Junio C Hamano [Mon, 11 Mar 2024 21:12:30 +0000 (14:12 -0700)]
Merge branch 'rs/t-ctype-simplify'
Code simplification to one unit-test program.
* rs/t-ctype-simplify:
t-ctype: avoid duplicating class names
t-ctype: align output of i
t-ctype: simplify EOF check
t-ctype: allow NUL anywhere in the specification string
merge-ort/merge-recursive: do report errors in `merge_submodule()`
In 24876ebf68b (commit-reach(repo_in_merge_bases_many): report missing
commits, 2024-02-28), I taught `merge_submodule()` to handle errors
reported by `repo_in_merge_bases_many()`.
However, those errors were not passed through to the callers. That was
unintentional, and this commit remedies that.
Note that `find_first_merges()` can now also return -1 (because it
passes through that return value from `repo_in_merge_bases()`), and this
commit also adds the forgotten handling for that scenario.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: prepare for `merge_submodule()` to report errors
The `merge_submodule()` function returns an integer that indicates
whether the merge was clean (returning 1) or unclean (returning 0).
Like the version in `merge-ort.c`, the version in `merge-recursive.c`
does not report any errors (such as repository corruption) by returning
-1 as of time of writing, even if the callers in `merge-ort.c` are
prepared for exactly such errors.
However, we want to teach (both variants of) the `merge_submodule()`
function that trick: to report errors by returning -1. Therefore,
prepare the caller in `merge-recursive.c` to handle that scenario.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The upload-pack program, when talking over v2, accepted the
packfile-uris protocol extension from the client, even if it did
not advertise the capability, which has been corrected.
* jk/upload-pack-v2-capability-cleanup:
upload-pack: only accept packfile-uris if we advertised it
upload-pack: use existing config mechanism for advertisement
upload-pack: centralize setup of sideband-all config
upload-pack: use repository struct to get config
Junio C Hamano [Thu, 7 Mar 2024 23:59:42 +0000 (15:59 -0800)]
Merge branch 'jk/upload-pack-bounded-resources'
Various parts of upload-pack has been updated to bound the resource
consumption relative to the size of the repository to protect from
abusive clients.
* jk/upload-pack-bounded-resources:
upload-pack: free tree buffers after parsing
upload-pack: use PARSE_OBJECT_SKIP_HASH_CHECK in more places
upload-pack: always turn off save_commit_buffer
upload-pack: disallow object-info capability by default
upload-pack: accept only a single packfile-uri line
upload-pack: use a strmap for want-ref lines
upload-pack: use oidset for deepen_not list
upload-pack: switch deepen-not list to an oid_array
upload-pack: drop separate v2 "haves" array
A custom remote helper no longer cannot access the newly created
repository during "git clone", which is a regression in Git 2.44.
This has been corrected.
* ps/remote-helper-repo-initialization-fix:
builtin/clone: allow remote helpers to detect repo
"git log --merge" learned to pay attention to CHERRY_PICK_HEAD and
other kinds of *_HEAD pseudorefs.
* ml/log-merge-with-cherry-pick-and-other-pseudo-heads:
revision: implement `git log --merge` also for rebase/cherry-pick/revert
revision: ensure MERGE_HEAD is a ref in prepare_show_merge
Junio C Hamano [Thu, 7 Mar 2024 23:59:41 +0000 (15:59 -0800)]
Merge branch 'jt/commit-redundant-scissors-fix'
"git commit -v --cleanup=scissors" used to add the scissors line
twice in the log message buffer, which has been corrected.
* jt/commit-redundant-scissors-fix:
commit: unify logic to avoid multiple scissors lines when merging
commit: avoid redundant scissor line with --cleanup=scissors -v
Junio C Hamano [Thu, 7 Mar 2024 23:59:41 +0000 (15:59 -0800)]
Merge branch 'js/merge-tree-3-trees'
"git merge-tree" has learned that the three trees involved in the
3-way merge only need to be trees, not necessarily commits.
* js/merge-tree-3-trees:
fill_tree_descriptor(): mark error message for translation
cache-tree: avoid an unnecessary check
Always check `parse_tree*()`'s return value
t4301: verify that merge-tree fails on missing blob objects
merge-ort: do check `parse_tree()`'s return value
merge-tree: fail with a non-zero exit code on missing tree objects
merge-tree: accept 3 trees as arguments
In b0f6b6b523 (refs/reftable: don't fail empty transactions in repo
without HEAD, 2024-02-27), we have added a new test to t0610. This test
contains a useless assignment to a variable that is never actually used.
Remove it.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 5 Mar 2024 17:44:44 +0000 (09:44 -0800)]
Merge branch 'kn/for-all-refs'
"git for-each-ref" learned "--include-root-refs" option to show
even the stuff outside the 'refs/' hierarchy.
* kn/for-all-refs:
for-each-ref: add new option to include root refs
ref-filter: rename 'FILTER_REFS_ALL' to 'FILTER_REFS_REGULAR'
refs: introduce `refs_for_each_include_root_refs()`
refs: extract out `loose_fill_ref_dir_regular_file()`
refs: introduce `is_pseudoref()` and `is_headref()`
When a merge conflicted at a submodule, merge-ort backend used to
unconditionally give a lengthy message to suggest how to resolve
it. Now the message can be squelched as an advice message.
* pb/ort-make-submodule-conflict-message-an-advice:
merge-ort: turn submodule conflict suggestions into an advice
Junio C Hamano [Tue, 5 Mar 2024 17:44:42 +0000 (09:44 -0800)]
Merge branch 'jk/reflog-special-cases-fix'
The logic to access reflog entries by date and number had ugly
corner cases at the boundaries, which have been cleaned up.
* jk/reflog-special-cases-fix:
read_ref_at(): special-case ref@{0} for an empty reflog
get_oid_basic(): special-case ref@{n} for oldest reflog entry
Revert "refs: allow @{n} to work with n-sized reflog"
René Scharfe [Sun, 3 Mar 2024 10:13:28 +0000 (11:13 +0100)]
t-ctype: avoid duplicating class names
TEST_CTYPE_FUNC defines a function for testing a character classifier,
TEST_CHAR_CLASS calls it, causing the class name to be mentioned twice.
Avoid the need to define a class-specific function by letting
TEST_CHAR_CLASS do all the work. This is done by using the internal
functions test__run_begin() and test__run_end(), but they do exist to be
used in test macros after all.
Alternatively we could unroll the loop to provide a very long expression
that tests all 256 characters and EOF and hand that to TEST, but that
seems awkward and hard to read.
No change of behavior or output intended.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 3 Mar 2024 10:13:26 +0000 (11:13 +0100)]
t-ctype: simplify EOF check
EOF is not a member of any character class. If a classifier function
returns a non-zero result for it, presumably by mistake, then the unit
test check reports:
# check "!iseof(EOF)" failed at t/unit-tests/t-ctype.c:53
# i: 0xffffffff (EOF)
The numeric value of EOF is not particularly interesting in this
context. Stop printing the second line.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 3 Mar 2024 10:13:25 +0000 (11:13 +0100)]
t-ctype: allow NUL anywhere in the specification string
Replace the custom function is_in() for looking up a character in the
specification string with memchr(3) and sizeof. This is shorter,
simpler and allows NUL anywhere in the string, which may come in handy
if we ever want to support more character classes that contain it.
Getting the string size using sizeof only works in a macro and with a
string constant. Use ARRAY_SIZE and compile-time checks to make sure we
are not passed a string pointer.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 1 Mar 2024 22:38:55 +0000 (14:38 -0800)]
Merge branch 'ja/doc-placeholders-markup-rules' into HEAD
The way placeholders are to be marked-up in documentation have been
specified; use "_<placeholder>_" to typeset the word inside a pair
of <angle-brakets> emphasized.
* ja/doc-placeholders-markup-rules:
doc: clarify the format of placeholders
Junio C Hamano [Fri, 1 Mar 2024 22:38:55 +0000 (14:38 -0800)]
Merge branch 'ps/reflog-list' into HEAD
"git reflog" learned a "list" subcommand that enumerates known reflogs.
* ps/reflog-list:
builtin/reflog: introduce subcommand to list reflogs
refs: stop resolving ref corresponding to reflogs
refs: drop unused params from the reflog iterator callback
refs: always treat iterators as ordered
refs/files: sort merged worktree and common reflogs
refs/files: sort reflogs returned by the reflog iterator
dir-iterator: support iteration in sorted order
dir-iterator: pass name to `prepare_next_entry_data()` directly
Junio C Hamano [Fri, 1 Mar 2024 22:38:54 +0000 (14:38 -0800)]
Merge branch 'ja/docfixes' into HEAD
Doc update.
* ja/docfixes:
doc: end sentences with full-stop
doc: close unclosed angle-bracket of a placeholder in git-clone doc
doc: git-rev-parse: enforce command-line description syntax
Git builtins used to be called like e.g. `git-commit`, not `git
commit` (*dashed form* and *non-dashed form*, respectively). The dashed
form was deprecated in version 1.5.4 (2006). Now only a few commands
have an alternative dashed form when `SKIP_DASHED_BUILT_INS` is
active.[1]
The mention here is from 2f7ee089dff (parse-options: Add a gitcli(5) man
page., 2007-12-13), back when the deprecation was relatively
recent. These days though it seems like an irrelevant point to make to
budding CLI scripters—you don’t have to warn against a style that
probably doesn’t even work on their git(1) installation.
† 1: 179227d6e21 (Optionally skip linking/copying the built-ins,
2020-09-21)
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By and large, variable groupings in Documentation/config.txt are sorted
alphabetically, though a few are not. Those outliers make it more
difficult to find a specific grouping when quickly running an eye over
the list to locate a variable of interest. Address this shortcoming by
sorting the groupings alphabetically.
NOTE: This change only sorts the top-level groupings (i.e. "core.*"
comes after "completion.*"); it does not touch the ordering of variables
within each group since variables within individual groups might
intentionally be ordered in some other fashion (such as
most-common-first or most-important-first).
Reported-by: Bruno Haible <bruno@clisp.org> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eugenio Gigante [Thu, 29 Feb 2024 19:44:44 +0000 (20:44 +0100)]
add: use unsigned type for collection of bits
The 'refresh' function in 'builtin/add.c' declares 'flags' as
signed, and passes it as an argument to the 'refresh_index'
function, which though expects an unsigned value.
Since in this case 'flags' represents a bag of bits, whose MSB is
not used in special ways, change the type of 'flags' to unsigned.
Signed-off-by: Eugenio Gigante <giganteeugenio2@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:50:50 +0000 (17:50 -0500)]
upload-pack: only accept packfile-uris if we advertised it
Clients are only supposed to request particular capabilities or features
if the server advertised them. For the "packfile-uris" feature, we only
advertise it if uploadpack.blobpacfileuri is set, but we always accept a
request from the client regardless.
In practice this doesn't really hurt anything, as we'd pass the client's
protocol list on to pack-objects, which ends up ignoring it. But we
should try to follow the protocol spec, and tightening this up may catch
buggy or misbehaving clients more easily.
Thanks to recent refactoring, we can hoist the config check from
upload_pack_advertise() into upload_pack_config(). Note the subtle
handling of a value-less bool (which does not count for triggering an
advertisement).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-reach(repo_get_merge_bases_many_dirty): pass on errors
(Actually, this commit is only about passing on "missing commits"
errors, but adding that to the commit's title would have made it too
long.)
The `merge_bases_many()` function was just taught to indicate parsing
errors, and now the `repo_get_merge_bases_many_dirty()` function is
aware of that, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-reach(repo_get_merge_bases_many): pass on "missing commits" errors
The `merge_bases_many()` function was just taught to indicate parsing
errors, and now the `repo_get_merge_bases_many()` function is aware of
that, too.
Naturally, there are a lot of callers that need to be adjusted now, too.
Next stop: `repo_get_merge_bases_dirty()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-reach(get_octopus_merge_bases): pass on "missing commits" errors
The `merge_bases_many()` function was just taught to indicate parsing
errors, and now the `repo_get_merge_bases()` function (which is also
surfaced via the `get_merge_bases()` macro) is aware of that, too.
Naturally, the callers need to be adjusted now, too.
Next step: adjust `repo_get_merge_bases_many()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-reach(repo_get_merge_bases): pass on "missing commits" errors
The `merge_bases_many()` function was just taught to indicate parsing
errors, and now the `repo_get_merge_bases()` function (which is also
surfaced via the `repo_get_merge_bases()` macro) is aware of that, too.
Naturally, there are a lot of callers that need to be adjusted now, too.
Next step: adjust the callers of `get_octopus_merge_bases()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-reach(merge_bases_many): pass on "missing commits" errors
The `paint_down_to_common()` function was just taught to indicate
parsing errors, and now the `merge_bases_many()` function is aware of
that, too.
One tricky aspect is that `merge_bases_many()` parses commits of its
own, but wants to gracefully handle the scenario where NULL is passed as
a merge head, returning the empty list of merge bases. The way this was
handled involved calling `repo_parse_commit(NULL)` and relying on it to
return an error. This has to be done differently now so that we can
handle missing commits correctly by producing a fatal error.
Next step: adjust the caller of `merge_bases_many()`:
`get_merge_bases_many_0()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit cannot be parsed, it is currently ignored when looking for
merge bases. That's undesirable as the operation can pretend success in
a corrupt repository, even though the command should fail with an error
message.
Let's start at the bottom of the stack by teaching the
`paint_down_to_common()` function to return an `int`: if negative, it
indicates fatal error, if 0 success.
This requires a couple of callers to be adjusted accordingly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-reach(paint_down_to_common): prepare for handling shallow commits
When `git fetch --update-shallow` needs to test for commit ancestry, it
can naturally run into a missing object (e.g. if it is a parent of a
shallow commit). For the purpose of `--update-shallow`, this needs to be
treated as if the child commit did not even have that parent, i.e. the
commit history needs to be clamped.
For all other scenarios, clamping the commit history is actually a bug,
as it would hide repository corruption (for an analysis regarding
shallow and partial clones, see the analysis further down).
Add a flag to optionally ask the function to ignore missing commits, as
`--update-shallow` needs it to, while detecting missing objects as a
repository corruption error by default.
This flag is needed, and cannot be replaced by `is_repository_shallow()`
to indicate that situation, because that function would return 0 in the
`--update-shallow` scenario: There is not actually a `shallow` file in
that scenario, as demonstrated e.g. by t5537.10 ("add new shallow root
with receive.updateshallow on") and t5538.4 ("add new shallow root with
receive.updateshallow on").
Note: shallow commits' parents are set to `NULL` internally already,
therefore there is no need to special-case shallow repositories here, as
the merge-base logic will not try to access parent commits of shallow
commits.
Likewise, partial clones aren't an issue either: If a commit is missing
during the revision walk in the merge-base logic, it is fetched via
`promisor_remote_get_direct()`. And not only the single missing commit
object: Due to the way the "promised" objects are fetched (in
`fetch_objects()` in `promisor-remote.c`, using `fetch
--filter=blob:none`), there is no actual way to fetch a single commit
object, as the remote side will pass that commit OID to `pack-objects
--revs [...]` which in turn passes it to `rev-list` which interprets
this as a commit _range_ instead of a single object. Therefore, in
partial clones (unless they are shallow in addition), all commits
reachable from a commit that is in the local object database are also
present in that local database.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:48:18 +0000 (17:48 -0500)]
upload-pack: use existing config mechanism for advertisement
When serving a v2 capabilities request, we call upload_pack_advertise()
to tell us the set of features we can advertise to the client. That
involves looking at various config options, all of which need to be kept
in sync with the rules we use in upload_pack_config to set flags like
allow_filter, allow_sideband_all, and so on. If these two pieces of code
get out of sync then we may refuse to respect a capability we
advertised, or vice versa accept one that we should not.
Instead, let's call the same config helper that we'll use for processing
the actual client request, and then just pick the values out of the
resulting struct. This is only a little bit shorter than the current
code, but we don't repeat any policy logic (e.g., we don't have to worry
about the magic sideband-all environment variable here anymore).
And this reveals a gap in the existing code: there is no struct flag for
the packfile-uris capability (we accept it even if it is not advertised,
which we should not). We'll leave the advertisement code for now and
deal with it in the next patch.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:47:18 +0000 (17:47 -0500)]
upload-pack: centralize setup of sideband-all config
We read uploadpack.allowsidebandall to set a matching flag in our
upload_pack_data struct. But for our tests, we also respect
GIT_TEST_SIDEBAND_ALL from the environment, and anybody looking at the
flag in the struct needs to remember to check both. There's only one
such piece of code now, but we're about to add another.
So let's have the config step actually fold the environment value into
the struct, letting the rest of the code use the flag in the obvious
way.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:46:47 +0000 (17:46 -0500)]
upload-pack: use repository struct to get config
Our upload_pack_v2() function gets a repository struct, but we ignore it
totally. In practice this doesn't cause any problems, as it will never
differ from the_repository. But in the spirit of taking a small step
towards getting rid of the_repository, let's at least starting using it
to grab config. There are probably other spots that could benefit, but
it's a start.
Note that we don't need to pass the repo for protected_config(); the
whole point there is that we are not looking at repo config, so there is
no repo-specific version of the function.
For the v0 version of the protocol, we're not passed a repository
struct, so we'll continue to use the_repository there.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:39:07 +0000 (17:39 -0500)]
upload-pack: free tree buffers after parsing
When a client sends us a "want" or "have" line, we call parse_object()
to get an object struct. If the object is a tree, then the parsed state
means that tree->buffer points to the uncompressed contents of the tree.
But we don't really care about it. We only really need to parse commits
and tags; for trees and blobs, the important output is just a "struct
object" with the correct type.
But much worse, we do not ever free that tree buffer. It's not leaked in
the traditional sense, in that we still have a pointer to it from the
global object hash. But if the client requests many trees, we'll hold
all of their contents in memory at the same time.
Nobody really noticed because it's rare for clients to directly request
a tree. It might happen for a lightweight tag pointing straight at a
tree, or it might happen for a "tree:depth" partial clone filling in
missing trees.
But it's also possible for a malicious client to request a lot of trees,
causing upload-pack's memory to balloon. For example, without this
patch, requesting every tree in git.git like:
pktline() {
local msg="$*"
printf "%04x%s\n" $((1+4+${#msg})) "$msg"
}
want_trees() {
pktline command=fetch
printf 0001
git cat-file --batch-all-objects --batch-check='%(objectname) %(objecttype)' |
while read oid type; do
test "$type" = "tree" || continue
pktline want $oid
done
pktline done
printf 0000
}
shows a peak heap usage of ~3.7GB. Which is just about the sum of the
sizes of all of the uncompressed trees. For linux.git, it's closer to
17GB.
So the obvious thing to do is to call free_tree_buffer() after we
realize that we've parsed a tree. We know that upload-pack won't need it
later. But let's push the logic into parse_object_with_flags(), telling
it to discard the tree buffer immediately. There are two reasons for
this. One, all of the relevant call-sites already call the with_options
variant to pass the SKIP_HASH flag. So it actually ends up as less code
than manually free-ing in each spot. And two, it enables an extra
optimization that I'll discuss below.
I've touched all of the sites that currently use SKIP_HASH in
upload-pack. That drops the peak heap of the upload-pack invocation
above from 3.7GB to ~24MB.
I've also modified the caller in get_reference(); a partial clone
benefits from its use in pack-objects for the reasons given in 0bc2557951 (upload-pack: skip parse-object re-hashing of "want" objects,
2022-09-06), where we were measuring blob requests. But note that the
results of get_reference() are used for traversing, as well; so we
really would _eventually_ use the tree contents. That makes this at
first glance a space/time tradeoff: we won't hold all of the trees in
memory at once, but we'll have to reload them each when it comes time to
traverse.
And here's where our extra optimization comes in. If the caller is not
going to immediately look at the tree contents, and it doesn't care
about checking the hash, then parse_object() can simply skip loading the
tree entirely, just like we do for blobs! And now it's not a space/time
tradeoff in get_reference() anymore. It's just a lazy-load: we're
delaying reading the tree contents until it's time to actually traverse
them one by one.
And of course for upload-pack, this optimization means we never load the
trees at all, saving lots of CPU time. Timing the "every tree from
git.git" request above shows upload-pack dropping from 32 seconds of CPU
to 19 (the remainder is mostly due to pack-objects actually sending the
pack; timing just the upload-pack portion shows we go from 13s to
~0.28s).
These are all highly gamed numbers, of course. For real-world
partial-clone requests we're saving only a small bit of time in
practice. But it does help harden upload-pack against malicious
denial-of-service attacks.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:39:03 +0000 (17:39 -0500)]
upload-pack: use PARSE_OBJECT_SKIP_HASH_CHECK in more places
In commit 0bc2557951 (upload-pack: skip parse-object re-hashing of
"want" objects, 2022-09-06), we optimized the parse_object() calls for
v2 "want" lines from the client so that they avoided parsing blobs, and
so that they used the commit-graph rather than parsing commit objects
from scratch.
We should extend that to two other spots:
1. We parse "have" objects in the got_oid() function. These won't
generally be non-commits (unlike "want" lines from a partial
clone). But we still benefit from the use of the commit-graph.
2. For v0, the "want" lines are parsed in receive_needs(). These are
also less likely to be non-commits because by default they have to
be ref tips. There are config options you might set to allow
non-tip objects, but you'd mostly do so to support partial clones,
and clients recent enough to support partial clone will generally
speak v2 anyway.
So I don't expect this change to improve performance much for day-to-day
operations. But both are possible denial-of-service vectors, where an
attacker can waste our time by sending over a large number of objects to
parse (of course we may waste even more time serving a pack to them, but
we try as much as possible to optimize that in pack-objects; we should
do what we can here in upload-pack, too).
With this patch, running p5600 with GIT_TEST_PROTOCOL_VERSION=0 shows
similar results to what we saw in 0bc2557951 (which ran with the v2
protocol by default). Here are the numbers for linux.git:
Test HEAD^ HEAD
-----------------------------------------------------------------------------
5600.3: checkout of result 50.91(87.95+2.93) 41.75(79.00+3.18) -18.0%
Or for a more extreme (and malicious) case, we can claim to "have" every
blob in git.git over the v0 protocol:
$ time ./git.old upload-pack . <input >/dev/null
real 0m52.951s
user 0m51.633s
sys 0m1.304s
$ time ./git.new upload-pack . <input >/dev/null
real 0m0.261s
user 0m0.156s
sys 0m0.105s
(Note that these don't actually compute a pack because of the hacky
protocol usage, so those numbers are representing the raw blob-parsing
effort done by upload-pack).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:39:00 +0000 (17:39 -0500)]
upload-pack: always turn off save_commit_buffer
When the client sends us "want $oid" lines, we call parse_object($oid)
to get an object struct. It's important to parse the commits because we
need to traverse them in the negotiation phase. But of course we don't
need to hold on to the commit messages for each one.
We've turned off the save_commit_buffer flag in get_common_commits() for
a long time, since f0243f26f6 (git-upload-pack: More efficient usage of
the has_sha1 array, 2005-10-28). That helps with the commits we see
while actually traversing. But:
1. That function is only used by the v0 protocol. I think the v2
protocol's code path leaves the flag on (and thus pays the extra
memory penalty), though I didn't measure it specifically.
2. If the client sends us a bunch of "want" lines, that happens before
the negotiation phase. So we'll hold on to all of those commit
messages. Generally the number of "want" lines scales with the
refs, not with the number of objects in the repo. But a malicious
client could send a lot in order to waste memory.
As an example of (2), if I generate a request to fetch all commits in
git.git like this:
pktline() {
local msg="$*"
printf "%04x%s\n" $((1+4+${#msg})) "$msg"
}
want_commits() {
pktline command=fetch
printf 0001
git cat-file --batch-all-objects --batch-check='%(objectname) %(objecttype)' |
while read oid type; do
test "$type" = "commit" || continue
pktline want $oid
done
pktline done
printf 0000
}
before this patch upload-pack peaks at ~125MB, and after at ~35MB. The
difference is not coincidentally about the same as the sum of all commit
object sizes as computed by:
git cat-file --batch-all-objects --batch-check='%(objecttype) %(objectsize)' |
perl -alne '$v += $F[1] if $F[0] eq "commit"; END { print $v }'
In a larger repository like linux.git, that number is ~1GB.
In a repository with a full commit-graph file this will have no impact
(and the commit graph would save us from parsing at all, so is a much
better solution!). But it's easy to do, might help a little in
real-world cases (where even if you have a commit graph it might not be
fully up to date), and helps a lot for a worst-case malicious request.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 28 Feb 2024 22:38:58 +0000 (17:38 -0500)]
upload-pack: disallow object-info capability by default
We added an "object-info" capability to the v2 upload-pack protocol in a2ba162cda (object-info: support for retrieving object info,
2021-04-20). In the almost 3 years since, we have not added any
client-side support, and it does not appear to exist in other
implementations either (JGit understands the verb on the server side,
but not on the client side).
Since this largely unused code is accessible over the network by
default, it increases the attack surface of upload-pack. I don't know of
any particularly severe problem, but one issue is that because of the
request/response nature of the v2 protocol, it will happily read an
unbounded number of packets, adding each one to a string list (without
regard to whether they are objects we know about, duplicates, etc).
This may be something we want to improve in the long run, but in the
short term it makes sense to disable the feature entirely. We'll add a
config option as an escape hatch for anybody who wants to develop the
feature further.
A more gentle option would be to add the config option to let people
disable it manually, but leave it enabled by default. But given that
there's no client side support, that seems like the wrong balance with
security.
Disabling by default will slow adoption a bit once client-side support
does become available (there were some patches[1] in 2022, but nothing
got merged and there's been nothing since). But clients have to deal
with older servers that do not understand the option anyway (and the
capability system handles that), so it will just be a matter of servers
flipping their config at that point (and hopefully once any unbounded
allocations have been addressed).
[jk: this is a patch that GitHub has been running for several years, but
rebased forward and with a new commit message for upstream]
Jeff King [Wed, 28 Feb 2024 22:38:46 +0000 (17:38 -0500)]
upload-pack: accept only a single packfile-uri line
When we see a packfile-uri line from the client, we use
string_list_split() to split it on commas and store the result in a
string_list. A single packfile-uri line is therefore limited to storing
~64kb, the size of a pkt-line.
But we'll happily accept multiple such lines, and each line appends to
the string list, growing without bound.
In theory this could be useful, making:
0017packfile-uris http
0018packfile-uris https
equivalent to:
001dpackfile-uris http,https
But the protocol documentation doesn't indicate that this should work
(and indeed, refers to this in the singular as "the following argument
can be included in the client's request"). And the client-side
implementation in fetch-pack has always sent a single line (JGit appears
to understand the line on the server side but has no client-side
implementation, and libgit2 understands neither).
If we were worried about compatibility, we could instead just put a
limit on the maximum number of values we'd accept. The current client
implementation limits itself to only two values: "http" and "https", so
something like "256" would be more than enough. But accepting only a
single line seems more in line with the protocol documentation, and
matches other parts of the protocol (e.g., we will not accept a second
"filter" line).
We'll also make this more explicit in the protocol documentation; as
above, I think this was always the intent, but there's no harm in making
it clear.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:38:40 +0000 (17:38 -0500)]
upload-pack: use a strmap for want-ref lines
When the "ref-in-want" capability is advertised (which it is not by
default), then upload-pack processes a "want-ref" line from the client
by checking that the name is a valid ref and recording it in a
string-list.
In theory this list should grow no larger than the number of refs in the
server-side repository. But since we don't do any de-duplication, a
client which sends "want-ref refs/heads/foo" over and over will cause
the array to grow without bound.
We can fix this by switching to strmap, which efficiently detects
duplicates. There are two client-visible changes here:
1. The "wanted-refs" response will now be in an apparently-random
order (based on iterating the hashmap) rather than the order given
by the client. The protocol documentation is quiet on ordering
here. The current fetch-pack implementation is happy with any
order, as it looks up each returned ref using a binary search in
its local sorted list. JGit seems to implement want-ref on the
server side, but has no client-side support. libgit2 doesn't
support either side.
It would obviously be possible to record the original order or to
use the strmap as an auxiliary data structure. But if the client
doesn't care, we may as well do the simplest thing.
2. We'll now reject duplicates explicitly as a protocol error. The
client should never send them (and our current implementation, even
when asked to "git fetch master:one master:two" will de-dup on the
client side).
If we wanted to be more forgiving, we could perhaps just throw away
the duplicates. But then our "wanted-refs" response back to the
client would omit the duplicates, and it's hard to say what a
client that accidentally sent a duplicate would do with that. So I
think we're better off to complain loudly before anybody
accidentally writes such a client.
Let's also add a note to the protocol documentation clarifying that
duplicates are forbidden. As discussed above, this was already the
intent, but it's not very explicit.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:37:44 +0000 (17:37 -0500)]
upload-pack: use oidset for deepen_not list
We record the oid of every deepen-not line the client sends to us. For a
well-behaved client, the resulting array should be bounded by the number
of unique refs we have. But because there's no de-duplication, a
malicious client can cause the array to grow unbounded by just sending
the same "refs/heads/foo" over and over (assuming such a ref exists).
Since the deepen-not list is just being fed to a "rev-list --not"
traversal, the order of items doesn't matter. So we can replace the
oid_array with an oidset which notices and skips duplicates.
That bounds the memory in malicious cases to be linear in the number of
unique refs. And even in non-malicious cases, there may be a slight
improvement in memory usage if multiple refs point to the same oid
(though in practice this list is probably pretty tiny anyway, as it
comes from the user specifying "--shallow-exclude" on the client fetch).
Note that in the trace2 output we'll now output the number of
de-duplicated objects, rather than the total number of "deepen-not"
lines we received. This is arguably a more useful value for tracing /
debugging anyway.
Reported-by: Benjamin Flesch <benjaminflesch@icloud.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:37:20 +0000 (17:37 -0500)]
upload-pack: switch deepen-not list to an oid_array
When we see a "deepen-not" line from the client, we verify that the
given name can be resolved as a ref, and then add it to a string list to
be passed later to an internal "rev-list --not" traversal. We record the
actual refname in the string list (so the traversal resolves it again
later), but we'd be better off recording the resolved oid:
1. There's a tiny bit of wasted work in resolving it twice.
2. There's a small race condition with simultaneous updates; the later
traversal may resolve to a different value (or not at all). This
shouldn't cause any bad behavior (we do not care about the value
in this first resolution, so whatever value rev-list gets is OK)
but it could mean a confusing error message (if upload-pack fails
to resolve the ref it produces a useful message, but a failing
traversal later results in just "revision walk setup failed").
3. It makes it simpler to de-duplicate the results. We don't de-dup at
all right now, but we will in the next patch.
>From the client's perspective the behavior should be the same.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Feb 2024 22:37:13 +0000 (17:37 -0500)]
upload-pack: drop separate v2 "haves" array
When upload-pack sees a "have" line in the v0 protocol, it immediately
calls got_oid() with its argument and potentially produces an ACK
response. In the v2 protocol, we simply record the argument in an
oid_array, and only later process all of the "have" objects by calling
the equivalent of got_oid() on the contents of the array.
This makes some sense, as v2 is a pure request/response protocol, as
opposed to v0's asynchronous negotiation phase. But there's a downside:
a client can send us an infinite number of garbage "have" lines, which
we'll happily slurp into the array, consuming memory. Whereas in v0,
they are limited by the number of objects in the repository (because
got_oid() only records objects we have ourselves, and we avoid
duplicates by setting a flag on the object struct).
We can make v2 behave more like v0 by also calling got_oid() directly
when v2 parses a "have" line. Calling it early like this is OK because
got_oid() itself does not interact with the client; it only confirms
that we have the object and sets a few flags. Note that unlike v0, v2
does not ever (before or after this patch) check the return code of
got_oid(), which lets the caller know whether we have the object. But
again, that makes sense; v0 is using it to asynchronously tell the
client to stop sending. In v2's synchronous protocol, we just discard
those entries (and decide how to ACK at the end of each round).
There is one slight tweak we need, though. In v2's state machine, we
reach the SEND_ACKS state if the other side sent us any "have" lines,
whether they were useful or not. Right now we do that by checking
whether the "have" array had any entries, but if we record only the
useful ones, that doesn't work. Instead, we can add a simple boolean
that tells us whether we saw any have line (even if it was useless).
This lets us drop the "haves" array entirely, as we're now placing
objects directly into the "have_obj" object array (which is where
got_oid() put them in the long run anyway). And as a bonus, we can drop
the secondary "common" array used in process_haves_and_send_acks(). It
was essentially a copy of "haves" minus the objects we do not have. But
now that we are using "have_obj" directly, we know everything in it is
useful. So in addition to protecting ourselves against malicious input,
we should slightly lower our memory usage for normal inputs.
Note that there is one user-visible effect. The trace2 output records
the number of "haves". Previously this was the total number of "have"
lines we saw, but now is the number of useful ones. We could retain the
original meaning by keeping a separate counter, but it doesn't seem
worth the effort; this trace info is for debugging and metrics, and
arguably the count of common oids is at least as useful as the total
count.
Reported-by: Benjamin Flesch <benjaminflesch@icloud.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Lohmann [Wed, 28 Feb 2024 13:54:54 +0000 (08:54 -0500)]
revision: implement `git log --merge` also for rebase/cherry-pick/revert
'git log' learned in ae3e5e1ef2 (git log -p --merge [[--] paths...],
2006-07-03) to show commits touching conflicted files in the range
HEAD...MERGE_HEAD, an addition documented in d249b45547 (Document
rev-list's option --merge, 2006-08-04).
It can be useful to look at the commit history to understand what lead
to merge conflicts also for other mergy operations besides merges, like
cherry-pick, revert and rebase.
For rebases and cherry-picks, an interesting range to look at is
HEAD...{REBASE_HEAD,CHERRY_PICK_HEAD}, since even if all the commits
included in that range are not directly part of the 3-way merge,
conflicts encountered during these operations can indeed be caused by
changes introduced in preceding commits on both sides of the history.
For revert, as we are (most likely) reversing changes from a previous
commit, an appropriate range is REVERT_HEAD..HEAD, which is equivalent
to REVERT_HEAD...HEAD and to HEAD...REVERT_HEAD, if we keep HEAD and its
parents on the left side of the range.
As such, adjust the code in prepare_show_merge so it constructs the
range HEAD...$OTHER for OTHER={MERGE_HEAD, CHERRY_PICK_HEAD, REVERT_HEAD
or REBASE_HEAD}. Note that we try these pseudorefs in order, so keep
REBASE_HEAD last since the three other operations can be performed
during a rebase. Note also that in the uncommon case where $OTHER and
HEAD do not share a common ancestor, this will show the complete
histories of both sides since their root commits, which is the same
behaviour as currently happens in that case for HEAD and MERGE_HEAD.
Adjust the documentation of this option accordingly.
Co-authored-by: Johannes Sixt <j6t@kdbg.org> Co-authored-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Michael Lohmann <mi.al.lohmann@gmail.com>
[jc: tweaked in j6t's precedence fix that tries REBASE_HEAD last] Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Lohmann [Wed, 28 Feb 2024 13:54:53 +0000 (08:54 -0500)]
revision: ensure MERGE_HEAD is a ref in prepare_show_merge
This is done to
(1) ensure MERGE_HEAD is a ref,
(2) obtain the oid without any prefixing by refs.c:repo_dwim_ref()
(3) error out when MERGE_HEAD is a symref.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Michael Lohmann <mi.al.lohmann@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some functions in Git's source code follow the convention that returning
a negative value indicates a fatal error, e.g. repository corruption.
Let's use this convention in `repo_in_merge_bases()` to report when one
of the specified commits is missing (i.e. when `repo_parse_commit()`
reports an error).
Also adjust the callers of `repo_in_merge_bases()` to handle such
negative return values.
Note: As of this patch, errors are returned only if any of the specified
merge heads is missing. Over the course of the next patches, missing
commits will also be reported by the `paint_down_to_common()` function,
which is called by `repo_in_merge_bases_many()`, and those errors will
be properly propagated back to the caller at that stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently this function treats unrelated commit histories the same way
as commit histories with missing commit objects.
Typically, missing commit objects constitute a corrupt repository,
though, and should be reported as such. The next commits will make it
so, but there is one exception: In `git fetch --update-shallow` we
_expect_ commit objects to be missing, and we do want to treat the
now-incomplete commit histories as unrelated.
To allow for that, let's introduce an additional parameter that is
passed to `repo_in_merge_bases_many()` to trigger this behavior, and use
it in the two callers in `shallow.c`.
This commit changes behavior slightly: unless called from the
`shallow.c` functions that set the `ignore_missing_commits` bit, any
non-existing tip commit that is passed to `repo_in_merge_bases_many()`
will now result in an error.
Note: When encountering missing commits while traversing the commit
history in search for merge bases, with this commit there won't be a
change in behavior just yet, their children will still be interpreted as
root commits. This bug will get fixed by follow-up commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-reach(paint_down_to_common): plug two memory leaks
When a commit is missing, we return early (currently pretending that no
merge basis could be found in that case). At that stage, it is possible
that a merge base could have been found already, and added to the
`result`, which is now leaked.
The priority queue has a similar issue: There might still be a commit in
that queue.
Let's release both, to address the potential memory leaks.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Wed, 28 Feb 2024 09:10:11 +0000 (10:10 +0100)]
revision: fix --missing=[print|allow*] for annotated tags
In 9830926c7d (rev-list: add commit object support in `--missing`
option, 2023-10-27) we fixed the `--missing` option in `git rev-list`
so that it works with missing commits, not just blobs/trees.
Unfortunately, such a command was still failing with a "fatal: bad
object <oid>" if it was passed a missing commit, blob or tree as an
argument (before the rev walking even begins). This was fixed in a
recent commit.
That fix still doesn't work when an argument passed to the command is
an annotated tag pointing to a missing commit though. In that case
`git rev-list --missing=...` still errors out with a "fatal: bad
object <oid>" error where <oid> is the object ID of the missing
commit.
Let's fix this issue, and also, while at it, let's add tests not just
for annotated tags but also for regular tags and branches.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 28 Feb 2024 00:04:31 +0000 (16:04 -0800)]
Merge branch 'jc/am-whitespace-doc'
"git am --help" now tells readers what actions are available in
"git am --whitespace=<action>", in addition to saying that the
option is passed through to the underlying "git apply".
* jc/am-whitespace-doc:
doc: add shortcut to "am --whitespace=<action>"
refs/reftable: don't fail empty transactions in repo without HEAD
Under normal circumstances, it shouldn't ever happen that a repository
has no HEAD reference. In fact, git-update-ref(1) would fail any request
to delete the HEAD reference, and a newly initialized repository always
pre-creates it, too.
We have however changed git-clone(1) to partially initialize the
refdb just up to the point where remote helpers can find the
repository. With that change, we are going to run into a situation
where repositories have no refs at all.
Now there is a very particular edge case in this situation: when
preparing an empty ref transacton, we end up returning whatever value
`read_ref_without_reload()` returned to the caller. Under normal
conditions this would be fine: "HEAD" should usually exist, and thus the
function would return `0`. But if "HEAD" doesn't exist, the function
returns a positive value which we end up returning to the caller.
Fix this bug by resetting the return code to `0` and add a test.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/clone: allow remote helpers to detect repo
In 18c9cb7524 (builtin/clone: create the refdb with the correct object
format, 2023-12-12), we have changed git-clone(1) so that it delays
creation of the refdb until after it has learned about the remote's
object format. This change was required for the reftable backend, which
encodes the object format into the tables. So if we pre-initialized the
refdb with the default object format, but the remote uses a different
object format than that, then the resulting tables would have encoded
the wrong object format.
This change unfortunately breaks remote helpers which try to access the
repository that is about to be created. Because the refdb has not yet
been initialized at the point where we spawn the remote helper, we also
don't yet have "HEAD" or "refs/". Consequently, any Git commands ran by
the remote helper which try to access the repository would fail because
it cannot be discovered.
This is essentially a chicken-and-egg problem: we cannot initialize the
refdb because we don't know about the object format. But we cannot learn
about the object format because the remote helper may be unable to
access the partially-initialized repository.
Ideally, we would address this issue via capabilities. But the remote
helper protocol is not structured in a way that guarantees that the
capability announcement happens before the remote helper tries to access
the repository.
Instead, fix this issue by partially initializing the refdb up to the
point where it becomes discoverable by Git commands.
Reported-by: Mike Hommey <mh@glandium.org> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 27 Feb 2024 16:48:29 +0000 (08:48 -0800)]
git: extend --no-lazy-fetch to work across subprocesses
Modeling after how the `--no-replace-objects` option is made usable
across subprocess spawning (e.g., cURL based remote helpers are
spawned as a separate process while running "git fetch"), allow the
`--no-lazy-fetch` option to be passed across process boundaries.
Do not model how the value of GIT_NO_REPLACE_OBJECTS environment
variable is ignored, though. Just use the usual git_env_bool() to
allow "export GIT_NO_LAZY_FETCH=0" and "unset GIT_NO_LAZY_FETCH"
to be equivalents.
Also do not model how the request is not propagated to subprocesses
we spawn (e.g. "git clone --local" that spawns a new process to work
in the origin repository, while the original one working in the
newly created one) by the "--no-replace-objects" option, as this "do
not lazily fetch from the promisor" is more about a per-request
debugging aid, not "this repository's promisor should not be relied
upon" property specific to a repository.
Josh Triplett [Tue, 27 Feb 2024 09:17:36 +0000 (01:17 -0800)]
commit: unify logic to avoid multiple scissors lines when merging
prepare_to_commit has some logic to figure out whether merge already
added a scissors line, and therefore it shouldn't add another. Now that
wt_status_add_cut_line has built-in state for whether it has
already added a previous line, just set that state instead, and then
remove that condition from subsequent calls to wt_status_add_cut_line.
Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh Triplett [Tue, 27 Feb 2024 09:16:09 +0000 (01:16 -0800)]
commit: avoid redundant scissor line with --cleanup=scissors -v
`git commit --cleanup=scissors -v` prints two scissors lines:
one at the start of the comment lines, and the other right before the
diff. This is redundant, and pushes the diff further down in the user's
editor than it needs to be.
Make wt_status_add_cut_line() remember if it has added a cut line before,
and avoid adding a redundant one.
Add a test for this.
Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 26 Feb 2024 23:28:16 +0000 (15:28 -0800)]
doc: clarify the wording on <git-compat-util.h> requirement
The reason why we require the <git-compat-util.h> file to be the
first header file to be included is because it insulates other
header files and source files from platform differences, like which
system header files must be included in what order, and what C
preprocessor feature macros must be defined to trigger certain
features we want out of the system.
We tried to clarify the rule in the coding guidelines document, but
the wording was a bit fuzzy that can lead to misinterpretations like
you can include <xdiff/xinclude.h> only to avoid having to include
<git-compat-util.h> even if you have nothing to do with the xdiff
implementation, for example. "You do not have to include more than
one of these" was also misleading and would have been puzzling if
you _needed_ to depend on more than one of these approved headers
(answer: you are allowed to include them all if you need the
declarations in them for reasons other than that you want to avoid
including compat-util yourself).
Instead of using the phrase "approved headers", enumerate them as
exceptions, each labeled with its intended audiences, to avoid such
misinterpretations. The structure also makes it easier to add new
exceptions, so add the description of "t/unit-tests/test-lib.h"
being an exception only for the unit tests implementation as an
example.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Kyle Lippincott <spectral@google.com> Acked-by: Elijah Newren <newren@gmail.com>
This variable is used as the primary way to disable the object
replacement mechanism, with the "--no-replace-objects" command line
option as an end-user visible way to set it, but has not been
documented.
The original reason why it was left undocumented might be because it
was meant as an internal implementation detail, but the thing is,
that our tests use the environment variable directly without the
command line option, and there certainly are folks who learned its
use from there, making it impossible to deprecate or change its
behaviour by now.
Add documentation and note that for this variable, unlike many
boolean-looking environment variables, only the presence matters,
not what value it is set to.
Junio C Hamano [Tue, 27 Feb 2024 02:10:25 +0000 (18:10 -0800)]
Merge branch 'ps/ref-tests-update-even-more'
More tests that are marked as "ref-files only" have been updated to
improve test coverage of reftable backend.
* ps/ref-tests-update-even-more:
t7003: ensure filter-branch prunes reflogs with the reftable backend
t2011: exercise D/F conflicts with HEAD with the reftable backend
t1405: remove unneeded cleanup step
t1404: make D/F conflict tests compatible with reftable backend
t1400: exercise reflog with gaps with reftable backend
t0410: convert tests to use DEFAULT_REPO_FORMAT prereq
t: move tests exercising the "files" backend
projects / thirdparty / git.git / log
