Franck Bui [Tue, 6 Dec 2022 19:15:43 +0000 (20:15 +0100)]
journal: give the ability to enable/disable systemd-journald-audit.socket
Before this patch the only way to prevent journald from reading the audit
messages was to mask systemd-journald-audit.socket. However this had main
drawback that downstream couldn't ship the socket disabled by default (beside
the fact that masking units is not supposed to be the usual way to disable
them).
Originally, people used "extend a PCR with a measurement" or
"measure some blob into the PCR". In our docs those uses got merged
into "extend a string into a PCR". The meaning is clear to developers, but
it's a very jargony syntax that wouldn't make any sense to somebody who encounters
it the first time. Let's return to the more natural original phrasing.
Also, change various "this is supposed to act as" to "this acts as". If it
doesn't work, we have a bug to fix. This indirection is not useful.
Also, "boot path" → "phase path" and other smaller cleanups.
man: fix issues reported by the manpage-l10n project
Fixes #25780.
> Man page: crypttab.5
> Issue 1: Missing fullstop
> Issue 2: I<cipher=>, I<hash=>, I<size=> → B<cipher=>, B<hash=>, B<size=>
>
> "Force LUKS mode\\&. When this mode is used, the following options are "
> "ignored since they are provided by the LUKS header on the device: "
> "I<cipher=>, I<hash=>, I<size=>"
Seems OK to me. The full stop is there and has been for at least a few years. And we use <option> for the markup, which is appropriate here.
> Man page: crypttab.5
> Issue 1: Missing fullstop
> Issue 2: I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-size=>, I<size=> → B<cipher=>, B<hash=>, B<keyfile-offset=>, B<keyfile-size=>, B<size=>
>
> "Use TrueCrypt encryption mode\\&. When this mode is used, the following "
> "options are ignored since they are provided by the TrueCrypt header on the "
> "device or do not apply: I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-"
> "size=>, I<size=>"
Same.
> Man page: journalctl.1
> Issue 1: make be → may be
Fixed.
> Issue 2: below\\&. → below:
Fixed.
> Man page: journalctl.1
> Issue: Colon at the end?
>
> "The following commands are understood\\&. If none is specified the default "
> "is to display journal records\\&."
> msgstr ""
> "Die folgenden Befehle werden verstanden\\&. Falls keiner festgelegt ist, ist "
> "die Anzeige von Journal-Datensätzen die Vorgabe\\&."
This is a bit awkward, but I'm not sure how to fix it.
> Man page: kernel-install.8
> Issue: methods a fallback → methods fallback
It was correct, but I added a comma to make the sense clearer.
> Man page: loader.conf.5
> Issue 1: secure boot variables → Secure Boot variables
> Issue 2: one → one for (multiple times)
>
> "Supported secure boot variables are one database for authorized images, one "
> "key exchange key (KEK) and one platform key (PK)\\&. For more information, "
> "refer to the \\m[blue]B<UEFI specification>\\m[]\\&\\s-2\\u[2]\\d\\s+2, "
> "under Secure Boot and Driver Signing\\&. Another resource that describe the "
> "interplay of the different variables is the \\m[blue]B<EDK2 "
> "documentation>\\m[]\\&\\s-2\\u[3]\\d\\s+2\\&."
"one of" would sound strange. "One this and one that" is OK.
> Man page: loader.conf.5
> Issue: systemd-boot → B<systemd-boot>(7)
Fixed.
> Man page: logind.conf.5
> Issue: systemd-logind → B<systemd-logind>(8)
We use <filename>systemd-logind</> on subsequent references… I think that's good enough.
> Man page: nss-myhostname.8
> Issue: B<getent> → B<getent>(1)
Fixed.
> Man page: nss-resolve.8
> Issue: B<systemd-resolved> → B<systemd-resolved>(8)
The first reference does this, subsequent are shorter.
> Man page: pam_systemd_home.8
> Issue: auth and account use "reason", while session and password do not?
Reworded.
> Man page: portablectl.1
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: repart.d.5
> Issue: The partition → the partition
Fixed.
> Man page: repart.d.5
> Issue: B<systemd-repart> → B<systemd-repart>(8)
The first reference does this. I also change this one, because it's pretty far down in the text.
> Man page: systemd.1
> Issue: kernel command line twice?
>
> "Takes a boolean argument\\&. If false disables importing credentials from "
> "the kernel command line, qemu_fw_cfg subsystem or the kernel command line\\&."
Apparently this was fixed already.
> Man page: systemd-boot.7
> Issue: enrollement → enrollment
Fixed.
> Man page: systemd-cryptenroll.1
> Issue: multiple cases: any specified → the specified
Reworded.
> Man page: systemd-cryptenroll.1
> Issue: If this this → If this
Fixed tree-wide.
> Man page: systemd-cryptsetup-generator.8
> Issue: and the initrd → and in the initrd
"Is honoured by the initrd" is OK, because we often speak about the initrd as a single unit. But in the same paragraph we also used "in the initrd", which makes the other use look sloppy. I changed it to "in the initrd" everywhere in that file.
> Man page: systemd.directives.7
> Issue: Why are these two quoted (but not others)?
>
> "B<\\*(Aqh\\*(Aq>"
>
> B<\\*(Aqs\\*(Aq>"
>
> "B<\\*(Aqy\\*(Aq>"
This is autogenerated from files… We use slightly different markup in different files, and it's just too hard to make it consistent. We gave up on this.
> Man page: systemd.exec.5
> Issue: B<select()> → B<select>(2)
Fixed.
> Man page: systemd.exec.5
> Issue: qemu → B<qemu>(1)
The man page doesn't seem to be in any of the canonical places on the web.
I added a link to online docs.
> Man page: systemd.exec.5
> Issue: variable → variables
Seems to be fixed already.
> Man page: systemd-integritysetup-generator.8
> Issue: systemd-integritysetup-generator → B<systemd-integritysetup-generator>
I changed <filename> to <command>.
> Man page: systemd-integritysetup-generator.8
> Issue: superfluous comma at the end
Already fixed.
> Man page: systemd-measure.1
> Issue: (see B<--pcr-bank=>) below → (see B<--pcr-bank=> below)
Reworded.
> Man page: systemd-measure.1
> Issue: =PATH> → =>I<PATH>
Fixed.
> Man page: systemd-measure.1.po
> Issue: B<--bank=DIGEST> → B<--bank=>I<DIGEST>
Fixed.
> Man page: systemd.netdev.5
> Issue: os the → on the
Appears to have been fixed already.
> Man page: systemd.netdev.5
> Issue: Onboard → On-board (as in previous string)
Updated.
> Man page: systemd.network.5
> Issue: B<systemd-networkd> -> B<systemd-networkd>(8)
First reference does this, subsequent do not.
> Man page: systemd.network.5
> Issue: B<netlabelctl> → B<netlabelctl>(8)
First reference does this, subsequent do not.
> Man page: systemd.network.5
> Issue: Missing verb (aquired? configured?) in the half sentence starting with "or by a "
I dropped the comma.
> Man page: systemd-nspawn.1
> Issue: All host users outside of that range → All other host users
Reworded.
> # FIXME no effect → no effect\\&.
> #. type: Plain text
> #: archlinux debian-unstable fedora-rawhide mageia-cauldron opensuse-tumbleweed
> msgid ""
> "Whichever ID mapping option is used, the same mapping will be used for users "
> "and groups IDs\\&. If B<rootidmap> is used, the group owning the bind "
> "mounted directory will have no effect"
A period is added. Not sure if there's some other issue.
> Man page: systemd-oomd.service.8
> Issue: B<systemd> → B<systemd>(1)
Done.
> Man page: systemd.path.5
> Issue 1: B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2: This section does not (yet?) exist
Fixed.
> Man page: systemd-pcrphase.service.8
> Issue 1: indicate phases into TPM2 PCR 11 ??
> Issue 2: Colon at the end of the paragraph?
Fixed.
> Man page: systemd-pcrphase.service.8
> Issue: final boot phase → final shutdown phase?
Updated.
> Man page: systemd-pcrphase.service.8
> Issue: for the the → for the
Fixed tree-wide.
> Man page: systemd-portabled.service.8
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: systemd-pstore.service.8
> Issue: Here and the following paragraphs: . → \\&. // Upstream: What does this comment mean? // You normally write \\&. for a full dot (full stop etc.); here you write only "." (i.e. a plain dot).
>
> "and we look up \"localhost\", nss-dns will send the following queries to "
> "systemd-resolved listening on 127.0.0.53:53: first \"localhost.foobar.com\", "
> "then \"localhost.barbar.com\", and finally \"localhost\". If (hopefully) the "
> "first two queries fail, systemd-resolved will synthesize an answer for the "
> "third query."
Looks all OK to me.
> Man page: systemd.resource-control.5
> Issue: Missing closing bracket after link to Control Groups version 1
Fixed.
> Man page: systemd-sysext.8
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: systemd.timer.5
> Issue 1: B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2: This section does not (yet?) exist
Fixed.
> Man page: systemd.unit.5
> Issue: that is → that are
Fixed.
> Man page: systemd-veritysetup-generator.8
> Issue: systemd-veritysetup-generator → B<systemd-veritysetup-generator>
>
> "systemd-veritysetup-generator implements B<systemd.generator>(7)\\&."
>
> "systemd-veritysetup-generator understands the following kernel command line "
> "parameters:"
Updated.
> Man page: systemd-volatile-root.service.8
> Issue: initrdyes → Initrd
Fixed.
> Man page: sysupdate.d.5
> Issue: : → \\&. (As above in TRANSFER)
Updated.
> Man page: sysupdate.d.5
> Issue: some → certain
Updated.
> Man page: sysupdate.d.5
> Issue 1: i\\&.e\\& → I\\&.e\\&
Fixed.
> Issue 2: the image → the system
"image" seems correct.
> Man page: tmpfiles.d.5
> Issue: systemd-tmpfiles → B<systemd-tmpfiles>(8)
Meson started warning when 'setup' is not used:
WARNING: Running the setup command as `meson [options]` instead of `meson setup [options]` is ambiguous and deprecated.
Also add more quoting in output to make the message clearer.
tree-wide: fix return value handling of base64mem()
This returns an ssize_t, not an int. On populare archs that's the
difference between 64bit and 32bit. hence, let's be more careful here,
and not silently drop half the bits on the ground by assigning the
return value to "int".
These wrap RELOADING=1 and STOPPING=1 messages. The former is
particularly useful, since we want to insert the MONOTONIC_USEC= field
into the message automatically, which is easy from C but harder from
shell.
udevd: implement the full Type=notify-reload protocol
We are basically already there, just need to add MONOTONIC_USEC= to the
RELOADING=1 message, and make sure the message is generated in really
all cases.
pid1: make sure we send our calling service manager RELOADING=1 when reloading
And send READY=1 again when we are done with it.
We do this not only for "daemon-reload" but also for "daemon-reexec" and
"switch-root", since from the perspective of an encapsulating service
manager these three operations are not that different.
We converted to not using #ifdef for most of our defines because the syntax is
nicer and we are protected against typos and can set -Werror=undef. Let's do
the same for SD_BOOT. The define is nicely hidden in build.h for normal builds,
and for EFI builds we were already setting SD_BOOT on the commandline.
Our HAVE_* variables are defined to 0 or 1, so '#if defined(HAVE_*)' is always true.
The variable is not defined when compiling for EFI though, so we need the
additional guard.
(I don't want to do something like add -DHAVE_EXPLICIT_BZERO=0 to the commandline
in src/efi/boot/meson.build, because this quite verbose. Our compilation commandlines
are very long already. Let's instead keep this localized in this one spot in the
source file.)x
Jan Janssen [Sat, 7 Jan 2023 21:16:52 +0000 (22:16 +0100)]
boot: Simplify object erasure
This erase_obj() machinery looks like voodoo and creates an awful lot of
noise as soon as we get back to building with -O0. We can do this in a
more simple way by introducing a struct that holds the information we
need on cleanup. When building with optimization enabled, all this gets
inlined and the eraser vanishes.
msizanoen1 [Sat, 8 Oct 2022 07:37:02 +0000 (14:37 +0700)]
journal: enforce strict consistency for realtime timestamps on write
Ensure all realtime timestamps in a journal file are strictly
ordered on write as a defense-in-depth measure. All known callers of
journal_file_append_entry and journal_file_copy_entry, which call this
function, should be able to handle the error by rotating the journal.
This is especially helpful for systems with RTC local time enabled,
where all log entries from initramfs might be recorded as several hours
later than it actually is, which won't get caught by journald during log
flushing. In those cases, the resulting inconsistency can cause libsystemd
to loop infinitely through journal files as observed in
`abrt-dump-journal-oops`.
import: use CURLOPT_PROTOCOLS_STR with libcurl >= 7.85.0
CURLOPT_PROTOCOLS [0] was deprecated in libcurl 7.85.0 with
CURLOPT_PROTOCOLS_STR [1] as a replacement, causing build warnings/errors:
../build/src/import/curl-util.c: In function ‘curl_glue_make’:
../build/src/import/curl-util.c:255:9: error: ‘CURLOPT_PROTOCOLS’ is deprecated: since 7.85.0. Use CURLOPT_PROTOCOLS_STR [-Werror=deprecated-declarations]
255 | if (curl_easy_setopt(c, CURLOPT_PROTOCOLS, CURLPROTO_HTTP|CURLPROTO_HTTPS|CURLPROTO_FILE) != CURLE_OK)
| ^~
In file included from ../build/src/import/curl-util.h:4,
from ../build/src/import/curl-util.c:6:
/usr/include/curl/curl.h:1749:3: note: declared here
1749 | CURLOPTDEPRECATED(CURLOPT_PROTOCOLS, CURLOPTTYPE_LONG, 181,
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Since there's no grace period between the two symbols, let's resort
to a light if-def-ery to resolve this.
import: use CURLINFO_SCHEME instead of CURLINFO_PROTOCOL
CURLINFO_PROTOCOL has been deprecated in curl 7.85.0 causing compilation
warnings/errors:
../build/src/import/pull-job.c: In function ‘pull_job_curl_on_finished’:
../build/src/import/pull-job.c:142:9: error: ‘CURLINFO_PROTOCOL’ is deprecated: since 7.85.0. Use CURLINFO_SCHEME [-Werror=deprecated-declarations]
142 | code = curl_easy_getinfo(curl, CURLINFO_PROTOCOL, &protocol);
| ^~~~
In file included from ../build/src/import/curl-util.h:4,
from ../build/src/import/pull-job.h:6,
from ../build/src/import/pull-common.h:7,
from ../build/src/import/pull-job.c:16:
/usr/include/curl/curl.h:2896:3: note: declared here
2896 | CURLINFO_PROTOCOL CURL_DEPRECATED(7.85.0, "Use CURLINFO_SCHEME")
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Since both CURLINFO_SCHEME and CURLINFO_PROTOCOL were introduced in
the same curl version (7.52.0 [0][1]) we don't have to worry about
backwards compatibility.
Yu Watanabe [Mon, 9 Jan 2023 05:00:09 +0000 (14:00 +0900)]
sd-device: make device_set_syspath() clear sysname and sysnum
Otherwise, when a new syspath is assigned to the sd-device object,
sd_device_get_sysname() or _sysnum() will provide an outdated device
name or number.
oss-fuzz: include generated corpora in the final zip file
Since the files with generated directives are now automatically
generated during build, they're now under the respective build directory
which the current oss-fuzz CI script didn't account for.
load-fragment: config_parse_emergency_action() doesn't ever get a Manager pointer passed in
In 'data' we get the location passed in we write stuff, and that's not
the Manager object.
And we neither get the Manager passed in via 'userdata', because at the
time we parse the emergency action for the manager the Manager is not
actually allocated yet.
hence, let's fix this differently, and pass in the user/system mode
descriptor via the 'ltype' argument.
Sam James [Fri, 6 Jan 2023 10:58:32 +0000 (10:58 +0000)]
tmpfiles: avoid null free() for acl attributes
When built with ACL support, we might be processing a tmpfiles
entry where there's no cause for us to call parse_acls_from_arg,
then we get to the end of parse_line without having ever populated
i.{acl_access, acl_default}.
Then we pass a null pointer into acl_free().
From UBSAN w/ GCC 13.0.0_pre20230101:
```
$ systemd-tmpfiles --clean
/var/tmp/portage/sys-apps/acl-2.3.1-r1/work/acl-2.3.1/libacl/acl_free.c:44:14: runtime error: applying non-zero offset 18446744073709551608 to null pointer
#0 0x7f65d868b482 in acl_free /var/tmp/portage/sys-apps/acl-2.3.1-r1/work/acl-2.3.1/libacl/acl_free.c:44
#1 0x55fe7e592249 in item_free_contents ../systemd-9999/src/tmpfiles/tmpfiles.c:2855
#2 0x55fe7e5a347a in parse_line ../systemd-9999/src/tmpfiles/tmpfiles.c:3158
#3 0x55fe7e5a347a in read_config_file ../systemd-9999/src/tmpfiles/tmpfiles.c:3897
#4 0x55fe7e590c61 in read_config_files ../systemd-9999/src/tmpfiles/tmpfiles.c:3985
#5 0x55fe7e590c61 in run ../systemd-9999/src/tmpfiles/tmpfiles.c:4157
#6 0x55fe7e590c61 in main ../systemd-9999/src/tmpfiles/tmpfiles.c:4218
#7 0x7f65d7ebe289 (/usr/lib64/libc.so.6+0x23289)
#8 0x7f65d7ebe344 in __libc_start_main (/usr/lib64/libc.so.6+0x23344)
#9 0x55fe7e591900 in _start (/usr/bin/systemd-tmpfiles+0x11900)
```
sd-event: don't mistake USEC_INFINITY passed in for overflow
Let's pass USEC_INFINITY from sd_event_source_set_time_relative() to
sd_event_source_set_time() instead of raising EOVERFLOW.
We should raise EOVERFLOW only if your addition fails, but not if the
input already is USEC_INFINITY, since it's an entirely valid operation
to have an infinite time-out, and we should support that.
projects / thirdparty / systemd.git / log
