Jan Beulich [Wed, 12 Feb 2020 15:19:52 +0000 (16:19 +0100)]
x86: fold two JMP templates
Now that the AMD64 check in match_template() applies to 64-bit code
only, the non-64-bit and the Amd64 template can be folded, as being
otherwise compatible with one another. (Oddly enough the same doesn't
apply to CALL, due to the suffixes it permits, while JMP doesn't
allow for any.)
Jan Beulich [Wed, 12 Feb 2020 15:19:03 +0000 (16:19 +0100)]
x86-64: Intel64 adjustments for insns dealing with far pointers
AMD and Intel differ in their handling of far indirect branches as well
as LFS/LGS/LSS: AMD CPUs ignore REX.W while Intel ones honors it. (Note
how the latter three were hybrids so far, while far branches were fully
AMD-like.)
Disable gdbserver on host != target configurations
Correct fallout from commit 919adfe84092 ("Move gdbserver to top level")
and revert to not building `gdbserver' in a cross-configuration, that is
where host != target, matching the documented behaviour. We have no way
to support non-native `gdbserver', and native `gdbserver' is usually of
no use with cross-GDB of the chosen host.
gdbserver/ChangeLog:
2020-02-12 Maciej W. Rozycki <macro@wdc.com>
Pedro Alves <palves@redhat.com>
Skip building gdbserver in a cross-configuration.
* configure.srv: Set $gdbserver_host depending on whether $target
is $host. Use $gdbserver_host instead of $host.
When using configure flag --with-iconv-bin=$(which iconv), we run into:
...
gdb/charset.c: In function 'void find_charset_names()':
gdb/charset.c:821:75: error: missing sentinel in function call [-Werror=format=]
iconv_program = concat (iconv_dir.c_str(), SLASH_STRING, "iconv", NULL);
^
cc1plus: all warnings being treated as errors
...
Fix the warning.
Build and reg-tested on x86_64-linux.
2020-02-12 Lukas Durfina <ldurfina@tachyum.com>
Tom de Vries <tdevries@suse.de>
* charset.c (find_charset_names): Cast concat NULL sentinel to char *.
Jan Beulich [Wed, 12 Feb 2020 09:59:32 +0000 (10:59 +0100)]
x86: also disallow non-byte/-word registers with byte/word suffix
Along the lines of be4c5e58bd ("x86: Always disallow double word suffix
with word general register") also adjust check_{byte,word}_reg(), to make
overall behavior consistent again in this regard.
Jan Beulich [Wed, 12 Feb 2020 09:58:42 +0000 (10:58 +0100)]
x86/Intel: improve diagnostics
The diagnostics issued by check_*_reg() are pretty AT&T-centric. Re-use
logic already used for SIMD memory operand size checking also for ones
where GPRs would alternatively also be allowed. (There's certainly room
for further improvement here.)
H.J. Lu [Tue, 11 Feb 2020 23:36:13 +0000 (15:36 -0800)]
Plugin: Treat each object as independent
Since plugin treats each object as independent, we must do a fresh dlopen
of plugin for each object.
PR binutils/25355
* plugin.c (try_claim): Always clean up for LTO wrapper.
(try_load_plugin): Treat each object as independent. Create a
copy for plugin name.
New testcase for PR tui/25126 (staled source cache)
I'm dealing with a Fedora GDB bug that is related to PR tui/25126, and
I thought I'd write a specific testcase for it because I couldn't find
one.
The idea is to get the simple reproducer from the bug and tweak the
testcase around it. This one was a bit hard because, since we need to
modify the source file and recompile it, it involved a bit of TCL-foo
to do things. Also for this reason, I'm only enabling the test for
native boards.
I tested this with an upstream GDB and made sure everything is
passing. I also tested with a faulty GDB and made sure the test
failed.
Simon Marchi [Tue, 11 Feb 2020 15:51:49 +0000 (10:51 -0500)]
Add -Wstrict-null-sentinel to gdbsupport/warning.m4
Commit 85f0dd3ce ("[gdb] Fix -Wstrict-null-sentinel warnings") fixed
some violations of -Wstrict-null-sentinel. If we want to enforce this
warning, I think we should enable it in our warning.m4 file.
Simon Marchi [Tue, 11 Feb 2020 15:51:43 +0000 (10:51 -0500)]
Move gdb/warning.m4 to gdbsupport
This file is used by gdbsupport, gdbserver and gdb, so I think it
belongs in gdbsupport. Move it there and update the references the
various acinclude.m4 files.
Simon Marchi [Tue, 11 Feb 2020 15:46:23 +0000 (10:46 -0500)]
gdbsupport: use AM_GDB_WARNINGS
Since gdbsupport has been given its own build system, it is no longer
compiled with the warning flags specified in gdb/warning.m4.
This patch makes it use AM_GDB_WARNINGS.
gdbsupport/ChangeLog:
* acinclude.m4: Include ../gdb/warning.m4.
* configure.ac: Use AM_GDB_WARNINGS.
* Makefile.am: Set AM_CFLAGS to WARN_CFLAGS and WERROR_CFLAGS.
* Makefile.in: Re-generate.
* configure: Re-generate.
Tom Tromey [Tue, 11 Feb 2020 14:05:28 +0000 (07:05 -0700)]
Remove some ui_file_* functions
This removes ui_file_isatty, ui_file_read, ui_file_write,
ui_file_write_async_safe, ui_file_flush, and ui_file_puts, replacing
them with calls to the appropriate method instead.
gdb/ChangeLog
2020-02-11 Tom Tromey <tromey@adacore.com>
Tom de Vries [Tue, 11 Feb 2020 06:08:33 +0000 (07:08 +0100)]
[gdb/testsuite] Fix UNRESOLVED in gdb.server/server-kill-python.exp
The test-case gdb.server/server-kill-python.exp runs fine by itself:
...
Running src/gdb/testsuite/gdb.server/server-kill-python.exp ...
=== gdb Summary ===
nr of expected passes 3
...
But if we run f.i. gdb.server/file-transfer.exp before it, we get instead:
...
Running src/gdb/testsuite/gdb.server/server-kill-python.exp ...
ERROR: GDB process no longer exists
=== gdb Summary ===
nr of expected passes 13
nr of unresolved testcases 1
...
We can see the origin of the problem here:
...
spawn gdbserver --once localhost:2347 \
build/gdb/testsuite/outputs/gdb.server/file-transfer/file-transfer \
build/gdb/testsuite/outputs/gdb.server/server-kill-python/server-kill-python^M
Process build/gdb/testsuite/outputs/gdb.server/file-transfer/file-transfer
\ created; pid = 9464^M
Listening on port 2347^M
...
The spawn of the gdbserver for the server-kill-python test-case gets as
executable argument the file-transfer binary.
This is caused by proc gdbserver_spawn attempting to load the exec file in
$file_last_loaded. This is something that is meant to load the same exec in
the gdbserver that was earlier loaded into gdb.
In this test-case however, nothing has been loaded into gdb by the test-case,
and consequently we load the file that was loaded into gdb in the previous
test-case.
Fix this by unsetting $file_last_loaded in gdb_init.
H.J. Lu [Tue, 11 Feb 2020 03:01:42 +0000 (19:01 -0800)]
Use GCC LTO wrapper to get real symbols from LTO IR objects
GCC LTO wrapper is needed to extract real symbols from LTO IR objects.
This patch does the following:
1. Set up GCC LTO wrapper for each LTO IR object.
2. Run GCC LTO wrapper to get the real object.
3. Extract symbol info from the real object.
4. Cleanup afterwards.
bfd/
PR binutils/25355
* configure.ac (HAVE_EXECUTABLE_SUFFIX): New AC_DEFINE.
(EXECUTABLE_SUFFIX): Likewise.
* config.in: Regenerated.
* configure: Likewise.
* plugin.c (bfd_plugin_close_and_cleanup): Removed.
(plugin_list_entry): Add all_symbols_read, cleanup_handler,
gcc, lto_wrapper, resolution_file, resolution_option, gcc_env,
real_bfd, real_nsyms, real_syms, lto_nsyms and lto_syms.
(get_lto_wrapper): New.
(setup_lto_wrapper_env): Likewise.
(current_plugin): Likewise.
(register_all_symbols_read): Likewise.
(register_cleanup): Likewise.
(get_symbols): Likewise.
(add_input_file): Likewise.
(bfd_plugin_close_and_cleanup): Likewise.
(claim_file): Removed.
(register_claim_file): Set current_plugin->claim_file.
(add_symbols): Make a copy of LTO symbols. Set lto_nsyms and
lto_syms in current_plugin.
(try_claim): Use current_plugin->claim_file. Call LTO plugin
all_symbols_read handler. Copy real symbols to plugin_data.
Call LTO plugin cleanup handler. Clean up for LTO wrapper.
(try_load_plugin): Don't reuse the previous plugin for LTO
wrapper. Set up GCC LTO wrapper if possible. Don't set
plugin_list_iter->claim_file.
(bfd_plugin_canonicalize_symtab): Use real LTO symbols if
possible.
* plugin.h (plugin_data_struct): Add real_bfd, real_nsyms and
real_syms.
ld/
PR binutils/25355
* testsuite/ld-plugin/lto.exp: Run PR binutils/25355 test.
* testsuite/ld-plugin/pr25355.c: New file.
* testsuite/ld-plugin/pr25355.d: Likewise.
* testsuite/lib/ld-lib.exp (run_cc_link_tests): Support compile
only dump.
MSP430: Enable relaxation of jump instructions to hard-coded pcrel offsets
This patch fixes execution failures which occur when the BR in a
sequence such as:
J<cond> 1f
BR
1:
is relaxed to a JMP, and the pc-relative offset for the destination of
the J<cond> instruction is hard-coded to be 2 words ahead of the
instruction.
The hard-coded offset will cause execution to jump 1 word ahead of where
it should actually go.
Instead we now detect the hard-coded offset is one we inserted earlier,
and invert the condition, allowing us to remove the BR entirely.
bfd/ChangeLog:
2020-02-10 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* elf32-msp430.c (msp430_elf_relax_section): Before relaxing a branch,
check if previous instruction matches a conditional jump inserted
earlier. Invert conditional jump and delete branch in this case.
MSP430: Enable relaxation of relocs in JMP instructions
This patch fixes relocation overflows caused by an inability to relax
unconditional JMP instructions to BR instructions.
bfd/ChangeLog:
2020-02-10 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* elf32-msp430.c (msp430_elf_relax_add_two_words): Rename to
msp430_elf_relax_add_words. Support insertion of either one or two
words.
(msp430_elf_relax_section): Catch opcode of 0x3c00 when relocation
needs to be grown. Handle insertion of branch instruction to replace
jump.
[binutils][arm] Implement Custom Datapath Extensions for MVE
Here we implement the custom datapath extensions for MVE.
This required the following changes:
- Adding a new register argument type (that takes either an MVE vector or
a Neon S or D register).
- Adding two new immediate operands types (0-127 and 0-4095).
- Using the Neon type machinery to distinguish between instruction
types. This required the introduction of new neon shapes to account
for the coprocessor operands to these instructions.
- Adding a new disassembly character to `print_insn_cde` to handle the
new register types.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (NEON_MAX_TYPE_ELS): Increment to account for
instructions that can have 5 arguments.
(enum operand_parse_code): Add new operands.
(parse_operands): Account for new operands.
(S5): New macro.
(enum neon_shape_el): Introduce P suffixes for coprocessor.
(neon_select_shape): Account for P suffix.
(LOW1): Move macro to global position.
(HI4): Move macro to global position.
(vcx_assign_vec_d): New.
(vcx_assign_vec_m): New.
(vcx_assign_vec_n): New.
(enum vcx_reg_type): New.
(vcx_get_reg_type): New.
(vcx_size_pos): New.
(vcx_vec_pos): New.
(vcx_handle_shape): New.
(vcx_ensure_register_in_range): New.
(vcx_handle_register_arguments): New.
(vcx_handle_insn_block): New.
(vcx_handle_common_checks): New.
(do_vcx1): New.
(do_vcx2): New.
(do_vcx3): New.
* testsuite/gas/arm/cde-missing-fp.d: New test.
* testsuite/gas/arm/cde-missing-fp.l: New test.
* testsuite/gas/arm/cde-missing-mve.d: New test.
* testsuite/gas/arm/cde-missing-mve.l: New test.
* testsuite/gas/arm/cde-mve-or-neon.d: New test.
* testsuite/gas/arm/cde-mve-or-neon.s: New test.
* testsuite/gas/arm/cde-mve.s: New test.
* testsuite/gas/arm/cde-warnings.l:
* testsuite/gas/arm/cde-warnings.s:
* testsuite/gas/arm/cde.d:
* testsuite/gas/arm/cde.s:
opcodes/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
[binutils][arm] arm support for ARMv8.m Custom Datapath Extension
This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.
This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.
The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags. This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.
We introduce a new IT block state to indicate the behaviour of these
instructions. This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them. Hence
we need to mark an instruction as allowed in either position.
We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.
include/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.
opcodes/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.
H.J. Lu [Mon, 10 Feb 2020 16:37:22 +0000 (08:37 -0800)]
x86: Accept Intel64 only instruction by default
Commit d835a58baae720 disabled sysenter/sysenter in 64-bit mode by
default. By default, assembler should accept common, Intel64 only
and AMD64 ISAs since there are no conflicts.
gas/
PR gas/25516
* config/tc-i386.c (intel64): Renamed to ...
(isa64): This.
(match_template): Accept Intel64 only instruction by default.
(i386_displacement): Updated.
(md_parse_option): Updated.
* c-i386.texi: Update -mamd64/-mintel64 documentation.
* testsuite/gas/i386/i386.exp: Run x86-64-sysenter. Pass
-mamd64 to x86-64-sysenter-amd.
* testsuite/gas/i386/x86-64-sysenter.d: New file.
opcodes/
PR gas/25516
* i386-gen.c (opcode_modifiers): Replace AMD64 and Intel64
with ISA64.
* i386-opc.h (AMD64): Removed.
(Intel64): Likewose.
(AMD64): New.
(INTEL64): Likewise.
(INTEL64ONLY): Likewise.
(i386_opcode_modifier): Replace amd64 and intel64 with isa64.
* i386-opc.tbl (Amd64): New.
(Intel64): Likewise.
(Intel64Only): Likewise.
Replace AMD64 with Amd64. Update sysenter/sysenter with
Cpu64 and Intel64Only. Remove AMD64 from sysenter/sysenter.
* i386-tbl.h: Regenerated.
Aaron Merey [Mon, 10 Feb 2020 15:24:57 +0000 (15:24 +0000)]
More debuginfod tests fixes.
Start server before setting environment variable.
Specify tmpdir as the location of the server's
database.
Check additional server metrics at start-up.
Tom de Vries [Mon, 10 Feb 2020 12:22:09 +0000 (13:22 +0100)]
[gdb/testsuite] Skip multi-target.exp without gdbserver
Pre-commit 919adfe840 "Move gdbserver to top level", if we build gdb with
--disable-gdbserver, and run test-case gdb.multi/multi-target.exp, we run
into:
...
(gdb) PASS: gdb.multi/multi-target.exp: continue: non-stop=off: set remote-exec file in inferior 2
spawn of --once --multi localhost:2346 failed
ERROR: tcl error sourcing /data/gdb_versions/devel/src/gdb/testsuite/gdb.multi/multi-target.exp.
ERROR: Timeout waiting for gdbserver response.
...
Fix this by using skip_gdbserver_tests in multi-target.exp.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-02-10 Tom de Vries <tdevries@suse.de>
* gdb.multi/multi-target.exp: Skip if skip_gdbserver_tests.
GDB/testsuite: Fix a catastrophic step-over-no-symbols.exp failure
Fix a catastrophic failure in gdb.base/step-over-no-symbols.exp where
remote target communication issues cause the value of the PC retrieved
to be empty:
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: stepi
p /x $pc
Remote 'g' packet reply is too long (expected 264 bytes, got 532 bytes): 00000000000000002a6f61551500000080faffff3f0000000028010000000000b03857551500000060ad5f5515000000906e615515000000802401000000000090faffff3f00000000000000000000000100000000000000e8fbffff3f000000f8fbffff3f0000000000000000000000b8faffff3f0000008a05010000000000589c6f551500000056424d40435c2f7c1809575515000000f0e0baaa2a0000000000000000000000f0ffbaaa2a000000f0e0baaa2a0000006804baaa2a000000000000000000000000000000000000007053baaa2a0000008252b2aa2a00000090fe01000000000048e056551500000004000000000000004000000000000000920501000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000xxxxxxxxxxxxxxxx00000000
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC
ERROR: tcl error sourcing .../gdb/testsuite/gdb.base/step-over-no-symbols.exp.
ERROR: missing operand at _@_
in expression " _@_!= "
(parsing expression " != ")
invoked from within
"expr $before_addr != $after_addr"
("uplevel" body line 1)
invoked from within
"uplevel 1 expr $condition"
(procedure "gdb_assert" line 6)
invoked from within
"gdb_assert {$before_addr != $after_addr} "advanced""
(procedure "test_step_over" line 36)
invoked from within
"test_step_over $displaced"
("uplevel" body line 2)
invoked from within
"uplevel 1 $body"
invoked from within
"with_test_prefix "displaced=$displaced" {
test_step_over $displaced
}"
("foreach" body line 6)
invoked from within
"foreach displaced { "off" "on" "auto" } {
if { $displaced != "off" && ![support_displaced_stepping] } {
continue
}
with_test_prefix "dis..."
(file ".../gdb/testsuite/gdb.base/step-over-no-symbols.exp" line 84)
invoked from within
"source .../gdb/testsuite/gdb.base/step-over-no-symbols.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source .../gdb/testsuite/gdb.base/step-over-no-symbols.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
Remote debugging from host xxx.xxx.xxx.xxx, port 47130
monitor exit
Killing process(es): 1092
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb)
To do so verify first, before making an arithmetic comparison, that the
values to compare are actually integers (using a string comparison would
result in a false PASS if both operands were empty, as in this case),
making the test script proceed normally:
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: stepi
p /x $pc
Remote 'g' packet reply is too long (expected 264 bytes, got 532 bytes): 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
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC
FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: advanced
Remote debugging from host xxx.xxx.xxx.xxx, port 48404
monitor exit
Killing process(es): 1795
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb)
Note the double curly braces, to take advantage of `&&' operator's lazy
evaluation.
gdb/testsuite/
* gdb.base/step-over-no-symbols.exp: Verify that $before_addr
and $after_addr are both integers before making a comparison.
Alan Modra [Thu, 6 Feb 2020 14:12:45 +0000 (00:42 +1030)]
gas: error for section type, attr, or entsize change
* config/obj-elf.c (obj_elf_change_section): Error for section
type, attr or entsize changes in assembly.
* testsuite/gas/elf/elf.exp: Pass -Z to gas for section5 test.
* testsuite/gas/elf/section5.l: Update.
Alan Modra [Mon, 10 Feb 2020 00:57:16 +0000 (11:27 +1030)]
gas -Z flag
-Z is supposed to "generate object file even after errors". It
doesn't do so at the moment, unless you count a zero length object
file as useful output. Fixed for most targets as follows.
I suspect avr and pru need target patches.
* output-file.c (output_file_close): Do a normal close when
flag_always_generate_output.
* write.c (write_object_file): Don't stop output when
flag_always_generate_output.
Tom de Vries [Sun, 9 Feb 2020 12:32:26 +0000 (13:32 +0100)]
[gdb] Mention CU offset for <artifical> if verbose
Say we're debugging a test-case with CUs with name "<artificial>", meaning
not originating from a single file compilation, and use the verbose setting:
...
$ gdb -iex "set verbose on" -batch cc1
Reading symbols from cc1...
Reading in symbols for <artificial>... \
and /tmp/trunk/gcc/attribs.c... \
...
and /tmp/trunk/gcc/tree-ssa-reassoc.c... \
done.
...
From the "/tmp/trunk/gcc/attribs.c" message, it's clear which CU is loaded. But
that's not the case for the "<artificial>" message.
The message uses the filename field of struct partial_symtab, which is
documented like this:
...
/* Name of the source file which this partial_symtab defines,
or if the psymtab is anonymous then a descriptive name for
debugging purposes, or "". It must not be NULL. */
...
So, fix this by setting the filename field to a more descriptive name than
"<artificial>", by appending the CU offset.
This way, we print instead:
...
$ gdb -iex "set verbose on" -batch cc1
Reading symbols from cc1...
Reading in symbols for <artificial>@0x41146d9 \
and /tmp/trunk/gcc/attribs.c... \
... \
and /tmp/trunk/gcc/tree-ssa-reassoc.c... \
done.
...
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-02-09 Tom de Vries <tdevries@suse.de>
* dwarf2read.c (process_psymtab_comp_unit_reader): Append CU offset to
filename if it matches "<artificial>".
Tom de Vries [Sun, 9 Feb 2020 12:30:03 +0000 (13:30 +0100)]
[gdb/testsuite] Capture many-headers.exp progress and output in gdb.log
When running test-case gdb.base/many-headers.exp, we have test output on
stdout/stderr:
...
Running src/gdb/testsuite/gdb.base/many-headers.exp ...
[New LWP 759]
Core was generated by `outputs/gdb.base/many-headers/many'.
Program terminated with signal SIGSEGV, Segmentation fault.
\#0 0x0000000000400688 in ?? ()
=== gdb Summary ===
nr of expected passes 1
...
Furthermore, the only trace in gdb.log that we have of the gdb command issued
is:
...
PASS: gdb.base/many-headers.exp: read core file
...
Fix this by echoing the gdb command in gdb.log, and capturing the
command output and pasting it into gdb.log:
...
( ulimit -s 4096; \
gdb -nw -nx -data-directory data-directory -batch -core=many-headers.core )
[New LWP 1542]
Core was generated by `many'.
Program terminated with signal SIGSEGV, Segmentation fault.
\#0 0x0000000000400688 in ?? ()
PASS: gdb.base/many-headers.exp: read core file
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-02-09 Tom de Vries <tdevries@suse.de>
* gdb.base/many-headers.exp: Echo gdb command to gdb.log. Capture gdb
command output and paste it into gdb.log. If any, paste catch message
to gdb.log.
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Remove "keep" parameter from cutu_reader constructor
cutu_reader has a "keep" parameter, which is used to decide what to do
with a new CU when the reader is destroyed. Most code does not try to
preserve the CU, so this patch removes this parameter and instead adds
a new method that users can call to preserve the CU on the chain.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Simplify "want_partial_unit" handling
This changes the "want_partial_unit" parameters to have type bool, and
also removes the parameter from process_psymtab_comp_unit_reader.
This latter change seemed like an improvement, because it avoids a
pointless function call in the case where we are not planning to read
a partial unit.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (process_psymtab_comp_unit_reader): Remove
"want_partial_unit" parameter.
(process_psymtab_comp_unit): Change want_partial_unit to bool.
Inline check for DW_TAG_partial_unit.
(dwarf2_build_psymtabs_hard, scan_partial_symbols): Update.
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Create dwarf2/comp-unit.[ch]
This creates the new files dwarf2/comp-unit.[ch], moving
comp_unit_head and helpers to those files. A couple of functions are
turned into methods, because it was convenient to do so now.
2020-02-08 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_SFILES): Add dwarf2/comp-unit.c.
* dwarf2/read.c (struct comp_unit_head): Move to
dwarf2/comp-unit.h.
(enum class rcuh_kind): Move to comp-unit.h.
(get_cu_length, offset_in_cu_p): Now methods on comp_unit_head.
(read_comp_unit_head, error_check_comp_unit_head)
(read_and_check_comp_unit_head): Move to comp-unit.c.
(read_offset, dwarf_unit_type_name): Likewise.
(create_debug_type_hash_table, read_cutu_die_from_dwo)
(cutu_reader::cutu_reader, read_call_site_scope)
(find_partial_die, follow_die_offset): Update.
* dwarf2/comp-unit.h: New file, from dwarf2read.c.
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Move read_offset_1 to leb.c
This moves read_offset_1 to leb.c, as it is a low-level data-reading
function. It is also renamed to remove the "_1", because gdb can use
overloading now, and this is clearer.
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Minor simplification in abbrev_table::read
abbrev_table::read increments cur_abbrev->num_attrs in the inner loop,
but there's no need to do this, as the information is already stored
in the temporary vector.
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Change dwp_file to use htab_up
This changes dwp_file to use htab_up for the loaded_cus and loaded_tus
members. This lets us avoid allocating the contents of these hash
tables on the objfile obstack.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (struct dwp_file) <loaded_cus, loaded_tus>: Now
htab_up.
(lookup_dwo_unit_in_dwp): Update.
(allocate_dwp_loaded_cutus_table): Return htab_up. Don't allocate
on obstack.
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Change dwarf2_per_objfile::type_unit_groups to htab_up
This changes dwarf2_per_objfile::type_unit_groups to be an htab_up,
again allowing us to move the memory used by the hash table from the
objfile obstack to the heap.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (allocate_type_unit_groups_table): Return
htab_up. Don't allocate on obstack.
(get_type_unit_group, dwarf2_build_psymtabs_hard): Update.
* dwarf2/read.h (struct dwarf2_per_objfile) <type_unit_groups>:
Change type to htab_up.
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Change dwarf2_per_objfile::signatured_types to be htab_up
This changes dwarf2_per_objfile::signatured_types to be an htab_up.
This in turn lets us change it not to use the objfile obstack for
allocation; obstack allocation for hash tables is a bad practice
because it leads to excess memory use if the table is ever resized.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (struct dwarf2_per_objfile) <signatured_types>:
Change type to htab_up.
* dwarf2/read.c (create_signatured_type_table_from_index)
(create_signatured_type_table_from_debug_names)
(create_all_type_units, add_type_unit)
(lookup_dwo_signatured_type, lookup_signatured_type)
(process_skeletonless_type_unit): Update.
(create_debug_type_hash_table, create_debug_types_hash_table):
Change type of types_htab.
(allocate_signatured_type_table, allocate_dwo_unit_table): Return
htab_up. Don't allocate on obstack.
(create_cus_hash_table): Change type of cus_htab parameter.
(struct dwo_file) <cus, tus>: Now htab_up.
(lookup_dwo_signatured_type, lookup_dwo_cutu)
(process_dwo_file_for_skeletonless_type_units, lookup_dwo_cutu)
(queue_and_load_all_dwo_tus): Update.
* dwarf2/index-write.c (write_gdbindex): Update.
(write_debug_names): Update.
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Remove DWARF queue-related globals
This removes some queue-related globals from the DWARF reader, in
favor of a new member on dwarf2_per_objfile. Globals must be avoided
in this code, because they prevent multi-threading the reader.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (struct dwarf2_queue_item): Move from
dwarf2/read.c. Remove "next" member. Add constructor ntad
destructor.
(struct dwarf2_per_objfile) <queue>: New member.
* dwarf2/read.c (struct dwarf2_queue_item): Move to
dwarf2/read.h.
(dwarf2_queue, dwarf2_queue_tail): Remove.
(class dwarf2_queue_guard): Add parameter to constructor. Use
DISABLE_COPY_AND_ASSIGN.
<m_per_objfile>: New member.
<~dwarf2_queue_guard>: Rewrite.
(dw2_do_instantiate_symtab, queue_comp_unit, process_queue):
Update.
(~dwarf2_queue_item): New.
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Introduce die_info::has_children
Many functions take a "has_children" parameter (either as an in- or
out-parameter). However, it seems to me that it makes more sense to
have "has_children" be an attribute of a DIE. Making this change
allows this parameter to be eliminated in many places.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Change attr_form_is_block to be a method
This changes attr_form_is_block to be a method. This is done
separately because, unlike the other attribute functions,
attr_form_is_block had special handling for the case where the
argument was NULL. This required auditing each call site; in most
cases, NULL was already ruled out, but in a few spots, an additional
check was needed.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
Tom Tromey [Sat, 8 Feb 2020 20:40:54 +0000 (13:40 -0700)]
Change section functions to be methods of dwarf2_section_info
This changes various section-related functions to be methods on
dwarf2_section_info. I think this clarifies the role of these
functions. This also changes one such function to return bool.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
Iain Buclaw [Wed, 5 Feb 2020 11:45:13 +0000 (12:45 +0100)]
Make fputs_unfiltered use fputs_maybe_filtered
This patch redefines fputs_unfiltered in utils.c, with new behavior to
forward parameters to fputs_maybe_filtered. This makes
fputs_unfiltered identical to fputs_filtered, except filtering is
disabled.
Some callers of fputs_unfiltered have been updated to use ui_file_puts
where they were using other ui_file_* functions anyway for IO.
This fixes the problem I saw with \032\032post-prompt annotation being
flushed to stdout in the wrong order.
Iain Buclaw [Wed, 5 Feb 2020 11:25:09 +0000 (12:25 +0100)]
Make gdb_flush also flush the wrap buffer
This changes gdb_flush to also flush the internal wrap buffer. A few
places needed to continue using the previous approach, so this also
introduces ui_file_flush for those.
Tom Tromey [Sun, 15 Dec 2019 14:37:06 +0000 (07:37 -0700)]
Move gdbserver to top level
This patch moves gdbserver to the top level.
This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport. Changing this will
be done in a separate patch.
[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score. This makes
sense, because there is apparently not actually a gdbserver port here.
[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.
[v4] This version adds documentation and removes some unnecessary
top-level dependencies.
[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.
Tested by the buildbot.
ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.
gdb/ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
Add support for the GBZ80 and Z80N variants of the Z80 architecture, and add DWARF debug info support to the Z80 assembler.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
projects / thirdparty / binutils-gdb.git / log
