Problem: When :edit an existing buffer, line('w$') may return a
wrong result.
Solution: Reset w_valid in curwin_init() (Jaehwang Jung)
`do_ecmd()` reinitializes the current window (`curwin_init()`) whose
`w_valid` field may have `VALID_BOTLINE` set. Resetting `w_botline`
without marking it as invalid makes subsequent `validate_botline()`
calls a no-op, thus resulting in wrong `line('w$')` value.
closes: #14642
Signed-off-by: Jaehwang Jung <tomtomjhj@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0372: Calling CLEAR_FIELD() on the same struct twice
Problem: Calling CLEAR_FIELD() on the same struct twice.
Solution: Remove the second CLEAR_FIELD(). Move the assignment of
cookie.sourceing_lnum (zeertzjq).
closes: #14627
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0370: MS-Windows: patch number is zero in installer
Problem: MS-Windows: patch number is zero in installer
(jonathan-b-wiebe)
Solution: Set VIM_VERSION_PATCHLEVEL, fix a few typos in the installer
(RestorerZ)
fixes: #14629
closes: #14635
Signed-off-by: RestorerZ <restorer@mail2k.ru> Signed-off-by: Christian Brabandt <cb@256bit.org>
runtime(java): Improve the recognition of the "style" method declarations
- Request the new regexp engine (v7.3.970) for [:upper:] and
[:lower:].
- Recognise declarations of in-line annotated methods.
- Recognise declarations of _strictfp_ methods.
- Establish partial order for method modifiers as shown in
the MethodModifier production; namely, _public_ and
friends should be written the leftmost, possibly followed
by _abstract_ or _default_, or possibly followed by other
modifiers.
- Stop looking for parameterisable primitive types (void<?>,
int<Object>, etc., are malformed).
- Stop looking for arrays of _void_.
- Acknowledge the prevailing convention for method names to
begin with a small letter and for class/interface names to
begin with a capital letter; and, therefore, desist from
claiming declarations of enum constants and constructors
with javaFuncDef.
Rationale:
+ Constructor is distinct from method:
* its (overloaded) name is not arbitrary;
* its return type is implicit;
* its _throws_ clause depends on indirect vagaries of
instance (variable) initialisers;
* its invocation makes other constructors of its type
hierarchy invoked one by one, concluding with the
primordial constructor;
* its explicit invocation, via _this_ or _super_, can
only appear as the first statement in a constructor
(not anymore, see JEP 447); else, its _super_ call
cannot appear in constructors of _record_ or _enum_;
and neither invocation is allowed for the primordial
constructor;
* it is not a member of its class, like initialisers,
and is never inherited;
* it is never _abstract_ or _native_.
+ Constructor declarations tend to be few in number and
merit visual recognition from method declarations.
+ Enum constants define a fixed set of type instances
and more resemble class variable initialisers.
Note that the code duplicated for @javaFuncParams is written
keeping in mind for g:java_highlight_functions a pending 3rd
variant, which would require none of the :syn-cluster added
groups.
closes: #14620
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0369: Vim9: problem when importing autoloaded scripts
Problem: Vim9: problem when importing autoloaded scripts
Solution: In `:def` handle storing to vim9 autoload export
(Ernie Rael)
Problem occurs when `import autoload ./.../autoload/...`. The autoload
in the specified path causes the use of an autoload_prefix which combines
with the `import autoload` to create trouble.
In `generate_store_var()` `case dest_script` use ISN_STOREEXPORT,
when needed, instead of ISN_STORES. When executing ISN_STOREEXPORT,
check for autoload_prefix.
patch 9.1.0368: MS-Windows: Hard to define the Vim Patchlevel with leading zeroes
Problem: MS-Windows: Hard to define the Vim Patchlevel with leading
zeroes for the installer
Solution: re-define VIM_VERSION_PATCHLEVEL_STR with leading zeroes,
interpret Patchlevel as decimal in Make_mvc.mak
(RestorerZ)
closes: #14471
Signed-off-by: RestorerZ <restorer@mail2k.ru> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0365: Crash when typing many keys with D- modifier
Problem: Crash when typing many keys with D- modifier (after 9.1.0227).
Solution: Don't treat a 0x80 byte inside a special sequence as the start
of a special sequence (zeertzjq).
closes: #14613
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0363: tests: test_winfixbuf is a bit slow
Problem: tests: test_winfixbuf is a bit slow
Solution: use defer if possible, reset hidden option, use --not-a-term
when starting Vim using system() (Yegappan Lakshmanan)
closes: #14611
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0362: expanding rc config files does not work well
Problem: expanding rc config files does not work well
(Michał Sieroń, after v9.1.0327)
Solution: initialize chartab option, required to expand
evironment variables
fixes: #14597
Co-authored-by: author Signed-off-by: author Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0360: Vim9: does not handle autoloaded variables well
Problem: Vim9: does not handle autoloaded variables well
Solution: Better handle script-level exported variable references from
autoload files (Ernie Rael).
fixes: #14591
closes: #14607
Signed-off-by: Ernie Rael <errael@raelity.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0359: MS-Windows: relative import in a script sourced from a buffer doesn't work
Problem: MS-Windows: Relative import in a script sourced from a buffer
doesn't work (Ernie Rael)
Solution: Set a filename, so that we are not trying to use
script-relative filename (Yegappan Lakshmanan)
When a script is sourced from a buffer, the file name is set to ":source
buffer=". In MS-Windows, the ":" is a path separator character (used
after a drive letter). This results in the code trying to use the ":"
prefix to import the script on MS-Windows. To fix this, when importing a
script from a script sourced from a buffer with nofile, don't use
a script relative path name.
fixes #14588
closes: #14603
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0357: Page scrolling should place cursor at window boundaries
Problem: Page scrolling does not always place the cursor at the top or
bottom of the window (Mathias Rav)
Solution: Place the cursor at the top or bottom of the window.
(Luuk van Baal)
fixes: #14585
closes: #14586
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0353: tests: Test_autoload_import_relative_compiled fails on Windows
Problem: tests: Test_autoload_import_relative_compiled fails on Windows
Solution: Disable on Windows for now, add missing :bw for clean-up (Ernie Rael)
closes: #14579
Signed-off-by: Ernie Rael <errael@raelity.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
John Marriott [Thu, 18 Apr 2024 20:46:56 +0000 (22:46 +0200)]
patch 9.1.0352: Finding cmd modifiers and cmdline-specials is inefficient
Problem: Finding cmd modifiers and cmdline-specials is inefficient
Solution: Use binary search to find ex command modifiers and
cmdline-special characters and reduce the number of strlen()
(John Marriott)
closes: #14534
Signed-off-by: John Marriott <basilisk@internode.on.net> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0351: No test that completing a partial mapping clears 'showcmd'
Problem: No test that completing a partial mapping clears 'showcmd'.
Solution: Complete partial mappings in Test_showcmd_part_map() instead
of using :echo. Adjust some comments (zeertzjq).
closes: #14580
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0346: Patch v9.1.0338 fixed sourcing a script with import
Problem: Patch v9.1.0338 fixed sourcing a script with import
Solution: Add test `import './file.vim' and verify it works with `:source`
so it does not regress (Ernie Rael)
closes: #14577
Signed-off-by: Ernie Rael <errael@raelity.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Maxim Kim [Wed, 17 Apr 2024 20:29:06 +0000 (22:29 +0200)]
patch 9.1.0345: Problem: gvimrc not sourced from XDG_CONFIG_HOME
Problem: gvimrc not sourced from XDG_CONFIG_HOME (after v9.1.0327)
Solution: Also try to source from ~/.config/vim/gvimrc and
$XDG_CONFIG_HOME/vim/gvimrc (Maxim Kim)
fixes: #14567
closes: #14568
Signed-off-by: Maxim Kim <habamax@haba-debian.habamax> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0344: Cursor wrong after using setcellwidth() in terminal
Problem: Cursor wrong after using setcellwidth() in terminal
(mikoto2000)
Solution: output additional spaces, so the behaviour matches the GUI
(mikoto2000)
fixes: #14539
closes: #14540
Signed-off-by: mikoto2000 <mikoto2000@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Fix CUI `setcellwidths` characters draw behavior to same GUI behavior.
patch 9.1.0343: 'showcmd' wrong for partial mapping with multibyte
Problem: 'showcmd' is wrong for partial mapping with multibyte char,
and isn't very readable with modifyOtherKeys.
Solution: Decode multibyte char and merge modifiers into the char.
(zeertzjq)
This improves the following situations:
- Multibyte chars whose individual bytes are considered unprintable are
now shown properly in 'showcmd' area.
- Ctrl-W with modifyOtherKeys now shows ^W in 'showcmd' area.
The following situation may still need improvement:
- If the char is a special key or has modifiers that cannot be merged
into it, internal keycodes are shown in 'showcmd' area like before.
This applies to keys typed in Normal mode commands as well, and it's
hard to decide how to make it more readable due to the limited space
taken by 'showcmd', so I'll leave it for later.
closes: #14572
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
modifications with the goals of:
- simplifying structure by using group `cluster`s
- improving visual highlighting responsiveness by using `nextgroup`
- improving recursive wm-msg command highlighting
- separating command variants meant for runtime and for config only
closes: #14544
Signed-off-by: Josef Litoš <54900518+JosefLitos@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Matt Hammerly [Mon, 15 Apr 2024 16:54:38 +0000 (18:54 +0200)]
patch 9.1.0331: make install does not install all files
Problem: make install does not install all files (Nick Jensen)
Solution: Adjust the Makefile rule to install and uninstall cargo and
rust directories (Matt Hammerly)
fixes: #14551
closes: #14552
closes: #14557
Signed-off-by: Matt Hammerly <hammerly.matt@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0329: String interpolation fails for Dict type
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: #14529
closes: #14541
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI fails with t_?? test
Solution: use assert_match instead of assert_equal
and test only until t_xo, depending on system
there may be several more termcap codes coming
patch 9.1.0326: filetype: some requirements files are not recognized
Problem: filetype: some requirements files are not recognized
Solution: Detect '*-requirements.txt', 'constraints.txt',
'requirements.in', 'requirements/*.txt' and 'requires/*.txt'
as requirements filetype, include pip compiler, include
requirements filetype and syntax plugin
(Wu, Zhenyu, @raimon49)
patch 9.1.0322: filetype: some mail tools not recognized
Problem: filetype: some mail tools not recognized
Solution: Detect '.mbsncrc' as conf, '.msmtprc' as msmtp
and '.notmuch-config' as ini filetype
(Shane-XB-Qian)
closes: #14533
Signed-off-by: shane.xb.qian <shane.qian@foxmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Anton Sharonov [Sun, 14 Apr 2024 18:02:24 +0000 (20:02 +0200)]
patch 9.1.0321: Garbled output on serial terminals with XON/XOFF flow control
Problem: When used terminal with XON/XOFF flow control, vim tries to
still make CTRL-S mapping available, which results in severe
screen corruption, especially on large redraws, and even
spurious inputs (John Tsiombikas)
Solution: Disallow CTRL-S mapping if such terminal is recognized.
Don't remove IXON from the bitmask inversion.
(Anton Sharonov)
*** When started like this:
TERM=vt420 vim
:set termcap
shows "t_xon=y"
map <C-S> :echo "abc"<CR>
does nothing (after <C-S> output freezes and subsequent <C-Q>
unfreezes it)
*** When started like this:
TERM=xterm vim
:set termcap
shows "t_xon="
map <C-S> :echo "abc"<CR>
works (after <C-S> one see "abc" string echo-ed)
fixes: #12674
closes: #14542
Signed-off-by: Anton Sharonov <anton.sharonov@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
- Remove the already commented out and less general in its
definition javaFuncDef alternative.
- Stop recognising some bespoke {p,trace} debugging API.
Non-ASCII identifiers have been supported from the outset
of the Java language.
> An _identifier_ is an unlimited-length sequence of _Java
> letters_ and _Java digits_, the first of which must be a
> Java letter. An identifier cannot have the same spelling
> (Unicode character sequence) as a keyword . . . Boolean
> literal . . . or the null literal . . .
> . . . . . . . .
> Letters and digits may be drawn from the entire Unicode
> character set . . .
> . . . . . . . .
> A Java letter is a character for which the method
> Character.isJavaLetter . . . returns true. A Java
> letter-or-digit is a character for which the method
> Character.isJavaLetterOrDigit . . . returns true.
> . . . . . . . .
> The Java letters include . . . for historical reasons, the
> ASCII underscore (_) . . . and dollar sign ($) . . .
(Separate syntax tests will be written when particular parts
now touched will have been further improved.)
patch 9.1.0318: filetype: translate shell config files are not recognized
Problem: filetype: translate shell config files are not recognized
Solution: Detect 'init.trans', 'translate-shell' and '.trans' files as
clojure (Wu, Zhenyu)
patch 9.1.0316: filetype: some sh and confini files not recognized
Problem: filetype: some sh and confini files not recognized
Solution: Detect neofetch, '.xprofile', XDG-User-Dirs files,
paru and makepkg config files
(Wu, Zhenyu)
patch 9.1.0315: filetype: a few more dosini files are not recognized
Problem: filetype: a few more dosini files are not recognized
Solution: Detect wakatime, reply config files, flatpak, nfs config files
and a few more python tools as dosini (or toml)
(Wu, Zhenyu)
runtime(i3config): Line continuation is not detected for 'set' command (#14531)
Problem: Valid i3config syntax is highlighted as error.
Solution: Skip over line-breaks correctly.
Signed-off-by: Julio B <julio.bacel@gmail.com> Signed-off-by: Josef Litoš <54900518+JosefLitos@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0314: Vim9: Can define a class in a function
Problem: Vim9: Can define a class in a function
(Doug Kearns)
Solution: Give an error for a class defined in a function,
slightly reword some public error messages
(Yegappan Lakshmanan)
fixes: #13184
fixes: #13326
closes: #14537
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0313: Crash when using heredoc with comment in command block
Problem: Crash when using heredoc with comment in command block.
Solution: Handle a newline more like the end of the line, fix coverity
warning (zeertzjq).
patch 9.1.0310: Filler lines not checked properly in get_scroll_overlap()
Problem: Filler lines not checked properly in get_scroll_overlap().
Solution: Add missing parentheses (zeertzjq).
The missing parentheses causes the second argument to diff_check_fill()
to always be 0 as it is the result of a comparison between a positive
integer and -1 (the value of BACKWARD), in which case diff_check_fill()
always returns 0 instead of the number of filler lines above a line.
It's very hard to add a test for this, because this mistake at most
leads to 2 screen lines of difference in scrolling behavior, and in
cases where it may indeed lead to a difference in behavior, neither
behavior achieves complete symmetry between CTRL-F and CTRL-B.
closes: #14527
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
projects / thirdparty / vim.git / log
