Nick Clifton [Wed, 12 Aug 2020 12:31:59 +0000 (13:31 +0100)]
Add demangling support to readelf.
PR binutils/26331
* readelf.c (do_demangle): New option flag.
(print_symbol): If do_demangle is enabled, demangle the symbol.
(enum long_option_values): New enum to hold long option values.
(options): Add demangle, no-demangle, recursion-limit and
no-recursion-limit options. Alpha sort the table.
(usage): Describe the new options.
(parse_args): Handle the new options.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* testsuite/binutils-all/readelf.exp: Test the new feature.
* testsuite/binutils-all/mangled.s: New file - assembler source.
* testsuite/binutils-all/readelf.demangled: New file - expected
output from readelf.
Tom de Vries [Tue, 11 Aug 2020 09:07:54 +0000 (11:07 +0200)]
[gdb/build] Mark ms1 as deleted in MAINTAINERS
When running gdb/gdb_mbuild.sh, we run into:
...
ms1-elf ...
... src/configure --target=ms1-elf --enable-gdb-build-warnings=,-Werror \
--enable-sim-build-warnings=,-Werror
... make -k -j 5 ms1-elf
ms1-elf: compile failed
...
In mbuild/ms1-elf/Build.log we find:
...
*** Configuration mt-unknown-elf is obsolete.
*** Support has been REMOVED.
make: *** [Makefile:10995: configure-gdb] Error 1
...
The support for ms1-elf, aka mt-elf, has been removed since commit dc71152484
"Remove mt port" in Jan 2018. Make this official in the MAINTAINERS file.
Alex Coplan [Mon, 10 Aug 2020 16:44:02 +0000 (17:44 +0100)]
aarch64: Don't assert on long sysreg names
This patch fixes an assertion failure on long system register operands
in the AArch64 backend. See the new testcase for an input which
reproduces the issue.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sys_reg): Don't assert when parsing
a long system register.
(parse_sys_ins_reg): Likewise.
(sysreg_hash_insert): New.
(md_begin): Use sysreg_hash_insert() to ensure all system
registers are no longer than the maximum length at startup.
* testsuite/gas/aarch64/invalid-sysreg-assert.d: New test.
* testsuite/gas/aarch64/invalid-sysreg-assert.l: Error output.
* testsuite/gas/aarch64/invalid-sysreg-assert.s: Input.
Tom de Vries [Mon, 10 Aug 2020 15:26:09 +0000 (17:26 +0200)]
[sim] Fix mbuild build breaker in sim-cpu.c
When running gdb/gdb_mbuild.sh, I run into:
...
src/sim/aarch64/../common/sim-cpu.c: In function 'sim_cpu_free':
src/sim/aarch64/../common/sim-cpu.c:64:3: error: implicit declaration of \
function 'free' [-Werror=implicit-function-declaration]
free (cpu);
^~~~
src/sim/aarch64/../common/sim-cpu.c:64:3: error: incompatible implicit \
declaration of built-in function 'free' [-Werror]
src/sim/aarch64/../common/sim-cpu.c:64:3: note: include '<stdlib.h>' or \
provide a declaration of 'free'
...
We should've stopped at 0x700, but the analyzer actually skips
that instruction and stops at 0x704. Then GDB ends up adjusting
the address further, and pushes the stopping point to 0x708 based on the
SAL information.
I'm not sure if this adjustment to 0x708 is correct though, as it ends up
skipping past a branch. But I'm leaving that aside for now.
One other complicating factor is that GCC seems to be hoisting up instructions
from user code, mixing them up with prologue instructions.
The following patch adjusts the heuristics a little bit, and tracks when the
SP and FP get used. If we notice an instruction that is not supposed to be
in the prologue, and this happens *after* SP/FP adjustments and saving of
registers, we stop the analysis.
This means, for PR26310, that we will now stop at 0x700.
I've also added a few more unit tests to make sure the updated behavior is
validated.
gdb/ChangeLog:
2020-08-10 Luis Machado <luis.machado@linaro.org>
PR gdb/26310
* aarch64-tdep.c (aarch64_analyze_prologue): Track use of SP/FP and
act accordingly.
(aarch64_analyze_prologue_test): Add more unit tests to exercise
movz/str/stur/stp skipping behavior.
We should do the same for GDB, which is still carrying an incorrect
definition of the macro. As stated in the kernel patch thread, this doesn't
actually change things because, luckily, the structs are of the same size.
gdb/ChangeLog:
2020-08-10 Luis Machado <luis.machado@linaro.org>
* nat/aarch64-sve-linux-sigcontext.h (SVE_PT_REGS_OFFSET): Use
struct user_sve_header instead of struct sve_context.
Simon Marchi [Sun, 9 Aug 2020 22:26:48 +0000 (18:26 -0400)]
gdb: replace function pointer with `void *` data with function_view
Replace the function pointer + `void *` parameters of
dwarf2_fetch_die_loc_sect_off and dwarf2_fetch_die_loc_cu_off with a
function_view parameter. Change call sites to use a lambda function.
This improves type-safety, so reduces the chances of errors.
Tom de Vries [Sat, 8 Aug 2020 21:34:19 +0000 (23:34 +0200)]
[gdb/build] Fix missing implicit constructor call with gcc 4.8
When building gdb on x86_64-linux with --enable-targets riscv64-suse-linux, I
run into:
...
src/gdb/arch/riscv.c:112:45: required from here
/usr/include/c++/4.8/bits/hashtable_policy.h:195:39: error: no matching \
function for call to 'std::pair<const riscv_gdbarch_features, const \
std::unique_ptr<target_desc, target_desc_deleter> >::pair(const \
riscv_gdbarch_features&, target_desc*&)'
: _M_v(std::forward<_Args>(__args)...) { }
^
...
for this code in riscv_lookup_target_description:
...
/* Add to the cache. */
riscv_tdesc_cache.emplace (features, tdesc);
...
Work around this compiler problem (filed as PR gcc/96537), similar to how that
was done in commit 6d0cf4464e "Fix build with gcc-4.8.x":
...
- riscv_tdesc_cache.emplace (features, tdesc);
+ riscv_tdesc_cache.emplace (features, target_desc_up (tdesc));
...
That is, call the target_desc_up constructor explictly instead of implicitly.
Also, work around a similar issue in get_thread_arch_aspace_regcache.
Build on x86_64-linux with --enable-targets riscv64-suse-linux, and
reg-tested.
gdb/ChangeLog:
2020-08-08 Tom de Vries <tdevries@suse.de>
PR build/26344
* arch/riscv.c (riscv_lookup_target_description): Use an explicit
constructor.
* regcache.c (get_thread_arch_aspace_regcache): Same.
David Faust [Fri, 7 Aug 2020 18:36:47 +0000 (20:36 +0200)]
bpf: fix false overflow in eBPF ELF backend linker
When performing DISP{16,32} relocations, the eBPF ELF backend linker
needs to convert the relocation from an address into a signed number
of 64-bit words (minus one) to jump.
Because of this unsigned-to-signed conversion, special care needs to
be taken when dividing to ensure the sign bits remain correct.
Otherwise, a false relocation overflow error can be triggered.
bfd/ChangeLog
2020-08-07 David Faust <david.faust@oracle.com>
* elf64-bpf.c (bpf_elf_relocate_section): Ensure signed division for
DISP16 and DISP32 relocations.
ld/ChangeLog
2020-08-07 David Faust <david.faust@oracle.com>
* testsuite/ld-bpf/call-3.s: New file.
* testsuite/ld-bpf/call-3.d: Likewise.
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Fix remaining Ravenscar regressions
Testing showed a few more Ravenscar regressions arising from upstream.
In particular, gdb now uses the current thread in some places where
inferior_ptid was previously used. This patch fixes the problem by
arranging to save and restore the thread now.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
* ravenscar-thread.c
(ravenscar_thread_target::set_base_thread_from_ravenscar_task):
New method.
(ravenscar_thread_target::wait): Check
runtime_initialized.
(ravenscar_thread_target::prepare_to_store)
(ravenscar_thread_target::stopped_by_sw_breakpoint)
(ravenscar_thread_target::stopped_by_hw_breakpoint)
(ravenscar_thread_target::stopped_by_watchpoint)
(ravenscar_thread_target::stopped_data_address)
(ravenscar_thread_target::core_of_thread): Use
scoped_restore_current_thread and
set_base_thread_from_ravenscar_task.
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Set inferior_ptid in ravenscar_thread_target::update_thread_list
Commit 2da4b788f ("Don't write to inferior_ptid in
ravenscar-thread.c") caused a Ravenscar regression (which, FWIW, is
understandable because Ravenscar is difficult to test). Namely,
ravenscar_thread_target::update_thread_list calls
iterate_over_live_ada_tasks, which calls ada_build_task_list, which
uses target_has_stack -- which relies on inferior_ptid.
This patch changes update_thread_list to ensure that inferior_ptid is
set before making this call. This avoids various failures on
Ravenscar targets.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
* ravenscar-thread.c (update_thread_list): Set inferior_ptid.
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Fetch registers from correct thread in ravenscar-thread.c
Fabien also noticed that gdb would not report a stop correctly when
using Ravenscar. This patch fixes the bug by making a few changes:
* ravenscar_thread_target::wait now updates the inferior ptid before
updating the thread list. This ensures that a new thread is
correctly associated with the underlying CPU.
* The fetch_registers, store_registers, and prepare_to_store methods
now save and restore the regcache's ptid before doing the operation
on the underlying live thread. This ensures that gdb informs the
remote of a thread it knows about, as opposed to using a Ravenscar
thread, which probably will not be recognized.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
* ravenscar-thread.c (ravenscar_thread_target::wait): Call
update_inferior_ptid before update_thread_list.
(temporarily_change_regcache_ptid): New class.
(ravenscar_thread_target::fetch_registers)
(ravenscar_thread_target::store_registers)
(ravenscar_thread_target::prepare_to_store): Use base thread when
forwarding operation.
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Fix Ravenscar "process" resume
A coworker noticed that gdb would send the wrong vCont packet to qemu
when debugging a Ravenscar program:
> (gdb) thread 2
> [Switching to thread 2 (Thread 1.2)]
> #0 0x0000000000001000 in ?? ()
> (gdb) c
[...]
> Sending packet: $vCont;c:p1.1#e2...Ack
Here, we've switched to thread 2, but the packet says to resume thread
1.
This turned out to be a bug in ravenscar_thread_target::resume, which
did not properly handle the case of a "process" resume. In
particular, the resume method would be passed a ptid of (1, 0, 0) --
but then rewrite this to its saved ptid.
This patch fixes the problem by recognizing this case in the resume
method.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Update Ravenscar documentation
This documents some recent Ravenscar changes, and further documents
the known limitation where stepping through the runtime initialization
code does not work properly.
gdb/doc/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Wrap xfer_partial and enable_btrace for Ravenscar
A gdb crash showed that the xfer_partial target method was not wrapped
for Ravenscar. This caused remote.c to call
remote::set_general_thread with a Ravenscar "fake" ptid, which showed
up later as an event ptid.
I went through all the target methods and looked to see which ones
could call set_general_thread or set_continue_thread (but not
set_general_process, as I think Ravenscar targets aren't
multi-inferior). This patch wraps the two that I found.
xfer_partial requires special treatment, because it can be called
recursively via get_base_thread_from_ravenscar_task. To avoid a
recursive call, this patch changes update_thread_list to record all
tasks in the m_cpu_map, and changes get_thread_base_cpu to prefer this
map. This avoids some memory reads.
It was unclear to me whether enable_btrace really makes sense for
Ravenscar; but at the same time it seemed harmless to add this patch.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
* ravenscar-thread.c (xfer_partial, enable_btrace, add_thread):
New methods.
(ravenscar_thread_target::get_thread_base_cpu): Check m_cpu_map
first.
(ravenscar_thread_target::add_thread): Rename from
ravenscar_add_thread.
(ravenscar_thread_target::update_thread_list): Use a lambda.
(ravenscar_thread_target::xfer_partial): New method.
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Use gdb::function_view in iterate_over_live_ada_tasks
This changes iterate_over_live_ada_tasks to accept a
gdb::function_view. This is needed by a subsequent patch.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
* ada-lang.h (ada_task_list_iterator_ftype): Now a
gdb::function_view.
(iterate_over_live_ada_tasks): Change type of argument.
* ada-tasks.c (iterate_over_live_ada_tasks): Change type
of argument.
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Handle case where Ada task is current but not listed
Currently, the ravenscar runtime can mark an Ada task as the current
task, before adding it to the list of tasks that can be read by gdb.
In this scenario, gdb can sometimes crash in
ravenscar_get_thread_base_cpu with:
../../src/gdb/ravenscar-thread.c:167: internal-error: int ravenscar_get_thread_base_cpu(ptid_t): Assertion `task_info != NULL' failed.
However, as ravenscar_get_thread_base_cpu is only called to find the
base CPU, we can simply record this when registering the thread, and
look this up later.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
* ravenscar-thread.c (ravenscar_thread_target) <get_base_cpu,
get_base_thread_from_ravenscar_task>: Now methods.
<m_cpu_map>: New member.
(ravenscar_thread_target::get_thread_base_cpu): Rename from
ravenscar_get_thread_base_cpu. Check m_cpu_map.
(ravenscar_thread_target::task_is_currently_active): Update.
(ravenscar_thread_target::get_base_thread_from_ravenscar_task):
Now a method.
(ravenscar_thread_target::add_active_thread): Put initial thread
into the m_cpu_map.
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Return event_ptid from ravenscar_thread_target::wait
ravenscar_thread_target::wait should return the event ptid from the
wrapped "wait" call in the situation where returning the Ravenscar
thread ptid is not appropriate. This probably does not really make a
difference in practice, but it seemed like a reasonable cleanup.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Avoid crash in ravenscar_thread_target::wait
An earlier patch caused a Ravenscar regression in
ravenscar_thread_target::wait. In particular, add_active_thread can
return NULL when the runtime is not initialized.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
Tom Tromey [Fri, 7 Aug 2020 16:26:45 +0000 (10:26 -0600)]
Call add_active_thread after pushing the ravenscar target
Currently ravenscar-thread.c calls add_active_thread before pushing
the ravenscar target. This yields an initial thread announcement of
"[Thread 0]". Calling add_active_thread after pushing the target
fixes this.
gdb/ChangeLog
2020-08-07 Tom Tromey <tromey@adacore.com>
* ravenscar-thread.c (ravenscar_thread_target): Don't call
add_active_thread.
(ravenscar_thread_target::add_active_thread): Now public.
(ravenscar_inferior_created): Call add_active_thread after pushing
the target.
Simon Marchi [Fri, 7 Aug 2020 15:28:52 +0000 (11:28 -0400)]
gdb: change regcache list to be a map
One regcache object is created for each stopped thread and is stored in
the regcache::regcaches linked list. Looking up a regcache for a given
thread is therefore in O(number of threads). Stopping all threads then
becomes O((number of threads) ^ 2). Same goes for resuming a thread
(need to delete the regcache of a given ptid) and resuming all threads.
It becomes noticeable when debugging thousands of threads, which is
typical with GPU targets. This patch replaces the linked list with some
maps to reduce that complexity.
The first design was using an std::unordered_map with (target, ptid,
arch) as the key, because that's how lookups are done (in
get_thread_arch_aspace_regcache). However, the registers_changed_ptid
function, also somewhat on the hot path (it is used when resuming
threads), needs to delete all regcaches associated to a given (target,
ptid) tuple. If the key of the map is (target, ptid, arch), we have to
walk all items of the map, not good.
The second design was therefore using an std::unordered_multimap with
(target, ptid) as the key. One key could be associated to multiple
regcaches, all with different gdbarches. When looking up, we would have
to walk all these regcaches. This would be ok, because there will
usually be actually one matching regcache. In the exceptional
multi-arch thread cases, there will be maybe two. However, in
registers_changed_ptid, we sometimes need to remove all regcaches
matching a given target. We would then have to talk all items of the
map again, not good.
The design as implemented in this patch therefore uses two levels of
map. One std::unordered_map uses the target as the key. The value type
is an std::unordered_multimap that itself uses the ptid as the key. The
values of the multimap are the regcaches themselves. Again, we expect
to have one or very few regcaches per (target, ptid).
So, in summary:
* The lookups (in get_thread_arch_aspace_regcache), become faster when
the number of threads grows, compared to the linked list. With a
small number of threads, it will probably be a bit slower to do map
lookups than to walk a few linked list nodes, but I don't think it
will be noticeable in practice.
* The function registers_changed_ptid deletes all regcaches related to a
given (target, ptid). It must now handle the different cases separately:
- NULL target and minus_one_ptid: we delete all the entries
- NULL target and non-minus_one_ptid: invalid (checked by assert)
- non-NULL target and non-minus_one_ptid: we delete all the entries
associated to that tuple
- a non-NULL target and minus_one_ptid: we delete all the entries
associated to that target
* The function regcache_thread_ptid_changed is called when a thread
changes ptid. It is implemented efficiently using the map, although
that's not very important: it is not called often, mostly when
creating an inferior, on some specific platforms.
This patch is a tiny bit from ROCm GDB [1] we would like to merge
upstream. Laurent Morichetti gave be these performance numbers:
The benchmark used is:
time ./gdb --data-directory=data-directory /extra/lmoriche/hip/samples/0_Intro/bit_extract/bit_extract -ex "set pagination off" -ex "set breakpoint pending on" -ex "b bit_extract_kernel if \$_thread == 5" -ex run -ex c -batch
It measures the time it takes to continue from a conditional breakpoint with
2048 threads at that breakpoint, one of them reporting the breakpoint.
baseline:
real 0m10.227s
real 0m10.177s
real 0m10.362s
with patch:
real 0m8.356s
real 0m8.424s
real 0m8.494s
* regcache.c (ptid_regcache_map): New type.
(target_ptid_regcache_map): New type.
(regcaches): Change type to target_ptid_regcache_map.
(get_thread_arch_aspace_regcache): Update to regcaches' new
type.
(regcache_thread_ptid_changed): Likewise.
(registers_changed_ptid): Likewise.
(regcaches_size): Likewise.
(regcaches_test): Update.
(regcache_thread_ptid_changed): Update.
* regcache.h (regcache_up): New type.
* gdbsupport/ptid.h (hash_ptid): New struct.
Simon Marchi [Fri, 7 Aug 2020 14:59:33 +0000 (10:59 -0400)]
gdb: pass target to thread_ptid_changed observable
I noticed what I think is a potential bug. I did not observe it nor was
I able to reproduce it using actual debugging. It's quite unlikely,
because it involves multi-target and ptid clashes. I added selftests
that demonstrate it though.
The thread_ptid_changed observer says that thread with OLD_PTID now has
NEW_PTID. Now, if for some reason we happen to have two targets
defining a thread with OLD_PTID, the observers don't know which thread
this is about.
regcache::regcache_thread_ptid_changed changes all regcaches with
OLD_PTID. If there is a regcache for a thread with ptid OLD_PTID, but
that belongs to a different target, this regcache will be erroneously
changed.
Similarly, infrun_thread_ptid_changed updates inferior_ptid if
inferior_ptid matches OLD_PTID. But if inferior_ptid currently refers
not to the thread is being changed, but to a thread with the same ptid
belonging to a different target, then inferior_ptid will erroneously be
changed.
This patch adds a `process_stratum_target *` parameter to the
`thread_ptid_changed` observable and makes the two observers use it.
Tests for both are added, which would fail if the corresponding fix
wasn't done.
gdb/ChangeLog:
* observable.h (thread_ptid_changed): Add parameter
`process_stratum_target *`.
* infrun.c (infrun_thread_ptid_changed): Add parameter
`process_stratum_target *` and use it.
(selftests): New namespace.
(infrun_thread_ptid_changed): New function.
(_initialize_infrun): Register selftest.
* regcache.c (regcache_thread_ptid_changed): Add parameter
`process_stratum_target *` and use it.
(regcache_thread_ptid_changed): New function.
(_initialize_regcache): Register selftest.
* thread.c (thread_change_ptid): Pass target to
thread_ptid_changed observable.
Caroline Tice [Fri, 7 Aug 2020 00:16:45 +0000 (17:16 -0700)]
Add code for processing version 5 DWP files (for use with DWARF v5).
The DWARF v5 Spec describes a (slightly) new format for V5 .dwp files.
This patch updates GDB to allow it to read/process .dwp files in the
new DWARF v5 format, while continuing to be able to read/process .dwp files
in the older V1 & V2 formats (older, pre-standard formats).
The two major differences between the V2 and the V5 format are:
- The inclusion of DWARF-v5-specific sections:
.debug_loclists.dwo
.debug_rnglists.dwo
- The .dwp section identifier encodings have changed. The table below
shows the old & new encodings. Notice the re-purposing of 5, 7 & 8
in particular.
The area between 0xFF00 and 0xFFC0 is unallocated in the simulator
memory map, so extend the main memory region up to 0xFFC0 to allow the
simulator to make use of the extra 192 bytes of space.
sim/msp430/ChangeLog:
* msp430-sim.c (sim_open): Increase the size of the main memory region
to 0xFAC0.
Simon Marchi [Thu, 6 Aug 2020 20:23:48 +0000 (16:23 -0400)]
gdb: move regcache::regcaches to regcache.c
I don't really understand why `regcache_thread_ptid_changed` is a static
method of `struct regcache` instead of being a static free function in
regcache.c. And I don't understand why `current_regcache` is a static
member of `struct regcache` instead of being a static global in
regcache.c. It's not wrong per-se, but there's no other place where we
do it like this in GDB (as far as I remember) and it just exposes things
unnecessarily in the .h.
Move them to be just static in regcache.c. As a result,
registers_changed_ptid doesn't need to be friend of the regcache class
anymore.
Removing the include of forward_list in regcache.h showed that we were
missing an include for it in dwarf2/index-write.c, record-btrace.c and
sparc64-tdep.c.
Simon Marchi [Thu, 6 Aug 2020 20:23:36 +0000 (16:23 -0400)]
gdb: rename regcache::current_regcache to regcache::regcaches
The name `current_regcache` for the list of currently-existing regcaches
sounds wrong. The name is singular, but it holds multiple regcaches, so
it could at least be `current_regcaches`.
But in other places in GDB, "current" usually means "the object we are
working with right now". For example, we swap the "current thread" when
we want to operate on a given thread. This is not the case here, this
variable just holds all regcaches that exist at any given time, not "the
regcache we are working with right now".
So, I think calling it `regcaches` is better. I also considered
`regcache_list`, but a subsequent patch will make it a map and not a
list, so it would sound wrong again. `regcaches` sounds right for any
collection of regcache, whatever the type.
Rename a few other things that were related to this `current_regcache`
field. Note that there is a `get_current_regcache` function, which
returns the regcache of the current thread. That one is fine, because
it returns the regcache for the current thread.
Alex Coplan [Thu, 6 Aug 2020 16:39:03 +0000 (17:39 +0100)]
gas: Fix internal error on long local labels
Prior to this commit, on an input such as "88888888888:", GAS hits a
signed integer overflow and likely an assertion failure. I see:
$ echo "88888888888:" | bin/aarch64-none-elf-as
{standard input}: Assembler messages:
{standard input}:1: Internal error in fb_label_name at ../gas/symbols.c:2049.
Please report this bug.
To fix this issue, I've taken two steps:
1. Change the type used for processing local labels in
read_a_source_file() from int to long, to allow representing more
local labels, and also since all uses of this variable (temp) are
actually of type long.
2. Detect if we would overflow and bail out with an error message
instead of actually overflowing and hitting the assertion in
fb_label_name().
gas/ChangeLog:
2020-08-06 Alex Coplan <alex.coplan@arm.com>
* read.c (read_a_source_file): Use long for local labels, detect
overflow and raise an error for overly-long labels.
* testsuite/gas/all/gas.exp: Add local-label-overflow test.
* testsuite/gas/all/local-label-overflow.d: New test.
* testsuite/gas/all/local-label-overflow.l: Error output.
* testsuite/gas/all/local-label-overflow.s: Input.
David Faust [Thu, 6 Aug 2020 13:14:54 +0000 (15:14 +0200)]
bpf: relocation fixes for eBPF ELF backend
The eBPF ELF backend was not properly recording relocation addends
during installation, nor reading and applying them when performing
the final relocation. This lead to various issues with incorrect
relocations.
These issues are fixed with a new howto special function to install
the relocations, and updates to bpf_elf_relocate_section to read and
use the addends as recorded in the input_bfd.
bfd/ChangeLog
2020-08-05 David Faust <david.faust@oracle.com>
* elf64-bpf.c (bpf_elf_generic_reloc): New function.
(bpf_elf_howto_table): Use it here.
(bpf_elf_relocate_section): Use addends recorded in input_bfd for
instruction and data relocations.
MSP430: ld: Update output section tail when shuffling ".either" sections
The MSP430 linker shuffles input sections with names beginning with
".either" between the upper and lower memory regions, to try to avoid
one region overflowing when there is space in the other region.
However, when an ".either" input section attached to the tail of an
output section was moved to a different output section in the other
region, that tail wasn't being updated to the new section at the end
of the original output section.
This caused a bug where a shuffled section could end up in the
middle of another section in the output executable, resulting in
corrupted code or data.
When changing the output section of an input section attached to the
tail of its output section, that tail is now updated to point to
the new input section at the end of the section list.
ld/ChangeLog:
2020-08-06 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* emultempl/msp430.em (change_output_section): Update the tail
of the output section statement list when moving the original
tail to a different output section.
(eval_upper_either_sections): Don't move sections from the upper
region to the lower region unless the upper region is
overflowing.
Simon Marchi [Wed, 5 Aug 2020 21:38:28 +0000 (17:38 -0400)]
gdb/testsuite: link some dwarf2 tests with nopie
I noticed some gdb.dwarf2 tests not running on my machine because of
this:
Running /home/simark/src/binutils-gdb/gdb/testsuite/gdb.dwarf2/dw2-single-line-discriminators.exp ...
gdb compile failed, /usr/bin/ld: /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/dw2-single-line-discriminators/dw2-single-line-discriminators0.o: relocation R_X86_64_32S against
symbol `x' can not be used when making a PIE object; recompile with -fPIE
collect2: error: ld returned 1 exit status
We get this when the target toolchain produces position-independent
executables by default. These tests are built from some assembly which
produces some relocations incompatible with position-independent
executables.
Add `nopie` to the compilation flags of these tests to force the
toolchain to produce non-position-independent executables. With this,
the changed tests run successfully on my machine.
Tom Tromey [Wed, 5 Aug 2020 15:52:55 +0000 (09:52 -0600)]
Fix variant part regressions with older Rust compiler
Older Rust compilers used special field names, rather than DWARF
features, to express the variant parts of Rust enums. This is handled
in gdb through a quirk recognizer that rewrites the types.
Tom de Vries pointed out in PR rust/26197 that the variant part
rewrite regressed this code. This patch fixes the problems:
* Univariant enums were not handled properly. Now we simply call
alloc_rust_variant for these as well.
* There was an off-by-one error in the handling of ordinary enums.
* Ordinary enums should have the size of their member types reset to
match the size of the enclosing enum. (It's not clear to me if this
is truly necessary, but it placates a test, and this is just legacy
handling in any case.)
Tested with Rust 1.12.0, 1.14.0, 1.19.0, 1.36.0, and 1.45.0 on x86-64
Fedora 32. There were some unrelated failures with 1.14.0 and 1.19,0;
but considering that these are fairly old releases, I don't plan to
look into them unless someone complains.
Note that this patch will not fix all the issues in the PR. In that
PR, Tom is using a somewhat unusual build of Rust -- in particular it
uses an older (pre-DWARF variant part) LLVM with a newer Rust. I
believe this compiler doesn't correctly implement the old-style name
fallback; the details are in the bug.
gdb/ChangeLog
2020-08-05 Tom Tromey <tromey@adacore.com>
PR rust/26197:
* dwarf2/read.c (alloc_rust_variant): Handle univariant case.
(quirk_rust_enum): Call alloc_rust_variant for univariant case.
Fix off-by-one and type size errors in ordinary case.
MSP430: sim: Fix incorrect simulation of unsigned widening multiply
Operand sizes used for simulation of MSP430 hardware multiply
operations are not aligned with the sizes used on the target, resulting
in the simulator storing signed operands with too much precision.
Additionally, simulation of unsigned multiplication is missing explicit
casts to prevent any implicit sign extension.
gcc.c-torture/execute/pr91450-1.c uses unsigned widening multiplication
of 32-bit operands -4 and 2, to produce a 64-bit result:
0xffff fffc * 0x2 = 0x1 ffff fff8
If -4 is stored in 64-bit precision, then the multiplication is
essentially signed and the result is -8 in 64-bit precision
(0xffff ffff ffff fffc), which is not correct.
sim/msp430/ChangeLog:
* msp430-sim.c (put_op): For unsigned multiplication, explicitly cast
operands to the unsigned type before multiplying.
* msp430-sim.h (struct msp430_cpu_state): Fix types used to store hwmult
operands.
Tom de Vries [Wed, 5 Aug 2020 10:31:58 +0000 (12:31 +0200)]
[gdb] Fix prop->const_val uses in gdbtypes.c
After commit 66d6346b25 "gdb: remove TYPE_DYN_PROP_ADDR", I run into:
...
FAIL: gdb.fortran/class-allocatable-array.exp: print this%_data%b
...
(and 185 more FAILs, all for fortran test-cases).
The commit replaces "!x" by "x != 0".
Fix this by using "x == 0" instead.
Build and tested on x86_64-linux.
gdb/ChangeLog:
2020-08-05 Tom de Vries <tdevries@suse.de>
* gdbtypes.c (type_not_allocated, type_not_associated): Use
"prop->const_val () == 0" instead of "prop->const_val () != 0".
Alan Modra [Wed, 5 Aug 2020 00:33:00 +0000 (10:03 +0930)]
PR26337, Malloc size error in objdump
A malloc failure triggered by a fuzzed object file isn't a real
problem unless objdump doesn't exit cleanly after the failure, which
it does. However we have bfd_malloc_and_get_section to sanity check
size of uncompressed sections before allocating memory. Use it.
PR 26337
* objdump.c (load_specific_debug_section): Don't malloc space for
section contents, use bfd_malloc_and_get_section.
Simon Marchi [Tue, 4 Aug 2020 18:53:10 +0000 (14:53 -0400)]
gdb: use bool in frame code
Change instances of int variables and return values used as boolean
values to use the bool type.
Shorten the comments of a few functions, because I think they go a bit
too much in implementation details, which appear out of date anyway.
Make other misc changes to the functions that are already being changed,
such as using nullptr instead of NULL, dropping `struct` keywords and
declaring variables when first used.
Simon Marchi [Tue, 4 Aug 2020 18:52:44 +0000 (14:52 -0400)]
gdb: change frame_info::prev_func::p type to cached_copy_status
One might think that variable `frame_info::prev_func::p` is a simple
true/false value, but that's not the case, it can also have the value -1
to mean "unavaiable". Change it to use the `cached_copy_status` enum,
which seems designed exactly for this purpose.
Rename to `status` to be consistent with `prev_pc::status` (and be cause
`p` means `predicate`, which implies boolean, which this is not).
gdb/ChangeLog:
* frame.c (frame_info) <prev_func> <p>: Rename to status, change
type to cached_copy_status.
(fprintf_frame): Adjust.
(get_frame_func_if_available): Adjust.
(frame_cleanup_after_sniffer): Adjust.
Andrew Burgess [Tue, 4 Aug 2020 11:13:37 +0000 (12:13 +0100)]
gdb/testsuite: Use 'array unset' instead of just 'unset'
In the check-test-names.exp library 'unset' was being used to unset an
array variable. Though this seems to work fine on tcl 8.6, it was
discovered on a CentOS 7.8.2003 machine, running tcl 8.5, that this
doesn't work and 'array unset' should be used instead.
Using 'array unset' should work fine for newer and older versions of
tcl (since 8.3, releases ~2000).
gdb/testsuite/ChangeLog:
* lib/check-test-names.exp (do_reset_vars): Use 'array unset' to
unset the array variable.
Mark Wielaard [Mon, 3 Aug 2020 20:02:24 +0000 (22:02 +0200)]
gas: Use udata for DW_AT_high_pc when emitting DWARF4
For DWARF4 DW_AT_high_pc can be expressed as constant offset from
DW_AT_low_pc which saves a relocation. Use DW_FORM_udate (uleb128)
to keep the constant value as small as possible.
gas/ChangeLog:
* dwarf2dbg.c (out_debug_abbrev): When DWARF2_VERSION >= 4, use
DW_FORM_udata for DW_AT_high_pc.
(out_debug_info): Use emit_leb128_expr for DW_AT_high_pc, when
DWARF2_VERSION >= 4.
* read.c (emit_leb128_exp): No longer static.
* read.h (emit_leb128_exp): Define.
Mark Wielaard [Mon, 3 Aug 2020 00:23:44 +0000 (02:23 +0200)]
gas: Make sure .debug_line file table contains a zero filename and dir
For DWARF5 the zero file list entry in the .debug_line table represents
the compile unit main file. It can be set with .file 0 when -gdwarf-5
is given. But since this directive is illegal for older versions, this
is almost never set. To make sure it is always set (so DW_AT_name of
the compile unit can be set) use file (and dir) 1 if that is defined
(otherwise fall back to pwd, to match DW_AT_comp_dir).
gas/ChangeLog:
* gas/dwarf2dbg.c (out_dir_and_file_list): For DWARF5 emit at
least one directory if there is at least one file. Use dirs[1]
if dirs[0] is not set, or if there is no dirs[1] the current
working directory. Use files[1] filename, when files[0] filename
isn't set.
Mark Wielaard [Mon, 3 Aug 2020 00:04:17 +0000 (02:04 +0200)]
gas: Fix .debug_info CU header for --gdwarf-5
DWARF5 CU headers have a new unit type field and move the abbrev offset
to the end of the header.
gas/ChangeLog:
* dwarf2dbg.c (out_debug_info): Emit unit type and abbrev offset
for DWARF5.
* gas/testsuite/gas/elf/dwarf-4-cu.d: New file.
* gas/testsuite/gas/elf/dwarf-4-cu.s: Likewise.
* gas/testsuite/gas/elf/dwarf-5-cu.d: Likewise.
* gas/testsuite/gas/elf/dwarf-5-cu.s: Likewise.
* testsuite/gas/elf/elf.exp: Run dwarf-4-cu and dwarf-5-cu.
Tom de Vries [Tue, 4 Aug 2020 09:16:37 +0000 (11:16 +0200)]
[gdb/symtab] Handle invalid partial DIE reference
When reverting commit 9cfd2b89bd "[gdb/testsuite] Fix
gdb.arch/amd64-entry-value-paramref.S", we run into an internal-error:
...
(gdb) file amd64-entry-value-paramref^M
Reading symbols from amd64-entry-value-paramref...^M
src/gdb/dwarf2/read.c:18903: internal-error: could not find partial DIE
0x1b7 in cache [from module amd64-entry-value-paramref]^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
...
because of invalid dwarf.
In contrast, when using -readnow, we have:
...
(gdb) file -readnow amd64-entry-value-paramref
Reading symbols from amd64-entry-value-paramref...
Expanding full symbols from amd64-entry-value-paramref...
Dwarf Error: Cannot find DIE at 0x1b7 referenced from DIE at 0x11a \
[in module amd64-entry-value-paramref]
(gdb)
...
Change the internal error into a Dwarf Error, such that we have:
...
(gdb) file amd64-entry-value-paramref^M
Reading symbols from amd64-entry-value-paramref...^M
Dwarf Error: Cannot not find DIE at 0x1b7 \
[from module amd64-entry-value-paramref]^M
^M
(No debugging symbols found in amd64-entry-value-paramref)^M
(gdb)
...
John Baldwin [Mon, 3 Aug 2020 16:47:17 +0000 (09:47 -0700)]
Update FreeBSD system calls for 13.0-CURRENT.
This matches the current set of system calls in the FreeBSD head
development branch as of r363367. Some of these system calls
were also included in 12.1 release.
The MSP430 GAS option "-md" is supposed to indicate that the CRT startup
code should copy data from ROM to RAM at startup. However, this option
has no effect; GAS handles the related behaviour automatically by
looking for the presence of certain symbols in the input file.
gas/ChangeLog:
* config/tc-msp430.c (OPTION_MOVE_DATA): Remove.
(md_parse_option): Remove case for OPTION_MOVE_DATA.
(md_longopts): Remove "md" entry.
(md_show_usage): Likewise.
Tom de Vries [Mon, 3 Aug 2020 14:59:20 +0000 (16:59 +0200)]
[gdb/symtab] Ignore DW_LNE_lo_user/DW_LNE_hi_user range
When reading an exec with a .debug_line section containing a vendor-specific
extended opcode, we get:
...
$ gdb -batch -iex "set complaints 10" dw2-vendor-extended-opcode
During symbol reading: mangled .debug_line section
...
and reading of the .debug_line section is abandoned.
The vendor-specific extended opcode should be ignored, as specified in the
DWARF standard (7.1 Vendor Extensibility). [ FWIW, vendor-specific
standard opcodes are already ignored. ]
Fix this by ignoring all vendor-specific extended opcodes.
PR symtab/26333
* lib/dwarf.exp (DW_LNE_user): New proc.
* gdb.dwarf2/dw2-vendor-extended-opcode.c: New test.
* gdb.dwarf2/dw2-vendor-extended-opcode.exp: New file.
Kevin Buettner [Fri, 31 Jul 2020 03:51:40 +0000 (20:51 -0700)]
gdb.base/coremaker2.c: Fix compilation problems for x86_64 -m32 multilib
There are compilation warnings / errors when compiling coremaker2.c
for the gdb.base/corefile2.exp tests. Here's the command to use
on x86_64 linux:
make check RUNTESTFLAGS="--target_board unix/-m32" \
TESTS="gdb.base/corefile2.exp"
These are the warnings / errors - I've shortened the paths somewhat:
gdb compile failed, gdb/testsuite/gdb.base/coremaker2.c: In function 'main':
gdb/testsuite/gdb.base/coremaker2.c:106:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
106 | addr = ((unsigned long long) buf_ro + pagesize) & ~(pagesize - 1);
| ^
gdb/testsuite/gdb.base/coremaker2.c:108:15: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
108 | if (addr <= (unsigned long long) buf_ro
| ^
gdb/testsuite/gdb.base/coremaker2.c:109:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
109 | || addr >= (unsigned long long) buf_ro + sizeof (buf_ro))
| ^
gdb/testsuite/gdb.base/coremaker2.c:115:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
115 | mbuf_ro = mmap ((void *) addr, pagesize, PROT_READ,
| ^
gdb/testsuite/gdb.base/coremaker2.c:130:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
130 | addr = ((unsigned long long) buf_rw + pagesize) & ~(pagesize - 1);
| ^
gdb/testsuite/gdb.base/coremaker2.c:132:15: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
132 | if (addr <= (unsigned long long) buf_rw
| ^
gdb/testsuite/gdb.base/coremaker2.c:133:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
133 | || addr >= (unsigned long long) buf_rw + sizeof (buf_rw))
| ^
gdb/testsuite/gdb.base/coremaker2.c:139:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
139 | mbuf_rw = mmap ((void *) addr, pagesize, PROT_READ,
| ^
These were fixed by changing unsigned long long to uintptr_t.
Tested on either rawhide or Fedora 32 with architectures: x86_64,
x86_64/-m32, aarch64, s390x, and ppc64le.
gdb/testsuite/ChangeLog:
* gdb.base/coremaker2.c: Change all uses of 'unsigned long long'
to 'uintptr_t'
(inttypes.h): Include.
Kevin Buettner [Fri, 31 Jul 2020 03:09:05 +0000 (20:09 -0700)]
Fix gdb.base/corefile2.exp test case for ppc64le
It turns out that the recently added gdb.base/corefile2.exp test won't
run on ppc64le linux. The test case fails the internal checks which
ensure that a mmap'd region can be placed within the statically
allocated regions buf_rw[] and buf_ro[].
ppc64le linux apparently has 64k pages, which is much larger than
the 24k regions originally allocated for buf_rw[] and buf_ro[].
This patch increases the size of each region to 256 KiB.
Tested on either rawhide or Fedora 32 for these architectures: x86_64,
x86_64/-m32, ppc64le, aarch64, and s390x.
gdb/testsuite/ChangeLog:
* gdb.base/coremaker2.c (buf_rw): Increase size to 256 KiB.
(C5_24k): Delete.
(C5_8k, C5_64k, C5_256k): New macros.
(buf_ro): Allocate 256 KiB of initialized data.
But not all linker tests are compatible with LTO. Pass -fno-lto to CC
to disable LTO on linker tests by default. -flto is passed explicitly
to CC in linker LTO tests.
* testsuite/ld-elf/indirect.exp: Append -fno-lto to CC.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-plugin/lto.exp (no_lto): New.
Add $no_lto to build pr15146c.so.
* testsuite/lib/ld-lib.exp (at_least_gcc_version): Filter out
-Wl,xxx options.
(check_gcc_plugin_enabled): Likewise.
(run_ld_link_exec_tests): Prepend -fno-lto to $cflags.
(run_cc_link_tests): Likewise.
All of the above .o files are lto, leading to libbfd-2.35-3.fc33.so
not being found needed when loading the IR objects. That's problem
number one: We exclude IR references when deciding a shared library
is needed. See PR15146. Thus none of the libbfd.so symbols are
loaded before libiberty.a is scanned, and libbfd.so contains copies of
libiberty.a functions. We ought to be using the libbfd.so copies
rather than extracting them from the archive (an object is extracted
even to satisfy IR symbols). After lto recompilation, libbfd.so is of
course found to be needed and loaded. But that causes more problems.
The lto recompilation didn't see symbol references from libbfd.so and
variables like _xexit_cleanup are made local in the recompiled
objects. Oops, two copies of them. Finally, those silly undefined
symbols in the lto output debug files, combined with definitions in
both libbfd.so and IR objects result in IR symbols being made
dynamic.
The main fix here is to revert the PR15146 change to
elf_link_add_object_symbols.
PR 26314
* elflink.c (bfd_elf_link_record_dynamic_symbol): Don't allow
IR symbols to become dynamic.
(elf_link_add_object_symbols): Don't exclude IR symbols when
deciding whether an as-needed shared library is needed.
At first glance, the test was failing because the order of
"__init_array_start" and "__fini_array_start" weak symbols were
reversed:
$ nm -n dump.out
expected output | real output 00002104 D __init_array_start | 00002104 D __fini_array_start 0000210c D __fini_array_start | 00002104 D __init_array_start
The order of the symbols are different as a side effect of both
symbols being mapped to the _same_ address (0x2104). Looking
further into the mapping logs [1] revealed that the linker
script must consider all instances of ".init_array" (in other
words ".init_array.*") inside its relevant section. Same logic
holds for ".fini_array".
Therefore, adding "KEEP (*(SORT(.init_array.*)))" to the linker
script, along with the one for ".finit_array.*", resolved the
problem. While at it, I took the liberty of refactoring the
script a little bit and made those pieces of script macros.
[1] Linker's mapping for the relevant part of the test
---------------------------------------------------------------
.init_array 0x2104 0x0
0x2104 PROVIDE (__init_array_start = .)
*(.init_array)
[!provide] PROVIDE (__init_array_end = .)
.fini_array 0x2104 0x0
0x2104 PROVIDE (__fini_array_start = .)
*(.fini_array)
[!provide] PROVIDE (__fini_array_end = .)
H.J. Lu [Thu, 30 Jul 2020 23:13:02 +0000 (16:13 -0700)]
x86: Add {disp16} pseudo prefix
Use Prefix_XXX for pseudo prefixes. Add {disp16} pseudo prefix and
replace {disp32} pseudo prefix with {disp16} in 16-bit mode test.
Check invalid {disp16}/{disp32} pseudo prefixes.
Simon Marchi [Thu, 30 Jul 2020 18:56:08 +0000 (14:56 -0400)]
gdb: handle non-const property types in ada_modulus (PR ada/26318)
PR 26318 shows that running `maint print symbols` on an Ada binary,
compiled with an Ada distribution that includes debug info for the
standard library, triggers this assertion:
The problem is in particular when printing type
`system__object_reader__decoded_ada_name__TTdecodedSP1___XDL_0`, which
has a dynamic high bound (PROP_LOCLIST kind). When printing a concrete
value of this type, this type gets resolved to a type with a constant
high bound, so ada_modulus can return this constant value.
However, when printing the dynamic range type on its own, such as with
`maint print symbols`, the high bound is still of kind PROP_LOCLIST.
When ada_modulus tries to access the property as a const value, the
assert triggers.
There's no sensible numerical value to return in this case. Ideally,
ada_modulus would return something to the caller indicating that the
value is dynamic and therefore can't be returned as an integer. The
callers would handle it, for example `maint print symbols` would say
that the high bound of the type is dynamic.
However, this patch implements the simpler fix of returning 0 in that
case. It kind of restores the previous behavior of before we validated
the dynamic property kind in the getters, where we would just return
whatever random integer value was in `const_val`. Except now it's
consistently 0.
This is what we had before we added dynamic property getters:
gdb/breakpoint: set the condition exp after parsing the condition successfully
In 'set_breakpoint_condition', GDB resets the condition expressions
before parsing the condition input by the user. This leads to the
problem of losing the condition expressions if the new condition
does not parse successfully and is thus rejected.
For instance:
$ gdb ./test
Reading symbols from ./test...
(gdb) start
Temporary breakpoint 1 at 0x114e: file test.c, line 4.
Starting program: test
Temporary breakpoint 1, main () at test.c:4
4 int a = 10;
(gdb) break 5
Breakpoint 2 at 0x555555555155: file test.c, line 5.
Now define a condition that would evaluate to false. Next, attempt
to overwrite that with an invalid condition:
(gdb) cond 2 a == 999
(gdb) cond 2 gibberish
No symbol "gibberish" in current context.
(gdb) info breakpoints
Num Type Disp Enb Address What
2 breakpoint keep y 0x0000555555555155 in main at test.c:5
stop only if a == 999
It appears as if the bad condition is successfully rejected. But if we
resume the program, we see that we hit the breakpoint although the condition
would evaluate to false.
(gdb) continue
Continuing.
Breakpoint 2, main () at test.c:5
5 a = a + 1; /* break-here */
Fix the problem by not resetting the condition expressions before
parsing the condition input.
Suppose the fix is applied. A similar problem could occur if the
condition is valid, but has "junk" at the end. In this case, parsing
succeeds, but an error is raised immediately after. It is too late,
though; the condition expression is already updated.
For instance:
$ gdb ./test
Reading symbols from ./test...
(gdb) start
Temporary breakpoint 1 at 0x114e: file test.c, line 4.
Starting program: test
Temporary breakpoint 1, main () at test.c:4
4 int a = 10;
(gdb) break 5
Breakpoint 2 at 0x555555555155: file test.c, line 5.
(gdb) cond 2 a == 999
(gdb) cond 2 a == 10 if
Junk at end of expression
(gdb) info breakpoints
Num Type Disp Enb Address What
2 breakpoint keep y 0x0000555555555155 in main at test.c:5
stop only if a == 999
(gdb) c
Continuing.
Breakpoint 2, main () at test.c:5
5 a = a + 1; /* break-here */
(gdb)
We should not have hit the breakpoint because the condition would
evaluate to false.
Fix this problem by updating the condition expression of the breakpoint
after parsing the input successfully and checking that there is no
remaining junk.
gdb/ChangeLog:
2020-07-30 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* breakpoint.c (set_breakpoint_condition): Update the condition
expressions after checking that the input condition string parses
successfully and does not contain junk at the end.
gdb/testsuite/ChangeLog:
2020-07-30 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/condbreak-bad.exp: Extend the test with scenarios
that attempt to overwrite an existing condition with a condition
that fails parsing and also with a condition that parses fine
but contains junk at the end.
projects / thirdparty / binutils-gdb.git / log
