The description for `key_value_separator` incorrectly states that this
separator is inserted between trailer lines, which appears likely to
have been incorrectly copied from `separator` when this option was
added.
Update the description to correctly indicate that it is a separator that
appears between the key and the value of each trailer.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com> Acked-by: Linus Arver <linusa@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jean-Noël Avila [Sat, 6 Nov 2021 18:48:52 +0000 (19:48 +0100)]
doc: use only hyphens as word separators in placeholders
According to CodingGuidelines, multi-word placeholders should use
hyphens as word separators.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 12 Oct 2021 20:51:48 +0000 (13:51 -0700)]
Merge branch 'cb/cvsserver' into maint
"git cvsserver" had a long-standing bug in its authentication code,
which has finally been corrected (it is unclear and is a separate
question if anybody is seriously using it, though).
* cb/cvsserver:
Documentation: cleanup git-cvsserver
git-cvsserver: protect against NULL in crypt(3)
git-cvsserver: use crypt correctly to compare password hashes
Junio C Hamano [Tue, 12 Oct 2021 20:51:46 +0000 (13:51 -0700)]
Merge branch 'rs/no-mode-to-open-when-appending' into maint
The "mode" word is useless in a call to open(2) that does not
create a new file. Such a call in the files backend of the ref
subsystem has been cleaned up.
* rs/no-mode-to-open-when-appending:
refs/files-backend: remove unused open mode parameter
Junio C Hamano [Tue, 12 Oct 2021 20:51:45 +0000 (13:51 -0700)]
Merge branch 'tb/pack-finalize-ordering' into maint
The order in which various files that make up a single (conceptual)
packfile has been reevaluated and straightened up. This matters in
correctness, as an incomplete set of files must not be shown to a
running Git.
* tb/pack-finalize-ordering:
pack-objects: rename .idx files into place after .bitmap files
pack-write: split up finish_tmp_packfile() function
builtin/index-pack.c: move `.idx` files into place last
index-pack: refactor renaming in final()
builtin/repack.c: move `.idx` files into place last
pack-write.c: rename `.idx` files after `*.rev`
pack-write: refactor renaming in finish_tmp_packfile()
bulk-checkin.c: store checksum directly
pack.h: line-wrap the definition of finish_tmp_packfile()
Junio C Hamano [Tue, 12 Oct 2021 20:51:44 +0000 (13:51 -0700)]
Merge branch 'jc/trivial-threeway-binary-merge' into maint
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
Junio C Hamano [Tue, 12 Oct 2021 20:51:43 +0000 (13:51 -0700)]
Merge branch 'mh/send-email-reset-in-reply-to' into maint
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
Junio C Hamano [Tue, 12 Oct 2021 20:51:42 +0000 (13:51 -0700)]
Merge branch 'sg/set-ceiling-during-tests' into maint
Buggy tests could damage repositories outside the throw-away test
area we created. We now by default export GIT_CEILING_DIRECTORIES
to limit the damage from such a stray test.
* sg/set-ceiling-during-tests:
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
Junio C Hamano [Tue, 12 Oct 2021 20:51:41 +0000 (13:51 -0700)]
Merge branch 'cb/makefile-apple-clang' into maint
Build update for Apple clang.
* cb/makefile-apple-clang:
build: catch clang that identifies itself as "$VENDOR clang"
build: clang version may not be followed by extra words
build: update detect-compiler for newer Xcode version
Junio C Hamano [Tue, 12 Oct 2021 20:51:39 +0000 (13:51 -0700)]
Merge branch 'pw/rebase-r-fixes' into maint
Various bugs in "git rebase -r" have been fixed.
* pw/rebase-r-fixes:
rebase -r: fix merge -c with a merge strategy
rebase -r: don't write .git/MERGE_MSG when fast-forwarding
rebase -i: add another reword test
rebase -r: make 'merge -c' behave like reword
Junio C Hamano [Tue, 12 Oct 2021 20:51:39 +0000 (13:51 -0700)]
Merge branch 'pw/rebase-skip-final-fix' into maint
Checking out all the paths from HEAD during the last conflicted
step in "git rebase" and continuing would cause the step to be
skipped (which is expected), but leaves MERGE_MSG file behind in
$GIT_DIR and confuses the next "git commit", which has been
corrected.
* pw/rebase-skip-final-fix:
rebase --continue: remove .git/MERGE_MSG
rebase --apply: restore some tests
t3403: fix commit authorship
Junio C Hamano [Tue, 12 Oct 2021 20:51:38 +0000 (13:51 -0700)]
Merge branch 'jk/range-diff-fixes' into maint
"git range-diff" code clean-up.
* jk/range-diff-fixes:
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
Junio C Hamano [Tue, 12 Oct 2021 20:51:36 +0000 (13:51 -0700)]
Merge branch 'en/pull-conflicting-options' into maint
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Junio C Hamano [Tue, 12 Oct 2021 20:51:36 +0000 (13:51 -0700)]
Merge branch 'jt/push-negotiation-fixes' into maint
Bugfix for common ancestor negotiation recently introduced in "git
push" codepath.
* jt/push-negotiation-fixes:
fetch: die on invalid --negotiation-tip hash
send-pack: fix push nego. when remote has refs
send-pack: fix push.negotiate with remote helper
Junio C Hamano [Tue, 12 Oct 2021 20:51:27 +0000 (13:51 -0700)]
Merge branch 'js/maintenance-launchctl-fix' into maint
"git maintenance" scheduler fix for macOS.
* js/maintenance-launchctl-fix:
maintenance: skip bootout/bootstrap when plist is registered
maintenance: create `launchctl` configuration using a lock file
Junio C Hamano [Tue, 12 Oct 2021 20:51:24 +0000 (13:51 -0700)]
Merge branch 'fc/completion-updates' into maint
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
Junio C Hamano [Tue, 12 Oct 2021 20:51:22 +0000 (13:51 -0700)]
Merge branch 'en/merge-strategy-docs' into maint
Documentation updates.
* en/merge-strategy-docs:
Update error message and code comment
merge-strategies.txt: add coverage of the `ort` merge strategy
git-rebase.txt: correct out-of-date and misleading text about renames
merge-strategies.txt: fix simple capitalization error
merge-strategies.txt: avoid giving special preference to patience algorithm
merge-strategies.txt: do not imply using copy detection is desired
merge-strategies.txt: update wording for the resolve strategy
Documentation: edit awkward references to `git merge-recursive`
directory-rename-detection.txt: small updates due to merge-ort optimizations
git-rebase.txt: correct antiquated claims about --rebase-merges
Andrzej Hunt [Sun, 26 Sep 2021 15:58:33 +0000 (15:58 +0000)]
connect: also update offset for features without values
parse_feature_value() takes an offset, and uses it to seek past the
point in features_list that we've already seen. However if the feature
being searched for does not specify a value, the offset is not
updated. Therefore if we call parse_feature_value() in a loop on a
value-less feature, we'll keep on parsing the same feature over and over
again. This usually isn't an issue: there's no point in using
next_server_feature_value() to search for repeated instances of the same
capability unless that capability typically specifies a value - but a
broken server could send a response that omits the value for a feature
even when we are expecting a value.
Therefore we add an offset update calculation for the no-value case,
which helps ensure that loops using next_server_feature_value() will
always terminate.
next_server_feature_value(), and the offset calculation, were first
added in 2.28 in 2c6a403d96 (connect: add function to parse multiple
v1 capability values, 2020-05-25).
Thanks to Peff for authoring the test.
Co-authored-by: Jeff King <peff@peff.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Andrzej Hunt <andrzej@ahunt.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Aguilar [Thu, 23 Sep 2021 04:12:50 +0000 (21:12 -0700)]
difftool: fix symlink-file writing in dir-diff mode
The difftool dir-diff mode handles symlinks by replacing them with their
readlink(2) values. This allows diff tools to see changes to symlinks
as if they were regular text diffs with the old and new path values.
This is analogous to what "git diff" displays when symlinks change.
The temporary diff directories that are created initially contain
symlinks because they get checked-out using a temporary index that
retains the original symlinks as checked-in to the repository.
A bug was introduced when difftool was rewritten in C that made
difftool write the readlink(2) contents into the pointed-to file rather
than the symlink itself. The write was going through the symlink and
writing to its target rather than writing to the symlink path itself.
Replace symlinks with raw text files by unlinking the symlink path
before writing the readlink(2) content into them.
When 18ec800512 (difftool: handle modified symlinks in dir-diff mode,
2017-03-15) added handling for modified symlinks this bug got recorded
in the test suite. The tests included the pointed-to symlink target
paths. These paths were being reported because difftool was erroneously
writing to them, but they should have never been reported nor written.
Correct the modified-symlinks test cases by removing the target files
from the expected output.
Add a test to ensure that symlinks are written with the readlink(2)
values and that the target files contain their original content.
Reported-by: Alan Blotz <work@blotz.org> Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Sep 2021 22:11:53 +0000 (18:11 -0400)]
http: match headers case-insensitively when redacting
When HTTP/2 is in use, we fail to correctly redact "Authorization" (and
other) headers in our GIT_TRACE_CURL output.
We get the headers in our CURLOPT_DEBUGFUNCTION callback, curl_trace().
It passes them along to curl_dump_header(), which in turn checks
redact_sensitive_header(). We see the headers as a text buffer like:
Host: ...
Authorization: Basic ...
After breaking it into lines, we match each header using skip_prefix().
This is case-sensitive, even though HTTP headers are case-insensitive.
This has worked reliably in the past because these headers are generated
by curl itself, which is predictable in what it sends.
But when HTTP/2 is in use, instead we get a lower-case "authorization:"
header, and we fail to match it. The fix is simple: we should match with
skip_iprefix().
Testing is more complicated, though. We do have a test for the redacting
feature, but we don't hit the problem case because our test Apache setup
does not understand HTTP/2. You can reproduce the issue by applying this
on top of the test change in this patch:
- it's not necessarily portable. The http2 apache module might not be
available on all systems. Further, the http2 module isn't compatible
with the prefork mpm, so we have to switch to something else. But we
don't necessarily know what's available. It would be nice if we
could have conditional config, but IfModule only tells us if a
module is already loaded, not whether it is available at all.
This might be a non-issue. The http tests are already optional, and
modern-enough systems may just have both of these. But...
- if we do this, then we'd no longer be testing HTTP/1.1 at all. I'm
not sure how much that matters since it's all handled by curl under
the hood, but I'd worry that some detail leaks through. We'd
probably want two scripts running similar tests, one with HTTP/2 and
one with HTTP/1.1.
- speaking of which, a later test fails with the patch above! The
problem is that it is making sure we used a chunked
transfer-encoding by looking for that header in the trace. But
HTTP/2 doesn't support that, as it has its own streaming mechanisms
(the overall operation works fine; we just don't see the header in
the trace).
Furthermore, even with the changes above, this test still does not
detect the current failure, because we see _both_ HTTP/1.1 and HTTP/2
requests, which confuse it. Quoting only the interesting bits from the
resulting trace file, we first see:
So the client does properly redact there, because we're speaking
HTTP/1.1, and the server indicates it can do the upgrade. And then the
client will make further requests using HTTP/2:
And there we can see that the credential is _not_ redacted. This part of
the test is what gets confused:
# Ensure that there is no "Basic" followed by a base64 string, but that
# the auth details are redacted
! grep "Authorization: Basic [0-9a-zA-Z+/]" trace &&
grep "Authorization: Basic <redacted>" trace
The first grep does not match the un-redacted HTTP/2 header, because
it insists on an uppercase "A". And the second one does find the
HTTP/1.1 header. So as far as the test is concerned, everything is OK,
but it failed to notice the un-redacted lines.
We can make this test (and the other related ones) more robust by adding
"-i" to grep case-insensitively. This isn't really doing anything for
now, since we're not actually speaking HTTP/2, but it future-proofs the
tests for a day when we do (either we add explicit HTTP/2 test support,
or it's eventually enabled by default by our Apache+curl test setup).
And it doesn't hurt in the meantime for the tests to be more careful.
The change to use "grep -i", coupled with the changes to use HTTP/2
shown above, causes the test to fail with the current code, and pass
after this patch is applied.
And finally, there's one other way to demonstrate the issue (and how I
actually found it originally). Looking at GIT_TRACE_CURL output against
github.com, you'll see the unredacted output, even if you didn't set
http.version. That's because setting it is only necessary for curl to
send the extra headers in its HTTP/1.1 request that say "Hey, I speak
HTTP/2; upgrade if you do, too". But for a production site speaking
https, the server advertises via ALPN, a TLS extension, that it supports
HTTP/2, and the client can immediately start using it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: clean .depend dirs under COMPUTE_HEADER_DEPENDENCIES != yes
Fix a logic error in dfea575017d (Makefile: lazily compute header
dependencies, 2010-01-26) where we'd make whether we cleaned the
.depend dirs contingent on the currently configured
COMPUTE_HEADER_DEPENDENCIES value. Before this running e.g.:
make COMPUTE_HEADER_DEPENDENCIES=yes grep.o
make COMPUTE_HEADER_DEPENDENCIES=no clean
Would leave behind the .depend directory, now it'll be removed.
Normally we'd need to use another variable, but in this case there's
no other uses of $(dep_dirs), as opposed to $(dep_args) which is used
as an argument to $(CC). So just deleting this line makes everything
work correctly.
See http://lore.kernel.org/git/xmqqmto48ufz.fsf@gitster.g for a report
about this issue.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 20 Sep 2021 19:04:10 +0000 (15:04 -0400)]
clone: handle unborn branch in bare repos
When cloning a repository with an unborn HEAD, we'll set the local HEAD
to match it only if the local repository is non-bare. This is
inconsistent with all other combinations:
remote HEAD | local repo | local HEAD
-----------------------------------------------
points to commit | non-bare | same as remote
points to commit | bare | same as remote
unborn | non-bare | same as remote
unborn | bare | local default
So I don't think this is some clever or subtle behavior, but just a bug
in 4f37d45706 (clone: respect remote unborn HEAD, 2021-02-05). And it's
easy to see how we ended up there. Before that commit, the code to set
up the HEAD for an empty repo was guarded by "if (!option_bare)". That's
because the only thing it did was call install_branch_config(), and we
don't want to do so for a bare repository (unborn HEAD or not).
That commit put the handling of unborn HEADs into the same block, since
those also need to call install_branch_config(). But the unborn case has
an additional side effect of calling create_symref(), and we want that
to happen whether we are bare or not.
This patch just pulls all of the "figure out the default branch" code
out of the "!option_bare" block. Only the actual config installation is
kept there.
Note that this does mean we might allocate "ref" and not use it (if the
remote is empty but did not advertise an unborn HEAD). But that's not
really a big deal since this isn't a hot code path, and it keeps the
code simple. The alternative would be handling unborn_head_target
separately, but that gets confusing since its memory ownership is
tangled up with the "ref" variable.
There's just one new test, for the case we're fixing. The other ones in
the table are handled elsewhere (the unborn non-bare case just above,
and the actually-born cases in t5601, t5606, and t5609, as they do not
require v2's "unborn" protocol extension).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of crypt(3) will return NULL when passed an unsupported
hash type (ex: OpenBSD with DES), so check for undef instead of using
it directly.
Also use this to probe the system and select a better hash function in
the tests, so it can pass successfully.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
[jc: <CAPUEspjqD5zy8TLuFA96usU7FYi=0wF84y7NgOVFqegtxL9zbw@mail.gmail.com>] Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsserver: use crypt correctly to compare password hashes
c057bad370 (git-cvsserver: use a password file cvsserver pserver,
2010-05-15) adds a way for `git cvsserver` to provide authenticated
pserver accounts without having clear text passwords, but uses the
username instead of the password to the call for crypt(3).
Correct that, and make sure the documentation correctly indicates how
to obtain hashed passwords that could be used to populate this
configuration, as well as correcting the hash that was used for the
tests.
This change will require that any user of this feature updates the
hashes in their configuration, but has the advantage of using a more
similar format than cvs uses, probably also easying any migration.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
9af0b8dbe2 (t0000-basic: more commit-tree tests., 2006-04-26) adds
tests for commit-tree that mask the return exit from git as described
in a378fee5b07 (Documentation: add shell guidelines, 2018-10-05).
Fix the tests, to avoid pipes by using a temporary file instead.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
b8ba412bf7 (tree-diff: avoid alloca for large allocations, 2016-06-07)
adds a way to route some bigger allocations out of the stack and free
them through the addition of two conveniently named macros, but leaves
the calls to free the xalloca part, which could be also in the heap,
if the system doesn't HAVE_ALLOCA_H (ex: macOS and other BSD).
Add the missing free call, xalloca_free(), which is a noop if we
allocated memory in the stack frame, but a real free() if we
allocated in the heap instead, and while at it, change the expression
to match in both macros for ease of readability.
This avoids a leak reported by LSAN while running t0000 but that
wouldn't fail the test (which is fixed in the next patch):
SUMMARY: LeakSanitizer: 1034 byte(s) leaked in 15 allocation(s).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 15 Sep 2021 17:24:52 +0000 (13:24 -0400)]
t1400: avoid SIGPIPE race condition on fifo
t1400.190 sometimes fails or even hangs because of the way it uses
fifos. Our goal is to interactively read and write lines from
update-ref, so we have two fifos, in and out. We open a descriptor
connected to "in" and redirect output to that, so that update-ref does
not see EOF as it would if we opened and closed it for each "echo" call.
But we don't do the same for the output. This leads to a race where our
"read response <out" has not yet opened the fifo, but update-ref tries
to write to it and gets SIGPIPE. This can result in the test failing, or
worse, hanging as we wait forever for somebody to write to the pipe.
This is the same proble we fixed in 4783e7ea83 (t0008: avoid SIGPIPE
race condition on fifo, 2013-07-12), and we can fix it the same way, by
opening a second long-running descriptor.
Before this patch, running:
./t1400-update-ref.sh --run=1,190 --stress
failed or hung within a few dozen iterations. After it, I ran it for
several hundred without problems.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
documentation: add documentation for 'git version'
While 'git version' is probably the least complex git command,
it is a non-experimental user-facing builtin command. As such
it should have a help page.
Both `git help` and `git version` can be called as options
(`--help`/`--version`) that internally get converted to the
corresponding command. Add a small paragraph to
Documentation/git.txt describing how these two options
interact with each other and link to this help page for the
sub-options that `--version` can take. Well, currently there
is only one sub-option, but that could potentially increase
in future versions of Git.
Signed-off-by: Matthias Aßhauer <mha1993@live.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philip Oakley [Mon, 13 Sep 2021 21:23:05 +0000 (22:23 +0100)]
doc: config, tell readers of `git help --config`
The `git help` command gained the ability to list config variables in 3ac68a93fd (help: add --config to list all available config, 2018-05-26)
but failed to tell readers of the config documenation itself.
Provide that cross reference.
Signed-off-by: Philip Oakley <philipoakley@iee.email> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 11 Sep 2021 15:01:16 +0000 (11:01 -0400)]
strvec: use size_t to store nr and alloc
We converted argv_array (which later became strvec) to use size_t in 819f0e76b1 (argv-array: use size_t for count and alloc, 2020-07-28) in
order to avoid the possibility of integer overflow. But later, commit d70a9eb611 (strvec: rename struct fields, 2020-07-28) accidentally
converted these back to ints!
Those two commits were part of the same patch series. I'm pretty sure
what happened is that they were originally written in the opposite order
and then cleaned up and re-ordered during an interactive rebase. And
when resolving the inevitable conflict, I mistakenly took the "rename"
patch completely, accidentally dropping the type change.
We can correct it now; better late than never.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 11 Sep 2021 11:45:43 +0000 (13:45 +0200)]
compression: drop write-only core_compression_* variables
Since 8de7eeb54b (compression: unify pack.compression configuration
parsing, 2016-11-15) the variables core_compression_level and
core_compression_seen are only set, but never read. Remove them.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
