]>
Commit | Line | Data |
---|---|---|
268a804d WD |
1 | commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7 |
2 | Author: Mike Frysinger <vapier@gentoo.org> | |
3 | Date: Tue Apr 8 14:00:57 2008 -0400 | |
4 | ||
5 | Add support for u-boot in svn and localversion-* files | |
6 | ||
7 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
8 | ||
9 | commit d23ff6827decf121461fbc5622612fd7effe207e | |
10 | Author: Guennadi Liakhovetski <lg@denx.de> | |
11 | Date: Thu Apr 3 17:04:22 2008 +0200 | |
12 | ||
13 | MX31ADS network and flash updates | |
14 | ||
15 | This patch allows U-Boot to use buffered writes to the Spansion NOR | |
16 | flash installed on this board, and eliminates long delays in network | |
17 | transfers after the board startup. | |
18 | ||
19 | Also modify flash layout to embed main and redundant environment | |
20 | blocks in the U-Boot image. | |
21 | ||
22 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
23 | ||
24 | commit b5dc9b304d289831f291843ff88a45cbdf1a6290 | |
25 | Author: Guennadi Liakhovetski <lg@denx.de> | |
26 | Date: Mon Apr 14 10:53:12 2008 +0200 | |
27 | ||
28 | Support for the MX31ADS evaluation board from Freescale | |
29 | ||
30 | This patch adds support for the MX31ADS evaluation board from Freescale, | |
31 | initialization code is copied from RedBoot sources, also provided by | |
32 | Freescale. | |
33 | ||
34 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
35 | ||
36 | commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04 | |
37 | Author: Anatolij Gustschin <agust@denx.de> | |
38 | Date: Thu Apr 17 18:18:00 2008 +0200 | |
39 | ||
40 | Fix crash on sequoia in ppc_4xx_eth_init | |
41 | ||
42 | Currently U-Boot crashes in ppc_4xx_eth_init on sequoia | |
43 | with cache enabled (TLB Parity exeption). This patch | |
44 | fixes the problem. | |
45 | ||
46 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
47 | ||
48 | commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b | |
49 | Author: Anatolij Gustschin <agust@denx.de> | |
50 | Date: Thu Apr 17 18:15:27 2008 +0200 | |
51 | ||
52 | ppc4xx: Fix crash on sequoia with cache enabled | |
53 | ||
54 | Currently U-Boot crashes on sequoia board in CPU POST if | |
55 | cache is enabled (CONFIG_4xx_DCACHE defined). The cache | |
56 | won't be disabled by change_tlb before CPU POST because | |
57 | there is an insufficient adress range check since | |
58 | CFG_MEM_TOP_HIDE was introduced. This patch tries to fix | |
59 | this problem. | |
60 | ||
61 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
62 | ||
63 | commit 43c509254fab375c49936498da944658117ed07c | |
64 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
65 | Date: Thu Apr 17 23:35:13 2008 +0900 | |
66 | ||
67 | Use jr as register jump instruction | |
68 | ||
69 | Current assembler codes are inconsistent in the way of register jump | |
70 | instruction usage; some use jr, some use j. Of course GNU as allows both | |
71 | usages, but as can be expected from `Jump Register' the mnemonic `jr' is | |
72 | more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage | |
73 | at all. | |
74 | ||
75 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
76 | ||
77 | commit 7ce63709828d37b08866e537339a169bd0db2bd3 | |
78 | Author: Guennadi Liakhovetski <lg@denx.de> | |
79 | Date: Tue Apr 15 14:15:30 2008 +0200 | |
80 | ||
81 | RTC driver for MC13783 | |
82 | ||
83 | MC13783 is a multifunction IS with an SPI interface to the host. This | |
84 | driver handles the RTC controller in this chip. | |
85 | ||
86 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
87 | ||
88 | commit 38254f45b0b412332726c90d3184ad47479fcffb | |
89 | Author: Guennadi Liakhovetski <lg@denx.de> | |
90 | Date: Tue Apr 15 14:14:25 2008 +0200 | |
91 | ||
92 | New i.MX31 SPI driver | |
93 | ||
94 | This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far | |
95 | only implemented and tested on i.MX31, can with a modified register layout | |
96 | and definitions be used for i.MX27, I think, MXC CPUs have similar SPI | |
97 | controllers too. | |
98 | ||
99 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
100 | ||
101 | commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38 | |
102 | Author: Magnus Lilja <lilja.magnus@gmail.com> | |
103 | Date: Tue Apr 15 19:09:10 2008 +0200 | |
104 | ||
105 | Fix name of i.MX31 boards in config file header | |
106 | ||
107 | Correct the name of the i.MX31 Litekit and phyCORE boards in config files. | |
108 | ||
109 | Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> | |
110 | ||
111 | commit a49864593e083a5d0779fb9ca98e5a0f2053183d | |
112 | Author: Mike Frysinger <vapier@gentoo.org> | |
113 | Date: Sun Apr 13 19:42:19 2008 -0400 | |
114 | ||
115 | allow ports to override go behavior | |
116 | ||
117 | Split the arch-specific logic out of the common go code and into a dedicated | |
118 | weak function called do_go_exec() that lives in cpu directories. This will | |
119 | need review from i386/nios people to make sure I didn't break them. | |
120 | ||
121 | commit 017e9b7925f74878d0e9475388cca9bda5ef9482 | |
122 | Author: Mike Frysinger <vapier@gentoo.org> | |
123 | Date: Sun Apr 13 19:42:18 2008 -0400 | |
124 | ||
125 | allow ports to override bootelf behavior | |
126 | ||
127 | Change the bootelf setup function into a dedicated weak function called | |
128 | do_bootelf_exec. This way ports can control the behavior however they | |
129 | like before/after calling the ELF entry point. | |
130 | ||
131 | commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7 | |
132 | Author: Ulf Samuelsson <ulf@atmel.com> | |
133 | Date: Sat Apr 12 20:56:03 2008 +0200 | |
134 | ||
135 | Reorder ARM boards in Makefile | |
136 | ||
137 | Rearrange ARM boards in Makefile so that ARM926EJ-S boards | |
138 | are no longer under ARM92xT header. | |
139 | ||
140 | Signed-off-by: Ulf Samuelsson <ulf@atmel.com> | |
141 | Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
142 | ||
143 | commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688 | |
144 | Author: Ulf Samuelsson <ulf@atmel.com> | |
145 | Date: Sat Apr 12 20:29:44 2008 +0200 | |
146 | ||
147 | Clean up dataflash partitioning | |
148 | ||
149 | This patch removes the board dependent parts from | |
150 | "drivers/mtd/dataflash.c". | |
151 | Each board relying on this, will have the appropriate | |
152 | code in a new file, "partition.c" in the board directory. | |
153 | board Makefiles updated to use the file. | |
154 | ||
155 | The dataflash partitions are aligned on sector/page boundaries. | |
156 | ||
157 | The CONFIG_NEW_DF_PARTITION was used to create named partitions | |
158 | This is now the default operation, and the CONFIG variable is removed. | |
159 | ||
160 | Signed-off-by: Ulf Samuelsson <ulf@atmel.com> | |
161 | ||
162 | commit 51ecde946fec511a16346e498204ca10ad71080d | |
163 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
164 | Date: Sat Apr 12 14:08:45 2008 +0200 | |
165 | ||
166 | gitignore: udpate stgit generated and .patch file | |
167 | ||
168 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
169 | ||
170 | commit 66e39818e95f51ee1c1dd2094407a8929543fa6d | |
171 | Author: Wolfgang Denk <wd@denx.de> | |
172 | Date: Fri Apr 18 00:15:36 2008 -0700 | |
173 | ||
174 | Get rid of redundant copy of renamed header file. | |
175 | ||
176 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
177 | ||
178 | commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc | |
179 | Author: Vlad Lungu <vlad@comsys.ro> | |
180 | Date: Fri Apr 11 21:20:14 2008 +0300 | |
181 | ||
182 | Fix dependency generation for older gcc versions | |
183 | ||
184 | With gcc 3.3.3 at least, compilation fails with | |
185 | ||
186 | Generating include/autoconf.mk | |
187 | gcc: compilation of header file requested | |
188 | make: *** [include/autoconf.mk] Error 1 | |
189 | ||
190 | since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba. | |
191 | ||
192 | Signed-off-by: Vlad Lungu <vlad@comsys.ro> | |
193 | ||
194 | commit cb1c4896905ab22fcd982e6a8a539f0031942e71 | |
195 | Author: Marian Balakowicz <m8@semihalf.com> | |
196 | Date: Fri Apr 11 11:07:49 2008 +0200 | |
197 | ||
198 | Restore the ability to continue booting after legacy image overwrite | |
199 | ||
200 | Before new uImage code was merged, bootm code allowed for the kernel image to | |
201 | get overwritten during decompresion. new uImage introduced a check for image | |
202 | overwrites and refused to boot the image that got overwritten. This patch | |
203 | restores the old behavior. It also adds a warning when the image overwriten is | |
204 | a multi-image file, because in such case accessing componentes other than the | |
205 | first one will fail. | |
206 | ||
207 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
208 | ||
209 | commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036 | |
210 | Author: Marian Balakowicz <m8@semihalf.com> | |
211 | Date: Fri Apr 11 11:07:43 2008 +0200 | |
212 | ||
213 | ppc: Fix ftd_blob variable init when processing raw blob | |
214 | ||
215 | Set fdt_blob variable before its value is printed out. | |
216 | ||
217 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
218 | ||
219 | commit 3d36be030043cd841a2551d00a395135e363a64b | |
220 | Author: Jason Wessel <jason.wessel@windriver.com> | |
221 | Date: Thu Apr 10 14:30:16 2008 -0500 | |
222 | ||
223 | Remove all the search paths from the .lds files. | |
224 | ||
225 | The cross compiler is responsible for providing the correct libraries | |
226 | and the logic to find the linking libraries. | |
227 | ||
228 | Signed-off-by: Jason Wessel <jason.wessel@windriver.com> | |
229 | ||
230 | commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58 | |
231 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
232 | Date: Mon Apr 14 15:44:16 2008 +0200 | |
233 | ||
234 | Boot-related documentation update | |
235 | ||
236 | - document 'bootm_low' and 'bootm_size' environment variables | |
237 | - update inaccurate CFG_BOOTMAPSZ entry | |
238 | ||
239 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
240 | ||
241 | commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a | |
242 | Author: Guennadi Liakhovetski <lg@denx.de> | |
243 | Date: Wed Apr 9 17:34:08 2008 +0200 | |
244 | ||
245 | Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code" | |
246 | ||
247 | Restore logic reverted by commit | |
248 | ||
249 | commit 80767a6cead9990d9e77e62be947843c2c72f469 | |
250 | Author: Peter Pearse <peter.pearse@arm.com> | |
251 | Date: Wed Sep 5 16:04:41 2007 +0100 | |
252 | ||
253 | Changed API name to coloured_led.h | |
254 | Removed code using deprecated ifdef CONFIG_BOOTBINFUNC | |
255 | Tidied other cpu/arm920t/start.S code | |
256 | ||
257 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
258 | ||
259 | commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf | |
260 | Author: Mike Frysinger <vapier@gentoo.org> | |
261 | Date: Tue Apr 8 10:24:24 2008 -0400 | |
262 | ||
263 | Remove conflicting NAND ID | |
264 | ||
265 | There are two NAND entries with ID 0xDC and this obviously causes problems. | |
266 | In the kernel, they punted the first entry, so we should do the same. | |
267 | ||
268 | See this upstream e-mail for more info: | |
269 | http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html | |
270 | ||
271 | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> | |
272 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
273 | ||
274 | commit 188e94c370621708d13547d58dbc6ed3c5602aa8 | |
275 | Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> | |
276 | Date: Tue Apr 8 16:20:35 2008 +0900 | |
277 | ||
278 | cpu/mips/cpu.c: Fix flush_cache bug | |
279 | ||
280 | Cache operations have to take line address (addr), not start_addr. | |
281 | I noticed this bug when debugging ping failure. | |
282 | ||
283 | Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> | |
284 | ||
285 | commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4 | |
286 | Author: Martin Krause <martin.krause@tqs.de> | |
287 | Date: Thu Apr 3 14:29:01 2008 +0200 | |
288 | ||
289 | TQM5200: fix default IDE reset level | |
290 | ||
291 | Before the first call of ide_reset(), the level of the IDE reset | |
292 | signal on the TQM5200 is low (reset asserted). This patch sets the | |
293 | default value to high (reset not asserted). | |
294 | ||
295 | Currently this patch fixes no real problem, but it is cleaner to | |
296 | assert the reset signal only on demand, and not permanently. | |
297 | ||
298 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
299 | ||
300 | commit c61e033d6e8abb7b4060ee36060961e1399f6079 | |
301 | Author: Detlev Zundel <dzu@denx.de> | |
302 | Date: Thu Apr 3 14:18:48 2008 +0200 | |
303 | ||
304 | mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING | |
305 | ||
306 | Signed-off-by: Detlev Zundel <dzu@denx.de> | |
307 | ||
308 | commit f308572e19eb7fe63aa3d41f214cde4c23c9800f | |
309 | Author: Detlev Zundel <dzu@denx.de> | |
310 | Date: Thu Apr 3 14:18:47 2008 +0200 | |
311 | ||
312 | mgcoge, mgsuv: rename 'addcon' to 'addcons' | |
313 | ||
314 | The latter name with 13 users is already established, so we will use | |
315 | that. | |
316 | ||
317 | Signed-off-by: Detlev Zundel <dzu@denx.de> | |
318 | ||
319 | commit e175eacc87c3a9e4dad0799fee0e95732520afc7 | |
320 | Author: Martin Krause <martin.krause@tqs.de> | |
321 | Date: Thu Apr 3 13:37:56 2008 +0200 | |
322 | ||
323 | IDE: fix bug in reset sequence | |
324 | ||
325 | According to the ata (ata5) specification the RESET- signal | |
326 | shall be asserted for at least 25 us. Without this patch, | |
327 | the RESET- signal is asserted on some boards for only < 1 us | |
328 | (e. g. on the TQM5200). This patch adds a general delay of | |
329 | 25 us to the RESET- signal. | |
330 | ||
331 | Without this patch a Platinum 4 GiB CF card is not recognised | |
332 | properly on boards with a TQM5200 (STK52xx, TB5200). | |
333 | ||
334 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
335 | ||
336 | commit 813bea96a960916c72b4a3a7df840151529c26ce | |
337 | Author: Sascha Laue <Sascha.Laue@gmx.biz> | |
338 | Date: Thu Apr 3 14:43:11 2008 +0200 | |
339 | ||
340 | lwmon5: disable CONFIG_ZERO_BOOTDELAY | |
341 | ||
342 | Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> | |
343 | ||
344 | commit 53eec6f1d25932e76d63ccb14082792b0b96bf41 | |
345 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
346 | Date: Wed Apr 2 08:03:58 2008 +0200 | |
347 | ||
348 | ds174x: Fix warning on return in rtc_get and rtc_set functions | |
349 | ||
350 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
351 | ||
352 | commit a253b38bf50c85227c33ca0febc870ee49d1588e | |
353 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
354 | Date: Wed Apr 2 08:03:57 2008 +0200 | |
355 | ||
356 | cmd_log.c: Fix assignment differ in signedness | |
357 | ||
358 | In function 'logbuff_init_ptrs': | |
359 | cmd_log.c:79: warning: pointer targets in assignment differ in signedness | |
360 | ||
361 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
362 | ||
363 | commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df | |
364 | Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> | |
365 | Date: Wed Apr 2 11:04:43 2008 +0530 | |
366 | ||
367 | Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c | |
368 | ||
369 | Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in> | |
370 | ||
371 | commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d | |
372 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
373 | Date: Tue Apr 1 14:07:10 2008 +0200 | |
374 | ||
375 | s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame | |
376 | ||
377 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
378 | ||
379 | commit c08fb3ea36d19b1640b7906264581e9105534399 | |
380 | Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
381 | Date: Tue Apr 15 10:24:14 2008 +0200 | |
382 | ||
383 | Additional PCI IDs for IDE and network controllers | |
384 | ||
385 | These PCI IDs are required by the Linkstation platforms. | |
386 | ||
387 | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
388 | ||
389 | commit c0559be371b2a64b1a817088c3308688e2182f93 | |
390 | Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> | |
391 | Date: Mon Apr 14 23:01:50 2008 +0200 | |
392 | ||
393 | Change env_get_char from a global function ptr to a function. | |
394 | ||
395 | This avoids an early global data reference. | |
396 | ||
397 | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
398 | ||
399 | commit 3e0f331c05d72f140715c1e9fca991927e44d422 | |
400 | Author: Guennadi Liakhovetski <lg@denx.de> | |
401 | Date: Tue Apr 29 12:35:08 2008 +0000 | |
402 | ||
403 | Clean up smsc911x driver | |
404 | ||
405 | Replace direct register address derefencing with accessor functions. | |
406 | Restrict explicitly 32-bit bus-width, extend affected configurations | |
407 | respectively. | |
408 | ||
409 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
410 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
411 | ||
412 | commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd | |
413 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
414 | Date: Tue Apr 15 00:08:20 2008 -0400 | |
415 | ||
416 | This patch adds a driver for the following smsc network controllers: | |
417 | LAN9115 | |
418 | LAN9116 | |
419 | LAN9117 | |
420 | LAN9215 | |
421 | LAN9216 | |
422 | LAN9217 | |
423 | ||
424 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
425 | Signed-off-by: Guennadi Liakhovetski<lg@denx.de> | |
426 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
427 | ||
428 | commit 3dfd4aab929cccddb63d9ea509967861e1333b52 | |
429 | Author: Sascha Laue <Sascha.Laue@gmx.biz> | |
430 | Date: Tue Apr 1 15:13:03 2008 +0200 | |
431 | ||
432 | Fix watchdog POST for lwmon5 | |
433 | ||
434 | If the hardware watchdog detects a voltage error, the watchdog sets | |
435 | GPIO62 to low. The watchdog POST has to detect this low level. | |
436 | ||
437 | Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i> | |
438 | ||
439 | commit 24b448448a917e52806f82660a5c9d47608894fb | |
440 | Author: Dave Liu <r63238@freescale.com> | |
441 | Date: Tue Apr 1 15:22:11 2008 +0800 | |
442 | ||
443 | ata: update the libata.h from ata.h of linux kernel | |
444 | ||
445 | Current libata.h of u-boot is out of sync from linux kernel, | |
446 | this patch make it be consistent with linux kernel. | |
447 | ||
448 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
449 | Signed-off-by: Tor Krill <tor@excito.com> | |
450 | ||
451 | commit f8f9dc98883f66f59eb0601da65808e6b139c87c | |
452 | Author: Kumar Gala <galak@kernel.crashing.org> | |
453 | Date: Mon Mar 31 11:59:27 2008 -0500 | |
454 | ||
455 | Allow use of ARCH=powerpc when building | |
456 | ||
457 | The linux kernel is now mostly ARCH=powerpc, so to make life easier | |
458 | allow use to use ARCH=powerpc and convert it to ARCH=ppc. | |
459 | ||
460 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
461 | ||
462 | commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0 | |
463 | Author: Kyungmin Park <kmpark@infradead.org> | |
464 | Date: Mon Mar 31 10:40:54 2008 +0900 | |
465 | ||
466 | Add apollon board MAINTAINERS entry | |
467 | ||
468 | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> | |
469 | ||
470 | commit 77e475cc0ed1832160017d364be32a0be9ff02a9 | |
471 | Author: Kyungmin Park <kmpark@infradead.org> | |
472 | Date: Mon Mar 31 10:40:36 2008 +0900 | |
473 | ||
474 | Fix OneNAND read | |
475 | ||
476 | It should access with 16-bit instead of 8-bit | |
477 | ||
478 | Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND. | |
479 | ||
480 | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> | |
481 | ||
482 | commit a9da2b41079d230db3a5641625311983f85ce1fb | |
483 | Author: Kyungmin Park <kmpark@infradead.org> | |
484 | Date: Mon Mar 31 10:40:19 2008 +0900 | |
485 | ||
486 | Fix OneNAND erase command | |
487 | ||
488 | It mis-calculates the block address. | |
489 | Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand. | |
490 | ||
491 | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> | |
492 | ||
493 | commit 61525f2ffa156665a66908fda47dbf29d65ea579 | |
494 | Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
495 | Date: Mon Mar 31 01:32:15 2008 +0200 | |
496 | ||
497 | Support for LinkStation / KuroBox HD and HG PPC models | |
498 | ||
499 | This patch is based on the port by Mihai Georgian (see linkstation.c for | |
500 | Copyright information) and implements support for LinkStation / KuroBox HD | |
501 | and HG PPC models from Buffalo Technology, whereby HD is deactivated at | |
502 | the moment, pending network driver fixing. | |
503 | ||
504 | Notice to users: this is pretty much a barebone port. Support for network | |
505 | on HG models is already in the U-Boot mainline, but you might also want | |
506 | patches to switch fan / phy modes depending on the negotiated ethernet | |
507 | parameters. This patch also doesn't support console switching, booting EM | |
508 | mode, Buffalo specific ext2 magic number. So, if you want to use any of | |
509 | those, you need additional patches. Otherwise this patche provides a fully | |
510 | functional u-boot with a network console on your system. | |
511 | ||
512 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
513 | ||
514 | commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea | |
515 | Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
516 | Date: Sun Mar 30 01:22:13 2008 -0500 | |
517 | ||
518 | Add CONFIG_MII_INIT support to related boards | |
519 | ||
520 | Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in | |
521 | cmd_init.c. Add CONFIG_MII_INIT to board configuration files | |
522 | that use mii_init() in cmd_init.c. | |
523 | ||
524 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
525 | Acked-by: Ben Warren <biggerbadderben@gmail.com> | |
526 | ||
527 | commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4 | |
528 | Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
529 | Date: Sun Mar 30 01:19:06 2008 -0500 | |
530 | ||
531 | Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards | |
532 | ||
533 | Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define | |
534 | CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files. | |
535 | ||
536 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
537 | ||
538 | commit e99ccb488181d012248c6be30b2093e950319fc5 | |
539 | Author: Kumar Gala <galak@kernel.crashing.org> | |
540 | Date: Thu Mar 27 11:46:38 2008 -0500 | |
541 | ||
542 | Introduce phys_size_t and move phys_addr_t into asm/types.h | |
543 | ||
544 | Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's | |
545 | that have larger physical addresses like 44x, 85xx, and 86xx. | |
546 | ||
547 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
548 | ||
549 | commit 20a14a42a25f72e379f38460b8a8484667536795 | |
550 | Author: Andy Fleming <afleming@freescale.com> | |
551 | Date: Wed Apr 2 16:19:07 2008 -0500 | |
552 | ||
553 | Rename include/md5.h to include/u-boot/md5.h | |
554 | ||
555 | Some systems have md5.h installed in /usr/include/. This isn't the | |
556 | desired file (we want the one in include/md5.h). This will avoid the | |
557 | conflict. This fixes the host tools building problem by creating a new | |
558 | directory for U-Boot specific header files. | |
559 | ||
560 | [Patch by Andy Fleming, modified to use separate directory by Wolfgang | |
561 | Denk] | |
562 | ||
563 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
564 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
565 | Acked-by: Timur Tabi <timur@freescale.com> | |
566 | ||
567 | commit f297b7a1ec87433f66320d89d993e1bc738c66b8 | |
568 | Author: Dave Liu <r63238@freescale.com> | |
569 | Date: Thu Mar 27 18:51:17 2008 +0800 | |
570 | ||
571 | drivers: code clean up | |
572 | ||
573 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
574 | ||
575 | commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597 | |
576 | Author: Dave Liu <r63238@freescale.com> | |
577 | Date: Thu Mar 27 18:50:41 2008 +0800 | |
578 | ||
579 | drivers: clean up the ata_piix.h | |
580 | ||
581 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
582 | ||
583 | commit e8f7ba404f1409606962815ecc955a06984b08b3 | |
584 | Author: Dave Liu <r63238@freescale.com> | |
585 | Date: Thu Mar 27 18:49:56 2008 +0800 | |
586 | ||
587 | doc: english polishing for README.sata | |
588 | ||
589 | according to gvb's suggestion, polishing for the doc. | |
590 | ||
591 | Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com> | |
592 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
593 | ||
594 | commit 3e3f766a5274d204780460e1879723b565296d34 | |
595 | Author: Kumar Gala <galak@kernel.crashing.org> | |
596 | Date: Wed Mar 26 18:53:28 2008 -0500 | |
597 | ||
598 | Fix warnings introduced by I2C bus speed setting patch | |
599 | ||
600 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
601 | ||
602 | commit 3c735e7437150e8615f26930c7819db85634276d | |
603 | Author: eran liberty <eran.liberty@gmail.com> | |
604 | Date: Thu Mar 27 00:50:49 2008 +0100 | |
605 | ||
606 | Altera Stratix II support | |
607 | ||
608 | Adds Support for Altera's Stratix II. | |
609 | ||
610 | Within your board specific init file you will have to call | |
611 | ||
612 | 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off); | |
613 | 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc); | |
614 | ||
615 | Altera_desc* contines (for example): | |
616 | { | |
617 | Altera_StratixII, /* part type */ | |
618 | passive_serial, /* interface type */ | |
619 | 1, /* bytes of data part can accept */ | |
620 | (void *)(&funcs), /* interface function table */ | |
621 | 0L, /* base interface address */ | |
622 | 0 /* implementation specific cookie */ | |
623 | } | |
624 | ||
625 | funcs is the interface. It is of type altera_board_specific_func. | |
626 | It looks like this: | |
627 | altera_board_specific_func func = { | |
628 | pre_fn, | |
629 | config_fn, | |
630 | status_fn, | |
631 | done_fn, | |
632 | clk_fn, | |
633 | data_fn, | |
634 | abort_fn, | |
635 | post_fn, | |
636 | }; | |
637 | ||
638 | you will have to implement these functions, which is usually bit | |
639 | banging some gpio. | |
640 | ||
641 | Signed-off-by: Eran Liberty <liberty@extricom.com> | |
642 | ||
643 | commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335 | |
644 | Author: Wolfgang Denk <wd@denx.de> | |
645 | Date: Sun Apr 13 14:32:54 2008 -0700 | |
646 | ||
647 | Update CHANGELOG | |
648 | ||
649 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
650 | ||
5ece9ec9 WD |
651 | commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7 |
652 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
653 | Date: Wed Mar 26 20:41:17 2008 +0100 | |
654 | ||
655 | Phytec Phycore-i.MX31 support | |
656 | ||
657 | This patch adds support for the Phytec Phycore-i.MX31 board | |
658 | ||
659 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
660 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
661 | ||
662 | commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1 | |
663 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
664 | Date: Wed Mar 26 20:41:09 2008 +0100 | |
665 | ||
666 | mx31 litekit support | |
667 | ||
668 | This patch adds support for the mx31 litekit board | |
669 | ||
670 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
671 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
672 | ||
673 | commit cdace0661208754a53019ea0dc7b803a040e0939 | |
674 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
675 | Date: Wed Mar 26 20:40:49 2008 +0100 | |
676 | ||
677 | add an i2c driver for mx31 | |
678 | ||
679 | This patch adds an i2c driver for Freescale i.MX processors | |
680 | ||
681 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
682 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
683 | ||
684 | commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6 | |
685 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
686 | Date: Wed Mar 26 20:40:42 2008 +0100 | |
687 | ||
688 | core support for Freescale mx31 | |
689 | ||
690 | This patch adds the core support for Freescale mx31 | |
691 | ||
692 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
693 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
694 | ||
695 | commit 7ec68862a27c8f6f6d566228de8f6724d964a939 | |
696 | Author: Wolfgang Denk <wd@denx.de> | |
697 | Date: Sun Apr 13 14:19:23 2008 -0700 | |
698 | ||
699 | Fix compile error | |
700 | ||
701 | ...as suggested by Peter Pearse | |
702 | ||
703 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
704 | ||
705 | commit 5252ed95204bdf55bec5a90ea69860bf2f78c643 | |
706 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
707 | Date: Wed Mar 26 20:40:36 2008 +0100 | |
708 | ||
709 | Separate omap24xx specific code from arm1136 | |
710 | ||
711 | Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 | |
712 | to cpu/arm1136/omap24xx. | |
713 | ||
714 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
715 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
716 | ||
717 | commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a | |
718 | Author: Mike Frysinger <vapier@gentoo.org> | |
719 | Date: Tue Jan 29 18:21:05 2008 -0500 | |
720 | ||
721 | disable caches before booting an app for Blackfin apps | |
722 | ||
723 | It isn't generally save to execute applications outside of U-Boot with caches | |
724 | enabled due to the way the Blackfin processor handles caches (requires | |
725 | software assistance). This patch disables caches before booting an ELF or | |
726 | just booting raw code. The previous discussion on the patch was that we | |
727 | wanted to use weaks instead, but that proved to not be feasible when multiple | |
728 | symbols are involved, which puts us back at the ifdef solution. I've | |
729 | minimized the ugliness by moving the setup step outside of the main function. | |
730 | ||
731 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
732 | ||
733 | commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32 | |
734 | Author: Wolfgang Denk <wd@denx.de> | |
735 | Date: Sun Apr 13 10:03:54 2008 -0700 | |
736 | ||
737 | ppc: Get rid of unused machine type definitions | |
738 | ||
739 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
740 | ||
741 | commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4 | |
742 | Author: Wolfgang Denk <wd@denx.de> | |
743 | Date: Sun Apr 13 09:59:26 2008 -0700 | |
744 | ||
745 | Coding Style cleanup; update CHANGELOG | |
746 | ||
747 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
748 | ||
1aeed8d7 WD |
749 | commit 7754f33c6fb7a2c050388d20bf3847038558bdcf |
750 | Author: Larry Johnson <lrj@acm.org> | |
751 | Date: Thu Feb 21 13:58:11 2008 -0500 | |
752 | ||
753 | LM73 bug fix for negative temperatures and cleanup | |
754 | ||
755 | When the LM73 temperature sensor measures a temperature below 0 C, the | |
756 | current driver does not perform sign extension, so the result returned is | |
757 | 512 C too high. This patch fixes the problem, and does general cleanup | |
758 | of the code. | |
759 | ||
760 | Signed-off-by: Larry Johnson <lrj@acm.org> | |
761 | ||
762 | commit 96ef831f713289afba19da0c8f905e99da2b23e0 | |
763 | Author: Guennadi Liakhovetski <lg@denx.de> | |
764 | Date: Thu Apr 3 13:36:02 2008 +0200 | |
765 | ||
766 | cfi_flash: Support buffered writes on non-standard Spansion NOR flash | |
767 | ||
768 | Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit | |
769 | series require different addresses for buffered write commands. Define a | |
770 | configuration option to support buffered writes on those chips. A more | |
771 | elegant solution would be to automatically detect those chips by parsing | |
772 | their CFI records, but that would require introduction of a fixup table | |
773 | into the cfi_flash driver. | |
774 | ||
775 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
776 | ||
777 | commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44 | |
778 | Author: Lee Nipper <lee.nipper@freescale.com> | |
779 | Date: Thu Apr 10 09:35:06 2008 -0500 | |
780 | ||
781 | mpc83xx: Update DIMM data bus width test to support 40-bit width | |
782 | ||
783 | 32-bit wide ECC memory modules report 40-bit width. | |
784 | Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'. | |
785 | ||
786 | Signed-off-by: Lee Nipper <lee.nipper@freescale.com> | |
787 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
788 | ||
789 | commit 5fb5a689d822ca61e814bd523fc930af335242fa | |
790 | Author: Dave Liu <r63238@freescale.com> | |
791 | Date: Mon Mar 31 17:05:12 2008 +0800 | |
792 | ||
793 | mpc83xx: Fix the bug of serdes initialization | |
794 | ||
795 | Currently the serdes will not be initializated due to the | |
796 | partid's error. | |
797 | ||
798 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
799 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
800 | ||
801 | commit 2000784818f043db7ca60e2846a72d097766b894 | |
802 | Author: Dave Liu <r63238@freescale.com> | |
803 | Date: Thu Apr 3 16:28:29 2008 +0800 | |
804 | ||
805 | mpc83xx: Fix the SATA clock setting of 837x targets | |
806 | ||
807 | Currently the SATA controller clock is configured as CSB clock, | |
808 | usually the CSB clock is 400/333/266MHz. | |
809 | ||
810 | However, The SATA IP block is only guaranteed to operate up to | |
811 | 200 MHz as stated in the HW spec. | |
812 | ||
813 | The bug is reported by Joe D'Abbraccio <ljd015@freescale.com> | |
814 | ||
815 | This patch makes the SATA clock as half of CSB clock. | |
816 | ||
817 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
818 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
819 | ||
820 | commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672 | |
821 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
822 | Date: Wed Apr 2 13:41:21 2008 +0200 | |
823 | ||
824 | mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb' | |
825 | ||
826 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
827 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
828 | ||
829 | commit 97b3ecb575a92fa34c1765229dbc06f2b662f139 | |
830 | Author: Kumar Gala <galak@kernel.crashing.org> | |
831 | Date: Wed Apr 9 04:20:57 2008 -0500 | |
832 | ||
833 | 85xx: Fix detection of MP cpu spin up | |
834 | ||
835 | We were looking at the wrong memory offset to determine of a secondary | |
836 | cpu had been spun up or not. Also added a warning message if the | |
837 | all the secondary cpus we expect don't spin up. | |
838 | ||
839 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
840 | ||
841 | commit f3e04bdc3f360c66801a9048956e61e41a16edba | |
842 | Author: Kumar Gala <galak@kernel.crashing.org> | |
843 | Date: Tue Apr 8 10:45:50 2008 -0500 | |
844 | ||
845 | 85xx: Use SVR_SOC_VER instead of SVR_VER | |
846 | ||
847 | The recent change introduced by 'Update SVR numbers to expand support' | |
848 | now requires that we use SVR_SOC_VER instead of SVR_VER if we want | |
849 | to compare against a particular processor id. | |
850 | ||
851 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
852 | ||
853 | commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7 | |
854 | Author: Eugene O'Brien <eugene.obrien@advantechamt.com> | |
855 | Date: Fri Apr 11 10:00:35 2008 -0400 | |
856 | ||
857 | ppc4xx: Fix power mgt definitions for PPC440 | |
858 | ||
859 | Corrected DCR addresses of PPC440EP power management registers. | |
860 | ||
861 | Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> | |
862 | ||
863 | commit 950a392464e616b4590bc4501be46e2d7d162dea | |
864 | Author: Wolfgang Denk <wd@denx.de> | |
865 | Date: Fri Apr 11 15:11:26 2008 +0200 | |
866 | ||
867 | Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18: | |
868 | ||
869 | Reverting became necessary after it turned out that the patches in | |
870 | the u-boot-arm repo were modified, and in some cases corrupted. | |
871 | ||
872 | This reverts the following commits: | |
873 | ||
874 | 066bebd6353e33af3adefc3404560871699e9961 | |
875 | 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 | |
876 | c88ae20580b2b01487b4cdcc8b2a113f551aee36 | |
877 | a147e56f03871bba4f05058d5e04ce7deb010b04 | |
878 | d6674e0e2a6a1f033945f78838566210d3f28c95 | |
879 | 8c8463cce44d849e37744749b32d38e1dfb12e50 | |
880 | c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d | |
881 | 8bf69d81782619187933a605f1a95ee1d069478d | |
882 | 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d | |
883 | a574a73852a527779234e73e17e7597fd8128882 | |
884 | 1377b5583a48021d983e1fd565f7d40c89e84d63 | |
885 | 1704dc20917b4f71e373e2c888497ee666d40380 | |
886 | ||
887 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
888 | ||
889 | commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13 | |
890 | Author: Stefan Roese <sr@denx.de> | |
891 | Date: Fri Apr 11 07:02:29 2008 +0200 | |
892 | ||
893 | ppc4xx: Update Kilauea defconfig to use device-tree booting as default | |
894 | ||
895 | This patch reworks the default environment on Kilauea/Haleakala. Now | |
896 | "net_nfs" for exmaple uses the device-tree style booting formerly know | |
897 | as "net_nfs_fdt". Also the addresses in RAM were changed because of the | |
898 | new image booting support, which check for image overwriting. So the | |
899 | addresses needed togeet adjusted. | |
900 | ||
901 | Signed-off-by: Stefan Roese <sr@denx.de> | |
902 | ||
903 | commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28 | |
904 | Author: Stefan Roese <sr@denx.de> | |
905 | Date: Wed Apr 9 11:58:02 2008 +0200 | |
906 | ||
907 | ppc4xx: Fix Canyonlands default environment to work with new image support | |
908 | ||
909 | Since the new image support checks for image overwriting, the default | |
910 | environment needs to get adjusted to use correct addresses. | |
911 | ||
912 | Signed-off-by: Stefan Roese <sr@denx.de> | |
913 | ||
914 | commit dfc6c7b647dba7ab86749616f0e9e5740deed422 | |
915 | Author: Stefan Roese <sr@denx.de> | |
916 | Date: Wed Apr 9 11:54:11 2008 +0200 | |
917 | ||
918 | ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE | |
919 | ||
920 | The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step | |
921 | closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But | |
922 | on 4xx systems _start currently cannot be used for this calculation. | |
923 | So revert back to the original version for now. | |
924 | ||
925 | Signed-off-by: Stefan Roese <sr@denx.de> | |
926 | ||
927 | commit f91374f65eae8b42cac329e06ba1c54728278efb | |
928 | Author: Michal Simek <monstr@monstr.eu> | |
929 | Date: Fri Mar 28 12:49:52 2008 +0100 | |
930 | ||
931 | microblaze: Sort microblaze boards in MAKEALL script | |
932 | ||
933 | commit 62032deb7214c6d9b4396297e2aaa559bc2f8495 | |
934 | Author: Michal Simek <monstr@monstr.eu> | |
935 | Date: Fri Mar 28 11:58:45 2008 +0100 | |
936 | ||
937 | microblaze: clean microblaze_config.mk | |
938 | ||
939 | FLAGS are generated by U-BOOT generator. | |
940 | Board specific FLAGS are in board directory | |
941 | ||
942 | Signed-off-by: Michal Simek <monstr@monstr.eu> | |
943 | ||
944 | commit cf5c679ca04a6b54bf53a55b8b9c29335b387287 | |
945 | Author: Michal Simek <monstr@monstr.eu> | |
946 | Date: Fri Mar 28 12:47:19 2008 +0100 | |
947 | ||
948 | microblaze: xupv2p fix config file for supporting FDT | |
949 | ||
950 | commit 188dc16b189143573b1ed90e584bf866d75cdd12 | |
951 | Author: Michal Simek <monstr@monstr.eu> | |
952 | Date: Fri Mar 28 11:53:02 2008 +0100 | |
953 | ||
954 | microblaze: ml401 fix config file for supporting FDT | |
955 | ||
956 | Signed-off-by: Michal Simek <monstr@monstr.eu> | |
957 | ||
958 | commit 4c6a6f02e239236261333759997eeaf86b30b54c | |
959 | Author: Michal Simek <monstr@monstr.eu> | |
960 | Date: Fri Mar 28 11:22:48 2008 +0100 | |
961 | ||
962 | microblaze: ml401 - add ifdef for GPIO | |
963 | ||
964 | Signed-off-by: Michal Simek <monstr@monstr.eu> | |
965 | ||
966 | commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7 | |
967 | Author: Michal Simek <monstr@monstr.eu> | |
968 | Date: Fri Mar 28 12:13:03 2008 +0100 | |
969 | ||
970 | microblaze: clean uart16550 and uartlite handling | |
971 | ||
972 | Signed-off-by: Michal Simek <monstr@monstr.eu> | |
973 | ||
974 | commit 0b20f250877441460fb79d72192954abe8498834 | |
975 | Author: Michal Simek <monstr@monstr.eu> | |
976 | Date: Fri Mar 28 11:08:31 2008 +0100 | |
977 | ||
978 | microblaze: Add Emaclite driver to Makefile | |
979 | ||
980 | Signed-off-by: Michal Simek <monstr@monstr.eu> | |
981 | ||
982 | commit 868cde5310f88234b774878e4f06e79df10a88b3 | |
983 | Author: Michal Simek <monstr@monstr.eu> | |
984 | Date: Fri Mar 28 11:08:01 2008 +0100 | |
985 | ||
986 | microblaze: Add Emac driver to Makefile | |
987 | ||
988 | Signed-off-by: Michal Simek <monstr@monstr.eu> | |
989 | ||
990 | commit 6f961b4f461f6cbb83a467d468a02e6078c2b327 | |
991 | Author: Michal Simek <monstr@monstr.eu> | |
992 | Date: Fri Mar 28 12:42:29 2008 +0100 | |
993 | ||
994 | microblaze: add Emac ethernet driver | |
995 | ||
996 | commit 89c53891b18cbafd29ab8931b40e27ad231b6085 | |
997 | Author: Michal Simek <monstr@monstr.eu> | |
998 | Date: Fri Mar 28 12:41:56 2008 +0100 | |
999 | ||
1000 | microblaze: add Emaclite ethernet driver | |
1001 | ||
1002 | commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb | |
1003 | Author: Michal Simek <monstr@monstr.eu> | |
1004 | Date: Fri Mar 28 11:04:01 2008 +0100 | |
1005 | ||
1006 | microblaze: ML401 and XUPV2P remove emac and emaclite reference | |
1007 | ||
1008 | Signed-off-by: Michal Simek <monstr@monstr.eu> | |
1009 | ||
1010 | commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57 | |
1011 | Author: Michal Simek <monstr@monstr.eu> | |
1012 | Date: Fri Mar 28 10:59:32 2008 +0100 | |
1013 | ||
1014 | microblaze: remove old setting for emac driver | |
1015 | ||
1016 | Signed-off-by: Michal Simek <monstr@monstr.eu> | |
1017 | ||
1018 | commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57 | |
1019 | Author: Michal Simek <monstr@monstr.eu> | |
1020 | Date: Fri Mar 28 10:58:15 2008 +0100 | |
1021 | ||
1022 | microblaze: Clean Makefile from ancient emac driver | |
1023 | ||
1024 | Signed-off-by: Michal Simek <monstr@monstr.eu> | |
1025 | ||
1026 | commit ab68f921d9c741830f721c3d879c13a0c5597183 | |
1027 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1028 | Date: Fri Mar 28 10:20:43 2008 +0100 | |
1029 | ||
1030 | SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information. | |
1031 | ||
1032 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1033 | ||
1034 | commit 6ed8a43a19bb0275501bc286007daafa923552cf | |
1035 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1036 | Date: Wed Mar 26 23:38:48 2008 +0100 | |
1037 | ||
1038 | SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information. | |
1039 | ||
1040 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1041 | ||
1042 | commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12 | |
1043 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1044 | Date: Wed Mar 26 23:34:47 2008 +0100 | |
1045 | ||
1046 | SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information. | |
1047 | ||
1048 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1049 | ||
1050 | commit 823edd8a66ed50af5aaba0c79567f67061e4d79a | |
1051 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1052 | Date: Fri Mar 28 10:06:52 2008 +0100 | |
1053 | ||
1054 | SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information. | |
1055 | ||
1056 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1057 | ||
1058 | commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135 | |
1059 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1060 | Date: Wed Mar 26 23:26:48 2008 +0100 | |
1061 | ||
1062 | SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information. | |
1063 | ||
1064 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1065 | ||
1066 | commit b330990c2f36ee4a8bb318360e1c8ba965269ab6 | |
1067 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1068 | Date: Fri Mar 28 10:00:33 2008 +0100 | |
1069 | ||
1070 | SPARC: Added support for SPARC LEON2 SOC Processor. | |
1071 | ||
1072 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1073 | ||
1074 | commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a | |
1075 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1076 | Date: Wed Mar 26 23:00:38 2008 +0100 | |
1077 | ||
1078 | SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version. | |
1079 | ||
1080 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1081 | ||
1082 | commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4 | |
1083 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1084 | Date: Wed Mar 26 22:51:29 2008 +0100 | |
1085 | ||
1086 | SPARC: Added support for SPARC LEON3 SOC processor. | |
1087 | ||
1088 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1089 | ||
1090 | commit bf3d8b31169546fcddb4737391e1893fb12d033a | |
1091 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1092 | Date: Fri Mar 28 08:29:26 2008 +0100 | |
1093 | ||
1094 | SPARC: added SPARC support for new uimage in common code. | |
1095 | ||
1096 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1097 | ||
1098 | commit 00ab32c85405a4fe65fd4128243086210fc90a21 | |
1099 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1100 | Date: Wed Mar 26 22:36:03 2008 +0100 | |
1101 | ||
1102 | SPARC: added SPARC board information to the command bdinfo. | |
1103 | ||
1104 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1105 | ||
1106 | commit c2f02da21a3f37f0878554eebc785e04fdc4e128 | |
1107 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1108 | Date: Fri Mar 28 09:47:00 2008 +0100 | |
1109 | ||
1110 | SPARC: Added generic support for SPARC architecture. | |
1111 | ||
1112 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1113 | ||
1114 | commit e54ec0f016803e4d9524ff71f7971bda0c51b287 | |
1115 | Author: Stefan Roese <sr@denx.de> | |
1116 | Date: Thu Apr 3 14:50:34 2008 +0200 | |
1117 | ||
1118 | ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3 | |
1119 | ||
1120 | This patch fixes a problem with the RGMII setup of the 460GT. The 460GT | |
1121 | has 2 RGMII instances and we need to configure the 2nd RGMII instance | |
1122 | for the EMAC2+3 channels. | |
1123 | ||
1124 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1125 | ||
1126 | commit c2a545ce33b26d80337f80b533828839249fb1c9 | |
1127 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1128 | Date: Wed Apr 2 08:03:56 2008 +0200 | |
1129 | ||
1130 | MPC8xx: Fix libfdt support introduced in commit 77ff7b74 | |
1131 | ||
1132 | fdt.c: In function 'ft_cpu_setup': | |
1133 | fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32' | |
1134 | fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32' | |
1135 | fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet' | |
1136 | fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory' | |
1137 | ||
1138 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1139 | ||
1140 | commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b | |
1141 | Author: Andy Fleming <afleming@freescale.com> | |
1142 | Date: Mon Mar 31 20:45:56 2008 -0500 | |
1143 | ||
1144 | Fix fdt set command to conform to dts spec | |
1145 | ||
1146 | The fdt set command was treating properties specified as <00> and <0011> | |
1147 | as byte streams, rather than as an array of cells. As we already have | |
1148 | syntax for expressing the desire for a stream of bytes ([ xx xx ...]), | |
1149 | we should use the <> syntax to describe arrays of cells, which are always | |
1150 | 32-bits per element. If we imagine this likely (IMHO) scenario: | |
1151 | ||
1152 | > fdt set /ethernet-phy@1 reg <1> | |
1153 | ||
1154 | With the old code, this would create a bad fdt, since the reg cell would be | |
1155 | made to be one byte in length. But the cell must be 4 bytes, so this would | |
1156 | break mysteriously. | |
1157 | ||
1158 | Also, the dts spec calls for constants inside the angle brackets (<>) | |
1159 | to conform to C constant standards as they pertain to base. | |
1160 | Take this scenario: | |
1161 | ||
1162 | > fdt set /ethernet@f00 reg <0xe250000\ 0x1000> | |
1163 | ||
1164 | The old fdt command would complain that it couldn't parse that. Or, if you | |
1165 | wanted to specify that a certain clock ran at 33 MHz, you'd be required to | |
1166 | do this: | |
1167 | ||
1168 | > fdt set /mydev clock <1f78a40> | |
1169 | ||
1170 | Whereas the new code will accept decimal numbers. | |
1171 | ||
1172 | While I was in there, I extended the fdt command parser to handle property | |
1173 | strings which are split across multiple arguments: | |
1174 | ||
1175 | > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 > | |
1176 | > fdt p /ethernet@f00 | |
1177 | ethernet@f00 { | |
1178 | interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>; | |
1179 | }; | |
1180 | ||
1181 | Lastly, the fdt print code was rearranged slightly to print arrays of cells | |
1182 | if the length of the property is a multiple of 4 bytes, and to not print | |
1183 | leading zeros. | |
1184 | ||
1185 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
1186 | ||
1187 | commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56 | |
1188 | Author: Stefan Roese <sr@denx.de> | |
1189 | Date: Wed Apr 2 08:39:33 2008 +0200 | |
1190 | ||
1191 | ppc4xx: Canyonlands: Init SATA/PCIe port correctly | |
1192 | ||
1193 | Canyonlands (460EX) shares the first PCIe interface with the SoC SATA | |
1194 | interface. This usage can be configured with the jumper J6. This patch | |
1195 | correctly configures the SATA/PCIe PHY for SATA usage when this jumper | |
1196 | is installed. | |
1197 | ||
1198 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1199 | ||
1200 | commit 6fe2946f198481254a6ee9600d7456b8316a4083 | |
1201 | Author: Kim Phillips <kim.phillips@freescale.com> | |
1202 | Date: Fri Mar 28 17:37:49 2008 -0500 | |
1203 | ||
1204 | remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code | |
1205 | ||
1206 | finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d, | |
1207 | "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T" | |
1208 | started. | |
1209 | ||
1210 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1211 | ||
1212 | commit b5873f1732b92a25690e1513b90dfb0d644f6697 | |
1213 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1214 | Date: Tue Apr 1 07:30:51 2008 +0200 | |
1215 | ||
1216 | dataflash: Move CONFIG_HAS_DATAFLASH to Makefile | |
1217 | ||
1218 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1219 | ||
1220 | commit 2d934ea51f276522b532f870a820e844ff480b5b | |
1221 | Author: Tor Krill <tor@excito.com> | |
1222 | Date: Fri Mar 28 15:29:45 2008 +0100 | |
1223 | ||
1224 | Add Vitesse 8601 support to TSEC driver | |
1225 | ||
1226 | Add phy_info for Vitesse VSC8601. | |
1227 | Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation. | |
1228 | ||
1229 | Signed-off-by: Tor Krill <tor@excito.com> | |
1230 | Reviewed-by: Kim Phillips <kim.phillips@freescale.com> | |
1231 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
1232 | ||
1233 | commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31 | |
1234 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1235 | Date: Mon Mar 31 14:25:00 2008 +0000 | |
1236 | ||
1237 | SPARC: added SMC91111 driver in and out macros for LEON processors. | |
1238 | ||
1239 | This patch makes SPARC/LEON processors able to read and write | |
1240 | to the SMC91111 chip using the chip external I/O bus of the memory | |
1241 | controller. This patchs defines the standard in and out macros | |
1242 | expected by the SMC9111 driver. | |
1243 | ||
1244 | To access that I/O bus one must set up the memory controller | |
1245 | (MCTRL or FTMCTRL) correctly. It is assumed that the user sets | |
1246 | up this correctly when the other MCTRL parameters are set up. It | |
1247 | can be set up from the board configuration header file. | |
1248 | ||
1249 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1250 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
1251 | ||
1252 | commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6 | |
1253 | Author: Stelian Pop <stelian@popies.net> | |
1254 | Date: Wed Mar 26 18:52:34 2008 +0100 | |
1255 | ||
1256 | Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards | |
1257 | ||
1258 | Signed-off-by: Stelian Pop <stelian@popies.net> | |
1259 | ||
1260 | commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3 | |
1261 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1262 | Date: Mon Mar 31 21:31:04 2008 +0200 | |
1263 | ||
1264 | AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile | |
1265 | ||
1266 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1267 | ||
1268 | commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7 | |
1269 | Author: Stelian Pop <stelian@popies.net> | |
1270 | Date: Wed Mar 26 18:52:33 2008 +0100 | |
1271 | ||
1272 | Add support for AT91SAM9260EK | |
1273 | ||
1274 | Support for booting from internal DataFlash, external DataFlash card | |
1275 | or NAND flash is available. | |
1276 | ||
1277 | Signed-off-by: Stelian Pop <stelian@popies.net> | |
1278 | ||
1279 | commit 1762f13b4aab88b685b1722f17dada247945624b | |
1280 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1281 | Date: Mon Mar 31 21:20:49 2008 +0200 | |
1282 | ||
1283 | AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile | |
1284 | ||
1285 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1286 | ||
1287 | commit 761712188b353494defb2b644491ff73d0daaa6f | |
1288 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1289 | Date: Mon Mar 31 21:12:17 2008 +0200 | |
1290 | ||
1291 | AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile | |
1292 | ||
1293 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1294 | ||
1295 | commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687 | |
1296 | Author: Stelian Pop <stelian@popies.net> | |
1297 | Date: Wed Mar 26 20:52:32 2008 +0100 | |
1298 | ||
1299 | Port AT91CAP9 to the new headers | |
1300 | ||
1301 | Adapt the existing AT91CAP9 code to the new headers and APIs. | |
1302 | ||
1303 | Signed-off-by: Stelian Pop <stelian@popies.net> | |
1304 | ||
1305 | commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa | |
1306 | Author: Stelian Pop <stelian@popies.net> | |
1307 | Date: Wed Mar 26 19:52:31 2008 +0100 | |
1308 | ||
1309 | Finish header files reworking | |
1310 | ||
1311 | Replace AT91CAP9.h file with several splitted header files coming | |
1312 | from the Linux kernel. | |
1313 | ||
1314 | This is part 2 of the replacement: more header imports and edits. | |
1315 | ||
1316 | Signed-off-by: Stelian Pop <stelian@popies.net> | |
1317 | ||
1318 | commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4 | |
1319 | Author: Stelian Pop <stelian@popies.net> | |
1320 | Date: Wed Mar 26 19:52:30 2008 +0100 | |
1321 | ||
1322 | Import several header files from Linux | |
1323 | ||
1324 | Replace AT91CAP9.h file with several splitted header files coming | |
1325 | from the Linux kernel. | |
1326 | ||
1327 | This is part 1 of the replacement: pristine header files import. | |
1328 | ||
1329 | Signed-off-by: Stelian Pop <stelian@popies.net> | |
1330 | ||
1331 | commit a8a78f2d99dc1bd30dc3595da118539b506c6118 | |
1332 | Author: Stelian Pop <stelian@popies.net> | |
1333 | Date: Wed Mar 26 20:52:28 2008 +0100 | |
1334 | ||
1335 | Move at91cap9 specific files to at91sam9 directory | |
1336 | ||
1337 | AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a | |
1338 | common infrastructure can be used. Let this infrastructure be | |
1339 | named after the AT91SAM9 family, and move the existing AT91CAP9 | |
1340 | files to the new place. | |
1341 | ||
1342 | Signed-off-by: Stelian Pop <stelian@popies.net> | |
1343 | ||
1344 | commit 61106a565870ff503f92b251b94bd7afef889a04 | |
1345 | Author: Stelian Pop <stelian@popies.net> | |
1346 | Date: Wed Mar 26 21:52:27 2008 +0100 | |
1347 | ||
1348 | Use timer_init() instead of board supplied interrupt_init() | |
1349 | ||
1350 | The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by | |
1351 | the board, so use timer_init() instead of interrupt_init(). | |
1352 | ||
1353 | Signed-off-by: Stelian Pop <stelian@popies.net> | |
1354 | ||
1355 | commit 5604e2178c5218fbfdba2e4293ca7652e829ac25 | |
1356 | Author: Stelian Pop <stelian@popies.net> | |
1357 | Date: Wed Mar 26 21:52:36 2008 +0100 | |
1358 | ||
1359 | Cleanup DataFlash partition handling | |
1360 | ||
1361 | DataFlash partition information has become a mess. This patch | |
1362 | defines a single partition scheme for Atmel DataFlashes. This partition | |
1363 | scheme will be used by all AT91CAP9 and AT91SAM9 boards. | |
1364 | ||
1365 | Signed-off-by: Stelian Pop <stelian@popies.net> | |
1366 | ||
1367 | commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42 | |
1368 | Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1369 | Date: Fri Mar 28 08:47:45 2008 -0500 | |
1370 | ||
1371 | ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S | |
1372 | ||
1373 | When the version_string function in start.S is not 4-byte align, | |
1374 | it will cause the compiler generates "unaligned opcodes detected | |
1375 | in executable segment". This issue affects all ColdFire CPUs. | |
1376 | By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if | |
1377 | it is not aligned. | |
1378 | ||
1379 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1380 | Acked-by: John Rigby <jrigby@freescale.com> | |
1381 | ||
1382 | commit bae61eefe15b4d454060a7140e49ae58322be803 | |
1383 | Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1384 | Date: Tue Mar 25 15:41:15 2008 -0500 | |
1385 | ||
1386 | ColdFire: Add dspi and serial flash support for MCF5445x | |
1387 | ||
1388 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1389 | Acked-by: John Rigby <jrigby@freescale.com> | |
1390 | ||
1391 | commit 48ead7a7a922fceaf494e352abfab8216a41b417 | |
1392 | Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1393 | Date: Tue Mar 18 17:37:01 2008 -0500 | |
1394 | ||
1395 | ColdFire: Remove R5200 board | |
1396 | ||
1397 | This board never went into production | |
1398 | ||
1399 | Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com> | |
1400 | Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1401 | Acked-by: John Rigby <jrigby@freescale.com> | |
1402 | ||
1403 | commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8 | |
1404 | Author: Matthew Fettke <[matthew.fettke@gmail.com]> | |
1405 | Date: Thu Jan 24 14:02:32 2008 -0600 | |
1406 | ||
1407 | ColdFire: Added M5275EVB support. | |
1408 | ||
1409 | Signed-off-by: Matthew Fettke <mfettke@videon-central.com> | |
1410 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1411 | Acked-by: John Rigby <jrigby@freescale.com> | |
1412 | ||
1413 | commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b | |
1414 | Author: Matthew Fettke <[matthew.fettke@gmail.com]> | |
1415 | Date: Mon Feb 4 15:38:20 2008 -0600 | |
1416 | ||
1417 | ColdFire: Added MCF5275 cpu support. | |
1418 | ||
1419 | Signed-off-by: Matthew Fettke <mfettke@videon-central.com> | |
1420 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1421 | Acked-by: John Rigby <jrigby@freescale.com> | |
1422 | ||
1423 | commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b | |
1424 | Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1425 | Date: Mon Mar 17 12:14:11 2008 -0500 | |
1426 | ||
1427 | ColdFire: Define bootdelay in configuration file for M52277EVB | |
1428 | ||
1429 | Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com> | |
1430 | Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1431 | Acked-by: John Rigby <jrigby@freescale.com> | |
1432 | ||
1433 | commit 77878f16cedee17161ff2336990970fffc6cea35 | |
1434 | Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1435 | Date: Mon Mar 17 12:09:07 2008 -0500 | |
1436 | ||
1437 | ColdFire: Fix second memory Chipselect for M5475EVB | |
1438 | ||
1439 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1440 | Acked-by: John Rigby <jrigby@freescale.com> | |
1441 | ||
1442 | commit 43d60642395a550956cb21d287c8cfa563913d28 | |
1443 | Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1444 | Date: Thu Mar 13 14:26:32 2008 -0500 | |
1445 | ||
1446 | ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282 | |
1447 | ||
1448 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1449 | Acked-by: John Rigby <jrigby@freescale.com> | |
1450 | ||
1451 | commit eb14ebe813a0cb5d47905228da446a5ad692473b | |
1452 | Author: Larry Johnson <lrj@acm.org> | |
1453 | Date: Sun Mar 30 20:33:04 2008 -0500 | |
1454 | ||
1455 | ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup | |
1456 | ||
1457 | Signed-off-by: Larry Johnson <lrj@acm.org> | |
1458 | ||
1459 | commit 02e3892021112f21067d9ed1d04ae4182725ba52 | |
1460 | Author: Stefan Roese <sr@denx.de> | |
1461 | Date: Mon Mar 31 12:20:48 2008 +0200 | |
1462 | ||
1463 | ppc4xx: Small whitespace fix of esd patches | |
1464 | ||
1465 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1466 | ||
1467 | commit 034394abb524785047c815f00dde8cdbdc1593c5 | |
1468 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
1469 | Date: Sun Mar 30 18:52:44 2008 +0200 | |
1470 | ||
1471 | ppc4xx: Cleanup PMC440 board support | |
1472 | ||
1473 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
1474 | ||
1475 | commit a6cc6c37188d85c25d167a4515da86f48d9a583e | |
1476 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
1477 | Date: Sun Mar 30 18:52:06 2008 +0200 | |
1478 | ||
1479 | ppc4xx: Add ptm configuration variables for PMC440 | |
1480 | ||
1481 | Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms | |
1482 | environment variables. | |
1483 | ||
1484 | Cleanup pci_target_init. | |
1485 | ||
1486 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
1487 | ||
1488 | commit 7c91f51a2fe296909147f1646a1412729dd10b1d | |
1489 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
1490 | Date: Sun Mar 30 18:01:15 2008 +0200 | |
1491 | ||
1492 | ppc4xx: Minor updates for DU440 boards | |
1493 | ||
1494 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
1495 | ||
1496 | commit d5bffeb868d6b4d462f558dac43011027b6644b7 | |
1497 | Author: Mike Frysinger <vapier@gentoo.org> | |
1498 | Date: Tue Feb 19 00:54:20 2008 -0500 | |
1499 | ||
1500 | Blackfin: cleanup and overhaul common board init functions | |
1501 | ||
1502 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1503 | ||
1504 | commit b86b3416f874358acaf07519e7620cdb2145f75b | |
1505 | Author: Mike Frysinger <vapier@gentoo.org> | |
1506 | Date: Tue Feb 19 00:50:58 2008 -0500 | |
1507 | ||
1508 | Blackfin: cleanup lib_blackfin/cache.c | |
1509 | ||
1510 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1511 | ||
1512 | commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44 | |
1513 | Author: Mike Frysinger <vapier@gentoo.org> | |
1514 | Date: Sun Mar 30 15:46:13 2008 -0400 | |
1515 | ||
1516 | Blackfin: unify cpu and boot modes | |
1517 | ||
1518 | All of the duplicated code for Blackfin processors and boot modes have been | |
1519 | unified. After all, the core is the same for all processors, just the | |
1520 | peripheral set differs (which gets handled in the drivers). | |
1521 | ||
1522 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1523 | ||
1524 | commit 880cc4381ea8360248cddcdf87a64566745a5724 | |
1525 | Author: Stelian Pop <stelian@popies.net> | |
1526 | Date: Wed Mar 26 22:52:35 2008 +0100 | |
1527 | ||
1528 | Fix CFG_NO_FLASH compilation. | |
1529 | ||
1530 | Many Atmel boards have no "real" (NOR) flash on board, and rely only | |
1531 | on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to | |
1532 | be present in a board configuration file, while still enabling flash | |
1533 | commands like 'flinfo', 'protect', etc. | |
1534 | ||
1535 | Signed-off-by: Stelian Pop <stelian@popies.net> | |
1536 | ||
1537 | commit 9ce7e53abd039decea1af67aec81bbd5df7a2593 | |
1538 | Author: Mike Frysinger <vapier@gentoo.org> | |
1539 | Date: Tue Feb 19 00:58:13 2008 -0500 | |
1540 | ||
1541 | Blackfin: BF537-stamp: cleanup spi flash driver | |
1542 | ||
1543 | This punts the old spi flash driver for a new/generalized one until the | |
1544 | common one can be integrated. | |
1545 | ||
1546 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1547 | ||
1548 | commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b | |
1549 | Author: Ben Warren <biggerbadderben@gmail.com> | |
1550 | Date: Sun Mar 30 11:34:34 2008 -0400 | |
1551 | ||
1552 | Fix macro typo in common/cmd_mii.c | |
1553 | ||
1554 | This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I | |
1555 | actually applied the wrong patch. | |
1556 | ||
1557 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
1558 | ||
1559 | commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d | |
1560 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1561 | Date: Sun Mar 30 16:39:53 2008 +0200 | |
1562 | ||
1563 | use correct at91rm9200 register name in m501sk board | |
1564 | ||
1565 | This fixes a naming bug for at91rm9200 lowlevel init code: | |
1566 | NOR boot flash is on chipselect 0, not chipselect 2. This | |
1567 | makes code use the register name from chip datasheets. | |
1568 | ||
1569 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1570 | ||
1571 | commit 480ed1dea103a1c8f4591afc77d2de3c7868d983 | |
1572 | Author: David Brownell <david-b@pacbell.net> | |
1573 | Date: Fri Jan 18 12:55:00 2008 -0800 | |
1574 | ||
1575 | use correct at91rm9200 register name | |
1576 | ||
1577 | This fixes a naming bug for at91rm9200 lowlevel init code: | |
1578 | NOR boot flash is on chipselect 0, not chipselect 2. This | |
1579 | makes code use the register name from chip datasheets. | |
1580 | ||
1581 | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> | |
1582 | ||
1583 | commit a3543d6dc52b0ba9c64016687cf32d600b31a476 | |
1584 | Author: David Brownell <david-b@pacbell.net> | |
1585 | Date: Fri Jan 18 12:45:45 2008 -0800 | |
1586 | ||
1587 | add missing ARM boards to MAKEALL | |
1588 | ||
1589 | Add some missing ARM boards to MAKEALL. These build correctly, | |
1590 | unlike several of the boards already listed. | |
1591 | ||
1592 | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> | |
1593 | ||
1594 | commit 066bebd6353e33af3adefc3404560871699e9961 | |
1595 | Author: Peter Pearse <peter.pearse@arm.com> | |
1596 | Date: Sun Mar 30 11:34:09 2008 +0100 | |
1597 | ||
1598 | Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c | |
1599 | to prevent compilation error. | |
1600 | ||
1601 | Signed-off-by: Peter Pearse <peter.pearse@arm.com> | |
1602 | ||
1603 | commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 | |
1604 | Author: Guennadi Liakhovetski <[lg@denx.de]> | |
1605 | Date: Sun Mar 30 11:32:30 2008 +0100 | |
1606 | ||
1607 | Support for the MX31ADS evaluation board from Freescale | |
1608 | ||
1609 | This patch adds support for the MX31ADS evaluation board from Freescale, | |
1610 | initialization code is copied from RedBoot sources, also provided by Freescale. | |
1611 | ||
1612 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
1613 | ||
1614 | commit c88ae20580b2b01487b4cdcc8b2a113f551aee36 | |
1615 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
1616 | Date: Sun Mar 30 11:32:27 2008 +0100 | |
1617 | ||
1618 | Phytec Phycore-i.MX31 support | |
1619 | ||
1620 | This patch adds support for the Phytec Phycore-i.MX31 board | |
1621 | ||
1622 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
1623 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
1624 | ||
1625 | commit a147e56f03871bba4f05058d5e04ce7deb010b04 | |
1626 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
1627 | Date: Sun Mar 30 11:32:24 2008 +0100 | |
1628 | ||
1629 | mx31 litekit support | |
1630 | ||
1631 | This patch adds support for the mx31 litekit board | |
1632 | ||
1633 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
1634 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
1635 | ||
1636 | commit d6674e0e2a6a1f033945f78838566210d3f28c95 | |
1637 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
1638 | Date: Sun Mar 30 11:32:21 2008 +0100 | |
1639 | ||
1640 | add SMSC LAN9x1x Network driver | |
1641 | ||
1642 | This patch adds a driver for the following smsc network controllers: | |
1643 | LAN9115 | |
1644 | LAN9116 | |
1645 | LAN9117 | |
1646 | LAN9215 | |
1647 | LAN9216 | |
1648 | LAN9217 | |
1649 | ||
1650 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
1651 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
1652 | ||
1653 | commit 8c8463cce44d849e37744749b32d38e1dfb12e50 | |
1654 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
1655 | Date: Sun Mar 30 11:32:16 2008 +0100 | |
1656 | ||
1657 | add an i2c driver for mx31 | |
1658 | ||
1659 | This patch adds an i2c driver for Freescale i.MX processors | |
1660 | ||
1661 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
1662 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
1663 | ||
1664 | commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d | |
1665 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
1666 | Date: Sun Mar 30 11:30:43 2008 +0100 | |
1667 | ||
1668 | core support for Freescale mx31 | |
1669 | ||
1670 | This patch adds the core support for Freescale mx31 | |
1671 | ||
1672 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
1673 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
1674 | ||
1675 | commit 8bf69d81782619187933a605f1a95ee1d069478d | |
1676 | Author: Sascha Hauer <s.hauer@pengutronix.de> | |
1677 | Date: Sun Mar 30 11:28:46 2008 +0100 | |
1678 | ||
1679 | Separate omap24xx specific code from arm1136 | |
1680 | ||
1681 | Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. | |
1682 | ||
1683 | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | |
1684 | Signed-off-by: Guennadi Liakhovetski <lg@denx.de> | |
1685 | ||
1686 | commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d | |
1687 | Author: Peter Pearse <peter.pearse@arm.com> | |
1688 | Date: Sun Mar 30 11:23:05 2008 +0100 | |
1689 | ||
1690 | Add pmdra into MAKEALL | |
1691 | ||
1692 | Signed-off-by: Peter Pearse <peter.pearse@arm.com> | |
1693 | ||
1694 | commit a574a73852a527779234e73e17e7597fd8128882 | |
1695 | Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> | |
1696 | Date: Sun Mar 30 11:21:58 2008 +0100 | |
1697 | ||
1698 | Adds support for the Prodrive PMDRA board, based on a DM6441 | |
1699 | ||
1700 | Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> | |
1701 | ||
1702 | commit 1377b5583a48021d983e1fd565f7d40c89e84d63 | |
1703 | Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> | |
1704 | Date: Sun Mar 30 11:11:34 2008 +0100 | |
1705 | ||
1706 | Removes all board specific code from the arch. part for DM644x (DaVinci) boards | |
1707 | ||
1708 | Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> | |
1709 | ||
1710 | commit 1704dc20917b4f71e373e2c888497ee666d40380 | |
1711 | Author: Dirk Behme <dirk.behme@gmail.com> | |
1712 | Date: Sun Mar 30 11:09:01 2008 +0100 | |
1713 | ||
1714 | - Remove *_masked() functions as noted by Wolfgang | |
1715 | - Adapt register naming to recent TI spec (sprue26, March 2007) | |
1716 | - Fix reset_timer() handling | |
1717 | - As reported by Pieter [1] the overflow fix introduced a | |
1718 | delay of factor 16 (e.g 2 seconds became 32). While the | |
1719 | overflow fix is basically okay, it missed to divide udelay by | |
1720 | 16, too. Fix this. | |
1721 | [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179 | |
1722 | - Remove software division of timer count value (DIV(x) | |
1723 | macro) and do it in hardware (TIM_CLK_DIV). | |
1724 | Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> | |
1725 | and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for | |
1726 | the hints & testing! | |
1727 | ||
1728 | Signed-off-by: Dirk Behme <dirk.behme@gmail.com> | |
1729 | ||
1730 | Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> | |
1731 | ||
1732 | commit ac3315c26e143c31680750c9c13f027efbcc887e | |
1733 | Author: Andre Schwarz <andre.schwarz@matrix-vision.de> | |
1734 | Date: Thu Mar 6 16:45:44 2008 +0100 | |
1735 | ||
1736 | new PHY @ e1000 - 2nd try | |
1737 | ||
1738 | Add 82541ER device with latest integrated IGP2 PHY. | |
1739 | Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom. | |
1740 | ||
1741 | Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> | |
1742 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
1743 | ||
1744 | commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8 | |
1745 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1746 | Date: Fri Mar 28 20:22:53 2008 +0100 | |
1747 | ||
1748 | SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver. | |
1749 | ||
1750 | GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without | |
1751 | a debug link (EDCL). The GRETH core is documented in GRIP.pdf | |
1752 | available at www.gaisler.com. | |
1753 | ||
1754 | If the GRETH has GigaBit support (GBIT, Scatter gather, checksum | |
1755 | offloading etc.) can be determined by a bit in the control register. | |
1756 | The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode. | |
1757 | ||
1758 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1759 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
1760 | ||
1761 | commit 233a8bcd94997f3f345833a3b82e836222f2a206 | |
1762 | Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com> | |
1763 | Date: Mon Mar 17 17:08:22 2008 -0500 | |
1764 | ||
1765 | Add CONFIG_MII_INIT in cmd_mii.c | |
1766 | ||
1767 | Provide common configuration in do_mii() to execute mii_init() | |
1768 | for all cpu architectures | |
1769 | ||
1770 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1771 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
1772 | ||
1773 | commit f605479de2deb11e834f31dfdb0af107c86aced6 | |
1774 | Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com> | |
1775 | Date: Mon Mar 17 17:08:16 2008 -0500 | |
1776 | ||
1777 | ColdFire: Fix FEC transmit issue for MCF5275 | |
1778 | ||
1779 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
1780 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
1781 | ||
1782 | commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746 | |
1783 | Author: Aras Vaichas <arasv@magtech.com.au> | |
1784 | Date: Wed Mar 26 09:43:57 2008 +1100 | |
1785 | ||
1786 | DHCP request fix for Windows Server 2003 | |
1787 | ||
1788 | Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional | |
1789 | delay before sending "DHCP Request" in net/bootp.c. Required to overcome | |
1790 | interoperability problems with Windows Server 200x DHCP server when U-Boot | |
1791 | client responds too fast for server to handle. | |
1792 | ||
1793 | Signed-off-by: Aras Vaichas <arasv@magtech.com.au> | |
1794 | Signed-off-by: Ben Warren <biggerbadderben@gmail.com> | |
1795 | ||
1796 | commit 97bf85d784fbed485e652eb907589ad0d5cb7262 | |
1797 | Author: Daniel Hellstrom <daniel@gaisler.com> | |
1798 | Date: Fri Mar 28 20:40:19 2008 +0100 | |
1799 | ||
1800 | MTD/CFI: flash_read64 is defined a weak function (for SPARC) | |
1801 | ||
1802 | SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address. | |
1803 | SPARC CPUs implement flash_read64 which calls __raw_readq. | |
1804 | ||
1805 | For current SPARC architectures (LEON2 and LEON3) each read from the | |
1806 | FLASH must lead to a cache miss. This is because FLASH can not be set | |
1807 | non-cacheable since program code resides there, and alternatively disabling | |
1808 | cache is poor from performance view, or doing a cache flush between each | |
1809 | read is even poorer. | |
1810 | ||
1811 | Forcing a cache miss on a SPARC is done by a special instruction "lda" - | |
1812 | load alternative space, the alternative space number (ASI) is processor | |
1813 | implementation spcific and can be found by including <asm/processor.h>. | |
1814 | ||
1815 | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> | |
1816 | ||
1817 | commit 70431e8a7393b6b793f77957f95b999fc9a269b8 | |
1818 | Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
1819 | Date: Fri Mar 28 15:41:25 2008 +0100 | |
1820 | ||
1821 | Make MPC83xx one step closer to full relocation. | |
1822 | ||
1823 | Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx | |
1824 | and use GOT relative reference. | |
1825 | ||
1826 | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
1827 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1828 | ||
1829 | commit 5b2793a3f3de34d439232b05acc8af67a028fd35 | |
1830 | Author: Michael Barkowski <michael.barkowski@freescale.com> | |
1831 | Date: Thu Mar 27 14:34:43 2008 -0400 | |
1832 | ||
1833 | mpc8323erdb: fix EEPROM page size and get MAC from EEPROM | |
1834 | ||
1835 | This patch fixes eeprom page size so that you can now write more than | |
1836 | 64 bytes at a time. | |
1837 | ||
1838 | It also makes the board take MAC addresses, if found, from EEPROM. | |
1839 | ||
1840 | User should place up to 4 addresses at offset 0x7f00, for | |
1841 | eth{,1,2,3}addr. Any unused addresses should be zero. This group of | |
1842 | four six-byte values should have it's CRC at the end. crc32 and | |
1843 | eeprom commands can be used to accomplish this. | |
1844 | ||
1845 | If CRC fails, MAC addresses come from the environment. If CRC | |
1846 | succeeds, the environment is overwritten at startup. | |
1847 | ||
1848 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> | |
1849 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1850 | ||
1851 | commit 8f325cff31f6e745e6540014b131b9a97f61944c | |
1852 | Author: Michael Barkowski <michael.barkowski@freescale.com> | |
1853 | Date: Fri Mar 28 15:15:38 2008 -0400 | |
1854 | ||
1855 | mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE | |
1856 | ||
1857 | Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB | |
1858 | controller on the PCI bus in Linux on the MPC8323ERDB. | |
1859 | ||
1860 | This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's | |
1861 | config file. | |
1862 | ||
1863 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> | |
1864 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1865 | ||
1866 | commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9 | |
1867 | Author: Kim Phillips <kim.phillips@freescale.com> | |
1868 | Date: Fri Mar 28 10:19:07 2008 -0500 | |
1869 | ||
1870 | mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code | |
1871 | ||
1872 | in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6, | |
1873 | 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing | |
1874 | and processor ID display. Add REVID_{MAJ,MIN}OR macros to make | |
1875 | REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR | |
1876 | convenience macros. | |
1877 | ||
1878 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1879 | ||
1880 | commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af | |
1881 | Author: Kim Phillips <kim.phillips@freescale.com> | |
1882 | Date: Fri Mar 28 10:18:53 2008 -0500 | |
1883 | ||
1884 | mpc83xx: display ddr frequency in board_add_ram_info banner | |
1885 | ||
1886 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1887 | ||
1888 | commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482 | |
1889 | Author: Kim Phillips <kim.phillips@freescale.com> | |
1890 | Date: Fri Mar 28 10:18:40 2008 -0500 | |
1891 | ||
1892 | mpc83xx: unreinvent mem_clk | |
1893 | ||
1894 | delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to | |
1895 | mem_*_clk for consistency's sake. | |
1896 | ||
1897 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1898 | ||
1899 | commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536 | |
1900 | Author: Kim Phillips <kim.phillips@freescale.com> | |
1901 | Date: Fri Mar 28 14:31:23 2008 -0500 | |
1902 | ||
1903 | mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards | |
1904 | ||
1905 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1906 | ||
1907 | commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393 | |
1908 | Author: Dave Liu <r63238@freescale.com> | |
1909 | Date: Wed Mar 26 22:57:19 2008 +0800 | |
1910 | ||
1911 | mpc83xx: enable the SATA interface on mpc837xemds board | |
1912 | ||
1913 | Enable the first two SATA interfaces on MPC837xEMDS board, | |
1914 | The two SATA ports are on LYNX1. (SATA0/1 on J4/5) | |
1915 | ||
1916 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
1917 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1918 | ||
1919 | commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a | |
1920 | Author: Dave Liu <r63238@freescale.com> | |
1921 | Date: Wed Mar 26 22:56:36 2008 +0800 | |
1922 | ||
1923 | mpc83xx: initialize serdes for MPC837xEMDS boards | |
1924 | ||
1925 | This patch is stolen from Anton Vorontsov's patch | |
1926 | for mpc837xerdb boards. | |
1927 | ||
1928 | The reference clk and xcorevdd voltage of serdes1/2 | |
1929 | is same between mpc837xemds and mpc837xerdb. | |
1930 | ||
1931 | 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE | |
1932 | 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE | |
1933 | 8379E: LYNX1- 2 SATA LYNX2- 2 SATA | |
1934 | ||
1935 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
1936 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
1937 | ||
1938 | commit cc8e839abc80887ae832767b5930d40edd6d7eb7 | |
1939 | Author: Stefan Roese <sr@denx.de> | |
1940 | Date: Fri Mar 28 14:09:04 2008 +0100 | |
1941 | ||
1942 | ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision | |
1943 | ||
1944 | Canyonlands (460EX) shares the first PCIe interface with the SoC SATA | |
1945 | interface. This usage can be configured with the jumper J6. This patch | |
1946 | displays the current configuration upon bootup and changes the PCIe | |
1947 | init loop, to only initialize the availabel PCIe slots. | |
1948 | ||
1949 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1950 | ||
1951 | commit 90447ecbbac8572457b6d8903073ac3f120995ba | |
1952 | Author: Tor Krill <tor@excito.com> | |
1953 | Date: Fri Mar 28 11:29:10 2008 +0100 | |
1954 | ||
1955 | MTD/CFI: Add support for 16bit legacy AMD flash | |
1956 | ||
1957 | Add entry for 512Kx16 AMD flash to jedec_table. | |
1958 | Read out 16bit device id if chipwidth is 16bit. | |
1959 | Fixed coding style after Stefans feedback | |
1960 | ||
1961 | Signed-off-by: Tor Krill <tor@excito.com> | |
1962 | ||
1963 | commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e | |
1964 | Author: Stefan Roese <sr@denx.de> | |
1965 | Date: Fri Mar 28 11:02:53 2008 +0100 | |
1966 | ||
1967 | ppc: Small change to CFG_MEM_TOP_HIDE description | |
1968 | ||
1969 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1970 | ||
1971 | commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00 | |
1972 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
1973 | Date: Thu Mar 27 15:44:12 2008 +0900 | |
1974 | ||
1975 | sh: Add support stat structure and stat.h | |
1976 | ||
1977 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
1978 | ||
1979 | commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09 | |
1980 | Author: Mark Jonas <toertel@gmail.com> | |
1981 | Date: Sat Mar 22 19:27:52 2008 +0100 | |
1982 | ||
1983 | sh: Removed warning when compiling drivers/serial/serial_sh.c. | |
1984 | ||
1985 | Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> | |
1986 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
1987 | ||
1988 | commit f309fa38929ffba71230c02330ffa42f4bba6333 | |
1989 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
1990 | Date: Wed Mar 12 18:02:57 2008 +0900 | |
1991 | ||
1992 | sh: Remove disable_ctrlc function from R7780MP | |
1993 | ||
1994 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
1995 | ||
1996 | commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3 | |
1997 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
1998 | Date: Wed Mar 12 17:55:15 2008 +0900 | |
1999 | ||
2000 | sh: Add maintainer of R7780MP to MAINTAINER file | |
2001 | ||
2002 | Update MAINTAINER entry for R7780MP. And fix maintainer's name. | |
2003 | ||
2004 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2005 | ||
2006 | commit f5e2466f7baa887a7df0c536333eea8231333497 | |
2007 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2008 | Date: Tue Mar 25 17:11:24 2008 +0900 | |
2009 | ||
2010 | sh: Add support Renesas Solutions R2D plus board | |
2011 | ||
2012 | R2D plus is SH reference board used with SH7751R. | |
2013 | This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface, | |
2014 | one PCI bus, VGA, and two Ethernet controller. | |
2015 | ||
2016 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2017 | ||
2018 | commit e92c95180bb5bc5fd4051598a9d60beaba48988d | |
2019 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2020 | Date: Wed Mar 12 12:15:29 2008 +0900 | |
2021 | ||
2022 | sh: Add support SH4 cache control | |
2023 | ||
2024 | Add support SH4 cache control and flash_cache function | |
2025 | ||
2026 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2027 | ||
2028 | commit 28e5efde4d925fcb34901d0030d0648de2da7e89 | |
2029 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2030 | Date: Mon Mar 24 01:53:01 2008 +0900 | |
2031 | ||
2032 | sh: Add support PCI host driver for SH7751/SH7751R | |
2033 | ||
2034 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2035 | ||
2036 | commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721 | |
2037 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2038 | Date: Mon Mar 24 02:11:26 2008 +0900 | |
2039 | ||
2040 | sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci | |
2041 | ||
2042 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2043 | ||
2044 | commit 566933278101c144d75361ea682678a326c1290d | |
2045 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2046 | Date: Wed Mar 12 12:10:28 2008 +0900 | |
2047 | ||
2048 | sh: Add support SuperH SH7751/SH7751R | |
2049 | ||
2050 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2051 | ||
2052 | commit 3313e0e26224fc9a0c445124f3455058c696df84 | |
2053 | Author: Mark Jonas <toertel@gmail.com> | |
2054 | Date: Mon Mar 10 11:37:10 2008 +0100 | |
2055 | ||
2056 | sh: Added support for SH7720 based board MPR2. | |
2057 | ||
2058 | Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> | |
2059 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2060 | ||
2061 | commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f | |
2062 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2063 | Date: Thu Mar 6 14:05:53 2008 +0900 | |
2064 | ||
2065 | sh: Fix receive FIFO level register of SH4A | |
2066 | ||
2067 | Receive FIFO level register is different in SH4A. | |
2068 | Because register is different, cannot occasionally receive data. | |
2069 | ||
2070 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2071 | ||
2072 | commit c133c1fb0b590662206b0eba70f4478ee0300a9a | |
2073 | Author: Yusuke Goda <goda.yusuke@renesas.com> | |
2074 | Date: Tue Mar 11 12:55:12 2008 +0900 | |
2075 | ||
2076 | sh: Add support Renesas Solutions R7780MP | |
2077 | ||
2078 | Renesas Solutions R7780MP is a reference board on SH7780. | |
2079 | This board has serial, 10/100 base Ethernet deivice, CF slot | |
2080 | and VGA devices. This board can set extension board. | |
2081 | Extension board has 10/100/1000 base Ethernet device, PCI slot, | |
2082 | S-ATA, iDVR slot. | |
2083 | ||
2084 | Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> | |
2085 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2086 | ||
2087 | commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28 | |
2088 | Author: Yusuke Goda <goda.yusuke@renesas.com> | |
2089 | Date: Wed Mar 5 14:30:02 2008 +0900 | |
2090 | ||
2091 | sh: Add support PCI of SuperH and SH7780 | |
2092 | ||
2093 | This patch add support PCI of SuperH base code and SH7780 specific code. | |
2094 | ||
2095 | Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> | |
2096 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2097 | ||
2098 | commit b55523efff2ae11f0b9ae3cc405893c32eb78156 | |
2099 | Author: Yusuke Goda <goda.yusuke@renesas.com> | |
2100 | Date: Wed Mar 5 14:23:26 2008 +0900 | |
2101 | ||
2102 | sh: Add support SH7780 | |
2103 | ||
2104 | SH7780 is CPU of Renesas Technology. | |
2105 | This CPU has | |
2106 | - CPU clock 400MHz | |
2107 | - PCI support | |
2108 | - DDR-SDRAM controller | |
2109 | - etc ... | |
2110 | ||
2111 | Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> | |
2112 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2113 | ||
2114 | commit c2042f5952a686c414031309b8f244513bf578f0 | |
2115 | Author: goda.yusuke <goda.yusuke@renesas.com> | |
2116 | Date: Fri Jan 25 20:46:36 2008 +0900 | |
2117 | ||
2118 | sh: Add support Renesas Solutions Migo-R board | |
2119 | ||
2120 | Migo-R is a board based on SH7722 and has may devices. | |
2121 | In this patch, supported SCIF, NOR flash and Ethernet. | |
2122 | ||
2123 | Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> | |
2124 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2125 | ||
2126 | commit 74d1e66d22dac91388bc538b2fe19f735edc5b82 | |
2127 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
2128 | Date: Thu Mar 27 15:06:40 2008 +0100 | |
2129 | ||
2130 | Fix host tool build breakage, take two | |
2131 | ||
2132 | Revert commit 87c8431f and fix build breakage so that the build continues | |
2133 | to work on FC systems. | |
2134 | ||
2135 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
2136 | ||
2137 | commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6 | |
2138 | Author: Stefan Roese <sr@denx.de> | |
2139 | Date: Wed Mar 19 09:36:47 2008 +0100 | |
2140 | ||
2141 | ppc4xx: Enable ECC on LWMON5 | |
2142 | ||
2143 | Since all ECC related problems seem to be resolved on LWMON5, this patch | |
2144 | now enables ECC support. | |
2145 | ||
2146 | We have to write the ECC bytes by zeroing and flushing in smaller | |
2147 | steps, since the whole 256MByte takes too long for the external | |
2148 | watchdog. | |
2149 | ||
2150 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2151 | ||
2152 | commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb | |
2153 | Author: Larry Johnson <lrj@acm.org> | |
2154 | Date: Mon Mar 17 11:10:35 2008 -0500 | |
2155 | ||
2156 | ppc4xx: Updates to Korat-specific code | |
2157 | ||
2158 | This patch contains updates for changes for the Korat PPC440EPx board. | |
2159 | These changes include: | |
2160 | ||
2161 | (1) Support for "permanent" and "upgradable" copies of U-Boot, as | |
2162 | described in the new "doc/README.korat" file; | |
2163 | ||
2164 | (2) a new memory map for the registers in the board's CPLD; | |
2165 | ||
2166 | (3) a revised format for manufacturer's data in serial EEPROM; and | |
2167 | ||
2168 | (4) changes to track updates to U-Boot for the Sequoia board. | |
2169 | ||
2170 | Signed-off-by: Larry Johnson <lrj@acm.org> | |
2171 | ||
2172 | commit f766cdf89b3a2a7634b8c5869f606150e332036c | |
2173 | Author: Markus Brunner <super.firetwister@gmail.com> | |
2174 | Date: Thu Mar 27 10:46:25 2008 +0100 | |
2175 | ||
2176 | ppc4xx: PPC405EP Set EMAC noise filter bits | |
2177 | ||
2178 | This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359 | |
2179 | which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally | |
2180 | disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set. | |
2181 | ||
2182 | Signed-off-by: Markus Brunner <super.firetwister@gmail.com> | |
2183 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2184 | ||
2185 | commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991 | |
2186 | Author: Mike Nuss <mike@terascala.com> | |
2187 | Date: Wed Feb 20 11:54:20 2008 -0500 | |
2188 | ||
2189 | ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx | |
2190 | ||
2191 | On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured | |
2192 | after startup to change the speed of the clocks. This patch adds the | |
2193 | option CFG_PLL_RECONFIG. If this option is set to 667, the CPU | |
2194 | initialization code will reconfigure the PLL to run the system with a CPU | |
2195 | frequency of 667MHz and PLB frequency of 166MHz, without the need for an | |
2196 | external EEPROM. | |
2197 | ||
2198 | Signed-off-by: Mike Nuss <mike@terascala.com> | |
2199 | Acked-by: Stefan Roese <sr@denx.de> | |
2200 | ||
2201 | commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1 | |
2202 | Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | |
2203 | Date: Thu Mar 27 09:12:40 2008 +0100 | |
2204 | ||
2205 | new-image: Fix host tool build breakage | |
2206 | ||
2207 | Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | |
2208 | ||
2209 | commit 6fb4b640562a10daff0dbe537638d511b5b48650 | |
2210 | Author: Stefan Roese <sr@denx.de> | |
2211 | Date: Thu Mar 27 10:24:03 2008 +0100 | |
2212 | ||
2213 | ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined | |
2214 | ||
2215 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2216 | ||
2217 | commit 9462732a3ec551c11862450902cd8ee1bedea6d9 | |
2218 | Author: Stefan Roese <sr@denx.de> | |
2219 | Date: Wed Mar 19 10:23:43 2008 +0100 | |
2220 | ||
2221 | ppc4xx: Add fdt support to Prodrive alpr | |
2222 | ||
2223 | Since this board will probably be ported to arch/powerpc in the | |
2224 | near future, we add device tree support now. This way we are | |
2225 | "ready" for arch/powerpc from now on. | |
2226 | ||
2227 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2228 | ||
2229 | commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150 | |
2230 | Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl> | |
2231 | Date: Mon Mar 17 09:27:56 2008 +0100 | |
2232 | ||
2233 | ppc4xx: Enable cache support on the ALPR board | |
2234 | ||
2235 | Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> | |
2236 | ||
2237 | commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69 | |
2238 | Author: Stefan Roese <sr@denx.de> | |
2239 | Date: Wed Mar 26 10:14:11 2008 +0100 | |
2240 | ||
2241 | ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched" | |
2242 | ||
2243 | If CFG_MEM_TOP_HIDE is defined in the board config header, this specified | |
2244 | memory area will get subtracted from the top (end) of ram and won't get | |
2245 | "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel | |
2246 | should gets passed the now "corrected" memory size and won't touch it | |
2247 | either. This should work for arch/ppc and arch/powerpc. Only Linux board | |
2248 | ports in arch/powerpc with bootwrapper support, which recalculate the | |
2249 | memory size from the SDRAM controller setup, will have to get fixed | |
2250 | in Linux additionally. | |
2251 | ||
2252 | This patch enables this config option on some PPC440EPx boards as a workaround | |
2253 | for the CHIP 11 errata. Here the description from the AMCC documentation: | |
2254 | ||
2255 | CHIP_11: End of memory range area restricted access. | |
2256 | Category: 3 | |
2257 | ||
2258 | Overview: | |
2259 | The 440EPx DDR controller does not acknowledge any | |
2260 | transaction which is determined to be crossing over the | |
2261 | end-of-memory-range boundary, even if the starting address is | |
2262 | within valid memory space. Any such transaction from any PLB4 | |
2263 | master will result in a PLB time-out on PLB4 bus. | |
2264 | ||
2265 | Impact: | |
2266 | In case of such misaligned bursts, PLB4 masters will not | |
2267 | retrieve any data at all, just the available data up to the | |
2268 | end of memory, especially the 440 CPU. For example, if a CPU | |
2269 | instruction required an operand located in memory within the | |
2270 | last 7 words of memory, the DCU master would burst read 8 | |
2271 | words to update the data cache and cross over the | |
2272 | end-of-memory-range boundary. Such a DCU read would not be | |
2273 | answered by the DDR controller, resulting in a PLB4 time-out | |
2274 | and ultimately in a Machine Check interrupt. The data would | |
2275 | be inaccessible to the CPU. | |
2276 | ||
2277 | Workaround: | |
2278 | Forbid any application to access the last 256 bytes of DDR | |
2279 | memory. For example, make your operating system believe that | |
2280 | the last 256 bytes of DDR memory are absent. AMCC has a patch | |
2281 | that does this, available for Linux. | |
2282 | ||
2283 | This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards: | |
2284 | lwmon5, korat, sequoia | |
2285 | ||
2286 | The other remaining 440EPx board were intentionally not included | |
2287 | since it is not clear to me, if they use the end of ram for some | |
2288 | other purpose. This is unclear, since these boards have CONFIG_PRAM | |
2289 | defined and even comments like this: | |
2290 | ||
2291 | PMC440.h: | |
2292 | /* esd expects pram at end of physical memory. | |
2293 | * So no logbuffer at the moment. | |
2294 | */ | |
2295 | ||
2296 | It is strongly recommended to not use the last 256 bytes on those | |
2297 | boards too. Patches from the board maintainers are welcome. | |
2298 | ||
2299 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2300 | ||
2301 | commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b | |
2302 | Author: Stefan Roese <sr@denx.de> | |
2303 | Date: Thu Mar 27 10:09:05 2008 +0100 | |
2304 | ||
2305 | ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT) | |
2306 | ||
2307 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2308 | ||
2309 | commit d56a3ce179688cde61073a3690e21703d68fafd7 | |
2310 | Author: Stefan Roese <sr@denx.de> | |
2311 | Date: Tue Mar 25 17:51:13 2008 +0100 | |
2312 | ||
2313 | ppc4xx: Correctly pass phyiscal FLASH base address into dtb | |
2314 | ||
2315 | The routine ft_board_setup() configures the EBC NOR mappings for the | |
2316 | Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from | |
2317 | 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS | |
2318 | problem, we need to pass the corrected address here too. | |
2319 | ||
2320 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2321 | ||
2322 | commit 9ad31989de12ce5c67b07c4867ead47465655c4b | |
2323 | Author: Stefan Roese <sr@denx.de> | |
2324 | Date: Wed Mar 19 16:35:12 2008 +0100 | |
2325 | ||
2326 | ppc4xx: Fix compilation warning in 4xx_enet.c | |
2327 | ||
2328 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2329 | ||
2330 | commit 4c9e855734c523900322a7c3cdd9099b4f51b51d | |
2331 | Author: Stefan Roese <sr@denx.de> | |
2332 | Date: Wed Mar 19 16:20:49 2008 +0100 | |
2333 | ||
2334 | ppc4xx: Add AMCC Glacier 406GT eval board support | |
2335 | ||
2336 | This patch adds support for the AMCC Glacier 460GT eval board. | |
2337 | The main difference to the Canyonlands board are listed here: | |
2338 | ||
2339 | - 4 ethernet ports instead of 2 | |
2340 | - no SATA port | |
2341 | - no USB port | |
2342 | ||
2343 | Currently EMAC2+3 are not working. This will be fixed in a later | |
2344 | release. | |
2345 | ||
2346 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2347 | ||
2348 | commit d8bd643141af4710d7f1b69bbab6b760de0af0a1 | |
2349 | Author: Stefan Roese <sr@denx.de> | |
2350 | Date: Thu Mar 27 08:47:26 2008 +0100 | |
2351 | ||
2352 | ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear | |
2353 | ||
2354 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2355 | ||
2356 | commit b9670dd85be6e0496ef2e231043c23cad9b1d903 | |
2357 | Author: Anatolij Gustschin <agust@denx.de> | |
2358 | Date: Wed Mar 26 21:05:43 2008 +0100 | |
2359 | ||
2360 | Fix out of tree building issue | |
2361 | ||
2362 | Currently U-Boot building in some external directory | |
2363 | doesn't work. This patch tries to fix the problem. | |
2364 | ||
2365 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
2366 | ||
2367 | commit d4ee711d8a5c366ee3f857c26b927d12e66614ff | |
2368 | Author: Anatolij Gustschin <agust@denx.de> | |
2369 | Date: Wed Mar 26 18:13:33 2008 +0100 | |
2370 | ||
2371 | README: update documentation (availability, links, etc.) | |
2372 | ||
2373 | Fix typo in README | |
2374 | ||
2375 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
2376 | ||
2377 | commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f | |
2378 | Author: Anatolij Gustschin <agust@denx.de> | |
2379 | Date: Wed Mar 26 17:47:44 2008 +0100 | |
2380 | ||
2381 | Fix compilation error in cmd_usb.c | |
2382 | ||
2383 | This patch fixes compilation error | |
2384 | cmd_usb.c: In function 'do_usb': | |
2385 | cmd_usb.c:552: error: void value not ignored as it ought to be | |
2386 | ||
2387 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
2388 | ||
2389 | commit d8c82db482d6b535d12b419d6440b88bf7091c9b | |
2390 | Author: Timur Tabi <timur@freescale.com> | |
2391 | Date: Fri Mar 14 17:45:29 2008 -0500 | |
2392 | ||
2393 | Add support for setting the I2C bus speed in fsl_i2c.c | |
2394 | ||
2395 | Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying | |
2396 | the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, | |
2397 | but fsl_i2c.c ignores it and uses conservative value when programming the | |
2398 | I2C bus speed. | |
2399 | ||
2400 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
2401 | Acked-by: Andy Fleming <afleming@freescale.com> | |
2402 | ||
2403 | commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e | |
2404 | Author: Wolfgang Denk <wd@denx.de> | |
2405 | Date: Thu Mar 27 00:03:57 2008 +0100 | |
2406 | ||
2407 | Coding style cleanup, update CHANGELOG | |
2408 | ||
2409 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2410 | ||
d049cc7f WD |
2411 | commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4 |
2412 | Author: Dave Liu <r63238@freescale.com> | |
2413 | Date: Wed Mar 26 22:55:32 2008 +0800 | |
2414 | ||
2415 | drivers: add the support for Freescale SATA controller | |
2416 | ||
2417 | Add the Freescale on-chip SATA controller driver to u-boot, | |
2418 | The SATA controller is used on the 837x and 8315 targets, | |
2419 | The driver can be used to load kernel, fs and dtb. | |
2420 | ||
2421 | The features list: | |
2422 | - 1.5/3 Gbps link speed | |
2423 | - LBA48, LBA28 support | |
2424 | - DMA and FPDMA support | |
2425 | - Two ports support | |
2426 | ||
2427 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2428 | ||
2429 | commit bede87f4c87c3ccd868cc60ebf792e0560c6d024 | |
2430 | Author: Dave Liu <r63238@freescale.com> | |
2431 | Date: Wed Mar 26 22:54:44 2008 +0800 | |
2432 | ||
2433 | ata: add the readme for SATA command line | |
2434 | ||
2435 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2436 | ||
2437 | commit cd54081cd479e542fc399b8a40651ff11a1ad849 | |
2438 | Author: Dave Liu <r63238@freescale.com> | |
2439 | Date: Wed Mar 26 22:53:24 2008 +0800 | |
2440 | ||
2441 | ata: enable the sata initialize on boot up | |
2442 | ||
2443 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2444 | ||
2445 | commit 69386383c5c2b323c66495b0b0cef6a9714d83bf | |
2446 | Author: Dave Liu <r63238@freescale.com> | |
2447 | Date: Wed Mar 26 22:52:36 2008 +0800 | |
2448 | ||
2449 | ata: add the fis struct for SATA | |
2450 | ||
2451 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2452 | ||
2453 | commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc | |
2454 | Author: Dave Liu <r63238@freescale.com> | |
2455 | Date: Wed Mar 26 22:51:44 2008 +0800 | |
2456 | ||
2457 | ata: add the libata support | |
2458 | ||
2459 | add simple libata support in u-boot | |
2460 | ||
2461 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2462 | ||
2463 | commit 8e9bb43429e50df55fa41932cbe65841ff579220 | |
2464 | Author: Dave Liu <r63238@freescale.com> | |
2465 | Date: Wed Mar 26 22:50:45 2008 +0800 | |
2466 | ||
2467 | ata: make the ata_piix driver using new SATA framework | |
2468 | ||
2469 | original ata_piix driver is using IDE framework, not real | |
2470 | SATA framework. For now, the ata_piix driver is only used | |
2471 | by x86 sc520_cdp board. This patch makes the ata_piix driver | |
2472 | use the new SATA framework, so | |
2473 | ||
2474 | - remove the duplicated command stuff | |
2475 | - remove the CONFIG_CMD_IDE define in the sc520_cdp.h | |
2476 | - add the CONFIG_CMD_SATA define to sc520_cdp.h | |
2477 | ||
2478 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2479 | ||
2480 | commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe | |
2481 | Author: Dave Liu <r63238@freescale.com> | |
2482 | Date: Wed Mar 26 22:49:44 2008 +0800 | |
2483 | ||
2484 | ata: add the support for SATA framework | |
2485 | ||
2486 | - add the SATA framework | |
2487 | - add the SATA command line | |
2488 | ||
2489 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2490 | ||
2491 | commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c | |
2492 | Author: Dave Liu <r63238@freescale.com> | |
2493 | Date: Wed Mar 26 22:48:18 2008 +0800 | |
2494 | ||
2495 | ata: merge the header of ata_piix driver | |
2496 | ||
2497 | move the sata.h from include/ to drivers/block/ata_piix.h | |
2498 | ||
2499 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2500 | ||
2501 | commit 9eef62804d9695425b24c87b46a61a7fa74afee0 | |
2502 | Author: Dave Liu <r63238@freescale.com> | |
2503 | Date: Wed Mar 26 22:47:06 2008 +0800 | |
2504 | ||
2505 | ata: merge the ata_piix driver | |
2506 | ||
2507 | move the cmd_sata.c from common/ to drivers/ata_piix.c, | |
2508 | the cmd_sata.c have some part of ata_piix controller drivers. | |
2509 | consolidate the driver to have better framework. | |
2510 | ||
2511 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2512 | ||
1aeed8d7 WD |
2513 | commit b9e749e95354f33eb5dc6653c6db7d502adb95fe |
2514 | Author: Markus Klotzbuecher <mk@denx.de> | |
2515 | Date: Wed Mar 26 18:26:43 2008 +0100 | |
2516 | ||
2517 | USB, Storage: fix a bug introduced in commit | |
2518 | f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info | |
2519 | to only print only information on one storage device, but not for | |
2520 | multiple. | |
2521 | ||
2522 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> | |
2523 | ||
2524 | commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360 | |
2525 | Author: Anatolij Gustschin <agust@denx.de> | |
2526 | Date: Wed Mar 26 17:47:44 2008 +0100 | |
2527 | ||
2528 | Fix compilation error in cmd_usb.c | |
2529 | ||
2530 | This patch fixes compilation error | |
2531 | cmd_usb.c: In function 'do_usb': | |
2532 | cmd_usb.c:552: error: void value not ignored as it ought to be | |
2533 | ||
2534 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
2535 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> | |
2536 | ||
2537 | commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15 | |
2538 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2539 | Date: Wed Mar 26 08:53:53 2008 -0500 | |
2540 | ||
2541 | 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page | |
2542 | ||
2543 | Provide a board_lmb_reserve helper function to ensure we reserve | |
2544 | the page of memory we are using for the boot page translation code. | |
2545 | ||
2546 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2547 | ||
2548 | commit 79679d80021ab095e639e250ca472fe526da02e2 | |
2549 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2550 | Date: Wed Mar 26 08:34:25 2008 -0500 | |
2551 | ||
2552 | 85xx: Update multicore boot mechanism to ePAPR v0.81 spec | |
2553 | ||
2554 | The following changes are needed to be inline with ePAPR v0.81: | |
2555 | ||
2556 | * r4, r5 and now always set to 0 on boot release | |
2557 | * r7 is used to pass the size of the initial map area (IMA) | |
2558 | * EPAPR_MAGIC value changed for book-e processors | |
2559 | * changes in the spin table layout | |
2560 | * spin table supports a 64-bit physical release address | |
2561 | ||
2562 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2563 | ||
2564 | commit 25eedb2c1958a13110c7de1fc809b624053cc69c | |
2565 | Author: Jon Loeliger <jdl@freescale.com> | |
2566 | Date: Wed Mar 19 15:02:07 2008 -0500 | |
2567 | ||
2568 | FSL: Clean up board/freescale/common/Makefile | |
2569 | ||
2570 | Each file that can be built here now follows some | |
2571 | CONFIG_ option so that they are appropriately built | |
2572 | or not, as needed. And CONFIG_ defines were added | |
2573 | to various board config files to make sure that happens. | |
2574 | ||
2575 | The other board/freescale/*/Makefiles no longer need | |
2576 | to reach up and over into ../common to build their | |
2577 | individually needed files any more. | |
2578 | ||
2579 | Boards that are CDS specific were renamed with cds_ prefix. | |
2580 | ||
2581 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
2582 | ||
2583 | commit a5af4b358a7caa9c0aa374d4d894bf762ec37669 | |
2584 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2585 | Date: Wed Feb 27 22:00:27 2008 -0600 | |
2586 | ||
2587 | 85xx: Fix merge duplication | |
2588 | ||
2589 | ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate. | |
2590 | ||
2591 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2592 | ||
2593 | commit 5893b3d0a4084f87a06a5d3dc03db91206818941 | |
2594 | Author: James Yang <James.Yang@freescale.com> | |
2595 | Date: Tue Feb 12 16:35:07 2008 -0600 | |
2596 | ||
2597 | 85xx: Expand CCSR space with more DDR controller registers. | |
2598 | ||
2599 | Signed-off-by: James Yang <James.Yang@freescale.com> | |
2600 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
2601 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2602 | ||
2603 | commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85 | |
2604 | Author: James Yang <James.Yang@freescale.com> | |
2605 | Date: Fri Feb 8 18:05:08 2008 -0600 | |
2606 | ||
2607 | 85xx: Speed up get_ddr_freq() and get_bus_freq() | |
2608 | ||
2609 | get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were | |
2610 | called. However, get_sys_info() recalculates extraneous information when | |
2611 | called each time. Have get_ddr_freq() and get_bus_freq() return memoized | |
2612 | values from global_data instead. | |
2613 | ||
2614 | Signed-off-by: James Yang <James.Yang@freescale.com> | |
2615 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2616 | ||
2617 | commit e9ea679918fbc9a53fa2f2a904aac874ea736036 | |
2618 | Author: James Yang <James.Yang@freescale.com> | |
2619 | Date: Fri Feb 8 16:46:27 2008 -0600 | |
2620 | ||
2621 | 85xx: Show DDR memory data rate in addition to the memory clock frequency. | |
2622 | ||
2623 | Show the DDR memory data rate in addition to the memory clock | |
2624 | frequency. For DDR/DDR2 memories the memory data rate is 2x the | |
2625 | memory clock. | |
2626 | ||
2627 | Signed-off-by: James Yang <James.Yang@freescale.com> | |
2628 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2629 | ||
2630 | commit 591933ca6eabc440e6ed6967233aaf56fce464a3 | |
2631 | Author: James Yang <James.Yang@freescale.com> | |
2632 | Date: Fri Feb 8 16:44:53 2008 -0600 | |
2633 | ||
2634 | 85xx: get_tbclk() speed up and rounding fix | |
2635 | ||
2636 | Speed up get_tbclk() by referencing pre-computed bus clock | |
2637 | frequency value from global data instead of sys_info_t. Fix | |
2638 | rounding of result to nearest; previously it was rounding | |
2639 | upwards. | |
2640 | ||
2641 | Signed-off-by: James Yang <James.Yang@freescale.com> | |
2642 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2643 | ||
2644 | commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6 | |
2645 | Author: Andy Fleming <afleming@freescale.com> | |
2646 | Date: Wed Feb 6 01:19:40 2008 -0600 | |
2647 | ||
2648 | Update SVR numbers to expand support | |
2649 | ||
2650 | FSL has taken to using SVR[16:23] as an SOC sub-version field. This | |
2651 | is used to distinguish certain variants within an SOC family. To | |
2652 | account for this, we add the SVR_SOC_VER() macro, and update the SVR_* | |
2653 | constants to reflect the larger value. We also add SVR numbers for all | |
2654 | of the current variants. Finally, to make things neater, rather than | |
2655 | use an enormous switch statement to print out the CPU type, we create | |
2656 | and array of SVR/name pairs (using a macro), and print out the CPU name | |
2657 | that matches the SVR SOC version. | |
2658 | ||
2659 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
2660 | ||
2661 | commit b83eef440cf3cef816172ccbb5897ccd8e403cf3 | |
2662 | Author: Andy Fleming <afleming@freescale.com> | |
2663 | Date: Wed Feb 6 01:12:57 2008 -0600 | |
2664 | ||
2665 | Add the Freescale PCI device IDs | |
2666 | ||
2667 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
2668 | ||
2669 | commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd | |
2670 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2671 | Date: Thu Feb 14 11:04:23 2008 -0600 | |
2672 | ||
2673 | 85xx: Added support for multicore boot mechanism | |
2674 | ||
2675 | Added the cpu command that provides a generic mechanism to get status, | |
2676 | reset, and release secondary cores in multicore processors. | |
2677 | ||
2678 | Added support for using the ePAPR defined spin-table mechanism on 85xx. | |
2679 | ||
2680 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2681 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
2682 | ||
2683 | commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64 | |
2684 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2685 | Date: Thu Jan 17 16:48:33 2008 -0600 | |
2686 | ||
2687 | 85xx: Added support for multicore boot mechanism | |
2688 | ||
2689 | Added the cpu command that provides a generic mechanism to get status, | |
2690 | reset, and release secondary cores in multicore processors. | |
2691 | ||
2692 | Added support for using the ePAPR defined spin-table mechanism on 85xx. | |
2693 | ||
2694 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2695 | ||
2696 | commit f69766e4b5d47ecd3aa58677a8da875694f364f2 | |
2697 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2698 | Date: Wed Jan 30 14:55:14 2008 -0600 | |
2699 | ||
2700 | 85xx: Add the concept of CFG_CCSRBAR_PHYS | |
2701 | ||
2702 | When we go to 36-bit physical addresses we need to keep the concept of | |
2703 | the physical CCSRBAR address seperate from the virtual one. | |
2704 | ||
2705 | For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR | |
2706 | ||
2707 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2708 | ||
d049cc7f WD |
2709 | commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e |
2710 | Author: Wolfgang Denk <wd@denx.de> | |
2711 | Date: Wed Mar 26 15:38:47 2008 +0100 | |
2712 | ||
2713 | Coding style cleanup. | |
2714 | ||
2715 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2716 | ||
2717 | commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660 | |
2718 | Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
2719 | Date: Wed Mar 26 13:02:13 2008 +0100 | |
2720 | ||
2721 | Add CFG_RTC_DS1337_NOOSC to turn off OSC output | |
2722 | ||
2723 | The default settings for RTC DS1337 keeps the OSC | |
2724 | output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to | |
2725 | turn it off. | |
2726 | ||
2727 | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
2728 | ||
2729 | commit 438a4c11260b4ea9805039b0b4f92f9df5306b02 | |
2730 | Author: Wolfgang Denk <wd@denx.de> | |
2731 | Date: Wed Mar 26 11:48:46 2008 +0100 | |
2732 | ||
2733 | Cleanup coding style, update CHANGELOG | |
2734 | ||
2735 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2736 | ||
438a4c11 WD |
2737 | commit 218ca724c08ca8a649f0917cf201cf23d4b33f39 |
2738 | Author: Wolfgang Denk <wd@denx.de> | |
2739 | Date: Wed Mar 26 10:40:12 2008 +0100 | |
2740 | ||
2741 | README: update documentation (availability, links, etc.) | |
2742 | ||
2743 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2744 | ||
2745 | commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 | |
2746 | Author: Aras Vaichas <arasv@magtech.com.au> | |
2747 | Date: Tue Mar 25 12:09:07 2008 +1100 | |
2748 | ||
2749 | USB Storage, add meaningful return value | |
2750 | ||
2751 | This patch changes the "usb storage" command to return success if it | |
2752 | finds a USB storage device, otherwise it returns error. | |
2753 | ||
2754 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> | |
2755 | ||
2756 | commit 18e69a35efbb078403db0c0063986470dad7d082 | |
2757 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2758 | Date: Fri Mar 14 23:20:18 2008 +0300 | |
2759 | ||
2760 | 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role | |
2761 | ||
2762 | Linux understands "host" (default), "peripheral" and "otg" (broken). | |
2763 | Though, U-Boot doesn't restrict dr_mode variable to these values (think | |
2764 | of renames in future). | |
2765 | ||
2766 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2767 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
2768 | ||
2769 | commit c7604783b236e368f225efb7b3efb418fe20b404 | |
2770 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2771 | Date: Fri Mar 14 23:20:30 2008 +0300 | |
2772 | ||
2773 | tsec: fix link detection for the RTL8211B PHY | |
2774 | ||
2775 | RTL8211B sets link state register after autonegotiation complete, | |
2776 | so with bootdelay=0 RTL8211B will report lack of the link. | |
2777 | ||
2778 | To fix this, we should wait for aneg to complete, even if the | |
2779 | link is currently down. | |
2780 | ||
2781 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2782 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
2783 | ||
2784 | commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4 | |
2785 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2786 | Date: Mon Mar 24 20:47:09 2008 +0300 | |
2787 | ||
2788 | mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups | |
2789 | ||
2790 | device_type = "soc" is being deprecated, newer device trees will use | |
2791 | "fsl,soc" and/or "fsl,immr" for the soc nodes. | |
2792 | ||
2793 | This patch also adds clock-frequency property for soc nodes (the same | |
2794 | value as bus-frequency). | |
2795 | ||
2796 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2797 | ||
2798 | commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07 | |
2799 | Author: Joe D'Abbraccio <ljd015@freescale.com> | |
2800 | Date: Mon Mar 24 13:00:59 2008 -0400 | |
2801 | ||
2802 | Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock | |
2803 | ||
2804 | With the original value of 1/2 clock cycle delay, the system ran relatively | |
2805 | stable except when we run benchmarks that are intensive users of memory. | |
2806 | When I run samba connected disk with a HDBENCH test, the system locks-up | |
2807 | or reboots sporadically. | |
2808 | ||
2809 | Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> | |
2810 | ||
2811 | commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923 | |
2812 | Author: Scott Wood <scottwood@freescale.com> | |
2813 | Date: Mon Mar 24 12:44:13 2008 -0500 | |
2814 | ||
2815 | mpc83xx: Set PCI I/O bus-address base to zero. | |
2816 | ||
2817 | The device trees for these boards describe PCI I/O as starting from | |
2818 | address zero from the device's perspective. | |
2819 | ||
2820 | Placing I/O elsewhere may cause problems with certain PCI boards, and may | |
2821 | cause problems with Linux. | |
2822 | ||
2823 | Signed-off-by: Scott Wood <scottwood@freescale.com> | |
2824 | ||
2825 | commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e | |
2826 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2827 | Date: Mon Mar 24 20:47:05 2008 +0300 | |
2828 | ||
2829 | mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK | |
2830 | ||
2831 | At least on the "33MHz Pilot" board crystal is actually 33.3MHz. | |
2832 | This patch fixes "system time drifting" problem. | |
2833 | ||
2834 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2835 | ||
2836 | commit 3a0cfdd576dc9b16d1468d37339182607c697fb7 | |
2837 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2838 | Date: Mon Mar 24 20:47:02 2008 +0300 | |
2839 | ||
2840 | mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS | |
2841 | ||
2842 | This is needed to update /choosen/linux,stdout-path properly. | |
2843 | ||
2844 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2845 | ||
2846 | commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9 | |
2847 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2848 | Date: Mon Mar 24 20:47:00 2008 +0300 | |
2849 | ||
2850 | mpc83xx: MPC8360E-RDK: add dhcp command | |
2851 | ||
2852 | Plus modify environment to use it and remove bootfile env variable, | |
2853 | it is internal and CONFIG_BOOTFILE is used for these purposes. | |
2854 | ||
2855 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2856 | ||
2857 | commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa | |
2858 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2859 | Date: Mon Mar 24 20:46:57 2008 +0300 | |
2860 | ||
2861 | mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc | |
2862 | ||
2863 | Current DDR setup easily causes memory corruption, this patch fixes it. | |
2864 | ||
2865 | Also fix TIMING_CFG0_MRS_CYC definition. | |
2866 | ||
2867 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2868 | ||
2869 | commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a | |
2870 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2871 | Date: Mon Mar 24 20:46:53 2008 +0300 | |
2872 | ||
2873 | mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI | |
2874 | ||
2875 | This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen | |
2876 | controller and FHCI (QE USB). | |
2877 | ||
2878 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2879 | ||
2880 | commit 7ad959490962e6842648d87d4bd795ea6cdcce67 | |
2881 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2882 | Date: Mon Mar 24 20:46:51 2008 +0300 | |
2883 | ||
2884 | mpc83xx: MPC8360E-RDK: add support for NAND | |
2885 | ||
2886 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2887 | ||
2888 | commit 9a3e832aeb491861d029991241572ebdf4b5b61b | |
2889 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2890 | Date: Mon Mar 24 20:46:46 2008 +0300 | |
2891 | ||
2892 | mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode | |
2893 | ||
2894 | This is needed for BCM PHYs to work on this board. | |
2895 | ||
2896 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2897 | ||
2898 | commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e | |
2899 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2900 | Date: Mon Mar 24 20:46:34 2008 +0300 | |
2901 | ||
2902 | uec: add support for Broadcom BCM5481 Gigabit PHY | |
2903 | ||
2904 | This patch adds basic support for Broadcom BCM5481 PHY. | |
2905 | ||
2906 | RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is | |
2907 | Peter Barada <peterb@logicpd.com>. | |
2908 | ||
2909 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2910 | ||
2911 | commit 6a600c3a1876bc203445df4f0fd6b12648259666 | |
2912 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2913 | Date: Mon Mar 24 20:46:28 2008 +0300 | |
2914 | ||
2915 | uec: add support for RGMII_RXID interface mode | |
2916 | ||
2917 | PHY drivers will use it to setup software delay between RXD and RXC | |
2918 | signals. | |
2919 | ||
2920 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2921 | ||
2922 | commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d | |
2923 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2924 | Date: Mon Mar 24 20:46:24 2008 +0300 | |
2925 | ||
2926 | uec: add support for gbit mii status readings | |
2927 | ||
2928 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2929 | ||
2930 | commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d | |
2931 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2932 | Date: Mon Mar 24 17:40:47 2008 +0300 | |
2933 | ||
2934 | 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards | |
2935 | ||
2936 | This is primarily for the early console support. | |
2937 | ||
2938 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2939 | ||
2940 | commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635 | |
2941 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2942 | Date: Mon Mar 24 17:40:43 2008 +0300 | |
2943 | ||
2944 | 83xx: initialize serdes for MPC837XRDB boards | |
2945 | ||
2946 | On the MPC8377ERDB: 2 SATA and 2 PCI-E. | |
2947 | On the MPC8378ERDB: 2 PCI-E | |
2948 | On the MPC8379ERDB: 4 SATA | |
2949 | ||
2950 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2951 | ||
2952 | commit 453316a2a19642d8afcbca7452e40a6b44a197b1 | |
2953 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2954 | Date: Mon Mar 24 17:40:32 2008 +0300 | |
2955 | ||
2956 | 83xx: serdes setup routines | |
2957 | ||
2958 | This patch adds few routines to configure serdes on 837x targets. | |
2959 | ||
2960 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2961 | ||
2962 | commit a796cdf9c377cb4e5d61d1079a296608f8fbd903 | |
2963 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2964 | Date: Mon Mar 24 17:40:27 2008 +0300 | |
2965 | ||
2966 | 83xx: split COBJS onto separate lines | |
2967 | ||
2968 | ..plus get rid of some #ifdefs in the .c files. | |
2969 | ||
2970 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2971 | ||
2972 | commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3 | |
2973 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2974 | Date: Mon Mar 24 17:40:23 2008 +0300 | |
2975 | ||
2976 | 83xx: nand support for MPC837XRDB boards | |
2977 | ||
2978 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
2979 | ||
2980 | commit 82e45a204190593e8613145a928f998fb8c909c4 | |
2981 | Author: Jerry Van Baren <gvb.uboot@gmail.com> | |
2982 | Date: Tue Mar 18 21:44:41 2008 -0400 | |
2983 | ||
2984 | Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS. | |
2985 | ||
2986 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
2987 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
2988 | ||
2989 | commit 0fa7a1b4719e325fce332689fb8754ec166191ff | |
2990 | Author: Michael Barkowski <michael.barkowski@freescale.com> | |
2991 | Date: Thu Mar 20 13:15:39 2008 -0400 | |
2992 | ||
2993 | mpc8323erdb: remove RTC and add EEPROM | |
2994 | ||
2995 | There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM. | |
2996 | ||
2997 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> | |
2998 | Acked-by: Kim Phillips <kim.phillips@freescale.com> | |
2999 | ||
3000 | commit 5bbeea86eb6afb872374cd23217cb3c1018443ed | |
3001 | Author: Michael Barkowski <michael.barkowski@freescale.com> | |
3002 | Date: Thu Mar 20 13:15:34 2008 -0400 | |
3003 | ||
3004 | mpc8323erdb: Improve the system performance | |
3005 | ||
3006 | The following changes are based on kernel UCC ethernet performance: | |
3007 | ||
3008 | 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode | |
3009 | 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT | |
3010 | switch to enable this setting. | |
3011 | ||
3012 | The following changes are based on the App Note AN3369 and | |
3013 | verified to improve memory latency using LMbench: | |
3014 | ||
3015 | 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0 | |
3016 | 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting | |
3017 | previously. | |
3018 | 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on | |
3019 | Twr=15ns, and this was already the setting in DDR_MODE) | |
3020 | 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on | |
3021 | Trp=15ns) | |
3022 | 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on | |
3023 | Tras=40ns) | |
3024 | 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on | |
3025 | Trcd=15ns) | |
3026 | 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on | |
3027 | Trfc=75ns) | |
3028 | 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based | |
3029 | on Tfaw=50ns) | |
3030 | 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based | |
3031 | on CL=3 and WL=2). | |
3032 | ||
3033 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> | |
3034 | Acked-by: Kim Phillips <kim.phillips@freescale.com> | |
3035 | ||
3036 | commit fc549c871f43933396a5b3e21d897023d4b31b8d | |
3037 | Author: Michael Barkowski <michael.barkowski@freescale.com> | |
3038 | Date: Thu Mar 20 13:15:28 2008 -0400 | |
3039 | ||
3040 | mpc8323erdb: use readable DDR config macros | |
3041 | ||
3042 | Use available shift/mask macros to define DDR configuration. | |
3043 | ||
3044 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> | |
3045 | Acked-by: Kim Phillips <kim.phillips@freescale.com> | |
3046 | ||
3047 | commit 89c7784ed90ba50301eec521144f95111e472906 | |
3048 | Author: Timur Tabi <timur@freescale.com> | |
3049 | Date: Fri Feb 8 13:15:55 2008 -0600 | |
3050 | ||
3051 | 83xx: Add Vitesse VSC7385 firmware uploading | |
3052 | ||
3053 | Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload | |
3054 | the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. | |
3055 | Cleaned up the board header files to make selecting the VSC7385 easier to | |
3056 | control. | |
3057 | ||
3058 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
3059 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
3060 | ||
3061 | commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc | |
3062 | Author: Timur Tabi <timur@freescale.com> | |
3063 | Date: Fri Feb 8 13:15:54 2008 -0600 | |
3064 | ||
3065 | NET: Add Vitesse VSC7385 firmware uploading | |
3066 | ||
3067 | The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX | |
3068 | and other boards. A small firwmare must be uploaded to its on-board memory | |
3069 | before it can be enabled. This patch adds the code which uploads firmware | |
3070 | (but not the firmware itself). | |
3071 | ||
3072 | Previously, this feature was provided by a U-Boot application that was | |
3073 | made available only on Freescale BSPs. The VSC7385 firmware must still | |
3074 | be obtained separately, but at least there is no longer a need for a separate | |
3075 | application. | |
3076 | ||
3077 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
3078 | Acked-by: Ben Warren <biggerbadderben@gmail.com> | |
3079 | ||
3080 | commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855 | |
3081 | Author: Wolfgang Denk <wd@denx.de> | |
3082 | Date: Wed Mar 26 00:52:10 2008 +0100 | |
3083 | ||
3084 | Coding Style cleanyp; update CHANGELOG | |
3085 | ||
3086 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3087 | ||
aa6f6d17 WD |
3088 | commit 43ddd9c820fec44816188f53346b464e20b3142d |
3089 | Author: Jerry Van Baren <gvb.uboot@gmail.com> | |
3090 | Date: Sat Mar 22 14:23:49 2008 -0400 | |
3091 | ||
3092 | Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T | |
3093 | ||
3094 | These defines embedded the u-boot env variables and/or the bd_t structure | |
3095 | in the fdt blob. The conclusion of discussion on the u-boot email list | |
3096 | was that embedding these in the fdt blob is not useful: there are better | |
3097 | ways of passing the data (in fact, the fdt blob itself replaces the | |
3098 | bd_t struct). | |
3099 | ||
3100 | The only board that enables these is the stxxtc and they don't appear | |
3101 | to be used by linux. | |
3102 | ||
3103 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
3104 | Acked-by: Kim Phillips <kim.phillips@freescale.com> | |
3105 | ||
3106 | commit 22ed2285743359fd1fe73e411dff914b2256e68f | |
3107 | Author: Stefan Roese <sr@denx.de> | |
3108 | Date: Mon Mar 17 10:49:25 2008 +0100 | |
3109 | ||
3110 | rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile | |
3111 | ||
3112 | Signed-off-by: Stefan Roese <sr@denx.de> | |
3113 | ||
3114 | commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d | |
3115 | Author: Kyungmin Park <kmpark@infradead.org> | |
3116 | Date: Mon Mar 17 08:54:06 2008 +0900 | |
3117 | ||
3118 | Add Flex-OneNAND booting support | |
3119 | ||
3120 | Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array | |
3121 | using a NOR Flash interface. This on-chip integration enables system designers | |
3122 | to reduce external system logic and use high-density NAND Flash | |
3123 | in applications that would otherwise have to use more NOR components. | |
3124 | ||
3125 | Flex-OneNAND enables users to configure to partition it into SLC and MLC areas | |
3126 | in more flexible way. While MLC area of Flex-OneNAND can be used to store data | |
3127 | that require low reliability and high density, SLC area of Flex-OneNAND | |
3128 | to store data that need high reliability and high performance. Flex-OneNAND | |
3129 | can let users take advantage of storing these two different types of data | |
3130 | into one chip, which is making Flex-OneNAND more cost- and space-effective. | |
3131 | ||
3132 | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> | |
3133 | ||
3134 | commit c512389cc4a10253249271ff6c887c6dab1f0db2 | |
3135 | Author: André Schwarz <andre.schwarz@matrix-vision.de> | |
3136 | Date: Thu Mar 13 13:50:52 2008 +0100 | |
3137 | ||
3138 | MPC5200: support setup without FEC | |
3139 | ||
3140 | Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is | |
3141 | defined. Systems without FEC, i.e. no FEC node in DTB, should be possible. | |
3142 | ||
3143 | Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> | |
3144 | Acked-by: Grant Likely <grant.likely@secretlab.ca> | |
3145 | ||
3146 | commit aa3511e422946041ef626f80a05ae5e8bfc700e6 | |
3147 | Author: Jon Loeliger <jdl@freescale.com> | |
3148 | Date: Wed Mar 5 18:05:46 2008 -0600 | |
3149 | ||
3150 | FSL: Move board/mpc8266ads under board/freescale | |
3151 | ||
3152 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3153 | ||
3154 | commit 7f1d846e5c5754449c286587d099d85246062772 | |
3155 | Author: Jon Loeliger <jdl@freescale.com> | |
3156 | Date: Wed Mar 5 18:05:47 2008 -0600 | |
3157 | ||
3158 | FSL: Move board/mpc7448hpc2 under board/freescale | |
3159 | ||
3160 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3161 | ||
3162 | commit b7e24d283e34727c2a6cdfdac2e09a426c579b73 | |
3163 | Author: Jon Loeliger <jdl@freescale.com> | |
3164 | Date: Wed Mar 5 18:05:45 2008 -0600 | |
3165 | ||
3166 | FSL: Move board/mpc8260ads under board/freescale | |
3167 | ||
3168 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3169 | ||
3170 | commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97 | |
3171 | Author: goda.yusuke <goda.yusuke@renesas.com> | |
3172 | Date: Wed Mar 5 17:08:33 2008 +0900 | |
3173 | ||
3174 | net: Add support AX88796L ethernet device | |
3175 | ||
3176 | AX88796L is device of NE2000 compatible. | |
3177 | This patch support AX88796L ethernet device. | |
3178 | ||
3179 | Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> | |
3180 | Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
3181 | ||
3182 | commit e0a6140dd381e1eed1ada2291166ef2616d8822b | |
3183 | Author: Wolfgang Denk <wd@denx.de> | |
3184 | Date: Tue Mar 25 22:50:41 2008 +0100 | |
3185 | ||
3186 | ne2000 driver: change #ifdef to Makefile conditional compilation | |
3187 | ||
3188 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3189 | ||
3190 | commit e710185aae90c64d39c2d453e40e58ceefe4f250 | |
3191 | Author: goda.yusuke <goda.yusuke@renesas.com> | |
3192 | Date: Wed Mar 5 17:08:20 2008 +0900 | |
3193 | ||
3194 | net: Divided code of NE2000 ethernet driver | |
3195 | ||
3196 | There are more devices of the NE2000 base. | |
3197 | A present code is difficult for us to support more devices. | |
3198 | To support more NE2000 clone devices, separated the function. | |
3199 | ||
3200 | Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> | |
3201 | Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
3202 | ||
3203 | commit 395bce4f59a507a60a475f7ee46bed47de9482df | |
3204 | Author: Mike Frysinger <vapier@gentoo.org> | |
3205 | Date: Sun Feb 24 23:58:13 2008 -0500 | |
3206 | ||
3207 | net/Blackfin: move on-chip MAC driver into drivers/net/ | |
3208 | ||
3209 | The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board | |
3210 | directory, but it is not board specific, so relocate it to the drivers dir | |
3211 | so that other Blackfin ports can utilize it. | |
3212 | ||
3213 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3214 | ||
3215 | commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a | |
3216 | Author: Mike Frysinger <vapier@gentoo.org> | |
3217 | Date: Sun Feb 24 23:52:35 2008 -0500 | |
3218 | ||
3219 | smc91111: use SSYNC() rather than asm(ssync) for Blackfin | |
3220 | ||
3221 | Since the "ssync" instruction may have hardware anomalies associated with | |
3222 | it, have the smc91111 driver use the SSYNC macro rather than invoking it | |
3223 | directly. We workaround all the anomalies via this macro. | |
3224 | ||
3225 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3226 | ||
3227 | commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138 | |
3228 | Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> | |
3229 | Date: Sun Feb 17 22:57:47 2008 +0000 | |
3230 | ||
3231 | 8xx: Update OF support on 8xx | |
3232 | ||
3233 | This patch does some shifting around of OF support on 8xx. | |
3234 | ||
3235 | Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> | |
3236 | ||
3237 | commit 9c666a7db0b2285a270c68810889ce7d5dba304b | |
3238 | Author: Kumar Gala <galak@kernel.crashing.org> | |
3239 | Date: Fri Feb 15 15:16:18 2008 -0600 | |
3240 | ||
3241 | ppc: Allow boards to specify how much memory they can map | |
3242 | ||
3243 | For historical reasons we limited the stack to 256M because some boards | |
3244 | could only map that much via BATS. However newer boards are capable of | |
3245 | mapping more memory (for example 85xx is capble of doing up to 2G). | |
3246 | ||
3247 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
3248 | ||
3249 | commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb | |
3250 | Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> | |
3251 | Date: Fri Feb 15 01:05:58 2008 +0000 | |
3252 | ||
3253 | 8xx : Add OF support to Adder875 board port - resubmit | |
3254 | ||
3255 | Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> | |
3256 | ||
3257 | commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d | |
3258 | Author: Kumar Gala <galak@kernel.crashing.org> | |
3259 | Date: Thu Feb 14 20:44:42 2008 -0600 | |
3260 | ||
3261 | Add setexpr command | |
3262 | ||
3263 | Add a simple expr style command that will set an env variable as the result | |
3264 | of the command. This allows us to do simple math in shell. The following | |
3265 | operations are supported: &, |, ^, +, -, *, /. | |
3266 | ||
3267 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
3268 | ||
3269 | commit 3f105faa64b9826e088711fdfcaa70cb1230397a | |
3270 | Author: Jon Loeliger <jdl@freescale.com> | |
3271 | Date: Wed Mar 5 17:27:48 2008 -0600 | |
3272 | ||
3273 | FSL: Move board/mpc7448hpc2 under board/freescale | |
3274 | ||
3275 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3276 | ||
3277 | commit 449c703374a8868453425e15da7e2f76221b72e4 | |
3278 | Author: Jon Loeliger <jdl@freescale.com> | |
3279 | Date: Wed Mar 5 17:21:43 2008 -0600 | |
3280 | ||
3281 | FSL: Move board/mpc8266ads under board/freescale | |
3282 | ||
3283 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3284 | ||
3285 | commit 5863577989ad689427bb750107e9a75f1c1645d2 | |
3286 | Author: Jon Loeliger <jdl@freescale.com> | |
3287 | Date: Wed Mar 5 16:41:41 2008 -0600 | |
3288 | ||
3289 | FSL: Move board/mpc8260ads under board/freescale | |
3290 | ||
3291 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3292 | ||
3293 | commit 8a773983957ee6c4aa344469b742f29c7d26afbd | |
3294 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3295 | Date: Tue Mar 25 21:30:08 2008 +0900 | |
3296 | ||
3297 | [MIPS] Move gth2_config from ARM section to MIPS | |
3298 | ||
3299 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3300 | ||
3301 | commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15 | |
3302 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3303 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
3304 | ||
3305 | [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB | |
3306 | ||
3307 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3308 | ||
3309 | commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459 | |
3310 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3311 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
3312 | ||
3313 | [MIPS] Fix dcache_status() | |
3314 | ||
3315 | You can't judge UNCACHED by Config.K0 LSB. | |
3316 | ||
3317 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3318 | ||
3319 | commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34 | |
3320 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3321 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
3322 | ||
3323 | [MIPS] Introduce _machine_restart | |
3324 | ||
3325 | Handles machine specific functions by using weak functions. | |
3326 | ||
3327 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3328 | ||
3329 | commit decaba6f5cf386d569ac3997bebb871b966c6b18 | |
3330 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3331 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
3332 | ||
3333 | [MIPS] Cleanup CP0 Status initialization | |
3334 | ||
3335 | Add setup_c0_status from Linux. For the moment we disable interrupts, set | |
3336 | CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for | |
3337 | reset-time configuration and will work well across most processors. | |
3338 | ||
3339 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3340 | ||
3341 | commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23 | |
3342 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3343 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
3344 | ||
3345 | [MIPS] Initialize CP0 Cause before setting up CP0 Status register | |
3346 | ||
3347 | Without this change, we'll be suffering from deffered WATCH exception | |
3348 | once Status.EXL is cleared. Make sure Cause.WP is cleared. | |
3349 | ||
3350 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3351 | ||
3352 | commit 26138623230ca2bad3c78e05a65527ea70c8b688 | |
3353 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3354 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
3355 | ||
3356 | [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init() | |
3357 | ||
3358 | Move things to appropriate place. | |
3359 | ||
3360 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3361 | ||
3362 | commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895 | |
3363 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3364 | Date: Tue Mar 25 21:30:06 2008 +0900 | |
3365 | ||
3366 | [MIPS] Implement flush_cache() | |
3367 | ||
3368 | We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you | |
3369 | don't need to do Hit_Invalidate_I, but flush_cache() needs it since this | |
3370 | function is used not only in U-Boot specfic programs but also at loading | |
3371 | target binaries. | |
3372 | ||
3373 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3374 | ||
3375 | commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d | |
3376 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3377 | Date: Tue Mar 25 21:30:06 2008 +0900 | |
3378 | ||
3379 | [MIPS] Fix I-/D-cache initialization loops | |
3380 | ||
3381 | Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I | |
3382 | again per a loop for I-cache initialization. But according to 'See MIPS | |
3383 | Run', we're encouraged to use three separate loops rather than combining | |
3384 | them *for both I- and D-cache*. This patch tries to fix this. | |
3385 | ||
3386 | In accordance with fixing above, mips_init_[id]cache are separated from | |
3387 | mips_cache_reset(), and rewrite cache loops are completely rewritten with | |
3388 | useful macros. | |
3389 | ||
3390 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3391 | ||
3392 | commit 1898840797c7f50799377bd5b285a8a93a82c419 | |
3393 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3394 | Date: Tue Mar 25 21:30:06 2008 +0900 | |
3395 | ||
3396 | [MIPS] Replace memory clearance code with f_fill64 | |
3397 | ||
3398 | This routine fills memory with zero by 64 bytes, and is 64-bit capable. | |
3399 | ||
3400 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3401 | ||
3402 | commit 2f5d414ccb4024dd0992ff6b22561732dbc73590 | |
3403 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3404 | Date: Tue Mar 25 21:30:06 2008 +0900 | |
3405 | ||
3406 | [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros | |
3407 | ||
3408 | This patch replaces the current function definitions with NESTED, LEAF | |
3409 | and END macro. They specify some more additional information about the | |
3410 | function; an alignment of symbol, type of symbol, stack frame usage, etc. | |
3411 | These information explicitly tells the assembler and the debugger about | |
3412 | the types of code we want to generate. | |
3413 | ||
3414 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3415 | ||
3416 | commit 282223a607c611425fa33f5428f8eae6636972bb | |
3417 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3418 | Date: Tue Mar 25 11:43:17 2008 +0900 | |
3419 | ||
3420 | [MIPS] asm headers' updates | |
3421 | ||
3422 | Make some asm headers adjusted to the latest Linux kernel. | |
3423 | ||
3424 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3425 | ||
3426 | commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd | |
3427 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3428 | Date: Tue Mar 25 11:39:29 2008 +0900 | |
3429 | ||
3430 | [MIPS] Request for the 'mips_cache_lock()' removal | |
3431 | ||
3432 | The initial intension of having mips_cache_lock() was to use the cache | |
3433 | as memory for temporary stack use so that a C environment can be set up | |
3434 | as early as possible. | |
3435 | ||
3436 | But now mips_cache_lock() follow lowlevel_init(). We've already have the | |
3437 | real memory initilaized at this point, therefore we could/should use it. | |
3438 | No reason to lock at all. | |
3439 | ||
3440 | Other problems: | |
3441 | ||
3442 | Cache locking is not consistent across MIPS implementaions. Some imple- | |
3443 | mentations don't support locking at all. The style of locking varies - | |
3444 | some support per line locking, others per way, etc. Some parts use bits | |
3445 | in status registers instead of cache ops. Current mips_cache_lock() is | |
3446 | not necessarily general-purpose. | |
3447 | ||
3448 | And this is worthy of special mention; once U-Boot/MIPS locks the lines, | |
3449 | they are never get unlocked, so the code relies on whatever gets loaded | |
3450 | after U-Boot to re-initialize the cache and clear the locks. We're sup- | |
3451 | posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented, | |
3452 | but leave the situation as it is for a long time. | |
3453 | ||
3454 | For these reasons, I proposed the removal of mips_cache_lock() from the | |
3455 | global start-up code. | |
3456 | ||
3457 | This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that | |
3458 | *things have changed*. If he wants the same behavior as before, he needs | |
3459 | to have CFG_INIT_RAM_LOCK_MIPS in his config file. | |
3460 | ||
3461 | If we don't have any regression report through several releases, then | |
3462 | we'll remove codes entirely. | |
3463 | ||
3464 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3465 | Acked-by: Andrew Dyer <amdyer@gmail.com> | |
3466 | ||
3467 | commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f | |
3468 | Author: Yuri Tikhonov <yur@emcraft.com> | |
3469 | Date: Mon Mar 24 11:30:54 2008 +0100 | |
3470 | ||
3471 | lwmon5 SYSMON POST: fix backlight control | |
3472 | ||
3473 | If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be | |
3474 | run on the board, then the SYSMON POST controls the display backlight | |
3475 | (doesn't switch backlight ON if POST FAILED, and does switch the | |
3476 | backlight ON if PASSED). | |
3477 | ||
3478 | If not, then the video driver controls the display backlight (just | |
3479 | switch ON the backlight upon initialization). | |
3480 | ||
3481 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3482 | ||
3483 | commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8 | |
3484 | Author: Yuri Tikhonov <yur@emcraft.com> | |
3485 | Date: Mon Mar 24 11:29:14 2008 +0100 | |
3486 | ||
3487 | lwmon5 SYSMON POST: fix handling of negative temperatures | |
3488 | ||
3489 | Fix errors in the LWMON5 Sysmon POST for negative temperatures. | |
3490 | ||
3491 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3492 | ||
3493 | commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 | |
3494 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
3495 | Date: Fri Mar 7 16:04:25 2008 +0900 | |
3496 | ||
3497 | pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option | |
3498 | ||
3499 | In current source code, when the device number of PCI is 0, process PCI | |
3500 | bridge without fail. However, when the device number is 0, it is not PCI | |
3501 | always bridge. There are times when device of PCI allocates. | |
3502 | ||
3503 | When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when | |
3504 | use this patch. | |
3505 | ||
3506 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
3507 | Acked-by: Stefan Roese <sr@denx.de> | |
3508 | ||
3509 | commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb | |
3510 | Author: Yuri Tikhonov <yur@emcraft.com> | |
3511 | Date: Fri Mar 21 09:18:40 2008 +0100 | |
3512 | ||
3513 | LWMON5: fix dsPIC POST | |
3514 | ||
3515 | Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST. | |
3516 | ||
3517 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> --- | |
3518 | ||
438a4c11 WD |
3519 | commit 388b82fddc7c05596f3f615f190da0448227dc82 |
3520 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
3521 | Date: Thu Mar 20 23:23:13 2008 +0100 | |
3522 | ||
3523 | [new uImage] Enable new uImage support for the pcs440ep board. | |
3524 | ||
3525 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
3526 | ||
3527 | commit 95f4ec2b9c910c7261e6f060ea530d58b039692d | |
3528 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
3529 | Date: Thu Mar 20 23:23:13 2008 +0100 | |
3530 | ||
3531 | [new uImage] Do not compile new uImage format support by default | |
3532 | ||
3533 | Disable default building of new uImage format support in preparation | |
3534 | for merge with the master. Support for new format can be enabled on | |
3535 | a per-board basis, by defining the following in the board's config file: | |
3536 | ||
3537 | #define CONFIG_FIT 1 | |
3538 | #define CONFIG_OF_LIBFDT 1 | |
3539 | ||
3540 | This can be optionally defined to give more verbose output: | |
3541 | ||
3542 | #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ | |
3543 | ||
3544 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
3545 | ||
3546 | commit dafaede8a46c7159310239e036c93e31c6374487 | |
3547 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
3548 | Date: Thu Mar 20 23:20:31 2008 +0100 | |
3549 | ||
3550 | [new uImage] Disable debuging output in preparation for merge with master | |
3551 | ||
3552 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
3553 | ||
3554 | commit fbe7a155027beacebaee9b32e1ada781fe924bca | |
3555 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
3556 | Date: Thu Mar 20 19:38:45 2008 +0100 | |
3557 | ||
3558 | [new uImage] Compilation and new uImage handling fixes for imxtract | |
3559 | ||
3560 | Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in | |
3561 | include/config_cmd_default.h. Fix few warnings and handling of new format | |
3562 | images. | |
3563 | ||
3564 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
3565 | ||
3566 | commit 36cc8cbb3379d5166f882641123521735c469f92 | |
3567 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
3568 | Date: Thu Mar 20 23:10:19 2008 +0100 | |
3569 | ||
3570 | [new uImage] Fix autoscr command used with new uImage format | |
3571 | ||
3572 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
3573 | ||
3574 | commit 43142e817f0597be412e7cbe19413f5532eafa5d | |
3575 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
3576 | Date: Thu Mar 20 23:10:19 2008 +0100 | |
3577 | ||
3578 | [new uImage] Fix *.its files location in documentation | |
3579 | ||
3580 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
3581 | ||
aa6f6d17 WD |
3582 | commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e |
3583 | Author: Wolfgang Denk <wd@denx.de> | |
3584 | Date: Thu Mar 20 22:01:38 2008 +0100 | |
3585 | ||
3586 | lwmon5 POST: remove unreachable code | |
3587 | ||
3588 | plus some coding style cleanup | |
3589 | ||
3590 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3591 | ||
3592 | commit b73a19e1609d0f705cbab8014ca17aefe89e4c76 | |
3593 | Author: Yuri Tikhonov <yur@emcraft.com> | |
3594 | Date: Thu Mar 20 17:56:04 2008 +0300 | |
3595 | ||
3596 | LWMON5: POST RTC fix | |
3597 | ||
3598 | Modify the RTC API to provide one a status for the time reported by | |
3599 | the rtc_get() function: | |
3600 | 0 - a reliable time is guaranteed, | |
3601 | < 0 - a reliable time isn't guaranteed (power fault, clock issues, | |
3602 | and so on). | |
3603 | ||
3604 | The RTC chip drivers are responsible for providing this info if the | |
3605 | corresponding chip supports such functionality. If not - always | |
3606 | report that the time is reliable. | |
3607 | ||
3608 | The POST RTC test was modified to detect the RTC faults utilizing | |
3609 | this new rtc_get() feature. | |
3610 | ||
3611 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3612 | ||
3613 | commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5 | |
3614 | Author: Martin Krause <martin.krause@tqs.de> | |
3615 | Date: Wed Mar 19 14:25:14 2008 +0100 | |
3616 | ||
3617 | TQM5200B: update MTD partition layout | |
3618 | ||
3619 | - insert partition for dtb blob to TQM5200B MTD layout | |
3620 | - set env variables dependent on the configured board | |
3621 | (TQM5200 or TQM5200B) | |
3622 | ||
3623 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
3624 | ||
3625 | commit f0105727d132f56a21fa3ed8b162309cca6cac44 | |
3626 | Author: Stefan Roese <sr@denx.de> | |
3627 | Date: Wed Mar 19 07:09:26 2008 +0100 | |
3628 | ||
3629 | CFI: Small cleanup for FLASH_SHOW_PROGRESS | |
3630 | ||
3631 | With this patch we don't need that many #ifdef's in the code. It moves | |
3632 | the subtraction into the macro and defines a NOP-macro when | |
3633 | CONFIG_FLASH_SHOW_PROGRESS is not defined. | |
3634 | ||
3635 | Signed-off-by: Stefan Roese <sr@denx.de> | |
3636 | Acked-by: Gerald Van Baren <vanbaren@cideas.com> | |
3637 | ||
3638 | commit 9a042e9ca512beaaa2cb450274313fc477141241 | |
3639 | Author: Jerry Van Baren <gvb.uboot@gmail.com> | |
3640 | Date: Sat Mar 8 13:48:01 2008 -0500 | |
3641 | ||
3642 | Flash programming progress countdown. | |
3643 | ||
3644 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
3645 | ||
438a4c11 WD |
3646 | commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f |
3647 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
3648 | Date: Wed Mar 19 10:00:06 2008 +0100 | |
3649 | ||
3650 | [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org> | |
3651 | ||
3652 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
3653 | ||
aa6f6d17 WD |
3654 | commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1 |
3655 | Author: David Gibson <david@gibson.dropbear.id.au> | |
3656 | Date: Mon Feb 18 18:09:04 2008 +1100 | |
3657 | ||
3658 | libfdt: Remove no longer used code from fdt_node_offset_by_compatible() | |
3659 | ||
3660 | Since fdt_node_offset_by_compatible() was converted to the new | |
3661 | fdt_next_node() iterator, a chunk of initialization code became | |
3662 | redundant, but was not removed by oversight. This patch cleans it up. | |
3663 | ||
3664 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
3665 | ||
3666 | commit d0ccb9b140b472039732de102fc14597eedb14df | |
3667 | Author: David Gibson <david@gibson.dropbear.id.au> | |
3668 | Date: Mon Feb 18 18:06:31 2008 +1100 | |
3669 | ||
3670 | libfdt: Trivial cleanup for CHECK_HEADER) | |
3671 | ||
3672 | Currently the CHECK_HEADER() macro is defined local to fdt_ro.c. | |
3673 | However, there are a handful of functions (fdt_move, rw_check_header, | |
3674 | fdt_open_into) from other files which could also use it (currently | |
3675 | they open-code something more-or-less identical). Therefore, this | |
3676 | patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those | |
3677 | places. | |
3678 | ||
3679 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
3680 | ||
3681 | commit fe30a354cdbb808b5f15366a935b151a4ccee74f | |
3682 | Author: Kumar Gala <galak@kernel.crashing.org> | |
3683 | Date: Wed Feb 20 14:32:36 2008 -0600 | |
3684 | ||
3685 | Fix fdt boardsetup command parsing | |
3686 | ||
3687 | The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'. | |
3688 | ||
3689 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
3690 | ||
3691 | commit 804887e6001e2f00bea11431bf34d6d472512cda | |
3692 | Author: Kumar Gala <galak@kernel.crashing.org> | |
3693 | Date: Fri Feb 15 03:34:36 2008 -0600 | |
3694 | ||
3695 | Add sub-commands to fdt | |
3696 | ||
3697 | fdt header - Display header info | |
3698 | fdt bootcpu <id> - Set boot cpuid | |
3699 | fdt memory <addr> <size> - Add/Update memory node | |
3700 | fdt rsvmem print - Show current mem reserves | |
3701 | fdt rsvmem add <addr> <size> - Add a mem reserve | |
3702 | fdt rsvmem delete <index> - Delete a mem reserves | |
3703 | ||
3704 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
3705 | ||
3706 | commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07 | |
3707 | Author: David Gibson <david@gibson.dropbear.id.au> | |
3708 | Date: Thu Feb 14 16:50:34 2008 +1100 | |
3709 | ||
3710 | libfdt: Fix NOP handling bug in fdt_add_subnode_namelen() | |
3711 | ||
3712 | fdt_add_subnode_namelen() has a bug if asked to add a subnode to a | |
3713 | node which has NOP tags interspersed with its properties. In this | |
3714 | case fdt_add_subnode_namelen() will put the new subnode before the | |
3715 | first NOP tag, even if there are properties after it, which will | |
3716 | result in an invalid blob. | |
3717 | ||
3718 | This patch fixes the bug, and adds a testcase for it. | |
3719 | ||
3720 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
3721 | ||
3722 | commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9 | |
3723 | Author: David Gibson <david@gibson.dropbear.id.au> | |
3724 | Date: Tue Feb 12 11:58:31 2008 +1100 | |
3725 | ||
3726 | libfdt: Add and use a node iteration helper function. | |
3727 | ||
3728 | This patch adds an fdt_next_node() function which can be used to | |
3729 | iterate through nodes of the tree while keeping track of depth. This | |
3730 | function is used to simplify the iteration code in a lot of other | |
3731 | functions, and is also exported for use by library users. | |
3732 | ||
3733 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
3734 | ||
3735 | commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d | |
3736 | Author: David Gibson <david@gibson.dropbear.id.au> | |
3737 | Date: Fri Jan 11 14:55:05 2008 +1100 | |
3738 | ||
3739 | libfdt: Add fdt_set_name() function | |
3740 | ||
3741 | This patch adds an fdt_set_name() function to libfdt, mirroring | |
3742 | fdt_get_name(). This is a r/w function which alters the name of a | |
3743 | given device tree node. | |
3744 | ||
3745 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
3746 | ||
3747 | commit 23e20aa6488e6c0622496549861bfdc74108debe | |
3748 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
3749 | Date: Tue Mar 18 13:33:30 2008 +0100 | |
3750 | ||
3751 | lwmon5: Fix register test logic to match the specific GDC h/w. | |
3752 | ||
3753 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
3754 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3755 | ||
3756 | commit 46bc0a938779aa1d664b847d36b08aa00f22e539 | |
3757 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
3758 | Date: Tue Mar 18 13:27:57 2008 +0100 | |
3759 | ||
3760 | Fix backlight in the lwmon5 POST. | |
3761 | ||
3762 | Backlight was switched on even when temperature was too low. | |
3763 | ||
3764 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
3765 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3766 | ||
3767 | commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf | |
3768 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
3769 | Date: Wed Feb 6 18:48:36 2008 +0100 | |
3770 | ||
3771 | The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5). | |
3772 | ||
3773 | To enable this, alternative, configuration the U-Boot board configuration | |
3774 | file for lwmon5 includes the definitions of alternative addresses for header | |
3775 | (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). | |
3776 | ||
3777 | The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, | |
3778 | and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the | |
3779 | lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). | |
3780 | ||
3781 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3782 | ||
3783 | commit 0f009f781b5b88f25769e154ea4d42db13baf0c6 | |
3784 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
3785 | Date: Mon Feb 4 17:11:53 2008 +0100 | |
3786 | ||
3787 | Add support for the lwmon5 board reset via GPIO58. | |
3788 | ||
3789 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
3790 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3791 | ||
3792 | commit f694e32f93565ec1fa8d0226c584d6b89e931ed9 | |
3793 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
3794 | Date: Mon Feb 4 17:09:55 2008 +0100 | |
3795 | ||
3796 | Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now. | |
3797 | ||
3798 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
3799 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3800 | ||
3801 | commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c | |
3802 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
3803 | Date: Mon Feb 4 14:11:03 2008 +0100 | |
3804 | ||
3805 | The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode. | |
3806 | ||
3807 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
3808 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3809 | ||
3810 | commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184 | |
3811 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
3812 | Date: Mon Feb 4 14:10:42 2008 +0100 | |
3813 | ||
3814 | The patch adds new POST tests for the Lwmon5 board. These are: | |
3815 | ||
3816 | * External Watchdog test; | |
3817 | * dsPIC tests; | |
3818 | * FPGA test; | |
3819 | * GDC test; | |
3820 | * Sysmon tests. | |
3821 | ||
3822 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
3823 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3824 | ||
3825 | commit c2ed33efbfff5767bca236828e021c55fd547b6c | |
3826 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
3827 | Date: Mon Feb 4 14:10:01 2008 +0100 | |
3828 | ||
3829 | Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. | |
3830 | ||
3831 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
3832 | ||
3833 | commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2 | |
3834 | Author: Wolfgang Denk <wd@denx.de> | |
3835 | Date: Tue Mar 18 17:35:51 2008 +0100 | |
3836 | ||
3837 | HMI1001: fix compile problem. | |
3838 | ||
3839 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3840 | ||
3841 | commit 1f2a9970109cebf7446e0503b10b71f8673045ee | |
3842 | Author: Mike Frysinger <vapier@gentoo.org> | |
3843 | Date: Mon Feb 18 05:32:30 2008 -0500 | |
3844 | ||
3845 | Blackfin: BF537-stamp: drop board-specific flash driver for CFI | |
3846 | ||
3847 | The parallel flash on the BF537-STAMP is CFI compliant, so there is no need | |
3848 | for the board specific driver at all. Just use the common CFI driver. | |
3849 | ||
3850 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3851 | ||
3852 | commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c | |
3853 | Author: Mike Frysinger <vapier@gentoo.org> | |
3854 | Date: Tue Feb 19 00:36:14 2008 -0500 | |
3855 | ||
3856 | Blackfin: add proper ELF markings to some assembly functions | |
3857 | ||
3858 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3859 | ||
3860 | commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf | |
3861 | Author: Mike Frysinger <vapier@gentoo.org> | |
3862 | Date: Tue Feb 19 00:35:17 2008 -0500 | |
3863 | ||
3864 | Blackfin: new cplbinfo command for viewing cplb tables | |
3865 | ||
3866 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3867 | ||
3868 | commit aadb72503cd1602349a5fe53356d5f55ecc1b900 | |
3869 | Author: Mike Frysinger <vapier@gentoo.org> | |
3870 | Date: Mon Feb 18 05:37:51 2008 -0500 | |
3871 | ||
3872 | Blackfin: update MAINTAINERS list | |
3873 | ||
3874 | Add maintainer information for the Blackfin boards. | |
3875 | ||
3876 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3877 | ||
3878 | commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d | |
3879 | Author: Mike Frysinger <vapier@gentoo.org> | |
3880 | Date: Mon Feb 18 05:26:48 2008 -0500 | |
3881 | ||
3882 | Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU | |
3883 | ||
3884 | Stop tying things to the processor that should be tied to other defines and | |
3885 | change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build | |
3886 | system to select the -mcpu option. | |
3887 | ||
3888 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3889 | ||
3890 | commit 86a20fb920bd198105acf7b1191117f566d637ed | |
3891 | Author: Mike Frysinger <vapier@gentoo.org> | |
3892 | Date: Sat Feb 16 07:40:36 2008 -0500 | |
3893 | ||
3894 | Blackfin: move bootldr command to common code | |
3895 | ||
3896 | This moves the Blackfin-common bootldr command out of the BF537-STAMP | |
3897 | specific board directory and into the common directory so that all Blackfin | |
3898 | boards may utilize it. | |
3899 | ||
3900 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3901 | ||
3902 | commit decbe029b2a9d3333d02c433389b1c821eea96d7 | |
3903 | Author: Heiko Schocher <hs@denx.de> | |
3904 | Date: Fri Mar 14 11:05:20 2008 +0100 | |
3905 | ||
3906 | mgcoge: update configuration | |
3907 | ||
3908 | Fix configuration for mgcoge board | |
3909 | ||
3910 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
3911 | ||
3912 | commit c136724cda0219c49f1d4b346f00da29b14fdf14 | |
3913 | Author: Wolfgang Denk <wd@denx.de> | |
3914 | Date: Sun Mar 16 01:22:59 2008 +0100 | |
3915 | ||
3916 | drivers/rtc/Makefile: keep list sorted | |
3917 | ||
3918 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3919 | ||
3920 | commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f | |
3921 | Author: Tor Krill <tor@excito.com> | |
3922 | Date: Sat Mar 15 15:40:26 2008 +0100 | |
3923 | ||
3924 | Add support for Intersil isl1208 RTC | |
3925 | ||
3926 | Signed-off-by: Tor Krill <tor@excito.com> | |
3927 | ||
3928 | commit 0210cff3d079d97b2156b13685ee8de368e68a1a | |
3929 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3930 | Date: Sat Mar 15 17:36:41 2008 +0100 | |
3931 | ||
3932 | cramfs: Fix ifdef | |
3933 | ||
3934 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3935 | ||
3936 | commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4 | |
3937 | Author: Wolfgang Denk <wd@denx.de> | |
3938 | Date: Sun Mar 16 01:12:58 2008 +0100 | |
3939 | ||
3940 | Conding style cleanup | |
3941 | ||
3942 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3943 | ||
0b8f2a27 WD |
3944 | commit 41712b4e8c95dff23354bcd620e1f9477160c190 |
3945 | Author: Stefan Roese <sr@denx.de> | |
3946 | Date: Wed Mar 5 12:31:53 2008 +0100 | |
3947 | ||
3948 | ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board | |
3949 | ||
3950 | This patch adds USB OHCI support to the Canyonlands board port. It also | |
3951 | enables EXT2 support. | |
3952 | ||
3953 | Signed-off-by: Stefan Roese <sr@denx.de> | |
3954 | ||
3955 | commit 2596f5b9d353ff3e4387a3325d05740f16958038 | |
3956 | Author: Stefan Roese <sr@denx.de> | |
3957 | Date: Wed Mar 5 12:29:32 2008 +0100 | |
3958 | ||
3959 | usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver | |
3960 | ||
3961 | This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This | |
3962 | way a board just needs to define this new option to enable the "force | |
3963 | NoPowerSwitching mode" instead of adding new CPU/architecture defines | |
3964 | to the USB source itself. | |
3965 | ||
3966 | This new option will be used first with the new AMCC 460EX Canyonlands | |
3967 | board port, which will be posted in a few days. | |
3968 | ||
3969 | This patch also fixes a small compilation problem when DEBUG is enabled. | |
3970 | ||
3971 | Signed-off-by: Stefan Roese <sr@denx.de> | |
3972 | ||
3973 | commit 71665ebf88408ff2acb762af47989fd4365b321a | |
3974 | Author: Stefan Roese <sr@denx.de> | |
3975 | Date: Mon Mar 3 17:27:02 2008 +0100 | |
3976 | ||
3977 | ppc4xx: Add Canyonlands NAND booting support | |
3978 | ||
3979 | 460EX doesn't support a fixed bootstrap option to boot from 512 byte page | |
3980 | NAND devices. The only bootstrap option for NAND booting is option F for | |
3981 | 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap | |
3982 | EEPROM needs to be programmed accordingly. | |
3983 | ||
3984 | This patch adds basic NAND booting support for the AMCC Canyonlands aval | |
3985 | board and also adds support to the "bootstrap" command, to enable NAND | |
3986 | booting I2C setting. | |
3987 | ||
3988 | Tested with 512 byte page NAND device (32MByte) on Canyonlands. | |
3989 | ||
3990 | Signed-off-by: Stefan Roese <sr@denx.de> | |
3991 | ||
3992 | commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2 | |
3993 | Author: Stefan Roese <sr@denx.de> | |
3994 | Date: Tue Mar 11 16:53:00 2008 +0100 | |
3995 | ||
3996 | ppc4xx: Add AMCC Canyonlands support (460EX) (3/3) | |
3997 | ||
3998 | This patch adds support for the AMCC Canyonlands 460EX evaluation | |
3999 | board. | |
4000 | ||
4001 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4002 | ||
4003 | commit 6983fe21f774a924d3adb263a270bc2f301f2aa2 | |
4004 | Author: Stefan Roese <sr@denx.de> | |
4005 | Date: Tue Mar 11 16:52:24 2008 +0100 | |
4006 | ||
4007 | ppc4xx: Add AMCC Canyonlands support (460EX) (2/3) | |
4008 | ||
4009 | This patch adds support for the AMCC Canyonlands 460EX evaluation | |
4010 | board. | |
4011 | ||
4012 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4013 | ||
4014 | commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1 | |
4015 | Author: Stefan Roese <sr@denx.de> | |
4016 | Date: Tue Mar 11 16:51:17 2008 +0100 | |
4017 | ||
4018 | ppc4xx: Add AMCC Canyonlands support (460EX) (1/3) | |
4019 | ||
4020 | This patch adds support for the AMCC Canyonlands 460EX evaluation | |
4021 | board. | |
4022 | ||
4023 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4024 | ||
4025 | commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69 | |
4026 | Author: Stefan Roese <sr@denx.de> | |
4027 | Date: Tue Mar 11 15:11:43 2008 +0100 | |
4028 | ||
4029 | ppc4xx: Add basic support for AMCC 460EX/460GT (5/5) | |
4030 | ||
4031 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
4032 | ||
4033 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4034 | ||
4035 | commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945 | |
4036 | Author: Stefan Roese <sr@denx.de> | |
4037 | Date: Tue Mar 11 15:11:18 2008 +0100 | |
4038 | ||
4039 | ppc4xx: Add basic support for AMCC 460EX/460GT (4/5) | |
4040 | ||
4041 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
4042 | ||
4043 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4044 | ||
4045 | commit 999ecd5aca381984d8ebbeb207ece82a1c275577 | |
4046 | Author: Stefan Roese <sr@denx.de> | |
4047 | Date: Tue Mar 11 15:07:10 2008 +0100 | |
4048 | ||
4049 | ppc4xx: Add basic support for AMCC 460EX/460GT (3/5) | |
4050 | ||
4051 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
4052 | ||
4053 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4054 | ||
4055 | commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a | |
4056 | Author: Stefan Roese <sr@denx.de> | |
4057 | Date: Tue Mar 11 15:05:50 2008 +0100 | |
4058 | ||
4059 | ppc4xx: Add basic support for AMCC 460EX/460GT (2/5) | |
4060 | ||
4061 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
4062 | ||
4063 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4064 | ||
4065 | commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492 | |
4066 | Author: Stefan Roese <sr@denx.de> | |
4067 | Date: Tue Mar 11 15:05:26 2008 +0100 | |
4068 | ||
4069 | ppc4xx: Add basic support for AMCC 460EX/460GT (1/5) | |
4070 | ||
4071 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
4072 | ||
4073 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4074 | ||
4075 | commit 56e410178375d9f20be25fb24e180974f0ae120b | |
4076 | Author: Stefan Roese <sr@denx.de> | |
4077 | Date: Tue Feb 19 22:07:57 2008 +0100 | |
4078 | ||
4079 | ppc4xx: interrupt.c reworked | |
4080 | ||
4081 | This patch is a rework of the 4xx interrupt handling done while | |
4082 | adding the 460EX/GT support. Interrupts are needed on 4xx for the | |
4083 | EMAC driver. | |
4084 | ||
4085 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4086 | ||
4087 | commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46 | |
4088 | Author: Stefan Roese <sr@denx.de> | |
4089 | Date: Tue Feb 19 22:01:57 2008 +0100 | |
4090 | ||
4091 | ppc4xx: program_tlb now uses 64bit physical addess | |
4092 | ||
4093 | This patch changes the physical addess parameter from 32bit to 64bit. | |
4094 | This is needed for 36bit 4xx platforms to access areas located | |
4095 | beyond the 4GB border, like SoC peripherals (EBC etc.). | |
4096 | ||
4097 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4098 | ||
4099 | commit c3307fa186af85771924c434997089b8104c0a46 | |
4100 | Author: Stefan Roese <sr@denx.de> | |
4101 | Date: Tue Feb 19 21:58:25 2008 +0100 | |
4102 | ||
4103 | ppc4xx: miiphy.c reworked | |
4104 | ||
4105 | While adding the 460EX/GT support I reworked the 4xx miiphy code. It | |
4106 | badly neede some cleanup. | |
4107 | ||
4108 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4109 | ||
4110 | commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b | |
4111 | Author: Stefan Roese <sr@denx.de> | |
4112 | Date: Tue Feb 19 16:21:49 2008 +0100 | |
4113 | ||
4114 | rtc: Add M41T62 support | |
4115 | ||
4116 | This patch add support for the STM M41T62 RTC. It is used and tested | |
4117 | on the AMCC Canyonlands 406EX platform. | |
4118 | ||
4119 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4120 | ||
4121 | commit 217d383e201adc7f2271145ae345ea5eae2b7170 | |
4122 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
4123 | Date: Mon Feb 25 18:46:43 2008 +0100 | |
4124 | ||
4125 | ppc4xx: Add 405GPr based MCU25 board specific files | |
4126 | ||
4127 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
4128 | ||
4129 | commit 75a66dcdb383863ad33f0534cfc27b7a86947dad | |
4130 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
4131 | Date: Mon Feb 25 18:46:42 2008 +0100 | |
4132 | ||
4133 | ppc4xx: Add 405GPr based MCU25 board config file | |
4134 | ||
4135 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
4136 | ||
4137 | commit b05f35436b733a240559e77e46bed8439665ecc5 | |
4138 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
4139 | Date: Mon Feb 25 18:46:41 2008 +0100 | |
4140 | ||
4141 | ppc4xx: Add 405GPr based MCU25 board. Global files | |
4142 | ||
4143 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
4144 | ||
4145 | commit 14c27b35ac812a71abce6e3e2f4129d5e9313660 | |
4146 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
4147 | Date: Mon Feb 25 18:37:02 2008 +0100 | |
4148 | ||
4149 | ppc4xx: HCU4/5. remove obsolete hcu_flash.c | |
4150 | ||
4151 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
4152 | ||
4153 | commit a079494853cc2bfeddb26673219db0b4b2b31566 | |
4154 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
4155 | Date: Mon Feb 25 18:37:01 2008 +0100 | |
4156 | ||
4157 | ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY | |
4158 | ||
4159 | Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with | |
4160 | the FLASH_CFI_LEGACY et al. config options. | |
4161 | ||
4162 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
4163 | ||
4164 | commit e4170e5a50c8110f792bc37472833ae669d69951 | |
4165 | Author: Stefan Roese <sr@denx.de> | |
4166 | Date: Tue Mar 11 13:52:25 2008 +0100 | |
4167 | ||
4168 | ppc4xx: Fix comment in 405EX DDR2 init code | |
4169 | ||
4170 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4171 | ||
438a4c11 WD |
4172 | commit 766529fccc860ecb9e955b4239dff69cd9e4ea09 |
4173 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
4174 | Date: Fri Mar 14 16:22:34 2008 +0100 | |
4175 | ||
4176 | Add MD5 support to the new uImage format | |
4177 | ||
4178 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
4179 | ||
4180 | commit 0ede0c383530a418cf98be9122371a86573cd0db | |
4181 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
4182 | Date: Fri Mar 14 16:22:34 2008 +0100 | |
4183 | ||
4184 | Add the MD5 algorithm | |
4185 | ||
4186 | MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then | |
4187 | calculated using the md5() function -- see include/md5.h for details. | |
4188 | ||
4189 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
4190 | ||
0b8f2a27 WD |
4191 | commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0 |
4192 | Author: Wolfgang Denk <wd@denx.de> | |
4193 | Date: Fri Mar 14 16:04:54 2008 +0100 | |
4194 | ||
4195 | tools/setlocalversion: use a git-describe-ish format | |
4196 | ||
4197 | Change the automatic local version to have the form -nnnnn-gSHA1SUMID, | |
4198 | where 'nnnnn' is the number of commits since the last tag (i.e., | |
4199 | 1.3.2-rc3). This makes it much easier to recognize "newer" versions | |
4200 | and to see how much has been changed since the referenced tag. | |
4201 | ||
4202 | Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f. | |
4203 | ||
4204 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4205 | ||
4206 | commit c6dc21c84de0f159a1752c5ebd33cff843f63609 | |
4207 | Author: Wolfgang Denk <wd@denx.de> | |
4208 | Date: Thu Mar 13 14:32:03 2008 +0100 | |
4209 | ||
4210 | HMI1001: add support for MPC5200 Rev. B processors. | |
4211 | ||
4212 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4213 | ||
4214 | commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a | |
4215 | Author: Wolfgang Denk <wd@denx.de> | |
4216 | Date: Thu Mar 13 14:29:49 2008 +0100 | |
4217 | ||
4218 | TQM5200: remove dead code | |
4219 | ||
4220 | This board never used a MGT5100 processor. | |
4221 | ||
4222 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4223 | ||
438a4c11 WD |
4224 | commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d |
4225 | Author: Marian Balakowicz <m8@semihalf.com> | |
4226 | Date: Wed Mar 12 12:14:15 2008 +0100 | |
4227 | ||
4228 | [new uImage] Fix build issue on ARM | |
4229 | ||
4230 | ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead. | |
4231 | ||
4232 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
4233 | ||
4234 | commit 3310c549a73a949430bfda90876df7552a1dab0c | |
4235 | Author: Marian Balakowicz <m8@semihalf.com> | |
4236 | Date: Wed Mar 12 12:13:13 2008 +0100 | |
4237 | ||
4238 | [new uImage] Add new uImage format documentation and examples | |
4239 | ||
4240 | Create doc/uImage.FIT documentation directory with the following files: | |
4241 | - command_syntax_extensions.txt : extended command syntax description | |
4242 | - howto.txt : short usage howto | |
4243 | - source_file_format.txt : internal new uImage format description | |
4244 | ||
4245 | Add example image source files: | |
4246 | - kernel.its | |
4247 | - kernel_fdt.its | |
4248 | - multi.its | |
4249 | ||
4250 | Update README appropriately. | |
4251 | ||
4252 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4253 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
4254 | ||
4255 | commit 1ec73761d2e247078f4520a265d463e8b73391a2 | |
4256 | Author: Marian Balakowicz <m8@semihalf.com> | |
4257 | Date: Wed Mar 12 10:35:52 2008 +0100 | |
4258 | ||
4259 | [new uImage] Fix definition of common bootm_headers_t fields | |
4260 | ||
4261 | verify, autostart and lmb fields are used regardless of CONFIG_FIT | |
4262 | setting, move their definitions to common section. | |
4263 | ||
4264 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4265 | ||
4266 | commit 1d1cb4270edc6a99276834064069717f9782c491 | |
4267 | Author: Marian Balakowicz <m8@semihalf.com> | |
4268 | Date: Wed Mar 12 10:35:51 2008 +0100 | |
4269 | ||
4270 | [new uImage] Fix build problems on trab board | |
4271 | ||
4272 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4273 | ||
4274 | commit f773bea8e11f4a11c388dcee956b2444203e6b65 | |
4275 | Author: Marian Balakowicz <m8@semihalf.com> | |
4276 | Date: Wed Mar 12 10:35:46 2008 +0100 | |
4277 | ||
4278 | [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used | |
4279 | ||
4280 | Save FIT configuration provied in the first bootm argument and use it | |
4281 | when to get ramdisk/FDT subimages when second and third (ramdisk/FDT) | |
4282 | arguments are not specified. | |
4283 | ||
4284 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4285 | ||
4286 | commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae | |
4287 | Author: Marian Balakowicz <m8@semihalf.com> | |
4288 | Date: Wed Mar 12 10:33:01 2008 +0100 | |
4289 | ||
4290 | [new uImage] More verbose kernel image uncompress error message | |
4291 | ||
4292 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4293 | ||
4294 | commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0 | |
4295 | Author: Marian Balakowicz <m8@semihalf.com> | |
4296 | Date: Wed Mar 12 10:33:01 2008 +0100 | |
4297 | ||
4298 | [new uImage] Use show_boot_progress() for new uImage format | |
4299 | ||
4300 | This patch allocates a set of show_boot_progress() IDs for new uImage format | |
4301 | and adds show_boot_progress() calls in new uImage format handling code. | |
4302 | ||
4303 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4304 | ||
4305 | commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720 | |
4306 | Author: Marian Balakowicz <m8@semihalf.com> | |
4307 | Date: Wed Mar 12 10:33:01 2008 +0100 | |
4308 | ||
4309 | [new uImage] Add new uImage fromat support to fpga command | |
4310 | ||
4311 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4312 | ||
4313 | commit 09475f7527460e426c0e0628fc5b8f3754fbaa23 | |
4314 | Author: Marian Balakowicz <m8@semihalf.com> | |
4315 | Date: Wed Mar 12 10:33:01 2008 +0100 | |
4316 | ||
4317 | [new uImage] Add new uImage format handling to other bootm related commands | |
4318 | ||
4319 | Updated commands: | |
4320 | ||
4321 | docboot - cmd_doc.c | |
4322 | fdcboot - cmd_fdc.c | |
4323 | diskboot - cmd_ide.c | |
4324 | nboot - cmd_nand.c | |
4325 | scsiboot - cmd_scsi.c | |
4326 | usbboot - cmd_usb.c | |
4327 | ||
4328 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4329 | ||
4330 | commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338 | |
4331 | Author: Marian Balakowicz <m8@semihalf.com> | |
4332 | Date: Wed Mar 12 10:33:00 2008 +0100 | |
4333 | ||
4334 | [new uImage] Add new uImage format support to imgextract command | |
4335 | ||
4336 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4337 | ||
4338 | commit 424c4abdd175d2c470510df8ce0e32d3f463ec16 | |
4339 | Author: Marian Balakowicz <m8@semihalf.com> | |
4340 | Date: Wed Mar 12 10:33:00 2008 +0100 | |
4341 | ||
4342 | [new uImage] Add new uImage format support to autoscript routine | |
4343 | ||
4344 | autoscript() routine is updated to accept second argument, which | |
4345 | is only used for FIT images and provides a FIT subimage unit name. | |
4346 | ||
4347 | autoscript() routine callers must now pass two arguments. For | |
4348 | non-interactive use (like in cmd_load.c, cmd_net.c), new environment | |
4349 | variable 'autoscript_uname' is introduced and used as a FIT | |
4350 | subimage unit name source. | |
4351 | ||
4352 | autoscript command accepts extended syntax of the addr argument: | |
4353 | addr:<subimg_uname> | |
4354 | ||
4355 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4356 | ||
4357 | commit cd7c596e9f561dbbc17b717277438aee78cde14f | |
4358 | Author: Marian Balakowicz <m8@semihalf.com> | |
4359 | Date: Wed Mar 12 10:33:00 2008 +0100 | |
4360 | ||
4361 | [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines | |
4362 | ||
4363 | This patch updates architecture specific implementations of | |
4364 | do_bootm_linux() adding new uImage format handling for | |
4365 | operations like get kernel entry point address, get kernel | |
4366 | image data start address. | |
4367 | ||
4368 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4369 | ||
4370 | commit 3dfe110149311425919e6d6a14b561b4207498f1 | |
4371 | Author: Marian Balakowicz <m8@semihalf.com> | |
4372 | Date: Wed Mar 12 10:32:59 2008 +0100 | |
4373 | ||
4374 | [new uImage] Add node offsets for FIT images listed in struct bootm_headers | |
4375 | ||
4376 | This patch adds new node offset fields to struct bootm_headers | |
4377 | and updates bootm_headers processing code to make use of them. | |
4378 | Saved node offsets allow to avoid repeating fit_image_get_node() calls. | |
4379 | ||
4380 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4381 | ||
4382 | commit bc8ed486b125452ba3bd8344f052f437329150c5 | |
4383 | Author: Marian Balakowicz <m8@semihalf.com> | |
4384 | Date: Wed Mar 12 10:32:53 2008 +0100 | |
4385 | ||
4386 | [new uImage] ppc: Add new uImage format support to FDT handling routines | |
4387 | ||
4388 | Support for new (FIT) format uImages is added to powerpc specific | |
4389 | boot_get_fdt() routine which now recognizes, sanity checks FIT image | |
4390 | and is able to access data sections of the requested component image. | |
4391 | ||
4392 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4393 | ||
4394 | commit a44a269a905f924b420020506a4d7d7eedcc0eaf | |
4395 | Author: Marian Balakowicz <m8@semihalf.com> | |
4396 | Date: Wed Mar 12 10:14:57 2008 +0100 | |
4397 | ||
4398 | [new uImage] Re-enable interrupts for non automatic booting | |
4399 | ||
4400 | Re-enable interrupts if we return from do_bootm_<os> and 'autostart' | |
4401 | environment variable is not set to 'yes'. | |
4402 | ||
4403 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4404 | ||
4405 | commit d985c8498c4e47095820da97aa722381d39172c5 | |
4406 | Author: Marian Balakowicz <m8@semihalf.com> | |
4407 | Date: Wed Mar 12 10:14:38 2008 +0100 | |
4408 | ||
4409 | [new uImage] Remove unnecessary arguments passed to ramdisk routines | |
4410 | ||
4411 | boot_get_ramdisk() and image_get_ramdisk() do not need all | |
4412 | cmdtp, flag, argc and argv arguments. Simplify routines definition. | |
4413 | ||
4414 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4415 | ||
4416 | commit c87796483bc7c2900470dc747c367f602577608d | |
4417 | Author: Marian Balakowicz <m8@semihalf.com> | |
4418 | Date: Wed Mar 12 10:12:37 2008 +0100 | |
4419 | ||
4420 | [new uImage] Add new uImage format support for ramdisk handling | |
4421 | ||
4422 | This patch updates boot_get_ramdisk() routine adding format | |
4423 | verification and handling for new (FIT) uImages. | |
4424 | ||
4425 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4426 | ||
4427 | commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e | |
4428 | Author: Marian Balakowicz <m8@semihalf.com> | |
4429 | Date: Wed Mar 12 10:01:05 2008 +0100 | |
4430 | ||
4431 | [new uImage] Add new uImage format support for kernel booting | |
4432 | ||
4433 | New format uImages are recognized by the bootm command, | |
4434 | validity of specified kernel component image is checked and | |
4435 | its data section located and used for further processing | |
4436 | (uncompress, load, etc.) | |
4437 | ||
4438 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4439 | ||
4440 | commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547 | |
4441 | Author: Marian Balakowicz <m8@semihalf.com> | |
4442 | Date: Tue Mar 11 12:35:20 2008 +0100 | |
4443 | ||
4444 | [new uImage] Add new uImage format support for imls and iminfo commands | |
4445 | ||
4446 | imls and iminfo can now recognize nad print out contents of the new (FIT) | |
4447 | format uImages. | |
4448 | ||
4449 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4450 | ||
4451 | commit 9d25438fe7d70cf35a8a293ea5e392fefc672613 | |
4452 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
4453 | Date: Tue Mar 11 12:34:47 2008 +0100 | |
4454 | ||
4455 | [new uImage] Add support for new uImage format to mkimage tool | |
4456 | ||
4457 | Support for the new uImage format (FIT) is added to mkimage tool. | |
4458 | Commandline syntax is appropriately extended: | |
4459 | ||
4460 | mkimage [-D dtc_options] -f fit-image.its fit-image | |
4461 | ||
4462 | mkimage (together with dtc) takes fit-image.its and referenced therein | |
4463 | binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the | |
4464 | final image that can be transferred to the target (e.g., via tftp) and then | |
4465 | booted using the bootm command in U-Boot. | |
4466 | ||
4467 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
4468 | ||
4469 | commit eb6175edd6c120d8b89678243e5a2be362ee8e40 | |
4470 | Author: Marian Balakowicz <m8@semihalf.com> | |
4471 | Date: Mon Mar 10 17:53:49 2008 +0100 | |
4472 | ||
4473 | [new uImage] Make node unit names const in struct bootm_headers | |
4474 | ||
4475 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4476 | ||
4477 | commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05 | |
4478 | Author: Marian Balakowicz <m8@semihalf.com> | |
4479 | Date: Fri Feb 29 21:24:06 2008 +0100 | |
4480 | ||
4481 | [new uImage] New uImage low-level API | |
4482 | ||
4483 | Add FDT-based functions for handling new format component images, | |
4484 | configurations, node operations, property get/set, etc. | |
4485 | ||
4486 | fit_ - routines handling global new format uImage operations | |
4487 | like get/set top level property, process all nodes, etc. | |
4488 | fit_image_ - routines handling component images subnodes | |
4489 | fit_conf_ - routines handling configurations node | |
4490 | ||
4491 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
4492 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
4493 | ||
0b8f2a27 WD |
4494 | commit 30f1806f60978d707b0cff2d7bf89d141fc24290 |
4495 | Author: Wolfgang Denk <wd@denx.de> | |
4496 | Date: Sun Mar 9 16:20:02 2008 +0100 | |
4497 | ||
4498 | Release v1.3.2 | |
4499 | ||
4500 | Update CHANGELOG for release. | |
4501 | ||
4502 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4503 | ||
30f1806f WD |
4504 | commit 5b464c289ba715d0979b6e1f94947bb8f1068d16 |
4505 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
4506 | Date: Sun Mar 9 14:52:11 2008 +0100 | |
4507 | ||
4508 | SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings | |
4509 | ||
4510 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
4511 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4512 | ||
4513 | commit db695b78515ddb88a2d4f3357c120345efbf59ec | |
4514 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
4515 | Date: Sun Mar 9 10:44:01 2008 +0100 | |
4516 | ||
4517 | scb9328: Fix flash warning: type qualifiers ignored on function return type | |
4518 | ||
4519 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
4520 | ||
4521 | commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4 | |
4522 | Author: Wolfgang Denk <wd@denx.de> | |
4523 | Date: Sun Mar 9 10:50:41 2008 +0100 | |
4524 | ||
4525 | esd/common/fpga.c: fix indentation. | |
4526 | ||
4527 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4528 | ||
4529 | commit cc3843e36453e2b8db65d7e56de938ba045016a0 | |
4530 | Author: Wolfgang Denk <wd@denx.de> | |
4531 | Date: Sun Mar 9 10:33:31 2008 +0100 | |
4532 | ||
4533 | common/kgdb.c: fix 'dereferencing type-punned pointer' warning | |
4534 | ||
4535 | and get rid of a couple of unneeded casts. | |
4536 | ||
4537 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4538 | ||
4539 | commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8 | |
4540 | Author: Wolfgang Denk <wd@denx.de> | |
4541 | Date: Sun Mar 9 10:09:53 2008 +0100 | |
4542 | ||
4543 | esd/common/fpga.c: fix 'assignment of read-only location' error | |
4544 | ||
4545 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4546 | ||
4547 | commit c6fe4dabac066e8758345d249032768496983a3e | |
4548 | Author: Wolfgang Denk <wd@denx.de> | |
4549 | Date: Sun Mar 9 02:13:19 2008 +0100 | |
4550 | ||
4551 | Makefile: make build silently again. | |
4552 | ||
4553 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4554 | ||
4555 | commit 76babc86576f092573599334c85ec543fdbc6015 | |
4556 | Author: Wolfgang Denk <wd@denx.de> | |
4557 | Date: Sun Mar 9 02:07:49 2008 +0100 | |
4558 | ||
4559 | m501sk: Fix out of tree building | |
4560 | ||
4561 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4562 | ||
4563 | commit 210ed2004e062fdd03f25ab4925998aa1bd08a07 | |
4564 | Author: Wolfgang Denk <wd@denx.de> | |
4565 | Date: Sun Mar 9 00:06:09 2008 +0100 | |
4566 | ||
4567 | ADS5121: fix out of tree build | |
4568 | ||
4569 | and simplify Makefile a bit. | |
4570 | ||
4571 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4572 | ||
4573 | commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93 | |
4574 | Author: Wolfgang Denk <wd@denx.de> | |
4575 | Date: Sat Mar 8 22:35:31 2008 +0100 | |
4576 | ||
4577 | Release v1.3.2 | |
4578 | ||
4579 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4580 | ||
4581 | commit 78a90f827df74520e939c794fc7413dace21c4db | |
4582 | Author: Wolfgang Denk <wd@denx.de> | |
4583 | Date: Sat Mar 8 22:35:04 2008 +0100 | |
4584 | ||
4585 | Update CHANGELOG | |
4586 | ||
4587 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4588 | ||
78a90f82 WD |
4589 | commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f |
4590 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
4591 | Date: Sat Mar 8 21:30:04 2008 +0100 | |
4592 | ||
4593 | esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type | |
4594 | ||
4595 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
4596 | ||
4597 | commit d75469d48c05795144f4b8ba76addbb4920a7bba | |
4598 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
4599 | Date: Sat Mar 8 09:25:49 2008 +0900 | |
4600 | ||
4601 | net: rtl8169: Add processing when OWNbit did't enable in rtl_recv() | |
4602 | ||
4603 | When rtl_recv() of rtl8169 is called, OWNbit of status register | |
4604 | is not enable occasionally. | |
4605 | rtl_recv() doesn't work normally when the driver doesn't do | |
4606 | appropriate processing. | |
4607 | This patch fix this problem. | |
4608 | ||
4609 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
4610 | ||
4611 | commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa | |
4612 | Author: Heiko Schocher <hs@denx.de> | |
4613 | Date: Fri Mar 7 08:15:28 2008 +0100 | |
4614 | ||
4615 | mgsuvd: update board configuration | |
4616 | ||
4617 | initialize the UPIOx controller. | |
4618 | ||
4619 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
4620 | ||
4621 | commit e492c90c26215e459aec0fdf0f8ef1fd204988f5 | |
4622 | Author: Heiko Schocher <hs@denx.de> | |
4623 | Date: Fri Mar 7 08:13:41 2008 +0100 | |
4624 | ||
4625 | mgcoge: update board configuration | |
4626 | ||
4627 | add support for the config Flash. | |
4628 | initialize the UPIOx controller. | |
4629 | ||
4630 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
4631 | ||
4632 | commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258 | |
4633 | Author: Kim Phillips <kim.phillips@freescale.com> | |
4634 | Date: Fri Mar 7 12:27:31 2008 -0600 | |
4635 | ||
4636 | mpc83xx: make dtb basename file references equal those of linux | |
4637 | ||
4638 | the dts file basenames were updated in linux - this helps avoid | |
4639 | inadvertently loading any old dtbs laying around. | |
4640 | ||
4641 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
4642 | ||
4643 | commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675 | |
4644 | Author: Kim Phillips <kim.phillips@freescale.com> | |
4645 | Date: Wed Feb 27 16:08:22 2008 -0600 | |
4646 | ||
4647 | net: uec_phy: actually increment the timeout counter | |
4648 | ||
4649 | allow u-boot to recover (and, e.g., switch to another interface) in the | |
4650 | case where a PHY does not report autonegotiation is complete within its | |
4651 | two second timeout value. | |
4652 | ||
4653 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
4654 | ||
4655 | commit 772003e43957ee0c895abed7cd82cbe72820cbb8 | |
4656 | Author: Markus Brunner <super.firetwister@googlemail.com> | |
4657 | Date: Wed Mar 5 21:38:12 2008 +0100 | |
4658 | ||
4659 | fix taihu soft spi_read | |
4660 | ||
4661 | The taihu board used gpio_read_out_bit which reads the output register and not | |
4662 | the pin state. | |
4663 | ||
4664 | Signed-off-by: Markus Brunner <super.firetwister@gmail.com> | |
4665 | ||
4666 | commit fc84a8495ac750f6b4adae81f8c4f100f65b6340 | |
4667 | Author: Stefan Roese <sr@denx.de> | |
4668 | Date: Fri Mar 7 08:01:43 2008 +0100 | |
4669 | ||
4670 | ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables | |
4671 | ||
4672 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4673 | ||
4674 | commit bd4458cb47abecabd406b1210457be96c69fc49d | |
4675 | Author: Dave Liu <r63238@freescale.com> | |
4676 | Date: Tue Mar 4 16:59:22 2008 +0800 | |
4677 | ||
4678 | 837xEMDS: Improve the system performance | |
4679 | ||
4680 | 1. Make the CSB bus pipeline depth as 4, and enable | |
4681 | the repeat mode; | |
4682 | 2. Raise the eTSEC emergency priority; | |
4683 | 3. Use the highest IP blocks clock. | |
4684 | ||
4685 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
4686 | ||
4687 | commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4 | |
4688 | Author: Detlev Zundel <dzu@denx.de> | |
4689 | Date: Thu Mar 6 16:45:53 2008 +0100 | |
4690 | ||
4691 | Replace "run load; run update" with conditionalized "run load update". | |
4692 | ||
4693 | The latter version stops when "run load" fails for whatever reasons | |
4694 | rendering the combination *a lot* more secure. | |
4695 | ||
4696 | Signed-off-by: Detlev Zundel <dzu@denx.de> | |
4697 | ||
4698 | commit 6bc113886d7d316df1a4e459bec8baf027518551 | |
4699 | Author: Stefan Roese <sr@denx.de> | |
4700 | Date: Tue Mar 4 17:40:41 2008 +0100 | |
4701 | ||
4702 | net: Print error message upon net usage when no ethernet-interface is found | |
4703 | ||
4704 | This patch fixes a problem seen on PPC4xx boards, when no MAC address is | |
4705 | defined. Then no ethernet interface is available but a simple "tftp" | |
4706 | command will return without any error message which is quite confusing. | |
4707 | ||
4708 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4709 | ||
4710 | commit a30a549a3553032d809e0356306b62de0b125901 | |
4711 | Author: Jon Loeliger <jdl@freescale.com> | |
4712 | Date: Tue Mar 4 10:03:03 2008 -0600 | |
4713 | ||
4714 | Remove erroneous or extra spd.h #includers. | |
4715 | ||
4716 | Many of the spd.h #includers don't need it, | |
4717 | and wanted to have spd_sdram() declared instead. | |
4718 | Since they didn't get that, some also had open | |
4719 | coded extern declarations of it instead or as well. | |
4720 | Fix it all up by using spd_sdram.h where needed. | |
4721 | ||
4722 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
4723 | ||
4724 | commit a4475386cef14af3fd88f0518b688e755669486d | |
4725 | Author: Wolfgang Denk <wd@denx.de> | |
4726 | Date: Tue Mar 4 17:41:28 2008 +0100 | |
4727 | ||
4728 | PCS440EP: fix build problems (redundant #define) | |
4729 | ||
4730 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4731 | ||
4732 | commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9 | |
4733 | Author: Stefan Roese <sr@denx.de> | |
4734 | Date: Tue Mar 4 17:39:25 2008 +0100 | |
4735 | ||
4736 | net: Print error message upon net usage when no ethernet-interface is found | |
4737 | ||
4738 | This patch fixes a problem seen on PPC4xx boards, when no MAC address is | |
4739 | defined. Then no ethernet interface is available but a simple "tftp" | |
4740 | command will return without any error message which is quite confusing. | |
4741 | ||
4742 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4743 | ||
4744 | commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53 | |
4745 | Author: Wolfgang Denk <wd@denx.de> | |
4746 | Date: Tue Mar 4 17:38:50 2008 +0100 | |
4747 | ||
4748 | W7OLMC/W7OLMG: fix build problems (redundant #define) | |
4749 | ||
4750 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4751 | ||
4752 | commit f9301e1cda296245ba052d7b08321199c3d0af9d | |
4753 | Author: Wolfgang Denk <wd@denx.de> | |
4754 | Date: Tue Mar 4 14:58:31 2008 +0100 | |
4755 | ||
4756 | Makefile: fix problem with out-of-tree builds introduced by 5013c09f | |
4757 | ||
4758 | Commit 5013c09f (Makefile: cleanup "clean" target) introduced a | |
4759 | problem for out-of-tree builds which caused "make clean" to fail. | |
4760 | ||
4761 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4762 | ||
4763 | commit dfece9500556bed5d8244b1c15d973cec7c25bfe | |
4764 | Author: Wolfgang Denk <wd@denx.de> | |
4765 | Date: Tue Mar 4 11:58:26 2008 +0100 | |
4766 | ||
4767 | examples/Makefile: build "hello_world" on 8xx, too. | |
4768 | ||
4769 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4770 | ||
4771 | commit 74eb0222594fd23aafdf168e60e872814eea8b62 | |
4772 | Author: Mike Nuss <mike@terascala.com> | |
4773 | Date: Mon Mar 3 15:27:05 2008 -0500 | |
4774 | ||
4775 | PPC4xx (Sequoia): Fix Ethernet "remote fault" problems | |
4776 | ||
4777 | Every now and then a Sequoia board (or equivalent hardware) had | |
4778 | problems connecting to a Gigabit capable network interface. | |
4779 | ||
4780 | There were differences in the PHY setup between Linux and U-Boot. | |
4781 | ||
4782 | This patch fixes the problem. Apparently "remote fault" is being set, | |
4783 | which signals to some devices (on the other end of the cable) that a | |
4784 | fault has occurred, while other devices ignore it. I believe the RF bit | |
4785 | was causing the issue, but I removed T4 also, to match up with Linux. | |
4786 | ||
4787 | Signed-off-by: Mike Nuss <mike@terascala.com> | |
4788 | ||
4789 | commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f | |
4790 | Author: Timur Tabi <timur@freescale.com> | |
4791 | Date: Mon Mar 3 09:58:52 2008 -0600 | |
4792 | ||
4793 | fix QE firmware uploading limit | |
4794 | ||
4795 | Fix a typo in qe_upload_firmware() that prevented uploading firmware on | |
4796 | systems with more than one RISC core. | |
4797 | ||
4798 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
4799 | ||
4800 | commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a | |
4801 | Author: Bernhard Nemec <bnemec@ganssloser.com> | |
4802 | Date: Mon Mar 3 11:57:23 2008 +0000 | |
4803 | ||
4804 | Fix endianess problem in cramfs code (cramfs is always host-endian in Linux) | |
4805 | ||
4806 | Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>, | |
4807 | see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846 | |
4808 | ||
4809 | Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com> | |
4810 | ||
4811 | commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8 | |
4812 | Author: Kim B. Heino <Kim.Heino@bluegiga.com> | |
4813 | Date: Mon Mar 3 10:39:13 2008 +0200 | |
4814 | ||
4815 | fix copy from ram to dataflash | |
4816 | ||
4817 | If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash | |
4818 | routines instead of dataflash. This is because it checks "if source | |
4819 | address is not dataflash" instead of target address. | |
4820 | ||
4821 | Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com> | |
4822 | ||
4823 | commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4 | |
4824 | Author: Wolfgang Denk <wd@denx.de> | |
4825 | Date: Mon Mar 3 12:16:44 2008 +0100 | |
4826 | ||
4827 | Fix quoting problem (preboot setting) in many board config files. | |
4828 | ||
4829 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4830 | ||
4831 | commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215 | |
4832 | Author: Wolfgang Denk <wd@denx.de> | |
4833 | Date: Mon Mar 3 12:36:49 2008 +0100 | |
4834 | ||
4835 | ADS5121: Fix default environment. | |
4836 | ||
4837 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4838 | ||
4839 | commit 91c82076ae492bb1f9d9c47a481314631d32dc8e | |
4840 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
4841 | Date: Sun Mar 2 16:12:31 2008 +0100 | |
4842 | ||
4843 | Makefile: Fix missing unconfig and mkconfig use | |
4844 | ||
4845 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
4846 | ||
4847 | commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d | |
4848 | Author: michael <trimarchi@gandalf.sssup.it> | |
4849 | Date: Sun Mar 2 23:33:46 2008 +0100 | |
4850 | ||
4851 | Fix checking fat32 cluster size. | |
4852 | ||
4853 | This fixes the cluster size tests in the FAT32 file system. | |
4854 | The current implementation of VFAT support doesn't work if the | |
4855 | referred cluster has an offset > 16bit representation, causing | |
4856 | "fatload" and "fatls" commands etc. to fail. | |
4857 | ||
4858 | Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it> | |
4859 | ||
4860 | commit 661bad63a076a96c39c64f136915f146725af92b | |
4861 | Author: Wolfgang Denk <wd@denx.de> | |
4862 | Date: Sun Mar 2 22:57:23 2008 +0100 | |
4863 | ||
4864 | Prepare v1.3.2-rc2 release candidate | |
4865 | ||
4866 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4867 | ||
661bad63 WD |
4868 | commit 76957cb3d621bf664311908e5962e151c633c285 |
4869 | Author: Stefan Roese <sr@denx.de> | |
4870 | Date: Sat Mar 1 12:11:40 2008 +0100 | |
4871 | ||
4872 | ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1 | |
4873 | ||
4874 | The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But | |
4875 | currently 4k/2k is configured. This patch fixes this issue. | |
4876 | ||
4877 | Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out. | |
4878 | ||
4879 | Signed-off-by: Stefan Roese <sr@denx.de> | |
4880 | ||
4881 | commit 118978c8eb43803e2794233922df4249fa278b83 | |
4882 | Author: Woodruff, Richard <r-woodruff2@ti.com> | |
4883 | Date: Fri Feb 29 17:34:35 2008 -0600 | |
4884 | ||
4885 | Fix alignment error on ARM for modules | |
4886 | ||
4887 | Fix alignment fault on ARM when running modules. With out an explicit | |
4888 | linker file gcc4.2.1 will half word align __bss_start's value. The word | |
4889 | dereference will crash hello_world. | |
4890 | ||
4891 | signed-off-by Richard Woodruff <r-woodruff2@ti.com> | |
4892 | ||
4893 | commit ce1120dd703e6f12c59e4eba9962356a0300b832 | |
4894 | Author: Dave Liu <r63238@freescale.com> | |
4895 | Date: Fri Feb 29 17:45:31 2008 +0800 | |
4896 | ||
4897 | fs: Fix ext2 read issue | |
4898 | ||
4899 | The ext2 aligned process will corrupt the key | |
4900 | data struct, the patch fix this. | |
4901 | ||
4902 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
4903 | ||
4904 | commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e | |
4905 | Author: Wolfgang Denk <wd@denx.de> | |
4906 | Date: Sun Mar 2 22:45:33 2008 +0100 | |
4907 | ||
4908 | Makefile: cleanup "clean" target | |
4909 | ||
4910 | Make sure CDPATH settings cannot interfere. | |
4911 | Update CHANGELOG. | |
4912 | ||
4913 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
4914 | ||
5013c09f WD |
4915 | commit ffda586fc1373243c9794babde69500f6293a8d8 |
4916 | Author: Li Yang <leoli@freescale.com> | |
4917 | Date: Fri Feb 29 11:46:05 2008 +0800 | |
4918 | ||
4919 | add cscope build target | |
4920 | ||
4921 | Add cscope build target to generate cscope database for code browsing. | |
4922 | ||
4923 | Signed-off-by: Li Yang <leoli@freescale.com> | |
4924 | ||
4925 | commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2 | |
4926 | Author: Kim Phillips <kim.phillips@freescale.com> | |
4927 | Date: Wed Feb 27 15:06:39 2008 -0600 | |
4928 | ||
4929 | net: uec_phy: handle 88e1111 rev.B2 erratum 5.6 | |
4930 | ||
4931 | erratum 5.6 states the autoneg completion bit is functional only if the | |
4932 | autoneg bit is asserted. | |
4933 | ||
4934 | This fixes any secondarily-issued networking commands on non-gigabit | |
4935 | links on the mpc8360 mds board. | |
4936 | ||
4937 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
4938 | ||
4939 | commit 5f91db7f582ca17b1f19f10189c025696f333d2e | |
4940 | Author: John Rigby <jrigby@freescale.com> | |
4941 | Date: Tue Feb 26 09:38:14 2008 -0700 | |
4942 | ||
4943 | MPC5121e ADS PCI support take 3 | |
4944 | ||
4945 | Adds PCI support for MPC5121 | |
4946 | ||
4947 | Tested with drivers/net/rtl8139.c | |
4948 | ||
4949 | Support is conditional since PCI on old silicon does not work. | |
4950 | ||
4951 | ads5121_PCI_config turns on PCI | |
4952 | ||
4953 | In this version, condition compilation of PCI code has been moved | |
4954 | from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as | |
4955 | suggested by Jean-Christophe PLAGNIOL-VILLARD | |
4956 | ||
4957 | Signed-off-by: John Rigby <jrigby@freescale.com> | |
4958 | ||
4959 | commit 44b4dbed4133f657705b7c5193209da9978243a7 | |
4960 | Author: Anatolij Gustschin <agust@denx.de> | |
4961 | Date: Mon Feb 25 23:53:07 2008 +0100 | |
4962 | ||
4963 | Fix warnings while compilation of post/drivers/memory.c | |
4964 | ||
4965 | Fix warnings while compilation with new gcc in eldk-4.2 | |
4966 | ||
4967 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
4968 | ||
4969 | commit 4fae35a53b3e958254d6574a1cc7e10811fc6726 | |
4970 | Author: Anatolij Gustschin <agust@denx.de> | |
4971 | Date: Mon Feb 25 20:54:04 2008 +0100 | |
4972 | ||
4973 | ppc4xx: Fix problem in 4xx_enet.c driver | |
4974 | ||
4975 | U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is | |
4976 | enabled. To reproduce the problem ensure that 'ethrotate' | |
4977 | environment variable isn't set to "no" and then run | |
4978 | "tftp 200000 not_existent_file". | |
4979 | This patch tries to fix the issue. | |
4980 | ||
4981 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
4982 | ||
4983 | commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484 | |
4984 | Author: Anatolij Gustschin <agust@denx.de> | |
4985 | Date: Mon Feb 25 20:04:20 2008 +0100 | |
4986 | ||
4987 | POST: Disable cache while SPR POST | |
4988 | ||
4989 | Currently (since commit b2e2142c) u-boot crashes on | |
4990 | sequoia board while SPR test if CONFIG_4xx_DCACHE is | |
4991 | enabled. This patch disables the cache while SPR test. | |
4992 | ||
4993 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
4994 | ||
4995 | commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d | |
4996 | Author: Martin Krause <martin.krause@tqs.de> | |
4997 | Date: Mon Feb 25 17:52:40 2008 +0100 | |
4998 | ||
4999 | TQM5200: use automatic fdt memory fixup (part 2) | |
5000 | ||
5001 | Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, | |
5002 | TB5200 and TB5200_B to fixup the /memory node with the memory values | |
5003 | detected by U-Boot. | |
5004 | ||
5005 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
5006 | ||
5007 | commit 44ceec253ea941b301abf4b079d52324def69d92 | |
5008 | Author: Martin Krause <martin.krause@tqs.de> | |
5009 | Date: Mon Feb 25 15:17:05 2008 +0100 | |
5010 | ||
5011 | TQM5200: use automatic fdt memory fixup | |
5012 | ||
5013 | Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, | |
5014 | TB5200 and TB5200_B to fixup the /memory node with the memory values | |
5015 | detected by U-Boot. | |
5016 | ||
5017 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
5018 | ||
5019 | commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a | |
5020 | Author: Martin Krause <martin.krause@tqs.de> | |
5021 | Date: Mon Feb 25 13:27:52 2008 +0100 | |
5022 | ||
5023 | TQM5200: fix bug in SDRAM initialization code | |
5024 | ||
5025 | This patch fixes a bug in the SDRAM initialization code for the | |
5026 | TQM5200. The hi_addr bit is now set correctly. Without this patch | |
5027 | the hi_addr bit is always set to 1, if the second SDRAM bank is | |
5028 | not populated. | |
5029 | ||
5030 | For other MPC5200 boards a correspondig patch has already been applied | |
5031 | some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c. | |
5032 | ||
5033 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
5034 | -- | |
5035 | Forget the first patch please. I confused flash with SDRAM in | |
5036 | the comment ... | |
5037 | ||
5038 | commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1 | |
5039 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5040 | Date: Mon Feb 25 00:03:12 2008 +0100 | |
5041 | ||
5042 | mx1fs2/flash: Fix multiple compiler warnings | |
5043 | ||
5044 | "pointer targets in assignment differ in signedness" | |
5045 | ||
5046 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5047 | ||
5048 | commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2 | |
5049 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5050 | Date: Mon Feb 25 00:03:11 2008 +0100 | |
5051 | ||
5052 | arm-imx: Fix register definitions | |
5053 | ||
5054 | Sync register definitions with linux | |
5055 | ||
5056 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5057 | ||
5058 | commit c9bcf75fecc58886af77d2a571cff2eab39eab6f | |
5059 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5060 | Date: Mon Feb 25 00:03:10 2008 +0100 | |
5061 | ||
5062 | actua1/actua2/actua3: Fix multiple unused variable warnings | |
5063 | ||
5064 | - actua1: | |
5065 | actux1.c: In function 'checkboard': | |
5066 | actux1.c:92: warning: unused variable 'revision' | |
5067 | ||
5068 | - actua2: | |
5069 | actux2.c: In function 'checkboard': | |
5070 | actux2.c:100: warning: unused variable 's' | |
5071 | actux2.c:99: warning: unused variable 'revision' | |
5072 | actux2.c: In function 'reset_phy': | |
5073 | actux2.c:130: warning: unused variable 'i' | |
5074 | ||
5075 | - actua3: | |
5076 | actux3.c: In function 'checkboard': | |
5077 | actux3.c:114: warning: unused variable 'revision' | |
5078 | ||
5079 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5080 | ||
5081 | commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd | |
5082 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5083 | Date: Sun Feb 24 11:44:29 2008 +0900 | |
5084 | ||
5085 | Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets. | |
5086 | ||
5087 | The previous patch was lacking of i386, microblaze, nios and nios2. This | |
5088 | patch tries to fix them. | |
5089 | ||
5090 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5091 | ||
438a4c11 WD |
5092 | commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95 |
5093 | Author: Marian Balakowicz <m8@semihalf.com> | |
5094 | Date: Fri Feb 29 22:22:46 2008 +0100 | |
5095 | ||
5096 | [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt() | |
5097 | ||
5098 | Do not use global fdt blob pointer, calculate blob size from routine | |
5099 | argument blob pointer. | |
5100 | ||
5101 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5102 | ||
5103 | commit d1cc52879c8966507dad9fb575481e6d3985e64e | |
5104 | Author: David Gibson <david@gibson.dropbear.id.au> | |
5105 | Date: Tue Feb 12 00:58:31 2008 +1100 | |
5106 | ||
5107 | libfdt: Add and use a node iteration helper function. | |
5108 | ||
5109 | This patch adds an fdt_next_node() function which can be used to | |
5110 | iterate through nodes of the tree while keeping track of depth. This | |
5111 | function is used to simplify the iteration code in a lot of other | |
5112 | functions, and is also exported for use by library users. | |
5113 | ||
5114 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
5115 | ||
5116 | commit 8cf30809a82902a471866d2f07725ce3b8a22291 | |
5117 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
5118 | Date: Fri Feb 29 16:00:24 2008 +0100 | |
5119 | ||
5120 | [new uImage] Add libfdt support to mkimage | |
5121 | ||
5122 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
5123 | ||
5124 | commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9 | |
5125 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
5126 | Date: Fri Feb 29 16:00:23 2008 +0100 | |
5127 | ||
5128 | [new uImage] Add sha1.o object to mkimage binary build | |
5129 | ||
5130 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
5131 | ||
5132 | commit df6f1b895c997978f03afe04502ee76b7ba34ab9 | |
5133 | Author: Marian Balakowicz <m8@semihalf.com> | |
5134 | Date: Fri Feb 29 16:00:06 2008 +0100 | |
5135 | ||
5136 | [new uImage] Fix component handling for legacy multi component images | |
5137 | ||
5138 | Use uint32_t when accessing size table in image_multi_count() and | |
5139 | image_multi_getimg() for multi component images. | |
5140 | ||
5141 | Add missing uimage_to_cpu() endianness conversion. | |
5142 | ||
5143 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5144 | ||
5145 | commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248 | |
5146 | Author: Marian Balakowicz <m8@semihalf.com> | |
5147 | Date: Fri Feb 29 15:59:59 2008 +0100 | |
5148 | ||
5149 | [new uImage] Share common uImage code between mkimage and U-boot | |
5150 | ||
5151 | This patch adds the following common routines: | |
5152 | ||
5153 | 1) Dedicated mkimage print_header() is replaced with common | |
5154 | image_print_contents() | |
5155 | image_print_contents_noindent() | |
5156 | ||
5157 | 2) Common os/arch/type/comp fields name <--> id translation routines | |
5158 | genimg_get_os_name() | |
5159 | genimg_get_arch_name() | |
5160 | genimg_get_type_name() | |
5161 | genimg_get_comp_name() | |
5162 | genimg_get_os_id() | |
5163 | genimg_get_arch_id() | |
5164 | genimg_get_type_id() | |
5165 | genimg_get_comp_id() | |
5166 | ||
5167 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5168 | ||
5169 | commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6 | |
5170 | Author: Marian Balakowicz <m8@semihalf.com> | |
5171 | Date: Fri Feb 29 14:58:34 2008 +0100 | |
5172 | ||
5173 | [new uImage] Update naming convention for bootm/uImage related code | |
5174 | ||
5175 | This patch introduces the following prefix convention for the | |
5176 | image format handling and bootm related code: | |
5177 | ||
5178 | genimg_ - dual format shared code | |
5179 | image_ - legacy uImage format specific code | |
5180 | fit_ - new uImage format specific code | |
5181 | boot_ - booting process related code | |
5182 | ||
5183 | Related routines are renamed and a few pieces of code are moved around and | |
5184 | re-grouped. | |
5185 | ||
5186 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5187 | ||
5188 | commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276 | |
5189 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5190 | Date: Wed Feb 27 21:51:51 2008 -0600 | |
5191 | ||
5192 | [new uImage] Respect autostart setting in linux bootm | |
5193 | ||
5194 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5195 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
5196 | ||
5197 | commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb | |
5198 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5199 | Date: Wed Feb 27 21:51:50 2008 -0600 | |
5200 | ||
5201 | [new uImage] Provide ability to restrict region used for boot images | |
5202 | ||
5203 | Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way | |
5204 | to restrict what memory range is used for bootm. | |
5205 | ||
5206 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5207 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
5208 | ||
5209 | commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da | |
5210 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5211 | Date: Wed Feb 27 21:51:49 2008 -0600 | |
5212 | ||
5213 | [new uImage] Use lmb for bootm allocations | |
5214 | ||
5215 | Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd() | |
5216 | functions over to using lmb for allocation of the ramdisk, command line | |
5217 | and kernel bd info. | |
5218 | ||
5219 | Convert PPC specific fdt_relocate() to use lmb for allocation of the device | |
5220 | tree. | |
5221 | ||
5222 | Provided a weak function that board code can call to do additional | |
5223 | lmb reserves if needed. | |
5224 | ||
5225 | Also introduce the concept of bootmap_base to specify the offset in | |
5226 | physical memory that the bootmap is located at. This is used for | |
5227 | allocations of the cmdline, kernel bd, and device tree as they should | |
5228 | be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ. | |
5229 | ||
5230 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5231 | ||
5232 | commit f5614e7926863bf0225ec860d9b319741a9c4004 | |
5233 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5234 | Date: Wed Feb 27 21:51:48 2008 -0600 | |
5235 | ||
5236 | [new uImage] Add autostart flag to bootm_headers structure | |
5237 | ||
5238 | The autostart env variable was dropped as part of the initial new uImage | |
5239 | cleanup. Add it back here so the arch specific code can decide if it | |
5240 | wants to really boot or not. | |
5241 | ||
5242 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5243 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
5244 | ||
5245 | commit 4ed6552f715983bfc7d212c1199a1f796f1144ad | |
5246 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5247 | Date: Wed Feb 27 21:51:47 2008 -0600 | |
5248 | ||
5249 | [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images | |
5250 | ||
5251 | Introduce the LMB lib used on PPC in the kernel as a clean way to manage | |
5252 | the memory spaces used by various boot images and structures. This code | |
5253 | will allow us to simplify the code in bootm and its support functions. | |
5254 | ||
5255 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5256 | ||
5257 | commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904 | |
5258 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5259 | Date: Tue Feb 19 22:03:47 2008 -0600 | |
5260 | ||
5261 | [new uImage] ppc: Allow boards to specify effective amount of memory | |
5262 | ||
5263 | For historical reasons we limited the stack to 256M because some boards | |
5264 | could only map that much via BATS. However newer boards are capable of | |
5265 | mapping more memory (for example 85xx is capable of doing up to 2G). | |
5266 | ||
5267 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5268 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
5269 | ||
5270 | commit 274cea2bddbca10cdad7daa518951b75c44ef6bc | |
5271 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5272 | Date: Wed Feb 27 21:51:46 2008 -0600 | |
5273 | ||
5274 | [new uImage] rework error handling so common functions don't reset | |
5275 | ||
5276 | Changed image_get_ramdisk() to just return NULL on error and have | |
5277 | get_ramdisk() propogate that error to the caller. It's left to the | |
5278 | caller to call do_reset() if it wants to. | |
5279 | ||
5280 | Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc | |
5281 | to a common location. In the future we will change get_fdt() and | |
5282 | fdt_relocate() to return success/failure and not call do_reset() at all. | |
5283 | ||
5284 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5285 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
5286 | ||
5287 | commit d2bc095a639672def11d5d043b5688d0dbd692ec | |
5288 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5289 | Date: Wed Feb 27 21:51:45 2008 -0600 | |
5290 | ||
5291 | [new uImage] ppc: Re-order ramdisk/fdt handling sequence | |
5292 | ||
5293 | Doing the fdt before the ramdisk allows us to grow the fdt w/o concern | |
5294 | however it does mean we have to go in and fixup the initrd info since | |
5295 | we don't know where it will be. | |
5296 | ||
5297 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5298 | ||
5299 | commit 27953493ef025fb698d68c5dee39b36f01f4d530 | |
5300 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5301 | Date: Wed Feb 27 21:51:44 2008 -0600 | |
5302 | ||
5303 | [new uImage] ppc: Determine if we are booting an OF style | |
5304 | ||
5305 | If we are bootin OF style than we can skip setting up some things | |
5306 | that are used for the old boot method. | |
5307 | ||
5308 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5309 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
5310 | ||
5311 | commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb | |
5312 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5313 | Date: Wed Feb 27 21:51:43 2008 -0600 | |
5314 | ||
5315 | [new uImage] Don't pass kdb to ramdisk_high since we may not have one | |
5316 | ||
5317 | We don't actually need the kdb param as we are just using it to get | |
5318 | bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we | |
5319 | boot via OF we might not actually fill out a kdb. | |
5320 | ||
5321 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5322 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
5323 | ||
5324 | commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775 | |
5013c09f WD |
5325 | Author: Kumar Gala <galak@kernel.crashing.org> |
5326 | Date: Wed Feb 27 16:30:47 2008 -0600 | |
5327 | ||
5328 | 85xx: Don't icbi when unlocking the cache | |
5329 | ||
5330 | There is no reason to icbi when invalidating the temporary stack in | |
5331 | the d-cache. Its impossible on e500 to have the i-cache contain | |
5332 | any addresses in the temp stack and it can be problematic in generating | |
5333 | transactions on the bus to non-valid addresses. | |
5334 | ||
5335 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5336 | ||
5337 | commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6 | |
5338 | Author: Andy Fleming <afleming@freescale.com> | |
5339 | Date: Wed Feb 27 15:50:50 2008 -0600 | |
5340 | ||
5341 | Fix source for ECM error IVPR | |
5342 | ||
5343 | The source vector for the ECM was being set to 2, | |
5344 | but that's what the source vector for DDR was being | |
5345 | set to. Change it to 1. | |
5346 | ||
5347 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
5348 | ||
5349 | commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923 | |
5350 | Author: Andy Fleming <afleming@freescale.com> | |
5351 | Date: Wed Feb 27 14:29:58 2008 -0600 | |
5352 | ||
5353 | Invalidate INIT_RAM TLB mappings | |
5354 | ||
5355 | Commit 0db37dc... (and some others) changed the INIT_RAM TLB | |
5356 | mappings to be unguarded. This collided with an existing "bug" | |
5357 | where the mappings for the INIT_RAM were being kept around. | |
5358 | This meant that speculative loads to those addresses were | |
5359 | succeeding in the TLB, and going out to the bus, where they | |
5360 | were causing an exception (there's nothing at that address). The | |
5361 | Flash code was coincidentally causing such a speculative load. | |
5362 | Rather than go back to mapping the INIT RAM as guarded, we fix | |
5363 | it so that the entries for the INIT_RAM are invalidated. Thus | |
5364 | the speculative loads will fail in the TLB, and have no effect. | |
5365 | ||
5366 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
5367 | ||
5368 | commit 347b7938d3e561eb215aa386c37fb5acb5a383c6 | |
5369 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5370 | Date: Sun Feb 17 22:56:17 2008 +0100 | |
5371 | ||
5372 | sbc8548: Fix Revision reading and unused variable 'path' | |
5373 | ||
5374 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5375 | ||
5376 | commit 495d162374c472f46454453553382ad0735dc725 | |
5377 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5378 | Date: Sun Feb 17 22:56:16 2008 +0100 | |
5379 | ||
5380 | sbc8548: Fix cfi flash bank declaration | |
5381 | ||
5382 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5383 | ||
438a4c11 WD |
5384 | commit 4efbe9dbb129f857f27856936112c8c02f016be6 |
5385 | Author: Marian Balakowicz <m8@semihalf.com> | |
5386 | Date: Wed Feb 27 11:02:26 2008 +0100 | |
5387 | ||
5388 | [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled | |
5389 | ||
5390 | Dual format image code must properly handle all three FDT passing methods: | |
5391 | - raw FDT blob passed | |
5392 | - FDT blob embedded in the legacy uImage | |
5393 | - FDT blob embedded in the new uImage | |
5394 | ||
5395 | This patch enables proper raw FDT handling when no FIT imaeg support | |
5396 | is compiled in. This is a bit tricky as we must dected FIT format even | |
5397 | when FIT uImage handling is not enabled as both FIT uImages and raw FDT | |
5398 | blobs use tha same low level format (libfdt). | |
5399 | ||
5400 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5401 | ||
5402 | commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8 | |
5403 | Author: Marian Balakowicz <m8@semihalf.com> | |
5404 | Date: Wed Feb 27 11:02:26 2008 +0100 | |
5405 | ||
5406 | [new uImage] POWERPC: Add image_get_fdt() routine | |
5407 | ||
5408 | FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage | |
5409 | (3) or embedded in the new uImage. For the (2) case embedding image must be | |
5410 | verified before we get FDT from it. This patch factors out legacy image | |
5411 | specific verification routine to the separate helper routine. | |
5412 | ||
5413 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5414 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
5415 | ||
5416 | commit 1efd43601f90de21ec6c0ebb9880823e822927b1 | |
5417 | Author: Marian Balakowicz <m8@semihalf.com> | |
5418 | Date: Wed Feb 27 11:02:07 2008 +0100 | |
5419 | ||
5420 | [new uImage] Add image_get_kernel() routine | |
5421 | ||
5422 | Legacy image specific verification is factored out to a separate helper | |
5423 | routine to keep get_kernel() generic and simple. | |
5424 | ||
5425 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5426 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
5427 | ||
5428 | commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658 | |
5429 | Author: Marian Balakowicz <m8@semihalf.com> | |
5430 | Date: Wed Feb 27 11:01:04 2008 +0100 | |
5431 | ||
5432 | [new uImage] Move image verify flag to bootm_headers structure | |
5433 | ||
5434 | Do not pass image verification flag directly to related routines. | |
5435 | Simplify argument passing and move it to the bootm_header structure which | |
5436 | contains curently processed image specific data and is already being passed | |
5437 | on the argument list. | |
5438 | ||
5439 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5440 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
5441 | ||
5442 | commit 823afe7cefe00dafefc6696c1cc7aa828c394234 | |
5443 | Author: Marian Balakowicz <m8@semihalf.com> | |
5444 | Date: Wed Feb 27 11:00:47 2008 +0100 | |
5445 | ||
5446 | [Makefile] Sort COBJS in lib_<arch> Makefiles | |
5447 | ||
5448 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5449 | ||
5450 | commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91 | |
5451 | Author: Marian Balakowicz <m8@semihalf.com> | |
5452 | Date: Wed Feb 27 11:00:47 2008 +0100 | |
5453 | ||
5454 | [new uImage] Optimize gen_get_image() flow control | |
5455 | ||
5456 | When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing | |
5457 | to do, update its control flow to better reflect that simple case. | |
5458 | ||
5459 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5460 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
5461 | ||
5462 | commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca | |
5463 | Author: Marian Balakowicz <m8@semihalf.com> | |
5464 | Date: Mon Feb 4 08:28:17 2008 +0100 | |
5465 | ||
5466 | [new uImage] POWERPC: Split get_fdt() into get and relocate routines | |
5467 | ||
5468 | PPC specific FDT blob handling code is divided into two separate routines: | |
5469 | ||
5470 | get_fdt() - find and verify a FDT blob (either raw or image embedded) | |
5471 | fdt_relocate() - move FDT blob to within BOOTMAP if needed | |
5472 | ||
5473 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5474 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
5475 | ||
5013c09f WD |
5476 | commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817 |
5477 | Author: Jon Loeliger <jdl@freescale.com> | |
5478 | Date: Mon Feb 25 13:13:37 2008 -0600 | |
5479 | ||
5480 | 86xx: Fix renamed GUR symbols in sbc8641d board. | |
5481 | ||
5482 | Back in commit a551cee99ad1d1da20fd23ad265de47448852f56 | |
5483 | (86xx: Fix GUR PCI config registers properly), we should have | |
5484 | changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL | |
5485 | symbols in the sbc8641d board as well. Fix this oversight. | |
5486 | ||
5487 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
5488 | ||
5489 | commit 64cd594e623c39f73964d18787763e4533f791f7 | |
5490 | Author: Stefan Roese <sr@denx.de> | |
5491 | Date: Mon Feb 25 16:50:48 2008 +0100 | |
5492 | ||
5493 | ppc4xx: Fix acadia_nand build problem | |
5494 | ||
5495 | Don't include testdram() on NAND-booting target acadia_nand. This saves | |
5496 | a few bytes and makes the target build clean again. | |
5497 | ||
5498 | Signed-off-by: Stefan Roese <sr@denx.de> | |
5499 | ||
5500 | commit 14e099e698d41e8179d05c2b2dbcf704a236f748 | |
5501 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5502 | Date: Sun Feb 24 23:03:12 2008 +0000 | |
5503 | ||
5504 | mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness | |
5505 | ||
5506 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5507 | ||
5508 | commit 724902c8464e610642b3a170278b99710325888e | |
5509 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5510 | Date: Sun Feb 24 23:03:11 2008 +0000 | |
5511 | ||
5512 | arm-imx: Fix registers definition | |
5513 | ||
5514 | Sync registers definition with linux | |
5515 | ||
5516 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5517 | ||
5518 | commit 4cd288b589ea1178947c6e364453c32b3dede6b7 | |
5519 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5520 | Date: Sun Feb 24 23:03:10 2008 +0000 | |
5521 | ||
5522 | actua1/actua2/actua3: Fix multipleunused variable | |
5523 | ||
5524 | - actua1: | |
5525 | actux1.c: In function 'checkboard': | |
5526 | actux1.c:92: warning: unused variable 'revision' | |
5527 | ||
5528 | - actua2: | |
5529 | actux2.c: In function 'checkboard': | |
5530 | actux2.c:100: warning: unused variable 's' | |
5531 | actux2.c:99: warning: unused variable 'revision' | |
5532 | actux2.c: In function 'reset_phy': | |
5533 | actux2.c:130: warning: unused variable 'i' | |
5534 | ||
5535 | - actua3: | |
5536 | actux3.c: In function 'checkboard': | |
5537 | actux3.c:114: warning: unused variable 'revision' | |
5538 | ||
5539 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5540 | ||
438a4c11 WD |
5541 | commit d5934ad7756f038a393a9cfab76a4fe306d9d930 |
5542 | Author: Marian Balakowicz <m8@semihalf.com> | |
5543 | Date: Mon Feb 4 08:28:09 2008 +0100 | |
5544 | ||
5545 | [new uImage] Add dual format uImage support framework | |
5546 | ||
5547 | This patch adds framework for dual format images. Format detection is added | |
5548 | and the bootm controll flow is updated to include cases for new FIT format | |
5549 | uImages. | |
5550 | ||
5551 | When the legacy (image_header based) format is detected appropriate | |
5552 | legacy specific handling is invoked. For the new (FIT based) format uImages | |
5553 | dual boot framework has a minial support, that will only print out a | |
5554 | corresponding debug messages. Implementation of the FIT specific handling will | |
5555 | be added in following patches. | |
5556 | ||
5557 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5558 | ||
5013c09f WD |
5559 | commit b29661fc1151077776454288051bc9a488351ce8 |
5560 | Author: Wolfgang Denk <wd@denx.de> | |
5561 | Date: Sun Feb 24 15:21:36 2008 +0100 | |
5562 | ||
5563 | Coding style cleanup. Prepare v1.3.2-rc2 release candidate | |
5564 | ||
5565 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
5566 | ||
b29661fc WD |
5567 | commit 00b48a48424894daa589d166d73277830b1c6ac4 |
5568 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5569 | Date: Sat Feb 23 12:15:56 2008 +0100 | |
5570 | ||
5571 | ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected | |
5572 | ||
5573 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5574 | ||
5575 | commit b075d74efb70ff68c49a2532f26b56d6703b69c1 | |
5576 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5577 | Date: Sat Feb 23 17:24:16 2008 +0900 | |
5578 | ||
5579 | Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets. | |
5580 | ||
5581 | ---------------------------------------------------------------- | |
5582 | Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)] | |
5583 | ||
5584 | Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on | |
5585 | 32bit targets. | |
5586 | ||
5587 | GCC can be made to warn about usage of long long types with ISO C90 | |
5588 | (-ansi), but only with -pedantic. You can write this in a way that even | |
5589 | then it doesn't cause warnings, namely by: | |
5590 | ||
5591 | #ifdef __GNUC__ | |
5592 | __extension__ typedef __signed__ long long __s64; | |
5593 | __extension__ typedef unsigned long long __u64; | |
5594 | #endif | |
5595 | ||
5596 | The __extension__ keyword in front of this switches off any pedantic | |
5597 | warnings for this expression. | |
5598 | ||
5599 | Signed-off-by: Olaf Hering <olh@suse.de> | |
5600 | Cc: <linux-arch@vger.kernel.org> | |
5601 | Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | |
5602 | Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | |
5603 | ---------------------------------------------------------------- | |
5604 | ||
5605 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5606 | ||
5607 | commit 208acd112e6517b21fc30c420396902b103563ac | |
5608 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5609 | Date: Sat Feb 23 17:07:57 2008 +0900 | |
5610 | ||
5611 | cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate. | |
5612 | ||
5613 | This will reduce the build time. | |
5614 | ||
5615 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5616 | ||
5617 | commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4 | |
5618 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5619 | Date: Sat Feb 23 17:05:00 2008 +0900 | |
5620 | ||
5621 | cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate. | |
5622 | ||
5623 | This will reduce the build time. | |
5624 | ||
5625 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5626 | ||
5627 | commit e682ba399a1d76f09d8cc7af1e57066f1d360d91 | |
5628 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5629 | Date: Sat Feb 23 16:58:41 2008 +0900 | |
5630 | ||
5631 | cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate. | |
5632 | ||
5633 | This reduces the build time by ~10%. Here's the gth2_config example. | |
5634 | ||
5635 | BEFORE AFTER | |
5636 | real 0m31.441s 0m27.833s | |
5637 | user 0m24.766s 0m23.045s | |
5638 | sys 0m10.425s 0m7.468s | |
5639 | ||
5640 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
5641 | ||
5642 | commit 02409f8cf54c7cd91981f0dfec135dbf3858090c | |
5643 | Author: Marcel Moolenaar <marcelm@juniper.net> | |
5644 | Date: Fri Feb 22 10:48:07 2008 -0800 | |
5645 | ||
5646 | make define2mk.sed work on FreeBSD | |
5647 | ||
5648 | In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link", | |
5649 | the define2mk.sed script was identified as the source of the link | |
5650 | failure on FreeBSD. The problem is that sed(1) does not always support | |
5651 | the '+' operator. It isn't on FreeBSD. The attach patch implements the | |
5652 | equivalent, using the '*' operator instead and should work everywhere. | |
5653 | ||
5654 | Signed-off-by: Marcel Moolenaar <marcelm@juniper.net> | |
5655 | ||
5656 | commit e5084af8ded58453cd07ec1af8b0f29f34122bbc | |
5657 | Author: Detlev Zundel <dzu@denx.de> | |
5658 | Date: Fri Feb 22 17:21:32 2008 +0100 | |
5659 | ||
5660 | Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter. | |
5661 | ||
5662 | The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove | |
5663 | final traces of long-deprecated "ramdisk" kernel parm") makes these | |
5664 | changes neccessary. | |
5665 | ||
5666 | Signed-off-by: Detlev Zundel <dzu@denx.de> | |
5667 | ||
5668 | commit d01b847c5cd070895c4ba178c85cd068a95cf7cd | |
5669 | Author: Larry Johnson <lrj@acm.org> | |
5670 | Date: Thu Feb 21 13:58:16 2008 -0500 | |
5671 | ||
5672 | LM75 bug fix for negative temperatures | |
5673 | ||
5674 | When the LM75 temperature sensor measures a temperature below 0 C, the | |
5675 | current driver does not perform sign extension, so the result returned is | |
5676 | 256 C too high. This patch fixes the problem. | |
5677 | ||
5678 | Signed-off-by: Larry Johnson <lrj@acm.org> | |
5679 | ||
5680 | commit 5a910c224b13e413bda41922379add6d75c32da3 | |
5681 | Author: Heiko Schocher <hs@denx.de> | |
5682 | Date: Thu Feb 21 18:33:45 2008 +0100 | |
5683 | ||
5684 | IDS8247: update MAINTAINER entry. | |
5685 | ||
5686 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
5687 | ||
5688 | commit 79eac2bfb591f2b028ec1735049dc91e4320de4a | |
5689 | Author: Heiko Schocher <hs@denx.de> | |
5690 | Date: Thu Feb 21 18:31:15 2008 +0100 | |
5691 | ||
5692 | Fix device tree for mgsuvd board. | |
5693 | ||
5694 | Rename the "scc" node in "ethernet" for the mgsuvd board. | |
5695 | ||
5696 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
5697 | ||
5698 | commit 2e721094a70a52206af2e1bf1208d9a7131f6dad | |
5699 | Author: Yuri Tikhonov <yur@emcraft.com> | |
5700 | Date: Thu Feb 21 14:23:42 2008 +0100 | |
5701 | ||
5702 | lwmon5: enable hardware watchdog | |
5703 | ||
5704 | Some boards (e.g. lwmon5) may use rather small watchdog intervals, so | |
5705 | causing it to reboot the board if U-Boot does a long busy-wait with | |
5706 | udelay(). Thus, for these boards we have to restart WD more | |
5707 | frequently. | |
5708 | ||
5709 | This patch splits the busy-wait udelay() into smaller, predefined, | |
5710 | intervals, so that the watchdog timer may be resetted with the | |
5711 | configurable (CONFIG_WD_PERIOD) interval. | |
5712 | ||
5713 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
5714 | ||
5715 | commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d | |
5716 | Author: Anatolij Gustschin <agust@denx.de> | |
5717 | Date: Thu Feb 21 12:52:29 2008 +0100 | |
5718 | ||
5719 | ppc4xx: Support for ATI Radeon 9200 card on sequoia | |
5720 | ||
5721 | Adds configuration option for ATI Radeon 9200 card | |
5722 | support to sequoia config file. If CONFIG_VIDEO | |
5723 | is enabled, TEXT_BASE should be changed to 0xFFF80000. | |
5724 | ||
5725 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
5726 | ||
5727 | commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7 | |
5728 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5729 | Date: Mon Feb 18 08:18:07 2008 -0600 | |
5730 | ||
5731 | Remove duplicate defines for ARRAY_SIZE | |
5732 | ||
5733 | A few duplicate of the ARRAY_SIZE macro sneaked in since we put | |
5734 | the define in common.h. | |
5735 | ||
5736 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5737 | ||
5738 | commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a | |
5739 | Author: Kumar Gala <galak@kernel.crashing.org> | |
5740 | Date: Mon Feb 18 08:09:37 2008 -0600 | |
5741 | ||
5742 | ppc: Allow boards to specify effective amount of memory | |
5743 | ||
5744 | For historical reasons we limited the stack to 256M because some boards | |
5745 | could only map that much via BATS. However newer boards are capable of | |
5746 | mapping more memory (for example 85xx is capable of doing up to 2G). | |
5747 | ||
5748 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
5749 | ||
5750 | commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b | |
5751 | Author: Mike Frysinger <vapier@gentoo.org> | |
5752 | Date: Mon Feb 18 05:24:13 2008 -0500 | |
5753 | ||
5754 | include autoconf.mk before any other .mk files | |
5755 | ||
5756 | This bumps the autoconf.mk include step above board/cpu/arch/etc... so that | |
5757 | those .mk files can have make if statements based on the current config. | |
5758 | ||
5759 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
5760 | ||
5761 | commit 16fe77752eee099b9fb61ed73460e51cc94b37ba | |
5762 | Author: Mike Frysinger <vapier@gentoo.org> | |
5763 | Date: Mon Feb 18 05:10:07 2008 -0500 | |
5764 | ||
5765 | error check autoconf.mk generation | |
5766 | ||
5767 | If any of the steps for generating autoconf.mk fail currently, they go | |
5768 | unnoticed. To fix, we can simply add 'set -e' to the long list of commands. | |
5769 | This is simpler and more robust than placing '|| exit $$?' after every line. | |
5770 | ||
5771 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
5772 | ||
5773 | commit 019895a8dee71a9f00da05c03e379f45d581b0fe | |
5774 | Author: Stefano Babic <sbabic@denx.de> | |
5775 | Date: Mon Feb 18 08:03:51 2008 +0100 | |
5776 | ||
5777 | Fix bug in dependency checking | |
5778 | ||
5779 | By adding VERSION_FILE to the PHONY targets the script | |
5780 | /tools/setlocalversion is always called and version_autogenerated.h | |
5781 | is replaced only if the script find a modified source file. | |
5782 | ||
5783 | Signed-off-by: Stefano Babic <sbabic@denx.de> | |
5784 | ||
5785 | commit 98ba144ccc912eee90dd42699f023c497ce774c6 | |
5786 | Author: Kyungmin Park <kmpark@infradead.org> | |
5787 | Date: Mon Feb 18 14:35:43 2008 +0900 | |
5788 | ||
5789 | Fix GPMC CS2 memory setup at apollon | |
5790 | ||
5791 | It disables the current map first | |
5792 | ||
5793 | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> | |
5794 | ||
5795 | commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f | |
5796 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5797 | Date: Sun Feb 17 23:52:46 2008 +0100 | |
5798 | ||
5799 | uli526x: Fix multiple differ in signedness and parentheses around comparison | |
5800 | ||
5801 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5802 | ||
5803 | commit beeccf7a5dc5415c202e0132a33c58fc316c2a62 | |
5804 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5805 | Date: Sun Feb 17 16:58:04 2008 +0100 | |
5806 | ||
5807 | MIPS: Fix CFG_NO_FLASH support | |
5808 | ||
5809 | - Fix flash_init call when CFG_NO_FLASH is used | |
5810 | - Remove no more needed flash.c for qemu-mips | |
5811 | ||
5812 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
5813 | ||
5814 | commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47 | |
5815 | Author: Mike Frysinger <vapier@gentoo.org> | |
5816 | Date: Sat Feb 16 02:40:18 2008 -0500 | |
5817 | ||
5818 | easylogo: clean up some more and add -r (rgb) support | |
5819 | ||
5820 | Michael Hennerich added support for outputting an image in RGB format rather | |
5821 | than forcing YUYV all the time. This makes obvious sense if the display you | |
5822 | have takes RGB input rather than YUYV. | |
5823 | ||
5824 | Rather than hack in support for options, I've converted it to use getopt and | |
5825 | cleaned up the argument parsing in the process. | |
5826 | ||
5827 | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> | |
5828 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
5829 | ||
5830 | commit f65c98129ccada3f7caf97d80395a95b84e911de | |
5831 | Author: Mike Frysinger <vapier@gentoo.org> | |
5832 | Date: Sat Feb 16 02:12:37 2008 -0500 | |
5833 | ||
5834 | Makefile: add target for $(LDSCRIPT) | |
5835 | ||
5836 | If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds), | |
5837 | then change into the board directory and try and create it. This allows you | |
5838 | to generate the linker script on the fly based upon board defines (like the | |
5839 | Blackfin boards do). | |
5840 | ||
5841 | There should be no regressions due to this change as the normal case is to | |
5842 | already have a u-boot.lds file. If that's the case, then there's nothing to | |
5843 | generate, and so make will always exit. The fix here is that if the linker | |
5844 | script does not exist, the implicit rules take over and attempt to guess how | |
5845 | to generate the file. | |
5846 | ||
5847 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
5848 | ||
438a4c11 WD |
5849 | commit 5583cbf736474ef754e128a54fb78632f57b48fd |
5850 | Author: Marian Balakowicz <m8@semihalf.com> | |
5851 | Date: Thu Feb 21 17:27:49 2008 +0100 | |
5852 | ||
5853 | [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds | |
5854 | ||
5855 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5856 | ||
5857 | commit 2242f5369822bc7780db95c47985bb408ea9157b | |
5858 | Author: Marian Balakowicz <m8@semihalf.com> | |
5859 | Date: Thu Feb 21 17:27:41 2008 +0100 | |
5860 | ||
5861 | [new uImage] Rename and move print_image_hdr() routine | |
5862 | ||
5863 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5864 | ||
5865 | commit f50433d670ec2ee9e96abac67cdc6e5e061a810d | |
5866 | Author: Marian Balakowicz <m8@semihalf.com> | |
5867 | Date: Thu Feb 21 17:20:20 2008 +0100 | |
5868 | ||
5869 | [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines | |
5870 | ||
5871 | Introducing routines for parsing new uImage format bootm arguments: | |
5872 | [<addr>]#<conf> - configuration specification | |
5873 | [<addr>]:<subimg> - subimage specification | |
5874 | ||
5875 | New format images can contain multiple subimages of the same type. For example | |
5876 | a single new format image file can contain three kernels, two ramdisks and a | |
5877 | couple of FDT blobs. Subimage and configuration specifications are extensions | |
5878 | to bootm (and other image-related commands) arguments' syntax that allow to | |
5879 | specify which particular subimage should be operated on. | |
5880 | ||
5881 | Subimage specification is used to denote a particular subimage. Configurations | |
5882 | are a bit more complex -- they are used to define a particualr booting setup, | |
5883 | for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple, | |
5884 | etc. | |
5885 | ||
5886 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5887 | ||
5888 | commit fff888a1997ff7de9b29e24050fc4a0fd403ba16 | |
5889 | Author: Marian Balakowicz <m8@semihalf.com> | |
5890 | Date: Thu Feb 21 17:20:19 2008 +0100 | |
5891 | ||
5892 | [new uImage] Add gen_get_image() routine | |
5893 | ||
5894 | This routine assures that image (whether legacy or FIT) is not | |
5895 | in a special dataflash storage. | |
5896 | ||
5897 | If image address is a dataflash address image is moved to system RAM. | |
5898 | ||
5899 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5900 | ||
5901 | commit 75d3e8fbd93c14d9929d024c75af2d742c76db70 | |
5902 | Author: Marian Balakowicz <m8@semihalf.com> | |
5903 | Date: Thu Feb 21 17:20:18 2008 +0100 | |
5904 | ||
5905 | [new uImage] Pull in libfdt if CONFIG_FIT is enabled | |
5906 | ||
5907 | New uImage format (Flattened Image Tree) requires libfdt | |
5908 | functionality, print out error message if CONFIG_OF_LIBFDT | |
5909 | is not defined. | |
5910 | ||
5911 | New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT). | |
5912 | This commit turns it on by default. | |
5913 | ||
5914 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
5915 | ||
b29661fc WD |
5916 | commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728 |
5917 | Author: Michael Schwingen <michael@schwingen.org> | |
5918 | Date: Mon Feb 18 23:16:35 2008 +0100 | |
5919 | ||
5920 | CFI: Do not use uninitialized cmd_reset | |
5921 | ||
5922 | Do not use uninitialized cmd_reset; issue both AMD and Intel reset | |
5923 | commands instead | |
5924 | ||
5925 | From a short test, it looks like AMD-style flash roms treat *any* unknown | |
5926 | command write as a reset, at least when in CFI Query mode, so issuing the | |
5927 | Intel reset command to AMD-style flashs seems safe (from the small sample I | |
5928 | have), plus the 3-cycle magic sequence should kick the state machine into | |
5929 | the right state even without a reset command. Since the AMD-style flashs | |
5930 | require the unlock sequence for real operation, I chose to try the AMD reset | |
5931 | command first, so that Intel flashs do no see an invalid command prior to | |
5932 | the CFI query. | |
5933 | ||
5934 | I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix, | |
5935 | plus Intel StrataFlash. | |
5936 | ||
5937 | Signed-off-by: Michael Schwingen <michael@schwingen.org> | |
5938 | Signed-off-by: Stefan Roese <sr@denx.de> | |
5939 | ||
5940 | commit e7a85f26830c9f2e78506421c2d519a2965bc7a1 | |
5941 | Author: Rafal Jaworowski <raj@semihalf.com> | |
5942 | Date: Thu Feb 21 11:56:44 2008 +0100 | |
5943 | ||
5944 | API: Add (c) and licensing notice to the public API header. | |
5945 | ||
5946 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> | |
5947 | ||
5948 | commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6 | |
5949 | Author: Yuri Tikhonov <yur@emcraft.com> | |
5950 | Date: Thu Feb 21 11:06:07 2008 +0100 | |
5951 | ||
5952 | Fix CPU POST test failure | |
5953 | ||
5954 | The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the | |
5955 | ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered | |
5956 | by it. The gcc-4.2 with its more aggressive optimization exposes this fact. | |
5957 | This patch just saves the CR value before running the test code, so allowing | |
5958 | it to do anything it wants with CR. | |
5959 | ||
5960 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
5961 | Acked-by: Yuri Tikhonov <yur@emcraft.com> | |
5962 | -- | |
5963 | ||
5964 | commit d5908b093955415f3d340706378b991f911af671 | |
5965 | Author: Jon Loeliger <jdl@freescale.com> | |
5966 | Date: Wed Feb 20 15:26:51 2008 -0600 | |
5967 | ||
5968 | 8610HPCD: Document the flashbank selection switches. | |
5969 | ||
5970 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
5971 | ||
5972 | commit a551cee99ad1d1da20fd23ad265de47448852f56 | |
5973 | Author: Jon Loeliger <jdl@freescale.com> | |
5974 | Date: Wed Feb 20 14:22:26 2008 -0600 | |
5975 | ||
5976 | 86xx: Fix GUR PCI config registers properly. | |
5977 | ||
5978 | Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where | |
5979 | I tried to "8610HPCD: Fix typos in two PCI setup registers", I | |
5980 | botched it due to not realizing that 8610 and 8641 had different | |
5981 | Global Utility Register defintions, one of which was like 85xx, | |
5982 | and the other wasn't. Correct this problem by introducing two | |
5983 | symbols, one for each 86xx SoC, but neither of which is named | |
5984 | anything like 85xx. | |
5985 | ||
5986 | My bad. Lovely Wednesday with git bisect. You know. | |
5987 | ||
5988 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
5989 | ||
5990 | commit cb06eb961bdffc8728b38c242473d802e83ab2b4 | |
5991 | Author: Jon Loeliger <jdl@freescale.com> | |
5992 | Date: Wed Feb 20 12:24:11 2008 -0600 | |
5993 | ||
5994 | 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default. | |
5995 | ||
5996 | Without an actual supported video card hooked up, enabling | |
5997 | the CONFIG_VIDEO by default just makes it look broken by | |
5998 | routing all console output to the video card. Don't. | |
5999 | ||
6000 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
6001 | ||
6002 | commit 4d264eff4312f230776b913edade7ceb75f1b1e0 | |
6003 | Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> | |
6004 | Date: Wed Jan 30 15:08:15 2008 -0600 | |
6005 | ||
6006 | ColdFire: Fix missing code flash size for M5485EVB | |
6007 | ||
6008 | Signed-off-by: James Mahan <kmahan@freescale.com> | |
6009 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
6010 | ||
6011 | commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d | |
6012 | Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> | |
6013 | Date: Wed Jan 30 15:04:42 2008 -0600 | |
6014 | ||
6015 | ColdFire: Fix 5282 and 5271 interrupt mask bit | |
6016 | ||
6017 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
6018 | ||
6019 | commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 | |
6020 | Author: Jon Loeliger <jdl@freescale.com> | |
6021 | Date: Tue Feb 19 12:31:08 2008 -0600 | |
6022 | ||
6023 | 8610HPCD: Fix typos in two PCI setup registers. | |
6024 | ||
6025 | The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA | |
6026 | were erroneously present as 85xx names and values, leftover from | |
6027 | the clone wars. Fix this by removing the 85xx cruft from the | |
6028 | 86xx codebase. | |
6029 | ||
6030 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
6031 | ||
6032 | commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170 | |
6033 | Author: Jon Loeliger <jdl@freescale.com> | |
6034 | Date: Mon Feb 18 14:01:56 2008 -0600 | |
6035 | ||
6036 | 86xx: Convert sbc8641d to use libfdt. | |
6037 | ||
6038 | This is the proper fix for a missing closing brace in the function | |
6039 | ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com. | |
6040 | The ft_cpu_setup() function in mpc8641hpcn.c should have been | |
6041 | removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE, | |
6042 | but was missed. Only, the sbc8641d was nominally still using it. | |
6043 | It all got ripped out, and the funcality that was in ft_board_setup() | |
6044 | was refactored to remove the CPU portions into the new file | |
6045 | cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now. | |
6046 | ||
6047 | Based loosely on an original patch from joe.hamman@embeddedspecialties.com | |
6048 | ||
6049 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
6050 | ||
6051 | commit 04efddc87c50c84f85dad5c331c634a6ce830a83 | |
6052 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6053 | Date: Sun Feb 17 23:35:31 2008 +0100 | |
6054 | ||
6055 | mpc86xx: Fix unused variable 'config' and 'immap' | |
6056 | ||
6057 | and remove useless CONFIG_DDR_INTERLEAVE | |
6058 | ||
6059 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6060 | ||
6061 | commit 83d1b3876695c4f21faff2b731d9ef83f38ed208 | |
6062 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6063 | Date: Sun Feb 17 23:03:36 2008 +0100 | |
6064 | ||
6065 | mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law' | |
6066 | ||
6067 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6068 | ||
6069 | commit b6f29c84c208a091f95a10cbc9852d729659ba20 | |
6070 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6071 | Date: Sun Feb 17 14:15:31 2008 +0100 | |
6072 | ||
6073 | s3c24x0: Fix unused variable 'i' in function 'serial_init_dev' | |
6074 | ||
6075 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6076 | ||
6077 | commit 0937b8d869fdb42d6ad4fe312958639bd62c973f | |
6078 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6079 | Date: Sun Feb 17 14:15:32 2008 +0100 | |
6080 | ||
6081 | pxa: fix assignment from incompatible pointer type | |
6082 | ||
6083 | fix mmc_bread function prototype | |
6084 | ||
6085 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6086 | ||
6087 | commit 64d792063fff90b8118179b092feee09fe5cae13 | |
6088 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6089 | Date: Sun Feb 17 14:15:30 2008 +0100 | |
6090 | ||
6091 | at91cap9adk: fix implicit declaration of function 'eth_init' | |
6092 | ||
6093 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6094 | ||
6095 | commit 375c4353db8f900f7ec772e26fab116ec00f7d3a | |
6096 | Author: Wolfgang Denk <wd@denx.de> | |
6097 | Date: Sun Feb 17 15:43:44 2008 +0100 | |
6098 | ||
6099 | Remove files added by mistake, update CHANGELOG. | |
6100 | ||
6101 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
6102 | ||
375c4353 WD |
6103 | commit b738654d3c84a30f2bfd9a8d7652ff20807c890c |
6104 | Author: Mike Nuss <mike@terascala.com> | |
6105 | Date: Wed Feb 6 11:10:11 2008 -0500 | |
6106 | ||
6107 | PPC440EPx: Optionally enable second I2C bus | |
6108 | ||
6109 | The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the | |
6110 | PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board | |
6111 | code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected. | |
6112 | ||
6113 | Signed-off-by: Mike Nuss <mike@terascala.com> | |
6114 | Cc: Stefan Roese <sr@denx.de> | |
6115 | ||
6116 | commit ef5b4f221c22d05770878513951745f236b5b43f | |
6117 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
6118 | Date: Tue Feb 5 10:26:44 2008 +0100 | |
6119 | ||
6120 | ppc4xx: HCU4/5. Cleanup configs | |
6121 | ||
6122 | - hcu4.h: Removed define of CONFIG_PPC405GPr | |
6123 | - Corrected phy addresses | |
6124 | - Fix boot variables | |
6125 | - Respect line length of 80 chars | |
6126 | ||
6127 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
6128 | ||
6129 | commit 74973126d1be63ac75bdc192f46234dca3a7c421 | |
6130 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
6131 | Date: Tue Feb 5 11:31:28 2008 +0100 | |
6132 | ||
6133 | ppc4xx: HCU4/5. Cleanups | |
6134 | ||
6135 | - Fix some coding style violations. | |
6136 | - Use in/out_u16/32 where appropriate. | |
6137 | - Use register names from ppc405.h. | |
6138 | - Fix trace useage for Lauterbach. | |
6139 | - Remove obsolete generation HCU2. | |
6140 | - Renamed fixed_hcu4_sdram to init_ppc405_sdram. | |
6141 | ||
6142 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
6143 | ||
6144 | commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555 | |
6145 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
6146 | Date: Tue Feb 5 10:26:41 2008 +0100 | |
6147 | ||
6148 | ppc4xx: PPC405GPr fix missing register definitions | |
6149 | ||
6150 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
6151 | ||
6152 | commit 214398d9cb22268d9d4f7563359edca0f78297a2 | |
6153 | Author: Larry Johnson <lrj@acm.org> | |
6154 | Date: Fri Jan 18 21:49:05 2008 -0500 | |
6155 | ||
6156 | ppc4xx: Beautify configuration files for Sequoia and Korat boards | |
6157 | ||
6158 | Signed-off-by: Larry Johnson <lrj@acm.org> | |
6159 | ||
6160 | commit 30c6a241e88499f536e86d325759e29ba00ff67f | |
6161 | Author: Anatolij Gustschin <agust@denx.de> | |
6162 | Date: Fri Feb 15 20:09:01 2008 +0100 | |
6163 | ||
6164 | Wipe out assembler warnings while compiling x86 biosemu | |
6165 | ||
6166 | This patch tries to get rid of some assembler warnings about | |
6167 | changed .got2 section type while compiling x86 bios emulator | |
6168 | code. | |
6169 | ||
6170 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
6171 | ||
6172 | commit 67a4389e39ad853d65b72e2b7cad15c7e8291147 | |
6173 | Author: Wolfgang Denk <wd@denx.de> | |
6174 | Date: Fri Feb 15 00:57:09 2008 +0100 | |
6175 | ||
6176 | Prepare v1.3.2-rc1 release candidate | |
6177 | ||
67a4389e WD |
6178 | commit f33e9653c9c09868995d788511d573771c209fe5 |
6179 | Author: Anatolij Gustschin <agust@denx.de> | |
6180 | Date: Fri Feb 15 00:13:20 2008 +0100 | |
6181 | ||
6182 | Fix compile warning on lib_ppc/board.c | |
6183 | ||
6184 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
6185 | ||
6186 | commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4 | |
6187 | Author: Anatolij Gustschin <agust@denx.de> | |
6188 | Date: Thu Feb 14 18:22:04 2008 +0100 | |
6189 | ||
6190 | Add Radeon Mobility 9200 pci device id to the radeon driver | |
6191 | ||
6192 | This patch extends PCI device id table of the | |
6193 | radeon driver so that the driver will also support | |
6194 | Radeon Mobility 9200 (M9+) based boards. | |
6195 | ||
6196 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
6197 | ||
6198 | commit 1b8607e1f7143548c6062c28371449ec69588c00 | |
6199 | Author: Anatolij Gustschin <agust@denx.de> | |
6200 | Date: Thu Feb 14 18:19:50 2008 +0100 | |
6201 | ||
6202 | Extend ATI Radeon driver to support more video modes | |
6203 | ||
6204 | Adds ATI Radeon 9200 support for 1280x1024, 1024x768, | |
6205 | 800x600, 640x480 at 24, 16 and 8 bpp. | |
6206 | ||
6207 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
6208 | ||
6209 | commit 4124382de029d361162a4b8cecc773eb8f26e2a8 | |
6210 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6211 | Date: Sun Feb 10 17:05:20 2008 +0100 | |
6212 | ||
6213 | xsengine: fix typo and few coding style | |
6214 | ||
6215 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6216 | ||
6217 | commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e | |
6218 | Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
6219 | Date: Fri Feb 8 21:25:58 2008 +0100 | |
6220 | ||
6221 | Fix wrong memory limit calculation in memory-test | |
6222 | ||
6223 | If the length of the memory address range passed to the "mtest" command is | |
6224 | not of the form 2^x - 1, not all address lines are tested. This bug is | |
6225 | inherited from the original software at | |
6226 | http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix | |
6227 | this. | |
6228 | ||
6229 | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
6230 | ||
6231 | commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db | |
6232 | Author: Wolfgang Denk <wd@denx.de> | |
6233 | Date: Fri Feb 15 00:11:39 2008 +0100 | |
6234 | ||
6235 | Coding STyle cleanup. | |
6236 | ||
6237 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
6238 | ||
6239 | commit f6921e3dc331293c873ec4d109fd5517a42a90b3 | |
6240 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
6241 | Date: Tue Feb 5 13:30:43 2008 +0900 | |
6242 | ||
6243 | sh: Fix register address of SH7722 | |
6244 | ||
6245 | The address of SH7722 is wrong by old document. | |
6246 | This patch fixes this problem. | |
6247 | ||
6248 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
6249 | ||
6250 | commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2 | |
6251 | Author: Mike Frysinger <vapier@gentoo.org> | |
6252 | Date: Mon Feb 4 17:44:23 2008 -0500 | |
6253 | ||
6254 | only update version header as needed | |
6255 | ||
6256 | Constantly rebuilding the version header will force useless relinking, so we | |
6257 | simply need to compare the new header with the existing one before updating | |
6258 | it. | |
6259 | ||
6260 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
6261 | ||
6262 | commit 208447f8e953f347425eb92c8e28d59e6d911363 | |
6263 | Author: Mike Frysinger <vapier@gentoo.org> | |
6264 | Date: Mon Jan 28 05:56:19 2008 -0500 | |
6265 | ||
6266 | Do not specify a CROSS_COMPILE default when executing size | |
6267 | ||
6268 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
6269 | ||
6270 | commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e | |
6271 | Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
6272 | Date: Wed Feb 13 11:19:19 2008 +0100 | |
6273 | ||
6274 | Fix return value of mtest when CFG_ALT_MEMTEST set | |
6275 | ||
6276 | Fix a missing return statement from a non-void function. | |
6277 | ||
6278 | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
6279 | ||
6280 | commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602 | |
6281 | Author: Timur Tabi <timur@freescale.com> | |
6282 | Date: Wed Jan 9 14:35:26 2008 -0600 | |
6283 | ||
6284 | 85xx, 86xx: Determine I2C clock frequencies and store in global_data | |
6285 | ||
6286 | Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. | |
6287 | ||
6288 | Update the get_clocks() function in 85xx and 86xx to determine the I2C | |
6289 | clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. | |
6290 | ||
6291 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
6292 | ||
6293 | commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08 | |
6294 | Author: Wolfgang Denk <wd@denx.de> | |
6295 | Date: Thu Feb 14 23:18:01 2008 +0100 | |
6296 | ||
6297 | TQM834x: clean up configuration | |
6298 | ||
6299 | Get board name consistent with Linux and elsewhere; | |
6300 | get rid of local network definitions etc. | |
6301 | ||
6302 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
6303 | ||
6304 | commit 38cc09c55b1d7f233789052c6fc462e5377669a9 | |
6305 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6306 | Date: Thu Feb 14 08:02:12 2008 +0100 | |
6307 | ||
6308 | TFTP: fix search of ':' in BootFile | |
6309 | ||
6310 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
6311 | ||
6312 | commit 0bc9efada170096c6b273f19165e32936d330d80 | |
6313 | Author: Wolfgang Denk <wd@denx.de> | |
6314 | Date: Thu Feb 14 22:46:55 2008 +0100 | |
6315 | ||
6316 | Coding style cleanup; update CHANGELOG. | |
6317 | ||
6318 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
6319 | ||
0bc9efad WD |
6320 | commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b |
6321 | Author: Wolfgang Denk <wd@denx.de> | |
6322 | Date: Thu Feb 14 22:43:22 2008 +0100 | |
6323 | ||
6324 | PPC: Use r2 instead of r29 as global data pointer | |
6325 | ||
6326 | R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc | |
6327 | will refuse to use load/store multiple insns; instead, it issues a | |
6328 | list of simple load/store instructions upon function entry and exit, | |
6329 | resulting in bigger code size, which in turn makes the build for a | |
6330 | few boards fail. | |
6331 | ||
6332 | Use r2 instead. | |
6333 | ||
6334 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
6335 | ||
6336 | commit 3c234efa693bc59906c2be55c7918ecbb55392ea | |
6337 | Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> | |
6338 | Date: Wed Jan 30 09:08:49 2008 +0100 | |
6339 | ||
6340 | ARM: make the machid configurable via the environment | |
6341 | ||
6342 | If the variable "machid" exists, let do_bootm_linux use that instead | |
6343 | of bd->bi_arch_number. | |
6344 | ||
6345 |