basic/fd-util: refuse "infinite" loop in close_all_fds()
I had a test machine with ulimit -n set to 1073741816 through pam
("session required pam_limits.so set_all", which copies the limits from PID 1,
left over from testing of #10921).
test-execute would "hang" and then fail with a timeout when running
exec-inaccessiblepaths-proc.service. It turns out that the problem was in
close_all_fds(), which would go to the fallback path of doing close() 1073741813 times. Let's just fail if we hit this case. This only matters
for cases where both /proc is inaccessible, and the *soft* limit has been
raised.
(gdb) bt
#0 0x00007f7e2e73fdc8 in close () from target:/lib64/libc.so.6
#1 0x00007f7e2e42cdfd in close_nointr ()
from target:/home/zbyszek/src/systemd-work3/build-rawhide/src/shared/libsystemd-shared-241.so
#2 0x00007f7e2e42d525 in close_all_fds ()
from target:/home/zbyszek/src/systemd-work3/build-rawhide/src/shared/libsystemd-shared-241.so
#3 0x0000000000426e53 in exec_child ()
#4 0x0000000000429578 in exec_spawn ()
#5 0x00000000004ce1ab in service_spawn ()
#6 0x00000000004cff77 in service_enter_start ()
#7 0x00000000004d028f in service_enter_start_pre ()
#8 0x00000000004d16f2 in service_start ()
#9 0x00000000004568f4 in unit_start ()
#10 0x0000000000416987 in test ()
#11 0x0000000000417632 in test_exec_inaccessiblepaths ()
#12 0x0000000000419362 in run_tests ()
#13 0x0000000000419632 in main ()
test-execute: allow filtering test cases by pattern
When debugging failure in one of the cases, it's annoying to have to wade
through the output from all the other cases. Let's allow picking select
cases.
seccomp: allow shmat to be a separate syscall on architectures which use a multiplexer
After
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0d6040d46817,
those syscalls have their separate numbers and we can block them.
But glibc might still use the old ones. So let's just do a best-effort
block and not assume anything about how effective it is.
../src/shared/bootspec.c: In function ‘find_sections’:
../src/shared/bootspec.c:425:23: warning: comparison of integer expressions of different signedness: ‘ssize_t’ {aka ‘int’} and ‘uint32_t’ {aka ‘unsigned int’} [-Wsign-compare]
425 | if (n != size)
| ^~
man: reorder and add examples to systemd-analyze(1)
The number of verbs supported by systemd-analyze has grown quite a bit, and the
man page has become an unreadable wall of text. Let's put each verb in a
separate subsection, grouping similar verbs together, and add a lot of examples
to guide the user.
Frantisek Sumsal [Fri, 15 Mar 2019 09:05:33 +0000 (10:05 +0100)]
test: use PBKDF2 instead of Argon2 in cryptsetup...
to reduce memory requirements for volume manipulation. Also,
to further improve the test performance, reduce number of PBKDF
iterations to 1000 (allowed minimum).
tests: install /usr/bin/dbus-broker when using dbus-broker
We'd install the service file, and then dbus-broker-launcher because it is
mentioned in ExecStart=, but not the main executable, so nothing would work.
Let's just install dbus-broker executables if found. They are small, so this
doesn't matter much, and is much easier than figuring the exact conditions
under which dbus-broker will be used instead of dbus-daemon.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
David Rheinsberg [Thu, 14 Mar 2019 12:34:13 +0000 (13:34 +0100)]
sd-bus: skip sending formatted UIDs via SASL
The dbus external authentication takes as optional argument the UID the
sender wants to authenticate as. This uid is purely optional. The
AF_UNIX socket already conveys the same information through the
auxiliary socket data, so we really don't have to provide that
information.
Unfortunately, there is no way to send empty arguments, since they are
interpreted as "missing argument", which has a different meaning. The
SASL negotiation thus changes from:
AUTH EXTERNAL <uid>
NEGOTIATE_UNIX_FD (optional)
BEGIN
to:
AUTH EXTERNAL
DATA
NEGOTIATE_UNIX_FD (optional)
BEGIN
And thus the replies we expect as a client change from:
OK <server-id>
AGREE_UNIX_FD (optional)
to:
DATA
OK <server-id>
AGREE_UNIX_FD (optional)
Since the old sd-bus server implementation used the wrong reply for
"AUTH" requests that do not carry the arguments inlined, we decided to
make sd-bus clients accept this as well. Hence, sd-bus now allows
"OK <server-id>\r\n" replies instead of "DATA\r\n" replies.
Signed-off-by: David Rheinsberg <david.rheinsberg@gmail.com>
David Rheinsberg [Thu, 14 Mar 2019 12:33:28 +0000 (13:33 +0100)]
sd-bus: fix SASL reply to empty AUTH
The correct way to reply to "AUTH <protocol>" without any payload is to
send "DATA" rather than "OK". The "DATA" reply triggers the client to
respond with the requested payload.
In fact, adding the data as hex-encoded argument like
"AUTH <protocol> <hex-data>" is an optimization that skips the "DATA"
roundtrip. The standard way to perform an authentication is to send the
"DATA" line.
This commit fixes sd-bus to properly send the "DATA" line. Surprisingly
no existing implementation depends on this, as they all pass the data
directly as argument to "AUTH". This will not work if we want to pass
an empty argument, though.
Signed-off-by: David Rheinsberg <david.rheinsberg@gmail.com>
Jonathan Lebon [Tue, 12 Mar 2019 19:23:25 +0000 (15:23 -0400)]
units: update catalog after systemd-tmpfiles runs
`systemd-journal-catalog-update.service` writes to `/var`. However, it's
not explicitly ordered wrt `systemd-tmpfiles-setup.service`, which means
that it may run before or after.
This is an issue for Fedora CoreOS, which uses Ignition. We want to be
able to prepare `/var` on first boot from the initrd, where the SELinux
policy is not loaded yet. This means that the hierarchy under `/var` is
not correctly labeled. We add a `Z /var - - -` tmpfiles entry so that it
gets relabeled once `/var` gets mounted post-switchroot.
So any service that tries to access `/var` before `systemd-tmpfiles`
relabels it is likely to hit `EACCES`.
Fix this by simply ordering `systemd-journal-catalog-update.service`
after `systemd-tmpfiles-setup.service`. This is also clearer since the
tmpfiles entries are the canonical source of how `/var` should be
populated.
For more context on this, see:
https://github.com/coreos/ignition/issues/635#issuecomment-446620297
Benjamin Berg [Fri, 8 Mar 2019 16:42:23 +0000 (17:42 +0100)]
hwdb: Fix airplane mode triggering when resuming HP Spectre x360 13
On these devices the key randomly fires during/after suspend/resume
triggering spurious airplane mode changes. The scancode simply needs to
be ignored.
Yu Watanabe [Tue, 12 Mar 2019 02:35:23 +0000 (11:35 +0900)]
network: automatically pick an address on link when L2TP.Local= is not specified
This makes L2TP.Local= support an empty string, 'auto', 'static', and
'dynamic'. When one of the values are specified, a local address is
automatically picked from the local interface of the tunnel.
Frantisek Sumsal [Wed, 13 Mar 2019 09:07:44 +0000 (10:07 +0100)]
test: avoid double-fsck'ing of the rootfs on Arch
Since systemd 206 the combination of systemd and mkinitcpio
causes, under certain conditions, the rootfs to be double fsck'd.
Symptoms:
```
:: performing fsck on '/dev/sda1'
systemd: clean, 3523/125488 files, 141738/501760 blocks
********************** WARNING **********************
* *
* The root device is not configured to be mounted *
* read-write! It may be fsck'd again later. *
* *
*****************************************************
<snip>
[ OK ] Started File System Check on Root Device
```
This occurs when neither 'ro' or 'rw', or only 'ro' is present
on the kernel command line. The solution is to mount the roofs
as read-write on the kernel command line, so systemd knows to not fsck
it again.
projects / thirdparty / systemd.git / log
