core: order timer units after both time-sync.target and time-set.target
If users do not enable a service like systemd-time-wait-sync.target
(because they don't want to delay boot for external events, such as an
NTP sync), then timers should still take the the weaker time-set.target
feature into account, so that the clock is at least monotonic.
Hence, order timer units after both of the targets: time-sync.target
*and* time-set.target. That way, the right thing will happen regardless
if people have no NTP server (and thus also no
systemd-time-wait-sync.service or equivalent) or, only have an NTP
server (and no systemd-time-wait-sync.service), or have both.
Ordering after time-set.target is basically "free". The logic it is
backed by should be instant, without communication with the outside
going on. It's useful still so that time servers that implement the
timestamp from /var/ logic can run in later boot.
units: don't pull in time-sync.target from systemd-timesyncd.service
systemd-timesyncd.service only applies the much weaker monotonic clock
from file logic, i.e should pull in and order itself before
time-set.target. The strong time-sync.target unit is pulled in by
systemd-time-wait-sync.service.
So the currentl and only fd_is_mount_point() check is actually entirely
bogus: it passes "/" as filename argument, but that's not actually a
a valid filename, but an absolute path.
fd_is_mount_point() is written in a way tha the fd refers to a directory
and the specified path is a file directly below it that shall be
checked. The test call actually violated that rule, but still expected
success.
Let's fix this, and check for this explicitly, and refuse it.
Let's extend the test and move it to test-mountpoint-util.c where the
rest of the tests for related calls are placed.
tree-wide: suggest meson command lines instead of ninja ones
This only changes documentation. In various places we call "ninja"
directly. I figured it would be safer to leave those in place for now,
given the meson replacement commands lines appears to be supported in
newer meson versions only.
Bastien Nocera [Wed, 2 Dec 2020 11:40:42 +0000 (12:40 +0100)]
udev: Extract RAM properties from DMI information
Add memory_id program to set properties about the physical memory
devices in the system. This is useful on machines with removable memory
modules to show how the machine can be upgraded, and on all devices to
detect the actual RAM size, without relying on the OS accessible amount.
test-login: skip consistency checks when logind is not active
There are two ways in swich sd_login_* functions acquire data:
some are derived from the cgroup path, but others use the data serialized
by logind.
When the tests are executed under Fedora's mock, without systemd-spawn
but instead in a traditional chroot, test-login gets confused:
the "outside" cgroup path is visible, so sd_pid_get_unit() and
sd_pid_get_session() work, but sd_session_is_active() and other functions
that need logind data fail.
Such a buildroot setup is fairly bad, but it can be encountered in the wild, so
let's just skip the tests in that case.
/* Information printed is from the live system */
sd_pid_get_unit(0, …) → "session-237.scope"
sd_pid_get_user_unit(0, …) → "n/a"
sd_pid_get_slice(0, …) → "user-1000.slice"
sd_pid_get_session(0, …) → "237"
sd_pid_get_owner_uid(0, …) → 1000
sd_pid_get_cgroup(0, …) → "/user.slice/user-1000.slice/session-237.scope"
sd_uid_get_display(1000, …) → "(null)"
sd_uid_get_sessions(1000, …) → [0] ""
sd_uid_get_seats(1000, …) → [0] ""
Assertion 'r >= 0' failed at src/libsystemd/sd-login/test-login.c:104, function test_login(). Aborting.
Devon Pringle [Mon, 14 Dec 2020 04:22:18 +0000 (14:22 +1000)]
networkd: handle ignoring ll gateway being link ll
In the event where network discovery gets a route with the gateway being
the interfaces local link address, networkd will fail the interface.
systemd-networkd[44319]: br_lan: Configuring route: dst: fdcd:41a4:5559:ec03::/64, src: n/a, gw: fe80::e4da:7eff:fe77:5c5e, prefsrc: n/a, scope: global, table: main, proto: ra, type: unicast
systemd-networkd[44319]: br_lan: Could not set NDisc route or address: Gateway can not be a local address. Invalid argument
systemd-networkd[44319]: br_lan: Failed
systemd-networkd[44319]: br_lan: State changed: configuring -> failed
This patch, instead of allowing the interface to fail, will instead log
the event and skip setting the route.
Frantisek Sumsal [Wed, 16 Dec 2020 15:33:50 +0000 (16:33 +0100)]
test: drop the trailing whitespace from the QEMU version check
I suspect the original version of the regex was written on a system,
which prints both the QEMU version and the QEMU package version in the
--version output, like Fedora:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 4.2.1 (qemu-4.2.1-1.fc32)
Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers
However, Arch Linux prints only the QEMU version:
$ /bin/qemu-system-x86_64 --version
QEMU emulator version 5.2.0
Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers
This causes the awk regex to not match the version string, since there's
no whitespace after it, causing the version check to fail (as well as the
TEST-36-NUMAPOLICY) as well.
hostnamed,shared/hostname-setup: expose the origin of the current hostname
In hostnamed this is exposed as a dbus property, and in the logs in both
places.
This is of interest to network management software and such: if the fallback
hostname is used, it's not as useful as the real configured thing. Right now
various programs try to guess the source of hostname by looking at the string.
E.g. "localhost" is assumed to be not the real hostname, but "fedora" is. Any
such attempts are bound to fail, because we cannot distinguish "fedora" (a
fallback value set by a distro), from "fedora" (received from reverse dns),
from "fedora" read from /etc/hostname.
/run/systemd/fallback-hostname is written with the fallback hostname when
either pid1 or hostnamed sets the kernel hostname to the fallback value. Why
remember the fallback value and not the transient hostname in /run/hostname
instead?
We have three hostname types: "static", "transient", fallback".
– Distinguishing "static" is easy: the hostname that is set matches what
is in /etc/hostname.
– Distingiushing "transient" and "fallback" is not easy. And the
"transient" hostname may be set outside of pid1+hostnamed. In particular,
it may be set by container manager, some non-systemd tool in the initramfs,
or even by a direct call. All those mechanisms count as "transient". Trying
to get those cases to write /run/hostname is futile. It is much easier to
isolate the "fallback" case which is mostly under our control.
And since the file is only used as a flag to mark the hostname as fallback,
it can be hidden inside of our /run/systemd directory.
For https://bugzilla.redhat.com/show_bug.cgi?id=1892235.
hostnamed: stop discriminating against "localhost" in /etc/hostname
We would sometimes ignore localhost-style names in /etc/hostname. That is
brittle. If the user configured some hostname, it's most likely because they
want to use that as the hostname. If they don't want to use such a hostname,
they should just not create the config. Everything becomes simples if we just
use the configured hostname as-is.
This behaviour seems to have been a workaround for Anaconda installer and other
tools writing out /etc/hostname with the default of "localhost.localdomain".
Anaconda PR to stop doing that: https://github.com/rhinstaller/anaconda/pull/3040.
That might have been useful as a work-around for other programs misbehaving if
/etc/hostname was not present, but nowadays it's not useful because systemd
mostly controls the hostname and it is perfectly happy without that file.
Apart from making things simpler, this allows users to set a hostname like
"localhost" and have it honoured, if such a whim strikes them.
shared/hostname-setup: leave the terminator byte alone
gethostname(3) says it's unspecified whether the string is properly terminated
when the hostname is too long. We created a buffer with one extra byte, and it
seems the intent was to let that byte serve as terminator even if we get an
unterminated string from gethostname().
Move hostname setup logic to new shared/hostname-setup.[ch]
No functional change, just moving a bunch of things around. Before
we needed a rather complicated setup to test hostname_setup(), because
the code was in src/core/. When things are moved to src/shared/
we can just test it as any function.
The test is still "unsafe" because hostname_setup() may modify the
hostname.
hostnamed: expose the fallback-hostname setting as a const dbus property
Various users want to know what the fallback hostname is. Since it was made
configurable in 8146c32b9264a6915d467a5cab1a24311fbede7e, we didn't expose this
nicely.
man/hostnamectl,hostaned,hostname1: adjust the docs to match reality
The semantics were significantly changed in c779a44222161155c039a7fd2fd304c006590ac7
("hostnamed: Fix the way that static and transient host names interact", Feb. 2014),
but when the dbus api documentation was imported much later, it wasn't properly
adjusted to describe those new semantics.
Let's ove various bits and pieces around so that they are in more appropriate
places. Drop recommendations to set the hostname for DHCP or mDNS purposes.
Nowadays we expect tools that want to expose some different hostname to the
outside to manage that internally without affecting visible state. Also drop
mentions of DHCP or mDNS directly setting the hostname, since nowadays network
management software is expected to (and does) go through hostnamed.
Also, add a high-level description of semantics. It glosses over the details of
handling of localhost-style names. Later commits will remove this special handling
anyway.
Florian Westphal [Mon, 16 Nov 2020 10:15:31 +0000 (11:15 +0100)]
firewall-util-nft: attempt table recreation when add operation fails
When someone runs 'nft flush ruleset' in the same net namespace
this will also tear down the systemd nat table.
Unlike iptables -t nat -F, which will remove all rules added by
the systemd iptables backend, iptables has builtin chains that cannot
be deleted. IOW, the next add operation will 'just work'.
In the nftables case however, the entire table gets removed.
When the systemd nat table is removed by an external entity next
attempt to add a set element will yield -ENOENT.
If this happens, recreate the table, and, if successful, re-do
the add operation.
Note that this doesn't protect against external sabotage such as
a running 'while true; nft flush ruleset;done'. However, there is
nothing that could be done short of extending the kernel to allow
tables to be "frozen" or otherwise tied to a process such as
systemd-networkd.
Florian Westphal [Fri, 19 Jun 2020 13:53:03 +0000 (15:53 +0200)]
firewall-util: add nftables backend
Idea is to use a static ruleset, added when the first attempt to
add a masquerade or dnat rule is made.
The alternative would be to add the ruleset when the init function is called.
The disadvantage is that this enables connection tracking and NAT in the kernel
(as the ruleset needs this to work), which comes with some overhead that might
not be needed (no nspawn usage and no IPMasquerade option set).
There is no additional dependency on the 'nft' userspace binary or other libraries.
sd-netlinks nfnetlink backend is used to modify the nftables ruleset.
The commit message/comments still use nft syntax since that is what
users will see when they use the nft tool to list the ruleset.
The added initial skeleton (added on first fw_add_masquerade/local_dnat
call) looks like this:
table ip io.systemd.nat {
set masq_saddr {
type ipv4_addr
flags interval
elements = { 192.168.59.160/28 }
}
chain prerouting {
type nat hook prerouting priority dstnat + 1; policy accept;
fib daddr type local dnat ip addr . port to meta l4proto . th dport map @map_port_ipport
}
chain output {
type nat hook output priority -99; policy accept;
ip daddr != 127.0.0.0/8 oif "lo" dnat ip addr . port to meta l4proto . th dport map @map_port_ipport
}
chain postrouting {
type nat hook postrouting priority srcnat + 1; policy accept;
ip saddr @masq_saddr masquerade
}
}
Next calls to fw_add_masquerade/add_local_dnat will then only add/delete the
element/mapping to masq_saddr and map_port_ipport, i.e. the ruleset doesn't
change -- only the set/map content does.
Running test-firewall-util with this backend gives following output
on a parallel 'nft monitor':
$ nft monitor
add table ip io.systemd.nat
add chain ip io.systemd.nat prerouting { type nat hook prerouting priority dstnat + 1; policy accept; }
add chain ip io.systemd.nat output { type nat hook output priority -99; policy accept; }
add chain ip io.systemd.nat postrouting { type nat hook postrouting priority srcnat + 1; policy accept; }
add set ip io.systemd.nat masq_saddr { type ipv4_addr; flags interval; }
add map ip io.systemd.nat map_port_ipport { type inet_proto . inet_service : ipv4_addr . inet_service; }
add rule ip io.systemd.nat prerouting fib daddr type local dnat ip addr . port to meta l4proto . th dport map @map_port_ipport
add rule ip io.systemd.nat output ip daddr != 127.0.0.0/8 fib daddr type local dnat ip addr . port to meta l4proto . th dport map @map_port_ipport
add rule ip io.systemd.nat postrouting ip saddr @masq_saddr masquerade
add element ip io.systemd.nat masq_saddr { 10.1.2.3 }
add element ip io.systemd.nat masq_saddr { 10.0.2.0/28 }
delete element ip io.systemd.nat masq_saddr { 10.0.2.0/28 }
delete element ip io.systemd.nat masq_saddr { 10.1.2.3 }
add element ip io.systemd.nat map_port_ipport { tcp . 4711 : 1.2.3.4 . 815 }
delete element ip io.systemd.nat map_port_ipport { tcp . 4711 : 1.2.3.4 . 815 }
add element ip io.systemd.nat map_port_ipport { tcp . 4711 : 1.2.3.5 . 815 }
delete element ip io.systemd.nat map_port_ipport { tcp . 4711 : 1.2.3.5 . 815 }
CTRL-C
Things not implemented/supported:
1. Change monitoring. The kernel allows userspace to learn about changes
made by other clients (using nfnetlink notifications). It would be
possible to detect when e.g. someone removes the systemd nat table.
This would need more work. Its also not clear on how to react to
external changes -- it doesn't seem like a good idea to just auto-undo
everthing.
2. 'set masq_saddr' doesn't handle overlaps.
Example:
With the iptables backend the second call works, as it adds an
independent iptables rule.
With the nftables backend, the range 10.0.0.0-10.255.255.255 clashes with
the existing range of 10.0.0.0-10.0.255.255 so 2nd add gets rejected by the
kernel.
This will generate an error message from networkd ("Could not enable IP
masquerading: File exists").
To resolve this it would be needed to either keep track of the added elements
and perform range merging when overlaps are detected.
However, the add erquests are done using the configured network on a
device, so no overlaps should occur in normal setups.
Florian Westphal [Fri, 19 Jun 2020 12:42:31 +0000 (14:42 +0200)]
sd-netlink: add nfnetlink helper routines
add nfnetlink_nftables helper functions to:
* open a new nfnetlink socket to kernel
* add tables, chains, rules, sets and maps
* delete/flush table
* add and delete elements from sets/maps
- open/close a new nfnetlink socket for every operation
- keep a nfnetlink socket open internally
- expose a opaque fw_ctx and stash all internal data here.
Originally I opted for the 2nd option, but during review it was
suggested to avoid static storage duration because of perceived
problems with threaded applications.
This adds fw_ctx and new/free functions, then converts the existing api
and nspawn and networkd to use it.
Florian Westphal [Tue, 13 Oct 2020 18:29:09 +0000 (20:29 +0200)]
nspawn: pass userdata pointer, not inet_addr union
Next patch will need to pass two pointers to the callback instead
of just the addr mask. Caller will pass a compound structure, so
make this 'void *userdata' to de-clutter the next patch.
Florian Westphal [Thu, 25 Jun 2020 13:00:54 +0000 (15:00 +0200)]
firewall-util: prepare for alternative to iptables backend
In a nutshell:
1. git mv firewall-util.c firewall-util-iptables.c
2. existing external functions gain _iptables_ in their names
3. firewall-util.c provides old function names
4. build system always compiles firewall-util.c,
firewall-util-iptables.c is conditional instead (libiptc).
5. On first call to any of the 'old' API functions performs
a probe that should return the preferred backend.
In a future step, can add firewall-util-FOOTYPE.c, add its
probe function to firewall-util.c and then have calls to
fw_add_masq/local_dnat handed to the detected backend.
For now, only iptables backend exists, and no special probing
takes place for it, i.e. when systemd was built with iptables,
that will be used. If not, requets to add masquerade/dnat will
fail with same error (-EOPNOTSUPP) as before this change.
For reference, the rules added by the libiptc/iptables backend look like this:
for service export (via systemd-nspawn):
[0:0] -A PREROUTING -p tcp -m tcp --dport $exportedport -m addrtype --dst-type LOCAL -j DNAT --to-destination $containerip:$port
[0:0] -A OUTPUT ! -d 127.0.0.0/8 -p tcp -m tcp --dport $exportedport -m addrtype --dst-type LOCAL -j DNAT --to-destination $containerip:$port
for ip masquerade:
[0:0] -A POSTROUTING -s network/prefix -j MASQUERADE
Florian Westphal [Wed, 24 Jun 2020 09:55:14 +0000 (11:55 +0200)]
firewall-util: reject NULL source or address with prefixlen 0
Make sure we don't add masquerading rules without a explicitly
specified network range we should be masquerading for.
The only caller aside from test case is
networkd-address.c which never passes a NULL source.
As it also passes the network prefix, that should always be > 0 as well.
This causes expected test failure:
Failed to modify firewall: Invalid argument
Failed to modify firewall: Invalid argument
Failed to modify firewall: Invalid argument
Failed to modify firewall: Protocol not available
Failed to modify firewall: Protocol not available
Failed to modify firewall: Protocol not available
Failed to modify firewall: Protocol not available
The failing test cases are amended to expect failure on
NULL source or prefix instead of success.
Upgrading to qemu 5.2 breaks TEST-36-NUMAPOLICY like:
qemu-system-x86_64: total memory for NUMA nodes (0x0) should
equal RAM size (0x20000000)
Use the new (as in >=2014) form of memdev in test 36:
-object memory-backend-ram,id=mem0,size=512M -numa node,memdev=mem0,nodeid=0
Since some target systems are as old as qemu 1.5.3 (CentOS7) but the new
kind to specify was added in qemu 2.1 this needs to add version parsing and
add the argument only when qemu is >=5.2.
Fixes #17986.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
rnhmjoj [Sun, 22 Nov 2020 01:37:27 +0000 (02:37 +0100)]
basic/term-util: extend $SYSTEMD_COLORS
This commit extends $SYSTEMD_COLORS to an enum variable (compared to
a simple boolean) which specifies the "colors mode". This means that, in
addition to disabling colors altogether, it's now possible to restrict
the console output to 16 or 256 colors only.
bus-util: improve logging when we can't connect to the bus
Previously, we'd already have explicit logging for the case where
$XDG_RUNTIME_DIR is not set. Let's also add some explicit logging for
the EPERM/ACCESS case. Let's also in both cases suggest the
--machine=<user>@.host syntax.
And while we are at it, let's remove side-effects from the macro.
By checking for both the EPERM/EACCES case and the $XDG_RUNTIME_DIR case
we will now catch both the cases where people use "su" to issue a
"systemctl --user" operation, and those where they (more correctly, but
still not good enough) call "su -".
So far, the bridge always acted as if "--system" was used, i.e. would
unconditionally connect to the system bus. Let's add "--user" too, to
connect to the users session bus.
This is mostly for completeness' sake.
I wanted to use this when making sd-bus's ability to connect to other
user's D-Bus busses work, but it didn't exist so far. In the interest of
keeping things compatible the implementation in sd-bus will not use the
new "--user" switch, and instead manually construct the right bus path
via "--path=", but we still should add the proper switches, as
preparation for a brighter future, one day.
sd-bus: add API for connecting to a specific user's user bus of a specific container
This is unfortunately harder to implement than it sounds. The user's bus
is bound a to the user's lifecycle after all (i.e. only exists as long
as the user has at least one PAM session), and the path dynamically (at
least theoretically, in practice it's going to be the same always)
generated via $XDG_RUNTIME_DIR in /run/.
To fix this properly, we'll thus go through PAM before connecting to a
user bus. Which is hard since we cannot just link against libpam in the
container, since the container might have been compiled entirely
differently. So our way out is to use systemd-run from outside, which
invokes a transient unit that does PAM from outside, doing so via D-Bus.
Inside the transient unit we then invoke systemd-stdio-bridge which
forwards D-Bus from the user bus to us. The systemd-stdio-bridge makes
up the PAM session and thus we can sure tht the bus exists at least as
long as the bus connection is kept.
Or so say this differently: if you use "systemctl -M lennart@foobar"
now, the bus connection works like this:
2. systemd-run gets a connection to the "foobar" container's
system bus, and invokes the "systemd-stdio-bridge" binary as
transient service inside a PAM session for the user "lennart"
3. The systemd-stdio-bridge then proxies our D-Bus traffic to
the user bus.
sd-bus (on host) → systemd-run (on host) → systemd-stdio-bridge (in container)
Complicated? Well, to some point yes, but otoh it's actually nice in
various other ways, primarily as it makes the -H and -M codepaths more
alike. In the -H case (i.e. connect to remote host via SSH) a very
similar three steps are used. The only difference is that instead of
"systemd-run" the "ssh" binary is used to invoke the stdio bridge in a
PAM session of some other system. Thus we get similar implementation and
isolation for similar operations.
So far when asked for augmented bus credentials and the process was
already gone we'd fail fatally. Let's make this graceful instead, and
never allow augmenting fail due to PID having vanished — unless the
augmenting is the explicit and only purpose of the requested operation.
This should be safe as clients have to explicitly query the acquired
creds anyway and handle if they couldn't be acquired. Moreover we
already handle permission problems gracefully, thus clients must be
ready to deal with missing creds.
This is useful to make selinux authorization work for short-lived client
proceses. PReviously we'd augment creds to have more info to log about
(the selinux decision would not be based on augmented data however,
because that'd be unsafe), and would fail if we couldn't get it. Now,
we'll try to acquire the data, but if we cannot acquire it, we'll still
do the selinux check, except that logging will be more limited.
hostname-util: flagsify hostname_is_valid(), drop machine_name_is_valid()
Let's clean up hostname_is_valid() a bit: let's turn the second boolean
argument into a more explanatory flags field, and add a flag that
accepts the special name ".host" as valid. This is useful for the
container logic, where the special hostname ".host" refers to the "root
container", i.e. the host system itself, and can be specified at various
places.
let's also get rid of machine_name_is_valid(). It was just an alias,
which is confusing and even more so now that we have the flags param.
logs-show: drop redundant validation of machine name
The immediately following container_get_leader() call validate the name
anyway, no need to twice exactly the same way twice immediately after
each other.
Gaurav [Fri, 4 Dec 2020 11:15:15 +0000 (16:45 +0530)]
Detect special character in dbus interface name
Added debug log to detect special character in dbus interface names.
Helps to detect a case mentioned in https://github.com/systemd/systemd/issues/14636
Dan Streetman [Wed, 9 Dec 2020 20:24:09 +0000 (15:24 -0500)]
test-network: increase wait_online timeout to handle longer dhcpv4 transient timeout
Previous commits changed the dhcpv4 retransmission algorithm to be
slightly slower, changing the amount of time it takes to notify
systemd-networkd that the dhcpv4 configuration has (transiently)
failed from around 14 second up to 28 seconds.
Since the test_dhcp_client_with_ipv4ll_without_dhcp_server test
configures an interface to use dhcpv4 without any operating dhcpv4
server running, it must increase the amount of time it waits for
the test interface to reach degraded state.
Dan Streetman [Wed, 9 Dec 2020 19:32:06 +0000 (14:32 -0500)]
sd-dhcp-client: correct retransmission timeout to match RFC
This changes the retransmission timeout algorithm for requests
other than RENEW and REBIND. Previously, the retransmission timeout
started at 2 seconds, then doubling each retransmission up to a max
of 64 seconds. This is changed to match what RFC2131 section 4.1 describes,
which skips the initial 2 second timeout and starts with a 4 second timeout
instead. Note that -1 to +1 seconds of random 'fuzz' is added to each
timeout, in previous and current behavior.
This change is therefore slightly slower than the previous behavior in
attempting retransmissions when no server response is received, since the
first transmission times out in 4 seconds instead of 2.
Since TRANSIENT_FAILURE_ATTEMPTS is set to 3, the previous length of time
before a transient failure was reported back to systemd-networkd was
2 + 4 + 8 = 14 seconds, plus, on average, 3 seconds of random 'fuzz' for
a transient failure timeout between 11 and 17 seconds. Now, since the
first timeout starts at 4, the transient failure will be reported at
4 + 8 + 16 = 28 seconds, again plus 3 random seconds for a transient
failure timeout between 25 and 31 seconds.
Additionally, if MaxAttempts= is set, it will take slightly longer to
reach than with previous behavior.
projects / thirdparty / systemd.git / log
