Kaylee Blake [Wed, 4 Mar 2020 08:48:07 +0000 (19:18 +1030)]
ELF: Strip section header in ELF objects
Section header isn't mandatory on ELF executable nor shared library.
This patch adds a new linker option, -z nosectionheader, to omit ELF
section header, a new objcopy and strip option, --strip-section-headers,
to remove ELF section headers.
bfd/
2023-06-06 H.J. Lu <hongjiu.lu@intel.com>
Kaylee Blake <klkblake@gmail.com>
Matthias Klose [Thu, 29 Jun 2023 13:30:55 +0000 (14:30 +0100)]
ignore lto-wrapper warnings for lto builds.
I see these warnings from time to time, when configuring a build with --enable-pgo-build=lto, I haven't yet found out why I see these sometime, and why not. E.g. https://gcc.gnu.org/PR109241. Just ignore these when they appear in test cases. lto-wrapper: warning: using serial compilation of N LTRANS jobs
gprofng/ChangeLog
2023-06-26 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
* Makefile.am: Pass CLOCK_GETTIME_LINK to the testsuite
* Makefile.in: Rebuild.
* testsuite/gprofng.display/gp-archive.exp: New file.
* testsuite/gprofng.display/gp-collect-app_F.exp: New file.
* testsuite/gprofng.display/setpath_map.exp: New file.
* testsuite/lib/smalltest.c: New file.
Andrew Carlotti [Wed, 28 Jun 2023 17:05:28 +0000 (18:05 +0100)]
aarch64: Remove version dependencies from features
Many instructions were enabled only when both a feature flag and a minimum
architecture version are specified. This behaviour differs from GCC, which (in
most cases) allows features to be enabled at any architecture version.
There is no need for the toolchain to restrict combinations of unrelated
features in this way, so this patch removes the unnecessary dependencies.
Michael Matz [Mon, 26 Jun 2023 15:11:31 +0000 (17:11 +0200)]
section-match: Check parent archive name as well
rewriting the section matching routines lost a special case
of matching: section statements of the form
NAME(section-glob)
normally match against NAME being an object file, but like in
the exclude list we happened to accept archive names as NAME
(undocumented). The documented way to specify (all) archive members
is by using e.g.
lib.a:(section-glob)
(that does work also with the prefix tree matcher).
But I intended to not actually change behaviour with the prefix
tree implementation. So, let's also implement checking against
archive names with a similar FIXME comment we already have in
walk_wild_file_in_exclude_list.
PR 30590
ld/
* ldlang.c (walk_wild_section_match): Also look at archive
parents for a name match.
Tom Tromey [Tue, 13 Jun 2023 15:36:35 +0000 (09:36 -0600)]
Fix handling of DW_TAG_unspecified_type for Ada
Commit 80eaec735e ("[gdb/symtab] Handle named DW_TAG_unspecified_type
DIE") changed the handling of DW_TAG_unspecified_type. Before this
change, such types were not entered into the symbol table.
It turns out that, when such a type is in the symtab, it can cause
failures in Ada. In particular, a private type in another package may
be seen locally as "void".
Now, it would probably be better to fix this via check_typedef.
However, that is somewhat difficult given the state of the DWARF
reader -- in particular with gdb_index, this would require expanding
potentially many CUs to find the correct type.
Instead, this patch changes gdb to not enter a symbol for an
unspecified type -- but only for Ada.
Tom Tromey [Tue, 13 Jun 2023 18:51:55 +0000 (12:51 -0600)]
Remove some Python 2 code
I found some Python 2 compatibility code in gdb's Python library.
There's no need for this any more, so this removes it. There is still
a bit more of this remaining in __init__.py, but I haven't tried
removing that yet.
Indu Bhagat [Tue, 27 Jun 2023 18:56:04 +0000 (11:56 -0700)]
libsframe: use uint8_t for return type of sframe_fre_get_base_reg_id
Use a more appropriate data type.
include/
* sframe-api.h (sframe_fre_get_base_reg_id): Use uint8_t as
return type.
libsframe/
* sframe-dump.c (dump_sframe_func_with_fres): Use uint8_t type
for base reg id.
* sframe.c (sframe_fre_get_base_reg_id): Use uin8_t as return
type.
Indu Bhagat [Tue, 27 Jun 2023 18:55:08 +0000 (11:55 -0700)]
libsframe: use uint32_t for fre_type and fde_type function args
The API sframe_fde_create_func_info is provided by libsframe. Current
users are the bfd linker. Adjust the argument type for the variables
carrying the SFrame FRE type and SFrame FDE type to consistenly use
uint32_t type alias.
Indu Bhagat [Tue, 27 Jun 2023 18:55:00 +0000 (11:55 -0700)]
libsframe: update the semantics of sframe_fre_get_fp_offset
Until now, sframe_fre_get_fp_offset () would return
SFRAME_ERR_FREOFFSET_NOPRESENT if the ABI uses fixed FP offset. A stack
tracer, then, would call an explicit sframe_decoder_get_fixed_fp_offset ()
to get the FP offset.
On second look, it appears to make sense to hide these details of
whether the FP offset is fixed or not in an ABI from the consumer. Now,
with the changed semantics, the call to sframe_fre_get_fp_offset () will
fetch the fixed FP offset if applicable, or get the FP offset from FRE
when there is no fixed FP offset.
This patch changes the behavior of sframe_fre_get_fp_offset (): it turns
an error into non-error. This change will be included with the next
release of libsframe, where all the exposed symbols will be versioned
with version node LIBSFRAME_1.0 for the first time.
libsframe/
* sframe.c (sframe_fre_get_fp_offset): Return the fixed offset, if
applicable. Else return the FP offset from the FRE.
Indu Bhagat [Tue, 27 Jun 2023 18:54:49 +0000 (11:54 -0700)]
libsframe: update the semantics of sframe_fre_get_ra_offset
Until now, sframe_fre_get_ra_offset () would return
SFRAME_ERR_FREOFFSET_NOPRESENT if the ABI uses fixed RA offset (e.g.,
AMD64). A stack tracer, then, will call an explicit
sframe_decoder_get_fixed_ra_offset () to get the RA offset.
On second look, it appears to make sense to hide these details of
whether the RA offset is fixed or not from the consumer. Now, with the
changed semantics, the call to sframe_fre_get_ra_offset () will fetch
the fixed RA offset if applicable, or get the RA offset from FRE when
there is no fixed RA offset.
Adjustments need to be made to ensure the textual dump remains the same
as preivous. Currently, e.g., if RA is not being tracked per FRE,
following is seen with objdump --sframe:
STARTPC CFA FP RA
000000000000NNNN sp+X u u
This patch changes the behavior of sframe_fre_get_ra_offset: it turns an
error into non-error. This change will be included with the next
release of libsframe, where all exposed symbols will be versioned for
the first time.
libsframe/
* sframe.c (sframe_fre_get_ra_offset): Return the fixed offset,
if applicable. Else return the RA offset from the FRE.
* sframe-dump.c (dump_sframe_func_with_fres): Make adjustments
to keep the textual dump same as previous.
Indu Bhagat [Tue, 27 Jun 2023 18:54:12 +0000 (11:54 -0700)]
libsframe: add symbol versioning
Define an empty base version LIBSFRAME_0.0 and add all symbols to
version LIBSFRAME_1.0.
The previous release of libsframe (libsframe.so.0) did not have
versioned symbols. Adding a libsframe.ver file so that future releases
of the library (and its consumers) can manage the changes better.
For Solaris ld, use -M mapfile command line option. libsframe does not
restrict the set of exported symbols, so at this time there is no need
to fall back on the libtool's -export-symbols option for platforms where
some other linker (with a different command line option for symbol
versioning) may be used.
libsframe/
* Makefile.am: Use symbol versioning for libsframe.
* Makefile.in: Regenerated.
* configure: Check for Solaris ld.
* configure.ac: Regenerated.
* libsframe.ver: New file.
Indu Bhagat [Tue, 27 Jun 2023 18:53:40 +0000 (11:53 -0700)]
libsframe: remove sframe_get_funcdesc_with_addr API
This is an incompatible ABI change in libsframe.
The interface provided by this function is not a healthy abstraction to
expose: the return type sframe_func_desc_entry, which is defined in
include/sframe.h (the SFrame binary format definition). This ties up
the library in a undesirable way. Most importantly, this function
should technically not be directly necessary for a stack tracer. A
stack tracer will likely only need to do a sframe_find_fre ().
Rename the API to continue to use the functionality internally in the
library. bfd/linker does not use this function.
Change the return type of the previous definition and make a note about
its planned deprecation.
include/
* sframe-api.h: Change return type of sframe_get_funcdesc_with_addr.
Add comment for intention to deprecate.
libsframe/
*sframe.c (sframe_get_funcdesc_with_addr): Change return type
and set error code. This API is deprecated.
(sframe_get_funcdesc_with_addr_internal): New definition for
internal use.
(sframe_find_fre): Use sframe_get_funcdesc_with_addr_internal
instead.
Indu Bhagat [Tue, 27 Jun 2023 18:52:43 +0000 (11:52 -0700)]
libsframe: add library versioning
lisbframe was first released with Bintuils 2.40. As the library
evolves, some changes will break the ABI. Add library versioning for
users to manage these changes.
For the next release of the library (libsframe.so.1), incompatible ABI
changes are planned. These will include:
- Deprecation of some APIs, like sframe_get_funcdesc_with_addr (), and
- Change in the contract of some APIs (e.g., return type, behavior).
In libtool-version, set the current to 1 to prepare for the upcoming
release. Reset revision and age to 0.
Add libtool-version file to EXTRA_DIST.
libsframe/
* Makefile.am: Use libtool versioning.
* Makefile.in: Regenerated.
* libtool-version: New file.
Feiyang Chen [Fri, 16 Jun 2023 03:16:10 +0000 (11:16 +0800)]
LoongArch: Support referring to FCSRs as $fcsrX
Previously, FCSRs were referred to as $rX, which seemed strange.
We refer to FCSRs as $fcsrX, which ensures compatibility with LLVM
IAS as well.
gas/ChangeLog:
* config/tc-loongarch.c:
(loongarch_fc_normal_name): New definition.
(loongarch_fc_numeric_name): New definition.
(loongarch_single_float_opcodes): Modify `movgr2fcsr` and
`movfcsr2gr`.
testsuite/gas/loongarch/float_op.d: Likewise.
testsuite/gas/loongarch/float_op.s: Likewise.
include/ChangeLog:
* opcode/loongarch.h:
(loongarch_fc_normal_name): New extern.
(loongarch_fc_numeric_name): New extern.
opcodes/ChangeLog:
* opcodes/loongarch-dis.c (loongarch_after_parse_args): Support
referring to FCSRs as $fcsrX.
* opcodes/loongarch-opc.c (loongarch_args_parser_can_match_arg_helper):
Likewise.
gdb/testsuite: Avoid infinite loop in gdb.reverse/step-reverse.exp
This testcase sometimes gets stuck in a loop for hours when running in our
CI. The problem is that due to an issue unrelated to reverse debugging the
inferior exits early, and because of the overly generic ".*" pattern the
testcase keeps sending the "next" command without noticing that the
inferior is gone.
gdb_test_multiple has a pattern to detect that "The program is not being
run.", but since it is placed after the patterns from the caller it won't
be triggered. It also has a timeout pattern but because it is triggered
between successful matches, each time the test matches the '-re -wrap ".*"'
this counts as a successful match and the timeout is reset.
Since the test binary is compiled with debug information, fix by changing
one of the generic patterns to match entering the main function and the
other one to match the source code line number that is shown by GDB right
after the "step" command.
Also, as a precaution add a maximum number of times the "next" command will
be sent.
Co-Authored-By: Tom de Vries <tdevries@suse.de> Reviewed-By: Bruno Larsen <blarsen@redhat.com> Approved-By: Tom de Vries <tdevries@suse.de>
Alan Modra [Fri, 23 Jun 2023 01:07:53 +0000 (10:37 +0930)]
[GOLD] PowerPC64 huge branch dynamic relocs
PowerPC64 gold and ld.bfd implement an indirect branch trampoline,
used when the destination of a branch exceeds a bounce through another
"b" instruction. When generating PIEs or shared libraries, the
addresses need dynamic relocations. This was implemented in gold
using a dedicated relocation section, but this means the relative
relocations for these addresses are not sorted properly with other
dynamic relative relocations: gold doesn't support merging relocation
sections, then sorting. Instead we need to use a single .rela.dyn
section.
This is done by increasing the size of rela_dyn_ during do_relax to
account for needed dynamic relocations, delaying adding the actual
relocations until the end of relaxation once the layout has
stabilised.
* powerpc.cc (Target_powerpc): Add rela_dyn_size_;
(update_current_size): New function.
(Target_powerpc::do_relax): Capture the size of rela_dyn_ at
the start of relaxation. Artifically increase its size during
relaxation to account for needed indirect branches, and add
those relocations at the end.
(Output_data_brlt_powerpc::rel_, reset_brlt_sizes),
(finalize_brlt_sizes, add_reloc, set_current_size): Delete.
(Target_powerpc::make_brlt_section): Don't make reloc section.
Alan Modra [Fri, 23 Jun 2023 00:08:13 +0000 (09:38 +0930)]
[GOLD] Support setting DT_RELACOUNT late
PowerPC gold adds relative dynamic relocs in do_relax. These aren't
accounted for in the value set in add_target_dynamic_tags, which is
called before do_relax. Provide a way of setting DT_RELCOUNT and
DT_RELACOUNT at the point where .dynamic is written.
Alan Modra [Thu, 22 Jun 2023 23:18:38 +0000 (08:48 +0930)]
[GOLD] powerpc DT_RELACOUNT
DT_RELACOUNT was calculated incorrectly, and relative relocs not
sorted as they should be to the start of .rela.dyn, due to adding one
particular class of dynamic reloc using the wrong "add" method.
* powerpc.cc (Target_powerpc::Scan::global): Add relative
dyn relocs for ADDR64 and similar using add_global_relative.
Tom Tromey [Fri, 23 Jun 2023 02:34:56 +0000 (20:34 -0600)]
Fix off-by-one error
Simon pointed out that commit a2bbca9fa5e ("Use std::vector<bool> for
agent_expr::reg_mask") caused a regression in libstdc++ debug mode.
This was due to an off-by-one error in a vector resize. This patch
fixes the problem.
Ilya Leoshkevich [Wed, 21 Jun 2023 21:55:42 +0000 (23:55 +0200)]
gdb/testsuite: fix gdb.python/py-unwind.exp with python >= 3.11
Python 3.11 changed the AttributeError message - see commit 0cb765b2cec9 ("bpo-46730: Add more info to @property AttributeError
messages (GH-31311)"). Add the new message to the expectations.
Tom de Vries [Thu, 22 Jun 2023 17:15:23 +0000 (19:15 +0200)]
[gdb/testsuite] Clean or check standard_output_file dir in gdb_init
In commit e2adba909e7 ("[gdb/testsuite] Clean up before compilation in
gdb.ada/call-no-debug.exp") I added some code in the test-case to remove some
files at the start of the test-case:
...
remote_file host delete [standard_output_file prog.o]
remote_file host delete [standard_output_file prog.ali]
...
Then in commit b7b77500dc5 ("[gdb/testsuite] Clean standard_output_file dir in
gdb_init") I tried to do this more structurally, by cleaning up the entire
standard_output_file directory, for all test-cases.
This caused a regression when using "make check -j 2", due to the cleanup
removing the active gdb.log, so I reverted the commit.
Try again, this time handling the two cases separately.
If the standard_output_file directory contains an active gdb.log, check that
the directory contains no files other than gdb.log and gdb.sum. This puts
the reponsibility for the cleanup at the callers in gdb/testsuite/Makefile.in
which use --outdir.
If the standard_output_file directory doesn't contain an active gdb.log, clean
it by removing the entire directory.
An exception is made for performance tests, where cleaning up the
standard_output_file dir is the wrong thing to do, because an invocation with
GDB_PERFTEST_MODE == run is intended to reuse binaries left there by an
earlier invocation with GDB_PERFTEST_MODE == compile.
Tested on x86_64-linux.
Suggested-By: Tom Tromey <tom@tromey.com> Reviewed-By: Tom Tromey <tom@tromey.com> Tested-By: Luis Machado <luis.machado@arm.com>
Tom Tromey [Thu, 1 Jun 2023 17:54:17 +0000 (11:54 -0600)]
Implement DAP "hover" context
A DAP client can request that an expression be evaluated in "hover"
context, meaning that it should not cause side effects. In gdb, this
can be implemented by temporarily setting a few "may-" parameters to
"off".
In order to make this work, I had to also change "may-write-registers"
so that it can be changed while the program is running. I don't think
there was any reason for this prohibition in the first place.
Tom Tromey [Wed, 31 May 2023 17:21:09 +0000 (11:21 -0600)]
Implement DAP logging breakpoints
DAP allows a source breakpoint to specify a log message. When this is
done, the breakpoint acts more like gdb's dprintf: it logs a message
but does not cause a stop.
I looked into implement this using dprintf with the new %V printf
format. However, my initial attempt at this did not work, because
when the inferior is continued, the dprintf output is captured by the
gdb.execute call. Maybe this could be fixed by having all
inferior-continuation commands use the "&" form; the main benefit of
this would be that expressions are only parsed a single time.
Tom Tromey [Fri, 26 May 2023 19:35:52 +0000 (13:35 -0600)]
Handle supportsVariablePaging in DAP
A bug report about the supportsVariablePaging capability in DAP
resulted in a clarification: when this capability is not present, DAP
implementations should ignore the paging parameters to the "variables"
request. This patch implements this clarification.
Tom Tromey [Thu, 25 May 2023 18:25:43 +0000 (12:25 -0600)]
Implement type checking for DAP breakpoint requests
I realized that with a small refactoring, it is possible to type-check
the parameters to the various DAP breakpoint requests. This would
have caught the earlier bug involving hitCondition.
Tom Tromey [Thu, 25 May 2023 17:24:39 +0000 (11:24 -0600)]
Handle exceptions when creating DAP breakpoints
When creating a DAP breakpoint, a failure should be returned by
setting "verified" to False. gdb didn't properly implement this, and
there was a FIXME comment to this effect. This patch fixes the
problem.
Tom Tromey [Wed, 24 May 2023 20:22:55 +0000 (14:22 -0600)]
Reuse breakpoints more frequently in DAP
The DAP breakpoint code tries to reuse a breakpoint when possible.
Currently it uses the condition and the hit condition (aka ignore
count) when making this determination. However, these attributes are
just going to be reset anyway, so this patch changes the code to
exclude these from the reuse decision.
Tom Tromey [Wed, 24 May 2023 20:24:13 +0000 (14:24 -0600)]
Fix type of DAP hitCondition
DAP specifies a breakpoint's hitCondition as a string, meaning it is
an expression to be evaluated. However, gdb implemented this as if it
were an integer instead. This patch fixes this oversight.
Simon Farre [Mon, 19 Jun 2023 23:27:28 +0000 (01:27 +0200)]
gdb/DAP Few bug fixes & Evaluate Array Watch vars
v2.
EvaluateResult does not need a name, just as what Tom pointed out in
previous review. It's only the *children* that need to be made sure that
their names are valid. An identifier for a variable, can't ever have an
integer as a name, anyhow (not as far as I am aware, no programming
languages allow for that).
Removed the f-strings and use str() instead as pointed out that
f-strings might not be supported fully.
v1.
This patch fixes a few bugs.
First of all, name of VariableReferences must always be of string type.
This patch makes sure that this is the case by formatting the name. If
(when) the name is an integer, this will cause clients to fail or throw
errors.
Fixes a bug in NoOpArrayPrinter that calculated children to be N, but
only ever retrieves N-1 children, which makes Python at some time later
(during fetch_children -> fetch_one_child(N) ) raise an exception (out
of list index) which makes the entire request go bad.
The result[self.result_name] also f-strings the printer.to_string()
value, because this can potentially be a LazyString (which is a Python
object, not a string) and is not serializable by json.dumps.
H.J. Lu [Tue, 20 Jun 2023 22:10:11 +0000 (15:10 -0700)]
x86: Free the symbol buffer and the relocation buffer after use
When --no-keep-memory is used, the symbol buffer and the relocation
buffer aren't cached. When packing relative relocations, we may
allocate a new symbol buffer and a new relocation buffer for each
eligible section in an object file. If there are many sections,
memory may be exhausted. In this case, we should free the symbol
buffer and the relocation buffer after use. If symbol buffer entries
are used to track relative relocations against local symbols for later
use, the symbol buffer should be cached.
PR ld/30566
* elfxx-x86.c (elf_x86_relative_reloc_record_add): Add an
argument to inform caller if the symbol buffer should be kept.
(_bfd_x86_elf_link_relax_section): Call
_bfd_elf_link_info_read_relocs instead of
_bfd_elf_link_read_relocs. Free the symbol buffer and the
relocation buffer after use. Cache the symbol buffer if it
is used.
Tom Tromey [Wed, 31 May 2023 12:27:16 +0000 (06:27 -0600)]
Add missing backslash to update-gnulib.sh
A user on irc noticed a missing backslash on one line in
update-gnulib.sh. This patch adds it.
Re-running update-gnulib.sh causes a few copyright notices to change.
Presumably these are from upstream gnulib and shouldn't be touched by
our yearly update. I've updated the script to account for this, but I
did not want to try testing it...
Tom de Vries [Wed, 21 Jun 2023 14:29:04 +0000 (16:29 +0200)]
[gdb/testsuite] Add have_host_locale
With test-case gdb.tui/pr30056.exp, I run into:
...
sh: warning: setlocale: LC_ALL: cannot change locale (C.UTF-8)^M
...
and then subsequently into:
...
WARNING: timeout in accept_gdb_output
FAIL: gdb.tui/pr30056.exp: Control-C
...
This is on a CentOS 7 distro for powerpc64le.
Either it has no C.UTF-8 support, or it's not installed:
...
$ locale -a | grep ^C
C
$
...
Fix this by:
- adding a new proc have_host_locale, and
- using it in all test-cases using setenv LC_ALL.
Tom de Vries [Wed, 21 Jun 2023 14:16:50 +0000 (16:16 +0200)]
[gdb/testsuite] Fix gdb.tui/wrap-line.exp
PR testsuite/30458 reports the following FAIL:
...
PASS: gdb.tui/wrap-line.exp: width-auto-detected: cli: wrap
^CQuit
(gdb) WARNING: timeout in accept_gdb_output
Screen Dump (size 50 columns x 24 rows, cursor at column 6, row 3):
0 Quit
1 (gdb) 7890123456789012345678901234567890123456789
2 W^CQuit
3 (gdb)
...
FAIL: gdb.tui/wrap-line.exp: width-auto-detected: cli: prompt after wrap
...
The problem is that the regexp doesn't account for the ^C:
...
gdb_assert { [Term::wait_for "^WQuit"] } "prompt after wrap"
...
The ^C occurs occasionally. This is something we'd like to fix. It's
reported as a readline problem here (
https://lists.gnu.org/archive/html/bug-readline/2023-06/msg00000.html ).
For now, fix this by updating the regexp, and likewise in another place in the
test-case where we use ^C.
In commit 0961e631575b, the fix for PR30217, make_lplt_section and
make_brlt_section were changed to use rela_dyn_ rather than their own
separate dynamic reloc sections. This fails miserably whenever brlt_
is needed for long branches, due to needing to iterate sizing and thus
reset brlt_ sizes.
PR 30536
PR 30217
* powerpc.cc (Target_powerpc::make_brlt_section): Don't use
rela_dyn_.
Say we run test-case gdb.tui/basic.exp. It calls Term::enter_tui, which does:
...
command_no_prompt_prefix "tui enable"
...
The proc command_no_prompt_prefix is documented as:
...
# As proc command, but don't wait for an initial prompt. This is used for
# initial terminal commands, where there's no prompt yet.
...
Indeed, before the "tui enable" command, the tuiterm is empty, so there is no
prompt and just before switching to TUI we have in the tuiterm:
...
tui enable
...
The reason that there is no prompt, is that:
- in order for tuiterm to show something, its input processing procs need to
be called, and
- the initial gdb prompt, and subsequent prompts generated by gdb_test-style
procs, are all consumed by those procs instead.
This is in principle not a problem, but the absence of a prompt makes a
tuiterm session look less like a session on an actual xterm.
Add a new proc gen_prompt, that:
- generates a prompt using echo
- consumes the response before the prompt using gdb_expect
- consumes the prompt using Term::wait_for "".
This allows us to reimplement Term::command_no_prompt_prefix using
Term::command, and just before switching to TUI we have in the tuiterm:
...
(gdb) tui enable
...
Tom de Vries [Wed, 21 Jun 2023 13:31:37 +0000 (15:31 +0200)]
[gdb/testsuite] Make Term::wait_for "" match only a prompt
The semantics of Term::wait_for is:
...
# Accept some output from gdb and update the screen. WAIT_FOR is
# a regexp matching the line to wait for. Return 0 on timeout, 1
# on success.
proc wait_for {wait_for} {
...
Note that besides the regexp, also a subsequent gdb prompt is matched.
I recently used wait_for "" in a few test-cases, thinking that this would
match just a prompt, but in fact that's not the case.
Fix this in wait_for, and add a corresponding test in gdb.tui/tuiterm-2.exp.
Nick Clifton [Wed, 21 Jun 2023 10:47:19 +0000 (11:47 +0100)]
For test for PR 29072 when the linker is configured with --enable-default-execstack=no.
PR 29072
* testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Always return false for linkers configured with the --enable-default-execstack=no option.
Alan Modra [Wed, 21 Jun 2023 05:03:59 +0000 (14:33 +0930)]
elf32_arm_get_synthetic_symtab memory leak
ARM get_synthetic_symtab reads .plt and caches that data. Caching the
data doesn't make a lot of sense since get_synthetic_symtab is only
called once per bfd, and the memory might be put to better use. It
also leaks on closing the bfd.
* elf32-arm.c (elf32_arm_get_synthetic_symtab): Don't cache
plt contents. Free plt data before returning.
Tom Tromey [Tue, 20 Jun 2023 17:09:18 +0000 (11:09 -0600)]
Remove aop_last
aop_last is only used for an assertion. However, due to the '.def'
construct in the sources, this assert could never plausibly trigger
(the assert predates the use of a .def file here). This patch removes
the constant and the assert.
H.J. Lu [Tue, 20 Jun 2023 16:32:19 +0000 (09:32 -0700)]
x86: Don't check if AVX512 template requires AVX512VL
If the ZMM operand in an AVX12 template also allows XMM or ZMM, this
template must require AVX512VL. Drop the AVX512VL requirement check
on such AVX512 templates.
* config/tc-i386.c (check_VecOperands): Don't check if AVX512
template requires AVX512VL.
Tom Tromey [Mon, 19 Jun 2023 04:06:05 +0000 (22:06 -0600)]
Use std::string in do_set_command
do_set_command manually updates a string, only to copy it to a
std::string and free the working copy. This patch changes this code
to use std::string for everything, simplifying the code and removing a
copy.
Tom Tromey [Fri, 9 Jun 2023 16:35:20 +0000 (10:35 -0600)]
Use unique_xmalloc_ptr for mi_parse::command
This changes mi_parse::command to be a unique_xmalloc_ptr and fixes up
all the uses. This avoids some manual memory management. std::string
is not used here due to how the Python API works -- this approach
avoids an extra copy there.
Tom Tromey [Fri, 9 Jun 2023 16:27:18 +0000 (10:27 -0600)]
Use std::string for MI token
This changes the MI "token" to be a std::string, removing some manual
memory management. It also makes current_token 'const' in order to
support this change.
Simon Farre [Wed, 20 Apr 2022 08:25:47 +0000 (10:25 +0200)]
gdb/Python: Added ThreadExitedEvent
v6:
Fix comments.
Fix copyright
Remove unnecessary test suite stuff. save_var had to stay, as it mutates
some test suite state that otherwise fails.
v5:
Did what Tom Tromey requested in v4; which can be found here: https://pi.simark.ca/gdb-patches/87pmjm0xar.fsf@tromey.com/
v4:
Doc formatting fixed.
v3:
Eli:
Updated docs & NEWS to reflect new changes. Added
a reference from the .ptid attribute of the ThreadExitedEvent
to the ptid attribute of InferiorThread. To do this,
I've added an anchor to that attribute.
Tom:
Tom requested that I should probably just emit the thread object;
I ran into two issues for this, which I could not resolve in this patch;
1 - The Thread Object (the python type) checks it's own validity
by doing a comparison of it's `thread_info* thread` to nullptr. This
means that any access of it's attributes may (probably, since we are
in "async" land) throw Python exceptions because the thread has been
removed from the thread object. Therefore I've decided in v3 of this
patch to just emit most of the same fields that gdb.InferiorThread has, namely
global_num, name, num and ptid (the 3-attribute tuple provided by
gdb.InferiorThread.ptid).
2 - A python user can hold a global reference to an exiting thread. Thus
in order to have a ThreadExit event that can provide attribute access
reliably (both as a global reference, but also inside the thread exit
handler, as we can never guarantee that it's executed _before_ the
thread_info pointer is removed from the gdbpy thread object),
the `thread_info *` thread pointer must not be null. However, this
comes at the cost of gdb.InferiorThread believing it is "valid" - which means,
that if a user holds takes a global reference to that
exiting event thread object, they can some time later do `t.switch()` at which
point GDB will 'explode' so to speak.
v2:
Fixed white space issues and NULL/nullptr stuff,
as requested by Tom Tromey.
v1:
Currently no event is emitted for a thread exit.
This adds this functionality by emitting a new gdb.ThreadExitedEvent.
It currently provides four attributes:
- global_num: The GDB assigned global thread number
- num: the per-inferior thread number
- name: name of the thread or none if not set
- ptid: the PTID of the thread, a 3-attribute tuple, identical to
InferiorThread.ptid attribute
Simon Farre [Mon, 12 Jun 2023 19:32:46 +0000 (21:32 +0200)]
gdb/dap - Getting thread names
Renamed thread_name according to convention (_ first)
When testing firefox tests, it is apparent that
_get_threads returns threads with name field = None.
I had initially thought that this was due to Firefox setting the names
using /proc/pid/task/tid/comm, by writing directly to the proc fs the
names, but apparently GDB seems to catch this, because I re-wrote
the basic-dap.exp/c to do this specifically and it saw the changes.
So I couldn't determine right now, what operation of name change that
GDB does not pick up, but with this patch, GDB will pick up the thread
names for an applications that set the name of a thread in ways that
aren't obvious.
Test-case gdb.ada/catch_ex_std.exp passes for me with package
libada7-debuginfo installed, but after removing it I get:
...
(gdb) catch exception some_kind_of_error^M
Your Ada runtime appears to be missing some debugging information.^M
Cannot insert Ada exception catchpoint in this configuration.^M
(gdb) FAIL: gdb.ada/catch_ex_std.exp: catch exception some_kind_of_error
...
The test-case contains a require gnat_runtime_has_debug_info to deal with
this, but the problem is that this checks the static gnat runtime, while this
test-case uses the shared one.
Fix this by introducing shared_gnat_runtime_has_debug_info, and requiring that
one instead.
Add template functions assign_return_if_changed and assign_set_if_changed in
gdb/utils.h:
...
template<typename T> void assign_set_if_changed (T &lval, const T &val, bool &changed)
{ ... }
template<typename T> bool assign_return_if_changed (T &lval, const T &val)
{ ... }
...
This allows us to rewrite code like this:
...
if (tui_border_attrs != entry->value)
{
tui_border_attrs = entry->value;
need_redraw = true;
}
...
into this:
...
need_redraw |= assign_return_if_changed<int> (tui_border_attrs, entry->value);
...
or:
...
assign_set_if_changed<int> (tui_border_attrs, entry->value, need_redraw);
...
The names are a composition of the functionality. The functions:
- assign VAL to LVAL, and either
- return true if the assignment changed LVAL, or
- set CHANGED to true if the assignment changed LVAL.
Andreas Schwab [Tue, 13 Jun 2023 12:49:38 +0000 (14:49 +0200)]
riscv: Use run-time endianess for floating point literals
gas/
PR binutils/30551
* config/tc-riscv.c (md_atof): Use target_big_endian instead of
TARGET_BYTES_BIG_ENDIAN.
* testsuite/gas/riscv/float-be.d: New file.
* testsuite/gas/riscv/float-le.d: New file.
* testsuite/gas/riscv/float.s: New file.
projects / thirdparty / binutils-gdb.git / log
