+gdb_test "tstop" ".*" ""
-gdb_test "tfind none" "" ""
+gdb_test "tfind none" ".*" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x -1 x" ""] {
- gdb_suppress_entire_file "0: tfind none failed"
+ untested passc-dyn.exp
+ return -1
}
-gdb_test "tfind tracepoint $tdp2" "" ""
+gdb_test "tfind tracepoint $tdp2" ".*" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 0 x" ""] {
- gdb_suppress_entire_file "1: first tfind failed"
+ untested passc-dyn.exp
+ return -1
}
-gdb_test "tfind tracepoint $tdp3" "" ""
+gdb_test "tfind tracepoint $tdp3" ".*" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 1 x" ""] {
- gdb_suppress_entire_file "2: second tfind failed"
+ untested passc-dyn.exp
+ return -1
}
-gdb_test "tfind tracepoint $tdp4" "" ""
+gdb_test "tfind tracepoint $tdp4" ".*" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 2 x" ""] {
- gdb_suppress_entire_file "3: third tfind failed"
+ untested passc-dyn.exp
+ return -1
}
-gdb_test "tfind tracepoint $tdp2" "" ""
+gdb_test "tfind tracepoint $tdp2" ".*" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 3 x" ""] {
- gdb_suppress_entire_file "4: fourth tfind failed"
+ untested passc-dyn.exp
+ return -1
}
-gdb_test "tfind tracepoint $tdp3" "" ""
+gdb_test "tfind tracepoint $tdp3" ".*" ""
if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 4 x" ""] {
- gdb_suppress_entire_file "5: fifth tfind failed"
+ untested passc-dyn.exp
+ return -1
}
## We should now be at the last frame, because this frame's passcount
gdb_test "tfind" "failed to find.*" "4.5: dynamic passcount test"
# Finished!
-gdb_test "tfind none" "" ""
+gdb_test "tfind none" ".*" ""
projects / thirdparty / binutils-gdb.git / blobdiff