Elijah Newren [Wed, 26 Jan 2022 01:43:45 +0000 (01:43 +0000)]
sequencer, stash: fix running from worktree subdir
In commits bc3ae46b42 ("rebase: do not attempt to remove
startup_info->original_cwd", 2021-12-09) and 0fce211ccc ("stash: do not
attempt to remove startup_info->original_cwd", 2021-12-09), we wanted to
allow the subprocess to know which directory the parent process was
running from, so that the subprocess could protect it. However...
When run from a non-main worktree, setup_git_directory() will note
that the discovered git directory
(/PATH/TO/.git/worktree/non-main-worktree) does not match
DEFAULT_GIT_DIR_ENVIRONMENT (see setup_discovered_git_dir()), and
decide to set GIT_DIR in the environment. This matters because...
Whenever git is run with the GIT_DIR environment variable set, and
GIT_WORK_TREE not set, it presumes that '.' is the working tree. So...
This combination results in the subcommand being very confused about
the working tree. Fix it by also setting the GIT_WORK_TREE environment
variable along with setting cmd.dir.
A possibly more involved fix we could consider for later would be to
make setup.c set GIT_WORK_TREE whenever (a) it discovers both the git
directory and the working tree and (b) it decides to set GIT_DIR in the
environment. I did not attempt that here as such would be too big of a
change for a 2.35.1 release.
Test-case-by: Glen Choo <chooglen@google.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 24 Jan 2022 17:14:46 +0000 (09:14 -0800)]
Merge branch 'ab/checkout-branch-info-leakfix'
We added an unrelated sanity checking that leads to a BUG() while
plugging a leak, which triggered in a repository with symrefs in
the local branch namespace that point at a ref outside. Partially
revert the change to avoid triggering the BUG().
* ab/checkout-branch-info-leakfix:
checkout: avoid BUG() when hitting a broken repository
Junio C Hamano [Sat, 22 Jan 2022 00:58:30 +0000 (16:58 -0800)]
checkout: avoid BUG() when hitting a broken repository
When 9081a421 (checkout: fix "branch info" memory leaks, 2021-11-16)
cleaned up existing memory leaks, we added an unrelated sanity check
to ensure that a local branch is truly local and not a symref to
elsewhere that dies with BUG() otherwise. This was misguided in two
ways. First of all, such a tightening did not belong to a leak-fix
patch. And the condition it detected was *not* a bug in our program
but a problem in user data, where warning() or die() would have been
more appropriate.
As the condition is not fatal (the result of computing the local
branch name in the code that is involved in the faulty check is only
used as a textual label for the commit), let's revert the code to
the original state, i.e. strip "refs/heads/" to compute the local
branch name if possible, and otherwise leave it NULL. The consumer
of the information in merge_working_tree() is prepared to see NULL
in there and act accordingly.
René Scharfe [Thu, 20 Jan 2022 12:35:54 +0000 (13:35 +0100)]
branch,checkout: fix --track documentation
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
getcwd(mingw): handle the case when there is no cwd
A recent upstream topic introduced checks for certain Git commands that
prevent them from deleting the current working directory, introducing
also a regression test that ensures that commands such as `git version`
_can_ run without a current working directory.
While technically not possible on Windows via the regular Win32 API, we
do run the regression tests in an MSYS2 Bash which uses a POSIX
emulation layer (the MSYS2/Cygwin runtime) where a really evil hack
_does_ allow to delete a directory even if it is the current working
directory.
Therefore, Git needs to be prepared for a missing working directory,
even on Windows.
This issue was not noticed in upstream Git because there was no caller
that tried to discover a Git directory with a deleted current working
directory in the test suite. But in the microsoft/git fork, we do want
to run `pre-command`/`post-command` hooks for every command, even for
`git version`, which means that we make precisely such a call. The bug
is not in that `pre-command`/`post-command` feature, though, but in
`mingw_getcwd()` and needs to be addressed there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 19 Jan 2022 00:02:23 +0000 (16:02 -0800)]
Merge branch 'jc/freebsd-without-c99-only-build'
FreeBSD 13.0 headers have unconditional dependency on C11 language
features, and adding -std=gnu99 to DEVELOPER_CFLAGS would just
break the developer build.
* jc/freebsd-without-c99-only-build:
Makefile: FreeBSD cannot do C99-or-below build
Josh Steadmon [Tue, 18 Jan 2022 20:49:46 +0000 (12:49 -0800)]
branch,checkout: fix --track usage strings
As Ævar pointed out in [1], the use of PARSE_OPT_LITERAL_ARGHELP with a
list of allowed parameters is not recommended. Both git-branch and
git-checkout were changed in d311566 (branch: add flags and config to
inherit tracking, 2021-12-20) to use this discouraged combination for
their --track flags.
Fix this by removing PARSE_OPT_LITERAL_ARGHELP, and changing the arghelp
to simply be "mode". Users may discover allowed values in the manual
pages.
Junio C Hamano [Tue, 18 Jan 2022 17:47:39 +0000 (09:47 -0800)]
Makefile: FreeBSD cannot do C99-or-below build
In "make DEVELOPER=YesPlease" builds, we try to help developers to
catch as many potential issues as they can by using -Wall and
turning compilation warnings into errors. In the same spirit, we
recently started adding -std=gnu99 to their CFLAGS, so that they can
notice when they accidentally used language features beyond C99.
It however turns out that FreeBSD 13.0 mistakenly uses C11 extension
in its system header files regardless of what __STDC_VERSION__ says,
which means that the platform (unless we tweak their system headers)
cannot be used for this purpose.
It seems that -std=gnu99 is only added conditionally even in today's
config.mak.dev, so it is fine if we dropped -std=gnu99 from there.
Which means that developers on FreeBSD cannot participate in vetting
use of features beyond C99, but there are developers on other
platforms who will, so it's not too bad.
We might want a more "fundamental" fix to make the platform capable
of taking -std=gnu99, like working around the use of unconditional
C11 extension in its system header files by supplying a set of
"replacement" definitions in our header files. We chose not to
pursue such an approach for two reasons at this point:
(1) The fix belongs to the FreeBSD project, not this project, and
such an upstream fix may happen hopefully in a not-too-distant
future.
(2) Fixing such a bug in system header files and working it around
can lead to unexpected breakages (other parts of their system
header files may not be expecting to see and do not work well
with our "replacement" definitions). This close to the final
release of this cycle, we have no time for that.
Jiang Xin [Mon, 17 Jan 2022 00:50:41 +0000 (08:50 +0800)]
l10n: batch update to fix typo in branch.c
In git 2.35 l10n round 1, a space between two words was missing in the
message from "branch.c", and it was fixed by commit 68d924e1de (branch:
missing space fix at line 313, 2022-01-11).
Do a batch update for teams (bg, fr, id, sv, tr and zh_CN) that have
already completed their works on l10n round 1.
Jiang Xin [Mon, 17 Jan 2022 00:30:45 +0000 (08:30 +0800)]
Merge tag 'v2.35.0-rc1'
Git 2.35-rc1
* tag 'v2.35.0-rc1':
Git 2.35-rc1
reftable tests: avoid "int" overflow, use "uint64_t"
reftable: avoid initializing structs from structs
t1450-fsck: exec-bit is not needed to make loose object writable
refs API: use "failure_errno", not "errno"
Last minute fixes before -rc1
build: NonStop ships with an older zlib
packfile: fix off-by-one error in decoding logic
t/gpg: simplify test for unknown key
branch: missing space fix at line 313
fmt-merge-msg: prevent use-after-free with signed tags
cache.h: drop duplicate `ensure_full_index()` declaration
lazyload: use correct calling conventions
fetch: fix deadlock when cleaning up lockfiles in async signals
reftable tests: avoid "int" overflow, use "uint64_t"
Change code added in 1ae2b8cda84 (reftable: add merged table view,
2021-10-07) to consistently use the "uint64_t" type. These "min" and
"max" variables get passed in the body of this function to a function
whose prototype is:
[...] reftable_writer_set_limits([...], uint64_t min, uint64_t max
This avoids the following warning on SunCC 12.5 on
gcc211.fsffrance.org:
"reftable/merged_test.c", line 27: warning: initializer does not fit or is out of range: 0xffffffff
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Thu, 13 Jan 2022 20:28:45 +0000 (21:28 +0100)]
t1450-fsck: exec-bit is not needed to make loose object writable
A test case wants to append stuff to a loose object file to ensure
that this kind of corruption is detected. To make a read-only loose
object file writable with chmod, it is not necessary to also make
it executable. Replace the bitmask 755 with the instruction +w to
request only the write bit and to also heed the umask. And get rid
of a POSIXPERM prerequisite, which is unnecessary for the test.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a logic error in refs_resolve_ref_unsafe() introduced in a recent
series of mine to abstract the refs API away from errno. See 96f6623ada0 (Merge branch 'ab/refs-errno-cleanup', 2021-11-29)for that
series.
In that series introduction of "failure_errno" to
refs_resolve_ref_unsafe came in ef18119dec8 (refs API: add a version
of refs_resolve_ref_unsafe() with "errno", 2021-10-16). There we'd set
"errno = 0" immediately before refs_read_raw_ref(), and then set
"failure_errno" to "errno" if errno was non-zero afterwards.
Then in the next commit 8b72fea7e91 (refs API: make
refs_read_raw_ref() not set errno, 2021-10-16) we started expecting
"refs_read_raw_ref()" to set "failure_errno". It would do that if
refs_read_raw_ref() failed, but it wouldn't be the same errno.
So we might set the "errno" here to any arbitrary bad value, and end
up e.g. returning NULL when we meant to return the refname from
refs_resolve_ref_unsafe(), or the other way around. Instrumenting this
code will reveal cases where refs_read_raw_ref() will fail, and
"errno" and "failure_errno" will be set to different values.
In practice I haven't found a case where this scary bug changed
anything in practice. The reason for that is that we'll not care about
the actual value of "errno" here per-se, but only whether:
1. We have an errno
2. If it's one of ENOENT, EISDIR or ENOTDIR. See the adjacent code
added in a1c1d8170db (refs_resolve_ref_unsafe: handle d/f
conflicts for writes, 2017-10-06)
I.e. if we clobber "failure_errno" with "errno", but it happened to be
one of those three, and we'll clobber it with another one of the three
we were OK.
Perhaps there are cases where the difference ended up mattering, but I
haven't found them. Instrumenting the test suite to fail if "errno"
and "failure_errno" are different shows a lot of failures, checking if
they're different *and* one is but not the other is outside that list
of three "errno" values yields no failures.
But let's fix the obvious bug. We should just stop paying attention to
"errno" in refs_resolve_ref_unsafe(). In addition let's change the
partial resetting of "errno" in files_read_raw_ref() to happen just
before the "return", to ensure that any such bug will be more easily
spotted in the future.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fangyi Zhou [Tue, 11 Jan 2022 16:42:06 +0000 (16:42 +0000)]
l10n: zh_CN: v2.35.0 round 1
- Translate new messages
- Translate the word 'cone' instead of leaving it verbatim
(in the context of sparse checkout)
- Make translations of 'failed to' consistent
Signed-off-by: Fangyi Zhou <me@fangyi.io> Reviewed-by: Teng Long <dyroneteng@gmail.com> Reviewed-by: 依云 <lilydjwg@gmail.com> Reviewed-by: Jiang Xin <worldhello.net@gmail.com>
Junio C Hamano [Wed, 12 Jan 2022 20:11:42 +0000 (12:11 -0800)]
packfile: fix off-by-one error in decoding logic
shift count being exactly at 7-bit smaller than the long is OK; on
32-bit architecture, shift count starts at 4 and goes through 11, 18
and 25, at which point the guard triggers one iteration too early.
Reported-by: Marc Strapetz <marc.strapetz@syntevo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fabian Stelzer [Wed, 12 Jan 2022 12:07:57 +0000 (13:07 +0100)]
t/gpg: simplify test for unknown key
To test for a key that is completely unknown to the keyring we need one
to sign the commit with. This was done by generating a new key and not
add it into the keyring. To avoid the key generation overhead and
problems where GPG did hang in CI during it, switch GNUPGHOME to the
empty $GNUPGHOME_NOT_USED instead, therefore making all used keys unknown
for this single `verify-commit` call.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Fabian Stelzer <fs@gigacodes.de> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bagas Sanjaya [Tue, 11 Jan 2022 12:36:27 +0000 (19:36 +0700)]
branch: missing space fix at line 313
The message introduced by commit 593a2a5d06 (branch: protect branches
checked out in all worktrees, 2021-12-01) is missing a space in the
first line, add it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 10 Jan 2022 21:19:06 +0000 (16:19 -0500)]
fmt-merge-msg: prevent use-after-free with signed tags
When merging a signed tag, fmt_merge_msg_sigs() is responsible for
populating the body of the merge message with the names of the signed
tags, their signatures, and the validity of those signatures.
In 02769437e1 (ssh signing: use sigc struct to pass payload,
2021-12-09), check_signature() was taught to pass the object payload via
the sigc struct instead of passing the payload buffer separately.
In effect, 02769437e1 causes buf, and sigc.payload to point at the same
region in memory. This causes a problem for fmt_tag_signature(), which
wants to read from this location, since it is freed beforehand by
signature_check_clear() (which frees it via sigc's `payload` member).
That makes the subsequent use in fmt_tag_signature() a use-after-free.
As a result, merge messages did not contain the body of any signed tags.
Luckily, they tend not to contain garbage, either, since the result of
strstr()-ing the object buffer in fmt_tag_signature() is guarded:
const char *tag_body = strstr(buf, "\n\n");
if (tag_body) {
tag_body += 2;
strbuf_add(tagbuf, tag_body, buf + len - tag_body);
}
Unfortunately, the tests in t6200 did not catch this at the time because
they do not search for the body of signed tags in fmt-merge-msg's
output.
Resolve this by waiting to call signature_check_clear() until after its
contents can be safely discarded. Harden ourselves against any future
regressions in this area by making sure we can find signed tag messages
in the output of fmt-merge-msg, too.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 10 Jan 2022 19:52:56 +0000 (11:52 -0800)]
Merge branch 'ja/i18n-similar-messages'
Similar message templates have been consolidated so that
translators need to work on fewer number of messages.
* ja/i18n-similar-messages:
i18n: turn even more messages into "cannot be used together" ones
i18n: ref-filter: factorize "%(foo) atom used without %(bar) atom"
i18n: factorize "--foo outside a repository"
i18n: refactor "unrecognized %(foo) argument" strings
i18n: factorize "no directory given for --foo"
i18n: factorize "--foo requires --bar" and the like
i18n: tag.c factorize i18n strings
i18n: standardize "cannot open" and "cannot read"
i18n: turn "options are incompatible" into "cannot be used together"
i18n: refactor "%s, %s and %s are mutually exclusive"
i18n: refactor "foo and bar are mutually exclusive"
Junio C Hamano [Mon, 10 Jan 2022 19:52:54 +0000 (11:52 -0800)]
Merge branch 'js/branch-track-inherit'
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
Junio C Hamano [Mon, 10 Jan 2022 19:52:53 +0000 (11:52 -0800)]
Merge branch 'ab/usage-die-message'
Code clean-up to hide vreportf() from public API.
* ab/usage-die-message:
config API: use get_error_routine(), not vreportf()
usage.c + gc: add and use a die_message_errno()
gc: return from cmd_gc(), don't call exit()
usage.c API users: use die_message() for error() + exit 128
usage.c API users: use die_message() for "fatal :" + exit 128
usage.c: add a die_message() routine
Junio C Hamano [Mon, 10 Jan 2022 19:52:53 +0000 (11:52 -0800)]
Merge branch 'jz/apply-3-corner-cases'
"git apply --3way" bypasses the attempt to do a three-way
application in more cases to address the regression caused by the
recent change to use direct application as a fallback.
* jz/apply-3-corner-cases:
git-apply: skip threeway in add / rename cases
Junio C Hamano [Mon, 10 Jan 2022 19:52:52 +0000 (11:52 -0800)]
Merge branch 'ab/reflog-prep'
Code refactoring in the reflog part of refs API.
* ab/reflog-prep:
reflog + refs-backend: move "verbose" out of the backend
refs files-backend: assume cb->newlog if !EXPIRE_REFLOGS_DRY_RUN
reflog: reduce scope of "struct rev_info"
reflog expire: don't use lookup_commit_reference_gently()
reflog expire: refactor & use "tip_commit" only for UE_NORMAL
reflog expire: use "switch" over enum values
reflog: change one->many worktree->refnames to use a string_list
reflog expire: narrow scope of "cb" in cmd_reflog_expire()
reflog delete: narrow scope of "cmd" passed to count_reflog_ent()
Junio C Hamano [Mon, 10 Jan 2022 19:52:52 +0000 (11:52 -0800)]
Merge branch 'ab/do-not-limit-stash-help-to-push'
"git stash" by default triggers its "push" action, but its
implementation also made "git stash -h" to show short help only for
"git stash push", which has been corrected.
* ab/do-not-limit-stash-help-to-push:
stash: don't show "git stash push" usage on bad "git stash" usage
Junio C Hamano [Mon, 10 Jan 2022 19:52:51 +0000 (11:52 -0800)]
Merge branch 'hn/refs-debug-update'
Debugging support for refs API.
* hn/refs-debug-update:
refs: centralize initialization of the base ref_store.
refs: print error message in debug output
refs: pass gitdir to packed_ref_store_create
Junio C Hamano [Mon, 10 Jan 2022 19:52:50 +0000 (11:52 -0800)]
Merge branch 'hn/ref-api-tests-update'
Test updates.
* hn/ref-api-tests-update:
t7004: use "test-tool ref-store" for reflog inspection
t7004: create separate tags for different tests
t5550: require REFFILES
t5540: require REFFILES
Use of certain "git rev-list" options with "git fast-export"
created nonsense results (the worst two of which being "--reverse"
and "--invert-grep --grep=<foo>"). The use of "--first-parent" is
made to behave a bit more sensible than before.
* ws/fast-export-with-revision-options:
fast-export: fix surprising behavior with --first-parent
Certain sparse-checkout patterns that are valid in non-cone mode
led to segfault in cone mode, which has been corrected.
* ds/sparse-checkout-malformed-pattern-fix:
sparse-checkout: refuse to add to bad patterns
sparse-checkout: fix OOM error with mixed patterns
sparse-checkout: fix segfault on malformed patterns
Martin Ågren [Mon, 10 Jan 2022 18:41:34 +0000 (19:41 +0100)]
cache.h: drop duplicate `ensure_full_index()` declaration
There are two identical declarations of `ensure_full_index()` in
cache.h.
Commit 3964fc2aae ("sparse-index: add guard to ensure full index",
2021-03-30) provided an empty implementation of `ensure_full_index()`,
declaring it in a new file sparse-index.h. When commit 4300f8442a
("sparse-index: implement ensure_full_index()", 2021-03-30) fleshed out
the implementation, it added an identical declaration to cache.h.
Then 118a2e8bde ("cache: move ensure_full_index() to cache.h",
2021-04-01) favored having the declaration in cache.h. Because of the
double declaration, at that point we could have just dropped the one in
sparse-index.h, but instead it got moved to cache.h.
As a result, cache.h contains the exact same function declaration twice.
Drop the one under "/* Name hashing */", in favor of the one under
"/* Initialize and use the cache information */".
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Acked-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christoph Reiter reported on the Git for Windows issue tracker[1], that
mingw_strftime() imports strftime() from ucrtbase.dll with the wrong
calling convention. It should be __cdecl instead of WINAPI, which we
always use in DECLARE_PROC_ADDR().
The MSYS2 project encountered cmake sefaults on x86 Windows caused by
the same issue in the cmake source. [2] There are no known git crashes
that where caused by this, yet, but we should try to prevent them.
We import two other non-WINAPI functions via DECLARE_PROC_ADDR(), too.
Reported-By: Christoph Reiter <reiter.christoph@gmail.com> Signed-off-by: Matthias Aßhauer <mha1993@live.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: fix deadlock when cleaning up lockfiles in async signals
When fetching packfiles, we write a bunch of lockfiles for the packfiles
we're writing into the repository. In order to not leave behind any
cruft in case we exit or receive a signal, we register both an exit
handler as well as signal handlers for common signals like SIGINT. These
handlers will then unlink the locks and free the data structure tracking
them. We have observed a deadlock in this logic though:
(gdb) bt
#0 __lll_lock_wait_private () at ../sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:95
#1 0x00007f4932bea2cd in _int_free (av=0x7f4932f2eb20 <main_arena>, p=0x3e3e4200, have_lock=0) at malloc.c:3969
#2 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#3 0x0000000000662ab1 in string_list_clear ()
#4 0x000000000044f5bc in unlock_pack_on_signal ()
#5 <signal handler called>
#6 _int_free (av=0x7f4932f2eb20 <main_arena>, p=<optimized out>, have_lock=0) at malloc.c:4024
#7 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#8 0x000000000065afd5 in strbuf_release ()
#9 0x000000000066ddb9 in delete_tempfile ()
#10 0x0000000000610d0b in files_transaction_cleanup.isra ()
#11 0x0000000000611718 in files_transaction_abort ()
#12 0x000000000060d2ef in ref_transaction_abort ()
#13 0x000000000060d441 in ref_transaction_prepare ()
#14 0x000000000060e0b5 in ref_transaction_commit ()
#15 0x00000000004511c2 in fetch_and_consume_refs ()
#16 0x000000000045279a in cmd_fetch ()
#17 0x0000000000407c48 in handle_builtin ()
#18 0x0000000000408df2 in cmd_main ()
#19 0x00000000004078b5 in main ()
The process was killed with a signal, which caused the signal handler to
kick in and try free the data structures after we have unlinked the
locks. It then deadlocks while calling free(3P).
The root cause of this is that it is not allowed to call certain
functions in async-signal handlers, as specified by signal-safety(7).
Next to most I/O functions, this list of disallowed functions also
includes memory-handling functions like malloc(3P) and free(3P) because
they may not be reentrant. As a result, if we execute such functions in
the signal handler, then they may operate on inconistent state and fail
in unexpected ways.
Fix this bug by not calling non-async-signal-safe functions when running
in the signal handler. We're about to re-raise the signal anyway and
will thus exit, so it's not much of a problem to keep the string list of
lockfiles untouched. Note that it's fine though to call unlink(2), so
we'll still clean up the lockfiles correctly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 5 Jan 2022 22:01:30 +0000 (14:01 -0800)]
Merge branch 'rs/log-invert-grep-with-headers'
"git log --invert-grep --author=<name>" used to exclude commits
written by the given author, but now "--invert-grep" only affects
the matches made by the "--grep=<pattern>" option.
* rs/log-invert-grep-with-headers:
log: let --invert-grep only invert --grep
projects / thirdparty / git.git / log
