Jakub Jelinek [Thu, 28 Apr 2022 13:45:33 +0000 (15:45 +0200)]
cgraph: Don't verify semantic_interposition flag for aliases [PR105399]
The following testcase ICEs, because the ctors during cc1plus all have
!opt_for_fn (decl, flag_semantic_interposition) - they have NULL
DECL_FUNCTION_SPECIFIC_OPTIMIZATION (decl) and optimization_default_node
is for -Ofast and so has flag_semantic_interposition cleared.
During free lang data, we set DECL_FUNCTION_SPECIFIC_OPTIMIZATION (decl)
for the ctor which has body (or for thunks), but don't touch it for
aliases.
During lto1 optimization_default_node reflects the lto1 flags which
are -O2 rather than -Ofast and so has flag_semantic_interposition
set, for the ctor which has body that makes no difference, but as the
alias doesn't still have DECL_FUNCTION_SPECIFIC_OPTIMIZATION (decl) set,
we now trigger this verification check.
The following patch just doesn't verify it for aliases during lto1.
Another possibility would be to set DECL_FUNCTION_SPECIFIC_OPTIMIZATION (decl)
during free lang data even for aliases.
2022-04-28 Jakub Jelinek <jakub@redhat.com>
PR lto/105399
* cgraph.cc (cgraph_node::verify_node): Don't verify
semantic_interposition flag against
opt_for_fn (decl, flag_semantic_interposition) for aliases in lto1.
c++, coroutines: Improve check for throwing final await [PR104051].
We check that the final_suspend () method returns a sane type (i.e. a class
or structure) but, unfortunately, that check has to be later than the one
for a throwing case. If the use returns some nonsensical type from the
method, we need to handle that in the checking for noexcept.
c++, coroutines: Account for overloaded promise return_value() [PR105301].
Whether it was intended or not, it is possible to define a coroutine promise
with multiple return_value() methods [which need not even have the same type].
We were not accounting for this possibility in the check to see whether both
return_value and return_void are specifier (which is prohibited by the
standard). Fixed thus and provided an adjusted diagnostic for the case that
multiple return_value() methods are present.
c++, coroutines: Make sure our temporaries are in a bind expr [PR105287]
There are a few cases where we can generate a temporary that does not need
to be added to the coroutine frame (i.e. these are genuinely ephemeral). The
intent was that unnamed temporaries should not be 'promoted' to coroutine
frame entries. However there was a thinko and these were not actually ever
added to the bind expressions being generated for the expanded awaits. This
meant that they were showing in the global namspace, leading to an empty
DECL_CONTEXT and the ICE reported.
* coroutines.cc (maybe_promote_temps): Ensure generated temporaries
are added to the bind expr.
(add_var_to_bind): Fix local var naming to use portable punctuation.
(register_local_var_uses): Do not add synthetic names to unnamed
temporaries.
c++, coroutines: Avoid expanding within templates [PR103868]
This is a forward-port of a patch by Nathan (against 10.x) which fixes an open
PR.
We are ICEing because we ended up tsubst_copying something that had already
been tsubst, leading to an assert failure (mostly such repeated tsubsting is
harmless).
We had a non-dependent co_await in a non-dependent-type template fn, so we
processed it at definition time, and then reprocessed at instantiation time.
We fix this here by deferring substitution while processing templates.
Additional observations (for a better future fix, in the GCC13 timescale):
Exprs only have dependent type if at least one operand is dependent which was
what the current code was intending to do. Coroutines have the additional
wrinkle, that the current fn's type is an implicit operand.
So, if the coroutine function's type is not dependent, and the operand is not
dependent, we should determine the type of the co_await expression using the
DEPENDENT_EXPR wrapper machinery. That allows us to determine the
subexpression type, but leave its operand unchanged and then instantiate it
later.
PR c++/103868
gcc/cp/ChangeLog:
* coroutines.cc (finish_co_await_expr): Do not process non-dependent
coroutine expressions at template definition time.
(finish_co_yield_expr): Likewise.
(finish_co_return_stmt): Likewise.
Jonathan Wakely [Thu, 28 Apr 2022 12:06:31 +0000 (13:06 +0100)]
libstdc++: Fix error reporting in filesystem::copy [PR99290]
The recursive calls to filesystem::copy should stop if any of them
reports an error.
libstdc++-v3/ChangeLog:
PR libstdc++/99290
* src/c++17/fs_ops.cc (fs::copy): Pass error_code to
directory_iterator constructor, and check on each iteration.
* src/filesystem/ops.cc (fs::copy): Likewise.
* testsuite/27_io/filesystem/operations/copy.cc: Check for
errors during recursion.
* testsuite/experimental/filesystem/operations/copy.cc:
Likewise.
Jakub Jelinek [Thu, 28 Apr 2022 10:33:59 +0000 (12:33 +0200)]
i386: Fix up ix86_gimplify_va_arg [PR105331]
On the following testcase we emit a bogus
'va_arg_tmp.5' may be used uninitialized
warning. The reason is that when gimplifying the addr = &temp;
statement, the va_arg_tmp temporary var for which we emit ADDR_EXPR
is not TREE_ADDRESSABLE, prepare_gimple_addressable emits some extra
code to initialize the newly addressable var from its previous value,
but it is a new variable which hasn't been initialized yet and will
be later, so we end up initializing it with uninitialized SSA_NAME:
va_arg_tmp.6 = va_arg_tmp.5_14(D);
addr.2_16 = &va_arg_tmp.6;
_17 = MEM[(double *)sse_addr.4_13];
MEM[(double * {ref-all})addr.2_16] = _17;
and with -O1 we actually don't DSE it before the warning is emitted.
If we make the temp TREE_ADDRESSABLE before the gimplification, then
this prepare_gimple_addressable path isn't taken and we effectively
omit the first statement above and so the bogus warning is gone.
I went through other backends and didn't find another instance of this
problem.
2022-04-28 Jakub Jelinek <jakub@redhat.com>
PR target/105331
* config/i386/i386.cc (ix86_gimplify_va_arg): Mark va_arg_tmp
temporary TREE_ADDRESSABLE before trying to gimplify ADDR_EXPR
of it.
Richard Biener [Wed, 27 Apr 2022 12:06:12 +0000 (14:06 +0200)]
tree-optimization/105219 - bogus max iters for vectorized epilogue
The following makes sure to take into account prologue peeling
when trying to narrow down the maximum number of iterations
computed for the vectorized epilogue. A similar issue exists when
peeling for gaps.
2022-04-27 Richard Biener <rguenther@suse.de>
PR tree-optimization/105219
* tree-vect-loop.cc (vect_transform_loop): Disable
special code narrowing the vectorized epilogue max
iterations when peeling for alignment or gaps was in effect.
Kewen Lin [Thu, 28 Apr 2022 03:34:27 +0000 (22:34 -0500)]
testsuite: Add test case for pack/unpack bifs at soft-float [PR105334]
This patch is to add the test coverage for the two recent fixes
r12-8091 and r12-8226 from Segher, aix is skipped since it takes
soft-float and long-double-128 incompatible.
testsuite: Skip target not support -pthread [PR104676].
The "ftree-parallelize-loops=" imply -pthread option in gcc/gcc.cc,
some target are not support pthread like elf target use newlib,
and will get an error:
Marek Polacek [Tue, 26 Apr 2022 20:12:58 +0000 (16:12 -0400)]
c++: enum in generic lambda at global scope [PR105398]
We crash compiling this test since r11-7993 which changed
lookup_template_class_1 so that we only call tsubst_enum when
!uses_template_parms (current_nonlambda_scope ())
But here current_nonlambda_scope () is the global NAMESPACE_DECL ::, which
doesn't have a type, therefore is considered type-dependent. So we don't
call tsubst_enum, and crash in tsubst_copy/CONST_DECL because we didn't
find the e1 enumerator.
I don't think any namespace can depend on any template parameter, so
this patch tweaks uses_template_parms.
PR c++/105398
gcc/cp/ChangeLog:
* pt.cc (uses_template_parms): Return false for any NAMESPACE_DECL.
Jakub Jelinek [Wed, 27 Apr 2022 16:47:10 +0000 (18:47 +0200)]
testsuite: Add testcase for dangling pointer equality bogus warning [PR104492]
On Wed, Apr 27, 2022 at 12:02:33PM +0200, Richard Biener wrote:
> I did that but the reduction result did not resemble the same failure
> mode. I've failed to manually construct a testcase as well. Possibly
> a testcase using libstdc++ but less Qt internals might be possible.
Here is a testcase that I've managed to reduce, FAILs with:
FAIL: g++.dg/warn/pr104492.C -std=gnu++14 (test for bogus messages, line 111)
FAIL: g++.dg/warn/pr104492.C -std=gnu++17 (test for bogus messages, line 111)
FAIL: g++.dg/warn/pr104492.C -std=gnu++20 (test for bogus messages, line 111)
on both x86_64-linux and i686-linux without your commit and passes with it.
2022-04-27 Jakub Jelinek <jakub@redhat.com>
PR middle-end/104492
* g++.dg/warn/pr104492.C: New test.
Thomas Koenig [Wed, 27 Apr 2022 16:40:18 +0000 (18:40 +0200)]
Split test to remove failing run time test and add check for ICE.
gcc/testsuite/ChangeLog:
PR fortran/70673
PR fortran/78054
* gfortran.dg/pr70673.f90: Remove invalid statement.
* gfortran.dg/pr70673_2.f90: New test to check that
ICE does not re-appear.
The following patch updates baseline_symbols.txt on arches where I have
latest libstdc++ builds (my ws + Fedora package builds).
I've manually excluded:
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE14_M_extract_intB5cxx11IjEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE14_M_extract_intB5cxx11IlEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE14_M_extract_intB5cxx11ImEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE14_M_extract_intB5cxx11ItEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE14_M_extract_intB5cxx11IxEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE14_M_extract_intB5cxx11IyEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIwSt19istreambuf_iteratorIwSt11char_traitsIwEEE14_M_extract_intB5cxx11IjEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIwSt19istreambuf_iteratorIwSt11char_traitsIwEEE14_M_extract_intB5cxx11IlEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIwSt19istreambuf_iteratorIwSt11char_traitsIwEEE14_M_extract_intB5cxx11ImEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIwSt19istreambuf_iteratorIwSt11char_traitsIwEEE14_M_extract_intB5cxx11ItEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIwSt19istreambuf_iteratorIwSt11char_traitsIwEEE14_M_extract_intB5cxx11IxEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
+FUNC:_ZNKSt17__gnu_cxx_ieee1287num_getIwSt19istreambuf_iteratorIwSt11char_traitsIwEEE14_M_extract_intB5cxx11IyEES4_S4_S4_RSt8ios_baseRSt12_Ios_IostateRT_@@GLIBCXX_IEEE128_3.4.29
additions on ppc64le as those look unexpected.
Those symbols didn't show up in Fedora 11.3.1 build with recent glibc,
while other GLIBCXX_IEEE128_3.4.29 symbols are in 11.x already.
What this patch includes are only @@GLIBCXX_3.4.30 symbol additions, same
symbols on all files, except that powerpc64 adds also
_ZNSt17__gnu_cxx_ieee12816__convert_from_vERKP15__locale_structPciPKcz@@GLIBCXX_IEEE128_3.4.30
so everything included in the patch looks right to me.
Jonathan Wakely [Wed, 27 Apr 2022 13:29:34 +0000 (14:29 +0100)]
libstdc++: Add pretty printer for std::atomic
For the atomic specializations for shared_ptr and weak_ptr we can reuse
the existing SharedPointerPrinter, with a small tweak.
libstdc++-v3/ChangeLog:
* python/libstdcxx/v6/printers.py (SharedPointerPrinter): Add
support for atomic<shared_ptr<T>> and atomic<weak_ptr<T>>.
(StdAtomicPrinter): New printer.
(build_libstdcxx_dictionary): Register new printer.
* testsuite/libstdc++-prettyprinters/cxx11.cc: Test std::atomic.
* testsuite/libstdc++-prettyprinters/cxx20.cc: Test atomic smart
pointers.
Richard Biener [Mon, 25 Apr 2022 08:46:16 +0000 (10:46 +0200)]
middle-end/104492 - avoid all equality compare dangling pointer diags
The following extends the equality compare dangling pointer diagnostics
suppression for uses following free or realloc to also cover those
following invalidation of auto variables via CLOBBERs. That avoids
diagnosing idioms like
for auto candidates which are prone to forwarding of the final
comparison across the storage invalidation as then seen by the
late run access warning pass.
2022-04-25 Richard Biener <rguenther@suse.de>
PR middle-end/104492
* gimple-ssa-warn-access.cc
(pass_waccess::warn_invalid_pointer): Exclude equality compare
diagnostics for all kind of invalidations.
(pass_waccess::check_dangling_uses): Fix post-dominator query.
(pass_waccess::check_pointer_uses): Likewise.
This caused ICEs as the comparison of array spec supported only constant
explicit bounds, but dummy class variable descriptor types can have a
_data field with non-constant array spec bounds.
This change adds support for non-constant bounds. For that,
gfc_dep_compare_expr is used. It does probably more than strictly
necessary, but using it avoids rewriting a specific comparison function,
making mistakes and forgetting cases.
PR fortran/103662
PR fortran/105379
gcc/fortran/ChangeLog:
* array.cc (compare_bounds): Use bool as return type.
Support non-constant expressions.
(gfc_compare_array_spec): Update call to compare_bounds.
gcc/testsuite/ChangeLog:
* gfortran.dg/class_dummy_8.f90: New test.
* gfortran.dg/class_dummy_9.f90: New test.
Mikael Morin [Wed, 27 Apr 2022 09:36:00 +0000 (11:36 +0200)]
fortran: Avoid infinite self-recursion [PR105381]
Dummy array decls are local decls different from the argument decl
accessible through GFC_DECL_SAVED_DESCRIPTOR. If the argument decl has
a DECL_LANG_SPECIFIC set, it is copied over to the local decl at the
time the latter is created, so that the DECL_LANG_SPECIFIC object is
shared between local dummy decl and argument decl, and thus the
GFC_DECL_SAVED_DESCRIPTOR of the argument decl is the argument decl
itself.
The r12-8230-g7964ab6c364c410c34efe7ca2eba797d36525349 change introduced
the non_negative_strides_array_p predicate which recurses through
GFC_DECL_SAVED_DESCRIPTOR to avoid seeing dummy decls as purely local
decls. As the GFC_DECL_SAVED_DESCRIPTOR of the argument decl is itself,
this can cause infinite recursion.
This change adds a check to avoid infinite recursion.
PR fortran/102043
PR fortran/105381
gcc/fortran/ChangeLog:
* trans-array.cc (non_negative_strides_array_p): Inline variable
orig_decl and merge nested if conditions. Add condition to not
recurse if the next argument is the same as the current.
gcc/testsuite/ChangeLog:
* gfortran.dg/character_array_dummy_1.f90: New test.
The test is UNSUPPORTED with the first three ones (because of
-mcpu=cortex-a7), ignored with armv6s-m, and PASSes with all the other
ones, while it used crash without Jakub's fix (r12-8263), ie. FAIL
with options 5,6,7,8,10. The test passed without Jakub's fix with
option 9 because the problem happens only with an integer-only MVE.
Andreas Krebbel [Wed, 27 Apr 2022 07:20:41 +0000 (09:20 +0200)]
PR102024 - IBM Z: Add psabi diagnostics
For IBM Z in particular there is a problem with structs like:
struct A { float a; int :0; };
Our ABI document allows passing a struct in an FPR only if it has
exactly one member. On the other hand it says that structs of 1,2,4,8
bytes are passed in a GPR. So this struct is expected to be passed in
a GPR. Since we don't return structs in registers (regardless of the
number of members) it is always returned in memory.
Situation is as follows:
All compiler versions tested return it in memory - as expected.
gcc 11, gcc 12, g++ 12, and clang 13 pass it in a GPR - as expected.
g++ 11 as well as clang++ 13 pass in an FPR
For IBM Z we stick to the current GCC 12 behavior, i.e. zero-width
bitfields are NOT ignored. A struct as above will be passed in a
GPR. Rational behind this is that not affecting the C ABI is more
important here.
A patch for clang is in progress: https://reviews.llvm.org/D122388
In addition to the usual regression test I ran the compat and
struct-layout-1 testsuites comparing the compiler before and after the
patch.
gcc/testsuite/ChangeLog:
PR target/102024
* g++.target/s390/pr102024-1.C: New test.
* g++.target/s390/pr102024-2.C: New test.
* g++.target/s390/pr102024-3.C: New test.
* g++.target/s390/pr102024-4.C: New test.
* g++.target/s390/pr102024-5.C: New test.
* g++.target/s390/pr102024-6.C: New test.
Jakub Jelinek [Wed, 27 Apr 2022 06:34:18 +0000 (08:34 +0200)]
asan: Fix up asan_redzone_buffer::emit_redzone_byte [PR105396]
On the following testcase, we have in main's frame 3 variables,
some red zone padding, 4 byte d, followed by 12 bytes of red zone padding, then
8 byte b followed by 24 bytes of red zone padding, then 40 bytes c followed
by some red zone padding.
The intended content of shadow memory for that is (note, each byte describes
8 bytes of memory):
f1 f1 f1 f1 04 f2 00 f2 f2 f2 00 00 00 00 00 f3 f3 f3 f3 f3
left red d mr b middle r c right red zone
f1 is left red zone magic
f2 is middle red zone magic
f3 is right red zone magic
00 when all 8 bytes are accessible
01-07 when only 1 to 7 bytes are accessible followed by inaccessible bytes
The -fdump-rtl-expand-details dump makes it clear that it misbehaves:
Flushing rzbuffer at offset -160 with: f1 f1 f1 f1
Flushing rzbuffer at offset -128 with: 04 f2 00 00
Flushing rzbuffer at offset -128 with: 00 00 00 f2
Flushing rzbuffer at offset -96 with: f2 f2 00 00
Flushing rzbuffer at offset -64 with: 00 00 00 f3
Flushing rzbuffer at offset -32 with: f3 f3 f3 f3
In the end we end up with
f1 f1 f1 f1 00 00 00 f2 f2 f2 00 00 00 00 00 f3 f3 f3 f3 f3
shadow bytes because at offset -128 there are 2 overlapping stores
as asan_redzone_buffer::emit_redzone_byte has flushed the temporary 4 byte
buffer in the middle.
The function is called with an offset and value. If the passed offset is
consecutive with the prev_offset + buffer size (off == offset), then
we handle it correctly, similarly if the new offset is far enough from the
old one (we then flush whatever was in the buffer and if needed add up to 3
bytes of 00 before actually pushing value.
But what isn't handled correctly is when the offset isn't consecutive to
what has been added last time, but it is in the same 4 byte word of shadow
memory (32 bytes of actual memory), like the above case where
we have consecutive 04 f2 and then skip one shadow memory byte (aka 8 bytes
of real memory) and then want to emit f2. Emitting that as a store
of little-endian 0x0000f204 followed by a store of 0xf2000000 to the same
address doesn't work, we want to emit 0xf200f204.
The following patch does that by pushing 1 or 2 00 bytes.
Additionally, as a small cleanup, instead of using
m_shadow_bytes.safe_push (value);
flush_if_full ();
in all of if, else if and else bodies it sinks those 2 stmts to the end
of function as all do the same thing.
2022-04-27 Jakub Jelinek <jakub@redhat.com>
PR sanitizer/105396
* asan.cc (asan_redzone_buffer::emit_redzone_byte): Handle the case
where offset is bigger than off but smaller than m_prev_offset + 32
bits by pushing one or more 0 bytes. Sink the
m_shadow_bytes.safe_push (value); flush_if_full (); statements from
all cases to the end of the function.
Kewen Lin [Tue, 26 Apr 2022 11:34:24 +0000 (06:34 -0500)]
rs6000: Move V2DI vec_neg under power8-vector [PR105271]
As PR105271 shows, __builtin_altivec_neg_v2di requires option
-mpower8-vector as its pattern expansion relies on subv2di which
has guard VECTOR_UNIT_P8_VECTOR_P (V2DImode). This fix is to move
the related lines for __builtin_altivec_neg_v2di to the section
of stanza power8-vector.
PR target/105271
gcc/ChangeLog:
* config/rs6000/rs6000-builtins.def (NEG_V2DI): Move to [power8-vector]
stanza.
Jason Merrill [Tue, 26 Apr 2022 04:19:40 +0000 (00:19 -0400)]
c++: pack init-capture of unresolved overload [PR102629]
Here we were failing to diagnose that the initializer for the capture pack
is an unresolved overload. It turns out that the reason we didn't recognize
the deduction failure in do_auto_deduction was that the individual 'auto' in
the expansion of the capture pack was still marked as a parameter pack, so
we were deducing it to an empty pack instead of failing.
PR c++/102629
gcc/cp/ChangeLog:
* pt.cc (gen_elem_of_pack_expansion_instantiation): Clear
TEMPLATE_TYPE_PARAMETER_PACK on auto.
Patrick Palka [Tue, 26 Apr 2022 14:53:38 +0000 (10:53 -0400)]
c++: decltype of non-dependent call of class type [PR105386]
We need to pass tf_decltype when instantiating a non-dependent decltype
operand, like tsubst does in the dependent case, so that we don't force
completion of a prvalue operand's class type.
PR c++/105386
gcc/cp/ChangeLog:
* semantics.cc (finish_decltype_type): Pass tf_decltype to
instantiate_non_dependent_expr_sfinae.
Martin Liska [Tue, 26 Apr 2022 07:56:37 +0000 (09:56 +0200)]
lto: use diagnostics_context in print_lto_docs_link
Properly parse OPT_fdiagnostics_urls_ and then initialize both urls
and colors for global_dc. Doing that we would follow the configure
option --with-documentation-root-url, -fdiagnostics-urls is respected.
Plus we'll print colored warning and note messages.
libphobos: Don't call free on the TLS array in the emutls destroy function.
Fixes a segfault seen on Darwin when a GC scan is ran after a thread has
been destroyed. As the global emutlsArrays hash still has a reference
to the array itself, and tries to iterate all elements.
Setting the length to zero frees all allocated elements in the array,
and ensures that it is skipped when the _d_emutls_scan is called.
This DR was approved at the February 2022 plenary.
libstdc++-v3/ChangeLog:
* include/bits/shared_ptr_atomic.h (atomic<shared_ptr>): Add
constructor for constant initialization from nullptr_t.
* testsuite/20_util/shared_ptr/atomic/atomic_shared_ptr.cc:
Check for new constructor.
The following testcase regressed on riscv due to the splitting of critical
edges in the sink pass, similarly to x86_64 compared to GCC 11 we now swap
the edges, whether true or false edge goes to an empty forwarded bb.
From GIMPLE POV, those 2 forms are equivalent, but as can be seen here, for
some ifcvt opts it matters one way or another.
On this testcase, noce_try_store_flag_mask used to trigger and transformed
if (pseudo2) pseudo1 = 0;
into
pseudo1 &= -(pseudo2 == 0);
But with the swapped edges ifcvt actually sees
if (!pseudo2) pseudo3 = pseudo1; else pseudo3 = 0;
and noce_try_store_flag_mask punts. IMHO there is no reason why it
should punt those, it is equivalent to
pseudo3 = pseudo1 & -(pseudo2 == 0);
and especially if the target has 3 operand AND, it shouldn't be any more
costly (and even with 2 operand AND, it might very well happen that RA
can make it happen without any extra moves).
Initially I've just removed the rtx_equal_p calls from the conditions
and didn't add anything there, but that broke aarch64 bootstrap and
regressed some testcases on x86_64, where if_info->a or if_info->b could be
some larger expression that we can't force into a register.
Furthermore, the case where both if_info->a and if_info->b are constants is
better handled by other ifcvt optimizations like noce_try_store_flag
or noce_try_inverse_constants or noce_try_store_flag_constants.
So, I've restricted it to just a REG (perhaps SUBREG of REG might be ok too)
next to what has been handled previously.
2022-04-26 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/105314
* ifcvt.cc (noce_try_store_flag_mask): Don't require that the non-zero
operand is equal to if_info->x, instead use the non-zero operand
as one of the operands of AND with if_info->x as target.
Jakub Jelinek [Tue, 26 Apr 2022 07:57:34 +0000 (09:57 +0200)]
reassoc: Don't call fold_convert if !fold_convertible_p [PR105374]
As mentioned in the PR, we ICE because maybe_fold_*_comparisons returns
an expression with V4SImode type and we try to fold_convert it to
V4BImode, which isn't allowed.
IMHO no matter whether we change maybe_fold_*_comparisons we should
play safe on the reassoc side and punt if we can't convert like
we punt for many other reasons. This fixes the testcase on ARM.
Testcase not included, not exactly sure where and what directives it
should have in gcc.target/arm/ testsuite. Christophe, do you think you
could handle that incrementally?
2022-04-26 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/105374
* tree-ssa-reassoc.cc (eliminate_redundant_comparison): Punt if
!fold_convertible_p rather than assuming fold_convert must succeed.
Jakub Jelinek [Tue, 26 Apr 2022 07:52:22 +0000 (09:52 +0200)]
testsuite: Fix up g++.target/i386/vec-tmpl1.C testcase [PR65211]
This test fails on i686-linux:
Excess errors:
.../gcc/testsuite/g++.target/i386/vec-tmpl1.C:13:27: warning: SSE vector return without SSE enabled changes the ABI [-Wpsabi]
2022-04-26 Jakub Jelinek <jakub@redhat.com>
PR c++/65211
* g++.target/i386/vec-tmpl1.C: Add -Wno-psabi as
dg-additional-options.
Jakub Jelinek [Tue, 26 Apr 2022 07:40:03 +0000 (09:40 +0200)]
i386: Fix up ICE with -mveclibabi={acml,svml} [PR105367]
The following testcase ICEs, because conversion between scalar float types
which have the same mode are useless in GIMPLE, but for mathfn_built_in the
exact type matters (it treats say double and _Float64 or float and _Float32
differently, using different suffixes and for the _Float* sometimes
returning NULL when float/double do have a builtin).
In ix86_veclibabi_{svml,acml} we are using mathfn_built_in just so that
we don't have to translate the combined_fn and SFmode vs. DFmode into
strings ourselfs, and we already earlier punt on anything but SFmode and
DFmode. So, this patch just uses the double or float types depending
on the modes, rather than the types we actually got and which might be
_Float64 or _Float32 etc.
2022-04-26 Jakub Jelinek <jakub@redhat.com>
PR target/105367
* config/i386/i386.cc (ix86_veclibabi_svml, ix86_veclibabi_acml): Pass
el_mode == DFmode ? double_type_node : float_type_node instead of
TREE_TYPE (type_in) as first arguments to mathfn_built_in.
On Mon, Apr 25, 2022 at 01:38:25PM +0200, Mikael Morin wrote:
> I have just pushed the attached fix for two UNRESOLVED checks at -O0 that I
> hadn’t seen.
I don't like forcing of DSE in -O0 compilation, wouldn't it be better
to just not check the dse dump at -O0 like in the following patch?
Even better would be to check that the z._data = stores are both present
in *.optimized dump, but that doesn't really work at -O2 or above because
we inline the functions and optimize it completely away (both the stores
and corresponding reads).
The first hunk is needed so that __OPTIMIZE__ effective target works in
Fortran testsuite, otherwise one gets a pedantic error and __OPTIMIZE__
is considered not to match at all.
2022-04-26 Jakub Jelinek <jakub@redhat.com>
PR fortran/103662
* lib/target-supports.exp (check_effective_target___OPTIMIZE__): Add
a var definition to avoid pedwarn about empty translation unit.
* gfortran.dg/unlimited_polymorphic_3.f03: Remove -ftree-dse from
dg-additional-options, guard scan-tree-dump-not directives on
__OPTIMIZE__ target.
Jakub Jelinek [Tue, 26 Apr 2022 06:57:17 +0000 (08:57 +0200)]
libgomp: Fix up two non-GOMP_USE_ALIGNED_WORK_SHARES related issues [PR105358]
Last fall I've changed struct gomp_work_share, so that it doesn't have
__attribute__((aligned (64))) lock member in the middle unless the target has
non-emulated aligned allocator, otherwise it just makes sure the first and
second halves are 64 bytes appart for cache line reasons, but doesn't make
the struct 64-byte aligned itself and so we can use normal allocators for it.
When the struct isn't 64-byte aligned, the amount of tail padding significantly
decreases, to 0 or 4 bytes or so. The library uses that tail padding when
the ordered_teams_ids array (array of uints) and/or the memory for lastprivate
conditional temporaries (the latter wants to guarantee long long alignment).
The problem with it on ia32 darwin9 is that while the struct contains
long long members, long long is just 4 byte aligned while __alignof__(long long)
is 8. That causes problems in gomp_init_work_share, where we currently rely on
if offsetof (struct gomp_work_share, inline_ordered_team_ids) is long long
aligned, then that tail array will be aligned at runtime and so no extra
memory for dynamic realignment will be needed (that is false when the whole
struct doesn't have long long alignment). And also in the remaining hunks
causes another problem, where we compute INLINE_ORDERED_TEAM_IDS_OFF
as the above offsetof aligned up to long long boundary and subtract
sizeof (struct gomp_work_share) and INLINE_ORDERED_TEAM_IDS_OFF.
When unlucky, the former isn't multiple of 8 and the latter is 4 bigger
than that and as the subtraction is done in size_t, we end up with (size_t) -4,
so the comparison doesn't really work.
The fixes add additional conditions to make it work properly, but all of them
should be evaluated at compile time when optimizing and so shouldn't slow
anything.
2022-04-26 Jakub Jelinek <jakub@redhat.com>
PR libgomp/105358
* work.c (gomp_init_work_share): Don't mask of adjustment for
dynamic long long realignment if struct gomp_work_share has smaller
alignof than long long.
* loop.c (GOMP_loop_start): Don't use inline_ordered_team_ids if
struct gomp_work_share has smaller alignof than long long or if
sizeof (struct gomp_work_share) is smaller than
INLINE_ORDERED_TEAM_IDS_OFF.
* loop_ull.c (GOMP_loop_ull_start): Likewise.
* sections.c (GOMP_sections2_start): Likewise.
Jason Merrill [Thu, 21 Apr 2022 21:24:07 +0000 (17:24 -0400)]
c++: generic lambda fn parm pack [PR104624]
Parameter packs from the enclosing context can be used unexpanded in a
lambda that is itself part of a pack expansion, but not packs that are part
of the lambda itself. We already check for capture packs; we also need to
check for function parameter packs of the lambda call operator.
PR c++/104624
gcc/cp/ChangeLog:
* pt.cc (check_for_bare_parameter_packs): Check for lambda
function parameter pack.
gcc/testsuite/ChangeLog:
* g++.dg/cpp1y/lambda-generic-variadic22.C: New test.
Patrick Palka [Tue, 26 Apr 2022 01:49:00 +0000 (21:49 -0400)]
c++: ICE with requires-expr and -Wsequence-point [PR105304]
Here we're crashing from verify_sequence_points for this requires-expr
condition because it contains a templated CAST_EXPR with empty operand,
and verify_tree doesn't ignore this empty operand only because the
manual tail recursion that it performs for unary expression trees skips
the NULL test.
PR c++/105304
gcc/c-family/ChangeLog:
* c-common.cc (verify_tree) [restart]: Move up to before the
NULL test.
Patrick Palka [Tue, 26 Apr 2022 01:46:56 +0000 (21:46 -0400)]
c++: partial ordering with dependent NTTP type [PR105289]
Here ever since r11-6483-ge2e2f3f2c9400f we're rejecting and crashing
on (respectively) two testcases that we used to accept in C++17 mode
since r8-1437-g3da557ec145823. Both testcases declare a partial
specialization of a primary template that has an NTTP with dependent
type, and the validity of these partial specializations is unclear and
the subject of PR86193 / CWG 455.
So for now, this minimal patch just aims to fix the crash in the second
testcase. During deduction, when checking whether the type of an NTTP
uses still-undeduced parameters, we were incorrectly substituting into
the previously substituted type instead of into its original type.
In passing this patch also downgrades the "not more specialized"
diagnostic from a permerror to a pedwarn.
PR c++/105289
PR c++/86193
gcc/cp/ChangeLog:
* pt.cc (process_partial_specialization): Downgrade "partial
specialization isn't more specialized" diagnostic from permerror
to an on-by-default pedwarn.
(unify) <case TEMPLATE_PARM_INDEX>: When substituting into the
NTTP type a second time, use the original type not the
substituted type.
gcc/testsuite/ChangeLog:
* g++.dg/template/partial-specialization11.C: New test.
* g++.dg/template/partial-specialization12.C: New test.
David Malcolm [Mon, 25 Apr 2022 23:34:33 +0000 (19:34 -0400)]
gimple-fold: fix further missing stmt locations [PR104308]
PR analyzer/104308 initially reported about a
-Wanalyzer-use-of-uninitialized-value diagnostic using UNKNOWN_LOCATION
when complaining about certain memmove operations where the source
is uninitialized.
In r12-7856-g875342766d4298 I fixed the missing location for
a stmt generated by gimple_fold_builtin_memory_op, but the reporter
then found another way to generate such a stmt with UNKNOWN_LOCATION.
I've now gone through gimple_fold_builtin_memory_op looking at all
statement creation, and found three places in which a new statement
doesn't have a location set on it (either directly via
gimple_set_location, or indirectly via gsi_replace), one of which is
the new reproducer.
This patch adds a gimple_set_location to these three cases, and adds
test coverage for one of them (the third hunk within the patch), fixing
the new reproducer for PR analyzer/104308.
gcc/ChangeLog:
PR analyzer/104308
* gimple-fold.cc (gimple_fold_builtin_memory_op): Explicitly set
the location of new_stmt in all places that don't already set it,
whether explicitly, or via a call to gsi_replace.
gcc/testsuite/ChangeLog:
PR analyzer/104308
* gcc.dg/analyzer/pr104308.c: Add test coverage.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
Jakub Jelinek [Wed, 20 Apr 2022 17:06:17 +0000 (19:06 +0200)]
fortran: Fix up gfc_trans_oacc_construct [PR104717]
So that move_sese_region_to_fn works properly, OpenMP/OpenACC constructs
for which that function is invoked need an extra artificial BIND_EXPR
around their body so that we move all variables of the bodies.
The C/C++ FEs do that both for OpenMP constructs like OMP_PARALLEL, OMP_TASK
or OMP_TARGET and for OpenACC constructs that behave similarly to
OMP_TARGET, but the Fortran FE only does that for OpenMP constructs.
The following patch does that for OpenACC constructs too.
PR fortran/104717
gcc/fortran/
* trans-openmp.cc (gfc_trans_oacc_construct): Wrap construct body
in an extra BIND_EXPR.
gcc/testsuite/
* gfortran.dg/goacc/pr104717.f90: New test.
* gfortran.dg/goacc/privatization-1-compute-loop.f90: Adjust.
libgomp/
* testsuite/libgomp.oacc-fortran/privatized-ref-2.f90: Adjust.
Co-authored-by: Thomas Schwinge <thomas@codesourcery.com>
Jonathan Wakely [Mon, 25 Apr 2022 13:24:48 +0000 (14:24 +0100)]
libstdc++: Implement constexpr std::unique_ptr for C++23 (P2273R3)
libstdc++-v3/ChangeLog:
* include/bits/ptr_traits.h (__cpp_lib_constexpr_memory): Define
conditionally.
* include/bits/unique_ptr.h (__cpp_lib_constexpr_memory):
Define for C++23.
(default_delete, default_delete<T[]>, __uniq_ptr_impl)
(unique_ptr, unique_ptr<T[], D>): Add constexpr to all member
functions.
* include/std/version (__cpp_lib_constexpr_memory): Define new
value for C++23.
* testsuite/20_util/unique_ptr/assign/constexpr.cc: New test.
* testsuite/20_util/unique_ptr/comparison/constexpr.cc: New test.
* testsuite/20_util/unique_ptr/cons/constexpr_c++20.cc: New test.
* testsuite/20_util/unique_ptr/creation/constexpr.cc: New test.
* testsuite/20_util/unique_ptr/modifiers/constexpr.cc: New test.
* testsuite/20_util/unique_ptr/specialized_algorithms/constexpr.cc:
New test.
Marek Polacek [Fri, 22 Apr 2022 23:40:27 +0000 (19:40 -0400)]
c++: __builtin_shufflevector with value-dep expr [PR105353]
Here we issue an error from c_build_shufflevector while parsing a template
because it got a TEMPLATE_PARM_INDEX, but this function expects INTEGER_CSTs
(except the first two arguments). It checks if any of the arguments are
type-dependent, if so, we leave the processing for later, but it should
also check value-dependency for the 3rd+ arguments, so as to avoid the
problem above.
This is not a regression -- __builtin_shufflevector was introduced in
GCC 12, but it looks safe enough.
PR c++/105353
gcc/cp/ChangeLog:
* typeck.cc (build_x_shufflevector): Use
instantiation_dependent_expression_p except for the first two
arguments.
Paul A. Clarke [Mon, 11 Apr 2022 16:18:28 +0000 (11:18 -0500)]
docs: Fix 'modff' reference in extend.texi
In commit a2a919aa501e3 (2003), built-ins for modf and modff were added.
In extend.texi, section "Other Builtins", "modf" was added to the paragraph
"There are also built-in versions of the ISO C99 functions [...]" and
"modf" was also added to the paragraph "The ISO C90 functions [...]".
"modff" was not added to either paragraph.
Based on the context clues about where "modfl" and other similar function
pairs like "powf/powl" appear, I believe the reference to "modf" in the
first paragraph (C99) should instead be "modff".
2022-04-25 Paul A. Clarke <pc@us.ibm.com>
gcc
* doc/extend.texi (Other Builtins): Correct reference to 'modff'.
Andrew MacLeod [Mon, 25 Apr 2022 13:56:35 +0000 (09:56 -0400)]
Retain existing range knowledge when prefilling statements.
When range_of_stmt was adjusted to avoid large recursion depth, we need to
intersect the calculated range whth the any known range to avoid losing
info. Range_of_stmt does this, but the new prefill code missed it.
PR tree-optimization/105276
gcc/
* gimple-range.cc (gimple_ranger::prefill_stmt_dependencies): Include
existing global range with calculated value.
Philipp Fent [Mon, 25 Apr 2022 12:03:31 +0000 (13:03 +0100)]
libstdc++: Add pretty printer for std::initializer_list
Re-using the std::span printer, this now shows the contents of the
initializer list instead of the pointer and length members.
Signed-off-by: Philipp Fent <fent@in.tum.de>
libstdc++-v3/ChangeLog:
* python/libstdcxx/v6/printers.py (StdSpanPrinter._iterator):
Rename as iterator.
(StdInitializerListPrinter): Define new printer.
(build_libstdcxx_dictionary): Register new printer.
* testsuite/libstdc++-prettyprinters/cxx11.cc: Check printer for
initializer_list.
Mikael Morin [Mon, 25 Apr 2022 11:14:20 +0000 (13:14 +0200)]
testsuite: add additional option to force DSE execution [PR103662]
This fixes a dump tree match check that is UNRESOLVED with the -O0
optimization option, as the optimization pass corresponding to the
dump file is not run at -O0, and the dump is not generated.
PR fortran/103662
gcc/testsuite/ChangeLog:
* gfortran.dg/unlimited_polymorphic_3.f03: Force execution of
the DSE optimization pass.
Richard Biener [Fri, 1 Apr 2022 09:30:00 +0000 (11:30 +0200)]
tree-optimization/100810 - avoid undefs in IVOPT rewrites
The following attempts to avoid IVOPTs rewriting uses using
IV candidates that involve undefined behavior by using uninitialized
SSA names. First we restrict the set of candidates we produce
for such IVs to the original ones and mark them as not important.
Second we try to only allow expressing uses with such IV if they
originally use them. That is to avoid rewriting all such uses
in terms of other IVs. Since cand->iv and use->iv seem to never
exactly match up we resort to comparing the IV bases.
The approach ends up similar to the one posted by Roger at
https://gcc.gnu.org/pipermail/gcc-patches/2021-August/578441.html
but it marks IV candidates rather than use groups and the cases
we allow in determine_group_iv_cost_generic are slightly different.
2022-01-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/100810
* tree-ssa-loop-ivopts.cc (struct iv_cand): Add involves_undefs flag.
(find_ssa_undef): New function.
(add_candidate_1): Avoid adding derived candidates with
undefined SSA names and mark the original ones.
(determine_group_iv_cost_generic): Reject rewriting
uses with a different IV when that involves undefined SSA names.
* gcc.dg/torture/pr100810.c: New testcase.
* gcc.dg/torture/pr105337.c: Likewise.
Steve Kargl [Mon, 25 Apr 2022 07:23:56 +0000 (09:23 +0200)]
target/89125 - BSD and math functions
Back story: When GCC is configured and built on non-glibc platforms,
it seems very little to no effort is made to enumerate the available
C99 libm functions. It is all or nothing for C99 libm. The patch
introduces a new function, used on only FreeBSD, to inform gcc that
it has C99 libm functions (minus a few which clearly GCC does not check
nor test).
2022-04-15 Steven G. Kargl <kargl@gcc.gnu.org>
PR target/89125
* config/freebsd.h: Define TARGET_LIBC_HAS_FUNCTION to be
bsd_libc_has_function.
* targhooks.cc (bsd_libc_has_function): New function.
Expand the supported math functions to inclue C99 libm.
* targhooks.h (bsd_libc_has_function): New Prototype.
Richard Biener [Thu, 14 Apr 2022 12:06:22 +0000 (14:06 +0200)]
rtl-optimization/105231 - distribute_notes and REG_EH_REGION
The following mitigates a problem in combine distribute_notes which
places an original REG_EH_REGION based on only may_trap_p which is
good to test whether a non-call insn can possibly throw but not if
actually it does or we care. That's something we decided at RTL
expansion time where we possibly still know the insn evaluates
to a constant.
In fact, the REG_EH_REGION note with lp > 0 can only come from the
original i3 and an assert is added to that effect. That means we only
need to retain the note on i3 or, if that cannot trap, drop it but we
should never move it to i2.
The following places constraints on the insns to combine with
non-call exceptions since we cannot handle the case where we
have more than one EH side-effect in the IL. The patch also
makes sure we can accumulate that on i3 and do not split
a possible exception raising part of it to i2. As a special
case we do not place any restriction on all externally
throwing insns when there is no REG_EH_REGION present.
2022-04-22 Richard Biener <rguenther@suse.de>
PR rtl-optimization/105231
* combine.cc (distribute_notes): Assert that a REG_EH_REGION
with landing pad > 0 is from i3. Put any REG_EH_REGION note
on i3 or drop it if the insn can not trap.
(try_combine): Ensure that we can merge REG_EH_REGION notes
with non-call exceptions. Ensure we are not splitting a
trapping part of an insn with non-call exceptions when there
is any REG_EH_REGION note to preserve.
This fixes a type-based alias analysis issue with unlimited polymorphic
class descriptors (types behind class(*)) causing data initialisation to
be removed by optimization.
The fortran front-end may create multiple declarations for types, for
example if a type is redeclared in each program unit it is used in.
To avoid optimization seeing them as non-aliasing, a list of derived
types is created at resolution time, and used at translation to set
the same TYPE_CANONICAL type for each duplicate type declaration.
This mechanism didn’t work for unlimited polymorphic descriptors types,
as there is a short-circuit return skipping all the resolution handling
for them, including the type registration.
This change adds type registration at the short-circuit return, and
updates type comparison to handle specifically unlimited polymorphic
fake symbols, class descriptor types and virtual table types.
The test, which exhibited mismatching dynamic types had to be fixed as
well.
PR fortran/103662
gcc/fortran/ChangeLog:
* interface.cc (gfc_compare_derived_types): Support comparing
unlimited polymorphic fake symbols. Recursively compare class
descriptor types and virtual table types.
* resolve.cc (resolve_fl_derived): Add type to the types list
on unlimited polymorphic short-circuit return.
gcc/testsuite/ChangeLog:
* gfortran.dg/unlimited_polymorphic_3.f03 (foo): Separate
bind(c) and sequence checks to...
(foo_bc, foo_sq): ... two different procedures.
(main, foo*): Change type declarations so that type name,
component name, and either bind(c) or sequence attribute match
between the main type declarations and the procedure type
declarations.
(toplevel): Add optimization dump checks.
Jakub Jelinek [Sat, 23 Apr 2022 08:25:31 +0000 (10:25 +0200)]
i386: Improve ix86_expand_int_movcc [PR105338]
The following testcase regressed on x86_64 on the trunk, due to some GIMPLE
pass changes (r12-7687) we end up an *.optimized dump difference of:
@@ -8,14 +8,14 @@ int foo (int i)
}
and similarly for the other functions. That is functionally equivalent and
there is no canonical form for those. The reason for i_2(D) in the PHI
argument as opposed to 0 is the uncprop pass, that is in many cases
beneficial for expansion as we don't need to load the value into some pseudo
in one of the if blocks.
Now, for the 11.x ordering we have the pseudo = i insn in the extended basic
block (it comes first) and so forwprop1 undoes what uncprop does by
propagating constant 0 there. But for the 12.x ordering, the extended basic
block contains pseudo = 5 and pseudo = i is in the other bb and so fwprop1
doesn't change it.
During the ce1 pass, we attempt to emit a conditional move and we have very
nice code for the cases where both last operands of ?: are constant, and yet
another for !TARGET_CMOVE if at least one of them is.
The following patch will undo the uncprop behavior during
ix86_expand_int_movcc, but just for those spots that can benefit from both
or at least one operands being constant, leaving the pure cmov case as is
(because then it is useful not to have to load a constant into a pseudo
as it already is in one). We can do that in the
op0 == op1 ? op0 : op3
or
op0 != op1 ? op2 : op0
cases if op1 is a CONST_INT by pretending it is
op0 == op1 ? op1 : op3
or
op0 != op1 ? op2 : op1
2022-04-23 Jakub Jelinek <jakub@redhat.com>
PR target/105338
* config/i386/i386-expand.cc (ix86_expand_int_movcc): Handle
op0 == cst1 ? op0 : op3 like op0 == cst1 ? cst1 : op3 for the non-cmov
cases.
Thomas W Rodgers [Fri, 22 Apr 2022 22:46:19 +0000 (15:46 -0700)]
libstdc++: Make atomic notify_one and notify_all non-const
<recording this here for future reference>
PR102994 "atomics: std::atomic<ptr>::wait is not marked const" raises the
issue that the current libstdc++ implementation marks the notify members
const, the implementation strategy used by libstdc++, as well as libc++
and the Microsoft STL, do not require the atomic to be mutable (it is hard
to conceive of a desirable implementation approach that would require it).
The original paper proposing the wait/notify functionality for atomics
(p1185) also had these members marked const for the first three revisions,
but that was changed without explanation in r3 and subsequent revisions of
the paper.
After raising the issue to the authors of p1185 and the author of the
libc++ implementation, the consensus seems to be "meh, it's harmless" so
there seems little appetite for an LWG issue to revisit the subject.
This patch changes the libstdc++ implementation to be in agreement with
the standard by removing const from those notify_one/notify_all members.
libstdc++-v3/ChangeLog:
PR libstdc++/102994
* include/bits/atomic_base.h (atomic_flag::notify_one,
notify_all): Remove const qualification.
(__atomic_base::notify_one, notify_all): Likewise.
* include/std/atomic (atomic<bool>::notify_one, notify_all):
Likewise.
(atomic::notify_one, notify_all): Likewise.
(atomic<T*>::notify_one, notify_all): Likewise.
(atomic_notify_one, atomic_notify_all): Likewise.
* testsuite/29_atomics/atomic/wait_notify/102994.cc: Adjust test
to account for change in notify_one/notify_all signature.
Mikael Morin [Fri, 22 Apr 2022 20:52:50 +0000 (22:52 +0200)]
fortran: Use pointer arithmetic to index arrays [PR102043]
The code generated for array references used to be ARRAY_REF trees as
could be expected. However, the middle-end may conclude from those
trees that the indexes used are non-negative (more precisely not below
the lower bound), which is a wrong assumption in the case of "reversed-
order" arrays.
The problematic arrays are those with a descriptor and having a negative
stride for at least one dimension. The descriptor data points to the
first element in array order (which is not the first in memory order in
that case), and the negative stride(s) makes walking the array backwards
(towards lower memory addresses), and we can access elements with
negative index wrt data pointer.
With this change, pointer arithmetic is generated by default for array
references, unless we are in a case where negative indexes can’t happen
(array descriptor’s dim element, substrings, explicit shape,
allocatable, or assumed shape contiguous). A new flag is added to
choose between array indexing and pointer arithmetic, and it’s set
if the context can tell array indexing is safe (descriptor dim
element, substring, temporary array), or a new method is called
to decide on whether the flag should be set for one given array
expression.
PR fortran/102043
gcc/fortran/ChangeLog:
* trans.h (gfc_build_array_ref): Add non_negative_offset
argument.
* trans.cc (gfc_build_array_ref): Ditto. Use pointer arithmetic
if non_negative_offset is false.
* trans-expr.cc (gfc_conv_substring): Set flag in the call to
gfc_build_array_ref.
* trans-array.cc (gfc_get_cfi_dim_item,
gfc_conv_descriptor_dimension): Same.
(build_array_ref): Decide on whether to set the flag and update
the call.
(gfc_conv_scalarized_array_ref): Same. New argument tmp_array.
(gfc_conv_tmp_array_ref): Update call to
gfc_conv_scalarized_ref.
(non_negative_strides_array_p): New function.
Mikael Morin [Fri, 22 Apr 2022 20:52:38 +0000 (22:52 +0200)]
fortran: Generate an array temporary reference [PR102043]
This avoids regressing on char_cast_1.f90 and char_cast_2.f90 later in
the patch series when the code generation for array references is
changed to use pointer arithmetic.
The regressing testcases match part of an array reference in the
generated tree dump and it’s not clear how the pattern should be
rewritten to match the equivalent with pointer arithmetic.
This change uses a method specific to array temporaries to generate
array-references, so that these array references are flagged as safe
for array indexing and will not be updated to use pointer arithmetic.
PR fortran/102043
gcc/fortran/ChangeLog:
* trans-array.cc (gfc_conv_expr_descriptor): Use
gfc_conv_tmp_array_ref.
Mikael Morin [Fri, 22 Apr 2022 20:52:26 +0000 (22:52 +0200)]
fortran: Update index extraction code. [PR102043]
This avoids a regression on hollerith4.f90 and hollerith6.f90 later in
the patch series when code generation for array references is changed
to use pointer arithmetic.
The problem comes from the extraction of the array index from an
ARRAY_REF tree, which doesn’t work if the tree is not an ARRAY_REF
any more.
This updates the code generated for remaining size evaluation to work
with a source tree that uses either array indexing or pointer
arithmetic.
PR fortran/102043
gcc/fortran/ChangeLog:
* trans-io.cc: Add handling for the case where the array
is referenced using pointer arithmetic.
Mikael Morin [Fri, 22 Apr 2022 20:52:12 +0000 (22:52 +0200)]
fortran: Pre-evaluate string pointers. [PR102043]
This avoids a regression on deferred_character_23.f90 later in the
patch series when array references are rewritten to use pointer
arithmetic.
The problem is a SAVE_EXPR tree as TYPE_SIZE_UNIT of one array element
type, which is used by the pointer arithmetic expressions. As these
expressions appear in both branches of an if-then-else block, the tree
is lowered to a variable in one of the branches but it’s used in both
branches, which is invalid middle-end code.
This change pre-evaluates the array references or pointer arithmetics
to variables before the if-then-else block, so that the SAVE_EXPR are
expanded to variables in the parent scope of the if-then-else block,
and expressions referencing the variables remain valid in both
branches.
PR fortran/102043
gcc/fortran/ChangeLog:
* trans-expr.cc: Pre-evaluate src and dest to variables
before using them.
For PR103623 I fixed unpack, but pack is broken as well, as reported in
PR105334. Fixing that is a bit more code, but it is pretty simple code
nonetheless.
PR target/105334
* config/rs6000/rs6000.md (pack<mode> for FMOVE128): New expander.
(pack<mode> for FMOVE128): Rename and split the insn_and_split to...
(pack<mode>_hard for FMOVE128): ... this...
(pack<mode>_soft for FMOVE128): ... and this.
Jakub Jelinek [Fri, 22 Apr 2022 11:38:11 +0000 (13:38 +0200)]
rtlanal: Fix up replace_rtx [PR105333]
The following testcase FAILs, because replace_rtx replaces a REG with
CONST_WIDE_INT inside of a SUBREG, which is an invalid transformation
because a SUBREG relies on SUBREG_REG having non-VOIDmode but
CONST_WIDE_INT has VOIDmode.
replace_rtx already has code to deal with it, but it was doing
it only for CONST_INTs. The following patch does it also for
VOIDmode CONST_DOUBLE or CONST_WIDE_INT.
2022-04-22 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/105333
* rtlanal.cc (replace_rtx): Use simplify_subreg or
simplify_unary_operation if CONST_SCALAR_INT_P rather than just
CONST_INT_P.
This testcase does not generate anywhere near optimal code for 32-bit
code. For p10 it actually now fails this testcase, after the previous
patch. Let's xfail it.
RA now chooses GEN_OR_VSX_REGS in most cases. This is great in most
cases, but we often (or always?) use {l,st}{f,xs}iwzx now, which is
problematic because the integer load and store insns can use cheaper
addressing modes. We can fix that by putting a small penalty on the
instruction alternatives for those.
- Import dmd v2.100.0-beta.1.
- Print deprecation messages for scope violations unless
`-frevert=dip1000' is used.
- Fixed a missed case of switch case fallthrough not being caught by
the compiler.
D runtime changes:
- Import druntime v2.100.0-beta.1.
Phobos changes:
- Import phobos v2.100.0-beta.1.
gcc/d/ChangeLog:
* dmd/MERGE: Merge upstream dmd eb7bee331.
* dmd/VERSION: Update version to v2.100.0-beta.1.
* d-lang.cc (d_handle_option): Handle OPT_frevert_dip1000.
* lang.opt (frevert=dip1000): New option.
Patrick Palka [Thu, 21 Apr 2022 16:11:01 +0000 (12:11 -0400)]
libstdc++: Avoid ASCII assumptions in floating_from_chars.cc
In starts_with_ci and in __floating_from_chars_hex's inf/nan handling,
we were assuming that the letters are contiguous and that 'A' + 32 == 'a'
which is true for ASCII but not for other character encodings.
This patch fixes starts_with_ci by using a constexpr lookup table that
maps uppercase letters to lowercase, and fixes __floating_from_chars_hex
by using __from_chars_alnum_to_val.
libstdc++-v3/ChangeLog:
* include/std/charconv (__from_chars_alnum_to_val_table):
Simplify initialization of __lower/__upper_letters.
(__from_chars_alnum_to_val): Default the template parameter to
false.
* src/c++17/floating_from_chars.cc (starts_with_ci): Don't
assume the uppercase and lowercase letters are contiguous.
(__floating_from_chars_hex): Likewise.
which has a COMPOUND_EXPR, so we get to cxx_eval_constant_expression
<case COMPOUND_EXPR>. The problem here is that we call
7044 /* Check that the LHS is constant and then discard it. */
7045 cxx_eval_constant_expression (ctx, op0,
7046 true, non_constant_p, overflow_p,
7047 jump_target);
where lval is always true, so the PARM_DECL 'yes' is not evaluated into
its value.
Fixed by always passing false for 'lval' in cxx_eval_logical_expression;
there's no case where we actually expect an lvalue from a TRUTH_*.
PR c++/105321
gcc/cp/ChangeLog:
* constexpr.cc (cxx_eval_logical_expression): Always pass false for lval
to cxx_eval_constant_expression.
Fritz Reese [Tue, 19 Apr 2022 20:45:46 +0000 (16:45 -0400)]
fortran: Fix conv of UNION constructors [PR105310]
This fixes an ICE when a UNION is the (1+8*2^n)-th field in a DEC
STRUCTURE when compiled with -finit-derived -finit-local-zero.
The problem was CONSTRUCTOR_APPEND_ELT from within gfc_conv_union_initializer
modified the vector pointer, but the pointer was passed by-value,
so the old pointer from the caller (gfc_conv_structure) pointed to freed
memory.
PR fortran/105310
gcc/fortran/ChangeLog:
* trans-expr.cc (gfc_conv_union_initializer): Pass vec* by reference.
Patrick Palka [Thu, 21 Apr 2022 12:34:59 +0000 (08:34 -0400)]
libstdc++: Work around modules ICE in <charconv> [PR105297]
This makes the initializer for __table in __from_chars_alnum_to_val
dependent in an artificial way, which works around the reported modules
testsuite ICE by preventing the compiler from evaluating the initializer
parse time.
Compared to the alternative workaround of using a non-local class type
for __table, this workaround has the advantage of slightly speeding up
compilation of <charconv>, since now the table won't get built (via
constexpr evaluation) until the integer std::from_chars overload is
instantiated.
PR c++/105297
PR c++/105322
libstdc++-v3/ChangeLog:
* include/std/charconv (__from_chars_alnum_to_val): Make
initializer for __table dependent in an artificial way.
projects / thirdparty / gcc.git / log
