[thirdparty/u-boot.git] / src / arm64 / qcom / qrb4210-rb2.dts

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2023, Linaro Limited
 */

/dts-v1/;

#include <dt-bindings/leds/common.h>
#include "sm4250.dtsi"
#include "pm6125.dtsi"

/ {
	model = "Qualcomm Technologies, Inc. QRB4210 RB2";
	compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250";

	aliases {
		serial0 = &uart4;
		serial1 = &uart3;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	clocks {
		clk40M: can-clk {
			compatible = "fixed-clock";
			clock-frequency = <40000000>;
			#clock-cells = <0>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";
		label = "gpio-keys";

		pinctrl-0 = <&kypd_vol_up_n>;
		pinctrl-names = "default";

		key-volume-up {
			label = "Volume Up";
			linux,code = <KEY_VOLUMEUP>;
			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
			debounce-interval = <15>;
			linux,can-disable;
			wakeup-source;
		};
	};

	hdmi-connector {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con: endpoint {
				remote-endpoint = <&lt9611_out>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		led-bt {
			label = "blue:bt";
			function = LED_FUNCTION_BLUETOOTH;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "bluetooth-power";
			default-state = "off";
		};

		led-user0 {
			label = "green:user0";
			function = LED_FUNCTION_INDICATOR;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "none";
			default-state = "off";
			panic-indicator;
		};

		led-wlan {
			label = "yellow:wlan";
			function = LED_FUNCTION_WLAN;
			color = <LED_COLOR_ID_YELLOW>;
			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "phy0tx";
			default-state = "off";
		};
	};

	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
		compatible = "regulator-fixed";
		regulator-name = "VREG_HDMI_OUT_1P2";
		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <1200000>;
		vin-supply = <&vdc_1v2>;
		regulator-always-on;
		regulator-boot-on;
	};

	lt9611_3v3: regulator-lt9611-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "LT9611_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vdc_3v3>;
		regulator-always-on;
		regulator-boot-on;
	};

	/* Main barrel jack input */
	vdc_12v: regulator-vdc-12v {
		compatible = "regulator-fixed";
		regulator-name = "DC_12V";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	/* 1.2V supply stepped down from the barrel jack input */
	vdc_1v2: regulator-vdc-1v2 {
		compatible = "regulator-fixed";
		regulator-name = "VDC_1V2";
		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <1200000>;
		vin-supply = <&vdc_12v>;
		regulator-always-on;
		regulator-boot-on;
	};

	/* 3.3V supply stepped down from the barrel jack input */
	vdc_3v3: regulator-vdc-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "VDC_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vdc_12v>;
		regulator-always-on;
		regulator-boot-on;
	};

	/* 5V supply stepped down from the barrel jack input */
	vdc_5v: regulator-vdc-5v {
		compatible = "regulator-fixed";
		regulator-name = "VDC_5V";

		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	/* "Battery" voltage for the SoM, stepped down from the barrel jack input */
	vdc_vbat_som: regulator-vdc-vbat {
		compatible = "regulator-fixed";
		regulator-name = "VBAT_SOM";
		regulator-min-microvolt = <4200000>;
		regulator-max-microvolt = <4200000>;
		regulator-always-on;
		regulator-boot-on;
	};

	/* PMI632 charger out, supplied by VBAT */
	vph_pwr: regulator-vph-pwr {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;
		vin-supply = <&vdc_vbat_som>;

		regulator-always-on;
		regulator-boot-on;
	};
};

&gpi_dma0 {
	status = "okay";
};

&gpu {
	status = "okay";

	zap-shader {
		firmware-name = "qcom/qrb4210/a610_zap.mbn";
	};
};

&i2c2 {
	clock-frequency = <400000>;
	status = "okay";

	lt9611_codec: hdmi-bridge@2b {
		compatible = "lontium,lt9611uxc";
		reg = <0x2b>;
		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;

		vdd-supply = <&vreg_hdmi_out_1p2>;
		vcc-supply = <&lt9611_3v3>;

		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
		pinctrl-names = "default";
		#sound-dai-cells = <1>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				lt9611_a: endpoint {
					remote-endpoint = <&mdss_dsi0_out>;
				};
			};

			port@2 {
				reg = <2>;

				lt9611_out: endpoint {
					remote-endpoint = <&hdmi_con>;
				};
			};
		};
	};
};

&mdss {
	status = "okay";
};

&mdss_dsi0 {
	vdda-supply = <&vreg_l18a_1p232>;
	status = "okay";
};

&mdss_dsi0_out {
	remote-endpoint = <&lt9611_a>;
	data-lanes = <0 1 2 3>;
};

&mdss_dsi0_phy {
	status = "okay";
};

&pm6125_gpios {
	kypd_vol_up_n: kypd-vol-up-n-state {
		pins = "gpio5";
		function = "normal";
		power-source = <0>;
		bias-pull-up;
		input-enable;
	};
};

&pon_pwrkey {
	status = "okay";
};

&pon_resin {
	linux,code = <KEY_VOLUMEDOWN>;
	status = "okay";
};

&qupv3_id_0 {
	status = "okay";
};

&remoteproc_adsp {
	firmware-name = "qcom/qrb4210/adsp.mbn";

	status = "okay";
};

&remoteproc_cdsp {
	firmware-name = "qcom/qrb4210/cdsp.mbn";

	status = "okay";
};

&remoteproc_mpss {
	firmware-name = "qcom/qrb4210/modem.mbn";

	status = "okay";
};

&rpm_requests {
	regulators {
		compatible = "qcom,rpm-pm6125-regulators";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s8-supply = <&vph_pwr>;
		vdd-s9-supply = <&vph_pwr>;
		vdd-s10-supply = <&vph_pwr>;

		vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>;
		vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>;
		vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>;
		vdd-l6-l8-supply = <&vreg_s5a_0p848>;
		vdd-l9-l11-supply = <&vreg_s7a_2p04>;
		vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>;
		vdd-l12-l16-supply = <&vreg_s7a_2p04>;
		vdd-l23-l24-supply = <&vph_pwr>;

		vreg_s5a_0p848: s5 {
			regulator-min-microvolt = <920000>;
			regulator-max-microvolt = <1128000>;
		};

		vreg_s6a_1p352: s6 {
			regulator-min-microvolt = <304000>;
			regulator-max-microvolt = <1456000>;
		};

		vreg_s7a_2p04: s7 {
			regulator-min-microvolt = <1280000>;
			regulator-max-microvolt = <2080000>;
		};

		vreg_l1a_1p0: l1 {
			regulator-min-microvolt = <952000>;
			regulator-max-microvolt = <1152000>;
		};

		vreg_l4a_0p9: l4 {
			regulator-min-microvolt = <488000>;
			regulator-max-microvolt = <1000000>;
		};

		vreg_l5a_2p96: l5 {
			regulator-min-microvolt = <1648000>;
			regulator-max-microvolt = <3056000>;
			regulator-allow-set-load;
		};

		vreg_l6a_0p6: l6 {
			regulator-min-microvolt = <576000>;
			regulator-max-microvolt = <656000>;
		};

		vreg_l7a_1p256: l7 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1304000>;
		};

		vreg_l8a_0p664: l8 {
			regulator-min-microvolt = <640000>;
			regulator-max-microvolt = <640000>;
		};

		vreg_l9a_1p8: l9 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-allow-set-load;
		};

		vreg_l10a_1p8: l10 {
			regulator-min-microvolt = <1704000>;
			regulator-max-microvolt = <1904000>;
		};

		vreg_l11a_1p8: l11 {
			regulator-min-microvolt = <1704000>;
			regulator-max-microvolt = <1952000>;
			regulator-allow-set-load;
		};

		vreg_l12a_1p8: l12 {
			regulator-min-microvolt = <1624000>;
			regulator-max-microvolt = <1984000>;
		};

		vreg_l13a_1p8: l13 {
			regulator-min-microvolt = <1504000>;
			regulator-max-microvolt = <1952000>;
		};

		vreg_l14a_1p8: l14 {
			regulator-min-microvolt = <1704000>;
			regulator-max-microvolt = <1904000>;
		};

		vreg_l15a_3p128: l15 {
			regulator-min-microvolt = <2920000>;
			regulator-max-microvolt = <3232000>;
		};

		vreg_l16a_1p3: l16 {
			regulator-min-microvolt = <1704000>;
			regulator-max-microvolt = <1904000>;
			regulator-allow-set-load;
		};

		vreg_l17a_1p3: l17 {
			regulator-min-microvolt = <1152000>;
			regulator-max-microvolt = <1384000>;
			regulator-allow-set-load;
		};

		vreg_l18a_1p232: l18 {
			regulator-min-microvolt = <1104000>;
			regulator-max-microvolt = <1312000>;
		};

		vreg_l19a_1p8: l19 {
			regulator-min-microvolt = <1624000>;
			regulator-max-microvolt = <3304000>;
		};

		vreg_l20a_1p8: l20 {
			regulator-min-microvolt = <1624000>;
			regulator-max-microvolt = <3304000>;
		};

		vreg_l21a_2p704: l21 {
			regulator-min-microvolt = <2400000>;
			regulator-max-microvolt = <3600000>;
		};

		vreg_l22a_2p96: l22 {
			regulator-min-microvolt = <2952000>;
			regulator-max-microvolt = <3304000>;
			regulator-system-load = <100000>;
			regulator-allow-set-load;
		};

		vreg_l23a_3p3: l23 {
			regulator-min-microvolt = <3312000>;
			regulator-max-microvolt = <3312000>;
			regulator-allow-set-load;
		};

		vreg_l24a_2p96: l24 {
			regulator-min-microvolt = <2704000>;
			regulator-max-microvolt = <3600000>;
			regulator-system-load = <100000>;
			regulator-allow-set-load;
		};
	};
};

&sdhc_1 {
	pinctrl-0 = <&sdc1_state_on>;
	pinctrl-1 = <&sdc1_state_off>;
	pinctrl-names = "default", "sleep";

	vmmc-supply = <&vreg_l24a_2p96>;
	vqmmc-supply = <&vreg_l11a_1p8>;
	no-sdio;
	non-removable;

	status = "okay";
};

&sdhc_2 {
	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */

	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
	pinctrl-names = "default", "sleep";

	vmmc-supply = <&vreg_l22a_2p96>;
	vqmmc-supply = <&vreg_l5a_2p96>;
	no-sdio;

	status = "okay";
};

&spi5 {
	status = "okay";

	can@0 {
		compatible = "microchip,mcp2518fd";
		reg = <0>;
		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
		clocks = <&clk40M>;
		spi-max-frequency = <10000000>;
		vdd-supply = <&vdc_5v>;
		xceiver-supply = <&vdc_5v>;
	};
};

&sleep_clk {
	clock-frequency = <32000>;
};

&tlmm {
	gpio-reserved-ranges = <43 2>, <49 1>, <54 1>,
			       <56 3>, <61 2>, <64 1>,
			       <68 1>, <72 8>, <96 1>;

	uart3_default: uart3-default-state {
		cts-pins {
			pins = "gpio8";
			function = "qup3";
			drive-strength = <2>;
			bias-bus-hold;
		};

		rts-pins {
			pins = "gpio9";
			function = "qup3";
			drive-strength = <2>;
			bias-disable;
		};

		tx-pins {
			pins = "gpio10";
			function = "qup3";
			drive-strength = <2>;
			bias-disable;
		};

		rx-pins {
			pins = "gpio11";
			function = "qup3";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	uart3_sleep: uart3-sleep-state {
		cts-pins {
			pins = "gpio8";
			function = "gpio";
			drive-strength = <2>;
			bias-bus-hold;
		};

		rts-pins {
			pins = "gpio9";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-down;
		};

		tx-pins {
			pins = "gpio10";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};

		rx-pins {
			pins = "gpio11";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	lt9611_rst_pin: lt9611-rst-state {
		pins = "gpio41";
		function = "gpio";
		input-disable;
		output-high;
	};

	lt9611_irq_pin: lt9611-irq-state {
		pins = "gpio46";
		function = "gpio";
		bias-disable;
	};

	sdc2_card_det_n: sd-card-det-n-state {
		pins = "gpio88";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};
};

&uart3 {
	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
	pinctrl-0 = <&uart3_default>;
	pinctrl-1 = <&uart3_sleep>;
	pinctrl-names = "default", "sleep";
	status = "okay";

	bluetooth {
		compatible = "qcom,wcn3988-bt";

		vddio-supply = <&vreg_l9a_1p8>;
		vddxo-supply = <&vreg_l16a_1p3>;
		vddrf-supply = <&vreg_l17a_1p3>;
		vddch0-supply = <&vreg_l23a_3p3>;
		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
		max-speed = <3200000>;
	};
};

&uart4 {
	status = "okay";
};

&usb {
	status = "okay";
};

&usb_dwc3 {
	maximum-speed = "super-speed";
};

&usb_hsphy {
	vdd-supply = <&vreg_l4a_0p9>;
	vdda-pll-supply = <&vreg_l12a_1p8>;
	vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;

	status = "okay";
};

&usb_qmpphy {
	vdda-phy-supply = <&vreg_l4a_0p9>;
	vdda-pll-supply = <&vreg_l12a_1p8>;

	status = "okay";
};

&wifi {
	vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
	qcom,ath10k-calibration-variant = "Thundercomm_RB2";

	status = "okay";
};

&xo_board {
	clock-frequency = <19200000>;
};
Commit	Line	Data
53633a89 TR	1	// SPDX-License-Identifier: BSD-3-Clause
	2	/*
	3	* Copyright (c) 2023, Linaro Limited
	4	*/
	5
	6	/dts-v1/;
	7
	8	#include <dt-bindings/leds/common.h>
	9	#include "sm4250.dtsi"
	10	#include "pm6125.dtsi"
	11
	12	/ {
	13	model = "Qualcomm Technologies, Inc. QRB4210 RB2";
	14	compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250";
	15
	16	aliases {
	17	serial0 = &uart4;
93743d24	18	serial1 = &uart3;
53633a89 TR	19	};
	20
	21	chosen {
	22	stdout-path = "serial0:115200n8";
	23	};
	24
	25	clocks {
	26	clk40M: can-clk {
	27	compatible = "fixed-clock";
	28	clock-frequency = <40000000>;
	29	#clock-cells = <0>;
	30	};
	31	};
	32
	33	gpio-keys {
	34	compatible = "gpio-keys";
	35	label = "gpio-keys";
	36
	37	pinctrl-0 = <&kypd_vol_up_n>;
	38	pinctrl-names = "default";
	39
	40	key-volume-up {
	41	label = "Volume Up";
	42	linux,code = <KEY_VOLUMEUP>;
	43	gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
	44	debounce-interval = <15>;
	45	linux,can-disable;
	46	wakeup-source;
	47	};
	48	};
	49
	50	hdmi-connector {
	51	compatible = "hdmi-connector";
	52	type = "a";
	53
	54	port {
	55	hdmi_con: endpoint {
	56	remote-endpoint = <&lt9611_out>;
	57	};
	58	};
	59	};
	60
	61	leds {
	62	compatible = "gpio-leds";
	63
	64	led-bt {
	65	label = "blue:bt";
	66	function = LED_FUNCTION_BLUETOOTH;
	67	color = <LED_COLOR_ID_BLUE>;
	68	gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
	69	linux,default-trigger = "bluetooth-power";
	70	default-state = "off";
	71	};
	72
	73	led-user0 {
	74	label = "green:user0";
	75	function = LED_FUNCTION_INDICATOR;
	76	color = <LED_COLOR_ID_GREEN>;
	77	gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
	78	linux,default-trigger = "none";
	79	default-state = "off";
	80	panic-indicator;
	81	};
	82
83	led-wlan {
84	label = "yellow:wlan";
85	function = LED_FUNCTION_WLAN;
86	color = <LED_COLOR_ID_YELLOW>;
87	gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
88	linux,default-trigger = "phy0tx";
89	default-state = "off";
90	};
91	};
92
93	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
94	compatible = "regulator-fixed";
95	regulator-name = "VREG_HDMI_OUT_1P2";
96	regulator-min-microvolt = <1200000>;
97	regulator-max-microvolt = <1200000>;
98	vin-supply = <&vdc_1v2>;
99	regulator-always-on;
100	regulator-boot-on;
101	};
102
103	lt9611_3v3: regulator-lt9611-3v3 {
104	compatible = "regulator-fixed";
105	regulator-name = "LT9611_3V3";
106	regulator-min-microvolt = <3300000>;
107	regulator-max-microvolt = <3300000>;
108	vin-supply = <&vdc_3v3>;
109	regulator-always-on;
110	regulator-boot-on;
111	};
112
113	/* Main barrel jack input */
114	vdc_12v: regulator-vdc-12v {
115	compatible = "regulator-fixed";
116	regulator-name = "DC_12V";
117	regulator-min-microvolt = <12000000>;
118	regulator-max-microvolt = <12000000>;
119	regulator-always-on;
120	regulator-boot-on;
121	};
122
123	/* 1.2V supply stepped down from the barrel jack input */
124	vdc_1v2: regulator-vdc-1v2 {
125	compatible = "regulator-fixed";
126	regulator-name = "VDC_1V2";
127	regulator-min-microvolt = <1200000>;
128	regulator-max-microvolt = <1200000>;
129	vin-supply = <&vdc_12v>;
130	regulator-always-on;
131	regulator-boot-on;
132	};
133
134	/* 3.3V supply stepped down from the barrel jack input */
135	vdc_3v3: regulator-vdc-3v3 {
136	compatible = "regulator-fixed";
137	regulator-name = "VDC_3V3";
138	regulator-min-microvolt = <3300000>;
139	regulator-max-microvolt = <3300000>;
140	vin-supply = <&vdc_12v>;
141	regulator-always-on;
142	regulator-boot-on;
143	};
144
145	/* 5V supply stepped down from the barrel jack input */
146	vdc_5v: regulator-vdc-5v {
147	compatible = "regulator-fixed";
148	regulator-name = "VDC_5V";
149
150	regulator-min-microvolt = <5000000>;
151	regulator-max-microvolt = <5000000>;
152	regulator-always-on;
153	regulator-boot-on;
154	};
155
156	/* "Battery" voltage for the SoM, stepped down from the barrel jack input */
157	vdc_vbat_som: regulator-vdc-vbat {
158	compatible = "regulator-fixed";
159	regulator-name = "VBAT_SOM";
160	regulator-min-microvolt = <4200000>;
161	regulator-max-microvolt = <4200000>;
162	regulator-always-on;
163	regulator-boot-on;
164	};
165
166	/* PMI632 charger out, supplied by VBAT */
167	vph_pwr: regulator-vph-pwr {
168	compatible = "regulator-fixed";
169	regulator-name = "vph_pwr";
170	regulator-min-microvolt = <3700000>;
171	regulator-max-microvolt = <3700000>;
172	vin-supply = <&vdc_vbat_som>;
173
174	regulator-always-on;
175	regulator-boot-on;
176	};
177	};
178
179	&gpi_dma0 {
180	status = "okay";
181	};
182
183	&gpu {
184	status = "okay";
185
186	zap-shader {
187	firmware-name = "qcom/qrb4210/a610_zap.mbn";
188	};
189	};
190
191	&i2c2 {
192	clock-frequency = <400000>;
193	status = "okay";
194
195	lt9611_codec: hdmi-bridge@2b {
196	compatible = "lontium,lt9611uxc";
197	reg = <0x2b>;
198	interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
199	reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
200
201	vdd-supply = <&vreg_hdmi_out_1p2>;
202	vcc-supply = <&lt9611_3v3>;
203
204	pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
205	pinctrl-names = "default";
206	#sound-dai-cells = <1>;
207
208	ports {
209	#address-cells = <1>;
210	#size-cells = <0>;
211
212	port@0 {
213	reg = <0>;
214
215	lt9611_a: endpoint {
216	remote-endpoint = <&mdss_dsi0_out>;
217	};
218	};
219
220	port@2 {
221	reg = <2>;
222
223	lt9611_out: endpoint {
224	remote-endpoint = <&hdmi_con>;
225	};
226	};
227	};
228	};
229	};
230
231	&mdss {
232	status = "okay";
233	};
234
235	&mdss_dsi0 {
236	vdda-supply = <&vreg_l18a_1p232>;
237	status = "okay";
238	};
239
240	&mdss_dsi0_out {
241	remote-endpoint = <&lt9611_a>;
242	data-lanes = <0 1 2 3>;
243	};
244
245	&mdss_dsi0_phy {
246	status = "okay";
247	};
248
249	&pm6125_gpios {
250	kypd_vol_up_n: kypd-vol-up-n-state {
251	pins = "gpio5";
252	function = "normal";
253	power-source = <0>;
254	bias-pull-up;
255	input-enable;
256	};
257	};
258
259	&pon_pwrkey {
260	status = "okay";
261	};
262
263	&pon_resin {
264	linux,code = <KEY_VOLUMEDOWN>;
265	status = "okay";
266	};
267
268	&qupv3_id_0 {
269	status = "okay";
270	};
271
272	&remoteproc_adsp {
273	firmware-name = "qcom/qrb4210/adsp.mbn";
274
275	status = "okay";
276	};
277
278	&remoteproc_cdsp {
279	firmware-name = "qcom/qrb4210/cdsp.mbn";
280
281	status = "okay";
282	};
283
93743d24 TR	284	&remoteproc_mpss {
	285	firmware-name = "qcom/qrb4210/modem.mbn";
	286
	287	status = "okay";
	288	};
	289
53633a89 TR	290	&rpm_requests {
	291	regulators {
	292	compatible = "qcom,rpm-pm6125-regulators";
	293
	294	vdd-s1-supply = <&vph_pwr>;
	295	vdd-s2-supply = <&vph_pwr>;
	296	vdd-s3-supply = <&vph_pwr>;
	297	vdd-s4-supply = <&vph_pwr>;
	298	vdd-s5-supply = <&vph_pwr>;
	299	vdd-s6-supply = <&vph_pwr>;
	300	vdd-s7-supply = <&vph_pwr>;
	301	vdd-s8-supply = <&vph_pwr>;
	302	vdd-s9-supply = <&vph_pwr>;
	303	vdd-s10-supply = <&vph_pwr>;
	304
	305	vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>;
	306	vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>;
	307	vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>;
	308	vdd-l6-l8-supply = <&vreg_s5a_0p848>;
	309	vdd-l9-l11-supply = <&vreg_s7a_2p04>;
	310	vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>;
	311	vdd-l12-l16-supply = <&vreg_s7a_2p04>;
	312	vdd-l23-l24-supply = <&vph_pwr>;
	313
	314	vreg_s5a_0p848: s5 {
	315	regulator-min-microvolt = <920000>;
	316	regulator-max-microvolt = <1128000>;
	317	};
	318
	319	vreg_s6a_1p352: s6 {
	320	regulator-min-microvolt = <304000>;
	321	regulator-max-microvolt = <1456000>;
	322	};
	323
	324	vreg_s7a_2p04: s7 {
	325	regulator-min-microvolt = <1280000>;
	326	regulator-max-microvolt = <2080000>;
	327	};
	328
	329	vreg_l1a_1p0: l1 {
	330	regulator-min-microvolt = <952000>;
	331	regulator-max-microvolt = <1152000>;
	332	};
	333
	334	vreg_l4a_0p9: l4 {
	335	regulator-min-microvolt = <488000>;
	336	regulator-max-microvolt = <1000000>;
	337	};
	338
	339	vreg_l5a_2p96: l5 {
	340	regulator-min-microvolt = <1648000>;
	341	regulator-max-microvolt = <3056000>;
	342	regulator-allow-set-load;
	343	};
	344
	345	vreg_l6a_0p6: l6 {
	346	regulator-min-microvolt = <576000>;
	347	regulator-max-microvolt = <656000>;
	348	};
	349
	350	vreg_l7a_1p256: l7 {
	351	regulator-min-microvolt = <1200000>;
	352	regulator-max-microvolt = <1304000>;
	353	};
354
355	vreg_l8a_0p664: l8 {
93743d24 TR	356	regulator-min-microvolt = <640000>;
93743d24 TR	357	regulator-max-microvolt = <640000>;
53633a89 TR	358	};
	359
	360	vreg_l9a_1p8: l9 {
	361	regulator-min-microvolt = <1800000>;
93743d24 TR	362	regulator-max-microvolt = <1800000>;
93743d24 TR	363	regulator-allow-set-load;
53633a89 TR	364	};
	365
	366	vreg_l10a_1p8: l10 {
	367	regulator-min-microvolt = <1704000>;
	368	regulator-max-microvolt = <1904000>;
	369	};
	370
	371	vreg_l11a_1p8: l11 {
	372	regulator-min-microvolt = <1704000>;
	373	regulator-max-microvolt = <1952000>;
	374	regulator-allow-set-load;
	375	};
	376
	377	vreg_l12a_1p8: l12 {
	378	regulator-min-microvolt = <1624000>;
	379	regulator-max-microvolt = <1984000>;
	380	};
	381
	382	vreg_l13a_1p8: l13 {
	383	regulator-min-microvolt = <1504000>;
	384	regulator-max-microvolt = <1952000>;
	385	};
	386
	387	vreg_l14a_1p8: l14 {
	388	regulator-min-microvolt = <1704000>;
	389	regulator-max-microvolt = <1904000>;
	390	};
	391
	392	vreg_l15a_3p128: l15 {
	393	regulator-min-microvolt = <2920000>;
	394	regulator-max-microvolt = <3232000>;
	395	};
	396
	397	vreg_l16a_1p3: l16 {
	398	regulator-min-microvolt = <1704000>;
	399	regulator-max-microvolt = <1904000>;
93743d24	400	regulator-allow-set-load;
53633a89 TR	401	};
	402
	403	vreg_l17a_1p3: l17 {
	404	regulator-min-microvolt = <1152000>;
	405	regulator-max-microvolt = <1384000>;
93743d24	406	regulator-allow-set-load;
53633a89 TR	407	};
	408
	409	vreg_l18a_1p232: l18 {
	410	regulator-min-microvolt = <1104000>;
	411	regulator-max-microvolt = <1312000>;
	412	};
	413
	414	vreg_l19a_1p8: l19 {
	415	regulator-min-microvolt = <1624000>;
	416	regulator-max-microvolt = <3304000>;
	417	};
	418
	419	vreg_l20a_1p8: l20 {
	420	regulator-min-microvolt = <1624000>;
	421	regulator-max-microvolt = <3304000>;
	422	};
	423
	424	vreg_l21a_2p704: l21 {
	425	regulator-min-microvolt = <2400000>;
	426	regulator-max-microvolt = <3600000>;
	427	};
	428
	429	vreg_l22a_2p96: l22 {
	430	regulator-min-microvolt = <2952000>;
	431	regulator-max-microvolt = <3304000>;
	432	regulator-system-load = <100000>;
	433	regulator-allow-set-load;
	434	};
	435
	436	vreg_l23a_3p3: l23 {
93743d24 TR	437	regulator-min-microvolt = <3312000>;
	438	regulator-max-microvolt = <3312000>;
	439	regulator-allow-set-load;
53633a89 TR	440	};
	441
	442	vreg_l24a_2p96: l24 {
	443	regulator-min-microvolt = <2704000>;
	444	regulator-max-microvolt = <3600000>;
	445	regulator-system-load = <100000>;
	446	regulator-allow-set-load;
	447	};
	448	};
	449	};
	450
	451	&sdhc_1 {
	452	pinctrl-0 = <&sdc1_state_on>;
	453	pinctrl-1 = <&sdc1_state_off>;
	454	pinctrl-names = "default", "sleep";
	455
	456	vmmc-supply = <&vreg_l24a_2p96>;
	457	vqmmc-supply = <&vreg_l11a_1p8>;
	458	no-sdio;
	459	non-removable;
	460
	461	status = "okay";
	462	};
	463
	464	&sdhc_2 {
	465	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */
	466
	467	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
	468	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
	469	pinctrl-names = "default", "sleep";
	470
	471	vmmc-supply = <&vreg_l22a_2p96>;
	472	vqmmc-supply = <&vreg_l5a_2p96>;
	473	no-sdio;
	474
	475	status = "okay";
	476	};
	477
	478	&spi5 {
	479	status = "okay";
	480
	481	can@0 {
	482	compatible = "microchip,mcp2518fd";
	483	reg = <0>;
	484	interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
	485	clocks = <&clk40M>;
	486	spi-max-frequency = <10000000>;
	487	vdd-supply = <&vdc_5v>;
	488	xceiver-supply = <&vdc_5v>;
	489	};
	490	};
	491
	492	&sleep_clk {
	493	clock-frequency = <32000>;
	494	};
	495
	496	&tlmm {
	497	gpio-reserved-ranges = <43 2>, <49 1>, <54 1>,
	498	<56 3>, <61 2>, <64 1>,
	499	<68 1>, <72 8>, <96 1>;
	500
93743d24 TR	501	uart3_default: uart3-default-state {
	502	cts-pins {
	503	pins = "gpio8";
	504	function = "qup3";
	505	drive-strength = <2>;
	506	bias-bus-hold;
	507	};
	508
	509	rts-pins {
	510	pins = "gpio9";
	511	function = "qup3";
	512	drive-strength = <2>;
	513	bias-disable;
	514	};
	515
	516	tx-pins {
	517	pins = "gpio10";
	518	function = "qup3";
	519	drive-strength = <2>;
	520	bias-disable;
	521	};
	522
	523	rx-pins {
	524	pins = "gpio11";
	525	function = "qup3";
	526	drive-strength = <2>;
	527	bias-pull-up;
	528	};
	529	};
	530
	531	uart3_sleep: uart3-sleep-state {
	532	cts-pins {
	533	pins = "gpio8";
	534	function = "gpio";
	535	drive-strength = <2>;
	536	bias-bus-hold;
	537	};
	538
	539	rts-pins {
	540	pins = "gpio9";
	541	function = "gpio";
	542	drive-strength = <2>;
	543	bias-pull-down;
	544	};
	545
	546	tx-pins {
	547	pins = "gpio10";
	548	function = "gpio";
	549	drive-strength = <2>;
	550	bias-pull-up;
	551	};
	552
	553	rx-pins {
	554	pins = "gpio11";
	555	function = "gpio";
	556	drive-strength = <2>;
	557	bias-pull-up;
	558	};
	559	};
	560
53633a89 TR	561	lt9611_rst_pin: lt9611-rst-state {
	562	pins = "gpio41";
	563	function = "gpio";
	564	input-disable;
	565	output-high;
	566	};
	567
	568	lt9611_irq_pin: lt9611-irq-state {
	569	pins = "gpio46";
	570	function = "gpio";
	571	bias-disable;
	572	};
	573
	574	sdc2_card_det_n: sd-card-det-n-state {
	575	pins = "gpio88";
	576	function = "gpio";
	577	drive-strength = <2>;
	578	bias-pull-up;
	579	};
	580	};
	581
93743d24 TR	582	&uart3 {
	583	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
	584	<&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
	585	pinctrl-0 = <&uart3_default>;
	586	pinctrl-1 = <&uart3_sleep>;
	587	pinctrl-names = "default", "sleep";
	588	status = "okay";
	589
	590	bluetooth {
	591	compatible = "qcom,wcn3988-bt";
	592
	593	vddio-supply = <&vreg_l9a_1p8>;
	594	vddxo-supply = <&vreg_l16a_1p3>;
	595	vddrf-supply = <&vreg_l17a_1p3>;
	596	vddch0-supply = <&vreg_l23a_3p3>;
	597	enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
	598	max-speed = <3200000>;
	599	};
	600	};
	601
53633a89 TR	602	&uart4 {
	603	status = "okay";
	604	};
	605
	606	&usb {
	607	status = "okay";
	608	};
	609
	610	&usb_dwc3 {
	611	maximum-speed = "super-speed";
53633a89 TR	612	};
	613
	614	&usb_hsphy {
	615	vdd-supply = <&vreg_l4a_0p9>;
	616	vdda-pll-supply = <&vreg_l12a_1p8>;
	617	vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
	618
	619	status = "okay";
	620	};
	621
	622	&usb_qmpphy {
	623	vdda-phy-supply = <&vreg_l4a_0p9>;
	624	vdda-pll-supply = <&vreg_l12a_1p8>;
	625
	626	status = "okay";
	627	};
	628
93743d24 TR	629	&wifi {
	630	vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
	631	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
	632	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
	633	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
	634	qcom,ath10k-calibration-variant = "Thundercomm_RB2";
	635
	636	status = "okay";
	637	};
	638
53633a89 TR	639	&xo_board {
	640	clock-frequency = <19200000>;
	641	};