#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.64.
+# Generated by GNU Autoconf 2.69.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
-# Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
else
exitcode=1; echo positional parameters were not saved.
fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
fi
if test x$as_have_required = xno; then :
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
fi # as_fn_arith
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
- $as_echo "$as_me: error: $1" >&2
+ $as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
SHELL=${CONFIG_SHELL-/bin/sh}
-exec 7<&0 </dev/null 6>&1
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
# include <unistd.h>
#endif"
+ac_header_list=
+ac_func_list=
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_float
+sim_bitsize
cgen_breaks
sim_trapdump
cgen
REPORT_BUGS_TEXI
REPORT_BUGS_TO
PKGVERSION
-sim_profile
-sim_trace
-sim_stdio
-sim_debug
-sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
LIBINTL_DEP
LIBINTL
USE_NLS
-GMAKE_FALSE
-GMAKE_TRUE
-MAKE
CCDEPMODE
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
-HDEFINES
+LDFLAGS_FOR_BUILD
+CFLAGS_FOR_BUILD
CC_FOR_BUILD
INSTALL_DATA
INSTALL_SCRIPT
EGREP
GREP
CPP
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
target_os
target_vendor
target_cpu
build_vendor
build_cpu
build
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-WERROR_CFLAGS
-WARN_CFLAGS
-sim_xor_endian
-sim_stdcall
-sim_smp
-sim_reserved_bits
-sim_regparm
-sim_packages
-sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
-sim_endian
-sim_bitsize
-sim_assert
-sim_alignment
-sim_environment
target_alias
host_alias
build_alias
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
-SHELL'
+SHELL
+WERROR_CFLAGS
+WARN_CFLAGS
+sim_scache
+sim_inline
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_endian
+sim_default_model
+sim_alignment'
ac_subst_files=''
ac_user_opts='
enable_option_checking
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
-enable_sim_cflags
enable_sim_debug
enable_sim_stdio
enable_sim_trace
enable_sim_profile
+enable_sim_assert
+enable_sim_environment
+enable_sim_inline
with_pkgversion
with_bugurl
enable_sim_endian
enable_sim_alignment
enable_sim_scache
enable_sim_default_model
-enable_sim_environment
+enable_werror
+enable_build_warnings
+enable_sim_build_warnings
enable_cgen_maint
enable_sim_trapdump
enable_sim_hardware
fi
case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) as_fn_error "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information."
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
;;
*=*)
# Reject names that are not valid shell variable names.
case $ac_envvar in #(
'' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
$as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
$as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
;;
esac
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error "missing argument to $ac_option"
+ as_fn_error $? "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error "working directory cannot be determined"
+ as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error "pwd does not report name of working directory"
+ as_fn_error $? "pwd does not report name of working directory"
# Find the source files, if location was not specified.
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
+ -q, --quiet, --silent do not print \`checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
- --enable-sim-cflags=opts
- Extra CFLAGS for use in building simulator
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
itself)
--enable-sim-stdio Specify whether to use stdio for console
--enable-sim-trace=opts Enable tracing of simulated programs
--enable-sim-profile=opts
Enable profiling flags
+ --enable-sim-assert Specify whether to perform random assertions
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
+ --enable-sim-inline=inlines
+ Specify which functions should be inlined
--enable-sim-endian=endian
Specify target byte endian orientation
--enable-sim-alignment=align
Specify simulator execution cache size
--enable-sim-default-model=model
Specify default model to simulate
- --enable-sim-environment=environment
- Specify mixed, user, virtual or operating
- environment
+ --enable-werror treat compile warnings as errors
+ --enable-build-warnings enable build-time compiler warnings if gcc is used
+ --enable-sim-build-warnings
+ enable SIM specific build-time compiler warnings if
+ gcc is used
--enable-cgen-maint=DIR build cgen generated files
--enable-sim-trapdump Make unknown traps dump the registers
--enable-sim-hardware=LIST
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
if $ac_init_version; then
cat <<\_ACEOF
configure
-generated by GNU Autoconf 2.64
+generated by GNU Autoconf 2.69
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
ac_retval=1
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- return $ac_retval
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
} # ac_fn_c_try_compile
mv -f conftest.er1 conftest.err
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } >/dev/null && {
+ test $ac_status = 0; } > conftest.i && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then :
ac_retval=1
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- return $ac_retval
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
} # ac_fn_c_try_cpp
ac_fn_c_check_header_mongrel ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ if eval \${$3+:} false; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
fi
eval ac_res=\$$3
else
ac_header_preproc=no
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
$as_echo "$ac_header_preproc" >&6; }
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
eval "$3=\$ac_header_compiler"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_mongrel
ac_retval=$ac_status
fi
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- return $ac_retval
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
} # ac_fn_c_try_run
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_compile
test ! -s conftest.err
} && test -s conftest$ac_exeext && {
test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
+ test -x conftest$ac_exeext
}; then :
ac_retval=0
else
# interfere with the next link command; also delete a directory that is
# left behind by Apple's compiler. We do this before executing the actions.
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- return $ac_retval
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
} # ac_fn_c_try_link
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_func
+
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if eval \${$4+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$4=yes"
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$4=yes"
+else
+ eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_member
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
-generated by GNU Autoconf 2.64. Invocation command line was
+generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
{
echo
- cat <<\_ASBOX
-## ---------------- ##
+ $as_echo "## ---------------- ##
## Cache variables. ##
-## ---------------- ##
-_ASBOX
+## ---------------- ##"
echo
# The following way of writing the cache mishandles newlines in values,
(
)
echo
- cat <<\_ASBOX
-## ----------------- ##
+ $as_echo "## ----------------- ##
## Output variables. ##
-## ----------------- ##
-_ASBOX
+## ----------------- ##"
echo
for ac_var in $ac_subst_vars
do
echo
if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
+ $as_echo "## ------------------- ##
## File substitutions. ##
-## ------------------- ##
-_ASBOX
+## ------------------- ##"
echo
for ac_var in $ac_subst_files
do
fi
if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
+ $as_echo "## ----------- ##
## confdefs.h. ##
-## ----------- ##
-_ASBOX
+## ----------- ##"
echo
cat confdefs.h
echo
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
- ac_site_file1=$CONFIG_SITE
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
elif test "x$prefix" != xNONE; then
ac_site_file1=$prefix/share/config.site
ac_site_file2=$prefix/etc/config.site
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
- if test -r "$ac_site_file"; then
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
fi
done
if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
>$cache_file
fi
+as_fn_append ac_header_list " dlfcn.h"
+as_fn_append ac_header_list " fcntl.h"
+as_fn_append ac_header_list " fpu_control.h"
+as_fn_append ac_header_list " unistd.h"
+as_fn_append ac_header_list " sys/mman.h"
+as_fn_append ac_header_list " sys/resource.h"
+as_fn_append ac_header_list " sys/time.h"
+as_fn_append ac_header_list " sys/times.h"
+as_fn_append ac_header_list " sys/stat.h"
+as_fn_append ac_func_list " __setfpucw"
+as_fn_append ac_func_list " ftruncate"
+as_fn_append ac_func_list " getrusage"
+as_fn_append ac_func_list " lstat"
+as_fn_append ac_func_list " mmap"
+as_fn_append ac_func_list " munmap"
+as_fn_append ac_func_list " posix_fallocate"
+as_fn_append ac_func_list " sigaction"
+as_fn_append ac_func_list " time"
+as_fn_append ac_func_list " truncate"
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-# This file contains common code used by all simulators.
-#
-# SIM_AC_COMMON invokes AC macros used by all simulators and by the common
-# directory. It is intended to be invoked before any target specific stuff.
-# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
-# It is intended to be invoked last.
-#
-# The simulator's configure.ac should look like:
-#
-# dnl Process this file with autoconf to produce a configure script.
-# AC_PREREQ(2.64)dnl
-# AC_INIT(Makefile.in)
-# sinclude(../common/aclocal.m4)
-#
-# SIM_AC_COMMON
-#
-# ... target specific stuff ...
-#
-# SIM_AC_OUTPUT
-
-# Include global overrides and fixes for Autoconf.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# _AC_CHECK_DECL_BODY
-# -------------------
-# Shell function body for AC_CHECK_DECL.
-# _AC_CHECK_DECL_BODY
-
-# _AC_CHECK_DECLS(SYMBOL, ACTION-IF_FOUND, ACTION-IF-NOT-FOUND,
-# INCLUDES)
-# -------------------------------------------------------------
-# Helper to AC_CHECK_DECLS, which generates the check for a single
-# SYMBOL with INCLUDES, performs the AC_DEFINE, then expands
-# ACTION-IF-FOUND or ACTION-IF-NOT-FOUND.
-
-
-
-
-
-
-
-
-
-
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-
-
-# serial 56 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-# LT_INIT
-
-# Old names:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-# _LT_SETUP
-
-
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-# _LT_PROG_LTMAIN
-
-
-## ------------------------------------- ##
-## Accumulate code for creating libtool. ##
-## ------------------------------------- ##
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-
-
-# Initialize.
-
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-
-
-# Initialize.
-
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-
-
-
-
-## ------------------------ ##
-## FIXME: Eliminate VARNAME ##
-## ------------------------ ##
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME. Any other value will be used directly.
-
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-
-
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-
-
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
-# must have a single quote delimited value for this to work.
-
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly. In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
-
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-# # Some comment about what VAR is for.
-# visible_name=$lt_internal_name
-
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-
-
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable. If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins. After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script. The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-# _LT_GENERATED_FILE_INIT
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars. Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-# autoconf --trace 'LT_SUPPORTED_TAG:$1'
-
-
-
-# C support is built-in for now
-
-
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-# _LT_LANG
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_TAG_COMPILER
-# ----------------
-# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-
-
-
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
-# Checks for linker and compiler features on darwin
-
-
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-# _LT_SHELL_INIT
-
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
-# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_ENABLE_LOCK
-# ---------------
-# _LT_ENABLE_LOCK
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-# _LT_COMPILER_OPTION
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-# _LT_LINKER_OPTION
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# LT_CMD_MAX_LEN
-#---------------
-# LT_CMD_MAX_LEN
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-# LT_SYS_DLOPEN_SELF
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-# _LT_SYS_DYNAMIC_LINKER
-
-
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-# _LT_PATH_MAGIC
-
-
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-# LT_PATH_LD
-
-# Old names:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_PATH_LD_GNU
-#- --------------
-# _LT_PATH_LD_GNU
-
-
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-# _LT_CMD_RELOAD
-
-
-# _LT_CHECK_MAGIC_METHOD
-# ----------------------
-# how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-# _LT_CHECK_MAGIC_METHOD
-
-
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-# LT_PATH_NM
-
-# Old names:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# LT_LIB_M
-# --------
-# check for math library
-# LT_LIB_M
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
- # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-# _LT_COMPILER_PIC
-
-
-# _LT_LINKER_SHLIBS([TAGNAME])
-# ----------------------------
-# See if the linker supports building shared libraries.
-# _LT_LINKER_SHLIBS
-
-
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-# _LT_LANG_C_CONFIG
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-# _LT_LANG_CXX_CONFIG
-
-
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-# _LT_LANG_F77_CONFIG
-
-
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-# _LT_LANG_FC_CONFIG
-
-
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-# _LT_LANG_GCJ_CONFIG
-
-
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-# _LT_LANG_RC_CONFIG
-
-
-# LT_PROG_GCJ
-# -----------
-
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# LT_PROG_RC
-# ----------
-
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-
-
-
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-
-
-
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-# _LT_DECL_SED
-
-#m4_ifndef
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-# _LT_CHECK_SHELL_FEATURES
-
-
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-
-
-# Helper functions for option handling. -*- Autoconf -*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltoptions.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-
-
-
-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
-# ------------------------------------------
-
-
-
-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
-# ---------------------------------------
-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
-# matching handler defined, dispatch to it. Other OPTION-NAMEs are
-# saved as a flag.
-
-
-
-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
-# ------------------------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-
-
-
-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
-# -------------------------------------------------------
-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
-# are set.
-
-
-
-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
-# ----------------------------------------
-# OPTION-LIST is a space-separated list of Libtool options associated
-# with MACRO-NAME. If any OPTION has a matching handler declared with
-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
-# the unknown option and exit.
-# _LT_SET_OPTIONS
-
-
-## --------------------------------- ##
-## Macros to handle LT_INIT options. ##
-## --------------------------------- ##
-
-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
-# -----------------------------------------
-
-
-
-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
-# -----------------------------------------------
-# LT_OPTION_DEFINE
-
-
-# dlopen
-# ------
-
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-# win32-dll
-# ---------
-# Declare package support for building win32 dll's.
-# win32-dll
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-# _LT_ENABLE_SHARED([DEFAULT])
-# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-# _LT_ENABLE_SHARED
-
-
-
-
-# Old names:
-
-
-
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-
-# _LT_ENABLE_STATIC([DEFAULT])
-# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-# _LT_ENABLE_STATIC
-
-
-
-
-# Old names:
-
-
-
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-
-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
-# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-# _LT_ENABLE_FAST_INSTALL
-
-
-
-
-# Old names:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-
-# _LT_WITH_PIC([MODE])
-# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
-# LT_INIT options.
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-# _LT_WITH_PIC
-
-
-
-
-# Old name:
-# This is what autoupdate's m4 run will expand. It fires
-# the warning (with _au_warn_XXX), outputs it into the
-# updated configure.ac (with AC_DIAGNOSE), and then outputs
-# the replacement expansion.
-
-
-# This is an auxiliary macro that is also run when
-# autoupdate runs m4. It simply calls m4_warning, but
-# we need a wrapper so that each warning is emitted only
-# once. We break the quoting in m4_warning's argument in
-# order to expand this macro's arguments, not AU_DEFUN's.
-
-
-# Finally, this is the expansion that is picked up by
-# autoconf. It tells the user to run autoupdate, and
-# then outputs the replacement expansion. We do not care
-# about autoupdate's warning because that contains
-# information on what to do *after* running autoupdate.
-
-
-
-## ----------------- ##
-## LTDL_INIT Options ##
-## ----------------- ##
-
-
-
-
-
-
-
-
-
-
-# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltsugar.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-
-
-
-# lt_join(SEP, ARG1, [ARG2...])
-# -----------------------------
-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
-# associated separator.
-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
-# versions in m4sugar had bugs.
-
-
-
-
-# lt_car(LIST)
-# lt_cdr(LIST)
-# ------------
-# Manipulate m4 lists.
-# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
-
-
-
-
-
-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
-# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
-# Note that neither SEPARATOR nor STRING are expanded; they are appended
-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
-# than defined and empty).
-#
-# This macro is needed until we can rely on Autoconf 2.62, since earlier
-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
-
-
-
-
-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
-# ----------------------------------------------------------
-# Produce a SEP delimited list of all paired combinations of elements of
-# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
-# has the form PREFIXmINFIXSUFFIXn.
-# Needed until we can rely on m4_combine added in Autoconf 2.62.
-
-
-
-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
-# -----------------------------------------------------------------------
-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
-
-
-
-# lt_dict_add(DICT, KEY, VALUE)
-# -----------------------------
-
-
-
-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
-# --------------------------------------------
-
-
-
-# lt_dict_fetch(DICT, KEY, [SUBKEY])
-# ----------------------------------
-
-
-
-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
-# -----------------------------------------------------------------
-
-
-
-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
-# --------------------------------------------------------------
-
-
-# ltversion.m4 -- version numbers -*- Autoconf -*-
-#
-# Copyright (C) 2004 Free Software Foundation, Inc.
-# Written by Scott James Remnant, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# Generated from ltversion.in.
-
-# serial 3134 ltversion.m4
-# This file is part of GNU Libtool
-
-
-
-
-
-
-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
-# Written by Scott James Remnant, 2004.
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 4 lt~obsolete.m4
-
-# These exist entirely to fool aclocal when bootstrapping libtool.
-#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
-# which have later been changed to m4_define as they aren't part of the
-# exported API, or moved to Autoconf or Automake where they belong.
-#
-# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
-# using a macro with the same name in our local m4/libtool.m4 it'll
-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
-# and doesn't know about Autoconf macros at all.)
-#
-# So we provide this file, which has a silly filename so it's always
-# included after everything else. This provides aclocal with the
-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
-# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
-#
-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
-# Yes, that means every name once taken will need to remain here until
-# we give up compatibility with versions before 1.7, at which point
-# we need to keep only those names which we still refer to.
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-## -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# Based on depend.m4 from automake 1.9, modified for standalone use in
-# an environment where GNU make is required.
-
-# ZW_PROG_COMPILER_DEPENDENCIES
-# -----------------------------
-# Variant of _AM_DEPENDENCIES which just does the dependency probe and
-# sets fooDEPMODE accordingly. Cache-variable compatible with
-# original; not side-effect compatible. As the users of this macro
-# may require accurate dependencies for correct builds, it does *not*
-# honor --disable-dependency-checking, and failure to detect a usable
-# method is an error. depcomp is assumed to be located in
-# $ac_aux_dir.
-#
-# FIXME: Should use the Autoconf 2.5x language-selection mechanism.
-
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-
-
-# ZW_CREATE_DEPDIR
-# ----------------
-# As AM_SET_DEPDIR, but also create the directory at config.status time.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-sim_inline="-DDEFAULT_INLINE=0"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# intl sister-directory configuration rules.
-#
-
-# The idea behind this macro is that there's no need to repeat all the
-# autoconf probes done by the intl directory - it's already done them
-# for us. In fact, there's no need even to look at the cache for the
-# answers. All we need to do is nab a few pieces of information.
-# The intl directory is set up to make this easy, by generating a
-# small file which can be sourced as a shell script; then we produce
-# the necessary substitutions and definitions for this directory.
-
-
-
-# Autoconf M4 include file defining utility macros for complex Canadian
-# cross builds.
-
-
-
-
-
-
-
-
-
-####
-# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
-# or AC_INIT.
-# These demand that AC_CANONICAL_SYSTEM be called beforehand.
-
-####
-# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
-# Like plain AC_CHECK_TOOLS, but require prefix if build!=host.
-
-
-####
-# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
-# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target.
-
-
-
-# Backported from Autoconf 2.5x; can go away when and if
-# we switch. Put the OS path separator in $PATH_SEPARATOR.
-
-
-
-
-# ACX_HAVE_GCC_FOR_TARGET
-# Check if the variable GCC_FOR_TARGET really points to a GCC binary.
-
-
-# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG)
-# Searching for installed target binutils. We need to take extra care,
-# else we may find the wrong assembler, linker, etc., and lose.
-#
-# First try --with-build-time-tools, if specified.
-#
-# For build != host, we ask the installed GCC for the name of the tool it
-# uses, and accept it if it is an absolute path. This is because the
-# only good choice for a compiler is the same GCC version that is being
-# installed (or we couldn't make target libraries), and we assume that
-# on the host system we'll have not only the same GCC version, but also
-# the same binutils version.
-#
-# For build == host, search the same directories that the installed
-# compiler will search. We used to do this for the assembler, linker,
-# and nm only; for simplicity of configuration, however, we extend this
-# criterion to tools (such as ar and ranlib) that are never invoked by
-# the compiler, to avoid mismatches.
-#
-# Also note we have to check MD_EXEC_PREFIX before checking the user's path
-# if build == target. This makes the most sense only when bootstrapping,
-# but we also do so when build != host. In this case, we hope that the
-# build and host systems will have similar contents of MD_EXEC_PREFIX.
-#
-# If we do not find a suitable binary, then try the user's path.
-
-
-###
-# AC_PROG_CPP_WERROR
-# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
-# triggers warnings from the preprocessor. Will be in autoconf 2.58.
-# For now, using this also overrides header checks to use only the
-# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
-# bit harder from here).
-# Eventually autoconf will default to checking headers with the compiler
-# instead, and we'll have to do this differently.
-
-# AC_PROG_CPP_WERROR
-
-# Test for GNAT.
-# We require the gnatbind & gnatmake programs, as well as a compiler driver
-# that understands Ada. We use the user's CC setting, already found, and
-# possibly add $1 to the command-line parameters.
-#
-# Sets the shell variable have_gnat to yes or no as appropriate, and
-# substitutes GNATBIND and GNATMAKE.
-
-
-
-
-
-
-
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if ${ac_cv_target+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$target_alias" = x; then
+ ac_cv_target=$ac_cv_host
+else
+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ${ac_tool_prefix}cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "no acceptable C compiler found in \$PATH
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
... rest of stderr output deleted ...
10q' conftest.err >conftest.er1
cat conftest.er1 >&5
- rm -f conftest.er1 conftest.err
fi
+ rm -f conftest.er1 conftest.err
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
done
}
_ACEOF
ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
# The possible output files:
else
ac_file=''
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
if test -z "$ac_file"; then :
- $as_echo "$as_me: failed program was:" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "C compiler cannot create executables
-See \`config.log' for more details." "$LINENO" 5; }; }
-fi
-ac_exeext=$ac_cv_exeext
-
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
$as_echo_n "checking for suffix of executables... " >&6; }
if { { ac_try="$ac_link"
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
fi
-rm -f conftest$ac_cv_exeext
+rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
$as_echo "$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then :
+if ${ac_cv_objext+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
ac_objext=$OBJEXT
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+if ${ac_cv_c_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
ac_save_CFLAGS=$CFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then :
+if ${ac_cv_prog_cc_g+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_save_c_werror_flag=$ac_c_werror_flag
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
+if ${ac_cv_prog_cc_c89+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c89=no
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- for ac_t in install-sh install.sh shtool; do
- if test -f "$ac_dir/$ac_t"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/$ac_t -c"
- break 2
- fi
- done
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if test "${ac_cv_target+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$target_alias" = x; then
- ac_cv_target=$ac_cv_host
-else
- ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
- as_fn_error "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error "invalid value of canonical target" "$LINENO" 5;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
CPP=
fi
if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then :
+ if ${ac_cv_prog_CPP+:} false; then :
$as_echo_n "(cached) " >&6
else
# Double quotes because CPP needs to be expanded
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
break
fi
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
fi
ac_ext=c
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
+if ${ac_cv_path_GREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$GREP"; then
for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+ as_fn_executable_p "$ac_path_GREP" || continue
# Check for GNU ac_path_GREP and select it if it is found.
# Check for GNU $ac_path_GREP
case `"$ac_path_GREP" --version 2>&1` in
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_GREP"; then
- as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_GREP=$GREP
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then :
+if ${ac_cv_path_EGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+ as_fn_executable_p "$ac_path_EGREP" || continue
# Check for GNU ac_path_EGREP and select it if it is found.
# Check for GNU $ac_path_EGREP
case `"$ac_path_EGREP" --version 2>&1` in
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_EGREP"; then
- as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_EGREP=$EGREP
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
$as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
-if test "x$ac_cv_header_minix_config_h" = x""yes; then :
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
MINIX=yes
else
MINIX=
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
-if test "${ac_cv_safe_to_define___extensions__+set}" = set; then :
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-# define __EXTENSIONS__ 1
- $ac_includes_default
+# define __EXTENSIONS__ 1
+ $ac_includes_default
int
main ()
{
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then :
+if ${ac_cv_path_install+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
rmdir .tst 2>/dev/null
DEPDIR="${am__leading_dot}deps"
+
+
+
+
+ for ac_header in $ac_header_list
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ for ac_func in $ac_func_list
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
case `pwd` in
*\ * | *\ *)
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then :
+if ${ac_cv_path_SED+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+ as_fn_executable_p "$ac_path_SED" || continue
# Check for GNU ac_path_SED and select it if it is found.
# Check for GNU $ac_path_SED
case `"$ac_path_SED" --version 2>&1` in
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_SED"; then
- as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
fi
else
ac_cv_path_SED=$SED
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then :
+if ${ac_cv_path_FGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
for ac_prog in fgrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+ as_fn_executable_p "$ac_path_FGREP" || continue
# Check for GNU ac_path_FGREP and select it if it is found.
# Check for GNU $ac_path_FGREP
case `"$ac_path_FGREP" --version 2>&1` in
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_FGREP"; then
- as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_FGREP=$FGREP
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
-if test "${lt_cv_path_LD+set}" = set; then :
+if ${lt_cv_path_LD+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+if ${lt_cv_prog_gnu_ld+:} false; then :
$as_echo_n "(cached) " >&6
else
# I'd rather use --version here, but apparently some GNU lds only accept -v.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then :
+if ${lt_cv_path_NM+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$NM"; then
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_DUMPBIN+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$DUMPBIN"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_DUMPBIN"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
$as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if test "${lt_cv_nm_interface+set}" = set; then :
+if ${lt_cv_nm_interface+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_nm_interface="BSD nm"
# find the maximum length of command line arguments
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+if ${lt_cv_sys_max_cmd_len+:} false; then :
$as_echo_n "(cached) " >&6
else
i=0
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then :
+if ${lt_cv_ld_reload_flag+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ld_reload_flag='-r'
set dummy ${ac_tool_prefix}objdump; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OBJDUMP"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy objdump; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OBJDUMP"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_OBJDUMP="objdump"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then :
+if ${lt_cv_deplibs_check_method+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_file_magic_cmd='$MAGIC_CMD'
+plugin_option=
+plugin_names="liblto_plugin.so liblto_plugin-0.dll cyglto_plugin-0.dll"
+for plugin in $plugin_names; do
+ plugin_so=`${CC} ${CFLAGS} --print-prog-name $plugin`
+ if test x$plugin_so = x$plugin; then
+ plugin_so=`${CC} ${CFLAGS} --print-file-name $plugin`
+ fi
+ if test x$plugin_so != x$plugin; then
+ plugin_option="--plugin $plugin_so"
+ break
+ fi
+done
+
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then :
+if ${ac_cv_prog_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AR"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AR="${ac_tool_prefix}ar"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_AR"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_AR="ar"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
test -z "$AR" && AR=ar
+if test -n "$plugin_option"; then
+ if $AR --help 2>&1 | grep -q "\--plugin"; then
+ touch conftest.c
+ $AR $plugin_option rc conftest.a conftest.c
+ if test "$?" != 0; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Failed: $AR $plugin_option rc" >&5
+$as_echo "$as_me: WARNING: Failed: $AR $plugin_option rc" >&2;}
+ else
+ AR="$AR $plugin_option"
+ fi
+ rm -f conftest.*
+ fi
+fi
test -z "$AR_FLAGS" && AR_FLAGS=cru
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
+if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then :
+if ${ac_cv_prog_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$RANLIB"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_RANLIB"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
test -z "$RANLIB" && RANLIB=:
+if test -n "$plugin_option" && test "$RANLIB" != ":"; then
+ if $RANLIB --help 2>&1 | grep -q "\--plugin"; then
+ RANLIB="$RANLIB $plugin_option"
+ fi
+fi
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
+if ${ac_cv_prog_AWK+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AWK="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
# Check for command to grab the raw symbol name followed by C symbol from nm.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
$as_echo_n "(cached) " >&6
else
CFLAGS="$CFLAGS -belf"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then :
+if ${lt_cv_cc_needs_belf+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_ext=c
set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$DSYMUTIL"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy dsymutil; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_DSYMUTIL"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ${ac_tool_prefix}nmedit; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_NMEDIT+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$NMEDIT"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy nmedit; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_NMEDIT"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_NMEDIT="nmedit"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ${ac_tool_prefix}lipo; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO+set}" = set; then :
+if ${ac_cv_prog_LIPO+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$LIPO"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy lipo; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_LIPO"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_LIPO="lipo"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ${ac_tool_prefix}otool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL+set}" = set; then :
+if ${ac_cv_prog_OTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OTOOL"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy otool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OTOOL"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_OTOOL="otool"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ${ac_tool_prefix}otool64; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_OTOOL64+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OTOOL64"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy otool64; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OTOOL64"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_OTOOL64="otool64"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
$as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+if ${lt_cv_apple_cc_single_mod+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_apple_cc_single_mod=no
$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ld_exported_symbols_list=no
$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
$as_echo_n "checking for -force_load linker flag... " >&6; }
-if test "${lt_cv_ld_force_load+set}" = set; then :
+if ${lt_cv_ld_force_load+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ld_force_load=no
do :
ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
"
-if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_DLFCN_H 1
_ACEOF
-# autoconf.info says this should be called right after AC_INIT.
-ac_config_headers="$ac_config_headers config.h:config.in"
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
-if test "${ac_cv_c_bigendian+set}" = set; then :
+if ${ac_cv_c_bigendian+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_c_bigendian=unknown
;; #(
*)
- as_fn_error "unknown endianness
+ as_fn_error $? "unknown endianness
presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
esac
-# Put a plausible default for CC_FOR_BUILD in Makefile.
if test "x$cross_compiling" = "xno"; then
- CC_FOR_BUILD='$(CC)'
+ : "${CC_FOR_BUILD:=\$(CC)}"
+ : "${CFLAGS_FOR_BUILD:=\$(CFLAGS)}"
+ : "${LDFLAGS_FOR_BUILD:=\$(LDFLAGS)}"
+else
+ : "${CC_FOR_BUILD:=gcc}"
+ : "${CFLAGS_FOR_BUILD:=-g -O}"
+ : "${LDLFAGS_FOR_BUILD:=}"
+fi
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
else
- CC_FOR_BUILD=gcc
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-AR=${AR-ar}
+ if test "x$ac_ct_AR" = x; then
+ AR=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then :
+if ${ac_cv_prog_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$RANLIB"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_RANLIB"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+ac_config_headers="$ac_config_headers config.h:config.in"
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
am_depcomp=$ac_aux_dir/depcomp
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -f "$am_depcomp"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
if test x${am_cv_CC_dependencies_compiler_type-none} = xnone
-then as_fn_error "no usable dependency style found" "$LINENO" 5
+then as_fn_error $? "no usable dependency style found" "$LINENO" 5
else CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
fi
-# Check for the 'make' the user wants to use.
-for ac_prog in make
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_MAKE+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MAKE"; then
- ac_cv_prog_MAKE="$MAKE" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_MAKE="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-MAKE=$ac_cv_prog_MAKE
-if test -n "$MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAKE" >&5
-$as_echo "$MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MAKE" && break
-done
-
-MAKE_IS_GNU=
-case "`$MAKE --version 2>&1 | sed 1q`" in
- *GNU*)
- MAKE_IS_GNU=yes
- ;;
-esac
- if test "$MAKE_IS_GNU" = yes; then
- GMAKE_TRUE=
- GMAKE_FALSE='#'
-else
- GMAKE_TRUE='#'
- GMAKE_FALSE=
-fi
-
-
ALL_LINGUAS=
# If we haven't got the data from the intl directory,
# assume NLS is disabled.
$as_echo "$LINGUAS" >&6; }
- DATADIRNAME=share
+ DATADIRNAME=share
+
+ INSTOBJEXT=.mo
+
+ GENCAT=gencat
+
+ CATOBJEXT=.gmo
+
+fi
+
+# Check for common headers.
+# NB: You can assume C11 headers exist.
+
+
+ac_fn_c_check_member "$LINENO" "struct stat" "st_dev" "ac_cv_member_struct_stat_st_dev" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_dev" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_DEV 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_ino" "ac_cv_member_struct_stat_st_ino" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_ino" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_INO 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_mode" "ac_cv_member_struct_stat_st_mode" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_mode" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_MODE 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_nlink" "ac_cv_member_struct_stat_st_nlink" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_nlink" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_NLINK 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_uid" "ac_cv_member_struct_stat_st_uid" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_uid" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_UID 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_gid" "ac_cv_member_struct_stat_st_gid" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_gid" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_GID 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_rdev" "ac_cv_member_struct_stat_st_rdev" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_rdev" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_RDEV 1
+_ACEOF
+
- INSTOBJEXT=.mo
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_size" "ac_cv_member_struct_stat_st_size" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_size" = xyes; then :
- GENCAT=gencat
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_SIZE 1
+_ACEOF
- CATOBJEXT=.gmo
fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_blksize" "ac_cv_member_struct_stat_st_blksize" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_blksize" = xyes; then :
-# Check for common headers.
-# FIXME: Seems to me this can cause problems for i386-windows hosts.
-# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
-for ac_header in stdlib.h string.h strings.h unistd.h time.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_BLKSIZE 1
_ACEOF
-fi
-done
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_blocks" "ac_cv_member_struct_stat_st_blocks" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_blocks" = xyes; then :
-for ac_header in sys/time.h sys/resource.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_BLOCKS 1
_ACEOF
-fi
-done
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_atime" "ac_cv_member_struct_stat_st_atime" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_atime" = xyes; then :
-for ac_header in fcntl.h fpu_control.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIME 1
_ACEOF
+
fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_mtime" "ac_cv_member_struct_stat_st_mtime" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_mtime" = xyes; then :
-done
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_MTIME 1
+_ACEOF
-for ac_header in dlfcn.h errno.h sys/stat.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+
+fi
+ac_fn_c_check_member "$LINENO" "struct stat" "st_ctime" "ac_cv_member_struct_stat_st_ctime" "#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+"
+if test "x$ac_cv_member_struct_stat_st_ctime" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_CTIME 1
_ACEOF
+
fi
-done
+ac_fn_c_check_type "$LINENO" "socklen_t" "ac_cv_type_socklen_t" "#include <sys/types.h>
+#include <sys/socket.h>
-for ac_func in getrusage time sigaction __setfpucw
-do :
- as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+"
+if test "x$ac_cv_type_socklen_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_SOCKLEN_T 1
_ACEOF
+
fi
-done
# Check for socket libraries
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for bind in -lsocket" >&5
$as_echo_n "checking for bind in -lsocket... " >&6; }
-if test "${ac_cv_lib_socket_bind+set}" = set; then :
+if ${ac_cv_lib_socket_bind+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_bind" >&5
$as_echo "$ac_cv_lib_socket_bind" >&6; }
-if test "x$ac_cv_lib_socket_bind" = x""yes; then :
+if test "x$ac_cv_lib_socket_bind" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBSOCKET 1
_ACEOF
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5
$as_echo_n "checking for gethostbyname in -lnsl... " >&6; }
-if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then :
+if ${ac_cv_lib_nsl_gethostbyname+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5
$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; }
-if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then :
+if test "x$ac_cv_lib_nsl_gethostbyname" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBNSL 1
_ACEOF
do :
ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
"
-if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_DLFCN_H 1
_ACEOF
do :
ac_fn_c_check_header_compile "$LINENO" "windows.h" "ac_cv_header_windows_h" "$ac_includes_default
"
-if test "x$ac_cv_header_windows_h" = x""yes; then :
+if test "x$ac_cv_header_windows_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_WINDOWS_H 1
_ACEOF
no) plugins=no ;;
*) plugins=yes
if test "$maybe_plugins" != "yes" ; then
- as_fn_error "Building with plugin support requires a host that supports dlopen." "$LINENO" 5
+ as_fn_error $? "Building with plugin support requires a host that supports dlopen." "$LINENO" 5
fi ;;
esac
else
fi
if test "$plugins" = "yes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
-$as_echo_n "checking for library containing dlopen... " >&6; }
-if test "${ac_cv_search_dlopen+set}" = set; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlsym" >&5
+$as_echo_n "checking for library containing dlsym... " >&6; }
+if ${ac_cv_search_dlsym+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_func_search_save_LIBS=$LIBS
#ifdef __cplusplus
extern "C"
#endif
-char dlopen ();
+char dlsym ();
int
main ()
{
-return dlopen ();
+return dlsym ();
;
return 0;
}
LIBS="-l$ac_lib $ac_func_search_save_LIBS"
fi
if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_dlopen=$ac_res
+ ac_cv_search_dlsym=$ac_res
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext
- if test "${ac_cv_search_dlopen+set}" = set; then :
+ if ${ac_cv_search_dlsym+:} false; then :
break
fi
done
-if test "${ac_cv_search_dlopen+set}" = set; then :
+if ${ac_cv_search_dlsym+:} false; then :
else
- ac_cv_search_dlopen=no
+ ac_cv_search_dlsym=no
fi
rm conftest.$ac_ext
LIBS=$ac_func_search_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
-$as_echo "$ac_cv_search_dlopen" >&6; }
-ac_res=$ac_cv_search_dlopen
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlsym" >&5
+$as_echo "$ac_cv_search_dlsym" >&6; }
+ac_res=$ac_cv_search_dlsym
if test "$ac_res" != no; then :
test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
$as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then :
+if ${lt_cv_objdir+:} false; then :
$as_echo_n "(cached) " >&6
else
rm -f .libs 2>/dev/null
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
if test -n "$ac_tool_prefix"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
$as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_rtti_exceptions=no
if test -n "$lt_prog_compiler_pic"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_pic_works=no
wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+if ${lt_cv_prog_compiler_static_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o=no
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
$as_echo_n "checking if $CC understands -b... " >&6; }
-if test "${lt_cv_prog_compiler__b+set}" = set; then :
+if ${lt_cv_prog_compiler__b+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler__b=no
# to ld, don't add -lc before -lgcc.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-if test "${lt_cv_archive_cmds_need_lc+set}" = set; then :
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
$as_echo_n "(cached) " >&6
else
$RM conftest*
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
# Some binutils ld are patched to set DT_RUNPATH
- if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then :
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_shlibpath_overrides_runpath=no
# if libdl is installed we need to link against it
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
*)
ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
-if test "x$ac_cv_func_shl_load" = x""yes; then :
+if test "x$ac_cv_func_shl_load" = xyes; then :
lt_cv_dlopen="shl_load"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+if ${ac_cv_lib_dld_shl_load+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
else
ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
-if test "x$ac_cv_func_dlopen" = x""yes; then :
+if test "x$ac_cv_func_dlopen" = xyes; then :
lt_cv_dlopen="dlopen"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+if ${ac_cv_lib_svld_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+if ${ac_cv_lib_dld_dld_link+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then :
+if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12540 "configure"
+#line 11209 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then :
+if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12646 "configure"
+#line 11315 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-. ${srcdir}/../../bfd/configure.host
-
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
-# Check whether --enable-sim-cflags was given.
-if test "${enable_sim_cflags+set}" = set; then :
- enableval=$enable_sim_cflags; case "${enableval}" in
- yes) sim_cflags="-O2 -fomit-frame-pointer";;
- trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";;
- no) sim_cflags="";;
- *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
- echo "Setting sim cflags = $sim_cflags" 6>&1
-fi
-else
- sim_cflags=""
-fi
-
-
-
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sim debug setting" >&5
+$as_echo_n "checking for sim debug setting... " >&6; }
+sim_debug="0"
# Check whether --enable-sim-debug was given.
if test "${enable_sim_debug+set}" = set; then :
enableval=$enable_sim_debug; case "${enableval}" in
- yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;
- no) sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;
- *) sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;
+ yes) sim_debug="7";;
+ no) sim_debug="0";;
+ *) sim_debug="($enableval)";;
esac
-if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
- echo "Setting sim debug = $sim_debug" 6>&1
fi
-else
- sim_debug=""
+if test "$sim_debug" != "0"; then
+
+cat >>confdefs.h <<_ACEOF
+#define DEBUG $sim_debug
+_ACEOF
+
fi
+cat >>confdefs.h <<_ACEOF
+#define WITH_DEBUG $sim_debug
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $sim_debug" >&5
+$as_echo "$sim_debug" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sim stdio debug behavior" >&5
+$as_echo_n "checking for sim stdio debug behavior... " >&6; }
+sim_stdio="0"
# Check whether --enable-sim-stdio was given.
if test "${enable_sim_stdio+set}" = set; then :
enableval=$enable_sim_stdio; case "${enableval}" in
- yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
- no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-stdio\"" "$LINENO" 5; sim_stdio="";;
+ yes) sim_stdio="DO_USE_STDIO";;
+ no) sim_stdio="DONT_USE_STDIO";;
+ *) as_fn_error $? "Unknown value $enableval passed to --enable-sim-stdio" "$LINENO" 5;;
esac
-if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
- echo "Setting stdio flags = $sim_stdio" 6>&1
-fi
-else
- sim_stdio=""
fi
+cat >>confdefs.h <<_ACEOF
+#define WITH_STDIO $sim_stdio
+_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $sim_stdio" >&5
+$as_echo "$sim_stdio" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sim trace settings" >&5
+$as_echo_n "checking for sim trace settings... " >&6; }
+sim_trace="~TRACE_debug"
# Check whether --enable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then :
enableval=$enable_sim_trace; case "${enableval}" in
- yes) sim_trace="-DWITH_TRACE=-1";;
- no) sim_trace="-DWITH_TRACE=0";;
+ yes) sim_trace="-1";;
+ no) sim_trace="0";;
[-0-9]*)
- sim_trace="-DWITH_TRACE='(${enableval})'";;
+ sim_trace="'(${enableval})'";;
[[:lower:]]*)
sim_trace=""
for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
if test x"$sim_trace" = x; then
- sim_trace="-DWITH_TRACE='(TRACE_$x"
+ sim_trace="(TRACE_$x"
else
sim_trace="${sim_trace}|TRACE_$x"
fi
done
- sim_trace="$sim_trace)'" ;;
+ sim_trace="$sim_trace)" ;;
esac
-if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
- echo "Setting sim trace = $sim_trace" 6>&1
-fi
-else
- sim_trace=""
fi
+cat >>confdefs.h <<_ACEOF
+#define WITH_TRACE $sim_trace
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $sim_trace" >&5
+$as_echo "$sim_trace" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sim profile settings" >&5
+$as_echo_n "checking for sim profile settings... " >&6; }
+profile="1"
+sim_profile="-1"
# Check whether --enable-sim-profile was given.
if test "${enable_sim_profile+set}" = set; then :
enableval=$enable_sim_profile; case "${enableval}" in
- yes) sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;
- no) sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;
+ yes) profile="1" sim_profile="-1";;
+ no) profile="0" sim_profile="0";;
[-0-9]*)
- sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;
+ profile="(${enableval})" sim_profile="(${enableval})";;
[a-z]*)
+ profile="1"
sim_profile=""
for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
if test x"$sim_profile" = x; then
- sim_profile="-DWITH_PROFILE='(PROFILE_$x"
+ sim_profile="(PROFILE_$x"
else
sim_profile="${sim_profile}|PROFILE_$x"
fi
done
- sim_profile="$sim_profile)'" ;;
+ sim_profile="$sim_profile)" ;;
esac
-if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
- echo "Setting sim profile = $sim_profile" 6>&1
fi
-else
- sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"
+
+cat >>confdefs.h <<_ACEOF
+#define PROFILE $profile
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define WITH_PROFILE $sim_profile
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $sim_profile" >&5
+$as_echo "$sim_profile" >&6; }
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable sim asserts" >&5
+$as_echo_n "checking whether to enable sim asserts... " >&6; }
+sim_assert="1"
+# Check whether --enable-sim-assert was given.
+if test "${enable_sim_assert+set}" = set; then :
+ enableval=$enable_sim_assert; case "${enableval}" in
+ yes) sim_assert="1";;
+ no) sim_assert="0";;
+ *) as_fn_error $? "--enable-sim-assert does not take a value" "$LINENO" 5;;
+esac
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define WITH_ASSERT $sim_assert
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $sim_assert" >&5
+$as_echo "$sim_assert" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking default sim environment setting" >&5
+$as_echo_n "checking default sim environment setting... " >&6; }
+sim_environment="ALL_ENVIRONMENT"
+# Check whether --enable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then :
+ enableval=$enable_sim_environment; case "${enableval}" in
+ all | ALL) sim_environment="ALL_ENVIRONMENT";;
+ user | USER) sim_environment="USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="OPERATING_ENVIRONMENT";;
+ *) as_fn_error $? "Unknown value $enableval passed to --enable-sim-environment" "$LINENO" 5;;
+esac
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define WITH_ENVIRONMENT $sim_environment
+_ACEOF
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $sim_environment" >&5
+$as_echo "$sim_environment" >&6; }
+
+
+sim_inline="-DDEFAULT_INLINE=0"
+# Check whether --enable-sim-inline was given.
+if test "${enable_sim_inline+set}" = set; then :
+ enableval=$enable_sim_inline; sim_inline=""
+case "$enableval" in
+ no) sim_inline="-DDEFAULT_INLINE=0";;
+ 0) sim_inline="-DDEFAULT_INLINE=0";;
+ yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;
+ 1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
+ *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ new_flag=""
+ case "$x" in
+ *_INLINE=*) new_flag="-D$x";;
+ *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
+ *_INLINE) new_flag="-D$x=ALL_C_INLINE";;
+ *) new_flag="-D$x""_INLINE=ALL_C_INLINE";;
+ esac
+ if test x"$sim_inline" = x""; then
+ sim_inline="$new_flag"
+ else
+ sim_inline="$sim_inline $new_flag"
+ fi
+ done;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
+ echo "Setting inline flags = $sim_inline" 6>&1
+fi
fi
# Check whether --with-pkgversion was given.
if test "${with_pkgversion+set}" = set; then :
withval=$with_pkgversion; case "$withval" in
- yes) as_fn_error "package version not specified" "$LINENO" 5 ;;
+ yes) as_fn_error $? "package version not specified" "$LINENO" 5 ;;
no) PKGVERSION= ;;
*) PKGVERSION="($withval) " ;;
esac
# Check whether --with-bugurl was given.
if test "${with_bugurl+set}" = set; then :
withval=$with_bugurl; case "$withval" in
- yes) as_fn_error "bug URL not specified" "$LINENO" 5 ;;
+ yes) as_fn_error $? "bug URL not specified" "$LINENO" 5 ;;
no) BUGURL=
;;
*) BUGURL="$withval"
;;
esac
else
- BUGURL="http://www.gnu.org/software/gdb/bugs/"
+ BUGURL="https://www.gnu.org/software/gdb/bugs/"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
$as_echo_n "checking return type of signal handlers... " >&6; }
-if test "${ac_cv_type_signal+set}" = set; then :
+if ${ac_cv_type_signal+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-sim_link_files=
-sim_link_links=
-
-# targ-vals.def points to the libc macro description file.
-case "${target}" in
-*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
-esac
-sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
-sim_link_links="${sim_link_links} targ-vals.def"
-
-
wire_endian="BIG"
sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi;;
- *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
+ *) as_fn_error $? "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
echo "Setting endian flags = $sim_endian" 6>&1
sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
fi
fi;;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-alignment\"" "$LINENO" 5; sim_alignment="";;
+ *) as_fn_error $? "\"Unknown value $enableval passed to --enable-sim-alignment\"" "$LINENO" 5; sim_alignment="";;
esac
if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
echo "Setting alignment flags = $sim_alignment" 6>&1
yes) sim_scache="-DWITH_SCACHE=${default_sim_scache}";;
no) sim_scache="-DWITH_SCACHE=0" ;;
[0-9]*) sim_scache="-DWITH_SCACHE=${enableval}";;
- *) as_fn_error "\"Bad value $enableval passed to --enable-sim-scache\"" "$LINENO" 5;
+ *) as_fn_error $? "\"Bad value $enableval passed to --enable-sim-scache\"" "$LINENO" 5;
sim_scache="";;
esac
if test x"$silent" != x"yes" && test x"$sim_scache" != x""; then
# Check whether --enable-sim-default-model was given.
if test "${enable_sim_default_model+set}" = set; then :
enableval=$enable_sim_default_model; case "${enableval}" in
- yes|no) as_fn_error "\"Missing argument to --enable-sim-default-model\"" "$LINENO" 5;;
+ yes|no) as_fn_error $? "\"Missing argument to --enable-sim-default-model\"" "$LINENO" 5;;
*) sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
esac
if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
-# Check whether --enable-sim-environment was given.
-if test "${enable_sim_environment+set}" = set; then :
- enableval=$enable_sim_environment; case "${enableval}" in
- all | ALL) sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
- user | USER) sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-environment\"" "$LINENO" 5;
- sim_environment="";;
+# Check whether --enable-werror was given.
+if test "${enable_werror+set}" = set; then :
+ enableval=$enable_werror; case "${enableval}" in
+ yes | y) ERROR_ON_WARNING="yes" ;;
+ no | n) ERROR_ON_WARNING="no" ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-werror" "$LINENO" 5 ;;
+ esac
+fi
+
+
+# Enable -Werror by default when using gcc
+if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
+ ERROR_ON_WARNING=yes
+fi
+
+WERROR_CFLAGS=""
+
+build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \
+-Wpointer-sign \
+-Wno-unused -Wunused-value -Wunused-function \
+-Wno-switch -Wno-char-subscripts -Wmissing-prototypes
+-Wdeclaration-after-statement -Wempty-body -Wmissing-parameter-type \
+-Wold-style-declaration -Wold-style-definition"
+
+# Enable -Wno-format by default when using gcc on mingw since many
+# GCC versions complain about %I64.
+case "${host}" in
+ *-*-mingw32*) build_warnings="$build_warnings -Wno-format" ;;
+ *) build_warnings="$build_warnings -Wformat-nonliteral" ;;
+esac
+
+# Check whether --enable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then :
+ enableval=$enable_build_warnings; case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting compiler warning flags = $build_warnings" 6>&1
+fi
+fi
+# Check whether --enable-sim-build-warnings was given.
+if test "${enable_sim_build_warnings+set}" = set; then :
+ enableval=$enable_sim_build_warnings; case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
-if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
- echo "Setting sim environment = $sim_environment" 6>&1
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes
+then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking compiler warning flags" >&5
+$as_echo_n "checking compiler warning flags... " >&6; }
+ # Separate out the -Werror flag as some files just cannot be
+ # compiled with it enabled.
+ for w in ${build_warnings}; do
+ case $w in
+ -Werr*) WERROR_CFLAGS=-Werror ;;
+ *) # Check that GCC accepts it
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -Werror $w"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ WARN_CFLAGS="${WARN_CFLAGS} $w"
fi
-else
- sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$saved_CFLAGS"
+ esac
+ done
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${WARN_CFLAGS} ${WERROR_CFLAGS}" >&5
+$as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; }
fi
yes) cgen_maint=yes ;;
no) cgen_maint=no ;;
*)
- # argument is cgen install directory (not implemented yet).
- # Having a `share' directory might be more appropriate for the .scm,
- # .cpu, etc. files.
- cgendir=${cgen_maint}/lib/cgen
- cgen=guile
+ # Argument is a directory where cgen can be found. In some
+ # future world cgen could be installable, but right now this
+ # is not the case. Instead we assume the directory is a path
+ # to the cgen source tree.
+ cgen_maint=yes
+ if test -r ${enableval}/iformat.scm; then
+ # This looks like a cgen source tree.
+ cgendir=${enableval}
+ else
+ as_fn_error $? "${enableval} doesn't look like a cgen source tree" "$LINENO" 5
+ fi
;;
esac
fi
enableval=$enable_sim_trapdump; case "${enableval}" in
yes) sim_trapdump="-DTRAPDUMP=1";;
no) sim_trapdump="-DTRAPDUMP=0";;
- *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-trapdump\"" "$LINENO" 5; sim_trapdump="";;
+ *) as_fn_error $? "\"Unknown value $enableval passed to --enable-sim-trapdump\"" "$LINENO" 5; sim_trapdump="";;
esac
if test x"$silent" != x"yes" && test x"$sim_trapdump" != x""; then
echo "Setting sim_trapdump = $sim_trapdump" 6>&1
case " $hardware " in
*" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
-if test "${ac_cv_lib_m_log2+set}" = set; then :
+if ${ac_cv_lib_m_log2+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log2" >&5
$as_echo "$ac_cv_lib_m_log2" >&6; }
-if test "x$ac_cv_lib_m_log2" = x""yes; then :
+if test "x$ac_cv_lib_m_log2" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBM 1
_ACEOF
-ac_sources="$sim_link_files"
-ac_dests="$sim_link_links"
-while test -n "$ac_sources"; do
- set $ac_dests; ac_dest=$1; shift; ac_dests=$*
- set $ac_sources; ac_source=$1; shift; ac_sources=$*
- ac_config_links_1="$ac_config_links_1 $ac_dest:$ac_source"
-done
-ac_config_links="$ac_config_links $ac_config_links_1"
-
cgen_breaks=""
if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
cgen_breaks="break cgen_rtx_error";
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
:end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
+ if test "x$cache_file" != "x/dev/null"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
ac_libobjs=
ac_ltlibobjs=
+U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-if test -z "${GMAKE_TRUE}" && test -z "${GMAKE_FALSE}"; then
- as_fn_error "conditional \"GMAKE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
if test -z "${PLUGINS_TRUE}" && test -z "${PLUGINS_FALSE}"; then
- as_fn_error "conditional \"PLUGINS\" was never defined.
+ as_fn_error $? "conditional \"PLUGINS\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
- $as_echo "$as_me: error: $1" >&2
+ $as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# values after options handling.
ac_log="
This file was extended by $as_me, which was
-generated by GNU Autoconf 2.64. Invocation command line was
+generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"
-config_links="$ac_config_links"
config_commands="$ac_config_commands"
_ACEOF
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
Configuration headers:
$config_headers
-Configuration links:
-$config_links
-
Configuration commands:
$config_commands
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
config.status
-configured by $0, generated by GNU Autoconf 2.64,
- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
while test $# != 0
do
case $1 in
- --*=*)
+ --*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
*)
ac_option=$1
ac_optarg=$2
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
$as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
- as_fn_error "ambiguous option: \`$1'
+ as_fn_error $? "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
--help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
ac_cs_silent=: ;;
# This is an error.
- -*) as_fn_error "unrecognized option: \`$1'
+ -*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
"depdir") CONFIG_COMMANDS="$CONFIG_COMMANDS depdir" ;;
"libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
- "$ac_config_links_1") CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
"Makefile.sim") CONFIG_FILES="$CONFIG_FILES Makefile.sim:Makefile.in" ;;
"Make-common.sim") CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit") CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
"stamp-h") CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
- *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_LINKS+set}" = set || CONFIG_LINKS=$config_links
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- tmp=
+ tmp= ac_tmp=
trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
trap 'as_fn_exit 1' 1 2 13 15
}
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
+ test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\r'
+ ac_cs_awk_cr='\\r'
else
ac_cs_awk_cr=$ac_cr
fi
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
rm -f conf$$subs.sh
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
t delim
:nl
h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
t nl
:delim
h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = "\a"
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || as_fn_error "could not setup config files machinery" "$LINENO" 5
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
s/^[^=]*=[ ]*$//
}'
fi
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
_ACEOF
# handling of long lines.
ac_delim='%!_!# '
for ac_last_try in false false :; do
- ac_t=`sed -n "/$ac_delim/p" confdefs.h`
- if test -z "$ac_t"; then
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
break
elif $ac_last_try; then
- as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- as_fn_error "could not setup config headers machinery" "$LINENO" 5
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"
-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :L $CONFIG_LINKS :C $CONFIG_COMMANDS"
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
shift
for ac_tag
do
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
for ac_f
do
case $ac_f in
- -) ac_f="$tmp/stdin";;
+ -) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
esac
case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
s&@INSTALL@&$ac_INSTALL&;t t
$ac_datarootdir_hack
"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
+which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
+which seems to be undefined. Please make sure it is defined" >&2;}
- rm -f "$tmp/stdin"
+ rm -f "$ac_tmp/stdin"
case $ac_file in
- -) cat "$tmp/out" && rm -f "$tmp/out";;
- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
:H)
#
if test x"$ac_file" != x-; then
{
$as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
- } >"$tmp/config.h" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
- if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
- mv "$tmp/config.h" "$ac_file" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
$as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
- || as_fn_error "could not create -" "$LINENO" 5
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
fi
;;
- :L)
- #
- # CONFIG_LINK
- #
-
- if test "$ac_source" = "$ac_file" && test "$srcdir" = '.'; then
- :
- else
- # Prefer the file from the source tree if names are identical.
- if test "$ac_source" = "$ac_file" || test ! -r "$ac_source"; then
- ac_source=$srcdir/$ac_source
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: linking $ac_source to $ac_file" >&5
-$as_echo "$as_me: linking $ac_source to $ac_file" >&6;}
-
- if test ! -r "$ac_source"; then
- as_fn_error "$ac_source: file not found" "$LINENO" 5
- fi
- rm -f "$ac_file"
- # Try a relative symlink, then a hard link, then a copy.
- case $srcdir in
- [\\/$]* | ?:[\\/]* ) ac_rel_source=$ac_source ;;
- *) ac_rel_source=$ac_top_build_prefix$ac_source ;;
- esac
- ln -s "$ac_rel_source" "$ac_file" 2>/dev/null ||
- ln "$ac_source" "$ac_file" 2>/dev/null ||
- cp -p "$ac_source" "$ac_file" ||
- as_fn_error "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
- fi
- ;;
:C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
;;
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
- as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit $?
+ $ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
projects / thirdparty / binutils-gdb.git / blobdiff