Update documentation.

[thirdparty/cups.git] / locale / cups.strings

"\t\t(all)" = "\t\t(all)";
"\t\t(none)" = "\t\t(none)";
"\t%d entries" = "\t%d entries";
"\t%s" = "\t%s";
"\tAfter fault: continue" = "\tAfter fault: continue";
"\tAlerts: %s" = "\tAlerts: %s";
"\tBanner required" = "\tBanner required";
"\tCharset sets:" = "\tCharset sets:";
"\tConnection: direct" = "\tConnection: direct";
"\tConnection: remote" = "\tConnection: remote";
"\tContent types: any" = "\tContent types: any";
"\tDefault page size:" = "\tDefault page size:";
"\tDefault pitch:" = "\tDefault pitch:";
"\tDefault port settings:" = "\tDefault port settings:";
"\tDescription: %s" = "\tDescription: %s";
"\tForm mounted:" = "\tForm mounted:";
"\tForms allowed:" = "\tForms allowed:";
"\tInterface: %s.ppd" = "\tInterface: %s.ppd";
"\tInterface: %s/ppd/%s.ppd" = "\tInterface: %s/ppd/%s.ppd";
"\tLocation: %s" = "\tLocation: %s";
"\tOn fault: no alert" = "\tOn fault: no alert";
"\tPrinter types: unknown" = "\tPrinter types: unknown";
"\tStatus: %s" = "\tStatus: %s";
"\tUsers allowed:" = "\tUsers allowed:";
"\tUsers denied:" = "\tUsers denied:";
"\tdaemon present" = "\tdaemon present";
"\tno entries" = "\tno entries";
"\tprinter is on device '%s' speed -1" = "\tprinter is on device ‘%s’ speed -1";
"\tprinting is disabled" = "\tprinting is disabled";
"\tprinting is enabled" = "\tprinting is enabled";
"\tqueued for %s" = "\tqueued for %s";
"\tqueuing is disabled" = "\tqueuing is disabled";
"\tqueuing is enabled" = "\tqueuing is enabled";
"\treason unknown" = "\treason unknown";
"\n    DETAILED CONFORMANCE TEST RESULTS" = "\n    DETAILED CONFORMANCE TEST RESULTS";
"                          Ignore specific warnings." = "                          Ignore specific warnings.";
"                          Issue warnings instead of errors." = "                          Issue warnings instead of errors.";
"                REF: Page 15, section 3.1." = "                REF: Page 15, section 3.1.";
"                REF: Page 15, section 3.2." = "                REF: Page 15, section 3.2.";
"                REF: Page 19, section 3.3." = "                REF: Page 19, section 3.3.";
"                REF: Page 20, section 3.4." = "                REF: Page 20, section 3.4.";
"                REF: Page 27, section 3.5." = "                REF: Page 27, section 3.5.";
"                REF: Page 42, section 5.2." = "                REF: Page 42, section 5.2.";
"                REF: Pages 16-17, section 3.2." = "                REF: Pages 16-17, section 3.2.";
"                REF: Pages 42-45, section 5.2." = "                REF: Pages 42-45, section 5.2.";
"                REF: Pages 45-46, section 5.2." = "                REF: Pages 45-46, section 5.2.";
"                REF: Pages 48-49, section 5.2." = "                REF: Pages 48-49, section 5.2.";
"                REF: Pages 52-54, section 5.2." = "                REF: Pages 52-54, section 5.2.";
"        %-39.39s %.0f bytes" = "        %-39.39s %.0f bytes";
"        PASS    Default%s" = "        PASS    Default%s";
"        PASS    DefaultImageableArea" = "        PASS    DefaultImageableArea";
"        PASS    DefaultPaperDimension" = "        PASS    DefaultPaperDimension";
"        PASS    FileVersion" = "        PASS    FileVersion";
"        PASS    FormatVersion" = "        PASS    FormatVersion";
"        PASS    LanguageEncoding" = "        PASS    LanguageEncoding";
"        PASS    LanguageVersion" = "        PASS    LanguageVersion";
"        PASS    Manufacturer" = "        PASS    Manufacturer";
"        PASS    ModelName" = "        PASS    ModelName";
"        PASS    NickName" = "        PASS    NickName";
"        PASS    PCFileName" = "        PASS    PCFileName";
"        PASS    PSVersion" = "        PASS    PSVersion";
"        PASS    PageRegion" = "        PASS    PageRegion";
"        PASS    PageSize" = "        PASS    PageSize";
"        PASS    Product" = "        PASS    Product";
"        PASS    ShortNickName" = "        PASS    ShortNickName";
"        WARN    %s has no corresponding options." = "        WARN    %s has no corresponding options.";
"        WARN    %s shares a common prefix with %s\n                REF: Page 15, section 3.2." = "        WARN    %s shares a common prefix with %s\n                REF: Page 15, section 3.2.";
"        WARN    Duplex option keyword %s may not work as expected and should be named Duplex.\n                REF: Page 122, section 5.17" = "        WARN    Duplex option keyword %s may not work as expected and should be named Duplex.\n                REF: Page 122, section 5.17";
"        WARN    File contains a mix of CR, LF, and CR LF line endings." = "        WARN    File contains a mix of CR, LF, and CR LF line endings.";
"        WARN    LanguageEncoding required by PPD 4.3 spec.\n                REF: Pages 56-57, section 5.3." = "        WARN    LanguageEncoding required by PPD 4.3 spec.\n                REF: Pages 56-57, section 5.3.";
"        WARN    Line %d only contains whitespace." = "        WARN    Line %d only contains whitespace.";
"        WARN    Manufacturer required by PPD 4.3 spec.\n                REF: Pages 58-59, section 5.3." = "        WARN    Manufacturer required by PPD 4.3 spec.\n                REF: Pages 58-59, section 5.3.";
"        WARN    Non-Windows PPD files should use lines ending with only LF, not CR LF." = "        WARN    Non-Windows PPD files should use lines ending with only LF, not CR LF.";
"        WARN    Obsolete PPD version %.1f.\n                REF: Page 42, section 5.2." = "        WARN    Obsolete PPD version %.1f.\n                REF: Page 42, section 5.2.";
"        WARN    PCFileName longer than 8.3 in violation of PPD spec.\n                REF: Pages 61-62, section 5.3." = "        WARN    PCFileName longer than 8.3 in violation of PPD spec.\n                REF: Pages 61-62, section 5.3.";
"        WARN    PCFileName should contain a unique filename.\n                REF: Pages 61-62, section 5.3." = "        WARN    PCFileName should contain a unique filename.\n                REF: Pages 61-62, section 5.3.";
"        WARN    Protocols contains PJL but JCL attributes are not set.\n                REF: Pages 78-79, section 5.7." = "        WARN    Protocols contains PJL but JCL attributes are not set.\n                REF: Pages 78-79, section 5.7.";
"        WARN    Protocols contains both PJL and BCP; expected TBCP.\n                REF: Pages 78-79, section 5.7." = "        WARN    Protocols contains both PJL and BCP; expected TBCP.\n                REF: Pages 78-79, section 5.7.";
"        WARN    ShortNickName required by PPD 4.3 spec.\n                REF: Pages 64-65, section 5.3." = "        WARN    ShortNickName required by PPD 4.3 spec.\n                REF: Pages 64-65, section 5.3.";
"       cupsaddsmb [options] -a" = "       cupsaddsmb [options] -a";
"       cupstestdsc [options] -" = "       cupstestdsc [options] -";
"       program | cupstestppd [options] -" = "       program | cupstestppd [options] -";
"      %s  \"%s %s\" conflicts with \"%s %s\"\n                (constraint=\"%s %s %s %s\")." = "      %s  “%s %s” conflicts with “%s %s”\n                (constraint=“%s %s %s %s”).";
"      %s  %s %s does not exist." = "      %s  %s %s does not exist.";
"      %s  %s file \"%s\" has the wrong capitalization." = "      %s  %s file “%s” has the wrong capitalization.";
"      %s  Bad %s choice %s.\n                REF: Page 122, section 5.17" = "      %s  Bad %s choice %s.\n                REF: Page 122, section 5.17";
"      %s  Bad UTF-8 \"%s\" translation string for option %s, choice %s." = "      %s  Bad UTF-8 “%s” translation string for option %s, choice %s.";
"      %s  Bad UTF-8 \"%s\" translation string for option %s." = "      %s  Bad UTF-8 “%s” translation string for option %s.";
"      %s  Bad cupsFilter value \"%s\"." = "      %s  Bad cupsFilter value “%s”.";
"      %s  Bad cupsFilter2 value \"%s\"." = "      %s  Bad cupsFilter2 value “%s”.";
"      %s  Bad cupsICCProfile %s." = "      %s  Bad cupsICCProfile %s.";
"      %s  Bad cupsPreFilter value \"%s\"." = "      %s  Bad cupsPreFilter value “%s”.";
"      %s  Bad cupsUIConstraints %s: \"%s\"" = "      %s  Bad cupsUIConstraints %s: “%s”";
"      %s  Bad language \"%s\"." = "      %s  Bad language “%s”.";
"      %s  Bad permissions on %s file \"%s\"." = "      %s  Bad permissions on %s file “%s”.";
"      %s  Bad spelling of %s - should be %s." = "      %s  Bad spelling of %s - should be %s.";
"      %s  Cannot provide both APScanAppPath and APScanAppBundleID." = "      %s  Cannot provide both APScanAppPath and APScanAppBundleID.";
"      %s  Default choices conflicting." = "      %s  Default choices conflicting.";
"      %s  Empty cupsUIConstraints %s" = "      %s  Empty cupsUIConstraints %s";
"      %s  Missing \"%s\" translation string for option %s, choice %s." = "      %s  Missing “%s” translation string for option %s, choice %s.";
"      %s  Missing \"%s\" translation string for option %s." = "      %s  Missing “%s” translation string for option %s.";
"      %s  Missing %s file \"%s\"." = "      %s  Missing %s file “%s”.";
"      %s  Missing REQUIRED PageRegion option.\n                REF: Page 100, section 5.14." = "      %s  Missing REQUIRED PageRegion option.\n                REF: Page 100, section 5.14.";
"      %s  Missing REQUIRED PageSize option.\n                REF: Page 99, section 5.14." = "      %s  Missing REQUIRED PageSize option.\n                REF: Page 99, section 5.14.";
"      %s  Missing choice *%s %s in UIConstraints \"*%s %s *%s %s\"." = "      %s  Missing choice *%s %s in UIConstraints “*%s %s *%s %s”.";
"      %s  Missing choice *%s %s in cupsUIConstraints %s: \"%s\"" = "      %s  Missing choice *%s %s in cupsUIConstraints %s: “%s”";
"      %s  Missing cupsUIResolver %s" = "      %s  Missing cupsUIResolver %s";
"      %s  Missing option %s in UIConstraints \"*%s %s *%s %s\"." = "      %s  Missing option %s in UIConstraints “*%s %s *%s %s”.";
"      %s  Missing option %s in cupsUIConstraints %s: \"%s\"" = "      %s  Missing option %s in cupsUIConstraints %s: “%s”";
"      %s  No base translation \"%s\" is included in file." = "      %s  No base translation “%s” is included in file.";
"      %s  REQUIRED %s does not define choice None.\n                REF: Page 122, section 5.17" = "      %s  REQUIRED %s does not define choice None.\n                REF: Page 122, section 5.17";
"      %s  Size \"%s\" defined for %s but not for %s." = "      %s  Size “%s” defined for %s but not for %s.";
"      %s  Size \"%s\" has unexpected dimensions (%gx%g)." = "      %s  Size “%s” has unexpected dimensions (%gx%g).";
"      %s  Size \"%s\" should be \"%s\"." = "      %s  Size “%s” should be “%s”.";
"      %s  Size \"%s\" should be the Adobe standard name \"%s\"." = "      %s  Size “%s” should be the Adobe standard name “%s”.";
"      %s  cupsICCProfile %s hash value collides with %s." = "      %s  cupsICCProfile %s hash value collides with %s.";
"      %s  cupsUIResolver %s causes a loop." = "      %s  cupsUIResolver %s causes a loop.";
"      %s  cupsUIResolver %s does not list at least two different options." = "      %s  cupsUIResolver %s does not list at least two different options.";
"      **FAIL**  %s must be 1284DeviceID\n                REF: Page 72, section 5.5" = "      **FAIL**  %s must be 1284DeviceID\n                REF: Page 72, section 5.5";
"      **FAIL**  Bad Default%s %s\n                REF: Page 40, section 4.5." = "      **FAIL**  Bad Default%s %s\n                REF: Page 40, section 4.5.";
"      **FAIL**  Bad DefaultImageableArea %s\n                REF: Page 102, section 5.15." = "      **FAIL**  Bad DefaultImageableArea %s\n                REF: Page 102, section 5.15.";
"      **FAIL**  Bad DefaultPaperDimension %s\n                REF: Page 103, section 5.15." = "      **FAIL**  Bad DefaultPaperDimension %s\n                REF: Page 103, section 5.15.";
"      **FAIL**  Bad FileVersion \"%s\"\n                REF: Page 56, section 5.3." = "      **FAIL**  Bad FileVersion “%s”\n                REF: Page 56, section 5.3.";
"      **FAIL**  Bad FormatVersion \"%s\"\n                REF: Page 56, section 5.3." = "      **FAIL**  Bad FormatVersion “%s”\n                REF: Page 56, section 5.3.";
"      **FAIL**  Bad JobPatchFile attribute in file\n                REF: Page 24, section 3.4." = "      **FAIL**  Bad JobPatchFile attribute in file\n                REF: Page 24, section 3.4.";
"      **FAIL**  Bad LanguageEncoding %s - must be ISOLatin1." = "      **FAIL**  Bad LanguageEncoding %s - must be ISOLatin1.";
"      **FAIL**  Bad LanguageVersion %s - must be English." = "      **FAIL**  Bad LanguageVersion %s - must be English.";
"      **FAIL**  Bad Manufacturer (should be \"%s\")\n                REF: Page 211, table D.1." = "      **FAIL**  Bad Manufacturer (should be “%s”)\n                REF: Page 211, table D.1.";
"      **FAIL**  Bad ModelName - \"%c\" not allowed in string.\n                REF: Pages 59-60, section 5.3." = "      **FAIL**  Bad ModelName - “%c” not allowed in string.\n                REF: Pages 59-60, section 5.3.";
"      **FAIL**  Bad PSVersion - not \"(string) int\".\n                REF: Pages 62-64, section 5.3." = "      **FAIL**  Bad PSVersion - not “(string) int”.\n                REF: Pages 62-64, section 5.3.";
"      **FAIL**  Bad Product - not \"(string)\".\n                REF: Page 62, section 5.3." = "      **FAIL**  Bad Product - not “(string)”.\n                REF: Page 62, section 5.3.";
"      **FAIL**  Bad ShortNickName - longer than 31 chars.\n                REF: Pages 64-65, section 5.3." = "      **FAIL**  Bad ShortNickName - longer than 31 chars.\n                REF: Pages 64-65, section 5.3.";
"      **FAIL**  Bad option %s choice %s\n                REF: Page 84, section 5.9" = "      **FAIL**  Bad option %s choice %s\n                REF: Page 84, section 5.9";
"      **FAIL**  Default option code cannot be interpreted: %s" = "      **FAIL**  Default option code cannot be interpreted: %s";
"      **FAIL**  Default translation string for option %s choice %s contains 8-bit characters." = "      **FAIL**  Default translation string for option %s choice %s contains 8-bit characters.";
"      **FAIL**  Default translation string for option %s contains 8-bit characters." = "      **FAIL**  Default translation string for option %s contains 8-bit characters.";
"      **FAIL**  Group names %s and %s differ only by case." = "      **FAIL**  Group names %s and %s differ only by case.";
"      **FAIL**  Multiple occurrences of option %s choice name %s." = "      **FAIL**  Multiple occurrences of option %s choice name %s.";
"      **FAIL**  Option %s choice names %s and %s differ only by case." = "      **FAIL**  Option %s choice names %s and %s differ only by case.";
"      **FAIL**  Option names %s and %s differ only by case." = "      **FAIL**  Option names %s and %s differ only by case.";
"      **FAIL**  REQUIRED Default%s\n                REF: Page 40, section 4.5." = "      **FAIL**  REQUIRED Default%s\n                REF: Page 40, section 4.5.";
"      **FAIL**  REQUIRED DefaultImageableArea\n                REF: Page 102, section 5.15." = "      **FAIL**  REQUIRED DefaultImageableArea\n                REF: Page 102, section 5.15.";
"      **FAIL**  REQUIRED DefaultPaperDimension\n                REF: Page 103, section 5.15." = "      **FAIL**  REQUIRED DefaultPaperDimension\n                REF: Page 103, section 5.15.";
"      **FAIL**  REQUIRED FileVersion\n                REF: Page 56, section 5.3." = "      **FAIL**  REQUIRED FileVersion\n                REF: Page 56, section 5.3.";
"      **FAIL**  REQUIRED FormatVersion\n                REF: Page 56, section 5.3." = "      **FAIL**  REQUIRED FormatVersion\n                REF: Page 56, section 5.3.";
"      **FAIL**  REQUIRED ImageableArea for PageSize %s\n                REF: Page 41, section 5.\n                REF: Page 102, section 5.15." = "      **FAIL**  REQUIRED ImageableArea for PageSize %s\n                REF: Page 41, section 5.\n                REF: Page 102, section 5.15.";
"      **FAIL**  REQUIRED LanguageEncoding\n                REF: Pages 56-57, section 5.3." = "      **FAIL**  REQUIRED LanguageEncoding\n                REF: Pages 56-57, section 5.3.";
"      **FAIL**  REQUIRED LanguageVersion\n                REF: Pages 57-58, section 5.3." = "      **FAIL**  REQUIRED LanguageVersion\n                REF: Pages 57-58, section 5.3.";
"      **FAIL**  REQUIRED Manufacturer\n                REF: Pages 58-59, section 5.3." = "      **FAIL**  REQUIRED Manufacturer\n                REF: Pages 58-59, section 5.3.";
"      **FAIL**  REQUIRED ModelName\n                REF: Pages 59-60, section 5.3." = "      **FAIL**  REQUIRED ModelName\n                REF: Pages 59-60, section 5.3.";
"      **FAIL**  REQUIRED NickName\n                REF: Page 60, section 5.3." = "      **FAIL**  REQUIRED NickName\n                REF: Page 60, section 5.3.";
"      **FAIL**  REQUIRED PCFileName\n                REF: Pages 61-62, section 5.3." = "      **FAIL**  REQUIRED PCFileName\n                REF: Pages 61-62, section 5.3.";
"      **FAIL**  REQUIRED PSVersion\n                REF: Pages 62-64, section 5.3." = "      **FAIL**  REQUIRED PSVersion\n                REF: Pages 62-64, section 5.3.";
"      **FAIL**  REQUIRED PageRegion\n                REF: Page 100, section 5.14." = "      **FAIL**  REQUIRED PageRegion\n                REF: Page 100, section 5.14.";
"      **FAIL**  REQUIRED PageSize\n                REF: Page 41, section 5.\n                REF: Page 99, section 5.14." = "      **FAIL**  REQUIRED PageSize\n                REF: Page 41, section 5.\n                REF: Page 99, section 5.14.";
"      **FAIL**  REQUIRED PageSize\n                REF: Pages 99-100, section 5.14." = "      **FAIL**  REQUIRED PageSize\n                REF: Pages 99-100, section 5.14.";
"      **FAIL**  REQUIRED PaperDimension for PageSize %s\n                REF: Page 41, section 5.\n                REF: Page 103, section 5.15." = "      **FAIL**  REQUIRED PaperDimension for PageSize %s\n                REF: Page 41, section 5.\n                REF: Page 103, section 5.15.";
"      **FAIL**  REQUIRED Product\n                REF: Page 62, section 5.3." = "      **FAIL**  REQUIRED Product\n                REF: Page 62, section 5.3.";
"      **FAIL**  REQUIRED ShortNickName\n                REF: Page 64-65, section 5.3." = "      **FAIL**  REQUIRED ShortNickName\n                REF: Page 64-65, section 5.3.";
"      **FAIL**  Unable to open PPD file - %s on line %d." = "      **FAIL**  Unable to open PPD file - %s on line %d.";
"    %d ERRORS FOUND" = "    %d ERRORS FOUND";
"    -h       Show program usage" = "    -h       Show program usage";
"    Bad %%%%BoundingBox: on line %d.\n        REF: Page 39, %%%%BoundingBox:" = "    Bad %%%%BoundingBox: on line %d.\n        REF: Page 39, %%%%BoundingBox:";
"    Bad %%%%Page: on line %d.\n        REF: Page 53, %%%%Page:" = "    Bad %%%%Page: on line %d.\n        REF: Page 53, %%%%Page:";
"    Bad %%%%Pages: on line %d.\n        REF: Page 43, %%%%Pages:" = "    Bad %%%%Pages: on line %d.\n        REF: Page 43, %%%%Pages:";
"    Line %d is longer than 255 characters (%d).\n        REF: Page 25, Line Length" = "    Line %d is longer than 255 characters (%d).\n        REF: Page 25, Line Length";
"    Missing %!PS-Adobe-3.0 on first line.\n        REF: Page 17, 3.1 Conforming Documents" = "    Missing %!PS-Adobe-3.0 on first line.\n        REF: Page 17, 3.1 Conforming Documents";
"    Missing %%EndComments comment.        REF: Page 41, %%EndComments" = "    Missing %%EndComments comment.        REF: Page 41, %%EndComments";
"    Missing or bad %%BoundingBox: comment.\n        REF: Page 39, %%BoundingBox:" = "    Missing or bad %%BoundingBox: comment.\n        REF: Page 39, %%BoundingBox:";
"    Missing or bad %%Page: comments.\n        REF: Page 53, %%Page:" = "    Missing or bad %%Page: comments.\n        REF: Page 53, %%Page:";
"    Missing or bad %%Pages: comment.\n        REF: Page 43, %%Pages:" = "    Missing or bad %%Pages: comment.\n        REF: Page 43, %%Pages:";
"    NO ERRORS FOUND" = "    NO ERRORS FOUND";
"    Saw %d lines that exceeded 255 characters." = "    Saw %d lines that exceeded 255 characters.";
"    Too many %%BeginDocument comments." = "    Too many %%BeginDocument comments.";
"    Too many %%EndDocument comments." = "    Too many %%EndDocument comments.";
"    Warning: file contains binary data." = "    Warning: file contains binary data.";
"    Warning: no %%EndComments comment in file." = "    Warning: no %%EndComments comment in file.";
"    Warning: obsolete DSC version %.1f in file." = "    Warning: obsolete DSC version %.1f in file.";
"  ! expression            Unary NOT of expression." = "  ! expression            Unary NOT of expression.";
"  ( expressions )         Group expressions." = "  ( expressions )         Group expressions.";
"  --[no-]debug-logging    Turn debug logging on/off." = "  --[no-]debug-logging    Turn debug logging on/off.";
"  --[no-]remote-admin     Turn remote administration on/off." = "  --[no-]remote-admin     Turn remote administration on/off.";
"  --[no-]remote-any       Allow/prevent access from the Internet." = "  --[no-]remote-any       Allow/prevent access from the Internet.";
"  --[no-]share-printers   Turn printer sharing on/off." = "  --[no-]share-printers   Turn printer sharing on/off.";
"  --[no-]user-cancel-any  Allow/prevent users to cancel any job." = "  --[no-]user-cancel-any  Allow/prevent users to cancel any job.";
"  --cr                    End lines with CR (Mac OS 9)." = "  --cr                    End lines with CR (Mac OS 9).";
"  --crlf                  End lines with CR + LF (Windows)." = "  --crlf                  End lines with CR + LF (Windows).";
"  --domain regex          Match domain to regular expression." = "  --domain regex          Match domain to regular expression.";
"  --exec utility [argument ...] ;\n                          Execute program if true." = "  --exec utility [argument …] ;\n                          Execute program if true.";
"  --false                 Always false." = "  --false                 Always false.";
"  --help                  Show help." = "  --help                  Show help.";
"  --help                  Show this help." = "  --help                  Show this help.";
"  --host regex            Match hostname to regular expression." = "  --host regex            Match hostname to regular expression.";
"  --lf                    End lines with LF (UNIX/Linux/macOS)." = "  --lf                    End lines with LF (UNIX/Linux/macOS).";
"  --list-filters          List filters that will be used." = "  --list-filters          List filters that will be used.";
"  --local                 True if service is local." = "  --local                 True if service is local.";
"  --ls                    List attributes." = "  --ls                    List attributes.";
"  --name regex            Match service name to regular expression." = "  --name regex            Match service name to regular expression.";
"  --not expression        Unary NOT of expression." = "  --not expression        Unary NOT of expression.";
"  --path regex            Match resource path to regular expression." = "  --path regex            Match resource path to regular expression.";
"  --port number[-number]  Match port to number or range." = "  --port number[-number]  Match port to number or range.";
"  --print                 Print URI if true." = "  --print                 Print URI if true.";
"  --print-name            Print service name if true." = "  --print-name            Print service name if true.";
"  --quiet                 Quietly report match via exit code." = "  --quiet                 Quietly report match via exit code.";
"  --remote                True if service is remote." = "  --remote                True if service is remote.";
"  --stop-after-include-error\n                          Stop tests after a failed INCLUDE." = "  --stop-after-include-error\n                          Stop tests after a failed INCLUDE.";
"  --true                  Always true." = "  --true                  Always true.";
"  --txt key               True if the TXT record contains the key." = "  --txt key               True if the TXT record contains the key.";
"  --txt-* regex           Match TXT record key to regular expression." = "  --txt-* regex           Match TXT record key to regular expression.";
"  --uri regex             Match URI to regular expression." = "  --uri regex             Match URI to regular expression.";
"  --version               Show program version." = "  --version               Show program version.";
"  --version               Show version." = "  --version               Show version.";
"  -4                      Connect using IPv4." = "  -4                      Connect using IPv4.";
"  -6                      Connect using IPv6." = "  -6                      Connect using IPv6.";
"  -C                      Send requests using chunking (default)." = "  -C                      Send requests using chunking (default).";
"  -D                      Remove the input file when finished." = "  -D                      Remove the input file when finished.";
"  -D name=value           Set named variable to value." = "  -D name=value           Set named variable to value.";
"  -E                      Encrypt the connection." = "  -E                      Encrypt the connection.";
"  -E                      Test with encryption using HTTP Upgrade to TLS." = "  -E                      Test with encryption using HTTP Upgrade to TLS.";
"  -F                      Run in the foreground but detach from console." = "  -F                      Run in the foreground but detach from console.";
"  -H samba-server         Use the named SAMBA server." = "  -H samba-server         Use the named SAMBA server.";
"  -I                      Ignore errors." = "  -I                      Ignore errors.";
"  -I include-dir          Add include directory to search path." = "  -I include-dir          Add include directory to search path.";
"  -I {filename,filters,none,profiles}" = "  -I {filename,filters,none,profiles}";
"  -L                      Send requests using content-length." = "  -L                      Send requests using content-length.";
"  -P filename.plist       Produce XML plist to a file and test report to standard output." = "  -P filename.plist       Produce XML plist to a file and test report to standard output.";
"  -P filename.ppd         Set PPD file." = "  -P filename.ppd         Set PPD file.";
"  -P number[-number]      Match port to number or range." = "  -P number[-number]      Match port to number or range.";
"  -R root-directory       Set alternate root." = "  -R root-directory       Set alternate root.";
"  -S                      Test with encryption using HTTPS." = "  -S                      Test with encryption using HTTPS.";
"  -T seconds              Set the browse timeout in seconds." = "  -T seconds              Set the browse timeout in seconds.";
"  -T seconds              Set the receive/send timeout in seconds." = "  -T seconds              Set the receive/send timeout in seconds.";
"  -U username             Specify username." = "  -U username             Specify username.";
"  -V version              Set default IPP version." = "  -V version              Set default IPP version.";
"  -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}" = "  -W {all,none,constraints,defaults,duplex,filters,profiles,sizes,translations}";
"  -X                      Produce XML plist instead of plain text." = "  -X                      Produce XML plist instead of plain text.";
"  -a                      Export all printers." = "  -a                      Export all printers.";
"  -c                      Produce CSV output." = "  -c                      Produce CSV output.";
"  -c catalog.po           Load the specified message catalog." = "  -c catalog.po           Load the specified message catalog.";
"  -c cups-files.conf      Set cups-files.conf file to use." = "  -c cups-files.conf      Set cups-files.conf file to use.";
"  -c cupsd.conf           Set cupsd.conf file to use." = "  -c cupsd.conf           Set cupsd.conf file to use.";
"  -d name=value           Set named variable to value." = "  -d name=value           Set named variable to value.";
"  -d output-dir           Specify the output directory." = "  -d output-dir           Specify the output directory.";
"  -d printer              Use the named printer." = "  -d printer              Use the named printer.";
"  -d regex                Match domain to regular expression." = "  -d regex                Match domain to regular expression.";
"  -e                      Use every filter from the PPD file." = "  -e                      Use every filter from the PPD file.";
"  -f                      Run in the foreground." = "  -f                      Run in the foreground.";
"  -f filename             Set default request filename." = "  -f filename             Set default request filename.";
"  -h                      Show this usage message." = "  -h                      Show this usage message.";
"  -h                      Validate HTTP response headers." = "  -h                      Validate HTTP response headers.";
"  -h regex                Match hostname to regular expression." = "  -h regex                Match hostname to regular expression.";
"  -h server[:port]        Specify server address." = "  -h server[:port]        Specify server address.";
"  -i mime/type            Set input MIME type (otherwise auto-typed)." = "  -i mime/type            Set input MIME type (otherwise auto-typed).";
"  -i seconds              Repeat the last file with the given time interval." = "  -i seconds              Repeat the last file with the given time interval.";
"  -j job-id[,N]           Filter file N from the specified job (default is file 1)." = "  -j job-id[,N]           Filter file N from the specified job (default is file 1).";
"  -l                      List attributes." = "  -l                      List attributes.";
"  -l                      Produce plain text output." = "  -l                      Produce plain text output.";
"  -l                      Run cupsd on demand." = "  -l                      Run cupsd on demand.";
"  -l lang[,lang,...]      Specify the output language(s) (locale)." = "  -l lang[,lang,…]      Specify the output language(s) (locale).";
"  -m                      Use the ModelName value as the filename." = "  -m                      Use the ModelName value as the filename.";
"  -m mime/type            Set output MIME type (otherwise application/pdf)." = "  -m mime/type            Set output MIME type (otherwise application/pdf).";
"  -n copies               Set number of copies." = "  -n copies               Set number of copies.";
"  -n count                Repeat the last file the given number of times." = "  -n count                Repeat the last file the given number of times.";
"  -n regex                Match service name to regular expression." = "  -n regex                Match service name to regular expression.";
"  -o filename.drv         Set driver information file (otherwise ppdi.drv)." = "  -o filename.drv         Set driver information file (otherwise ppdi.drv).";
"  -o filename.ppd[.gz]    Set output file (otherwise stdout)." = "  -o filename.ppd[.gz]    Set output file (otherwise stdout).";
"  -o name=value           Set option(s)." = "  -o name=value           Set option(s).";
"  -p                      Print URI if true." = "  -p                      Print URI if true.";
"  -p filename.ppd         Set PPD file." = "  -p filename.ppd         Set PPD file.";
"  -q                      Quietly report match via exit code." = "  -q                      Quietly report match via exit code.";
"  -q                      Run silently." = "  -q                      Run silently.";
"  -r                      True if service is remote." = "  -r                      True if service is remote.";
"  -r                      Use 'relaxed' open mode." = "  -r                      Use ‘relaxed’ open mode.";
"  -s                      Print service name if true." = "  -s                      Print service name if true.";
"  -s cups-files.conf      Set cups-files.conf file to use." = "  -s cups-files.conf      Set cups-files.conf file to use.";
"  -t                      Produce a test report." = "  -t                      Produce a test report.";
"  -t                      Test PPDs instead of generating them." = "  -t                      Test PPDs instead of generating them.";
"  -t                      Test the configuration file." = "  -t                      Test the configuration file.";
"  -t key                  True if the TXT record contains the key." = "  -t key                  True if the TXT record contains the key.";
"  -t title                Set title." = "  -t title                Set title.";
"  -u                      Remove the PPD file when finished." = "  -u                      Remove the PPD file when finished.";
"  -u regex                Match URI to regular expression." = "  -u regex                Match URI to regular expression.";
"  -v                      Be verbose." = "  -v                      Be verbose.";
"  -vv                     Be very verbose." = "  -vv                     Be very verbose.";
"  -x utility [argument ...] ;\n                          Execute program if true." = "  -x utility [argument …] ;\n                          Execute program if true.";
"  -z                      Compress PPD files using GNU zip." = "  -z                      Compress PPD files using GNU zip.";
"  IPPFIND_SERVICE_DOMAIN  Domain name" = "  IPPFIND_SERVICE_DOMAIN  Domain name";
"  IPPFIND_SERVICE_HOSTNAME\n                          Fully-qualified domain name" = "  IPPFIND_SERVICE_HOSTNAME\n                          Fully-qualified domain name";
"  IPPFIND_SERVICE_NAME    Service instance name" = "  IPPFIND_SERVICE_NAME    Service instance name";
"  IPPFIND_SERVICE_PORT    Port number" = "  IPPFIND_SERVICE_PORT    Port number";
"  IPPFIND_SERVICE_REGTYPE DNS-SD registration type" = "  IPPFIND_SERVICE_REGTYPE DNS-SD registration type";
"  IPPFIND_SERVICE_SCHEME  URI scheme" = "  IPPFIND_SERVICE_SCHEME  URI scheme";
"  IPPFIND_SERVICE_URI     URI" = "  IPPFIND_SERVICE_URI     URI";
"  IPPFIND_TXT_*           Value of TXT record key" = "  IPPFIND_TXT_*           Value of TXT record key";
"  expression --and expression\n                          Logical AND." = "  expression --and expression\n                          Logical AND.";
"  expression --or expression\n                          Logical OR." = "  expression --or expression\n                          Logical OR.";
"  expression expression   Logical AND." = "  expression expression   Logical AND.";
"  {service_domain}        Domain name" = "  {service_domain}        Domain name";
"  {service_hostname}      Fully-qualified domain name" = "  {service_hostname}      Fully-qualified domain name";
"  {service_name}          Service instance name" = "  {service_name}          Service instance name";
"  {service_port}          Port number" = "  {service_port}          Port number";
"  {service_regtype}       DNS-SD registration type" = "  {service_regtype}       DNS-SD registration type";
"  {service_scheme}        URI scheme" = "  {service_scheme}        URI scheme";
"  {service_uri}           URI" = "  {service_uri}           URI";
"  {txt_*}                 Value of TXT record key" = "  {txt_*}                 Value of TXT record key";
"  {}                      URI" = "  {}                      URI";
" FAIL" = " FAIL";
" PASS" = " PASS";
"\"%s\": Bad URI value \"%s\" - %s (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - %s (RFC 8011 section 5.1.6).";
"\"%s\": Bad URI value \"%s\" - bad length %d (RFC 8011 section 5.1.6)." = "“%s”: Bad URI value “%s” - bad length %d (RFC 8011 section 5.1.6).";
"\"%s\": Bad attribute name - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - bad length %d (RFC 8011 section 5.1.4).";
"\"%s\": Bad attribute name - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad attribute name - invalid character (RFC 8011 section 5.1.4).";
"\"%s\": Bad boolen value %d (RFC 8011 section 5.1.21)." = "“%s”: Bad boolen value %d (RFC 8011 section 5.1.21).";
"\"%s\": Bad charset value \"%s\" - bad characters (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad characters (RFC 8011 section 5.1.8).";
"\"%s\": Bad charset value \"%s\" - bad length %d (RFC 8011 section 5.1.8)." = "“%s”: Bad charset value “%s” - bad length %d (RFC 8011 section 5.1.8).";
"\"%s\": Bad dateTime UTC hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC hours %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC minutes %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime UTC sign '%c' (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime UTC sign ‘%c’ (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime day %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime day %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime deciseconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime deciseconds %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime hours %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime hours %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime minutes %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime minutes %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime month %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime month %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad dateTime seconds %u (RFC 8011 section 5.1.15)." = "“%s”: Bad dateTime seconds %u (RFC 8011 section 5.1.15).";
"\"%s\": Bad enum value %d - out of range (RFC 8011 section 5.1.5)." = "“%s”: Bad enum value %d - out of range (RFC 8011 section 5.1.5).";
"\"%s\": Bad keyword value \"%s\" - bad length %d (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - bad length %d (RFC 8011 section 5.1.4).";
"\"%s\": Bad keyword value \"%s\" - invalid character (RFC 8011 section 5.1.4)." = "“%s”: Bad keyword value “%s” - invalid character (RFC 8011 section 5.1.4).";
"\"%s\": Bad mimeMediaType value \"%s\" - bad characters (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad characters (RFC 8011 section 5.1.10).";
"\"%s\": Bad mimeMediaType value \"%s\" - bad length %d (RFC 8011 section 5.1.10)." = "“%s”: Bad mimeMediaType value “%s” - bad length %d (RFC 8011 section 5.1.10).";
"\"%s\": Bad name value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.3).";
"\"%s\": Bad name value \"%s\" - bad length %d (RFC 8011 section 5.1.3)." = "“%s”: Bad name value “%s” - bad length %d (RFC 8011 section 5.1.3).";
"\"%s\": Bad naturalLanguage value \"%s\" - bad characters (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad characters (RFC 8011 section 5.1.9).";
"\"%s\": Bad naturalLanguage value \"%s\" - bad length %d (RFC 8011 section 5.1.9)." = "“%s”: Bad naturalLanguage value “%s” - bad length %d (RFC 8011 section 5.1.9).";
"\"%s\": Bad octetString value - bad length %d (RFC 8011 section 5.1.20)." = "“%s”: Bad octetString value - bad length %d (RFC 8011 section 5.1.20).";
"\"%s\": Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14)." = "“%s”: Bad rangeOfInteger value %d-%d - lower greater than upper (RFC 8011 section 5.1.14).";
"\"%s\": Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - bad units value (RFC 8011 section 5.1.16).";
"\"%s\": Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - cross feed resolution must be positive (RFC 8011 section 5.1.16).";
"\"%s\": Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16)." = "“%s”: Bad resolution value %dx%d%s - feed resolution must be positive (RFC 8011 section 5.1.16).";
"\"%s\": Bad text value \"%s\" - bad UTF-8 sequence (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad UTF-8 sequence (RFC 8011 section 5.1.2).";
"\"%s\": Bad text value \"%s\" - bad length %d (RFC 8011 section 5.1.2)." = "“%s”: Bad text value “%s” - bad length %d (RFC 8011 section 5.1.2).";
"\"%s\": Bad uriScheme value \"%s\" - bad characters (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad characters (RFC 8011 section 5.1.7).";
"\"%s\": Bad uriScheme value \"%s\" - bad length %d (RFC 8011 section 5.1.7)." = "“%s”: Bad uriScheme value “%s” - bad length %d (RFC 8011 section 5.1.7).";
"%-7s %-7.7s %-7d %-31.31s %.0f bytes" = "%-7s %-7.7s %-7d %-31.31s %.0f bytes";
"%d x %d mm" = "%d x %d mm";
"%g x %g \"" = "%g x %g ″";
"%s (%s)" = "%s (%s)";
"%s (%s, %s)" = "%s (%s, %s)";
"%s (Borderless)" = "%s (Borderless)";
"%s (Borderless, %s)" = "%s (Borderless, %s)";
"%s (Borderless, %s, %s)" = "%s (Borderless, %s, %s)";
"%s accepting requests since %s" = "%s accepting requests since %s";
"%s cannot be changed." = "%s cannot be changed.";
"%s is not implemented by the CUPS version of lpc." = "%s is not implemented by the CUPS version of lpc.";
"%s is not ready" = "%s is not ready";
"%s is ready" = "%s is ready";
"%s is ready and printing" = "%s is ready and printing";
"%s job-id user title copies options [file]" = "%s job-id user title copies options [file]";
"%s not accepting requests since %s -" = "%s not accepting requests since %s -";
"%s not supported." = "%s not supported.";
"%s/%s accepting requests since %s" = "%s/%s accepting requests since %s";
"%s/%s not accepting requests since %s -" = "%s/%s not accepting requests since %s -";
"%s: %-33.33s [job %d localhost]" = "%s: %-33.33s [job %d localhost]";
// TRANSLATORS: Message is "subject: error"
"%s: %s" = "%s: %s";
"%s: %s failed: %s" = "%s: %s failed: %s";
"%s: Bad printer URI \"%s\"." = "%s: Bad printer URI “%s”.";
"%s: Bad version %s for \"-V\"." = "%s: Bad version %s for “-V”.";
"%s: Don't know what to do." = "%s: Don’t know what to do.";
"%s: Error - %s environment variable names non-existent destination \"%s\"." = "%s: Error - %s environment variable names non-existent destination “%s”.";
"%s: Error - add '/version=1.1' to server name." = "%s: Error - add ‘/version=1.1’ to server name.";
"%s: Error - bad job ID." = "%s: Error - bad job ID.";
"%s: Error - cannot print files and alter jobs simultaneously." = "%s: Error - cannot print files and alter jobs simultaneously.";
"%s: Error - cannot print from stdin if files or a job ID are provided." = "%s: Error - cannot print from stdin if files or a job ID are provided.";
"%s: Error - copies must be 1 or more." = "%s: Error - copies must be 1 or more.";
"%s: Error - expected character set after \"-S\" option." = "%s: Error - expected character set after “-S” option.";
"%s: Error - expected content type after \"-T\" option." = "%s: Error - expected content type after “-T” option.";
"%s: Error - expected copies after \"-#\" option." = "%s: Error - expected copies after “-#” option.";
"%s: Error - expected copies after \"-n\" option." = "%s: Error - expected copies after “-n” option.";
"%s: Error - expected destination after \"-P\" option." = "%s: Error - expected destination after “-P” option.";
"%s: Error - expected destination after \"-d\" option." = "%s: Error - expected destination after “-d” option.";
"%s: Error - expected form after \"-f\" option." = "%s: Error - expected form after “-f” option.";
"%s: Error - expected hold name after \"-H\" option." = "%s: Error - expected hold name after “-H” option.";
"%s: Error - expected hostname after \"-H\" option." = "%s: Error - expected hostname after “-H” option.";
"%s: Error - expected hostname after \"-h\" option." = "%s: Error - expected hostname after “-h” option.";
"%s: Error - expected mode list after \"-y\" option." = "%s: Error - expected mode list after “-y” option.";
"%s: Error - expected name after \"-%c\" option." = "%s: Error - expected name after “-%c” option.";
"%s: Error - expected option=value after \"-o\" option." = "%s: Error - expected option=value after “-o” option.";
"%s: Error - expected page list after \"-P\" option." = "%s: Error - expected page list after “-P” option.";
"%s: Error - expected priority after \"-%c\" option." = "%s: Error - expected priority after “-%c” option.";
"%s: Error - expected reason text after \"-r\" option." = "%s: Error - expected reason text after “-r” option.";
"%s: Error - expected title after \"-t\" option." = "%s: Error - expected title after “-t” option.";
"%s: Error - expected username after \"-U\" option." = "%s: Error - expected username after “-U” option.";
"%s: Error - expected username after \"-u\" option." = "%s: Error - expected username after “-u” option.";
"%s: Error - expected value after \"-%c\" option." = "%s: Error - expected value after “-%c” option.";
"%s: Error - need \"completed\", \"not-completed\", or \"all\" after \"-W\" option." = "%s: Error - need “completed”, “not-completed”, or “all” after “-W” option.";
"%s: Error - no default destination available." = "%s: Error - no default destination available.";
"%s: Error - priority must be between 1 and 100." = "%s: Error - priority must be between 1 and 100.";
"%s: Error - scheduler not responding." = "%s: Error - scheduler not responding.";
"%s: Error - too many files - \"%s\"." = "%s: Error - too many files - “%s”.";
"%s: Error - unable to access \"%s\" - %s" = "%s: Error - unable to access “%s” - %s";
"%s: Error - unable to queue from stdin - %s." = "%s: Error - unable to queue from stdin - %s.";
"%s: Error - unknown destination \"%s\"." = "%s: Error - unknown destination “%s”.";
"%s: Error - unknown destination \"%s/%s\"." = "%s: Error - unknown destination “%s/%s”.";
"%s: Error - unknown option \"%c\"." = "%s: Error - unknown option “%c”.";
"%s: Error - unknown option \"%s\"." = "%s: Error - unknown option “%s”.";
"%s: Expected job ID after \"-i\" option." = "%s: Expected job ID after “-i” option.";
"%s: Invalid destination name in list \"%s\"." = "%s: Invalid destination name in list “%s”.";
"%s: Invalid filter string \"%s\"." = "%s: Invalid filter string “%s”.";
"%s: Missing filename for \"-P\"." = "%s: Missing filename for “-P”.";
"%s: Missing timeout for \"-T\"." = "%s: Missing timeout for “-T”.";
"%s: Missing version for \"-V\"." = "%s: Missing version for “-V”.";
"%s: Need job ID (\"-i jobid\") before \"-H restart\"." = "%s: Need job ID (“-i jobid”) before “-H restart”.";
"%s: No filter to convert from %s/%s to %s/%s." = "%s: No filter to convert from %s/%s to %s/%s.";
"%s: Operation failed: %s" = "%s: Operation failed: %s";
"%s: Sorry, no encryption support." = "%s: Sorry, no encryption support.";
"%s: Unable to connect to \"%s:%d\": %s" = "%s: Unable to connect to “%s:%d”: %s";
"%s: Unable to connect to server." = "%s: Unable to connect to server.";
"%s: Unable to contact server." = "%s: Unable to contact server.";
"%s: Unable to create PPD file: %s" = "%s: Unable to create PPD file: %s";
"%s: Unable to determine MIME type of \"%s\"." = "%s: Unable to determine MIME type of “%s”.";
"%s: Unable to open \"%s\": %s" = "%s: Unable to open “%s”: %s";
"%s: Unable to open %s: %s" = "%s: Unable to open %s: %s";
"%s: Unable to open PPD file: %s on line %d." = "%s: Unable to open PPD file: %s on line %d.";
"%s: Unable to read MIME database from \"%s\" or \"%s\"." = "%s: Unable to read MIME database from “%s” or “%s”.";
"%s: Unable to resolve \"%s\"." = "%s: Unable to resolve “%s”.";
"%s: Unknown argument \"%s\"." = "%s: Unknown argument “%s”.";
"%s: Unknown destination \"%s\"." = "%s: Unknown destination “%s”.";
"%s: Unknown destination MIME type %s/%s." = "%s: Unknown destination MIME type %s/%s.";
"%s: Unknown option \"%c\"." = "%s: Unknown option “%c”.";
"%s: Unknown option \"%s\"." = "%s: Unknown option “%s”.";
"%s: Unknown option \"-%c\"." = "%s: Unknown option “-%c”.";
"%s: Unknown source MIME type %s/%s." = "%s: Unknown source MIME type %s/%s.";
"%s: Warning - \"%c\" format modifier not supported - output may not be correct." = "%s: Warning - “%c” format modifier not supported - output may not be correct.";
"%s: Warning - character set option ignored." = "%s: Warning - character set option ignored.";
"%s: Warning - content type option ignored." = "%s: Warning - content type option ignored.";
"%s: Warning - form option ignored." = "%s: Warning - form option ignored.";
"%s: Warning - mode option ignored." = "%s: Warning - mode option ignored.";
"-1" = "-1";
"-10" = "-10";
"-100" = "-100";
"-105" = "-105";
"-11" = "-11";
"-110" = "-110";
"-115" = "-115";
"-12" = "-12";
"-120" = "-120";
"-13" = "-13";
"-14" = "-14";
"-15" = "-15";
"-2" = "-2";
"-20" = "-20";
"-25" = "-25";
"-3" = "-3";
"-30" = "-30";
"-35" = "-35";
"-4" = "-4";
"-40" = "-40";
"-45" = "-45";
"-5" = "-5";
"-50" = "-50";
"-55" = "-55";
"-6" = "-6";
"-60" = "-60";
"-65" = "-65";
"-7" = "-7";
"-70" = "-70";
"-75" = "-75";
"-8" = "-8";
"-80" = "-80";
"-85" = "-85";
"-9" = "-9";
"-90" = "-90";
"-95" = "-95";
"0" = "0";
"1" = "1";
"1 inch/sec." = "1 inch/sec.";
"1.25x0.25\"" = "1.25x0.25″";
"1.25x2.25\"" = "1.25x2.25″";
"1.5 inch/sec." = "1.5 inch/sec.";
"1.50x0.25\"" = "1.50x0.25″";
"1.50x0.50\"" = "1.50x0.50″";
"1.50x1.00\"" = "1.50x1.00″";
"1.50x2.00\"" = "1.50x2.00″";
"10" = "10";
"10 inches/sec." = "10 inches/sec.";
"10 x 11" = "10 x 11";
"10 x 13" = "10 x 13";
"10 x 14" = "10 x 14";
"100" = "100";
"100 mm/sec." = "100 mm/sec.";
"105" = "105";
"11" = "11";
"11 inches/sec." = "11 inches/sec.";
"110" = "110";
"115" = "115";
"12" = "12";
"12 inches/sec." = "12 inches/sec.";
"12 x 11" = "12 x 11";
"120" = "120";
"120 mm/sec." = "120 mm/sec.";
"120x60dpi" = "120x60dpi";
"120x72dpi" = "120x72dpi";
"13" = "13";
"136dpi" = "136dpi";
"14" = "14";
"15" = "15";
"15 mm/sec." = "15 mm/sec.";
"15 x 11" = "15 x 11";
"150 mm/sec." = "150 mm/sec.";
"150dpi" = "150dpi";
"16" = "16";
"17" = "17";
"18" = "18";
"180dpi" = "180dpi";
"19" = "19";
"2" = "2";
"2 inches/sec." = "2 inches/sec.";
"2-Hole Punch (Landscape)" = "2-Hole Punch (Landscape)";
"2-Hole Punch (Portrait)" = "2-Hole Punch (Portrait)";
"2-Hole Punch (Reverse Landscape)" = "2-Hole Punch (Reverse Landscape)";
"2-Hole Punch (Reverse Portrait)" = "2-Hole Punch (Reverse Portrait)";
"2-Sided Printing" = "2-Sided Printing";
"2.00x0.37\"" = "2.00x0.37″";
"2.00x0.50\"" = "2.00x0.50″";
"2.00x1.00\"" = "2.00x1.00″";
"2.00x1.25\"" = "2.00x1.25″";
"2.00x2.00\"" = "2.00x2.00″";
"2.00x3.00\"" = "2.00x3.00″";
"2.00x4.00\"" = "2.00x4.00″";
"2.00x5.50\"" = "2.00x5.50″";
"2.25x0.50\"" = "2.25x0.50″";
"2.25x1.25\"" = "2.25x1.25″";
"2.25x4.00\"" = "2.25x4.00″";
"2.25x5.50\"" = "2.25x5.50″";
"2.38x5.50\"" = "2.38x5.50″";
"2.5 inches/sec." = "2.5 inches/sec.";
"2.50x1.00\"" = "2.50x1.00″";
"2.50x2.00\"" = "2.50x2.00″";
"2.75x1.25\"" = "2.75x1.25″";
"2.9 x 1\"" = "2.9 x 1″";
"20" = "20";
"20 mm/sec." = "20 mm/sec.";
"200 mm/sec." = "200 mm/sec.";
"203dpi" = "203dpi";
"21" = "21";
"22" = "22";
"23" = "23";
"24" = "24";
"24-Pin Series" = "24-Pin Series";
"240x72dpi" = "240x72dpi";
"25" = "25";
"250 mm/sec." = "250 mm/sec.";
"26" = "26";
"27" = "27";
"28" = "28";
"29" = "29";
"3" = "3";
"3 inches/sec." = "3 inches/sec.";
"3 x 5" = "3 x 5";
"3-Hole Punch (Landscape)" = "3-Hole Punch (Landscape)";
"3-Hole Punch (Portrait)" = "3-Hole Punch (Portrait)";
"3-Hole Punch (Reverse Landscape)" = "3-Hole Punch (Reverse Landscape)";
"3-Hole Punch (Reverse Portrait)" = "3-Hole Punch (Reverse Portrait)";
"3.00x1.00\"" = "3.00x1.00″";
"3.00x1.25\"" = "3.00x1.25″";
"3.00x2.00\"" = "3.00x2.00″";
"3.00x3.00\"" = "3.00x3.00″";
"3.00x5.00\"" = "3.00x5.00″";
"3.25x2.00\"" = "3.25x2.00″";
"3.25x5.00\"" = "3.25x5.00″";
"3.25x5.50\"" = "3.25x5.50″";
"3.25x5.83\"" = "3.25x5.83″";
"3.25x7.83\"" = "3.25x7.83″";
"3.5 x 5" = "3.5 x 5";
"3.5\" Disk" = "3.5″ Disk";
"3.50x1.00\"" = "3.50x1.00″";
"30" = "30";
"30 mm/sec." = "30 mm/sec.";
"300 mm/sec." = "300 mm/sec.";
"300dpi" = "300dpi";
"35" = "35";
"360dpi" = "360dpi";
"360x180dpi" = "360x180dpi";
"4" = "4";
"4 inches/sec." = "4 inches/sec.";
"4-Hole Punch (Landscape)" = "4-Hole Punch (Landscape)";
"4-Hole Punch (Portrait)" = "4-Hole Punch (Portrait)";
"4-Hole Punch (Reverse Landscape)" = "4-Hole Punch (Reverse Landscape)";
"4-Hole Punch (Reverse Portrait)" = "4-Hole Punch (Reverse Portrait)";
"4.00x1.00\"" = "4.00x1.00″";
"4.00x13.00\"" = "4.00x13.00″";
"4.00x2.00\"" = "4.00x2.00″";
"4.00x2.50\"" = "4.00x2.50″";
"4.00x3.00\"" = "4.00x3.00″";
"4.00x4.00\"" = "4.00x4.00″";
"4.00x5.00\"" = "4.00x5.00″";
"4.00x6.00\"" = "4.00x6.00″";
"4.00x6.50\"" = "4.00x6.50″";
"40" = "40";
"40 mm/sec." = "40 mm/sec.";
"45" = "45";
"5" = "5";
"5 inches/sec." = "5 inches/sec.";
"5 x 7" = "5 x 7";
"50" = "50";
"55" = "55";
"6" = "6";
"6 inches/sec." = "6 inches/sec.";
"6.00x1.00\"" = "6.00x1.00″";
"6.00x2.00\"" = "6.00x2.00″";
"6.00x3.00\"" = "6.00x3.00″";
"6.00x4.00\"" = "6.00x4.00″";
"6.00x5.00\"" = "6.00x5.00″";
"6.00x6.00\"" = "6.00x6.00″";
"6.00x6.50\"" = "6.00x6.50″";
"60" = "60";
"60 mm/sec." = "60 mm/sec.";
"600dpi" = "600dpi";
"60dpi" = "60dpi";
"60x72dpi" = "60x72dpi";
"65" = "65";
"7" = "7";
"7 inches/sec." = "7 inches/sec.";
"7 x 9" = "7 x 9";
"70" = "70";
"75" = "75";
"8" = "8";
"8 inches/sec." = "8 inches/sec.";
"8 x 10" = "8 x 10";
"8.00x1.00\"" = "8.00x1.00″";
"8.00x2.00\"" = "8.00x2.00″";
"8.00x3.00\"" = "8.00x3.00″";
"8.00x4.00\"" = "8.00x4.00″";
"8.00x5.00\"" = "8.00x5.00″";
"8.00x6.00\"" = "8.00x6.00″";
"8.00x6.50\"" = "8.00x6.50″";
"80" = "80";
"80 mm/sec." = "80 mm/sec.";
"85" = "85";
"9" = "9";
"9 inches/sec." = "9 inches/sec.";
"9 x 11" = "9 x 11";
"9 x 12" = "9 x 12";
"9-Pin Series" = "9-Pin Series";
"90" = "90";
"95" = "95";
"?Invalid help command unknown." = "?Invalid help command unknown.";
"A Samba password is required to export printer drivers" = "A Samba password is required to export printer drivers";
"A Samba username is required to export printer drivers" = "A Samba username is required to export printer drivers";
"A class named \"%s\" already exists." = "A class named “%s” already exists.";
"A printer named \"%s\" already exists." = "A printer named “%s” already exists.";
"A0" = "A0";
"A0 Long Edge" = "A0 Long Edge";
"A1" = "A1";
"A1 Long Edge" = "A1 Long Edge";
"A10" = "A10";
"A2" = "A2";
"A2 Long Edge" = "A2 Long Edge";
"A3" = "A3";
"A3 Long Edge" = "A3 Long Edge";
"A3 Oversize" = "A3 Oversize";
"A3 Oversize Long Edge" = "A3 Oversize Long Edge";
"A4" = "A4";
"A4 Long Edge" = "A4 Long Edge";
"A4 Oversize" = "A4 Oversize";
"A4 Small" = "A4 Small";
"A5" = "A5";
"A5 Long Edge" = "A5 Long Edge";
"A5 Oversize" = "A5 Oversize";
"A6" = "A6";
"A6 Long Edge" = "A6 Long Edge";
"A7" = "A7";
"A8" = "A8";
"A9" = "A9";
"ANSI A" = "ANSI A";
"ANSI B" = "ANSI B";
"ANSI C" = "ANSI C";
"ANSI D" = "ANSI D";
"ANSI E" = "ANSI E";
"ARCH C" = "ARCH C";
"ARCH C Long Edge" = "ARCH C Long Edge";
"ARCH D" = "ARCH D";
"ARCH D Long Edge" = "ARCH D Long Edge";
"ARCH E" = "ARCH E";
"ARCH E Long Edge" = "ARCH E Long Edge";
"Accept Jobs" = "Accept Jobs";
"Accepted" = "Accepted";
"Accordian Fold" = "Accordian Fold";
"Add Class" = "Add Class";
"Add Printer" = "Add Printer";
"Add RSS Subscription" = "Add RSS Subscription";
"Address" = "Address";
"Administration" = "Administration";
"Advanced Photo Paper" = "Advanced Photo Paper";
"Alternate" = "Alternate";
"Alternate Roll" = "Alternate Roll";
"Aluminum" = "Aluminum";
"Always" = "Always";
"AppSocket/HP JetDirect" = "AppSocket/HP JetDirect";
"Applicator" = "Applicator";
"Archival Envelope" = "Archival Envelope";
"Archival Fabric" = "Archival Fabric";
"Archival Paper" = "Archival Paper";
"Archival Photo Paper" = "Archival Photo Paper";
"Attempt to set %s printer-state to bad value %d." = "Attempt to set %s printer-state to bad value %d.";
"Attribute \"%s\" is in the wrong group." = "Attribute “%s” is in the wrong group.";
"Attribute \"%s\" is the wrong value type." = "Attribute “%s” is the wrong value type.";
"Attribute groups are out of order (%x < %x)." = "Attribute groups are out of order (%x < %x).";
"Automatic" = "Automatic";
"B0" = "B0";
"B1" = "B1";
"B10" = "B10";
"B2" = "B2";
"B3" = "B3";
"B4" = "B4";
"B5" = "B5";
"B5 Oversize" = "B5 Oversize";
"B6" = "B6";
"B7" = "B7";
"B8" = "B8";
"B9" = "B9";
"Back Print Film" = "Back Print Film";
"Bad 'document-format' value \"%s\"." = "Bad ‘document-format’ value “%s”.";
"Bad NULL dests pointer" = "Bad NULL dests pointer";
"Bad OpenGroup" = "Bad OpenGroup";
"Bad OpenUI/JCLOpenUI" = "Bad OpenUI/JCLOpenUI";
"Bad OrderDependency" = "Bad OrderDependency";
"Bad PPD cache file." = "Bad PPD cache file.";
"Bad PPD file." = "Bad PPD file.";
"Bad Request" = "Bad Request";
"Bad SNMP version number" = "Bad SNMP version number";
"Bad UIConstraints" = "Bad UIConstraints";
"Bad arguments to function" = "Bad arguments to function";
"Bad copies value %d." = "Bad copies value %d.";
"Bad custom parameter" = "Bad custom parameter";
"Bad device-uri \"%s\"." = "Bad device-uri “%s”.";
"Bad device-uri scheme \"%s\"." = "Bad device-uri scheme “%s”.";
"Bad document-format \"%s\"." = "Bad document-format “%s”.";
"Bad document-format-default \"%s\"." = "Bad document-format-default “%s”.";
"Bad filename buffer" = "Bad filename buffer";
"Bad hostname/address in URI" = "Bad hostname/address in URI";
"Bad job-name value: %s" = "Bad job-name value: %s";
"Bad job-name value: Wrong type or count." = "Bad job-name value: Wrong type or count.";
"Bad job-priority value." = "Bad job-priority value.";
"Bad job-sheets value \"%s\"." = "Bad job-sheets value “%s”.";
"Bad job-sheets value type." = "Bad job-sheets value type.";
"Bad job-state value." = "Bad job-state value.";
"Bad job-uri \"%s\"." = "Bad job-uri “%s”.";
"Bad notify-pull-method \"%s\"." = "Bad notify-pull-method “%s”.";
"Bad notify-recipient-uri \"%s\"." = "Bad notify-recipient-uri “%s”.";
"Bad number-up value %d." = "Bad number-up value %d.";
"Bad option + choice on line %d." = "Bad option + choice on line %d.";
"Bad page-ranges values %d-%d." = "Bad page-ranges values %d-%d.";
"Bad port number in URI" = "Bad port number in URI";
"Bad port-monitor \"%s\"." = "Bad port-monitor “%s”.";
"Bad printer-state value %d." = "Bad printer-state value %d.";
"Bad printer-uri." = "Bad printer-uri.";
"Bad request ID %d." = "Bad request ID %d.";
"Bad request version number %d.%d." = "Bad request version number %d.%d.";
"Bad requesting-user-name value: %s" = "Bad requesting-user-name value: %s";
"Bad resource in URI" = "Bad resource in URI";
"Bad scheme in URI" = "Bad scheme in URI";
"Bad subscription ID" = "Bad subscription ID";
"Bad username in URI" = "Bad username in URI";
"Bad value string" = "Bad value string";
"Bad/empty URI" = "Bad/empty URI";
"Bale" = "Bale";
"Banners" = "Banners";
"Bind" = "Bind";
"Bind (Landscape)" = "Bind (Landscape)";
"Bind (Portrait)" = "Bind (Portrait)";
"Bind (Reverse Landscape)" = "Bind (Reverse Landscape)";
"Bind (Reverse Portrait)" = "Bind (Reverse Portrait)";
"Bond Envelope" = "Bond Envelope";
"Bond Paper" = "Bond Paper";
"Booklet" = "Booklet";
"Booklet Maker" = "Booklet Maker";
"Boolean expected for waiteof option \"%s\"." = "Boolean expected for waiteof option “%s”.";
"Bottom" = "Bottom";
"Bottom Tray" = "Bottom Tray";
"Buffer overflow detected, aborting." = "Buffer overflow detected, aborting.";
"CD" = "CD";
"CMYK" = "CMYK";
"CPCL Label Printer" = "CPCL Label Printer";
"Cancel Jobs" = "Cancel Jobs";
"Cancel RSS Subscription" = "Cancel RSS Subscription";
"Canceling print job." = "Canceling print job.";
"Cannot change printer-is-shared for remote queues." = "Cannot change printer-is-shared for remote queues.";
"Cannot share a remote Kerberized printer." = "Cannot share a remote Kerberized printer.";
"Cardboard" = "Cardboard";
"Cardstock" = "Cardstock";
"Cassette" = "Cassette";
"Center" = "Center";
"Center Tray" = "Center Tray";
"Change Settings" = "Change Settings";
"Character set \"%s\" not supported." = "Character set “%s” not supported.";
"Classes" = "Classes";
"Clean Print Heads" = "Clean Print Heads";
"Close-Job doesn't support the job-uri attribute." = "Close-Job doesn’t support the job-uri attribute.";
"Coat" = "Coat";
"Coated Envelope" = "Coated Envelope";
"Coated Paper" = "Coated Paper";
"Color" = "Color";
"Color Mode" = "Color Mode";
"Colored Labels" = "Colored Labels";
"Commands may be abbreviated.  Commands are:\n\nexit    help    quit    status  ?" = "Commands may be abbreviated.  Commands are:\n\nexit    help    quit    status  ?";
"Community name uses indefinite length" = "Community name uses indefinite length";
"Connected to printer." = "Connected to printer.";
"Connecting to printer." = "Connecting to printer.";
"Continue" = "Continue";
"Continuous" = "Continuous";
"Continuous Long" = "Continuous Long";
"Continuous Short" = "Continuous Short";
"Control file sent successfully." = "Control file sent successfully.";
"Copying print data." = "Copying print data.";
"Cotton Envelope" = "Cotton Envelope";
"Cotton Paper" = "Cotton Paper";
"Cover" = "Cover";
"Created" = "Created";
"Credentials do not validate against site CA certificate." = "Credentials do not validate against site CA certificate.";
"Credentials have expired." = "Credentials have expired.";
"Custom" = "Custom";
"CustominCutInterval" = "CustominCutInterval";
"CustominTearInterval" = "CustominTearInterval";
"Cut" = "Cut";
"Cut Media" = "Cut Media";
"Cutter" = "Cutter";
"DVD" = "DVD";
"Dark" = "Dark";
"Darkness" = "Darkness";
"Data file sent successfully." = "Data file sent successfully.";
"Deep Color" = "Deep Color";
"Delete Class" = "Delete Class";
"Delete Printer" = "Delete Printer";
"DeskJet Series" = "DeskJet Series";
"Destination \"%s\" is not accepting jobs." = "Destination “%s” is not accepting jobs.";
"Device: uri = %s\n        class = %s\n        info = %s\n        make-and-model = %s\n        device-id = %s\n        location = %s" = "Device: uri = %s\n        class = %s\n        info = %s\n        make-and-model = %s\n        device-id = %s\n        location = %s";
"Direct Thermal Media" = "Direct Thermal Media";
"Directory \"%s\" contains a relative path." = "Directory “%s” contains a relative path.";
"Directory \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "Directory “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
"Directory \"%s\" is a file." = "Directory “%s” is a file.";
"Directory \"%s\" not available: %s" = "Directory “%s” not available: %s";
"Directory \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "Directory “%s” permissions OK (0%o/uid=%d/gid=%d).";
"Disabled" = "Disabled";
"Disc" = "Disc";
"Document #%d does not exist in job #%d." = "Document #%d does not exist in job #%d.";
"Double Gate Fold" = "Double Gate Fold";
"Double Staple (Landscape)" = "Double Staple (Landscape)";
"Double Staple (Portrait)" = "Double Staple (Portrait)";
"Double Staple (Reverse Landscape)" = "Double Staple (Reverse Landscape)";
"Double Staple (Reverse Portrait)" = "Double Staple (Reverse Portrait)";
"Double Wall Cardboard" = "Double Wall Cardboard";
"Draft" = "Draft";
"Dry Film" = "Dry Film";
"Duplexer" = "Duplexer";
"Dymo" = "Dymo";
"EPL1 Label Printer" = "EPL1 Label Printer";
"EPL2 Label Printer" = "EPL2 Label Printer";
"Edit Configuration File" = "Edit Configuration File";
"Embossing Foil" = "Embossing Foil";
"Empty PPD file." = "Empty PPD file.";
"Encryption is not supported." = "Encryption is not supported.";
"End Board" = "End Board";
// TRANSLATORS: Banner/cover sheet after the print job.
"Ending Banner" = "Ending Banner";
"Engineering Z Fold" = "Engineering Z Fold";
"English" = "English";
"Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket." = "Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.";
"Envelope" = "Envelope";
"Envelope #10" = "Envelope #10";
"Envelope #11" = "Envelope #11";
"Envelope #12" = "Envelope #12";
"Envelope #14" = "Envelope #14";
"Envelope #9" = "Envelope #9";
"Envelope B4" = "Envelope B4";
"Envelope B5" = "Envelope B5";
"Envelope B6" = "Envelope B6";
"Envelope C0" = "Envelope C0";
"Envelope C1" = "Envelope C1";
"Envelope C2" = "Envelope C2";
"Envelope C3" = "Envelope C3";
"Envelope C4" = "Envelope C4";
"Envelope C5" = "Envelope C5";
"Envelope C6" = "Envelope C6";
"Envelope C65" = "Envelope C65";
"Envelope C7" = "Envelope C7";
"Envelope Choukei 3" = "Envelope Choukei 3";
"Envelope Choukei 3 Long Edge" = "Envelope Choukei 3 Long Edge";
"Envelope Choukei 4" = "Envelope Choukei 4";
"Envelope Choukei 4 Long Edge" = "Envelope Choukei 4 Long Edge";
"Envelope DL" = "Envelope DL";
"Envelope Feed" = "Envelope Feed";
"Envelope Invite" = "Envelope Invite";
"Envelope Italian" = "Envelope Italian";
"Envelope Kaku2" = "Envelope Kaku2";
"Envelope Kaku2 Long Edge" = "Envelope Kaku2 Long Edge";
"Envelope Kaku3" = "Envelope Kaku3";
"Envelope Kaku3 Long Edge" = "Envelope Kaku3 Long Edge";
"Envelope Monarch" = "Envelope Monarch";
"Envelope PRC1" = "Envelope PRC1";
"Envelope PRC1 Long Edge" = "Envelope PRC1 Long Edge";
"Envelope PRC10" = "Envelope PRC10";
"Envelope PRC10 Long Edge" = "Envelope PRC10 Long Edge";
"Envelope PRC2" = "Envelope PRC2";
"Envelope PRC2 Long Edge" = "Envelope PRC2 Long Edge";
"Envelope PRC3" = "Envelope PRC3";
"Envelope PRC3 Long Edge" = "Envelope PRC3 Long Edge";
"Envelope PRC4" = "Envelope PRC4";
"Envelope PRC4 Long Edge" = "Envelope PRC4 Long Edge";
"Envelope PRC5 Long Edge" = "Envelope PRC5 Long Edge";
"Envelope PRC5PRC5" = "Envelope PRC5PRC5";
"Envelope PRC6" = "Envelope PRC6";
"Envelope PRC6 Long Edge" = "Envelope PRC6 Long Edge";
"Envelope PRC7" = "Envelope PRC7";
"Envelope PRC7 Long Edge" = "Envelope PRC7 Long Edge";
"Envelope PRC8" = "Envelope PRC8";
"Envelope PRC8 Long Edge" = "Envelope PRC8 Long Edge";
"Envelope PRC9" = "Envelope PRC9";
"Envelope PRC9 Long Edge" = "Envelope PRC9 Long Edge";
"Envelope Personal" = "Envelope Personal";
"Envelope You4" = "Envelope You4";
"Envelope You4 Long Edge" = "Envelope You4 Long Edge";
"Environment Variables:" = "Environment Variables:";
"Epson" = "Epson";
"Error Policy" = "Error Policy";
"Error reading raster data." = "Error reading raster data.";
"Error sending raster data." = "Error sending raster data.";
"Error: need hostname after \"-h\" option." = "Error: need hostname after “-h” option.";
"European Fanfold" = "European Fanfold";
"European Fanfold Legal" = "European Fanfold Legal";
"Every 10 Labels" = "Every 10 Labels";
"Every 2 Labels" = "Every 2 Labels";
"Every 3 Labels" = "Every 3 Labels";
"Every 4 Labels" = "Every 4 Labels";
"Every 5 Labels" = "Every 5 Labels";
"Every 6 Labels" = "Every 6 Labels";
"Every 7 Labels" = "Every 7 Labels";
"Every 8 Labels" = "Every 8 Labels";
"Every 9 Labels" = "Every 9 Labels";
"Every Label" = "Every Label";
"Everyday Glossy Photo Paper" = "Everyday Glossy Photo Paper";
"Everyday Matte Paper" = "Everyday Matte Paper";
"Executive" = "Executive";
"Expectation Failed" = "Expectation Failed";
"Export Printers to Samba" = "Export Printers to Samba";
"Expressions:" = "Expressions:";
"Extra Heavyweight Paper" = "Extra Heavyweight Paper";
"FAIL" = "FAIL";
"Fabric" = "Fabric";
"Face Down" = "Face Down";
"Face Up" = "Face Up";
"Fast Grayscale" = "Fast Grayscale";
"File \"%s\" contains a relative path." = "File “%s” contains a relative path.";
"File \"%s\" has insecure permissions (0%o/uid=%d/gid=%d)." = "File “%s” has insecure permissions (0%o/uid=%d/gid=%d).";
"File \"%s\" is a directory." = "File “%s” is a directory.";
"File \"%s\" not available: %s" = "File “%s” not available: %s";
"File \"%s\" permissions OK (0%o/uid=%d/gid=%d)." = "File “%s” permissions OK (0%o/uid=%d/gid=%d).";
"File Folder" = "File Folder";
"File device URIs have been disabled. To enable, see the FileDevice directive in \"%s/cups-files.conf\"." = "File device URIs have been disabled. To enable, see the FileDevice directive in “%s/cups-files.conf”.";
"Film" = "Film";
"Fine Envelope" = "Fine Envelope";
"Finished page %d." = "Finished page %d.";
"Flexo Base" = "Flexo Base";
"Flexo Photo Polymer" = "Flexo Photo Polymer";
"Flute" = "Flute";
"Foil" = "Foil";
"Fold" = "Fold";
"Folio" = "Folio";
"Forbidden" = "Forbidden";
"Full Cut Tabs" = "Full Cut Tabs";
"Gate Fold" = "Gate Fold";
"General" = "General";
"Generic" = "Generic";
"Get-Response-PDU uses indefinite length" = "Get-Response-PDU uses indefinite length";
"Glass" = "Glass";
"Glass Colored" = "Glass Colored";
"Glass Opaque" = "Glass Opaque";
"Glass Surfaced" = "Glass Surfaced";
"Glass Textured" = "Glass Textured";
"Glossy Brochure Paper" = "Glossy Brochure Paper";
"Glossy Fabric" = "Glossy Fabric";
"Glossy Labels" = "Glossy Labels";
"Glossy Optical Disc" = "Glossy Optical Disc";
"Glossy Paper" = "Glossy Paper";
"Glossy Photo Paper" = "Glossy Photo Paper";
"Got a printer-uri attribute but no job-id." = "Got a printer-uri attribute but no job-id.";
"Gravure Cylinder" = "Gravure Cylinder";
"Grayscale" = "Grayscale";
"HP" = "HP";
"Hagaki" = "Hagaki";
"Half Fold" = "Half Fold";
"Half Z Fold" = "Half Z Fold";
"Hanging Folder" = "Hanging Folder";
"Hash buffer too small." = "Hash buffer too small.";
"Heavyweight Coated Paper" = "Heavyweight Coated Paper";
"Heavyweight Envelope" = "Heavyweight Envelope";
"Heavyweight Paper" = "Heavyweight Paper";
"Help file not in index." = "Help file not in index.";
"High" = "High";
"High Gloss Fabric" = "High Gloss Fabric";
"High Gloss Labels" = "High Gloss Labels";
"High Gloss Optical Disc" = "High Gloss Optical Disc";
"High Gloss Photo Paper" = "High Gloss Photo Paper";
"IPP 1setOf attribute with incompatible value tags." = "IPP 1setOf attribute with incompatible value tags.";
"IPP attribute has no name." = "IPP attribute has no name.";
"IPP attribute is not a member of the message." = "IPP attribute is not a member of the message.";
"IPP begCollection value not 0 bytes." = "IPP begCollection value not 0 bytes.";
"IPP boolean value not 1 byte." = "IPP boolean value not 1 byte.";
"IPP date value not 11 bytes." = "IPP date value not 11 bytes.";
"IPP endCollection value not 0 bytes." = "IPP endCollection value not 0 bytes.";
"IPP enum value not 4 bytes." = "IPP enum value not 4 bytes.";
"IPP extension tag larger than 0x7FFFFFFF." = "IPP extension tag larger than 0x7FFFFFFF.";
"IPP integer value not 4 bytes." = "IPP integer value not 4 bytes.";
"IPP language length overflows value." = "IPP language length overflows value.";
"IPP language length too large." = "IPP language length too large.";
"IPP member name is not empty." = "IPP member name is not empty.";
"IPP memberName value is empty." = "IPP memberName value is empty.";
"IPP memberName with no attribute." = "IPP memberName with no attribute.";
"IPP name larger than 32767 bytes." = "IPP name larger than 32767 bytes.";
"IPP nameWithLanguage value less than minimum 4 bytes." = "IPP nameWithLanguage value less than minimum 4 bytes.";
"IPP octetString length too large." = "IPP octetString length too large.";
"IPP rangeOfInteger value not 8 bytes." = "IPP rangeOfInteger value not 8 bytes.";
"IPP resolution value not 9 bytes." = "IPP resolution value not 9 bytes.";
"IPP string length overflows value." = "IPP string length overflows value.";
"IPP textWithLanguage value less than minimum 4 bytes." = "IPP textWithLanguage value less than minimum 4 bytes.";
"IPP value larger than 32767 bytes." = "IPP value larger than 32767 bytes.";
"ISOLatin1" = "ISOLatin1";
"Illegal control character" = "Illegal control character";
"Illegal main keyword string" = "Illegal main keyword string";
"Illegal option keyword string" = "Illegal option keyword string";
"Illegal translation string" = "Illegal translation string";
"Illegal whitespace character" = "Illegal whitespace character";
"Image Setter Paper" = "Image Setter Paper";
"Imaging Cylinder" = "Imaging Cylinder";
"Inkjet Envelope" = "Inkjet Envelope";
"Inkjet Labels" = "Inkjet Labels";
"Inkjet Paper" = "Inkjet Paper";
"Installable Options" = "Installable Options";
"Installed" = "Installed";
"IntelliBar Label Printer" = "IntelliBar Label Printer";
"Intellitech" = "Intellitech";
"Internal Server Error" = "Internal Server Error";
"Internal error" = "Internal error";
"Internet Postage 2-Part" = "Internet Postage 2-Part";
"Internet Postage 3-Part" = "Internet Postage 3-Part";
"Internet Printing Protocol" = "Internet Printing Protocol";
"Invalid media name arguments." = "Invalid media name arguments.";
"Invalid media size." = "Invalid media size.";
"Invalid ppd-name value." = "Invalid ppd-name value.";
"Invalid printer command \"%s\"." = "Invalid printer command “%s”.";
"JCL" = "JCL";
"JIS B0" = "JIS B0";
"JIS B1" = "JIS B1";
"JIS B10" = "JIS B10";
"JIS B2" = "JIS B2";
"JIS B3" = "JIS B3";
"JIS B4" = "JIS B4";
"JIS B4 Long Edge" = "JIS B4 Long Edge";
"JIS B5" = "JIS B5";
"JIS B5 Long Edge" = "JIS B5 Long Edge";
"JIS B6" = "JIS B6";
"JIS B6 Long Edge" = "JIS B6 Long Edge";
"JIS B7" = "JIS B7";
"JIS B8" = "JIS B8";
"JIS B9" = "JIS B9";
"Job #%d cannot be restarted - no files." = "Job #%d cannot be restarted - no files.";
"Job #%d does not exist." = "Job #%d does not exist.";
"Job #%d is already aborted - can't cancel." = "Job #%d is already aborted - can’t cancel.";
"Job #%d is already canceled - can't cancel." = "Job #%d is already canceled - can’t cancel.";
"Job #%d is already completed - can't cancel." = "Job #%d is already completed - can’t cancel.";
"Job #%d is finished and cannot be altered." = "Job #%d is finished and cannot be altered.";
"Job #%d is not complete." = "Job #%d is not complete.";
"Job #%d is not held for authentication." = "Job #%d is not held for authentication.";
"Job #%d is not held." = "Job #%d is not held.";
"Job Completed" = "Job Completed";
"Job Created" = "Job Created";
"Job Options Changed" = "Job Options Changed";
"Job Stopped" = "Job Stopped";
"Job is completed and cannot be changed." = "Job is completed and cannot be changed.";
"Job operation failed" = "Job operation failed";
"Job state cannot be changed." = "Job state cannot be changed.";
"Job subscriptions cannot be renewed." = "Job subscriptions cannot be renewed.";
"Jobs" = "Jobs";
"Jog" = "Jog";
"LPD/LPR Host or Printer" = "LPD/LPR Host or Printer";
"Label Printer" = "Label Printer";
"Label Top" = "Label Top";
"Labels" = "Labels";
"Laminate" = "Laminate";
"Laminating Foil" = "Laminating Foil";
"Language \"%s\" not supported." = "Language “%s” not supported.";
"Large Address" = "Large Address";
"Large Capacity" = "Large Capacity";
"Large Capacity Tray" = "Large Capacity Tray";
"LaserJet Series PCL 4/5" = "LaserJet Series PCL 4/5";
"Left" = "Left";
"Left Gate Fold" = "Left Gate Fold";
"Left Tray" = "Left Tray";
"Letter Fold" = "Letter Fold";
"Letter Oversize" = "Letter Oversize";
"Letter Oversize Long Edge" = "Letter Oversize Long Edge";
"Letterhead" = "Letterhead";
"Light" = "Light";
"Lightweight Envelope" = "Lightweight Envelope";
"Lightweight Paper" = "Lightweight Paper";
"Line longer than the maximum allowed (255 characters)" = "Line longer than the maximum allowed (255 characters)";
"List Available Printers" = "List Available Printers";
"Load paper." = "Load paper.";
"Local printer created." = "Local printer created.";
"Long-Edge (Portrait)" = "Long-Edge (Portrait)";
"Looking for printer." = "Looking for printer.";
"Mailbox 1" = "Mailbox 1";
"Mailbox 10" = "Mailbox 10";
"Mailbox 2" = "Mailbox 2";
"Mailbox 3" = "Mailbox 3";
"Mailbox 4" = "Mailbox 4";
"Mailbox 5" = "Mailbox 5";
"Mailbox 6" = "Mailbox 6";
"Mailbox 7" = "Mailbox 7";
"Mailbox 8" = "Mailbox 8";
"Mailbox 9" = "Mailbox 9";
"Main" = "Main";
"Main Roll" = "Main Roll";
"Manual" = "Manual";
"Manual Feed" = "Manual Feed";
"Matte Brochure Paper" = "Matte Brochure Paper";
"Matte Cover Paper" = "Matte Cover Paper";
"Matte Fabric" = "Matte Fabric";
"Matte Labels" = "Matte Labels";
"Matte Optical Disc" = "Matte Optical Disc";
"Matte Photo Paper" = "Matte Photo Paper";
"Media Size" = "Media Size";
"Media Source" = "Media Source";
"Media Tracking" = "Media Tracking";
"Media Type" = "Media Type";
"Medium" = "Medium";
"Memory allocation error" = "Memory allocation error";
"Metal" = "Metal";
"Metal Glossy" = "Metal Glossy";
"Metal High Gloss" = "Metal High Gloss";
"Metal Matte" = "Metal Matte";
"Metal Satin" = "Metal Satin";
"Metal Semi Gloss" = "Metal Semi Gloss";
"Mid-Weight Paper" = "Mid-Weight Paper";
"Middle" = "Middle";
"Missing CloseGroup" = "Missing CloseGroup";
"Missing PPD-Adobe-4.x header" = "Missing PPD-Adobe-4.x header";
"Missing asterisk in column 1" = "Missing asterisk in column 1";
"Missing document-number attribute." = "Missing document-number attribute.";
"Missing double quote on line %d." = "Missing double quote on line %d.";
"Missing form variable" = "Missing form variable";
"Missing last-document attribute in request." = "Missing last-document attribute in request.";
"Missing media or media-col." = "Missing media or media-col.";
"Missing media-size in media-col." = "Missing media-size in media-col.";
"Missing notify-subscription-ids attribute." = "Missing notify-subscription-ids attribute.";
"Missing option keyword" = "Missing option keyword";
"Missing requesting-user-name attribute." = "Missing requesting-user-name attribute.";
"Missing required attribute \"%s\"." = "Missing required attribute “%s”.";
"Missing required attributes." = "Missing required attributes.";
"Missing resource in URI" = "Missing resource in URI";
"Missing scheme in URI" = "Missing scheme in URI";
"Missing value on line %d." = "Missing value on line %d.";
"Missing value string" = "Missing value string";
"Missing x-dimension in media-size." = "Missing x-dimension in media-size.";
"Missing y-dimension in media-size." = "Missing y-dimension in media-size.";
"Model:  name = %s\n        natural_language = %s\n        make-and-model = %s\n        device-id = %s" = "Model:  name = %s\n        natural_language = %s\n        make-and-model = %s\n        device-id = %s";
"Modifiers:" = "Modifiers:";
"Modify Class" = "Modify Class";
"Modify Printer" = "Modify Printer";
"Mounting Tape" = "Mounting Tape";
"Move All Jobs" = "Move All Jobs";
"Move Job" = "Move Job";
"Moved Permanently" = "Moved Permanently";
"Multi Layer" = "Multi Layer";
"Multi Part Form" = "Multi Part Form";
"Multi-Hole Punch (Landscape)" = "Multi-Hole Punch (Landscape)";
"Multi-Hole Punch (Portrait)" = "Multi-Hole Punch (Portrait)";
"Multi-Hole Punch (Reverse Landscape)" = "Multi-Hole Punch (Reverse Landscape)";
"Multi-Hole Punch (Reverse Portrait)" = "Multi-Hole Punch (Reverse Portrait)";
"Multipurpose" = "Multipurpose";
"Multipurpose Paper" = "Multipurpose Paper";
"My Mailbox" = "My Mailbox";
"NULL PPD file pointer" = "NULL PPD file pointer";
"Name OID uses indefinite length" = "Name OID uses indefinite length";
"Nested classes are not allowed." = "Nested classes are not allowed.";
"Never" = "Never";
"New credentials are not valid for name." = "New credentials are not valid for name.";
"New credentials are older than stored credentials." = "New credentials are older than stored credentials.";
"No" = "No";
"No Content" = "No Content";
"No IPP attributes." = "No IPP attributes.";
"No PPD name" = "No PPD name";
"No VarBind SEQUENCE" = "No VarBind SEQUENCE";
"No Windows printer drivers are installed." = "No Windows printer drivers are installed.";
"No active connection" = "No active connection";
"No active connection." = "No active connection.";
"No active jobs on %s." = "No active jobs on %s.";
"No attributes in request." = "No attributes in request.";
"No authentication information provided." = "No authentication information provided.";
"No common name specified." = "No common name specified.";
"No community name" = "No community name";
"No default printer." = "No default printer.";
"No destinations added." = "No destinations added.";
"No device URI found in argv[0] or in DEVICE_URI environment variable." = "No device URI found in argv[0] or in DEVICE_URI environment variable.";
"No error-index" = "No error-index";
"No error-status" = "No error-status";
"No file in print request." = "No file in print request.";
"No modification time" = "No modification time";
"No name OID" = "No name OID";
"No pages were found." = "No pages were found.";
"No printer name" = "No printer name";
"No printer-uri found" = "No printer-uri found";
"No printer-uri found for class" = "No printer-uri found for class";
"No printer-uri in request." = "No printer-uri in request.";
"No request URI." = "No request URI.";
"No request protocol version." = "No request protocol version.";
"No request sent." = "No request sent.";
"No request-id" = "No request-id";
"No stored credentials, not valid for name." = "No stored credentials, not valid for name.";
"No subscription attributes in request." = "No subscription attributes in request.";
"No subscriptions found." = "No subscriptions found.";
"No variable-bindings SEQUENCE" = "No variable-bindings SEQUENCE";
"No version number" = "No version number";
"Non-continuous (Mark sensing)" = "Non-continuous (Mark sensing)";
"Non-continuous (Web sensing)" = "Non-continuous (Web sensing)";
"None" = "None";
"Normal" = "Normal";
"Not Found" = "Not Found";
"Not Implemented" = "Not Implemented";
"Not Installed" = "Not Installed";
"Not Modified" = "Not Modified";
"Not Supported" = "Not Supported";
"Not allowed to print." = "Not allowed to print.";
"Note" = "Note";
"Note: this program only validates the DSC comments, not the PostScript itself." = "Note: this program only validates the DSC comments, not the PostScript itself.";
"OK" = "OK";
"Off (1-Sided)" = "Off (1-Sided)";
"Office Recycled Paper" = "Office Recycled Paper";
"Oki" = "Oki";
"Online Help" = "Online Help";
"Only local users can create a local printer." = "Only local users can create a local printer.";
"Open of %s failed: %s" = "Open of %s failed: %s";
"OpenGroup without a CloseGroup first" = "OpenGroup without a CloseGroup first";
"OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first" = "OpenUI/JCLOpenUI without a CloseUI/JCLCloseUI first";
"Operation Policy" = "Operation Policy";
"Optical Disc" = "Optical Disc";
"Option \"%s\" cannot be included via %%%%IncludeFeature." = "Option “%s” cannot be included via %%%%IncludeFeature.";
"Options Installed" = "Options Installed";
"Options:" = "Options:";
"Other" = "Other";
"Out of date PPD cache file." = "Out of date PPD cache file.";
"Out of memory." = "Out of memory.";
"Output Mode" = "Output Mode";
"Output bin is almost full." = "Output bin is almost full.";
"Output bin is full." = "Output bin is full.";
"Output bin is missing." = "Output bin is missing.";
"PASS" = "PASS";
"PCL Laser Printer" = "PCL Laser Printer";
"PRC16K" = "PRC16K";
"PRC16K Long Edge" = "PRC16K Long Edge";
"PRC32K" = "PRC32K";
"PRC32K Long Edge" = "PRC32K Long Edge";
"PRC32K Oversize" = "PRC32K Oversize";
"PRC32K Oversize Long Edge" = "PRC32K Oversize Long Edge";
"Packet does not contain a Get-Response-PDU" = "Packet does not contain a Get-Response-PDU";
"Packet does not start with SEQUENCE" = "Packet does not start with SEQUENCE";
"Paper" = "Paper";
"Paper jam." = "Paper jam.";
"Paper tray is almost empty." = "Paper tray is almost empty.";
"Paper tray is empty." = "Paper tray is empty.";
"Paper tray is missing." = "Paper tray is missing.";
"Parallel Fold" = "Parallel Fold";
"ParamCustominCutInterval" = "ParamCustominCutInterval";
"ParamCustominTearInterval" = "ParamCustominTearInterval";
"Password for %s on %s? " = "Password for %s on %s? ";
"Password for %s required to access %s via SAMBA: " = "Password for %s required to access %s via SAMBA: ";
"Pause Class" = "Pause Class";
"Pause Printer" = "Pause Printer";
"Peel-Off" = "Peel-Off";
"Permanent Labels" = "Permanent Labels";
"Photo" = "Photo";
"Photo Film" = "Photo Film";
"Photo Labels" = "Photo Labels";
"Photo Paper" = "Photo Paper";
"Photo Paper Plus Glossy II" = "Photo Paper Plus Glossy II";
"Photo Paper Pro Platinum" = "Photo Paper Pro Platinum";
"Plain Envelope" = "Plain Envelope";
"Plain Paper" = "Plain Paper";
"Plastic" = "Plastic";
"Plastic Archival" = "Plastic Archival";
"Plastic Colored" = "Plastic Colored";
"Plastic Glossy" = "Plastic Glossy";
"Plastic High Gloss" = "Plastic High Gloss";
"Plastic Matte" = "Plastic Matte";
"Plastic Satin" = "Plastic Satin";
"Plastic Semi Gloss" = "Plastic Semi Gloss";
"Plate" = "Plate";
"Policies" = "Policies";
"Polyester" = "Polyester";
"Port Monitor" = "Port Monitor";
"PostScript Printer" = "PostScript Printer";
"Postcard" = "Postcard";
"Postcard Double" = "Postcard Double";
"Postcard Double Long Edge" = "Postcard Double Long Edge";
"Postcard Long Edge" = "Postcard Long Edge";
"Poster Fold" = "Poster Fold";
"Pre Cut Tabs" = "Pre Cut Tabs";
"Premium Inkjet Paper" = "Premium Inkjet Paper";
"Premium Photo Glossy Paper" = "Premium Photo Glossy Paper";
"Premium Presentation Matte Paper" = "Premium Presentation Matte Paper";
"Preparing to print." = "Preparing to print.";
"Preprinted Envelope" = "Preprinted Envelope";
"Preprinted Paper" = "Preprinted Paper";
"Print Density" = "Print Density";
"Print Job:" = "Print Job:";
"Print Mode" = "Print Mode";
"Print Quality" = "Print Quality";
"Print Rate" = "Print Rate";
"Print Self-Test Page" = "Print Self-Test Page";
"Print Speed" = "Print Speed";
"Print Test Page" = "Print Test Page";
"Print and Cut" = "Print and Cut";
"Print and Tear" = "Print and Tear";
"Print file sent." = "Print file sent.";
"Print job canceled at printer." = "Print job canceled at printer.";
"Print job too large." = "Print job too large.";
"Print job was not accepted." = "Print job was not accepted.";
"Printer \"%s\" already exists." = "Printer “%s” already exists.";
"Printer Added" = "Printer Added";
"Printer Default" = "Printer Default";
"Printer Deleted" = "Printer Deleted";
"Printer Modified" = "Printer Modified";
"Printer Paused" = "Printer Paused";
"Printer Settings" = "Printer Settings";
"Printer cannot print supplied content." = "Printer cannot print supplied content.";
"Printer cannot print with supplied options." = "Printer cannot print with supplied options.";
"Printer does not support required IPP attributes or document formats." = "Printer does not support required IPP attributes or document formats.";
"Printer:" = "Printer:";
"Printers" = "Printers";
"Printing page %d, %u%% complete." = "Printing page %d, %u%% complete.";
"Punch" = "Punch";
"Punched Paper" = "Punched Paper";
"Quarto" = "Quarto";
"Quota limit reached." = "Quota limit reached.";
"Rank    Owner   Job     File(s)                         Total Size" = "Rank    Owner   Job     File(s)                         Total Size";
"Rear" = "Rear";
"Rear Tray" = "Rear Tray";
"Reject Jobs" = "Reject Jobs";
"Remote host did not accept control file (%d)." = "Remote host did not accept control file (%d).";
"Remote host did not accept data file (%d)." = "Remote host did not accept data file (%d).";
"Reprint After Error" = "Reprint After Error";
"Request Entity Too Large" = "Request Entity Too Large";
"Resolution" = "Resolution";
"Resume Class" = "Resume Class";
"Resume Printer" = "Resume Printer";
"Return Address" = "Return Address";
"Rewind" = "Rewind";
"Right" = "Right";
"Right Gate Fold" = "Right Gate Fold";
"Right Tray" = "Right Tray";
"Roll" = "Roll";
"Roll 1" = "Roll 1";
"Roll 10" = "Roll 10";
"Roll 2" = "Roll 2";
"Roll 3" = "Roll 3";
"Roll 4" = "Roll 4";
"Roll 5" = "Roll 5";
"Roll 6" = "Roll 6";
"Roll 7" = "Roll 7";
"Roll 8" = "Roll 8";
"Roll 9" = "Roll 9";
"Running command: %s %s -N -A %s -c '%s'" = "Running command: %s %s -N -A %s -c ‘%s’";
"SEQUENCE uses indefinite length" = "SEQUENCE uses indefinite length";
"SSL/TLS Negotiation Error" = "SSL/TLS Negotiation Error";
"Saddle Stitch" = "Saddle Stitch";
"Satin Labels" = "Satin Labels";
"Satin Optical Disc" = "Satin Optical Disc";
"Satin Photo Paper" = "Satin Photo Paper";
"Screen" = "Screen";
"Screen Paged" = "Screen Paged";
"Security Labels" = "Security Labels";
"See Other" = "See Other";
"See remote printer." = "See remote printer.";
"Self Adhesive" = "Self Adhesive";
"Self Adhesive Film" = "Self Adhesive Film";
"Self-signed credentials are blocked." = "Self-signed credentials are blocked.";
"Semi-Gloss Fabric" = "Semi-Gloss Fabric";
"Semi-Gloss Labels" = "Semi-Gloss Labels";
"Semi-Gloss Optical Disc" = "Semi-Gloss Optical Disc";
"Semi-Gloss Photo Paper" = "Semi-Gloss Photo Paper";
"Sending data to printer." = "Sending data to printer.";
"Server Restarted" = "Server Restarted";
"Server Security Auditing" = "Server Security Auditing";
"Server Started" = "Server Started";
"Server Stopped" = "Server Stopped";
"Server credentials not set." = "Server credentials not set.";
"Service Unavailable" = "Service Unavailable";
"Set Allowed Users" = "Set Allowed Users";
"Set As Server Default" = "Set As Server Default";
"Set Class Options" = "Set Class Options";
"Set Printer Options" = "Set Printer Options";
"Set Publishing" = "Set Publishing";
"Shipping Address" = "Shipping Address";
"Short-Edge (Landscape)" = "Short-Edge (Landscape)";
"Shrink Foil" = "Shrink Foil";
"Side" = "Side";
"Side Tray" = "Side Tray";
"Single Face" = "Single Face";
"Single Punch (Landscape)" = "Single Punch (Landscape)";
"Single Punch (Portrait)" = "Single Punch (Portrait)";
"Single Punch (Reverse Landscape)" = "Single Punch (Reverse Landscape)";
"Single Punch (Reverse Portrait)" = "Single Punch (Reverse Portrait)";
"Single Staple (Landscape)" = "Single Staple (Landscape)";
"Single Staple (Portrait)" = "Single Staple (Portrait)";
"Single Staple (Reverse Landscape)" = "Single Staple (Reverse Landscape)";
"Single Staple (Reverse Portrait)" = "Single Staple (Reverse Portrait)";
"Single Wall Cardboard" = "Single Wall Cardboard";
"Sleeve" = "Sleeve";
"Special Paper" = "Special Paper";
"Spooling job, %.0f%% complete." = "Spooling job, %.0f%% complete.";
"Stacker 1" = "Stacker 1";
"Stacker 10" = "Stacker 10";
"Stacker 2" = "Stacker 2";
"Stacker 3" = "Stacker 3";
"Stacker 4" = "Stacker 4";
"Stacker 5" = "Stacker 5";
"Stacker 6" = "Stacker 6";
"Stacker 7" = "Stacker 7";
"Stacker 8" = "Stacker 8";
"Stacker 9" = "Stacker 9";
"Standard" = "Standard";
"Staple" = "Staple";
"Staple Edge" = "Staple Edge";
"Staple Edge (Landscape)" = "Staple Edge (Landscape)";
"Staple Edge (Portrait)" = "Staple Edge (Portrait)";
"Staple Edge (Reverse Landscape)" = "Staple Edge (Reverse Landscape)";
"Staple Edge (Reverse Portrait)" = "Staple Edge (Reverse Portrait)";
// TRANSLATORS: Banner/cover sheet before the print job.
"Starting Banner" = "Starting Banner";
"Starting page %d." = "Starting page %d.";
"Statement" = "Statement";
"Subscription #%d does not exist." = "Subscription #%d does not exist.";
"Substitutions:" = "Substitutions:";
"Super A" = "Super A";
"Super B" = "Super B";
"Super B/A3" = "Super B/A3";
"Switching Protocols" = "Switching Protocols";
"Tab Stock" = "Tab Stock";
"Tabloid" = "Tabloid";
"Tabloid Oversize" = "Tabloid Oversize";
"Tabloid Oversize Long Edge" = "Tabloid Oversize Long Edge";
"Tear" = "Tear";
"Tear-Off" = "Tear-Off";
"Tear-Off Adjust Position" = "Tear-Off Adjust Position";
"The \"%s\" attribute is required for print jobs." = "The “%s” attribute is required for print jobs.";
"The %s attribute cannot be provided with job-ids." = "The %s attribute cannot be provided with job-ids.";
"The '%s' Job Status attribute cannot be supplied in a job creation request." = "The ‘%s’ Job Status attribute cannot be supplied in a job creation request.";
"The '%s' operation attribute cannot be supplied in a Create-Job request." = "The ‘%s’ operation attribute cannot be supplied in a Create-Job request.";
"The PPD file \"%s\" could not be found." = "The PPD file “%s” could not be found.";
"The PPD file \"%s\" could not be opened: %s" = "The PPD file “%s” could not be opened: %s";
"The PPD file could not be opened." = "The PPD file could not be opened.";
"The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The class name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#).";
"The developer unit needs to be replaced." = "The developer unit needs to be replaced.";
"The developer unit will need to be replaced soon." = "The developer unit will need to be replaced soon.";
"The fuser's temperature is high." = "The fuser’s temperature is high.";
"The fuser's temperature is low." = "The fuser’s temperature is low.";
"The notify-lease-duration attribute cannot be used with job subscriptions." = "The notify-lease-duration attribute cannot be used with job subscriptions.";
"The notify-user-data value is too large (%d > 63 octets)." = "The notify-user-data value is too large (%d > 63 octets).";
"The optical photoconductor needs to be replaced." = "The optical photoconductor needs to be replaced.";
"The optical photoconductor will need to be replaced soon." = "The optical photoconductor will need to be replaced soon.";
"The printer configuration is incorrect or the printer no longer exists." = "The printer configuration is incorrect or the printer no longer exists.";
"The printer did not respond." = "The printer did not respond.";
"The printer is in use." = "The printer is in use.";
"The printer is low on ink." = "The printer is low on ink.";
"The printer is low on toner." = "The printer is low on toner.";
"The printer is not connected." = "The printer is not connected.";
"The printer is not responding." = "The printer is not responding.";
"The printer is now connected." = "The printer is now connected.";
"The printer is now online." = "The printer is now online.";
"The printer is offline." = "The printer is offline.";
"The printer is unreachable at this time." = "The printer is unreachable at this time.";
"The printer may be out of ink." = "The printer may be out of ink.";
"The printer may be out of toner." = "The printer may be out of toner.";
"The printer may not exist or is unavailable at this time." = "The printer may not exist or is unavailable at this time.";
"The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#)." = "The printer name may only contain up to 127 printable characters and may not contain spaces, slashes (/), or the pound sign (#).";
"The printer or class does not exist." = "The printer or class does not exist.";
"The printer or class is not shared." = "The printer or class is not shared.";
"The printer's cover is open." = "The printer’s cover is open.";
"The printer's door is open." = "The printer’s door is open.";
"The printer's interlock is open." = "The printer’s interlock is open.";
"The printer's waste bin is almost full." = "The printer’s waste bin is almost full.";
"The printer's waste bin is full." = "The printer’s waste bin is full.";
"The printer-uri \"%s\" contains invalid characters." = "The printer-uri “%s” contains invalid characters.";
"The printer-uri attribute is required." = "The printer-uri attribute is required.";
"The printer-uri must be of the form \"ipp://HOSTNAME/classes/CLASSNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/classes/CLASSNAME”.";
"The printer-uri must be of the form \"ipp://HOSTNAME/printers/PRINTERNAME\"." = "The printer-uri must be of the form “ipp://HOSTNAME/printers/PRINTERNAME”.";
"The subscription name may not contain spaces, slashes (/), question marks (?), or the pound sign (#)." = "The subscription name may not contain spaces, slashes (/), question marks (?), or the pound sign (#).";
"The web interface is currently disabled. Run \"cupsctl WebInterface=yes\" to enable it." = "The web interface is currently disabled. Run “cupsctl WebInterface=yes” to enable it.";
"The which-jobs value \"%s\" is not supported." = "The which-jobs value “%s” is not supported.";
"There are too many subscriptions." = "There are too many subscriptions.";
"There was an unrecoverable USB error." = "There was an unrecoverable USB error.";
"Thermal Transfer Media" = "Thermal Transfer Media";
"Too many active jobs." = "Too many active jobs.";
"Too many job-sheets values (%d > 2)." = "Too many job-sheets values (%d > 2).";
"Too many printer-state-reasons values (%d > %d)." = "Too many printer-state-reasons values (%d > %d).";
"Top" = "Top";
"Top Tray" = "Top Tray";
"Tractor" = "Tractor";
"Transfer" = "Transfer";
"Transparency" = "Transparency";
"Tray" = "Tray";
"Tray 1" = "Tray 1";
"Tray 10" = "Tray 10";
"Tray 11" = "Tray 11";
"Tray 12" = "Tray 12";
"Tray 13" = "Tray 13";
"Tray 14" = "Tray 14";
"Tray 15" = "Tray 15";
"Tray 16" = "Tray 16";
"Tray 17" = "Tray 17";
"Tray 18" = "Tray 18";
"Tray 19" = "Tray 19";
"Tray 2" = "Tray 2";
"Tray 20" = "Tray 20";
"Tray 3" = "Tray 3";
"Tray 4" = "Tray 4";
"Tray 5" = "Tray 5";
"Tray 6" = "Tray 6";
"Tray 7" = "Tray 7";
"Tray 8" = "Tray 8";
"Tray 9" = "Tray 9";
"Triple Staple (Landscape)" = "Triple Staple (Landscape)";
"Triple Staple (Portrait)" = "Triple Staple (Portrait)";
"Triple Staple (Reverse Landscape)" = "Triple Staple (Reverse Landscape)";
"Triple Staple (Reverse Portrait)" = "Triple Staple (Reverse Portrait)";
"Triple Wall Cardboard" = "Triple Wall Cardboard";
"Trust on first use is disabled." = "Trust on first use is disabled.";
"URI Too Long" = "URI Too Long";
"URI too large" = "URI too large";
"US Fanfold" = "US Fanfold";
"US Ledger" = "US Ledger";
"US Legal" = "US Legal";
"US Legal Oversize" = "US Legal Oversize";
"US Letter" = "US Letter";
"US Letter Long Edge" = "US Letter Long Edge";
"US Letter Oversize" = "US Letter Oversize";
"US Letter Oversize Long Edge" = "US Letter Oversize Long Edge";
"US Letter Small" = "US Letter Small";
"Unable to access cupsd.conf file" = "Unable to access cupsd.conf file";
"Unable to access help file." = "Unable to access help file.";
"Unable to add RSS subscription" = "Unable to add RSS subscription";
"Unable to add class" = "Unable to add class";
"Unable to add document to print job." = "Unable to add document to print job.";
"Unable to add job for destination \"%s\"." = "Unable to add job for destination “%s”.";
"Unable to add printer" = "Unable to add printer";
"Unable to allocate memory for file types." = "Unable to allocate memory for file types.";
"Unable to allocate memory for page info" = "Unable to allocate memory for page info";
"Unable to allocate memory for pages array" = "Unable to allocate memory for pages array";
"Unable to cancel RSS subscription" = "Unable to cancel RSS subscription";
"Unable to cancel print job." = "Unable to cancel print job.";
"Unable to change printer" = "Unable to change printer";
"Unable to change printer-is-shared attribute" = "Unable to change printer-is-shared attribute";
"Unable to change server settings" = "Unable to change server settings";
"Unable to compile mimeMediaType regular expression: %s." = "Unable to compile mimeMediaType regular expression: %s.";
"Unable to compile naturalLanguage regular expression: %s." = "Unable to compile naturalLanguage regular expression: %s.";
"Unable to configure printer options." = "Unable to configure printer options.";
"Unable to connect to host." = "Unable to connect to host.";
"Unable to contact printer, queuing on next printer in class." = "Unable to contact printer, queuing on next printer in class.";
"Unable to copy 64-bit CUPS printer driver files (%d)." = "Unable to copy 64-bit CUPS printer driver files (%d).";
"Unable to copy 64-bit Windows printer driver files (%d)." = "Unable to copy 64-bit Windows printer driver files (%d).";
"Unable to copy CUPS printer driver files (%d)." = "Unable to copy CUPS printer driver files (%d).";
"Unable to copy PPD file - %s" = "Unable to copy PPD file - %s";
"Unable to copy PPD file." = "Unable to copy PPD file.";
"Unable to copy Windows 2000 printer driver files (%d)." = "Unable to copy Windows 2000 printer driver files (%d).";
"Unable to copy Windows 9x printer driver files (%d)." = "Unable to copy Windows 9x printer driver files (%d).";
"Unable to create credentials from array." = "Unable to create credentials from array.";
"Unable to create printer-uri" = "Unable to create printer-uri";
"Unable to create printer." = "Unable to create printer.";
"Unable to create server credentials." = "Unable to create server credentials.";
"Unable to create temporary file" = "Unable to create temporary file";
"Unable to delete class" = "Unable to delete class";
"Unable to delete printer" = "Unable to delete printer";
"Unable to do maintenance command" = "Unable to do maintenance command";
"Unable to edit cupsd.conf files larger than 1MB" = "Unable to edit cupsd.conf files larger than 1MB";
"Unable to establish a secure connection to host (certificate chain invalid)." = "Unable to establish a secure connection to host (certificate chain invalid).";
"Unable to establish a secure connection to host (certificate not yet valid)." = "Unable to establish a secure connection to host (certificate not yet valid).";
"Unable to establish a secure connection to host (expired certificate)." = "Unable to establish a secure connection to host (expired certificate).";
"Unable to establish a secure connection to host (host name mismatch)." = "Unable to establish a secure connection to host (host name mismatch).";
"Unable to establish a secure connection to host (peer dropped connection before responding)." = "Unable to establish a secure connection to host (peer dropped connection before responding).";
"Unable to establish a secure connection to host (self-signed certificate)." = "Unable to establish a secure connection to host (self-signed certificate).";
"Unable to establish a secure connection to host (untrusted certificate)." = "Unable to establish a secure connection to host (untrusted certificate).";
"Unable to establish a secure connection to host." = "Unable to establish a secure connection to host.";
"Unable to find destination for job" = "Unable to find destination for job";
"Unable to find printer." = "Unable to find printer.";
"Unable to find server credentials." = "Unable to find server credentials.";
"Unable to get backend exit status." = "Unable to get backend exit status.";
"Unable to get class list" = "Unable to get class list";
"Unable to get class status" = "Unable to get class status";
"Unable to get list of printer drivers" = "Unable to get list of printer drivers";
"Unable to get printer attributes" = "Unable to get printer attributes";
"Unable to get printer list" = "Unable to get printer list";
"Unable to get printer status" = "Unable to get printer status";
"Unable to get printer status." = "Unable to get printer status.";
"Unable to install Windows 2000 printer driver files (%d)." = "Unable to install Windows 2000 printer driver files (%d).";
"Unable to install Windows 9x printer driver files (%d)." = "Unable to install Windows 9x printer driver files (%d).";
"Unable to load help index." = "Unable to load help index.";
"Unable to locate printer \"%s\"." = "Unable to locate printer “%s”.";
"Unable to locate printer." = "Unable to locate printer.";
"Unable to modify class" = "Unable to modify class";
"Unable to modify printer" = "Unable to modify printer";
"Unable to move job" = "Unable to move job";
"Unable to move jobs" = "Unable to move jobs";
"Unable to open PPD file" = "Unable to open PPD file";
"Unable to open cupsd.conf file:" = "Unable to open cupsd.conf file:";
"Unable to open device file" = "Unable to open device file";
"Unable to open document #%d in job #%d." = "Unable to open document #%d in job #%d.";
"Unable to open help file." = "Unable to open help file.";
"Unable to open print file" = "Unable to open print file";
"Unable to open raster file" = "Unable to open raster file";
"Unable to print test page" = "Unable to print test page";
"Unable to read print data." = "Unable to read print data.";
"Unable to rename job document file." = "Unable to rename job document file.";
"Unable to resolve printer-uri." = "Unable to resolve printer-uri.";
"Unable to run \"%s\": %s" = "Unable to run “%s”: %s";
"Unable to see in file" = "Unable to see in file";
"Unable to send command to printer driver" = "Unable to send command to printer driver";
"Unable to send data to printer." = "Unable to send data to printer.";
"Unable to set Windows printer driver (%d)." = "Unable to set Windows printer driver (%d).";
"Unable to set options" = "Unable to set options";
"Unable to set server default" = "Unable to set server default";
"Unable to start backend process." = "Unable to start backend process.";
"Unable to upload cupsd.conf file" = "Unable to upload cupsd.conf file";
"Unable to use legacy USB class driver." = "Unable to use legacy USB class driver.";
"Unable to write print data" = "Unable to write print data";
"Unable to write uncompressed print data: %s" = "Unable to write uncompressed print data: %s";
"Unauthorized" = "Unauthorized";
"Units" = "Units";
"Unknown" = "Unknown";
"Unknown choice \"%s\" for option \"%s\"." = "Unknown choice “%s” for option “%s”.";
"Unknown encryption option value: \"%s\"." = "Unknown encryption option value: “%s”.";
"Unknown file order: \"%s\"." = "Unknown file order: “%s”.";
"Unknown format character: \"%c\"." = "Unknown format character: “%c”.";
"Unknown hash algorithm." = "Unknown hash algorithm.";
"Unknown media size name." = "Unknown media size name.";
"Unknown option \"%s\" with value \"%s\"." = "Unknown option “%s” with value “%s”.";
"Unknown option \"%s\"." = "Unknown option “%s”.";
"Unknown print mode: \"%s\"." = "Unknown print mode: “%s”.";
"Unknown printer-error-policy \"%s\"." = "Unknown printer-error-policy “%s”.";
"Unknown printer-op-policy \"%s\"." = "Unknown printer-op-policy “%s”.";
"Unknown request method." = "Unknown request method.";
"Unknown request version." = "Unknown request version.";
"Unknown scheme in URI" = "Unknown scheme in URI";
"Unknown service name." = "Unknown service name.";
"Unknown version option value: \"%s\"." = "Unknown version option value: “%s”.";
"Unsupported 'compression' value \"%s\"." = "Unsupported ‘compression’ value “%s”.";
"Unsupported 'document-format' value \"%s\"." = "Unsupported ‘document-format’ value “%s”.";
"Unsupported 'job-name' value." = "Unsupported ‘job-name’ value.";
"Unsupported character set \"%s\"." = "Unsupported character set “%s”.";
"Unsupported compression \"%s\"." = "Unsupported compression “%s”.";
"Unsupported document-format \"%s\"." = "Unsupported document-format “%s”.";
"Unsupported document-format \"%s/%s\"." = "Unsupported document-format “%s/%s”.";
"Unsupported format \"%s\"." = "Unsupported format “%s”.";
"Unsupported margins." = "Unsupported margins.";
"Unsupported media value." = "Unsupported media value.";
"Unsupported number-up value %d, using number-up=1." = "Unsupported number-up value %d, using number-up=1.";
"Unsupported number-up-layout value %s, using number-up-layout=lrtb." = "Unsupported number-up-layout value %s, using number-up-layout=lrtb.";
"Unsupported page-border value %s, using page-border=none." = "Unsupported page-border value %s, using page-border=none.";
"Unsupported raster data." = "Unsupported raster data.";
"Unsupported value type" = "Unsupported value type";
"Upgrade Required" = "Upgrade Required";
"Usage:\n\n    lpadmin [-h server] -d destination\n    lpadmin [-h server] -x destination\n    lpadmin [-h server] -p printer [-c add-class] [-i interface] [-m model]\n                       [-r remove-class] [-v device] [-D description]\n                       [-P ppd-file] [-o name=value]\n                       [-u allow:user,user] [-u deny:user,user]" = "Usage:\n\n    lpadmin [-h server] -d destination\n    lpadmin [-h server] -x destination\n    lpadmin [-h server] -p printer [-c add-class] [-i interface] [-m model]\n                       [-r remove-class] [-v device] [-D description]\n                       [-P ppd-file] [-o name=value]\n                       [-u allow:user,user] [-u deny:user,user]";
"Usage: %s job-id user title copies options [file]" = "Usage: %s job-id user title copies options [file]";
"Usage: cupsaddsmb [options] printer1 ... printerN" = "Usage: cupsaddsmb [options] printer1 … printerN";
"Usage: cupsctl [options] [param=value ... paramN=valueN]" = "Usage: cupsctl [options] [param=value … paramN=valueN]";
"Usage: cupsd [options]" = "Usage: cupsd [options]";
"Usage: cupsfilter [ options ] [ -- ] filename" = "Usage: cupsfilter [ options ] [ -- ] filename";
"Usage: cupstestdsc [options] filename.ps [... filename.ps]" = "Usage: cupstestdsc [options] filename.ps [… filename.ps]";
"Usage: cupstestppd [options] filename1.ppd[.gz] [... filenameN.ppd[.gz]]" = "Usage: cupstestppd [options] filename1.ppd[.gz] [… filenameN.ppd[.gz]]";
"Usage: ippfind [options] regtype[,subtype][.domain.] ... [expression]\n       ippfind [options] name[.regtype[.domain.]] ... [expression]\n       ippfind --help\n       ippfind --version" = "Usage: ippfind [options] regtype[,subtype][.domain.] … [expression]\n       ippfind [options] name[.regtype[.domain.]] … [expression]\n       ippfind --help\n       ippfind --version";
"Usage: ipptool [options] URI filename [ ... filenameN ]" = "Usage: ipptool [options] URI filename [ … filenameN ]";
"Usage: lpmove job/src dest" = "Usage: lpmove job/src dest";
"Usage: lpoptions [-h server] [-E] -d printer\n       lpoptions [-h server] [-E] [-p printer] -l\n       lpoptions [-h server] [-E] -p printer -o option[=value] ...\n       lpoptions [-h server] [-E] -x printer" = "Usage: lpoptions [-h server] [-E] -d printer\n       lpoptions [-h server] [-E] [-p printer] -l\n       lpoptions [-h server] [-E] -p printer -o option[=value] …\n       lpoptions [-h server] [-E] -x printer";
"Usage: lpq [-P dest] [-U username] [-h hostname[:port]] [-l] [+interval]" = "Usage: lpq [-P dest] [-U username] [-h hostname[:port]] [-l] [+interval]";
"Usage: ppdc [options] filename.drv [ ... filenameN.drv ]" = "Usage: ppdc [options] filename.drv [ … filenameN.drv ]";
"Usage: ppdhtml [options] filename.drv >filename.html" = "Usage: ppdhtml [options] filename.drv >filename.html";
"Usage: ppdi [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdi [options] filename.ppd [ … filenameN.ppd ]";
"Usage: ppdmerge [options] filename.ppd [ ... filenameN.ppd ]" = "Usage: ppdmerge [options] filename.ppd [ … filenameN.ppd ]";
"Usage: ppdpo [options] -o filename.po filename.drv [ ... filenameN.drv ]" = "Usage: ppdpo [options] -o filename.po filename.drv [ … filenameN.drv ]";
"Usage: snmp [host-or-ip-address]" = "Usage: snmp [host-or-ip-address]";
"Value uses indefinite length" = "Value uses indefinite length";
"VarBind uses indefinite length" = "VarBind uses indefinite length";
"Vellum Paper" = "Vellum Paper";
"Version uses indefinite length" = "Version uses indefinite length";
"Waiting for job to complete." = "Waiting for job to complete.";
"Waiting for printer to become available." = "Waiting for printer to become available.";
"Waiting for printer to finish." = "Waiting for printer to finish.";
"Warning, no Windows 2000 printer drivers are installed." = "Warning, no Windows 2000 printer drivers are installed.";
"Waterproof Fabric" = "Waterproof Fabric";
"Web Interface is Disabled" = "Web Interface is Disabled";
"Wet Film" = "Wet Film";
"Windowed Envelope" = "Windowed Envelope";
"Yes" = "Yes";
"You must access this page using the URL <A HREF=\"https://%s:%d%s\">https://%s:%d%s</A>." = "You must access this page using the URL <A HREF=\"https://%s:%d%s\">https://%s:%d%s</A>.";
"Z Fold" = "Z Fold";
"ZPL Label Printer" = "ZPL Label Printer";
"Zebra" = "Zebra";
"aborted" = "aborted";
"canceled" = "canceled";
"completed" = "completed";
"cups-deviced failed to execute." = "cups-deviced failed to execute.";
"cups-driverd failed to execute." = "cups-driverd failed to execute.";
"cupsaddsmb: No PPD file for printer \"%s\" - %s" = "cupsaddsmb: No PPD file for printer “%s” - %s";
"cupsctl: Cannot set Listen or Port directly." = "cupsctl: Cannot set Listen or Port directly.";
"cupsctl: Unable to connect to server: %s" = "cupsctl: Unable to connect to server: %s";
"cupsctl: Unknown option \"%s\"" = "cupsctl: Unknown option “%s”";
"cupsctl: Unknown option \"-%c\"" = "cupsctl: Unknown option “-%c”";
"cupsd: Expected config filename after \"-c\" option." = "cupsd: Expected config filename after “-c” option.";
"cupsd: Expected cups-files.conf filename after \"-s\" option." = "cupsd: Expected cups-files.conf filename after “-s” option.";
"cupsd: On-demand support not compiled in, running in normal mode." = "cupsd: On-demand support not compiled in, running in normal mode.";
"cupsd: Relative cups-files.conf filename not allowed." = "cupsd: Relative cups-files.conf filename not allowed.";
"cupsd: Unable to get current directory." = "cupsd: Unable to get current directory.";
"cupsd: Unable to get path to cups-files.conf file." = "cupsd: Unable to get path to cups-files.conf file.";
"cupsd: Unknown argument \"%s\" - aborting." = "cupsd: Unknown argument “%s” - aborting.";
"cupsd: Unknown option \"%c\" - aborting." = "cupsd: Unknown option “%c” - aborting.";
"cupsfilter: Invalid document number %d." = "cupsfilter: Invalid document number %d.";
"cupsfilter: Invalid job ID %d." = "cupsfilter: Invalid job ID %d.";
"cupsfilter: Only one filename can be specified." = "cupsfilter: Only one filename can be specified.";
"cupsfilter: Unable to get job file - %s" = "cupsfilter: Unable to get job file - %s";
"cupstestppd: The -q option is incompatible with the -v option." = "cupstestppd: The -q option is incompatible with the -v option.";
"cupstestppd: The -v option is incompatible with the -q option." = "cupstestppd: The -v option is incompatible with the -q option.";
"device for %s/%s: %s" = "device for %s/%s: %s";
"device for %s: %s" = "device for %s: %s";
"error-index uses indefinite length" = "error-index uses indefinite length";
"error-status uses indefinite length" = "error-status uses indefinite length";
"held" = "held";
"help\t\tGet help on commands." = "help\t\tGet help on commands.";
"idle" = "idle";
"ippfind: Bad regular expression: %s" = "ippfind: Bad regular expression: %s";
"ippfind: Cannot use --and after --or." = "ippfind: Cannot use --and after --or.";
"ippfind: Expected key name after %s." = "ippfind: Expected key name after %s.";
"ippfind: Expected port range after %s." = "ippfind: Expected port range after %s.";
"ippfind: Expected program after %s." = "ippfind: Expected program after %s.";
"ippfind: Expected semi-colon after %s." = "ippfind: Expected semi-colon after %s.";
"ippfind: Missing close brace in substitution." = "ippfind: Missing close brace in substitution.";
"ippfind: Missing close parenthesis." = "ippfind: Missing close parenthesis.";
"ippfind: Missing expression before \"--and\"." = "ippfind: Missing expression before “--and”.";
"ippfind: Missing expression before \"--or\"." = "ippfind: Missing expression before “--or”.";
"ippfind: Missing key name after %s." = "ippfind: Missing key name after %s.";
"ippfind: Missing open parenthesis." = "ippfind: Missing open parenthesis.";
"ippfind: Missing program after %s." = "ippfind: Missing program after %s.";
"ippfind: Missing regular expression after %s." = "ippfind: Missing regular expression after %s.";
"ippfind: Missing semi-colon after %s." = "ippfind: Missing semi-colon after %s.";
"ippfind: Out of memory." = "ippfind: Out of memory.";
"ippfind: Too many parenthesis." = "ippfind: Too many parenthesis.";
"ippfind: Unable to browse or resolve: %s" = "ippfind: Unable to browse or resolve: %s";
"ippfind: Unable to execute \"%s\": %s" = "ippfind: Unable to execute “%s”: %s";
"ippfind: Unable to use Bonjour: %s" = "ippfind: Unable to use Bonjour: %s";
"ippfind: Unknown variable \"{%s}\"." = "ippfind: Unknown variable “{%s}”.";
"ipptool: \"-i\" and \"-n\" are incompatible with \"-P\" and \"-X\"." = "ipptool: “-i” and “-n” are incompatible with “-P” and “-X”.";
"ipptool: Bad URI - %s." = "ipptool: Bad URI - %s.";
"ipptool: Invalid seconds for \"-i\"." = "ipptool: Invalid seconds for “-i”.";
"ipptool: May only specify a single URI." = "ipptool: May only specify a single URI.";
"ipptool: Missing count for \"-n\"." = "ipptool: Missing count for “-n”.";
"ipptool: Missing filename for \"-f\"." = "ipptool: Missing filename for “-f”.";
"ipptool: Missing name=value for \"-d\"." = "ipptool: Missing name=value for “-d”.";
"ipptool: Missing seconds for \"-i\"." = "ipptool: Missing seconds for “-i”.";
"ipptool: URI required before test file." = "ipptool: URI required before test file.";
"ipptool: Unknown option \"-%c\"." = "ipptool: Unknown option “-%c”.";
"job-printer-uri attribute missing." = "job-printer-uri attribute missing.";
"lpadmin: Class name can only contain printable characters." = "lpadmin: Class name can only contain printable characters.";
"lpadmin: Expected PPD after \"-%c\" option." = "lpadmin: Expected PPD after “-%c” option.";
"lpadmin: Expected allow/deny:userlist after \"-u\" option." = "lpadmin: Expected allow/deny:userlist after “-u” option.";
"lpadmin: Expected class after \"-r\" option." = "lpadmin: Expected class after “-r” option.";
"lpadmin: Expected class name after \"-c\" option." = "lpadmin: Expected class name after “-c” option.";
"lpadmin: Expected description after \"-D\" option." = "lpadmin: Expected description after “-D” option.";
"lpadmin: Expected device URI after \"-v\" option." = "lpadmin: Expected device URI after “-v” option.";
"lpadmin: Expected file type(s) after \"-I\" option." = "lpadmin: Expected file type(s) after “-I” option.";
"lpadmin: Expected hostname after \"-h\" option." = "lpadmin: Expected hostname after “-h” option.";
"lpadmin: Expected location after \"-L\" option." = "lpadmin: Expected location after “-L” option.";
"lpadmin: Expected model after \"-m\" option." = "lpadmin: Expected model after “-m” option.";
"lpadmin: Expected name after \"-R\" option." = "lpadmin: Expected name after “-R” option.";
"lpadmin: Expected name=value after \"-o\" option." = "lpadmin: Expected name=value after “-o” option.";
"lpadmin: Expected printer after \"-p\" option." = "lpadmin: Expected printer after “-p” option.";
"lpadmin: Expected printer name after \"-d\" option." = "lpadmin: Expected printer name after “-d” option.";
"lpadmin: Expected printer or class after \"-x\" option." = "lpadmin: Expected printer or class after “-x” option.";
"lpadmin: No member names were seen." = "lpadmin: No member names were seen.";
"lpadmin: Printer %s is already a member of class %s." = "lpadmin: Printer %s is already a member of class %s.";
"lpadmin: Printer %s is not a member of class %s." = "lpadmin: Printer %s is not a member of class %s.";
"lpadmin: Printer name can only contain printable characters." = "lpadmin: Printer name can only contain printable characters.";
"lpadmin: Unable to add a printer to the class:\n         You must specify a printer name first." = "lpadmin: Unable to add a printer to the class:\n         You must specify a printer name first.";
"lpadmin: Unable to connect to server: %s" = "lpadmin: Unable to connect to server: %s";
"lpadmin: Unable to create temporary file" = "lpadmin: Unable to create temporary file";
"lpadmin: Unable to delete option:\n         You must specify a printer name first." = "lpadmin: Unable to delete option:\n         You must specify a printer name first.";
"lpadmin: Unable to open PPD \"%s\": %s on line %d." = "lpadmin: Unable to open PPD “%s”: %s on line %d.";
"lpadmin: Unable to open PPD file \"%s\" - %s" = "lpadmin: Unable to open PPD file “%s” - %s";
"lpadmin: Unable to remove a printer from the class:\n         You must specify a printer name first." = "lpadmin: Unable to remove a printer from the class:\n         You must specify a printer name first.";
"lpadmin: Unable to set the printer options:\n         You must specify a printer name first." = "lpadmin: Unable to set the printer options:\n         You must specify a printer name first.";
"lpadmin: Unknown allow/deny option \"%s\"." = "lpadmin: Unknown allow/deny option “%s”.";
"lpadmin: Unknown argument \"%s\"." = "lpadmin: Unknown argument “%s”.";
"lpadmin: Unknown option \"%c\"." = "lpadmin: Unknown option “%c”.";
"lpadmin: Warning - content type list ignored." = "lpadmin: Warning - content type list ignored.";
"lpc> " = "lpc> ";
"lpinfo: Expected 1284 device ID string after \"--device-id\"." = "lpinfo: Expected 1284 device ID string after “--device-id”.";
"lpinfo: Expected language after \"--language\"." = "lpinfo: Expected language after “--language”.";
"lpinfo: Expected make and model after \"--make-and-model\"." = "lpinfo: Expected make and model after “--make-and-model”.";
"lpinfo: Expected product string after \"--product\"." = "lpinfo: Expected product string after “--product”.";
"lpinfo: Expected scheme list after \"--exclude-schemes\"." = "lpinfo: Expected scheme list after “--exclude-schemes”.";
"lpinfo: Expected scheme list after \"--include-schemes\"." = "lpinfo: Expected scheme list after “--include-schemes”.";
"lpinfo: Expected timeout after \"--timeout\"." = "lpinfo: Expected timeout after “--timeout”.";
"lpmove: Unable to connect to server: %s" = "lpmove: Unable to connect to server: %s";
"lpmove: Unknown argument \"%s\"." = "lpmove: Unknown argument “%s”.";
"lpoptions: No printers." = "lpoptions: No printers.";
"lpoptions: Unable to add printer or instance: %s" = "lpoptions: Unable to add printer or instance: %s";
"lpoptions: Unable to get PPD file for %s: %s" = "lpoptions: Unable to get PPD file for %s: %s";
"lpoptions: Unable to open PPD file for %s." = "lpoptions: Unable to open PPD file for %s.";
"lpoptions: Unknown printer or class." = "lpoptions: Unknown printer or class.";
"lpstat: error - %s environment variable names non-existent destination \"%s\"." = "lpstat: error - %s environment variable names non-existent destination “%s”.";
"members of class %s:" = "members of class %s:";
"no entries" = "no entries";
"no system default destination" = "no system default destination";
"notify-events not specified." = "notify-events not specified.";
"notify-recipient-uri URI \"%s\" is already used." = "notify-recipient-uri URI “%s” is already used.";
"notify-recipient-uri URI \"%s\" uses unknown scheme." = "notify-recipient-uri URI “%s” uses unknown scheme.";
"pending" = "pending";
"ppdc: Adding include directory \"%s\"." = "ppdc: Adding include directory “%s”.";
"ppdc: Adding/updating UI text from %s." = "ppdc: Adding/updating UI text from %s.";
"ppdc: Bad boolean value (%s) on line %d of %s." = "ppdc: Bad boolean value (%s) on line %d of %s.";
"ppdc: Bad font attribute: %s" = "ppdc: Bad font attribute: %s";
"ppdc: Bad resolution name \"%s\" on line %d of %s." = "ppdc: Bad resolution name “%s” on line %d of %s.";
"ppdc: Bad status keyword %s on line %d of %s." = "ppdc: Bad status keyword %s on line %d of %s.";
"ppdc: Bad variable substitution ($%c) on line %d of %s." = "ppdc: Bad variable substitution ($%c) on line %d of %s.";
"ppdc: Choice found on line %d of %s with no Option." = "ppdc: Choice found on line %d of %s with no Option.";
"ppdc: Duplicate #po for locale %s on line %d of %s." = "ppdc: Duplicate #po for locale %s on line %d of %s.";
"ppdc: Expected a filter definition on line %d of %s." = "ppdc: Expected a filter definition on line %d of %s.";
"ppdc: Expected a program name on line %d of %s." = "ppdc: Expected a program name on line %d of %s.";
"ppdc: Expected boolean value on line %d of %s." = "ppdc: Expected boolean value on line %d of %s.";
"ppdc: Expected charset after Font on line %d of %s." = "ppdc: Expected charset after Font on line %d of %s.";
"ppdc: Expected choice code on line %d of %s." = "ppdc: Expected choice code on line %d of %s.";
"ppdc: Expected choice name/text on line %d of %s." = "ppdc: Expected choice name/text on line %d of %s.";
"ppdc: Expected color order for ColorModel on line %d of %s." = "ppdc: Expected color order for ColorModel on line %d of %s.";
"ppdc: Expected colorspace for ColorModel on line %d of %s." = "ppdc: Expected colorspace for ColorModel on line %d of %s.";
"ppdc: Expected compression for ColorModel on line %d of %s." = "ppdc: Expected compression for ColorModel on line %d of %s.";
"ppdc: Expected constraints string for UIConstraints on line %d of %s." = "ppdc: Expected constraints string for UIConstraints on line %d of %s.";
"ppdc: Expected driver type keyword following DriverType on line %d of %s." = "ppdc: Expected driver type keyword following DriverType on line %d of %s.";
"ppdc: Expected duplex type after Duplex on line %d of %s." = "ppdc: Expected duplex type after Duplex on line %d of %s.";
"ppdc: Expected encoding after Font on line %d of %s." = "ppdc: Expected encoding after Font on line %d of %s.";
"ppdc: Expected filename after #po %s on line %d of %s." = "ppdc: Expected filename after #po %s on line %d of %s.";
"ppdc: Expected group name/text on line %d of %s." = "ppdc: Expected group name/text on line %d of %s.";
"ppdc: Expected include filename on line %d of %s." = "ppdc: Expected include filename on line %d of %s.";
"ppdc: Expected integer on line %d of %s." = "ppdc: Expected integer on line %d of %s.";
"ppdc: Expected locale after #po on line %d of %s." = "ppdc: Expected locale after #po on line %d of %s.";
"ppdc: Expected name after %s on line %d of %s." = "ppdc: Expected name after %s on line %d of %s.";
"ppdc: Expected name after FileName on line %d of %s." = "ppdc: Expected name after FileName on line %d of %s.";
"ppdc: Expected name after Font on line %d of %s." = "ppdc: Expected name after Font on line %d of %s.";
"ppdc: Expected name after Manufacturer on line %d of %s." = "ppdc: Expected name after Manufacturer on line %d of %s.";
"ppdc: Expected name after MediaSize on line %d of %s." = "ppdc: Expected name after MediaSize on line %d of %s.";
"ppdc: Expected name after ModelName on line %d of %s." = "ppdc: Expected name after ModelName on line %d of %s.";
"ppdc: Expected name after PCFileName on line %d of %s." = "ppdc: Expected name after PCFileName on line %d of %s.";
"ppdc: Expected name/text after %s on line %d of %s." = "ppdc: Expected name/text after %s on line %d of %s.";
"ppdc: Expected name/text after Installable on line %d of %s." = "ppdc: Expected name/text after Installable on line %d of %s.";
"ppdc: Expected name/text after Resolution on line %d of %s." = "ppdc: Expected name/text after Resolution on line %d of %s.";
"ppdc: Expected name/text combination for ColorModel on line %d of %s." = "ppdc: Expected name/text combination for ColorModel on line %d of %s.";
"ppdc: Expected option name/text on line %d of %s." = "ppdc: Expected option name/text on line %d of %s.";
"ppdc: Expected option section on line %d of %s." = "ppdc: Expected option section on line %d of %s.";
"ppdc: Expected option type on line %d of %s." = "ppdc: Expected option type on line %d of %s.";
"ppdc: Expected override field after Resolution on line %d of %s." = "ppdc: Expected override field after Resolution on line %d of %s.";
"ppdc: Expected quoted string on line %d of %s." = "ppdc: Expected quoted string on line %d of %s.";
"ppdc: Expected real number on line %d of %s." = "ppdc: Expected real number on line %d of %s.";
"ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following ColorProfile on line %d of %s.";
"ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s." = "ppdc: Expected resolution/mediatype following SimpleColorProfile on line %d of %s.";
"ppdc: Expected selector after %s on line %d of %s." = "ppdc: Expected selector after %s on line %d of %s.";
"ppdc: Expected status after Font on line %d of %s." = "ppdc: Expected status after Font on line %d of %s.";
"ppdc: Expected string after Copyright on line %d of %s." = "ppdc: Expected string after Copyright on line %d of %s.";
"ppdc: Expected string after Version on line %d of %s." = "ppdc: Expected string after Version on line %d of %s.";
"ppdc: Expected two option names on line %d of %s." = "ppdc: Expected two option names on line %d of %s.";
"ppdc: Expected value after %s on line %d of %s." = "ppdc: Expected value after %s on line %d of %s.";
"ppdc: Expected version after Font on line %d of %s." = "ppdc: Expected version after Font on line %d of %s.";
"ppdc: Invalid #include/#po filename \"%s\"." = "ppdc: Invalid #include/#po filename “%s”.";
"ppdc: Invalid cost for filter on line %d of %s." = "ppdc: Invalid cost for filter on line %d of %s.";
"ppdc: Invalid empty MIME type for filter on line %d of %s." = "ppdc: Invalid empty MIME type for filter on line %d of %s.";
"ppdc: Invalid empty program name for filter on line %d of %s." = "ppdc: Invalid empty program name for filter on line %d of %s.";
"ppdc: Invalid option section \"%s\" on line %d of %s." = "ppdc: Invalid option section “%s” on line %d of %s.";
"ppdc: Invalid option type \"%s\" on line %d of %s." = "ppdc: Invalid option type “%s” on line %d of %s.";
"ppdc: Loading driver information file \"%s\"." = "ppdc: Loading driver information file “%s”.";
"ppdc: Loading messages for locale \"%s\"." = "ppdc: Loading messages for locale “%s”.";
"ppdc: Loading messages from \"%s\"." = "ppdc: Loading messages from “%s”.";
"ppdc: Missing #endif at end of \"%s\"." = "ppdc: Missing #endif at end of “%s”.";
"ppdc: Missing #if on line %d of %s." = "ppdc: Missing #if on line %d of %s.";
"ppdc: Need a msgid line before any translation strings on line %d of %s." = "ppdc: Need a msgid line before any translation strings on line %d of %s.";
"ppdc: No message catalog provided for locale %s." = "ppdc: No message catalog provided for locale %s.";
"ppdc: Option %s defined in two different groups on line %d of %s." = "ppdc: Option %s defined in two different groups on line %d of %s.";
"ppdc: Option %s redefined with a different type on line %d of %s." = "ppdc: Option %s redefined with a different type on line %d of %s.";
"ppdc: Option constraint must *name on line %d of %s." = "ppdc: Option constraint must *name on line %d of %s.";
"ppdc: Too many nested #if's on line %d of %s." = "ppdc: Too many nested #if’s on line %d of %s.";
"ppdc: Unable to create PPD file \"%s\" - %s." = "ppdc: Unable to create PPD file “%s” - %s.";
"ppdc: Unable to create output directory %s: %s" = "ppdc: Unable to create output directory %s: %s";
"ppdc: Unable to create output pipes: %s" = "ppdc: Unable to create output pipes: %s";
"ppdc: Unable to execute cupstestppd: %s" = "ppdc: Unable to execute cupstestppd: %s";
"ppdc: Unable to find #po file %s on line %d of %s." = "ppdc: Unable to find #po file %s on line %d of %s.";
"ppdc: Unable to find include file \"%s\" on line %d of %s." = "ppdc: Unable to find include file “%s” on line %d of %s.";
"ppdc: Unable to find localization for \"%s\" - %s" = "ppdc: Unable to find localization for “%s” - %s";
"ppdc: Unable to load localization file \"%s\" - %s" = "ppdc: Unable to load localization file “%s” - %s";
"ppdc: Unable to open %s: %s" = "ppdc: Unable to open %s: %s";
"ppdc: Undefined variable (%s) on line %d of %s." = "ppdc: Undefined variable (%s) on line %d of %s.";
"ppdc: Unexpected text on line %d of %s." = "ppdc: Unexpected text on line %d of %s.";
"ppdc: Unknown driver type %s on line %d of %s." = "ppdc: Unknown driver type %s on line %d of %s.";
"ppdc: Unknown duplex type \"%s\" on line %d of %s." = "ppdc: Unknown duplex type “%s” on line %d of %s.";
"ppdc: Unknown media size \"%s\" on line %d of %s." = "ppdc: Unknown media size “%s” on line %d of %s.";
"ppdc: Unknown message catalog format for \"%s\"." = "ppdc: Unknown message catalog format for “%s”.";
"ppdc: Unknown token \"%s\" seen on line %d of %s." = "ppdc: Unknown token “%s” seen on line %d of %s.";
"ppdc: Unknown trailing characters in real number \"%s\" on line %d of %s." = "ppdc: Unknown trailing characters in real number “%s” on line %d of %s.";
"ppdc: Unterminated string starting with %c on line %d of %s." = "ppdc: Unterminated string starting with %c on line %d of %s.";
"ppdc: Warning - overlapping filename \"%s\"." = "ppdc: Warning - overlapping filename “%s”.";
"ppdc: Writing %s." = "ppdc: Writing %s.";
"ppdc: Writing PPD files to directory \"%s\"." = "ppdc: Writing PPD files to directory “%s”.";
"ppdmerge: Bad LanguageVersion \"%s\" in %s." = "ppdmerge: Bad LanguageVersion “%s” in %s.";
"ppdmerge: Ignoring PPD file %s." = "ppdmerge: Ignoring PPD file %s.";
"ppdmerge: Unable to backup %s to %s - %s" = "ppdmerge: Unable to backup %s to %s - %s";
"printer %s disabled since %s -" = "printer %s disabled since %s -";
"printer %s is idle.  enabled since %s" = "printer %s is idle.  enabled since %s";
"printer %s now printing %s-%d.  enabled since %s" = "printer %s now printing %s-%d.  enabled since %s";
"printer %s/%s disabled since %s -" = "printer %s/%s disabled since %s -";
"printer %s/%s is idle.  enabled since %s" = "printer %s/%s is idle.  enabled since %s";
"printer %s/%s now printing %s-%d.  enabled since %s" = "printer %s/%s now printing %s-%d.  enabled since %s";
"processing" = "processing";
"request id is %s-%d (%d file(s))" = "request id is %s-%d (%d file(s))";
"request-id uses indefinite length" = "request-id uses indefinite length";
"scheduler is not running" = "scheduler is not running";
"scheduler is running" = "scheduler is running";
"stat of %s failed: %s" = "stat of %s failed: %s";
"status\t\tShow status of daemon and queue." = "status\t\tShow status of daemon and queue.";
"stopped" = "stopped";
"system default destination: %s" = "system default destination: %s";
"system default destination: %s/%s" = "system default destination: %s/%s";
"unknown" = "unknown";
"untitled" = "untitled";
"variable-bindings uses indefinite length" = "variable-bindings uses indefinite length";
"accuracy-units" = "Accuracy Units";
"accuracy-units.mm" = "Millimeters";
"accuracy-units.nm" = "Nanometers";
"accuracy-units.um" = "Micrometers";
"baling" = "Bale Output";
"baling-type" = "Bale Using";
"baling-type.band" = "Band";
"baling-type.shrink-wrap" = "Shrink Wrap";
"baling-type.wrap" = "Wrap";
"baling-when" = "Bale After";
"baling-when.after-job" = "Job";
"baling-when.after-sets" = "Sets";
"binding" = "Bind Output";
"binding-reference-edge" = "Bind Edge";
"binding-reference-edge.bottom" = "Bottom";
"binding-reference-edge.left" = "Left";
"binding-reference-edge.right" = "Right";
"binding-reference-edge.top" = "Top";
"binding-type" = "Binder Type";
"binding-type.adhesive" = "Adhesive";
"binding-type.comb" = "Comb";
"binding-type.flat" = "Flat";
"binding-type.padding" = "Padding";
"binding-type.perfect" = "Perfect";
"binding-type.spiral" = "Spiral";
"binding-type.tape" = "Tape";
"binding-type.velo" = "Velo";
"charge-info-message" = "Print Job Cost";
"coating" = "Coat Sheets";
"coating-sides" = "Add Coating To";
"coating-sides.back" = "Back";
"coating-sides.both" = "Front and Back";
"coating-sides.front" = "Front";
"coating-type" = "Type of Coating";
"coating-type.archival" = "Archival";
"coating-type.archival-glossy" = "Archival Glossy";
"coating-type.archival-matte" = "Archival Matte";
"coating-type.archival-semi-gloss" = "Archival Semi Gloss";
"coating-type.glossy" = "Glossy";
"coating-type.high-gloss" = "High Gloss";
"coating-type.matte" = "Matte";
"coating-type.semi-gloss" = "Semi-gloss";
"coating-type.silicone" = "Silicone";
"coating-type.translucent" = "Translucent";
"confirmation-sheet-print" = "Print Confirmation Sheet";
"copies" = "Copies";
"cover-back" = "Back Cover";
"cover-front" = "Front Cover";
"cover-sheet-info" = "Cover Sheet Info";
"cover-sheet-info-supported.date-time" = "Date Time";
"cover-sheet-info-supported.from-name" = "From Name";
"cover-sheet-info-supported.logo" = "Logo";
"cover-sheet-info-supported.message" = "Message";
"cover-sheet-info-supported.organization" = "Organization";
"cover-sheet-info-supported.subject" = "Subject";
"cover-sheet-info-supported.to-name" = "To Name";
"cover-type" = "Printed Cover";
"cover-type.no-cover" = "No Cover";
"cover-type.print-back" = "Back Only";
"cover-type.print-both" = "Front and Back";
"cover-type.print-front" = "Front Only";
"cover-type.print-none" = "None";
"covering" = "Cover Output";
"covering-name" = "Add Cover";
"covering-name.plain" = "Plain";
"covering-name.pre-cut" = "Pre-cut";
"covering-name.pre-printed" = "Pre-printed";
"detailed-status-message" = "Detailed Status Message";
"document-copies" = "Copies";
"document-state" = "Document State";
"document-state-reasons" = "Detailed Document State";
"document-state-reasons.aborted-by-system" = "Aborted By System";
"document-state-reasons.canceled-at-device" = "Canceled At Device";
"document-state-reasons.canceled-by-operator" = "Canceled By Operator";
"document-state-reasons.canceled-by-user" = "Canceled By User";
"document-state-reasons.completed-successfully" = "Completed Successfully";
"document-state-reasons.completed-with-errors" = "Completed With Errors";
"document-state-reasons.completed-with-warnings" = "Completed With Warnings";
"document-state-reasons.compression-error" = "Compression Error";
"document-state-reasons.data-insufficient" = "Data Insufficient";
"document-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
"document-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
"document-state-reasons.digital-signature-wait" = "Digital Signature Wait";
"document-state-reasons.document-access-error" = "Document Access Error";
"document-state-reasons.document-fetchable" = "Document Fetchable";
"document-state-reasons.document-format-error" = "Document Format Error";
"document-state-reasons.document-password-error" = "Document Password Error";
"document-state-reasons.document-permission-error" = "Document Permission Error";
"document-state-reasons.document-security-error" = "Document Security Error";
"document-state-reasons.document-unprintable-error" = "Document Unprintable Error";
"document-state-reasons.errors-detected" = "Errors Detected";
"document-state-reasons.incoming" = "Incoming";
"document-state-reasons.interpreting" = "Interpreting";
"document-state-reasons.none" = "None";
"document-state-reasons.outgoing" = "Outgoing";
"document-state-reasons.printing" = "Printing";
"document-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
"document-state-reasons.queued" = "Queued";
"document-state-reasons.queued-for-marker" = "Queued For Marker";
"document-state-reasons.queued-in-device" = "Queued In Device";
"document-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
"document-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
"document-state-reasons.submission-interrupted" = "Submission Interrupted";
"document-state-reasons.transforming" = "Transforming";
"document-state-reasons.unsupported-compression" = "Unsupported Compression";
"document-state-reasons.unsupported-document-format" = "Unsupported Document Format";
"document-state-reasons.warnings-detected" = "Warnings Detected";
"document-state.3" = "Pending";
"document-state.5" = "Processing";
"document-state.6" = "Stopped";
"document-state.7" = "Canceled";
"document-state.8" = "Aborted";
"document-state.9" = "Completed";
"feed-orientation" = "Feed Orientation";
"feed-orientation.long-edge-first" = "Long Edge First";
"feed-orientation.short-edge-first" = "Short Edge First";
"fetch-status-code" = "Fetch Status Code";
"finishing-template" = "Finishing Template";
"finishing-template.bale" = "Bale";
"finishing-template.bind" = "Bind";
"finishing-template.bind-bottom" = "Bind Bottom";
"finishing-template.bind-left" = "Bind Left";
"finishing-template.bind-right" = "Bind Right";
"finishing-template.bind-top" = "Bind Top";
"finishing-template.booklet-maker" = "Booklet Maker";
"finishing-template.coat" = "Coat";
"finishing-template.cover" = "Cover";
"finishing-template.edge-stitch" = "Edge Stitch";
"finishing-template.edge-stitch-bottom" = "Edge Stitch Bottom";
"finishing-template.edge-stitch-left" = "Edge Stitch Left";
"finishing-template.edge-stitch-right" = "Edge Stitch Right";
"finishing-template.edge-stitch-top" = "Edge Stitch Top";
"finishing-template.fold" = "Fold";
"finishing-template.fold-accordion" = "Accordion Fold";
"finishing-template.fold-double-gate" = "Double Gate Fold";
"finishing-template.fold-engineering-z" = "Engineering Z Fold";
"finishing-template.fold-gate" = "Gate Fold";
"finishing-template.fold-half" = "Half Fold";
"finishing-template.fold-half-z" = "Half Z Fold";
"finishing-template.fold-left-gate" = "Left Gate Fold";
"finishing-template.fold-letter" = "Letter Fold";
"finishing-template.fold-parallel" = "Parallel Fold";
"finishing-template.fold-poster" = "Poster Fold";
"finishing-template.fold-right-gate" = "Right Gate Fold";
"finishing-template.fold-z" = "Z Fold";
"finishing-template.jdf-f10-1" = "JDF F10-1";
"finishing-template.jdf-f10-2" = "JDF F10-2";
"finishing-template.jdf-f10-3" = "JDF F10-3";
"finishing-template.jdf-f12-1" = "JDF F12-1";
"finishing-template.jdf-f12-10" = "JDF F12-10";
"finishing-template.jdf-f12-11" = "JDF F12-11";
"finishing-template.jdf-f12-12" = "JDF F12-12";
"finishing-template.jdf-f12-13" = "JDF F12-13";
"finishing-template.jdf-f12-14" = "JDF F12-14";
"finishing-template.jdf-f12-2" = "JDF F12-2";
"finishing-template.jdf-f12-3" = "JDF F12-3";
"finishing-template.jdf-f12-4" = "JDF F12-4";
"finishing-template.jdf-f12-5" = "JDF F12-5";
"finishing-template.jdf-f12-6" = "JDF F12-6";
"finishing-template.jdf-f12-7" = "JDF F12-7";
"finishing-template.jdf-f12-8" = "JDF F12-8";
"finishing-template.jdf-f12-9" = "JDF F12-9";
"finishing-template.jdf-f14-1" = "JDF F14-1";
"finishing-template.jdf-f16-1" = "JDF F16-1";
"finishing-template.jdf-f16-10" = "JDF F16-10";
"finishing-template.jdf-f16-11" = "JDF F16-11";
"finishing-template.jdf-f16-12" = "JDF F16-12";
"finishing-template.jdf-f16-13" = "JDF F16-13";
"finishing-template.jdf-f16-14" = "JDF F16-14";
"finishing-template.jdf-f16-2" = "JDF F16-2";
"finishing-template.jdf-f16-3" = "JDF F16-3";
"finishing-template.jdf-f16-4" = "JDF F16-4";
"finishing-template.jdf-f16-5" = "JDF F16-5";
"finishing-template.jdf-f16-6" = "JDF F16-6";
"finishing-template.jdf-f16-7" = "JDF F16-7";
"finishing-template.jdf-f16-8" = "JDF F16-8";
"finishing-template.jdf-f16-9" = "JDF F16-9";
"finishing-template.jdf-f18-1" = "JDF F18-1";
"finishing-template.jdf-f18-2" = "JDF F18-2";
"finishing-template.jdf-f18-3" = "JDF F18-3";
"finishing-template.jdf-f18-4" = "JDF F18-4";
"finishing-template.jdf-f18-5" = "JDF F18-5";
"finishing-template.jdf-f18-6" = "JDF F18-6";
"finishing-template.jdf-f18-7" = "JDF F18-7";
"finishing-template.jdf-f18-8" = "JDF F18-8";
"finishing-template.jdf-f18-9" = "JDF F18-9";
"finishing-template.jdf-f2-1" = "JDF F2-1";
"finishing-template.jdf-f20-1" = "JDF F20-1";
"finishing-template.jdf-f20-2" = "JDF F20-2";
"finishing-template.jdf-f24-1" = "JDF F24-1";
"finishing-template.jdf-f24-10" = "JDF F24-10";
"finishing-template.jdf-f24-11" = "JDF F24-11";
"finishing-template.jdf-f24-2" = "JDF F24-2";
"finishing-template.jdf-f24-3" = "JDF F24-3";
"finishing-template.jdf-f24-4" = "JDF F24-4";
"finishing-template.jdf-f24-5" = "JDF F24-5";
"finishing-template.jdf-f24-6" = "JDF F24-6";
"finishing-template.jdf-f24-7" = "JDF F24-7";
"finishing-template.jdf-f24-8" = "JDF F24-8";
"finishing-template.jdf-f24-9" = "JDF F24-9";
"finishing-template.jdf-f28-1" = "JDF F28-1";
"finishing-template.jdf-f32-1" = "JDF F32-1";
"finishing-template.jdf-f32-2" = "JDF F32-2";
"finishing-template.jdf-f32-3" = "JDF F32-3";
"finishing-template.jdf-f32-4" = "JDF F32-4";
"finishing-template.jdf-f32-5" = "JDF F32-5";
"finishing-template.jdf-f32-6" = "JDF F32-6";
"finishing-template.jdf-f32-7" = "JDF F32-7";
"finishing-template.jdf-f32-8" = "JDF F32-8";
"finishing-template.jdf-f32-9" = "JDF F32-9";
"finishing-template.jdf-f36-1" = "JDF F36-1";
"finishing-template.jdf-f36-2" = "JDF F36-2";
"finishing-template.jdf-f4-1" = "JDF F4-1";
"finishing-template.jdf-f4-2" = "JDF F4-2";
"finishing-template.jdf-f40-1" = "JDF F40-1";
"finishing-template.jdf-f48-1" = "JDF F48-1";
"finishing-template.jdf-f48-2" = "JDF F48-2";
"finishing-template.jdf-f6-1" = "JDF F6-1";
"finishing-template.jdf-f6-2" = "JDF F6-2";
"finishing-template.jdf-f6-3" = "JDF F6-3";
"finishing-template.jdf-f6-4" = "JDF F6-4";
"finishing-template.jdf-f6-5" = "JDF F6-5";
"finishing-template.jdf-f6-6" = "JDF F6-6";
"finishing-template.jdf-f6-7" = "JDF F6-7";
"finishing-template.jdf-f6-8" = "JDF F6-8";
"finishing-template.jdf-f64-1" = "JDF F64-1";
"finishing-template.jdf-f64-2" = "JDF F64-2";
"finishing-template.jdf-f8-1" = "JDF F8-1";
"finishing-template.jdf-f8-2" = "JDF F8-2";
"finishing-template.jdf-f8-3" = "JDF F8-3";
"finishing-template.jdf-f8-4" = "JDF F8-4";
"finishing-template.jdf-f8-5" = "JDF F8-5";
"finishing-template.jdf-f8-6" = "JDF F8-6";
"finishing-template.jdf-f8-7" = "JDF F8-7";
"finishing-template.jog-offset" = "Jog Offset";
"finishing-template.laminate" = "Laminate";
"finishing-template.punch" = "Punch";
"finishing-template.punch-bottom-left" = "Punch Bottom Left";
"finishing-template.punch-bottom-right" = "Punch Bottom Right";
"finishing-template.punch-dual-bottom" = "2-hole Punch Bottom";
"finishing-template.punch-dual-left" = "2-hole Punch Left";
"finishing-template.punch-dual-right" = "2-hole Punch Right";
"finishing-template.punch-dual-top" = "2-hole Punch Top";
"finishing-template.punch-multiple-bottom" = "Multi-hole Punch Bottom";
"finishing-template.punch-multiple-left" = "Multi-hole Punch Left";
"finishing-template.punch-multiple-right" = "Multi-hole Punch Right";
"finishing-template.punch-multiple-top" = "Multi-hole Punch Top";
"finishing-template.punch-quad-bottom" = "4-hole Punch Bottom";
"finishing-template.punch-quad-left" = "4-hole Punch Left";
"finishing-template.punch-quad-right" = "4-hole Punch Right";
"finishing-template.punch-quad-top" = "4-hole Punch Top";
"finishing-template.punch-top-left" = "Punch Top Left";
"finishing-template.punch-top-right" = "Punch Top Right";
"finishing-template.punch-triple-bottom" = "3-hole Punch Bottom";
"finishing-template.punch-triple-left" = "3-hole Punch Left";
"finishing-template.punch-triple-right" = "3-hole Punch Right";
"finishing-template.punch-triple-top" = "3-hole Punch Top";
"finishing-template.saddle-stitch" = "Saddle Stitch";
"finishing-template.staple" = "Staple";
"finishing-template.staple-bottom-left" = "Staple Bottom Left";
"finishing-template.staple-bottom-right" = "Staple Bottom Right";
"finishing-template.staple-dual-bottom" = "2 Staples on Bottom";
"finishing-template.staple-dual-left" = "2 Staples on Left";
"finishing-template.staple-dual-right" = "2 Staples on Right";
"finishing-template.staple-dual-top" = "2 Staples on Top";
"finishing-template.staple-top-left" = "Staple Top Left";
"finishing-template.staple-top-right" = "Staple Top Right";
"finishing-template.staple-triple-bottom" = "3 Staples on Bottom";
"finishing-template.staple-triple-left" = "3 Staples on Left";
"finishing-template.staple-triple-right" = "3 Staples on Right";
"finishing-template.staple-triple-top" = "3 Staples on Top";
"finishing-template.trim" = "Trim";
"finishing-template.trim-after-copies" = "Trim After Every Set";
"finishing-template.trim-after-documents" = "Trim After Every Document";
"finishing-template.trim-after-job" = "Trim After Job";
"finishing-template.trim-after-pages" = "Trim After Every Page";
"finishings" = "Finishings";
"finishings-col" = "Finishings";
"finishings.10" = "Fold";
"finishings.100" = "Z Fold";
"finishings.101" = "Engineering Z Fold";
"finishings.11" = "Trim";
"finishings.12" = "Bale";
"finishings.13" = "Booklet Maker";
"finishings.14" = "Jog Offset";
"finishings.15" = "Coat";
"finishings.16" = "Laminate";
"finishings.20" = "Staple Top Left";
"finishings.21" = "Staple Bottom Left";
"finishings.22" = "Staple Top Right";
"finishings.23" = "Staple Bottom Right";
"finishings.24" = "Edge Stitch Left";
"finishings.25" = "Edge Stitch Top";
"finishings.26" = "Edge Stitch Right";
"finishings.27" = "Edge Stitch Bottom";
"finishings.28" = "2 Staples on Left";
"finishings.29" = "2 Staples on Top";
"finishings.3" = "None";
"finishings.30" = "2 Staples on Right";
"finishings.31" = "2 Staples on Bottom";
"finishings.32" = "3 Staples on Left";
"finishings.33" = "3 Staples on Top";
"finishings.34" = "3 Staples on Right";
"finishings.35" = "3 Staples on Bottom";
"finishings.4" = "Staple";
"finishings.5" = "Punch";
"finishings.50" = "Bind Left";
"finishings.51" = "Bind Top";
"finishings.52" = "Bind Right";
"finishings.53" = "Bind Bottom";
"finishings.6" = "Cover";
"finishings.60" = "Trim Pages";
"finishings.61" = "Trim Documents";
"finishings.62" = "Trim Copies";
"finishings.63" = "Trim Job";
"finishings.7" = "Bind";
"finishings.70" = "Punch Top Left";
"finishings.71" = "Punch Bottom Left";
"finishings.72" = "Punch Top Right";
"finishings.73" = "Punch Bottom Right";
"finishings.74" = "2-hole Punch Left";
"finishings.75" = "2-hole Punch Top";
"finishings.76" = "2-hole Punch Right";
"finishings.77" = "2-hole Punch Bottom";
"finishings.78" = "3-hole Punch Left";
"finishings.79" = "3-hole Punch Top";
"finishings.8" = "Saddle Stitch";
"finishings.80" = "3-hole Punch Right";
"finishings.81" = "3-hole Punch Bottom";
"finishings.82" = "4-hole Punch Left";
"finishings.83" = "4-hole Punch Top";
"finishings.84" = "4-hole Punch Right";
"finishings.85" = "4-hole Punch Bottom";
"finishings.86" = "Multi-hole Punch Left";
"finishings.87" = "Multi-hole Punch Top";
"finishings.88" = "Multi-hole Punch Right";
"finishings.89" = "Multi-hole Punch Bottom";
"finishings.9" = "Edge Stitch";
"finishings.90" = "Accordion Fold";
"finishings.91" = "Double Gate Fold";
"finishings.92" = "Gate Fold";
"finishings.93" = "Half Fold";
"finishings.94" = "Half Z Fold";
"finishings.95" = "Left Gate Fold";
"finishings.96" = "Letter Fold";
"finishings.97" = "Parallel Fold";
"finishings.98" = "Poster Fold";
"finishings.99" = "Right Gate Fold";
"folding" = "Fold";
"folding-direction" = "Fold Direction";
"folding-direction.inward" = "Inward";
"folding-direction.outward" = "Outward";
"folding-offset" = "Fold Position";
"folding-reference-edge" = "Fold Edge";
"folding-reference-edge.bottom" = "Bottom";
"folding-reference-edge.left" = "Left";
"folding-reference-edge.right" = "Right";
"folding-reference-edge.top" = "Top";
"font-name-requested" = "Font Name";
"font-size-requested" = "Font Size";
"force-front-side" = "Force Front Side";
"from-name" = "From Name";
"imposition-template" = "Imposition Template";
"imposition-template.none" = "None";
"imposition-template.signature" = "Signature";
"input-attributes" = "Scanner Options";
"input-auto-scaling" = "Scan Auto Scaling";
"input-auto-skew-correction" = "Scan Auto Skew Correction";
"input-brightness" = "Scan Brightness";
"input-color-mode" = "Scanning Mode";
"input-color-mode.auto" = "Automatic";
"input-color-mode.bi-level" = "Text";
"input-color-mode.cmyk_16" = "16-bit CMYK";
"input-color-mode.cmyk_8" = "8-bit CMYK";
"input-color-mode.color" = "Color";
"input-color-mode.color_8" = "8-bit Color";
"input-color-mode.monochrome" = "Monochrome";
"input-color-mode.monochrome_16" = "16-bit Monochrome";
"input-color-mode.monochrome_4" = "4-bit Monochrome";
"input-color-mode.monochrome_8" = "8-bit Monochrome";
"input-color-mode.rgb_16" = "16-bit RGB";
"input-color-mode.rgba_16" = "16-bit RGBA";
"input-color-mode.rgba_8" = "8-bit RGBA";
"input-content-type" = "Scan Content";
"input-content-type.auto" = "Automatic";
"input-content-type.halftone" = "Halftone";
"input-content-type.line-art" = "Line Art";
"input-content-type.magazine" = "Magazine";
"input-content-type.photo" = "Photo";
"input-content-type.text" = "Text";
"input-content-type.text-and-photo" = "Text And Photo";
"input-contrast" = "Scan Contrast";
"input-film-scan-mode" = "Film Type";
"input-film-scan-mode.black-and-white-negative-film" = "Black And White Negative Film";
"input-film-scan-mode.color-negative-film" = "Color Negative Film";
"input-film-scan-mode.color-slide-film" = "Color Slide Film";
"input-film-scan-mode.not-applicable" = "Not Applicable";
"input-images-to-transfer" = "Scan Images To Transfer";
"input-media" = "Scan Media";
"input-media.auto" = "Automatic";
"input-orientation-requested" = "Scan Orientation";
"input-quality" = "Scan Quality";
"input-resolution" = "Scan Resolution";
"input-scaling-height" = "Scan Scaling Height";
"input-scaling-width" = "Scan Scaling Width";
"input-scan-regions" = "Scan Regions";
"input-sharpness" = "Scan Sharpness";
"input-sides" = "2-Sided Scanning";
"input-source" = "Scan Source";
"input-source.adf" = "Automatic Document Feeder";
"input-source.film-reader" = "Film Reader";
"input-source.platen" = "Platen";
"insert-after-page-number" = "Insert Page Number";
"insert-count" = "Insert Count";
"insert-sheet" = "Insert Sheet";
"job-account-id" = "Job Account ID";
"job-account-type" = "Job Account Type";
"job-account-type.general" = "General";
"job-account-type.group" = "Group";
"job-account-type.none" = "None";
"job-accounting-output-bin" = "Job Accounting Output Bin";
"job-accounting-sheets" = "Job Accounting Sheets";
"job-accounting-sheets-type" = "Type of Job Accounting Sheets";
"job-accounting-sheets-type.none" = "None";
"job-accounting-sheets-type.standard" = "Standard";
"job-accounting-user-id" = "Job Accounting User ID";
"job-collation-type" = "Collate Copies";
"job-collation-type.3" = "Uncollated Sheets";
"job-collation-type.4" = "Collated Documents";
"job-collation-type.5" = "Uncollated Documents";
"job-copies" = "Copies";
"job-cover-back" = "Back Cover";
"job-cover-front" = "Front Cover";
"job-delay-output-until" = "Delay Output Until";
"job-delay-output-until-time" = "Delay Output Until";
"job-delay-output-until.day-time" = "Daytime";
"job-delay-output-until.evening" = "Evening";
"job-delay-output-until.indefinite" = "Released";
"job-delay-output-until.night" = "Night";
"job-delay-output-until.no-delay-output" = "No Delay";
"job-delay-output-until.second-shift" = "Second Shift";
"job-delay-output-until.third-shift" = "Third Shift";
"job-delay-output-until.weekend" = "Weekend";
"job-error-action" = "On Error";
"job-error-action.abort-job" = "Abort Job";
"job-error-action.cancel-job" = "Cancel Job";
"job-error-action.continue-job" = "Continue Job";
"job-error-action.suspend-job" = "Suspend Job";
"job-error-sheet" = "Print Error Sheet";
"job-error-sheet-type" = "Type of Error Sheet";
"job-error-sheet-type.none" = "None";
"job-error-sheet-type.standard" = "Standard";
"job-error-sheet-when" = "Print Error Sheet";
"job-error-sheet-when.always" = "Always";
"job-error-sheet-when.on-error" = "On Error";
"job-finishings" = "Job Finishings";
"job-hold-until" = "Hold Until";
"job-hold-until-time" = "Hold Until";
"job-hold-until.day-time" = "Daytime";
"job-hold-until.evening" = "Evening";
"job-hold-until.indefinite" = "Released";
"job-hold-until.night" = "Night";
"job-hold-until.no-hold" = "No Hold";
"job-hold-until.second-shift" = "Second Shift";
"job-hold-until.third-shift" = "Third Shift";
"job-hold-until.weekend" = "Weekend";
"job-mandatory-attributes" = "Job Mandatory Attributes";
"job-name" = "Title";
"job-phone-number" = "Job Phone Number";
"job-priority" = "Job Priority";
"job-recipient-name" = "Job Recipient Name";
"job-save-disposition" = "Job Save Disposition";
"job-sheet-message" = "Job Sheet Message";
"job-sheets" = "Banner Page";
"job-sheets-col" = "Banner Page";
"job-sheets.first-print-stream-page" = "First Page in Document";
"job-sheets.job-both-sheet" = "Start and End Sheets";
"job-sheets.job-end-sheet" = "End Sheet";
"job-sheets.job-start-sheet" = "Start Sheet";
"job-sheets.none" = "None";
"job-sheets.standard" = "Standard";
"job-state" = "Job State";
"job-state-message" = "Job State Message";
"job-state-reasons" = "Detailed Job State";
"job-state-reasons.aborted-by-system" = "Aborted By System";
"job-state-reasons.account-authorization-failed" = "Account Authorization Failed";
"job-state-reasons.account-closed" = "Account Closed";
"job-state-reasons.account-info-needed" = "Account Info Needed";
"job-state-reasons.account-limit-reached" = "Account Limit Reached";
"job-state-reasons.compression-error" = "Compression Error";
"job-state-reasons.conflicting-attributes" = "Conflicting Attributes";
"job-state-reasons.connected-to-destination" = "Connected To Destination";
"job-state-reasons.connecting-to-destination" = "Connecting To Destination";
"job-state-reasons.destination-uri-failed" = "Destination Uri Failed";
"job-state-reasons.digital-signature-did-not-verify" = "Digital Signature Did Not Verify";
"job-state-reasons.digital-signature-type-not-supported" = "Digital Signature Type Not Supported";
"job-state-reasons.document-access-error" = "Document Access Error";
"job-state-reasons.document-format-error" = "Document Format Error";
"job-state-reasons.document-password-error" = "Document Password Error";
"job-state-reasons.document-permission-error" = "Document Permission Error";
"job-state-reasons.document-security-error" = "Document Security Error";
"job-state-reasons.document-unprintable-error" = "Document Unprintable Error";
"job-state-reasons.errors-detected" = "Errors Detected";
"job-state-reasons.job-canceled-at-device" = "Job Canceled At Device";
"job-state-reasons.job-canceled-by-operator" = "Job Canceled By Operator";
"job-state-reasons.job-canceled-by-user" = "Job Canceled By User";
"job-state-reasons.job-completed-successfully" = "Job Completed Successfully";
"job-state-reasons.job-completed-with-errors" = "Job Completed With Errors";
"job-state-reasons.job-completed-with-warnings" = "Job Completed With Warnings";
"job-state-reasons.job-data-insufficient" = "Job Data Insufficient";
"job-state-reasons.job-delay-output-until-specified" = "Job Delay Output Until Specified";
"job-state-reasons.job-digital-signature-wait" = "Job Digital Signature Wait";
"job-state-reasons.job-fetchable" = "Job Fetchable";
"job-state-reasons.job-held-for-review" = "Job Held For Review";
"job-state-reasons.job-hold-until-specified" = "Job Hold Until Specified";
"job-state-reasons.job-incoming" = "Job Incoming";
"job-state-reasons.job-interpreting" = "Job Interpreting";
"job-state-reasons.job-outgoing" = "Job Outgoing";
"job-state-reasons.job-password-wait" = "Job Password Wait";
"job-state-reasons.job-printed-successfully" = "Job Printed Successfully";
"job-state-reasons.job-printed-with-errors" = "Job Printed With Errors";
"job-state-reasons.job-printed-with-warnings" = "Job Printed With Warnings";
"job-state-reasons.job-printing" = "Job Printing";
"job-state-reasons.job-queued" = "Job Queued";
"job-state-reasons.job-queued-for-marker" = "Job Queued For Marker";
"job-state-reasons.job-release-wait" = "Job Release Wait";
"job-state-reasons.job-restartable" = "Job Restartable";
"job-state-reasons.job-resuming" = "Job Resuming";
"job-state-reasons.job-saved-successfully" = "Job Saved Successfully";
"job-state-reasons.job-saved-with-errors" = "Job Saved With Errors";
"job-state-reasons.job-saved-with-warnings" = "Job Saved With Warnings";
"job-state-reasons.job-saving" = "Job Saving";
"job-state-reasons.job-spooling" = "Job Spooling";
"job-state-reasons.job-streaming" = "Job Streaming";
"job-state-reasons.job-suspended" = "Job Suspended";
"job-state-reasons.job-suspended-by-operator" = "Job Suspended By Operator";
"job-state-reasons.job-suspended-by-system" = "Job Suspended By System";
"job-state-reasons.job-suspended-by-user" = "Job Suspended By User";
"job-state-reasons.job-suspending" = "Job Suspending";
"job-state-reasons.job-transferring" = "Job Transferring";
"job-state-reasons.job-transforming" = "Job Transforming";
"job-state-reasons.none" = "None";
"job-state-reasons.printer-stopped" = "Printer Stopped";
"job-state-reasons.printer-stopped-partly" = "Printer Stopped Partly";
"job-state-reasons.processing-to-stop-point" = "Processing To Stop Point";
"job-state-reasons.queued-in-device" = "Queued In Device";
"job-state-reasons.resources-are-not-ready" = "Resources Are Not Ready";
"job-state-reasons.resources-are-not-supported" = "Resources Are Not Supported";
"job-state-reasons.service-off-line" = "Service Off Line";
"job-state-reasons.submission-interrupted" = "Submission Interrupted";
"job-state-reasons.unsupported-attributes-or-values" = "Unsupported Attributes Or Values";
"job-state-reasons.unsupported-compression" = "Unsupported Compression";
"job-state-reasons.unsupported-document-format" = "Unsupported Document Format";
"job-state-reasons.waiting-for-user-action" = "Waiting For User Action";
"job-state-reasons.warnings-detected" = "Warnings Detected";
"job-state.3" = "Pending";
"job-state.4" = "Held";
"job-state.5" = "Processing";
"job-state.6" = "Stopped";
"job-state.7" = "Canceled";
"job-state.8" = "Aborted";
"job-state.9" = "Completed";
"laminating" = "Laminate Pages";
"laminating-sides" = "Laminate";
"laminating-sides.back" = "Back Only";
"laminating-sides.both" = "Front and Back";
"laminating-sides.front" = "Front Only";
"laminating-type" = "Type of Lamination";
"laminating-type.archival" = "Archival";
"laminating-type.glossy" = "Glossy";
"laminating-type.high-gloss" = "High Gloss";
"laminating-type.matte" = "Matte";
"laminating-type.semi-gloss" = "Semi-gloss";
"laminating-type.translucent" = "Translucent";
"logo" = "Logo";
"material-amount" = "Amount of Material";
"material-amount-units" = "Amount Units";
"material-amount-units.g" = "Grams";
"material-amount-units.kg" = "Kilograms";
"material-amount-units.l" = "Liters";
"material-amount-units.m" = "Meters";
"material-amount-units.ml" = "Milliliters";
"material-amount-units.mm" = "Millimeters";
"material-color" = "Material Color";
"material-diameter" = "Material Diameter";
"material-diameter-tolerance" = "Material Diameter Tolerance";
"material-fill-density" = "Material Fill Density";
"material-name" = "Material Name";
"material-purpose" = "Use Material For";
"material-purpose.all" = "Everything";
"material-purpose.base" = "Base";
"material-purpose.in-fill" = "In-fill";
"material-purpose.shell" = "Shell";
"material-purpose.support" = "Supports";
"material-rate" = "Feed Rate";
"material-rate-units" = "Feed Rate Units";
"material-rate-units.mg_second" = "Milligrams per second";
"material-rate-units.ml_second" = "Milliliters per second";
"material-rate-units.mm_second" = "Millimeters per second";
"material-shell-thickness" = "Material Shell Thickness";
"material-temperature" = "Material Temperature";
"material-type" = "Material Type";
"material-type.abs" = "ABS";
"material-type.abs-carbon-fiber" = "Carbon Fiber ABS";
"material-type.abs-carbon-nanotube" = "Carbon Nanotube ABS";
"material-type.chocolate" = "Chocolate";
"material-type.gold" = "Gold";
"material-type.nylon" = "Nylon";
"material-type.pet" = "Pet";
"material-type.photopolymer" = "Photopolymer";
"material-type.pla" = "PLA";
"material-type.pla-conductive" = "Conductive PLA";
"material-type.pla-flexible" = "Flexible PLA";
"material-type.pla-magnetic" = "Magnetic PLA";
"material-type.pla-steel" = "Steel PLA";
"material-type.pla-stone" = "Stone PLA";
"material-type.pla-wood" = "Wood PLA";
"material-type.polycarbonate" = "Polycarbonate";
"material-type.pva-dissolvable" = "Dissolvable PVA";
"material-type.silver" = "Silver";
"material-type.titanium" = "Titanium";
"material-type.wax" = "Wax";
"materials-col" = "Materials";
"media" = "Media";
"media-back-coating" = "Back Coating of Media";
"media-back-coating.glossy" = "Glossy";
"media-back-coating.high-gloss" = "High Gloss";
"media-back-coating.matte" = "Matte";
"media-back-coating.none" = "None";
"media-back-coating.satin" = "Satin";
"media-back-coating.semi-gloss" = "Semi-gloss";
"media-bottom-margin" = "Media Bottom Margin";
"media-col" = "Media";
"media-color" = "Media Color";
"media-color.black" = "Black";
"media-color.blue" = "Blue";
"media-color.brown" = "Brown";
"media-color.buff" = "Buff";
"media-color.clear-black" = "Clear Black";
"media-color.clear-blue" = "Clear Blue";
"media-color.clear-brown" = "Clear Brown";
"media-color.clear-buff" = "Clear Buff";
"media-color.clear-cyan" = "Clear Cyan";
"media-color.clear-gold" = "Clear Gold";
"media-color.clear-goldenrod" = "Clear Goldenrod";
"media-color.clear-gray" = "Clear Gray";
"media-color.clear-green" = "Clear Green";
"media-color.clear-ivory" = "Clear Ivory";
"media-color.clear-magenta" = "Clear Magenta";
"media-color.clear-multi-color" = "Clear Multi Color";
"media-color.clear-mustard" = "Clear Mustard";
"media-color.clear-orange" = "Clear Orange";
"media-color.clear-pink" = "Clear Pink";
"media-color.clear-red" = "Clear Red";
"media-color.clear-silver" = "Clear Silver";
"media-color.clear-turquoise" = "Clear Turquoise";
"media-color.clear-violet" = "Clear Violet";
"media-color.clear-white" = "Clear White";
"media-color.clear-yellow" = "Clear Yellow";
"media-color.cyan" = "Cyan";
"media-color.dark-blue" = "Dark Blue";
"media-color.dark-brown" = "Dark Brown";
"media-color.dark-buff" = "Dark Buff";
"media-color.dark-cyan" = "Dark Cyan";
"media-color.dark-gold" = "Dark Gold";
"media-color.dark-goldenrod" = "Dark Goldenrod";
"media-color.dark-gray" = "Dark Gray";
"media-color.dark-green" = "Dark Green";
"media-color.dark-ivory" = "Dark Ivory";
"media-color.dark-magenta" = "Dark Magenta";
"media-color.dark-mustard" = "Dark Mustard";
"media-color.dark-orange" = "Dark Orange";
"media-color.dark-pink" = "Dark Pink";
"media-color.dark-red" = "Dark Red";
"media-color.dark-silver" = "Dark Silver";
"media-color.dark-turquoise" = "Dark Turquoise";
"media-color.dark-violet" = "Dark Violet";
"media-color.dark-yellow" = "Dark Yellow";
"media-color.gold" = "Gold";
"media-color.goldenrod" = "Goldenrod";
"media-color.gray" = "Gray";
"media-color.green" = "Green";
"media-color.ivory" = "Ivory";
"media-color.light-black" = "Light Black";
"media-color.light-blue" = "Light Blue";
"media-color.light-brown" = "Light Brown";
"media-color.light-buff" = "Light Buff";
"media-color.light-cyan" = "Light Cyan";
"media-color.light-gold" = "Light Gold";
"media-color.light-goldenrod" = "Light Goldenrod";
"media-color.light-gray" = "Light Gray";
"media-color.light-green" = "Light Green";
"media-color.light-ivory" = "Light Ivory";
"media-color.light-magenta" = "Light Magenta";
"media-color.light-mustard" = "Light Mustard";
"media-color.light-orange" = "Light Orange";
"media-color.light-pink" = "Light Pink";
"media-color.light-red" = "Light Red";
"media-color.light-silver" = "Light Silver";
"media-color.light-turquoise" = "Light Turquoise";
"media-color.light-violet" = "Light Violet";
"media-color.light-yellow" = "Light Yellow";
"media-color.magenta" = "Magenta";
"media-color.multi-color" = "Multi-color";
"media-color.mustard" = "Mustard";
"media-color.no-color" = "No Color";
"media-color.orange" = "Orange";
"media-color.pink" = "Pink";
"media-color.red" = "Red";
"media-color.silver" = "Silver";
"media-color.turquoise" = "Turquoise";
"media-color.violet" = "Violet";
"media-color.white" = "White";
"media-color.yellow" = "Yellow";
"media-front-coating" = "Front Coating of Media";
"media-grain" = "Media Grain";
"media-grain.x-direction" = "Cross-Feed Direction";
"media-grain.y-direction" = "Feed Direction";
"media-hole-count" = "Media Hole Count";
"media-info" = "Media Info";
"media-input-tray-check" = "Force Media";
"media-left-margin" = "Media Left Margin";
"media-pre-printed" = "Pre-printed Media";
"media-pre-printed.blank" = "Blank";
"media-pre-printed.letter-head" = "Letterhead";
"media-pre-printed.pre-printed" = "Pre-printed";
"media-recycled" = "Recycled Media";
"media-recycled.none" = "None";
"media-recycled.standard" = "Standard";
"media-right-margin" = "Media Right Margin";
"media-size" = "Media Dimensions";
"media-size-name" = "Media Name";
"media-source" = "Media Source";
"media-source.alternate" = "Alternate";
"media-source.alternate-roll" = "Alternate Roll";
"media-source.auto" = "Automatic";
"media-source.bottom" = "Bottom";
"media-source.by-pass-tray" = "By-pass Tray";
"media-source.center" = "Center";
"media-source.disc" = "Disc";
"media-source.envelope" = "Envelope";
"media-source.hagaki" = "Hagaki";
"media-source.large-capacity" = "Large Capacity";
"media-source.left" = "Left";
"media-source.main" = "Main";
"media-source.main-roll" = "Main Roll";
"media-source.manual" = "Manual";
"media-source.middle" = "Middle";
"media-source.photo" = "Photo";
"media-source.rear" = "Rear";
"media-source.right" = "Right";
"media-source.roll-1" = "Roll 1";
"media-source.roll-10" = "Roll 10";
"media-source.roll-2" = "Roll 2";
"media-source.roll-3" = "Roll 3";
"media-source.roll-4" = "Roll 4";
"media-source.roll-5" = "Roll 5";
"media-source.roll-6" = "Roll 6";
"media-source.roll-7" = "Roll 7";
"media-source.roll-8" = "Roll 8";
"media-source.roll-9" = "Roll 9";
"media-source.side" = "Side";
"media-source.top" = "Top";
"media-source.tray-1" = "Tray 1";
"media-source.tray-10" = "Tray 10";
"media-source.tray-11" = "Tray 11";
"media-source.tray-12" = "Tray 12";
"media-source.tray-13" = "Tray 13";
"media-source.tray-14" = "Tray 14";
"media-source.tray-15" = "Tray 15";
"media-source.tray-16" = "Tray 16";
"media-source.tray-17" = "Tray 17";
"media-source.tray-18" = "Tray 18";
"media-source.tray-19" = "Tray 19";
"media-source.tray-2" = "Tray 2";
"media-source.tray-20" = "Tray 20";
"media-source.tray-3" = "Tray 3";
"media-source.tray-4" = "Tray 4";
"media-source.tray-5" = "Tray 5";
"media-source.tray-6" = "Tray 6";
"media-source.tray-7" = "Tray 7";
"media-source.tray-8" = "Tray 8";
"media-source.tray-9" = "Tray 9";
"media-thickness" = "Media Thickness";
"media-tooth" = "Media Tooth (Texture)";
"media-tooth.antique" = "Antique";
"media-tooth.calendared" = "Calendared";
"media-tooth.coarse" = "Coarse";
"media-tooth.fine" = "Fine";
"media-tooth.linen" = "Linen";
"media-tooth.medium" = "Medium";
"media-tooth.smooth" = "Smooth";
"media-tooth.stipple" = "Stipple";
"media-tooth.uncalendared" = "Uncalendared";
"media-tooth.vellum" = "Vellum";
"media-top-margin" = "Media Top Margin";
"media-type" = "Media Type";
"media-type.aluminum" = "Aluminum";
"media-type.auto" = "Automatic";
"media-type.back-print-film" = "Back Print Film";
"media-type.cardboard" = "Cardboard";
"media-type.cardstock" = "Cardstock";
"media-type.cd" = "CD";
"media-type.continuous" = "Continuous";
"media-type.continuous-long" = "Continuous Long";
"media-type.continuous-short" = "Continuous Short";
"media-type.corrugated-board" = "Corrugated Board";
"media-type.disc" = "Optical Disc";
"media-type.disc-glossy" = "Glossy Optical Disc";
"media-type.disc-high-gloss" = "High Gloss Optical Disc";
"media-type.disc-matte" = "Matte Optical Disc";
"media-type.disc-satin" = "Satin Optical Disc";
"media-type.disc-semi-gloss" = "Semi-Gloss Optical Disc";
"media-type.double-wall" = "Double Wall";
"media-type.dry-film" = "Dry Film";
"media-type.dvd" = "DVD";
"media-type.embossing-foil" = "Embossing Foil";
"media-type.end-board" = "End Board";
"media-type.envelope" = "Envelope";
"media-type.envelope-archival" = "Archival Envelope";
"media-type.envelope-bond" = "Bond Envelope";
"media-type.envelope-coated" = "Coated Envelope";
"media-type.envelope-cotton" = "Cotton Envelope";
"media-type.envelope-fine" = "Fine Envelope";
"media-type.envelope-heavyweight" = "Heavyweight Envelope";
"media-type.envelope-inkjet" = "Inkjet Envelope";
"media-type.envelope-lightweight" = "Lightweight Envelope";
"media-type.envelope-plain" = "Plain Envelope";
"media-type.envelope-preprinted" = "Preprinted Envelope";
"media-type.envelope-window" = "Windowed Envelope";
"media-type.fabric" = "Fabric";
"media-type.fabric-archival" = "Archival Fabric";
"media-type.fabric-glossy" = "Glossy Fabric";
"media-type.fabric-high-gloss" = "High Gloss Fabric";
"media-type.fabric-matte" = "Matte Fabric";
"media-type.fabric-semi-gloss" = "Semi-Gloss Fabric";
"media-type.fabric-waterproof" = "Waterproof Fabric";
"media-type.film" = "Film";
"media-type.flexo-base" = "Flexo Base";
"media-type.flexo-photo-polymer" = "Flexo Photo Polymer";
"media-type.flute" = "Flute";
"media-type.foil" = "Foil";
"media-type.full-cut-tabs" = "Full Cut Tabs";
"media-type.glass" = "Glass";
"media-type.glass-colored" = "Glass Colored";
"media-type.glass-opaque" = "Glass Opaque";
"media-type.glass-surfaced" = "Glass Surfaced";
"media-type.glass-textured" = "Glass Textured";
"media-type.gravure-cylinder" = "Gravure Cylinder";
"media-type.image-setter-paper" = "Image Setter Paper";
"media-type.imaging-cylinder" = "Imaging Cylinder";
"media-type.labels" = "Labels";
"media-type.labels-colored" = "Colored Labels";
"media-type.labels-glossy" = "Glossy Labels";
"media-type.labels-high-gloss" = "High Gloss Labels";
"media-type.labels-inkjet" = "Inkjet Labels";
"media-type.labels-matte" = "Matte Labels";
"media-type.labels-permanent" = "Permanent Labels";
"media-type.labels-satin" = "Satin Labels";
"media-type.labels-security" = "Security Labels";
"media-type.labels-semi-gloss" = "Semi-Gloss Labels";
"media-type.laminating-foil" = "Laminating Foil";
"media-type.letterhead" = "Letterhead";
"media-type.metal" = "Metal";
"media-type.metal-glossy" = "Metal Glossy";
"media-type.metal-high-gloss" = "Metal High Gloss";
"media-type.metal-matte" = "Metal Matte";
"media-type.metal-satin" = "Metal Satin";
"media-type.metal-semi-gloss" = "Metal Semi Gloss";
"media-type.mounting-tape" = "Mounting Tape";
"media-type.multi-layer" = "Multi Layer";
"media-type.multi-part-form" = "Multi Part Form";
"media-type.other" = "Other";
"media-type.paper" = "Paper";
"media-type.photographic" = "Photo Paper";
"media-type.photographic-archival" = "Photographic Archival";
"media-type.photographic-film" = "Photo Film";
"media-type.photographic-glossy" = "Glossy Photo Paper";
"media-type.photographic-high-gloss" = "High Gloss Photo Paper";
"media-type.photographic-matte" = "Matte Photo Paper";
"media-type.photographic-satin" = "Satin Photo Paper";
"media-type.photographic-semi-gloss" = "Semi-Gloss Photo Paper";
"media-type.plastic" = "Plastic";
"media-type.plastic-archival" = "Plastic Archival";
"media-type.plastic-colored" = "Plastic Colored";
"media-type.plastic-glossy" = "Plastic Glossy";
"media-type.plastic-high-gloss" = "Plastic High Gloss";
"media-type.plastic-matte" = "Plastic Matte";
"media-type.plastic-satin" = "Plastic Satin";
"media-type.plastic-semi-gloss" = "Plastic Semi Gloss";
"media-type.plate" = "Plate";
"media-type.polyester" = "Polyester";
"media-type.pre-cut-tabs" = "Pre Cut Tabs";
"media-type.roll" = "Roll";
"media-type.screen" = "Screen";
"media-type.screen-paged" = "Screen Paged";
"media-type.self-adhesive" = "Self Adhesive";
"media-type.self-adhesive-film" = "Self Adhesive Film";
"media-type.shrink-foil" = "Shrink Foil";
"media-type.single-face" = "Single Face";
"media-type.single-wall" = "Single Wall";
"media-type.sleeve" = "Sleeve";
"media-type.stationery" = "Stationery";
"media-type.stationery-archival" = "Stationery Archival";
"media-type.stationery-coated" = "Coated Paper";
"media-type.stationery-cotton" = "Stationery Cotton";
"media-type.stationery-fine" = "Vellum Paper";
"media-type.stationery-heavyweight" = "Heavyweight Paper";
"media-type.stationery-heavyweight-coated" = "Stationery Heavyweight Coated";
"media-type.stationery-inkjet" = "Stationery Inkjet Paper";
"media-type.stationery-letterhead" = "Letterhead";
"media-type.stationery-lightweight" = "Lightweight Paper";
"media-type.stationery-preprinted" = "Preprinted Paper";
"media-type.stationery-prepunched" = "Punched Paper";
"media-type.tab-stock" = "Tab Stock";
"media-type.tractor" = "Tractor";
"media-type.transfer" = "Transfer";
"media-type.transparency" = "Transparency";
"media-type.triple-wall" = "Triple Wall";
"media-type.wet-film" = "Wet Film";
"media-weight-metric" = "Media Weight (grams per m²)";
"media.asme_f_28x40in" = "28 x 40″";
"media.choice_iso_a4_210x297mm_na_letter_8.5x11in" = "A4 or US Letter";
"media.iso_2a0_1189x1682mm" = "2a0";
"media.iso_a0_841x1189mm" = "A0";
"media.iso_a0x3_1189x2523mm" = "A0x3";
"media.iso_a10_26x37mm" = "A10";
"media.iso_a1_594x841mm" = "A1";
"media.iso_a1x3_841x1783mm" = "A1x3";
"media.iso_a1x4_841x2378mm" = "A1x4";
"media.iso_a2_420x594mm" = "A2";
"media.iso_a2x3_594x1261mm" = "A2x3";
"media.iso_a2x4_594x1682mm" = "A2x4";
"media.iso_a2x5_594x2102mm" = "A2x5";
"media.iso_a3-extra_322x445mm" = "A3 (Extra)";
"media.iso_a3_297x420mm" = "A3";
"media.iso_a3x3_420x891mm" = "A3x3";
"media.iso_a3x4_420x1189mm" = "A3x4";
"media.iso_a3x5_420x1486mm" = "A3x5";
"media.iso_a3x6_420x1783mm" = "A3x6";
"media.iso_a3x7_420x2080mm" = "A3x7";
"media.iso_a4-extra_235.5x322.3mm" = "A4 (Extra)";
"media.iso_a4-tab_225x297mm" = "A4 (Tab)";
"media.iso_a4_210x297mm" = "A4";
"media.iso_a4x3_297x630mm" = "A4x3";
"media.iso_a4x4_297x841mm" = "A4x4";
"media.iso_a4x5_297x1051mm" = "A4x5";
"media.iso_a4x6_297x1261mm" = "A4x6";
"media.iso_a4x7_297x1471mm" = "A4x7";
"media.iso_a4x8_297x1682mm" = "A4x8";
"media.iso_a4x9_297x1892mm" = "A4x9";
"media.iso_a5-extra_174x235mm" = "A5 (Extra)";
"media.iso_a5_148x210mm" = "A5";
"media.iso_a6_105x148mm" = "A6";
"media.iso_a7_74x105mm" = "A7";
"media.iso_a8_52x74mm" = "A8";
"media.iso_a9_37x52mm" = "A9";
"media.iso_b0_1000x1414mm" = "B0";
"media.iso_b10_31x44mm" = "B10";
"media.iso_b1_707x1000mm" = "B1";
"media.iso_b2_500x707mm" = "B2";
"media.iso_b3_353x500mm" = "B3";
"media.iso_b4_250x353mm" = "B4";
"media.iso_b5-extra_201x276mm" = "B5 (Extra)";
"media.iso_b5_176x250mm" = "B5 Envelope";
"media.iso_b6_125x176mm" = "B6";
"media.iso_b6c4_125x324mm" = "B6/C4 Envelope";
"media.iso_b7_88x125mm" = "B7";
"media.iso_b8_62x88mm" = "B8";
"media.iso_b9_44x62mm" = "B9";
"media.iso_c0_917x1297mm" = "C0 Envelope";
"media.iso_c10_28x40mm" = "C10 Envelope";
"media.iso_c1_648x917mm" = "C1 Envelope";
"media.iso_c2_458x648mm" = "C2 Envelope";
"media.iso_c3_324x458mm" = "C3 Envelope";
"media.iso_c4_229x324mm" = "C4 Envelope";
"media.iso_c5_162x229mm" = "C5 Envelope";
"media.iso_c6_114x162mm" = "C6 Envelope";
"media.iso_c6c5_114x229mm" = "C6c5 Envelope";
"media.iso_c7_81x114mm" = "C7 Envelope";
"media.iso_c7c6_81x162mm" = "C7c6 Envelope";
"media.iso_c8_57x81mm" = "C8 Envelope";
"media.iso_c9_40x57mm" = "C9 Envelope";
"media.iso_dl_110x220mm" = "DL Envelope";
"media.iso_ra0_860x1220mm" = "ISO RA0";
"media.iso_ra1_610x860mm" = "ISO RA1";
"media.iso_ra2_430x610mm" = "ISO RA2";
"media.iso_ra3_305x430mm" = "ISO RA3";
"media.iso_ra4_215x305mm" = "ISO RA4";
"media.iso_sra0_900x1280mm" = "ISO SRA0";
"media.iso_sra1_640x900mm" = "ISO SRA1";
"media.iso_sra2_450x640mm" = "ISO SRA2";
"media.iso_sra3_320x450mm" = "ISO SRA3";
"media.iso_sra4_225x320mm" = "ISO SRA4";
"media.jis_b0_1030x1456mm" = "JIS B0";
"media.jis_b10_32x45mm" = "JIS B10";
"media.jis_b1_728x1030mm" = "JIS B1";
"media.jis_b2_515x728mm" = "JIS B2";
"media.jis_b3_364x515mm" = "JIS B3";
"media.jis_b4_257x364mm" = "JIS B4";
"media.jis_b5_182x257mm" = "JIS B5";
"media.jis_b6_128x182mm" = "JIS B6";
"media.jis_b7_91x128mm" = "JIS B7";
"media.jis_b8_64x91mm" = "JIS B8";
"media.jis_b9_45x64mm" = "JIS B9";
"media.jis_exec_216x330mm" = "JIS Executive";
"media.jpn_chou2_111.1x146mm" = "Chou 2 Envelope";
"media.jpn_chou3_120x235mm" = "Chou 3 Envelope";
"media.jpn_chou4_90x205mm" = "Chou 4 Envelope";
"media.jpn_hagaki_100x148mm" = "Hagaki";
"media.jpn_kahu_240x322.1mm" = "Kahu Envelope";
"media.jpn_kaku2_240x332mm" = "Kahu 2 Envelope";
"media.jpn_kaku3_216x277mm" = "216 x 277mm";
"media.jpn_kaku4_197x267mm" = "197 x 267mm";
"media.jpn_kaku5_190x240mm" = "190 x 240mm";
"media.jpn_kaku7_142x205mm" = "142 x 205mm";
"media.jpn_kaku8_119x197mm" = "119 x 197mm";
"media.jpn_oufuku_148x200mm" = "Oufuku Reply Postcard";
"media.jpn_you4_105x235mm" = "You 4 Envelope";
"media.na_10x11_10x11in" = "10 x 11″";
"media.na_10x13_10x13in" = "10 x 13″";
"media.na_10x14_10x14in" = "10 x 14″";
"media.na_10x15_10x15in" = "10 x 15″";
"media.na_11x12_11x12in" = "11 x 12″";
"media.na_11x15_11x15in" = "11 x 15″";
"media.na_12x19_12x19in" = "12 x 19″";
"media.na_5x7_5x7in" = "5 x 7″";
"media.na_6x9_6x9in" = "6 x 9″";
"media.na_7x9_7x9in" = "7 x 9″";
"media.na_9x11_9x11in" = "9 x 11″";
"media.na_a2_4.375x5.75in" = "A2 Envelope";
"media.na_arch-a_9x12in" = "9 x 12″";
"media.na_arch-b_12x18in" = "12 x 18″";
"media.na_arch-c_18x24in" = "18 x 24″";
"media.na_arch-d_24x36in" = "24 x 36″";
"media.na_arch-e2_26x38in" = "26 x 38″";
"media.na_arch-e3_27x39in" = "27 x 39″";
"media.na_arch-e_36x48in" = "36 x 48″";
"media.na_b-plus_12x19.17in" = "12 x 19.17″";
"media.na_c5_6.5x9.5in" = "C5 Envelope";
"media.na_c_17x22in" = "17 x 22″";
"media.na_d_22x34in" = "22 x 34″";
"media.na_e_34x44in" = "34 x 44″";
"media.na_edp_11x14in" = "11 x 14″";
"media.na_eur-edp_12x14in" = "12 x 14″";
"media.na_executive_7.25x10.5in" = "Executive";
"media.na_f_44x68in" = "44 x 68″";
"media.na_fanfold-eur_8.5x12in" = "European Fanfold";
"media.na_fanfold-us_11x14.875in" = "US Fanfold";
"media.na_foolscap_8.5x13in" = "Foolscap";
"media.na_govt-legal_8x13in" = "8 x 13″";
"media.na_govt-letter_8x10in" = "8 x 10″";
"media.na_index-3x5_3x5in" = "3 x 5″";
"media.na_index-4x6-ext_6x8in" = "6 x 8″";
"media.na_index-4x6_4x6in" = "4 x 6″";
"media.na_index-5x8_5x8in" = "5 x 8″";
"media.na_invoice_5.5x8.5in" = "Statement";
"media.na_ledger_11x17in" = "11 x 17″";
"media.na_legal-extra_9.5x15in" = "US Legal (Extra)";
"media.na_legal_8.5x14in" = "US Legal";
"media.na_letter-extra_9.5x12in" = "US Letter (Extra)";
"media.na_letter-plus_8.5x12.69in" = "US Letter (Plus)";
"media.na_letter_8.5x11in" = "US Letter";
"media.na_monarch_3.875x7.5in" = "Monarch Envelope";
"media.na_number-10_4.125x9.5in" = "#10 Envelope";
"media.na_number-11_4.5x10.375in" = "#11 Envelope";
"media.na_number-12_4.75x11in" = "#12 Envelope";
"media.na_number-14_5x11.5in" = "#14 Envelope";
"media.na_number-9_3.875x8.875in" = "#9 Envelope";
"media.na_oficio_8.5x13.4in" = "8.5 x 13.4″";
"media.na_personal_3.625x6.5in" = "Personal Envelope";
"media.na_quarto_8.5x10.83in" = "Quarto";
"media.na_super-a_8.94x14in" = "8.94 x 14″";
"media.na_super-b_13x19in" = "13 x 19″";
"media.na_wide-format_30x42in" = "30 x 42″";
"media.oe_12x16_12x16in" = "12 x 16″";
"media.oe_14x17_14x17in" = "14 x 17″";
"media.oe_18x22_18x22in" = "18 x 22″";
"media.oe_a2plus_17x24in" = "17 x 24″";
"media.oe_photo-10r_10x12in" = "10 x 12″";
"media.oe_photo-20r_20x24in" = "20 x 24″";
"media.oe_photo-l_3.5x5in" = "3.5 x 5″";
"media.oe_photo-s10r_10x15in" = "10 x 15″";
"media.om_16k_184x260mm" = "184 x 260mm";
"media.om_16k_195x270mm" = "195 x 270mm";
"media.om_dai-pa-kai_275x395mm" = "275 x 395mm";
"media.om_folio-sp_215x315mm" = "Folio";
"media.om_folio_210x330mm" = "Folio (Special)";
"media.om_invite_220x220mm" = "Invitation Envelope";
"media.om_italian_110x230mm" = "Italian Envelope";
"media.om_juuro-ku-kai_198x275mm" = "198 x 275mm";
"media.om_large-photo_200x300" = "200 x 300";
"media.om_medium-photo_130x180mm" = "130 x 180mm";
"media.om_pa-kai_267x389mm" = "267 x 389mm";
"media.om_postfix_114x229mm" = "Postfix Envelope";
"media.om_small-photo_100x150mm" = "100 x 150mm";
"media.om_wide-photo_100x200mm" = "100 x 200mm";
"media.prc_10_324x458mm" = "Chinese #10 Envelope";
"media.prc_16k_146x215mm" = "Chinese 16k";
"media.prc_1_102x165mm" = "Chinese #1 Envelope";
"media.prc_2_102x176mm" = "Chinese #2 Envelope";
"media.prc_32k_97x151mm" = "Chinese 32k";
"media.prc_3_125x176mm" = "Chinese #3 Envelope";
"media.prc_4_110x208mm" = "Chinese #4 Envelope";
"media.prc_5_110x220mm" = "Chinese #5 Envelope";
"media.prc_6_120x320mm" = "Chinese #6 Envelope";
"media.prc_7_160x230mm" = "Chinese #7 Envelope";
"media.prc_8_120x309mm" = "Chinese #8 Envelope";
"media.roc_16k_7.75x10.75in" = "ROC 16k";
"media.roc_8k_10.75x15.5in" = "ROC 8k";
"multiple-document-handling" = "Multiple Document Handling";
"multiple-document-handling.separate-documents-collated-copies" = "Separate Documents Collated Copies";
"multiple-document-handling.separate-documents-uncollated-copies" = "Separate Documents Uncollated Copies";
"multiple-document-handling.single-document" = "Single Document";
"multiple-document-handling.single-document-new-sheet" = "Single Document New Sheet";
"multiple-object-handling" = "Multiple Object Handling";
"multiple-object-handling.auto" = "Automatic";
"multiple-object-handling.best-fit" = "Best Fit";
"multiple-object-handling.best-quality" = "Best Quality";
"multiple-object-handling.best-speed" = "Best Speed";
"multiple-object-handling.one-at-a-time" = "One At A Time";
"multiple-operation-time-out-action" = "On Timeout";
"multiple-operation-time-out-action.abort-job" = "Abort Job";
"multiple-operation-time-out-action.hold-job" = "Hold Job";
"multiple-operation-time-out-action.process-job" = "Process Job";
"noise-removal" = "Noise Removal";
"notify-attributes" = "Notify Attributes";
"notify-charset" = "Notify Charset";
"notify-events" = "Notify Events";
"notify-events.document-completed" = "Document Completed";
"notify-events.document-config-changed" = "Document Config Changed";
"notify-events.document-created" = "Document Created";
"notify-events.document-fetchable" = "Document Fetchable";
"notify-events.document-state-changed" = "Document State Changed";
"notify-events.document-stopped" = "Document Stopped";
"notify-events.job-completed" = "Job Completed";
"notify-events.job-config-changed" = "Job Config Changed";
"notify-events.job-created" = "Job Created";
"notify-events.job-fetchable" = "Job Fetchable";
"notify-events.job-progress" = "Job Progress";
"notify-events.job-state-changed" = "Job State Changed";
"notify-events.job-stopped" = "Job Stopped";
"notify-events.none" = "None";
"notify-events.printer-config-changed" = "Printer Config Changed";
"notify-events.printer-finishings-changed" = "Printer Finishings Changed";
"notify-events.printer-media-changed" = "Printer Media Changed";
"notify-events.printer-queue-order-changed" = "Printer Queue Order Changed";
"notify-events.printer-restarted" = "Printer Restarted";
"notify-events.printer-shutdown" = "Printer Shutdown";
"notify-events.printer-state-changed" = "Printer State Changed";
"notify-events.printer-stopped" = "Printer Stopped";
"notify-get-interval" = "Notify Get Interval";
"notify-lease-duration" = "Notify Lease Duration";
"notify-natural-language" = "Notify Natural Language";
"notify-pull-method" = "Notify Pull Method";
"notify-recipient-uri" = "Notify Recipient";
"notify-sequence-numbers" = "Notify Sequence Numbers";
"notify-subscription-ids" = "Notify Subscription Ids";
"notify-time-interval" = "Notify Time Interval";
"notify-user-data" = "Notify User Data";
"notify-wait" = "Notify Wait";
"number-of-retries" = "Number Of Retries";
"number-up" = "Number-Up";
"object-offset" = "Object Offset";
"object-size" = "Object Size";
"organization-name" = "Organization Name";
"orientation-requested" = "Orientation";
"orientation-requested.3" = "Portrait";
"orientation-requested.4" = "Landscape";
"orientation-requested.5" = "Reverse Landscape";
"orientation-requested.6" = "Reverse Portrait";
"orientation-requested.7" = "None";
"output-attributes" = "Scanned Image Options";
"output-bin" = "Output Tray";
"output-bin.auto" = "Automatic";
"output-bin.bottom" = "Bottom";
"output-bin.center" = "Center";
"output-bin.face-down" = "Face Down";
"output-bin.face-up" = "Face Up";
"output-bin.large-capacity" = "Large Capacity";
"output-bin.left" = "Left";
"output-bin.mailbox-1" = "Mailbox 1";
"output-bin.mailbox-10" = "Mailbox 10";
"output-bin.mailbox-2" = "Mailbox 2";
"output-bin.mailbox-3" = "Mailbox 3";
"output-bin.mailbox-4" = "Mailbox 4";
"output-bin.mailbox-5" = "Mailbox 5";
"output-bin.mailbox-6" = "Mailbox 6";
"output-bin.mailbox-7" = "Mailbox 7";
"output-bin.mailbox-8" = "Mailbox 8";
"output-bin.mailbox-9" = "Mailbox 9";
"output-bin.middle" = "Middle";
"output-bin.my-mailbox" = "My Mailbox";
"output-bin.rear" = "Rear";
"output-bin.right" = "Right";
"output-bin.side" = "Side";
"output-bin.stacker-1" = "Stacker 1";
"output-bin.stacker-10" = "Stacker 10";
"output-bin.stacker-2" = "Stacker 2";
"output-bin.stacker-3" = "Stacker 3";
"output-bin.stacker-4" = "Stacker 4";
"output-bin.stacker-5" = "Stacker 5";
"output-bin.stacker-6" = "Stacker 6";
"output-bin.stacker-7" = "Stacker 7";
"output-bin.stacker-8" = "Stacker 8";
"output-bin.stacker-9" = "Stacker 9";
"output-bin.top" = "Top";
"output-bin.tray-1" = "Tray 1";
"output-bin.tray-10" = "Tray 10";
"output-bin.tray-2" = "Tray 2";
"output-bin.tray-3" = "Tray 3";
"output-bin.tray-4" = "Tray 4";
"output-bin.tray-5" = "Tray 5";
"output-bin.tray-6" = "Tray 6";
"output-bin.tray-7" = "Tray 7";
"output-bin.tray-8" = "Tray 8";
"output-bin.tray-9" = "Tray 9";
"output-compression-quality-factor" = "Scanned Image Quality";
"page-delivery" = "Page Delivery";
"page-delivery.reverse-order-face-down" = "Reverse Order Face-down";
"page-delivery.reverse-order-face-up" = "Reverse Order Face-up";
"page-delivery.same-order-face-down" = "Same Order Face-down";
"page-delivery.same-order-face-up" = "Same Order Face-up";
"page-delivery.system-specified" = "System Specified";
"page-order-received" = "Page Order Received";
"page-order-received.1-to-n-order" = "1 To N";
"page-order-received.n-to-1-order" = "N To 1";
"page-ranges" = "Page Ranges";
"pages" = "Pages";
"pages-per-subset" = "Pages Per Subset";
"platform-shape" = "Platform Shape";
"platform-shape.ellipse" = "Round";
"platform-shape.rectangle" = "Rectangle";
"platform-temperature" = "Platform Temperature";
"post-dial-string" = "Post-dial String";
"pre-dial-string" = "Pre-dial String";
"presentation-direction-number-up" = "Number-Up Layout";
"presentation-direction-number-up.tobottom-toleft" = "Top-bottom, Right-left";
"presentation-direction-number-up.tobottom-toright" = "Top-bottom, Left-right";
"presentation-direction-number-up.toleft-tobottom" = "Right-left, Top-bottom";
"presentation-direction-number-up.toleft-totop" = "Right-left, Bottom-top";
"presentation-direction-number-up.toright-tobottom" = "Left-right, Top-bottom";
"presentation-direction-number-up.toright-totop" = "Left-right, Bottom-top";
"presentation-direction-number-up.totop-toleft" = "Bottom-top, Right-left";
"presentation-direction-number-up.totop-toright" = "Bottom-top, Left-right";
"print-accuracy" = "Print Accuracy";
"print-base" = "Print Base";
"print-base.brim" = "Brim";
"print-base.none" = "None";
"print-base.raft" = "Raft";
"print-base.skirt" = "Skirt";
"print-base.standard" = "Standard";
"print-color-mode" = "Print Color Mode";
"print-color-mode.auto" = "Automatic";
"print-color-mode.bi-level" = "Text";
"print-color-mode.color" = "Color";
"print-color-mode.highlight" = "Highlight";
"print-color-mode.monochrome" = "Monochrome";
"print-color-mode.process-bi-level" = "Process Text";
"print-color-mode.process-monochrome" = "Process Monochrome";
"print-content-optimize" = "Print Optimization";
"print-content-optimize.auto" = "Automatic";
"print-content-optimize.graphic" = "Graphics";
"print-content-optimize.photo" = "Photo";
"print-content-optimize.text" = "Text";
"print-content-optimize.text-and-graphic" = "Text and Graphics";
"print-objects" = "Print Objects";
"print-quality" = "Print Quality";
"print-quality.3" = "Draft";
"print-quality.4" = "Normal";
"print-quality.5" = "High";
"print-rendering-intent" = "Print Rendering Intent";
"print-rendering-intent.absolute" = "Absolute";
"print-rendering-intent.auto" = "Automatic";
"print-rendering-intent.perceptual" = "Perceptual";
"print-rendering-intent.relative" = "Relative";
"print-rendering-intent.relative-bpc" = "Relative w/Black Point Compensation";
"print-rendering-intent.saturation" = "Saturation";
"print-scaling" = "Print Scaling";
"print-scaling.auto" = "Automatic";
"print-scaling.auto-fit" = "Auto-fit";
"print-scaling.fill" = "Fill";
"print-scaling.fit" = "Fit";
"print-scaling.none" = "None";
"print-supports" = "Print Supports";
"print-supports.material" = "With Specified Material";
"print-supports.none" = "None";
"print-supports.standard" = "Standard";
"printer-message-from-operator" = "Message From Operator";
"printer-resolution" = "Print Resolution";
"printer-state" = "Printer State";
"printer-state-reasons" = "Detailed Printer State";
"printer-state-reasons.alert-removal-of-binary-change-entry" = "Old Alerts Have Been Removed";
"printer-state-reasons.bander-added" = "Bander Added";
"printer-state-reasons.bander-almost-empty" = "Bander Almost Empty";
"printer-state-reasons.bander-almost-full" = "Bander Almost Full";
"printer-state-reasons.bander-at-limit" = "Bander At Limit";
"printer-state-reasons.bander-closed" = "Bander Closed";
"printer-state-reasons.bander-configuration-change" = "Bander Configuration Change";
"printer-state-reasons.bander-cover-closed" = "Bander Cover Closed";
"printer-state-reasons.bander-cover-open" = "Bander Cover Open";
"printer-state-reasons.bander-empty" = "Bander Empty";
"printer-state-reasons.bander-full" = "Bander Full";
"printer-state-reasons.bander-interlock-closed" = "Bander Interlock Closed";
"printer-state-reasons.bander-interlock-open" = "Bander Interlock Open";
"printer-state-reasons.bander-jam" = "Bander Jam";
"printer-state-reasons.bander-life-almost-over" = "Bander Life Almost Over";
"printer-state-reasons.bander-life-over" = "Bander Life Over";
"printer-state-reasons.bander-memory-exhausted" = "Bander Memory Exhausted";
"printer-state-reasons.bander-missing" = "Bander Missing";
"printer-state-reasons.bander-motor-failure" = "Bander Motor Failure";
"printer-state-reasons.bander-near-limit" = "Bander Near Limit";
"printer-state-reasons.bander-offline" = "Bander Offline";
"printer-state-reasons.bander-opened" = "Bander Opened";
"printer-state-reasons.bander-over-temperature" = "Bander Over Temperature";
"printer-state-reasons.bander-power-saver" = "Bander Power Saver";
"printer-state-reasons.bander-recoverable-failure" = "Bander Recoverable Failure";
"printer-state-reasons.bander-recoverable-storage" = "Bander Recoverable Storage";
"printer-state-reasons.bander-removed" = "Bander Removed";
"printer-state-reasons.bander-resource-added" = "Bander Resource Added";
"printer-state-reasons.bander-resource-removed" = "Bander Resource Removed";
"printer-state-reasons.bander-thermistor-failure" = "Bander Thermistor Failure";
"printer-state-reasons.bander-timing-failure" = "Bander Timing Failure";
"printer-state-reasons.bander-turned-off" = "Bander Turned Off";
"printer-state-reasons.bander-turned-on" = "Bander Turned On";
"printer-state-reasons.bander-under-temperature" = "Bander Under Temperature";
"printer-state-reasons.bander-unrecoverable-failure" = "Bander Unrecoverable Failure";
"printer-state-reasons.bander-unrecoverable-storage-error" = "Bander Unrecoverable Storage Error";
"printer-state-reasons.bander-warming-up" = "Bander Warming Up";
"printer-state-reasons.binder-added" = "Binder Added";
"printer-state-reasons.binder-almost-empty" = "Binder Almost Empty";
"printer-state-reasons.binder-almost-full" = "Binder Almost Full";
"printer-state-reasons.binder-at-limit" = "Binder At Limit";
"printer-state-reasons.binder-closed" = "Binder Closed";
"printer-state-reasons.binder-configuration-change" = "Binder Configuration Change";
"printer-state-reasons.binder-cover-closed" = "Binder Cover Closed";
"printer-state-reasons.binder-cover-open" = "Binder Cover Open";
"printer-state-reasons.binder-empty" = "Binder Empty";
"printer-state-reasons.binder-full" = "Binder Full";
"printer-state-reasons.binder-interlock-closed" = "Binder Interlock Closed";
"printer-state-reasons.binder-interlock-open" = "Binder Interlock Open";
"printer-state-reasons.binder-jam" = "Binder Jam";
"printer-state-reasons.binder-life-almost-over" = "Binder Life Almost Over";
"printer-state-reasons.binder-life-over" = "Binder Life Over";
"printer-state-reasons.binder-memory-exhausted" = "Binder Memory Exhausted";
"printer-state-reasons.binder-missing" = "Binder Missing";
"printer-state-reasons.binder-motor-failure" = "Binder Motor Failure";
"printer-state-reasons.binder-near-limit" = "Binder Near Limit";
"printer-state-reasons.binder-offline" = "Binder Offline";
"printer-state-reasons.binder-opened" = "Binder Opened";
"printer-state-reasons.binder-over-temperature" = "Binder Over Temperature";
"printer-state-reasons.binder-power-saver" = "Binder Power Saver";
"printer-state-reasons.binder-recoverable-failure" = "Binder Recoverable Failure";
"printer-state-reasons.binder-recoverable-storage" = "Binder Recoverable Storage";
"printer-state-reasons.binder-removed" = "Binder Removed";
"printer-state-reasons.binder-resource-added" = "Binder Resource Added";
"printer-state-reasons.binder-resource-removed" = "Binder Resource Removed";
"printer-state-reasons.binder-thermistor-failure" = "Binder Thermistor Failure";
"printer-state-reasons.binder-timing-failure" = "Binder Timing Failure";
"printer-state-reasons.binder-turned-off" = "Binder Turned Off";
"printer-state-reasons.binder-turned-on" = "Binder Turned On";
"printer-state-reasons.binder-under-temperature" = "Binder Under Temperature";
"printer-state-reasons.binder-unrecoverable-failure" = "Binder Unrecoverable Failure";
"printer-state-reasons.binder-unrecoverable-storage-error" = "Binder Unrecoverable Storage Error";
"printer-state-reasons.binder-warming-up" = "Binder Warming Up";
"printer-state-reasons.camera-failure" = "Camera Failure";
"printer-state-reasons.chamber-cooling" = "Chamber Cooling";
"printer-state-reasons.chamber-heating" = "Chamber Heating";
"printer-state-reasons.chamber-temperature-high" = "Chamber Temperature High";
"printer-state-reasons.chamber-temperature-low" = "Chamber Temperature Low";
"printer-state-reasons.cleaner-life-almost-over" = "Cleaner Life Almost Over";
"printer-state-reasons.cleaner-life-over" = "Cleaner Life Over";
"printer-state-reasons.configuration-change" = "Configuration Change";
"printer-state-reasons.connecting-to-device" = "Connecting To Device";
"printer-state-reasons.cover-open" = "Cover Open";
"printer-state-reasons.deactivated" = "Deactivated";
"printer-state-reasons.developer-empty" = "Developer Empty";
"printer-state-reasons.developer-low" = "Developer Low";
"printer-state-reasons.die-cutter-added" = "Die Cutter Added";
"printer-state-reasons.die-cutter-almost-empty" = "Die Cutter Almost Empty";
"printer-state-reasons.die-cutter-almost-full" = "Die Cutter Almost Full";
"printer-state-reasons.die-cutter-at-limit" = "Die Cutter At Limit";
"printer-state-reasons.die-cutter-closed" = "Die Cutter Closed";
"printer-state-reasons.die-cutter-configuration-change" = "Die Cutter Configuration Change";
"printer-state-reasons.die-cutter-cover-closed" = "Die Cutter Cover Closed";
"printer-state-reasons.die-cutter-cover-open" = "Die Cutter Cover Open";
"printer-state-reasons.die-cutter-empty" = "Die Cutter Empty";
"printer-state-reasons.die-cutter-full" = "Die Cutter Full";
"printer-state-reasons.die-cutter-interlock-closed" = "Die Cutter Interlock Closed";
"printer-state-reasons.die-cutter-interlock-open" = "Die Cutter Interlock Open";
"printer-state-reasons.die-cutter-jam" = "Die Cutter Jam";
"printer-state-reasons.die-cutter-life-almost-over" = "Die Cutter Life Almost Over";
"printer-state-reasons.die-cutter-life-over" = "Die Cutter Life Over";
"printer-state-reasons.die-cutter-memory-exhausted" = "Die Cutter Memory Exhausted";
"printer-state-reasons.die-cutter-missing" = "Die Cutter Missing";
"printer-state-reasons.die-cutter-motor-failure" = "Die Cutter Motor Failure";
"printer-state-reasons.die-cutter-near-limit" = "Die Cutter Near Limit";
"printer-state-reasons.die-cutter-offline" = "Die Cutter Offline";
"printer-state-reasons.die-cutter-opened" = "Die Cutter Opened";
"printer-state-reasons.die-cutter-over-temperature" = "Die Cutter Over Temperature";
"printer-state-reasons.die-cutter-power-saver" = "Die Cutter Power Saver";
"printer-state-reasons.die-cutter-recoverable-failure" = "Die Cutter Recoverable Failure";
"printer-state-reasons.die-cutter-recoverable-storage" = "Die Cutter Recoverable Storage";
"printer-state-reasons.die-cutter-removed" = "Die Cutter Removed";
"printer-state-reasons.die-cutter-resource-added" = "Die Cutter Resource Added";
"printer-state-reasons.die-cutter-resource-removed" = "Die Cutter Resource Removed";
"printer-state-reasons.die-cutter-thermistor-failure" = "Die Cutter Thermistor Failure";
"printer-state-reasons.die-cutter-timing-failure" = "Die Cutter Timing Failure";
"printer-state-reasons.die-cutter-turned-off" = "Die Cutter Turned Off";
"printer-state-reasons.die-cutter-turned-on" = "Die Cutter Turned On";
"printer-state-reasons.die-cutter-under-temperature" = "Die Cutter Under Temperature";
"printer-state-reasons.die-cutter-unrecoverable-failure" = "Die Cutter Unrecoverable Failure";
"printer-state-reasons.die-cutter-unrecoverable-storage-error" = "Die Cutter Unrecoverable Storage Error";
"printer-state-reasons.die-cutter-warming-up" = "Die Cutter Warming Up";
"printer-state-reasons.door-open" = "Door Open";
"printer-state-reasons.extruder-cooling" = "Extruder Cooling";
"printer-state-reasons.extruder-failure" = "Extruder Failure";
"printer-state-reasons.extruder-heating" = "Extruder Heating";
"printer-state-reasons.extruder-jam" = "Extruder Jam";
"printer-state-reasons.extruder-temperature-high" = "Extruder Temperature High";
"printer-state-reasons.extruder-temperature-low" = "Extruder Temperature Low";
"printer-state-reasons.fan-failure" = "Fan Failure";
"printer-state-reasons.folder-added" = "Folder Added";
"printer-state-reasons.folder-almost-empty" = "Folder Almost Empty";
"printer-state-reasons.folder-almost-full" = "Folder Almost Full";
"printer-state-reasons.folder-at-limit" = "Folder At Limit";
"printer-state-reasons.folder-closed" = "Folder Closed";
"printer-state-reasons.folder-configuration-change" = "Folder Configuration Change";
"printer-state-reasons.folder-cover-closed" = "Folder Cover Closed";
"printer-state-reasons.folder-cover-open" = "Folder Cover Open";
"printer-state-reasons.folder-empty" = "Folder Empty";
"printer-state-reasons.folder-full" = "Folder Full";
"printer-state-reasons.folder-interlock-closed" = "Folder Interlock Closed";
"printer-state-reasons.folder-interlock-open" = "Folder Interlock Open";
"printer-state-reasons.folder-jam" = "Folder Jam";
"printer-state-reasons.folder-life-almost-over" = "Folder Life Almost Over";
"printer-state-reasons.folder-life-over" = "Folder Life Over";
"printer-state-reasons.folder-memory-exhausted" = "Folder Memory Exhausted";
"printer-state-reasons.folder-missing" = "Folder Missing";
"printer-state-reasons.folder-motor-failure" = "Folder Motor Failure";
"printer-state-reasons.folder-near-limit" = "Folder Near Limit";
"printer-state-reasons.folder-offline" = "Folder Offline";
"printer-state-reasons.folder-opened" = "Folder Opened";
"printer-state-reasons.folder-over-temperature" = "Folder Over Temperature";
"printer-state-reasons.folder-power-saver" = "Folder Power Saver";
"printer-state-reasons.folder-recoverable-failure" = "Folder Recoverable Failure";
"printer-state-reasons.folder-recoverable-storage" = "Folder Recoverable Storage";
"printer-state-reasons.folder-removed" = "Folder Removed";
"printer-state-reasons.folder-resource-added" = "Folder Resource Added";
"printer-state-reasons.folder-resource-removed" = "Folder Resource Removed";
"printer-state-reasons.folder-thermistor-failure" = "Folder Thermistor Failure";
"printer-state-reasons.folder-timing-failure" = "Folder Timing Failure";
"printer-state-reasons.folder-turned-off" = "Folder Turned Off";
"printer-state-reasons.folder-turned-on" = "Folder Turned On";
"printer-state-reasons.folder-under-temperature" = "Folder Under Temperature";
"printer-state-reasons.folder-unrecoverable-failure" = "Folder Unrecoverable Failure";
"printer-state-reasons.folder-unrecoverable-storage-error" = "Folder Unrecoverable Storage Error";
"printer-state-reasons.folder-warming-up" = "Folder Warming Up";
"printer-state-reasons.fuser-over-temp" = "Fuser Over Temp";
"printer-state-reasons.fuser-under-temp" = "Fuser Under Temp";
"printer-state-reasons.hold-new-jobs" = "Hold New Jobs";
"printer-state-reasons.identify-printer-requested" = "Identify Printer";
"printer-state-reasons.imprinter-added" = "Imprinter Added";
"printer-state-reasons.imprinter-almost-empty" = "Imprinter Almost Empty";
"printer-state-reasons.imprinter-almost-full" = "Imprinter Almost Full";
"printer-state-reasons.imprinter-at-limit" = "Imprinter At Limit";
"printer-state-reasons.imprinter-closed" = "Imprinter Closed";
"printer-state-reasons.imprinter-configuration-change" = "Imprinter Configuration Change";
"printer-state-reasons.imprinter-cover-closed" = "Imprinter Cover Closed";
"printer-state-reasons.imprinter-cover-open" = "Imprinter Cover Open";
"printer-state-reasons.imprinter-empty" = "Imprinter Empty";
"printer-state-reasons.imprinter-full" = "Imprinter Full";
"printer-state-reasons.imprinter-interlock-closed" = "Imprinter Interlock Closed";
"printer-state-reasons.imprinter-interlock-open" = "Imprinter Interlock Open";
"printer-state-reasons.imprinter-jam" = "Imprinter Jam";
"printer-state-reasons.imprinter-life-almost-over" = "Imprinter Life Almost Over";
"printer-state-reasons.imprinter-life-over" = "Imprinter Life Over";
"printer-state-reasons.imprinter-memory-exhausted" = "Imprinter Memory Exhausted";
"printer-state-reasons.imprinter-missing" = "Imprinter Missing";
"printer-state-reasons.imprinter-motor-failure" = "Imprinter Motor Failure";
"printer-state-reasons.imprinter-near-limit" = "Imprinter Near Limit";
"printer-state-reasons.imprinter-offline" = "Imprinter Offline";
"printer-state-reasons.imprinter-opened" = "Imprinter Opened";
"printer-state-reasons.imprinter-over-temperature" = "Imprinter Over Temperature";
"printer-state-reasons.imprinter-power-saver" = "Imprinter Power Saver";
"printer-state-reasons.imprinter-recoverable-failure" = "Imprinter Recoverable Failure";
"printer-state-reasons.imprinter-recoverable-storage" = "Imprinter Recoverable Storage";
"printer-state-reasons.imprinter-removed" = "Imprinter Removed";
"printer-state-reasons.imprinter-resource-added" = "Imprinter Resource Added";
"printer-state-reasons.imprinter-resource-removed" = "Imprinter Resource Removed";
"printer-state-reasons.imprinter-thermistor-failure" = "Imprinter Thermistor Failure";
"printer-state-reasons.imprinter-timing-failure" = "Imprinter Timing Failure";
"printer-state-reasons.imprinter-turned-off" = "Imprinter Turned Off";
"printer-state-reasons.imprinter-turned-on" = "Imprinter Turned On";
"printer-state-reasons.imprinter-under-temperature" = "Imprinter Under Temperature";
"printer-state-reasons.imprinter-unrecoverable-failure" = "Imprinter Unrecoverable Failure";
"printer-state-reasons.imprinter-unrecoverable-storage-error" = "Imprinter Unrecoverable Storage Error";
"printer-state-reasons.imprinter-warming-up" = "Imprinter Warming Up";
"printer-state-reasons.input-cannot-feed-size-selected" = "Input Cannot Feed Size Selected";
"printer-state-reasons.input-manual-input-request" = "Input Manual Input Request";
"printer-state-reasons.input-media-color-change" = "Input Media Color Change";
"printer-state-reasons.input-media-form-parts-change" = "Input Media Form Parts Change";
"printer-state-reasons.input-media-size-change" = "Input Media Size Change";
"printer-state-reasons.input-media-type-change" = "Input Media Type Change";
"printer-state-reasons.input-media-weight-change" = "Input Media Weight Change";
"printer-state-reasons.input-tray-elevation-failure" = "Input Tray Elevation Failure";
"printer-state-reasons.input-tray-missing" = "Input Tray Missing";
"printer-state-reasons.input-tray-position-failure" = "Input Tray Position Failure";
"printer-state-reasons.inserter-added" = "Inserter Added";
"printer-state-reasons.inserter-almost-empty" = "Inserter Almost Empty";
"printer-state-reasons.inserter-almost-full" = "Inserter Almost Full";
"printer-state-reasons.inserter-at-limit" = "Inserter At Limit";
"printer-state-reasons.inserter-closed" = "Inserter Closed";
"printer-state-reasons.inserter-configuration-change" = "Inserter Configuration Change";
"printer-state-reasons.inserter-cover-closed" = "Inserter Cover Closed";
"printer-state-reasons.inserter-cover-open" = "Inserter Cover Open";
"printer-state-reasons.inserter-empty" = "Inserter Empty";
"printer-state-reasons.inserter-full" = "Inserter Full";
"printer-state-reasons.inserter-interlock-closed" = "Inserter Interlock Closed";
"printer-state-reasons.inserter-interlock-open" = "Inserter Interlock Open";
"printer-state-reasons.inserter-jam" = "Inserter Jam";
"printer-state-reasons.inserter-life-almost-over" = "Inserter Life Almost Over";
"printer-state-reasons.inserter-life-over" = "Inserter Life Over";
"printer-state-reasons.inserter-memory-exhausted" = "Inserter Memory Exhausted";
"printer-state-reasons.inserter-missing" = "Inserter Missing";
"printer-state-reasons.inserter-motor-failure" = "Inserter Motor Failure";
"printer-state-reasons.inserter-near-limit" = "Inserter Near Limit";
"printer-state-reasons.inserter-offline" = "Inserter Offline";
"printer-state-reasons.inserter-opened" = "Inserter Opened";
"printer-state-reasons.inserter-over-temperature" = "Inserter Over Temperature";
"printer-state-reasons.inserter-power-saver" = "Inserter Power Saver";
"printer-state-reasons.inserter-recoverable-failure" = "Inserter Recoverable Failure";
"printer-state-reasons.inserter-recoverable-storage" = "Inserter Recoverable Storage";
"printer-state-reasons.inserter-removed" = "Inserter Removed";
"printer-state-reasons.inserter-resource-added" = "Inserter Resource Added";
"printer-state-reasons.inserter-resource-removed" = "Inserter Resource Removed";
"printer-state-reasons.inserter-thermistor-failure" = "Inserter Thermistor Failure";
"printer-state-reasons.inserter-timing-failure" = "Inserter Timing Failure";
"printer-state-reasons.inserter-turned-off" = "Inserter Turned Off";
"printer-state-reasons.inserter-turned-on" = "Inserter Turned On";
"printer-state-reasons.inserter-under-temperature" = "Inserter Under Temperature";
"printer-state-reasons.inserter-unrecoverable-failure" = "Inserter Unrecoverable Failure";
"printer-state-reasons.inserter-unrecoverable-storage-error" = "Inserter Unrecoverable Storage Error";
"printer-state-reasons.inserter-warming-up" = "Inserter Warming Up";
"printer-state-reasons.interlock-closed" = "Interlock Closed";
"printer-state-reasons.interlock-open" = "Interlock Open";
"printer-state-reasons.interpreter-cartridge-added" = "Interpreter Cartridge Added";
"printer-state-reasons.interpreter-cartridge-deleted" = "Interpreter Cartridge Removed";
"printer-state-reasons.interpreter-complex-page-encountered" = "Interpreter Complex Page Encountered";
"printer-state-reasons.interpreter-memory-decrease" = "Interpreter Memory Decrease";
"printer-state-reasons.interpreter-memory-increase" = "Interpreter Memory Increase";
"printer-state-reasons.interpreter-resource-added" = "Interpreter Resource Added";
"printer-state-reasons.interpreter-resource-deleted" = "Interpreter Resource Deleted";
"printer-state-reasons.interpreter-resource-unavailable" = "Interpreter Resource Unavailable";
"printer-state-reasons.lamp-at-eol" = "Lamp At End of Life";
"printer-state-reasons.lamp-failure" = "Lamp Failure";
"printer-state-reasons.lamp-near-eol" = "Lamp Near End of Life";
"printer-state-reasons.laser-at-eol" = "Laser At End of Life";
"printer-state-reasons.laser-failure" = "Laser Failure";
"printer-state-reasons.laser-near-eol" = "Laser Near End of Life";
"printer-state-reasons.make-envelope-added" = "Envelope Maker Added";
"printer-state-reasons.make-envelope-almost-empty" = "Envelope Maker Almost Empty";
"printer-state-reasons.make-envelope-almost-full" = "Envelope Maker Almost Full";
"printer-state-reasons.make-envelope-at-limit" = "Envelope Maker At Limit";
"printer-state-reasons.make-envelope-closed" = "Envelope Maker Closed";
"printer-state-reasons.make-envelope-configuration-change" = "Envelope Maker Configuration Change";
"printer-state-reasons.make-envelope-cover-closed" = "Envelope Maker Cover Closed";
"printer-state-reasons.make-envelope-cover-open" = "Envelope Maker Cover Open";
"printer-state-reasons.make-envelope-empty" = "Envelope Maker Empty";
"printer-state-reasons.make-envelope-full" = "Envelope Maker Full";
"printer-state-reasons.make-envelope-interlock-closed" = "Envelope Maker Interlock Closed";
"printer-state-reasons.make-envelope-interlock-open" = "Envelope Maker Interlock Open";
"printer-state-reasons.make-envelope-jam" = "Envelope Maker Jam";
"printer-state-reasons.make-envelope-life-almost-over" = "Envelope Maker Life Almost Over";
"printer-state-reasons.make-envelope-life-over" = "Envelope Maker Life Over";
"printer-state-reasons.make-envelope-memory-exhausted" = "Envelope Maker Memory Exhausted";
"printer-state-reasons.make-envelope-missing" = "Envelope Maker Missing";
"printer-state-reasons.make-envelope-motor-failure" = "Envelope Maker Motor Failure";
"printer-state-reasons.make-envelope-near-limit" = "Envelope Maker Near Limit";
"printer-state-reasons.make-envelope-offline" = "Envelope Maker Offline";
"printer-state-reasons.make-envelope-opened" = "Envelope Maker Opened";
"printer-state-reasons.make-envelope-over-temperature" = "Envelope Maker Over Temperature";
"printer-state-reasons.make-envelope-power-saver" = "Envelope Maker Power Saver";
"printer-state-reasons.make-envelope-recoverable-failure" = "Envelope Maker Recoverable Failure";
"printer-state-reasons.make-envelope-recoverable-storage" = "Envelope Maker Recoverable Storage";
"printer-state-reasons.make-envelope-removed" = "Envelope Maker Removed";
"printer-state-reasons.make-envelope-resource-added" = "Envelope Maker Resource Added";
"printer-state-reasons.make-envelope-resource-removed" = "Envelope Maker Resource Removed";
"printer-state-reasons.make-envelope-thermistor-failure" = "Envelope Maker Thermistor Failure";
"printer-state-reasons.make-envelope-timing-failure" = "Envelope Maker Timing Failure";
"printer-state-reasons.make-envelope-turned-off" = "Envelope Maker Turned Off";
"printer-state-reasons.make-envelope-turned-on" = "Envelope Maker Turned On";
"printer-state-reasons.make-envelope-under-temperature" = "Envelope Maker Under Temperature";
"printer-state-reasons.make-envelope-unrecoverable-failure" = "Envelope Maker Unrecoverable Failure";
"printer-state-reasons.make-envelope-unrecoverable-storage-error" = "Envelope Maker Unrecoverable Storage Error";
"printer-state-reasons.make-envelope-warming-up" = "Envelope Maker Warming Up";
"printer-state-reasons.marker-adjusting-print-quality" = "Marker Adjusting Print Quality";
"printer-state-reasons.marker-developer-almost-empty" = "Marker Developer Almost Empty";
"printer-state-reasons.marker-developer-empty" = "Marker Developer Empty";
"printer-state-reasons.marker-fuser-thermistor-failure" = "Marker Fuser Thermistor Failure";
"printer-state-reasons.marker-fuser-timing-failure" = "Marker Fuser Timing Failure";
"printer-state-reasons.marker-ink-almost-empty" = "Marker Ink Almost Empty";
"printer-state-reasons.marker-ink-empty" = "Marker Ink Empty";
"printer-state-reasons.marker-print-ribbon-almost-empty" = "Marker Print Ribbon Almost Empty";
"printer-state-reasons.marker-print-ribbon-empty" = "Marker Print Ribbon Empty";
"printer-state-reasons.marker-supply-empty" = "Marker Supply Empty";
"printer-state-reasons.marker-supply-low" = "Marker Supply Low";
"printer-state-reasons.marker-toner-cartridge-missing" = "Marker Toner Cartridge Missing";
"printer-state-reasons.marker-waste-almost-full" = "Marker Waste Almost Full";
"printer-state-reasons.marker-waste-full" = "Marker Waste Full";
"printer-state-reasons.marker-waste-ink-receptacle-almost-full" = "Marker Waste Ink Receptacle Almost Full";
"printer-state-reasons.marker-waste-ink-receptacle-full" = "Marker Waste Ink Receptacle Full";
"printer-state-reasons.marker-waste-toner-receptacle-almost-full" = "Marker Waste Toner Receptacle Almost Full";
"printer-state-reasons.marker-waste-toner-receptacle-full" = "Marker Waste Toner Receptacle Full";
"printer-state-reasons.material-empty" = "Material Empty";
"printer-state-reasons.material-low" = "Material Low";
"printer-state-reasons.material-needed" = "Material Needed";
"printer-state-reasons.media-empty" = "Media Empty";
"printer-state-reasons.media-jam" = "Media Jam";
"printer-state-reasons.media-low" = "Media Low";
"printer-state-reasons.media-needed" = "Media Needed";
"printer-state-reasons.media-path-cannot-duplex-media-selected" = "Media Path Cannot Do 2-Sided Printing";
"printer-state-reasons.media-path-media-tray-almost-full" = "Media Path Media Tray Almost Full";
"printer-state-reasons.media-path-media-tray-full" = "Media Path Media Tray Full";
"printer-state-reasons.media-path-media-tray-missing" = "Media Path Media Tray Missing";
"printer-state-reasons.motor-failure" = "Motor Failure";
"printer-state-reasons.moving-to-paused" = "Moving To Paused";
"printer-state-reasons.none" = "None";
"printer-state-reasons.opc-life-over" = "Optical Photoconductor Life Over";
"printer-state-reasons.opc-near-eol" = "Optical Photoconductor Near End-of-life";
"printer-state-reasons.other" = "Other";
"printer-state-reasons.output-area-almost-full" = "Output Area Almost Full";
"printer-state-reasons.output-area-full" = "Output Area Full";
"printer-state-reasons.output-mailbox-select-failure" = "Output Mailbox Select Failure";
"printer-state-reasons.output-tray-missing" = "Output Tray Missing";
"printer-state-reasons.paused" = "Paused";
"printer-state-reasons.perforater-added" = "Perforater Added";
"printer-state-reasons.perforater-almost-empty" = "Perforater Almost Empty";
"printer-state-reasons.perforater-almost-full" = "Perforater Almost Full";
"printer-state-reasons.perforater-at-limit" = "Perforater At Limit";
"printer-state-reasons.perforater-closed" = "Perforater Closed";
"printer-state-reasons.perforater-configuration-change" = "Perforater Configuration Change";
"printer-state-reasons.perforater-cover-closed" = "Perforater Cover Closed";
"printer-state-reasons.perforater-cover-open" = "Perforater Cover Open";
"printer-state-reasons.perforater-empty" = "Perforater Empty";
"printer-state-reasons.perforater-full" = "Perforater Full";
"printer-state-reasons.perforater-interlock-closed" = "Perforater Interlock Closed";
"printer-state-reasons.perforater-interlock-open" = "Perforater Interlock Open";
"printer-state-reasons.perforater-jam" = "Perforater Jam";
"printer-state-reasons.perforater-life-almost-over" = "Perforater Life Almost Over";
"printer-state-reasons.perforater-life-over" = "Perforater Life Over";
"printer-state-reasons.perforater-memory-exhausted" = "Perforater Memory Exhausted";
"printer-state-reasons.perforater-missing" = "Perforater Missing";
"printer-state-reasons.perforater-motor-failure" = "Perforater Motor Failure";
"printer-state-reasons.perforater-near-limit" = "Perforater Near Limit";
"printer-state-reasons.perforater-offline" = "Perforater Offline";
"printer-state-reasons.perforater-opened" = "Perforater Opened";
"printer-state-reasons.perforater-over-temperature" = "Perforater Over Temperature";
"printer-state-reasons.perforater-power-saver" = "Perforater Power Saver";
"printer-state-reasons.perforater-recoverable-failure" = "Perforater Recoverable Failure";
"printer-state-reasons.perforater-recoverable-storage" = "Perforater Recoverable Storage";
"printer-state-reasons.perforater-removed" = "Perforater Removed";
"printer-state-reasons.perforater-resource-added" = "Perforater Resource Added";
"printer-state-reasons.perforater-resource-removed" = "Perforater Resource Removed";
"printer-state-reasons.perforater-thermistor-failure" = "Perforater Thermistor Failure";
"printer-state-reasons.perforater-timing-failure" = "Perforater Timing Failure";
"printer-state-reasons.perforater-turned-off" = "Perforater Turned Off";
"printer-state-reasons.perforater-turned-on" = "Perforater Turned On";
"printer-state-reasons.perforater-under-temperature" = "Perforater Under Temperature";
"printer-state-reasons.perforater-unrecoverable-failure" = "Perforater Unrecoverable Failure";
"printer-state-reasons.perforater-unrecoverable-storage-error" = "Perforater Unrecoverable Storage Error";
"printer-state-reasons.perforater-warming-up" = "Perforater Warming Up";
"printer-state-reasons.power-down" = "Power Down";
"printer-state-reasons.power-up" = "Power Up";
"printer-state-reasons.printer-manual-reset" = "Printer Reset Manually";
"printer-state-reasons.printer-nms-reset" = "Printer Reset Remotely";
"printer-state-reasons.printer-ready-to-print" = "Printer Ready To Print";
"printer-state-reasons.puncher-added" = "Puncher Added";
"printer-state-reasons.puncher-almost-empty" = "Puncher Almost Empty";
"printer-state-reasons.puncher-almost-full" = "Puncher Almost Full";
"printer-state-reasons.puncher-at-limit" = "Puncher At Limit";
"printer-state-reasons.puncher-closed" = "Puncher Closed";
"printer-state-reasons.puncher-configuration-change" = "Puncher Configuration Change";
"printer-state-reasons.puncher-cover-closed" = "Puncher Cover Closed";
"printer-state-reasons.puncher-cover-open" = "Puncher Cover Open";
"printer-state-reasons.puncher-empty" = "Puncher Empty";
"printer-state-reasons.puncher-full" = "Puncher Full";
"printer-state-reasons.puncher-interlock-closed" = "Puncher Interlock Closed";
"printer-state-reasons.puncher-interlock-open" = "Puncher Interlock Open";
"printer-state-reasons.puncher-jam" = "Puncher Jam";
"printer-state-reasons.puncher-life-almost-over" = "Puncher Life Almost Over";
"printer-state-reasons.puncher-life-over" = "Puncher Life Over";
"printer-state-reasons.puncher-memory-exhausted" = "Puncher Memory Exhausted";
"printer-state-reasons.puncher-missing" = "Puncher Missing";
"printer-state-reasons.puncher-motor-failure" = "Puncher Motor Failure";
"printer-state-reasons.puncher-near-limit" = "Puncher Near Limit";
"printer-state-reasons.puncher-offline" = "Puncher Offline";
"printer-state-reasons.puncher-opened" = "Puncher Opened";
"printer-state-reasons.puncher-over-temperature" = "Puncher Over Temperature";
"printer-state-reasons.puncher-power-saver" = "Puncher Power Saver";
"printer-state-reasons.puncher-recoverable-failure" = "Puncher Recoverable Failure";
"printer-state-reasons.puncher-recoverable-storage" = "Puncher Recoverable Storage";
"printer-state-reasons.puncher-removed" = "Puncher Removed";
"printer-state-reasons.puncher-resource-added" = "Puncher Resource Added";
"printer-state-reasons.puncher-resource-removed" = "Puncher Resource Removed";
"printer-state-reasons.puncher-thermistor-failure" = "Puncher Thermistor Failure";
"printer-state-reasons.puncher-timing-failure" = "Puncher Timing Failure";
"printer-state-reasons.puncher-turned-off" = "Puncher Turned Off";
"printer-state-reasons.puncher-turned-on" = "Puncher Turned On";
"printer-state-reasons.puncher-under-temperature" = "Puncher Under Temperature";
"printer-state-reasons.puncher-unrecoverable-failure" = "Puncher Unrecoverable Failure";
"printer-state-reasons.puncher-unrecoverable-storage-error" = "Puncher Unrecoverable Storage Error";
"printer-state-reasons.puncher-warming-up" = "Puncher Warming Up";
"printer-state-reasons.separation-cutter-added" = "Separation Cutter Added";
"printer-state-reasons.separation-cutter-almost-empty" = "Separation Cutter Almost Empty";
"printer-state-reasons.separation-cutter-almost-full" = "Separation Cutter Almost Full";
"printer-state-reasons.separation-cutter-at-limit" = "Separation Cutter At Limit";
"printer-state-reasons.separation-cutter-closed" = "Separation Cutter Closed";
"printer-state-reasons.separation-cutter-configuration-change" = "Separation Cutter Configuration Change";
"printer-state-reasons.separation-cutter-cover-closed" = "Separation Cutter Cover Closed";
"printer-state-reasons.separation-cutter-cover-open" = "Separation Cutter Cover Open";
"printer-state-reasons.separation-cutter-empty" = "Separation Cutter Empty";
"printer-state-reasons.separation-cutter-full" = "Separation Cutter Full";
"printer-state-reasons.separation-cutter-interlock-closed" = "Separation Cutter Interlock Closed";
"printer-state-reasons.separation-cutter-interlock-open" = "Separation Cutter Interlock Open";
"printer-state-reasons.separation-cutter-jam" = "Separation Cutter Jam";
"printer-state-reasons.separation-cutter-life-almost-over" = "Separation Cutter Life Almost Over";
"printer-state-reasons.separation-cutter-life-over" = "Separation Cutter Life Over";
"printer-state-reasons.separation-cutter-memory-exhausted" = "Separation Cutter Memory Exhausted";
"printer-state-reasons.separation-cutter-missing" = "Separation Cutter Missing";
"printer-state-reasons.separation-cutter-motor-failure" = "Separation Cutter Motor Failure";
"printer-state-reasons.separation-cutter-near-limit" = "Separation Cutter Near Limit";
"printer-state-reasons.separation-cutter-offline" = "Separation Cutter Offline";
"printer-state-reasons.separation-cutter-opened" = "Separation Cutter Opened";
"printer-state-reasons.separation-cutter-over-temperature" = "Separation Cutter Over Temperature";
"printer-state-reasons.separation-cutter-power-saver" = "Separation Cutter Power Saver";
"printer-state-reasons.separation-cutter-recoverable-failure" = "Separation Cutter Recoverable Failure";
"printer-state-reasons.separation-cutter-recoverable-storage" = "Separation Cutter Recoverable Storage";
"printer-state-reasons.separation-cutter-removed" = "Separation Cutter Removed";
"printer-state-reasons.separation-cutter-resource-added" = "Separation Cutter Resource Added";
"printer-state-reasons.separation-cutter-resource-removed" = "Separation Cutter Resource Removed";
"printer-state-reasons.separation-cutter-thermistor-failure" = "Separation Cutter Thermistor Failure";
"printer-state-reasons.separation-cutter-timing-failure" = "Separation Cutter Timing Failure";
"printer-state-reasons.separation-cutter-turned-off" = "Separation Cutter Turned Off";
"printer-state-reasons.separation-cutter-turned-on" = "Separation Cutter Turned On";
"printer-state-reasons.separation-cutter-under-temperature" = "Separation Cutter Under Temperature";
"printer-state-reasons.separation-cutter-unrecoverable-failure" = "Separation Cutter Unrecoverable Failure";
"printer-state-reasons.separation-cutter-unrecoverable-storage-error" = "Separation Cutter Unrecoverable Storage Error";
"printer-state-reasons.separation-cutter-warming-up" = "Separation Cutter Warming Up";
"printer-state-reasons.sheet-rotator-added" = "Sheet Rotator Added";
"printer-state-reasons.sheet-rotator-almost-empty" = "Sheet Rotator Almost Empty";
"printer-state-reasons.sheet-rotator-almost-full" = "Sheet Rotator Almost Full";
"printer-state-reasons.sheet-rotator-at-limit" = "Sheet Rotator At Limit";
"printer-state-reasons.sheet-rotator-closed" = "Sheet Rotator Closed";
"printer-state-reasons.sheet-rotator-configuration-change" = "Sheet Rotator Configuration Change";
"printer-state-reasons.sheet-rotator-cover-closed" = "Sheet Rotator Cover Closed";
"printer-state-reasons.sheet-rotator-cover-open" = "Sheet Rotator Cover Open";
"printer-state-reasons.sheet-rotator-empty" = "Sheet Rotator Empty";
"printer-state-reasons.sheet-rotator-full" = "Sheet Rotator Full";
"printer-state-reasons.sheet-rotator-interlock-closed" = "Sheet Rotator Interlock Closed";
"printer-state-reasons.sheet-rotator-interlock-open" = "Sheet Rotator Interlock Open";
"printer-state-reasons.sheet-rotator-jam" = "Sheet Rotator Jam";
"printer-state-reasons.sheet-rotator-life-almost-over" = "Sheet Rotator Life Almost Over";
"printer-state-reasons.sheet-rotator-life-over" = "Sheet Rotator Life Over";
"printer-state-reasons.sheet-rotator-memory-exhausted" = "Sheet Rotator Memory Exhausted";
"printer-state-reasons.sheet-rotator-missing" = "Sheet Rotator Missing";
"printer-state-reasons.sheet-rotator-motor-failure" = "Sheet Rotator Motor Failure";
"printer-state-reasons.sheet-rotator-near-limit" = "Sheet Rotator Near Limit";
"printer-state-reasons.sheet-rotator-offline" = "Sheet Rotator Offline";
"printer-state-reasons.sheet-rotator-opened" = "Sheet Rotator Opened";
"printer-state-reasons.sheet-rotator-over-temperature" = "Sheet Rotator Over Temperature";
"printer-state-reasons.sheet-rotator-power-saver" = "Sheet Rotator Power Saver";
"printer-state-reasons.sheet-rotator-recoverable-failure" = "Sheet Rotator Recoverable Failure";
"printer-state-reasons.sheet-rotator-recoverable-storage" = "Sheet Rotator Recoverable Storage";
"printer-state-reasons.sheet-rotator-removed" = "Sheet Rotator Removed";
"printer-state-reasons.sheet-rotator-resource-added" = "Sheet Rotator Resource Added";
"printer-state-reasons.sheet-rotator-resource-removed" = "Sheet Rotator Resource Removed";
"printer-state-reasons.sheet-rotator-thermistor-failure" = "Sheet Rotator Thermistor Failure";
"printer-state-reasons.sheet-rotator-timing-failure" = "Sheet Rotator Timing Failure";
"printer-state-reasons.sheet-rotator-turned-off" = "Sheet Rotator Turned Off";
"printer-state-reasons.sheet-rotator-turned-on" = "Sheet Rotator Turned On";
"printer-state-reasons.sheet-rotator-under-temperature" = "Sheet Rotator Under Temperature";
"printer-state-reasons.sheet-rotator-unrecoverable-failure" = "Sheet Rotator Unrecoverable Failure";
"printer-state-reasons.sheet-rotator-unrecoverable-storage-error" = "Sheet Rotator Unrecoverable Storage Error";
"printer-state-reasons.sheet-rotator-warming-up" = "Sheet Rotator Warming Up";
"printer-state-reasons.shutdown" = "Shutdown";
"printer-state-reasons.slitter-added" = "Slitter Added";
"printer-state-reasons.slitter-almost-empty" = "Slitter Almost Empty";
"printer-state-reasons.slitter-almost-full" = "Slitter Almost Full";
"printer-state-reasons.slitter-at-limit" = "Slitter At Limit";
"printer-state-reasons.slitter-closed" = "Slitter Closed";
"printer-state-reasons.slitter-configuration-change" = "Slitter Configuration Change";
"printer-state-reasons.slitter-cover-closed" = "Slitter Cover Closed";
"printer-state-reasons.slitter-cover-open" = "Slitter Cover Open";
"printer-state-reasons.slitter-empty" = "Slitter Empty";
"printer-state-reasons.slitter-full" = "Slitter Full";
"printer-state-reasons.slitter-interlock-closed" = "Slitter Interlock Closed";
"printer-state-reasons.slitter-interlock-open" = "Slitter Interlock Open";
"printer-state-reasons.slitter-jam" = "Slitter Jam";
"printer-state-reasons.slitter-life-almost-over" = "Slitter Life Almost Over";
"printer-state-reasons.slitter-life-over" = "Slitter Life Over";
"printer-state-reasons.slitter-memory-exhausted" = "Slitter Memory Exhausted";
"printer-state-reasons.slitter-missing" = "Slitter Missing";
"printer-state-reasons.slitter-motor-failure" = "Slitter Motor Failure";
"printer-state-reasons.slitter-near-limit" = "Slitter Near Limit";
"printer-state-reasons.slitter-offline" = "Slitter Offline";
"printer-state-reasons.slitter-opened" = "Slitter Opened";
"printer-state-reasons.slitter-over-temperature" = "Slitter Over Temperature";
"printer-state-reasons.slitter-power-saver" = "Slitter Power Saver";
"printer-state-reasons.slitter-recoverable-failure" = "Slitter Recoverable Failure";
"printer-state-reasons.slitter-recoverable-storage" = "Slitter Recoverable Storage";
"printer-state-reasons.slitter-removed" = "Slitter Removed";
"printer-state-reasons.slitter-resource-added" = "Slitter Resource Added";
"printer-state-reasons.slitter-resource-removed" = "Slitter Resource Removed";
"printer-state-reasons.slitter-thermistor-failure" = "Slitter Thermistor Failure";
"printer-state-reasons.slitter-timing-failure" = "Slitter Timing Failure";
"printer-state-reasons.slitter-turned-off" = "Slitter Turned Off";
"printer-state-reasons.slitter-turned-on" = "Slitter Turned On";
"printer-state-reasons.slitter-under-temperature" = "Slitter Under Temperature";
"printer-state-reasons.slitter-unrecoverable-failure" = "Slitter Unrecoverable Failure";
"printer-state-reasons.slitter-unrecoverable-storage-error" = "Slitter Unrecoverable Storage Error";
"printer-state-reasons.slitter-warming-up" = "Slitter Warming Up";
"printer-state-reasons.spool-area-full" = "Spool Area Full";
"printer-state-reasons.stacker-added" = "Stacker Added";
"printer-state-reasons.stacker-almost-empty" = "Stacker Almost Empty";
"printer-state-reasons.stacker-almost-full" = "Stacker Almost Full";
"printer-state-reasons.stacker-at-limit" = "Stacker At Limit";
"printer-state-reasons.stacker-closed" = "Stacker Closed";
"printer-state-reasons.stacker-configuration-change" = "Stacker Configuration Change";
"printer-state-reasons.stacker-cover-closed" = "Stacker Cover Closed";
"printer-state-reasons.stacker-cover-open" = "Stacker Cover Open";
"printer-state-reasons.stacker-empty" = "Stacker Empty";
"printer-state-reasons.stacker-full" = "Stacker Full";
"printer-state-reasons.stacker-interlock-closed" = "Stacker Interlock Closed";
"printer-state-reasons.stacker-interlock-open" = "Stacker Interlock Open";
"printer-state-reasons.stacker-jam" = "Stacker Jam";
"printer-state-reasons.stacker-life-almost-over" = "Stacker Life Almost Over";
"printer-state-reasons.stacker-life-over" = "Stacker Life Over";
"printer-state-reasons.stacker-memory-exhausted" = "Stacker Memory Exhausted";
"printer-state-reasons.stacker-missing" = "Stacker Missing";
"printer-state-reasons.stacker-motor-failure" = "Stacker Motor Failure";
"printer-state-reasons.stacker-near-limit" = "Stacker Near Limit";
"printer-state-reasons.stacker-offline" = "Stacker Offline";
"printer-state-reasons.stacker-opened" = "Stacker Opened";
"printer-state-reasons.stacker-over-temperature" = "Stacker Over Temperature";
"printer-state-reasons.stacker-power-saver" = "Stacker Power Saver";
"printer-state-reasons.stacker-recoverable-failure" = "Stacker Recoverable Failure";
"printer-state-reasons.stacker-recoverable-storage" = "Stacker Recoverable Storage";
"printer-state-reasons.stacker-removed" = "Stacker Removed";
"printer-state-reasons.stacker-resource-added" = "Stacker Resource Added";
"printer-state-reasons.stacker-resource-removed" = "Stacker Resource Removed";
"printer-state-reasons.stacker-thermistor-failure" = "Stacker Thermistor Failure";
"printer-state-reasons.stacker-timing-failure" = "Stacker Timing Failure";
"printer-state-reasons.stacker-turned-off" = "Stacker Turned Off";
"printer-state-reasons.stacker-turned-on" = "Stacker Turned On";
"printer-state-reasons.stacker-under-temperature" = "Stacker Under Temperature";
"printer-state-reasons.stacker-unrecoverable-failure" = "Stacker Unrecoverable Failure";
"printer-state-reasons.stacker-unrecoverable-storage-error" = "Stacker Unrecoverable Storage Error";
"printer-state-reasons.stacker-warming-up" = "Stacker Warming Up";
"printer-state-reasons.stapler-added" = "Stapler Added";
"printer-state-reasons.stapler-almost-empty" = "Stapler Almost Empty";
"printer-state-reasons.stapler-almost-full" = "Stapler Almost Full";
"printer-state-reasons.stapler-at-limit" = "Stapler At Limit";
"printer-state-reasons.stapler-closed" = "Stapler Closed";
"printer-state-reasons.stapler-configuration-change" = "Stapler Configuration Change";
"printer-state-reasons.stapler-cover-closed" = "Stapler Cover Closed";
"printer-state-reasons.stapler-cover-open" = "Stapler Cover Open";
"printer-state-reasons.stapler-empty" = "Stapler Empty";
"printer-state-reasons.stapler-full" = "Stapler Full";
"printer-state-reasons.stapler-interlock-closed" = "Stapler Interlock Closed";
"printer-state-reasons.stapler-interlock-open" = "Stapler Interlock Open";
"printer-state-reasons.stapler-jam" = "Stapler Jam";
"printer-state-reasons.stapler-life-almost-over" = "Stapler Life Almost Over";
"printer-state-reasons.stapler-life-over" = "Stapler Life Over";
"printer-state-reasons.stapler-memory-exhausted" = "Stapler Memory Exhausted";
"printer-state-reasons.stapler-missing" = "Stapler Missing";
"printer-state-reasons.stapler-motor-failure" = "Stapler Motor Failure";
"printer-state-reasons.stapler-near-limit" = "Stapler Near Limit";
"printer-state-reasons.stapler-offline" = "Stapler Offline";
"printer-state-reasons.stapler-opened" = "Stapler Opened";
"printer-state-reasons.stapler-over-temperature" = "Stapler Over Temperature";
"printer-state-reasons.stapler-power-saver" = "Stapler Power Saver";
"printer-state-reasons.stapler-recoverable-failure" = "Stapler Recoverable Failure";
"printer-state-reasons.stapler-recoverable-storage" = "Stapler Recoverable Storage";
"printer-state-reasons.stapler-removed" = "Stapler Removed";
"printer-state-reasons.stapler-resource-added" = "Stapler Resource Added";
"printer-state-reasons.stapler-resource-removed" = "Stapler Resource Removed";
"printer-state-reasons.stapler-thermistor-failure" = "Stapler Thermistor Failure";
"printer-state-reasons.stapler-timing-failure" = "Stapler Timing Failure";
"printer-state-reasons.stapler-turned-off" = "Stapler Turned Off";
"printer-state-reasons.stapler-turned-on" = "Stapler Turned On";
"printer-state-reasons.stapler-under-temperature" = "Stapler Under Temperature";
"printer-state-reasons.stapler-unrecoverable-failure" = "Stapler Unrecoverable Failure";
"printer-state-reasons.stapler-unrecoverable-storage-error" = "Stapler Unrecoverable Storage Error";
"printer-state-reasons.stapler-warming-up" = "Stapler Warming Up";
"printer-state-reasons.stitcher-added" = "Stitcher Added";
"printer-state-reasons.stitcher-almost-empty" = "Stitcher Almost Empty";
"printer-state-reasons.stitcher-almost-full" = "Stitcher Almost Full";
"printer-state-reasons.stitcher-at-limit" = "Stitcher At Limit";
"printer-state-reasons.stitcher-closed" = "Stitcher Closed";
"printer-state-reasons.stitcher-configuration-change" = "Stitcher Configuration Change";
"printer-state-reasons.stitcher-cover-closed" = "Stitcher Cover Closed";
"printer-state-reasons.stitcher-cover-open" = "Stitcher Cover Open";
"printer-state-reasons.stitcher-empty" = "Stitcher Empty";
"printer-state-reasons.stitcher-full" = "Stitcher Full";
"printer-state-reasons.stitcher-interlock-closed" = "Stitcher Interlock Closed";
"printer-state-reasons.stitcher-interlock-open" = "Stitcher Interlock Open";
"printer-state-reasons.stitcher-jam" = "Stitcher Jam";
"printer-state-reasons.stitcher-life-almost-over" = "Stitcher Life Almost Over";
"printer-state-reasons.stitcher-life-over" = "Stitcher Life Over";
"printer-state-reasons.stitcher-memory-exhausted" = "Stitcher Memory Exhausted";
"printer-state-reasons.stitcher-missing" = "Stitcher Missing";
"printer-state-reasons.stitcher-motor-failure" = "Stitcher Motor Failure";
"printer-state-reasons.stitcher-near-limit" = "Stitcher Near Limit";
"printer-state-reasons.stitcher-offline" = "Stitcher Offline";
"printer-state-reasons.stitcher-opened" = "Stitcher Opened";
"printer-state-reasons.stitcher-over-temperature" = "Stitcher Over Temperature";
"printer-state-reasons.stitcher-power-saver" = "Stitcher Power Saver";
"printer-state-reasons.stitcher-recoverable-failure" = "Stitcher Recoverable Failure";
"printer-state-reasons.stitcher-recoverable-storage" = "Stitcher Recoverable Storage";
"printer-state-reasons.stitcher-removed" = "Stitcher Removed";
"printer-state-reasons.stitcher-resource-added" = "Stitcher Resource Added";
"printer-state-reasons.stitcher-resource-removed" = "Stitcher Resource Removed";
"printer-state-reasons.stitcher-thermistor-failure" = "Stitcher Thermistor Failure";
"printer-state-reasons.stitcher-timing-failure" = "Stitcher Timing Failure";
"printer-state-reasons.stitcher-turned-off" = "Stitcher Turned Off";
"printer-state-reasons.stitcher-turned-on" = "Stitcher Turned On";
"printer-state-reasons.stitcher-under-temperature" = "Stitcher Under Temperature";
"printer-state-reasons.stitcher-unrecoverable-failure" = "Stitcher Unrecoverable Failure";
"printer-state-reasons.stitcher-unrecoverable-storage-error" = "Stitcher Unrecoverable Storage Error";
"printer-state-reasons.stitcher-warming-up" = "Stitcher Warming Up";
"printer-state-reasons.stopped-partly" = "Stopped Partly";
"printer-state-reasons.stopping" = "Stopping";
"printer-state-reasons.subunit-added" = "Subunit Added";
"printer-state-reasons.subunit-almost-empty" = "Subunit Almost Empty";
"printer-state-reasons.subunit-almost-full" = "Subunit Almost Full";
"printer-state-reasons.subunit-at-limit" = "Subunit At Limit";
"printer-state-reasons.subunit-closed" = "Subunit Closed";
"printer-state-reasons.subunit-empty" = "Subunit Empty";
"printer-state-reasons.subunit-full" = "Subunit Full";
"printer-state-reasons.subunit-life-almost-over" = "Subunit Life Almost Over";
"printer-state-reasons.subunit-life-over" = "Subunit Life Over";
"printer-state-reasons.subunit-memory-exhausted" = "Subunit Memory Exhausted";
"printer-state-reasons.subunit-missing" = "Subunit Missing";
"printer-state-reasons.subunit-motor-failure" = "Subunit Motor Failure";
"printer-state-reasons.subunit-near-limit" = "Subunit Near Limit";
"printer-state-reasons.subunit-offline" = "Subunit Offline";
"printer-state-reasons.subunit-opened" = "Subunit Opened";
"printer-state-reasons.subunit-over-temperature" = "Subunit Over Temperature";
"printer-state-reasons.subunit-power-saver" = "Subunit Power Saver";
"printer-state-reasons.subunit-recoverable-failure" = "Subunit Recoverable Failure";
"printer-state-reasons.subunit-recoverable-storage" = "Subunit Recoverable Storage";
"printer-state-reasons.subunit-removed" = "Subunit Removed";
"printer-state-reasons.subunit-resource-added" = "Subunit Resource Added";
"printer-state-reasons.subunit-resource-removed" = "Subunit Resource Removed";
"printer-state-reasons.subunit-thermistor-failure" = "Subunit Thermistor Failure";
"printer-state-reasons.subunit-timing-Failure" = "Subunit Timing Failure";
"printer-state-reasons.subunit-turned-off" = "Subunit Turned Off";
"printer-state-reasons.subunit-turned-on" = "Subunit Turned On";
"printer-state-reasons.subunit-under-temperature" = "Subunit Under Temperature";
"printer-state-reasons.subunit-unrecoverable-failure" = "Subunit Unrecoverable Failure";
"printer-state-reasons.subunit-unrecoverable-storage" = "Subunit Unrecoverable Storage";
"printer-state-reasons.subunit-warming-up" = "Subunit Warming Up";
"printer-state-reasons.timed-out" = "Timed Out";
"printer-state-reasons.toner-empty" = "Toner Empty";
"printer-state-reasons.toner-low" = "Toner Low";
"printer-state-reasons.trimmer-added" = "Trimmer Added";
"printer-state-reasons.trimmer-almost-empty" = "Trimmer Almost Empty";
"printer-state-reasons.trimmer-almost-full" = "Trimmer Almost Full";
"printer-state-reasons.trimmer-at-limit" = "Trimmer At Limit";
"printer-state-reasons.trimmer-closed" = "Trimmer Closed";
"printer-state-reasons.trimmer-configuration-change" = "Trimmer Configuration Change";
"printer-state-reasons.trimmer-cover-closed" = "Trimmer Cover Closed";
"printer-state-reasons.trimmer-cover-open" = "Trimmer Cover Open";
"printer-state-reasons.trimmer-empty" = "Trimmer Empty";
"printer-state-reasons.trimmer-full" = "Trimmer Full";
"printer-state-reasons.trimmer-interlock-closed" = "Trimmer Interlock Closed";
"printer-state-reasons.trimmer-interlock-open" = "Trimmer Interlock Open";
"printer-state-reasons.trimmer-jam" = "Trimmer Jam";
"printer-state-reasons.trimmer-life-almost-over" = "Trimmer Life Almost Over";
"printer-state-reasons.trimmer-life-over" = "Trimmer Life Over";
"printer-state-reasons.trimmer-memory-exhausted" = "Trimmer Memory Exhausted";
"printer-state-reasons.trimmer-missing" = "Trimmer Missing";
"printer-state-reasons.trimmer-motor-failure" = "Trimmer Motor Failure";
"printer-state-reasons.trimmer-near-limit" = "Trimmer Near Limit";
"printer-state-reasons.trimmer-offline" = "Trimmer Offline";
"printer-state-reasons.trimmer-opened" = "Trimmer Opened";
"printer-state-reasons.trimmer-over-temperature" = "Trimmer Over Temperature";
"printer-state-reasons.trimmer-power-saver" = "Trimmer Power Saver";
"printer-state-reasons.trimmer-recoverable-failure" = "Trimmer Recoverable Failure";
"printer-state-reasons.trimmer-recoverable-storage" = "Trimmer Recoverable Storage";
"printer-state-reasons.trimmer-removed" = "Trimmer Removed";
"printer-state-reasons.trimmer-resource-added" = "Trimmer Resource Added";
"printer-state-reasons.trimmer-resource-removed" = "Trimmer Resource Removed";
"printer-state-reasons.trimmer-thermistor-failure" = "Trimmer Thermistor Failure";
"printer-state-reasons.trimmer-timing-failure" = "Trimmer Timing Failure";
"printer-state-reasons.trimmer-turned-off" = "Trimmer Turned Off";
"printer-state-reasons.trimmer-turned-on" = "Trimmer Turned On";
"printer-state-reasons.trimmer-under-temperature" = "Trimmer Under Temperature";
"printer-state-reasons.trimmer-unrecoverable-failure" = "Trimmer Unrecoverable Failure";
"printer-state-reasons.trimmer-unrecoverable-storage-error" = "Trimmer Unrecoverable Storage Error";
"printer-state-reasons.trimmer-warming-up" = "Trimmer Warming Up";
"printer-state-reasons.unknown" = "Unknown";
"printer-state-reasons.wrapper-added" = "Wrapper Added";
"printer-state-reasons.wrapper-almost-empty" = "Wrapper Almost Empty";
"printer-state-reasons.wrapper-almost-full" = "Wrapper Almost Full";
"printer-state-reasons.wrapper-at-limit" = "Wrapper At Limit";
"printer-state-reasons.wrapper-closed" = "Wrapper Closed";
"printer-state-reasons.wrapper-configuration-change" = "Wrapper Configuration Change";
"printer-state-reasons.wrapper-cover-closed" = "Wrapper Cover Closed";
"printer-state-reasons.wrapper-cover-open" = "Wrapper Cover Open";
"printer-state-reasons.wrapper-empty" = "Wrapper Empty";
"printer-state-reasons.wrapper-full" = "Wrapper Full";
"printer-state-reasons.wrapper-interlock-closed" = "Wrapper Interlock Closed";
"printer-state-reasons.wrapper-interlock-open" = "Wrapper Interlock Open";
"printer-state-reasons.wrapper-jam" = "Wrapper Jam";
"printer-state-reasons.wrapper-life-almost-over" = "Wrapper Life Almost Over";
"printer-state-reasons.wrapper-life-over" = "Wrapper Life Over";
"printer-state-reasons.wrapper-memory-exhausted" = "Wrapper Memory Exhausted";
"printer-state-reasons.wrapper-missing" = "Wrapper Missing";
"printer-state-reasons.wrapper-motor-failure" = "Wrapper Motor Failure";
"printer-state-reasons.wrapper-near-limit" = "Wrapper Near Limit";
"printer-state-reasons.wrapper-offline" = "Wrapper Offline";
"printer-state-reasons.wrapper-opened" = "Wrapper Opened";
"printer-state-reasons.wrapper-over-temperature" = "Wrapper Over Temperature";
"printer-state-reasons.wrapper-power-saver" = "Wrapper Power Saver";
"printer-state-reasons.wrapper-recoverable-failure" = "Wrapper Recoverable Failure";
"printer-state-reasons.wrapper-recoverable-storage" = "Wrapper Recoverable Storage";
"printer-state-reasons.wrapper-removed" = "Wrapper Removed";
"printer-state-reasons.wrapper-resource-added" = "Wrapper Resource Added";
"printer-state-reasons.wrapper-resource-removed" = "Wrapper Resource Removed";
"printer-state-reasons.wrapper-thermistor-failure" = "Wrapper Thermistor Failure";
"printer-state-reasons.wrapper-timing-failure" = "Wrapper Timing Failure";
"printer-state-reasons.wrapper-turned-off" = "Wrapper Turned Off";
"printer-state-reasons.wrapper-turned-on" = "Wrapper Turned On";
"printer-state-reasons.wrapper-under-temperature" = "Wrapper Under Temperature";
"printer-state-reasons.wrapper-unrecoverable-failure" = "Wrapper Unrecoverable Failure";
"printer-state-reasons.wrapper-unrecoverable-storage-error" = "Wrapper Unrecoverable Storage Error";
"printer-state-reasons.wrapper-warming-up" = "Wrapper Warming Up";
"printer-state.3" = "Idle";
"printer-state.4" = "Processing";
"printer-state.5" = "Stopped";
"printer-up-time" = "Printer Uptime";
"proof-print" = "Proof Print";
"proof-print-copies" = "Proof Print Copies";
"punching" = "Punching";
"punching-locations" = "Punching Locations";
"punching-offset" = "Punching Offset";
"punching-reference-edge" = "Punch Edge";
"punching-reference-edge.bottom" = "Bottom";
"punching-reference-edge.left" = "Left";
"punching-reference-edge.right" = "Right";
"punching-reference-edge.top" = "Top";
"requested-attributes" = "Requested Attributes";
"retry-interval" = "Retry Interval";
"retry-time-out" = "Retry Timeout";
"save-disposition" = "Save Disposition";
"save-disposition.none" = "None";
"save-disposition.print-save" = "Print and Save";
"save-disposition.save-only" = "Save Only";
"save-document-format" = "Save Document Format";
"save-info" = "Save Info";
"save-location" = "Save Location";
"save-name" = "Save Name";
"separator-sheets" = "Separator Sheets";
"separator-sheets-type" = "Type of Separator Sheets";
"separator-sheets-type.both-sheets" = "Start and End Sheets";
"separator-sheets-type.end-sheet" = "End Sheet";
"separator-sheets-type.none" = "None";
"separator-sheets-type.slip-sheets" = "Slip Sheets";
"separator-sheets-type.start-sheet" = "Start Sheet";
"sheet-collate" = "Collate Copies";
"sheet-collate.collated" = "Yes";
"sheet-collate.uncollated" = "No";
"sides" = "2-Sided Printing";
"sides.one-sided" = "Off";
"sides.two-sided-long-edge" = "On (Portrait)";
"sides.two-sided-short-edge" = "On (Landscape)";
"status-message" = "Status Message";
"stitching" = "Staple";
"stitching-angle" = "Stitching Angle";
"stitching-locations" = "Stitching Locations";
"stitching-method" = "Staple Method";
"stitching-method.auto" = "Automatic";
"stitching-method.crimp" = "Crimp";
"stitching-method.wire" = "Wire";
"stitching-offset" = "Stitching Offset";
"stitching-reference-edge" = "Staple Edge";
"stitching-reference-edge.bottom" = "Bottom";
"stitching-reference-edge.left" = "Left";
"stitching-reference-edge.right" = "Right";
"stitching-reference-edge.top" = "Top";
"subject" = "Subject";
"t33-subaddress" = "T33 Subaddress";
"to-name" = "To Name";
"transmission-status" = "Transmission Status";
"transmission-status.3" = "Pending";
"transmission-status.4" = "Pending Retry";
"transmission-status.5" = "Processing";
"transmission-status.7" = "Canceled";
"transmission-status.8" = "Aborted";
"transmission-status.9" = "Completed";
"trimming" = "Cut";
"trimming-offset" = "Cut Position";
"trimming-reference-edge" = "Cut Edge";
"trimming-reference-edge.bottom" = "Bottom";
"trimming-reference-edge.left" = "Left";
"trimming-reference-edge.right" = "Right";
"trimming-reference-edge.top" = "Top";
"trimming-type" = "Type of Cut";
"trimming-type.draw-line" = "Draw Line";
"trimming-type.full" = "Full";
"trimming-type.partial" = "Partial";
"trimming-type.perforate" = "Perforate";
"trimming-type.score" = "Score";
"trimming-type.tab" = "Tab";
"trimming-when" = "Cut After";
"trimming-when.after-documents" = "Every Document";
"trimming-when.after-job" = "Job";
"trimming-when.after-sets" = "Every Set";
"trimming-when.after-sheets" = "Every Page";
"x-accuracy" = "X Accuracy";
"x-dimension" = "X Dimension";
"x-offset" = "X Offset";
"x-origin" = "X Origin";
"y-accuracy" = "Y Accuracy";
"y-dimension" = "Y Dimension";
"y-offset" = "Y Offset";
"y-origin" = "Y Origin";
"z-accuracy" = "Z Accuracy";
"z-dimension" = "Z Dimension";
"z-offset" = "Z Offset";