]>
Commit | Line | Data |
---|---|---|
d049cc7f WD |
1 | commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4 |
2 | Author: Dave Liu <r63238@freescale.com> | |
3 | Date: Wed Mar 26 22:55:32 2008 +0800 | |
4 | ||
5 | drivers: add the support for Freescale SATA controller | |
6 | ||
7 | Add the Freescale on-chip SATA controller driver to u-boot, | |
8 | The SATA controller is used on the 837x and 8315 targets, | |
9 | The driver can be used to load kernel, fs and dtb. | |
10 | ||
11 | The features list: | |
12 | - 1.5/3 Gbps link speed | |
13 | - LBA48, LBA28 support | |
14 | - DMA and FPDMA support | |
15 | - Two ports support | |
16 | ||
17 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
18 | ||
19 | commit bede87f4c87c3ccd868cc60ebf792e0560c6d024 | |
20 | Author: Dave Liu <r63238@freescale.com> | |
21 | Date: Wed Mar 26 22:54:44 2008 +0800 | |
22 | ||
23 | ata: add the readme for SATA command line | |
24 | ||
25 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
26 | ||
27 | commit cd54081cd479e542fc399b8a40651ff11a1ad849 | |
28 | Author: Dave Liu <r63238@freescale.com> | |
29 | Date: Wed Mar 26 22:53:24 2008 +0800 | |
30 | ||
31 | ata: enable the sata initialize on boot up | |
32 | ||
33 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
34 | ||
35 | commit 69386383c5c2b323c66495b0b0cef6a9714d83bf | |
36 | Author: Dave Liu <r63238@freescale.com> | |
37 | Date: Wed Mar 26 22:52:36 2008 +0800 | |
38 | ||
39 | ata: add the fis struct for SATA | |
40 | ||
41 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
42 | ||
43 | commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc | |
44 | Author: Dave Liu <r63238@freescale.com> | |
45 | Date: Wed Mar 26 22:51:44 2008 +0800 | |
46 | ||
47 | ata: add the libata support | |
48 | ||
49 | add simple libata support in u-boot | |
50 | ||
51 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
52 | ||
53 | commit 8e9bb43429e50df55fa41932cbe65841ff579220 | |
54 | Author: Dave Liu <r63238@freescale.com> | |
55 | Date: Wed Mar 26 22:50:45 2008 +0800 | |
56 | ||
57 | ata: make the ata_piix driver using new SATA framework | |
58 | ||
59 | original ata_piix driver is using IDE framework, not real | |
60 | SATA framework. For now, the ata_piix driver is only used | |
61 | by x86 sc520_cdp board. This patch makes the ata_piix driver | |
62 | use the new SATA framework, so | |
63 | ||
64 | - remove the duplicated command stuff | |
65 | - remove the CONFIG_CMD_IDE define in the sc520_cdp.h | |
66 | - add the CONFIG_CMD_SATA define to sc520_cdp.h | |
67 | ||
68 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
69 | ||
70 | commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe | |
71 | Author: Dave Liu <r63238@freescale.com> | |
72 | Date: Wed Mar 26 22:49:44 2008 +0800 | |
73 | ||
74 | ata: add the support for SATA framework | |
75 | ||
76 | - add the SATA framework | |
77 | - add the SATA command line | |
78 | ||
79 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
80 | ||
81 | commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c | |
82 | Author: Dave Liu <r63238@freescale.com> | |
83 | Date: Wed Mar 26 22:48:18 2008 +0800 | |
84 | ||
85 | ata: merge the header of ata_piix driver | |
86 | ||
87 | move the sata.h from include/ to drivers/block/ata_piix.h | |
88 | ||
89 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
90 | ||
91 | commit 9eef62804d9695425b24c87b46a61a7fa74afee0 | |
92 | Author: Dave Liu <r63238@freescale.com> | |
93 | Date: Wed Mar 26 22:47:06 2008 +0800 | |
94 | ||
95 | ata: merge the ata_piix driver | |
96 | ||
97 | move the cmd_sata.c from common/ to drivers/ata_piix.c, | |
98 | the cmd_sata.c have some part of ata_piix controller drivers. | |
99 | consolidate the driver to have better framework. | |
100 | ||
101 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
102 | ||
103 | commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e | |
104 | Author: Wolfgang Denk <wd@denx.de> | |
105 | Date: Wed Mar 26 15:38:47 2008 +0100 | |
106 | ||
107 | Coding style cleanup. | |
108 | ||
109 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
110 | ||
111 | commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660 | |
112 | Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
113 | Date: Wed Mar 26 13:02:13 2008 +0100 | |
114 | ||
115 | Add CFG_RTC_DS1337_NOOSC to turn off OSC output | |
116 | ||
117 | The default settings for RTC DS1337 keeps the OSC | |
118 | output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to | |
119 | turn it off. | |
120 | ||
121 | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
122 | ||
123 | commit 438a4c11260b4ea9805039b0b4f92f9df5306b02 | |
124 | Author: Wolfgang Denk <wd@denx.de> | |
125 | Date: Wed Mar 26 11:48:46 2008 +0100 | |
126 | ||
127 | Cleanup coding style, update CHANGELOG | |
128 | ||
129 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
130 | ||
438a4c11 WD |
131 | commit 218ca724c08ca8a649f0917cf201cf23d4b33f39 |
132 | Author: Wolfgang Denk <wd@denx.de> | |
133 | Date: Wed Mar 26 10:40:12 2008 +0100 | |
134 | ||
135 | README: update documentation (availability, links, etc.) | |
136 | ||
137 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
138 | ||
139 | commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 | |
140 | Author: Aras Vaichas <arasv@magtech.com.au> | |
141 | Date: Tue Mar 25 12:09:07 2008 +1100 | |
142 | ||
143 | USB Storage, add meaningful return value | |
144 | ||
145 | This patch changes the "usb storage" command to return success if it | |
146 | finds a USB storage device, otherwise it returns error. | |
147 | ||
148 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> | |
149 | ||
150 | commit 18e69a35efbb078403db0c0063986470dad7d082 | |
151 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
152 | Date: Fri Mar 14 23:20:18 2008 +0300 | |
153 | ||
154 | 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role | |
155 | ||
156 | Linux understands "host" (default), "peripheral" and "otg" (broken). | |
157 | Though, U-Boot doesn't restrict dr_mode variable to these values (think | |
158 | of renames in future). | |
159 | ||
160 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
161 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
162 | ||
163 | commit c7604783b236e368f225efb7b3efb418fe20b404 | |
164 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
165 | Date: Fri Mar 14 23:20:30 2008 +0300 | |
166 | ||
167 | tsec: fix link detection for the RTL8211B PHY | |
168 | ||
169 | RTL8211B sets link state register after autonegotiation complete, | |
170 | so with bootdelay=0 RTL8211B will report lack of the link. | |
171 | ||
172 | To fix this, we should wait for aneg to complete, even if the | |
173 | link is currently down. | |
174 | ||
175 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
176 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
177 | ||
178 | commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4 | |
179 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
180 | Date: Mon Mar 24 20:47:09 2008 +0300 | |
181 | ||
182 | mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups | |
183 | ||
184 | device_type = "soc" is being deprecated, newer device trees will use | |
185 | "fsl,soc" and/or "fsl,immr" for the soc nodes. | |
186 | ||
187 | This patch also adds clock-frequency property for soc nodes (the same | |
188 | value as bus-frequency). | |
189 | ||
190 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
191 | ||
192 | commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07 | |
193 | Author: Joe D'Abbraccio <ljd015@freescale.com> | |
194 | Date: Mon Mar 24 13:00:59 2008 -0400 | |
195 | ||
196 | Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock | |
197 | ||
198 | With the original value of 1/2 clock cycle delay, the system ran relatively | |
199 | stable except when we run benchmarks that are intensive users of memory. | |
200 | When I run samba connected disk with a HDBENCH test, the system locks-up | |
201 | or reboots sporadically. | |
202 | ||
203 | Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> | |
204 | ||
205 | commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923 | |
206 | Author: Scott Wood <scottwood@freescale.com> | |
207 | Date: Mon Mar 24 12:44:13 2008 -0500 | |
208 | ||
209 | mpc83xx: Set PCI I/O bus-address base to zero. | |
210 | ||
211 | The device trees for these boards describe PCI I/O as starting from | |
212 | address zero from the device's perspective. | |
213 | ||
214 | Placing I/O elsewhere may cause problems with certain PCI boards, and may | |
215 | cause problems with Linux. | |
216 | ||
217 | Signed-off-by: Scott Wood <scottwood@freescale.com> | |
218 | ||
219 | commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e | |
220 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
221 | Date: Mon Mar 24 20:47:05 2008 +0300 | |
222 | ||
223 | mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK | |
224 | ||
225 | At least on the "33MHz Pilot" board crystal is actually 33.3MHz. | |
226 | This patch fixes "system time drifting" problem. | |
227 | ||
228 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
229 | ||
230 | commit 3a0cfdd576dc9b16d1468d37339182607c697fb7 | |
231 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
232 | Date: Mon Mar 24 20:47:02 2008 +0300 | |
233 | ||
234 | mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS | |
235 | ||
236 | This is needed to update /choosen/linux,stdout-path properly. | |
237 | ||
238 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
239 | ||
240 | commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9 | |
241 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
242 | Date: Mon Mar 24 20:47:00 2008 +0300 | |
243 | ||
244 | mpc83xx: MPC8360E-RDK: add dhcp command | |
245 | ||
246 | Plus modify environment to use it and remove bootfile env variable, | |
247 | it is internal and CONFIG_BOOTFILE is used for these purposes. | |
248 | ||
249 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
250 | ||
251 | commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa | |
252 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
253 | Date: Mon Mar 24 20:46:57 2008 +0300 | |
254 | ||
255 | mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc | |
256 | ||
257 | Current DDR setup easily causes memory corruption, this patch fixes it. | |
258 | ||
259 | Also fix TIMING_CFG0_MRS_CYC definition. | |
260 | ||
261 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
262 | ||
263 | commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a | |
264 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
265 | Date: Mon Mar 24 20:46:53 2008 +0300 | |
266 | ||
267 | mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI | |
268 | ||
269 | This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen | |
270 | controller and FHCI (QE USB). | |
271 | ||
272 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
273 | ||
274 | commit 7ad959490962e6842648d87d4bd795ea6cdcce67 | |
275 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
276 | Date: Mon Mar 24 20:46:51 2008 +0300 | |
277 | ||
278 | mpc83xx: MPC8360E-RDK: add support for NAND | |
279 | ||
280 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
281 | ||
282 | commit 9a3e832aeb491861d029991241572ebdf4b5b61b | |
283 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
284 | Date: Mon Mar 24 20:46:46 2008 +0300 | |
285 | ||
286 | mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode | |
287 | ||
288 | This is needed for BCM PHYs to work on this board. | |
289 | ||
290 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
291 | ||
292 | commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e | |
293 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
294 | Date: Mon Mar 24 20:46:34 2008 +0300 | |
295 | ||
296 | uec: add support for Broadcom BCM5481 Gigabit PHY | |
297 | ||
298 | This patch adds basic support for Broadcom BCM5481 PHY. | |
299 | ||
300 | RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is | |
301 | Peter Barada <peterb@logicpd.com>. | |
302 | ||
303 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
304 | ||
305 | commit 6a600c3a1876bc203445df4f0fd6b12648259666 | |
306 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
307 | Date: Mon Mar 24 20:46:28 2008 +0300 | |
308 | ||
309 | uec: add support for RGMII_RXID interface mode | |
310 | ||
311 | PHY drivers will use it to setup software delay between RXD and RXC | |
312 | signals. | |
313 | ||
314 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
315 | ||
316 | commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d | |
317 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
318 | Date: Mon Mar 24 20:46:24 2008 +0300 | |
319 | ||
320 | uec: add support for gbit mii status readings | |
321 | ||
322 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
323 | ||
324 | commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d | |
325 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
326 | Date: Mon Mar 24 17:40:47 2008 +0300 | |
327 | ||
328 | 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards | |
329 | ||
330 | This is primarily for the early console support. | |
331 | ||
332 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
333 | ||
334 | commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635 | |
335 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
336 | Date: Mon Mar 24 17:40:43 2008 +0300 | |
337 | ||
338 | 83xx: initialize serdes for MPC837XRDB boards | |
339 | ||
340 | On the MPC8377ERDB: 2 SATA and 2 PCI-E. | |
341 | On the MPC8378ERDB: 2 PCI-E | |
342 | On the MPC8379ERDB: 4 SATA | |
343 | ||
344 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
345 | ||
346 | commit 453316a2a19642d8afcbca7452e40a6b44a197b1 | |
347 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
348 | Date: Mon Mar 24 17:40:32 2008 +0300 | |
349 | ||
350 | 83xx: serdes setup routines | |
351 | ||
352 | This patch adds few routines to configure serdes on 837x targets. | |
353 | ||
354 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
355 | ||
356 | commit a796cdf9c377cb4e5d61d1079a296608f8fbd903 | |
357 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
358 | Date: Mon Mar 24 17:40:27 2008 +0300 | |
359 | ||
360 | 83xx: split COBJS onto separate lines | |
361 | ||
362 | ..plus get rid of some #ifdefs in the .c files. | |
363 | ||
364 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
365 | ||
366 | commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3 | |
367 | Author: Anton Vorontsov <avorontsov@ru.mvista.com> | |
368 | Date: Mon Mar 24 17:40:23 2008 +0300 | |
369 | ||
370 | 83xx: nand support for MPC837XRDB boards | |
371 | ||
372 | Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> | |
373 | ||
374 | commit 82e45a204190593e8613145a928f998fb8c909c4 | |
375 | Author: Jerry Van Baren <gvb.uboot@gmail.com> | |
376 | Date: Tue Mar 18 21:44:41 2008 -0400 | |
377 | ||
378 | Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS. | |
379 | ||
380 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
381 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
382 | ||
383 | commit 0fa7a1b4719e325fce332689fb8754ec166191ff | |
384 | Author: Michael Barkowski <michael.barkowski@freescale.com> | |
385 | Date: Thu Mar 20 13:15:39 2008 -0400 | |
386 | ||
387 | mpc8323erdb: remove RTC and add EEPROM | |
388 | ||
389 | There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM. | |
390 | ||
391 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> | |
392 | Acked-by: Kim Phillips <kim.phillips@freescale.com> | |
393 | ||
394 | commit 5bbeea86eb6afb872374cd23217cb3c1018443ed | |
395 | Author: Michael Barkowski <michael.barkowski@freescale.com> | |
396 | Date: Thu Mar 20 13:15:34 2008 -0400 | |
397 | ||
398 | mpc8323erdb: Improve the system performance | |
399 | ||
400 | The following changes are based on kernel UCC ethernet performance: | |
401 | ||
402 | 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode | |
403 | 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT | |
404 | switch to enable this setting. | |
405 | ||
406 | The following changes are based on the App Note AN3369 and | |
407 | verified to improve memory latency using LMbench: | |
408 | ||
409 | 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0 | |
410 | 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting | |
411 | previously. | |
412 | 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on | |
413 | Twr=15ns, and this was already the setting in DDR_MODE) | |
414 | 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on | |
415 | Trp=15ns) | |
416 | 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on | |
417 | Tras=40ns) | |
418 | 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on | |
419 | Trcd=15ns) | |
420 | 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on | |
421 | Trfc=75ns) | |
422 | 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based | |
423 | on Tfaw=50ns) | |
424 | 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based | |
425 | on CL=3 and WL=2). | |
426 | ||
427 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> | |
428 | Acked-by: Kim Phillips <kim.phillips@freescale.com> | |
429 | ||
430 | commit fc549c871f43933396a5b3e21d897023d4b31b8d | |
431 | Author: Michael Barkowski <michael.barkowski@freescale.com> | |
432 | Date: Thu Mar 20 13:15:28 2008 -0400 | |
433 | ||
434 | mpc8323erdb: use readable DDR config macros | |
435 | ||
436 | Use available shift/mask macros to define DDR configuration. | |
437 | ||
438 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> | |
439 | Acked-by: Kim Phillips <kim.phillips@freescale.com> | |
440 | ||
441 | commit 89c7784ed90ba50301eec521144f95111e472906 | |
442 | Author: Timur Tabi <timur@freescale.com> | |
443 | Date: Fri Feb 8 13:15:55 2008 -0600 | |
444 | ||
445 | 83xx: Add Vitesse VSC7385 firmware uploading | |
446 | ||
447 | Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload | |
448 | the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. | |
449 | Cleaned up the board header files to make selecting the VSC7385 easier to | |
450 | control. | |
451 | ||
452 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
453 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
454 | ||
455 | commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc | |
456 | Author: Timur Tabi <timur@freescale.com> | |
457 | Date: Fri Feb 8 13:15:54 2008 -0600 | |
458 | ||
459 | NET: Add Vitesse VSC7385 firmware uploading | |
460 | ||
461 | The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX | |
462 | and other boards. A small firwmare must be uploaded to its on-board memory | |
463 | before it can be enabled. This patch adds the code which uploads firmware | |
464 | (but not the firmware itself). | |
465 | ||
466 | Previously, this feature was provided by a U-Boot application that was | |
467 | made available only on Freescale BSPs. The VSC7385 firmware must still | |
468 | be obtained separately, but at least there is no longer a need for a separate | |
469 | application. | |
470 | ||
471 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
472 | Acked-by: Ben Warren <biggerbadderben@gmail.com> | |
473 | ||
474 | commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855 | |
475 | Author: Wolfgang Denk <wd@denx.de> | |
476 | Date: Wed Mar 26 00:52:10 2008 +0100 | |
477 | ||
478 | Coding Style cleanyp; update CHANGELOG | |
479 | ||
480 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
481 | ||
aa6f6d17 WD |
482 | commit 43ddd9c820fec44816188f53346b464e20b3142d |
483 | Author: Jerry Van Baren <gvb.uboot@gmail.com> | |
484 | Date: Sat Mar 22 14:23:49 2008 -0400 | |
485 | ||
486 | Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T | |
487 | ||
488 | These defines embedded the u-boot env variables and/or the bd_t structure | |
489 | in the fdt blob. The conclusion of discussion on the u-boot email list | |
490 | was that embedding these in the fdt blob is not useful: there are better | |
491 | ways of passing the data (in fact, the fdt blob itself replaces the | |
492 | bd_t struct). | |
493 | ||
494 | The only board that enables these is the stxxtc and they don't appear | |
495 | to be used by linux. | |
496 | ||
497 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
498 | Acked-by: Kim Phillips <kim.phillips@freescale.com> | |
499 | ||
500 | commit 22ed2285743359fd1fe73e411dff914b2256e68f | |
501 | Author: Stefan Roese <sr@denx.de> | |
502 | Date: Mon Mar 17 10:49:25 2008 +0100 | |
503 | ||
504 | rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile | |
505 | ||
506 | Signed-off-by: Stefan Roese <sr@denx.de> | |
507 | ||
508 | commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d | |
509 | Author: Kyungmin Park <kmpark@infradead.org> | |
510 | Date: Mon Mar 17 08:54:06 2008 +0900 | |
511 | ||
512 | Add Flex-OneNAND booting support | |
513 | ||
514 | Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array | |
515 | using a NOR Flash interface. This on-chip integration enables system designers | |
516 | to reduce external system logic and use high-density NAND Flash | |
517 | in applications that would otherwise have to use more NOR components. | |
518 | ||
519 | Flex-OneNAND enables users to configure to partition it into SLC and MLC areas | |
520 | in more flexible way. While MLC area of Flex-OneNAND can be used to store data | |
521 | that require low reliability and high density, SLC area of Flex-OneNAND | |
522 | to store data that need high reliability and high performance. Flex-OneNAND | |
523 | can let users take advantage of storing these two different types of data | |
524 | into one chip, which is making Flex-OneNAND more cost- and space-effective. | |
525 | ||
526 | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> | |
527 | ||
528 | commit c512389cc4a10253249271ff6c887c6dab1f0db2 | |
529 | Author: André Schwarz <andre.schwarz@matrix-vision.de> | |
530 | Date: Thu Mar 13 13:50:52 2008 +0100 | |
531 | ||
532 | MPC5200: support setup without FEC | |
533 | ||
534 | Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is | |
535 | defined. Systems without FEC, i.e. no FEC node in DTB, should be possible. | |
536 | ||
537 | Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> | |
538 | Acked-by: Grant Likely <grant.likely@secretlab.ca> | |
539 | ||
540 | commit aa3511e422946041ef626f80a05ae5e8bfc700e6 | |
541 | Author: Jon Loeliger <jdl@freescale.com> | |
542 | Date: Wed Mar 5 18:05:46 2008 -0600 | |
543 | ||
544 | FSL: Move board/mpc8266ads under board/freescale | |
545 | ||
546 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
547 | ||
548 | commit 7f1d846e5c5754449c286587d099d85246062772 | |
549 | Author: Jon Loeliger <jdl@freescale.com> | |
550 | Date: Wed Mar 5 18:05:47 2008 -0600 | |
551 | ||
552 | FSL: Move board/mpc7448hpc2 under board/freescale | |
553 | ||
554 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
555 | ||
556 | commit b7e24d283e34727c2a6cdfdac2e09a426c579b73 | |
557 | Author: Jon Loeliger <jdl@freescale.com> | |
558 | Date: Wed Mar 5 18:05:45 2008 -0600 | |
559 | ||
560 | FSL: Move board/mpc8260ads under board/freescale | |
561 | ||
562 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
563 | ||
564 | commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97 | |
565 | Author: goda.yusuke <goda.yusuke@renesas.com> | |
566 | Date: Wed Mar 5 17:08:33 2008 +0900 | |
567 | ||
568 | net: Add support AX88796L ethernet device | |
569 | ||
570 | AX88796L is device of NE2000 compatible. | |
571 | This patch support AX88796L ethernet device. | |
572 | ||
573 | Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> | |
574 | Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
575 | ||
576 | commit e0a6140dd381e1eed1ada2291166ef2616d8822b | |
577 | Author: Wolfgang Denk <wd@denx.de> | |
578 | Date: Tue Mar 25 22:50:41 2008 +0100 | |
579 | ||
580 | ne2000 driver: change #ifdef to Makefile conditional compilation | |
581 | ||
582 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
583 | ||
584 | commit e710185aae90c64d39c2d453e40e58ceefe4f250 | |
585 | Author: goda.yusuke <goda.yusuke@renesas.com> | |
586 | Date: Wed Mar 5 17:08:20 2008 +0900 | |
587 | ||
588 | net: Divided code of NE2000 ethernet driver | |
589 | ||
590 | There are more devices of the NE2000 base. | |
591 | A present code is difficult for us to support more devices. | |
592 | To support more NE2000 clone devices, separated the function. | |
593 | ||
594 | Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> | |
595 | Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
596 | ||
597 | commit 395bce4f59a507a60a475f7ee46bed47de9482df | |
598 | Author: Mike Frysinger <vapier@gentoo.org> | |
599 | Date: Sun Feb 24 23:58:13 2008 -0500 | |
600 | ||
601 | net/Blackfin: move on-chip MAC driver into drivers/net/ | |
602 | ||
603 | The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board | |
604 | directory, but it is not board specific, so relocate it to the drivers dir | |
605 | so that other Blackfin ports can utilize it. | |
606 | ||
607 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
608 | ||
609 | commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a | |
610 | Author: Mike Frysinger <vapier@gentoo.org> | |
611 | Date: Sun Feb 24 23:52:35 2008 -0500 | |
612 | ||
613 | smc91111: use SSYNC() rather than asm(ssync) for Blackfin | |
614 | ||
615 | Since the "ssync" instruction may have hardware anomalies associated with | |
616 | it, have the smc91111 driver use the SSYNC macro rather than invoking it | |
617 | directly. We workaround all the anomalies via this macro. | |
618 | ||
619 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
620 | ||
621 | commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138 | |
622 | Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> | |
623 | Date: Sun Feb 17 22:57:47 2008 +0000 | |
624 | ||
625 | 8xx: Update OF support on 8xx | |
626 | ||
627 | This patch does some shifting around of OF support on 8xx. | |
628 | ||
629 | Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> | |
630 | ||
631 | commit 9c666a7db0b2285a270c68810889ce7d5dba304b | |
632 | Author: Kumar Gala <galak@kernel.crashing.org> | |
633 | Date: Fri Feb 15 15:16:18 2008 -0600 | |
634 | ||
635 | ppc: Allow boards to specify how much memory they can map | |
636 | ||
637 | For historical reasons we limited the stack to 256M because some boards | |
638 | could only map that much via BATS. However newer boards are capable of | |
639 | mapping more memory (for example 85xx is capble of doing up to 2G). | |
640 | ||
641 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
642 | ||
643 | commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb | |
644 | Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> | |
645 | Date: Fri Feb 15 01:05:58 2008 +0000 | |
646 | ||
647 | 8xx : Add OF support to Adder875 board port - resubmit | |
648 | ||
649 | Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> | |
650 | ||
651 | commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d | |
652 | Author: Kumar Gala <galak@kernel.crashing.org> | |
653 | Date: Thu Feb 14 20:44:42 2008 -0600 | |
654 | ||
655 | Add setexpr command | |
656 | ||
657 | Add a simple expr style command that will set an env variable as the result | |
658 | of the command. This allows us to do simple math in shell. The following | |
659 | operations are supported: &, |, ^, +, -, *, /. | |
660 | ||
661 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
662 | ||
663 | commit 3f105faa64b9826e088711fdfcaa70cb1230397a | |
664 | Author: Jon Loeliger <jdl@freescale.com> | |
665 | Date: Wed Mar 5 17:27:48 2008 -0600 | |
666 | ||
667 | FSL: Move board/mpc7448hpc2 under board/freescale | |
668 | ||
669 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
670 | ||
671 | commit 449c703374a8868453425e15da7e2f76221b72e4 | |
672 | Author: Jon Loeliger <jdl@freescale.com> | |
673 | Date: Wed Mar 5 17:21:43 2008 -0600 | |
674 | ||
675 | FSL: Move board/mpc8266ads under board/freescale | |
676 | ||
677 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
678 | ||
679 | commit 5863577989ad689427bb750107e9a75f1c1645d2 | |
680 | Author: Jon Loeliger <jdl@freescale.com> | |
681 | Date: Wed Mar 5 16:41:41 2008 -0600 | |
682 | ||
683 | FSL: Move board/mpc8260ads under board/freescale | |
684 | ||
685 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
686 | ||
687 | commit 8a773983957ee6c4aa344469b742f29c7d26afbd | |
688 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
689 | Date: Tue Mar 25 21:30:08 2008 +0900 | |
690 | ||
691 | [MIPS] Move gth2_config from ARM section to MIPS | |
692 | ||
693 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
694 | ||
695 | commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15 | |
696 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
697 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
698 | ||
699 | [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB | |
700 | ||
701 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
702 | ||
703 | commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459 | |
704 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
705 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
706 | ||
707 | [MIPS] Fix dcache_status() | |
708 | ||
709 | You can't judge UNCACHED by Config.K0 LSB. | |
710 | ||
711 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
712 | ||
713 | commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34 | |
714 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
715 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
716 | ||
717 | [MIPS] Introduce _machine_restart | |
718 | ||
719 | Handles machine specific functions by using weak functions. | |
720 | ||
721 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
722 | ||
723 | commit decaba6f5cf386d569ac3997bebb871b966c6b18 | |
724 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
725 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
726 | ||
727 | [MIPS] Cleanup CP0 Status initialization | |
728 | ||
729 | Add setup_c0_status from Linux. For the moment we disable interrupts, set | |
730 | CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for | |
731 | reset-time configuration and will work well across most processors. | |
732 | ||
733 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
734 | ||
735 | commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23 | |
736 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
737 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
738 | ||
739 | [MIPS] Initialize CP0 Cause before setting up CP0 Status register | |
740 | ||
741 | Without this change, we'll be suffering from deffered WATCH exception | |
742 | once Status.EXL is cleared. Make sure Cause.WP is cleared. | |
743 | ||
744 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
745 | ||
746 | commit 26138623230ca2bad3c78e05a65527ea70c8b688 | |
747 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
748 | Date: Tue Mar 25 21:30:07 2008 +0900 | |
749 | ||
750 | [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init() | |
751 | ||
752 | Move things to appropriate place. | |
753 | ||
754 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
755 | ||
756 | commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895 | |
757 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
758 | Date: Tue Mar 25 21:30:06 2008 +0900 | |
759 | ||
760 | [MIPS] Implement flush_cache() | |
761 | ||
762 | We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you | |
763 | don't need to do Hit_Invalidate_I, but flush_cache() needs it since this | |
764 | function is used not only in U-Boot specfic programs but also at loading | |
765 | target binaries. | |
766 | ||
767 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
768 | ||
769 | commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d | |
770 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
771 | Date: Tue Mar 25 21:30:06 2008 +0900 | |
772 | ||
773 | [MIPS] Fix I-/D-cache initialization loops | |
774 | ||
775 | Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I | |
776 | again per a loop for I-cache initialization. But according to 'See MIPS | |
777 | Run', we're encouraged to use three separate loops rather than combining | |
778 | them *for both I- and D-cache*. This patch tries to fix this. | |
779 | ||
780 | In accordance with fixing above, mips_init_[id]cache are separated from | |
781 | mips_cache_reset(), and rewrite cache loops are completely rewritten with | |
782 | useful macros. | |
783 | ||
784 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
785 | ||
786 | commit 1898840797c7f50799377bd5b285a8a93a82c419 | |
787 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
788 | Date: Tue Mar 25 21:30:06 2008 +0900 | |
789 | ||
790 | [MIPS] Replace memory clearance code with f_fill64 | |
791 | ||
792 | This routine fills memory with zero by 64 bytes, and is 64-bit capable. | |
793 | ||
794 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
795 | ||
796 | commit 2f5d414ccb4024dd0992ff6b22561732dbc73590 | |
797 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
798 | Date: Tue Mar 25 21:30:06 2008 +0900 | |
799 | ||
800 | [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros | |
801 | ||
802 | This patch replaces the current function definitions with NESTED, LEAF | |
803 | and END macro. They specify some more additional information about the | |
804 | function; an alignment of symbol, type of symbol, stack frame usage, etc. | |
805 | These information explicitly tells the assembler and the debugger about | |
806 | the types of code we want to generate. | |
807 | ||
808 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
809 | ||
810 | commit 282223a607c611425fa33f5428f8eae6636972bb | |
811 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
812 | Date: Tue Mar 25 11:43:17 2008 +0900 | |
813 | ||
814 | [MIPS] asm headers' updates | |
815 | ||
816 | Make some asm headers adjusted to the latest Linux kernel. | |
817 | ||
818 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
819 | ||
820 | commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd | |
821 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
822 | Date: Tue Mar 25 11:39:29 2008 +0900 | |
823 | ||
824 | [MIPS] Request for the 'mips_cache_lock()' removal | |
825 | ||
826 | The initial intension of having mips_cache_lock() was to use the cache | |
827 | as memory for temporary stack use so that a C environment can be set up | |
828 | as early as possible. | |
829 | ||
830 | But now mips_cache_lock() follow lowlevel_init(). We've already have the | |
831 | real memory initilaized at this point, therefore we could/should use it. | |
832 | No reason to lock at all. | |
833 | ||
834 | Other problems: | |
835 | ||
836 | Cache locking is not consistent across MIPS implementaions. Some imple- | |
837 | mentations don't support locking at all. The style of locking varies - | |
838 | some support per line locking, others per way, etc. Some parts use bits | |
839 | in status registers instead of cache ops. Current mips_cache_lock() is | |
840 | not necessarily general-purpose. | |
841 | ||
842 | And this is worthy of special mention; once U-Boot/MIPS locks the lines, | |
843 | they are never get unlocked, so the code relies on whatever gets loaded | |
844 | after U-Boot to re-initialize the cache and clear the locks. We're sup- | |
845 | posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented, | |
846 | but leave the situation as it is for a long time. | |
847 | ||
848 | For these reasons, I proposed the removal of mips_cache_lock() from the | |
849 | global start-up code. | |
850 | ||
851 | This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that | |
852 | *things have changed*. If he wants the same behavior as before, he needs | |
853 | to have CFG_INIT_RAM_LOCK_MIPS in his config file. | |
854 | ||
855 | If we don't have any regression report through several releases, then | |
856 | we'll remove codes entirely. | |
857 | ||
858 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
859 | Acked-by: Andrew Dyer <amdyer@gmail.com> | |
860 | ||
861 | commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f | |
862 | Author: Yuri Tikhonov <yur@emcraft.com> | |
863 | Date: Mon Mar 24 11:30:54 2008 +0100 | |
864 | ||
865 | lwmon5 SYSMON POST: fix backlight control | |
866 | ||
867 | If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be | |
868 | run on the board, then the SYSMON POST controls the display backlight | |
869 | (doesn't switch backlight ON if POST FAILED, and does switch the | |
870 | backlight ON if PASSED). | |
871 | ||
872 | If not, then the video driver controls the display backlight (just | |
873 | switch ON the backlight upon initialization). | |
874 | ||
875 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
876 | ||
877 | commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8 | |
878 | Author: Yuri Tikhonov <yur@emcraft.com> | |
879 | Date: Mon Mar 24 11:29:14 2008 +0100 | |
880 | ||
881 | lwmon5 SYSMON POST: fix handling of negative temperatures | |
882 | ||
883 | Fix errors in the LWMON5 Sysmon POST for negative temperatures. | |
884 | ||
885 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
886 | ||
887 | commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 | |
888 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
889 | Date: Fri Mar 7 16:04:25 2008 +0900 | |
890 | ||
891 | pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option | |
892 | ||
893 | In current source code, when the device number of PCI is 0, process PCI | |
894 | bridge without fail. However, when the device number is 0, it is not PCI | |
895 | always bridge. There are times when device of PCI allocates. | |
896 | ||
897 | When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when | |
898 | use this patch. | |
899 | ||
900 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
901 | Acked-by: Stefan Roese <sr@denx.de> | |
902 | ||
903 | commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb | |
904 | Author: Yuri Tikhonov <yur@emcraft.com> | |
905 | Date: Fri Mar 21 09:18:40 2008 +0100 | |
906 | ||
907 | LWMON5: fix dsPIC POST | |
908 | ||
909 | Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST. | |
910 | ||
911 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> --- | |
912 | ||
438a4c11 WD |
913 | commit 388b82fddc7c05596f3f615f190da0448227dc82 |
914 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
915 | Date: Thu Mar 20 23:23:13 2008 +0100 | |
916 | ||
917 | [new uImage] Enable new uImage support for the pcs440ep board. | |
918 | ||
919 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
920 | ||
921 | commit 95f4ec2b9c910c7261e6f060ea530d58b039692d | |
922 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
923 | Date: Thu Mar 20 23:23:13 2008 +0100 | |
924 | ||
925 | [new uImage] Do not compile new uImage format support by default | |
926 | ||
927 | Disable default building of new uImage format support in preparation | |
928 | for merge with the master. Support for new format can be enabled on | |
929 | a per-board basis, by defining the following in the board's config file: | |
930 | ||
931 | #define CONFIG_FIT 1 | |
932 | #define CONFIG_OF_LIBFDT 1 | |
933 | ||
934 | This can be optionally defined to give more verbose output: | |
935 | ||
936 | #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ | |
937 | ||
938 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
939 | ||
940 | commit dafaede8a46c7159310239e036c93e31c6374487 | |
941 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
942 | Date: Thu Mar 20 23:20:31 2008 +0100 | |
943 | ||
944 | [new uImage] Disable debuging output in preparation for merge with master | |
945 | ||
946 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
947 | ||
948 | commit fbe7a155027beacebaee9b32e1ada781fe924bca | |
949 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
950 | Date: Thu Mar 20 19:38:45 2008 +0100 | |
951 | ||
952 | [new uImage] Compilation and new uImage handling fixes for imxtract | |
953 | ||
954 | Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in | |
955 | include/config_cmd_default.h. Fix few warnings and handling of new format | |
956 | images. | |
957 | ||
958 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
959 | ||
960 | commit 36cc8cbb3379d5166f882641123521735c469f92 | |
961 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
962 | Date: Thu Mar 20 23:10:19 2008 +0100 | |
963 | ||
964 | [new uImage] Fix autoscr command used with new uImage format | |
965 | ||
966 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
967 | ||
968 | commit 43142e817f0597be412e7cbe19413f5532eafa5d | |
969 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
970 | Date: Thu Mar 20 23:10:19 2008 +0100 | |
971 | ||
972 | [new uImage] Fix *.its files location in documentation | |
973 | ||
974 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
975 | ||
aa6f6d17 WD |
976 | commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e |
977 | Author: Wolfgang Denk <wd@denx.de> | |
978 | Date: Thu Mar 20 22:01:38 2008 +0100 | |
979 | ||
980 | lwmon5 POST: remove unreachable code | |
981 | ||
982 | plus some coding style cleanup | |
983 | ||
984 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
985 | ||
986 | commit b73a19e1609d0f705cbab8014ca17aefe89e4c76 | |
987 | Author: Yuri Tikhonov <yur@emcraft.com> | |
988 | Date: Thu Mar 20 17:56:04 2008 +0300 | |
989 | ||
990 | LWMON5: POST RTC fix | |
991 | ||
992 | Modify the RTC API to provide one a status for the time reported by | |
993 | the rtc_get() function: | |
994 | 0 - a reliable time is guaranteed, | |
995 | < 0 - a reliable time isn't guaranteed (power fault, clock issues, | |
996 | and so on). | |
997 | ||
998 | The RTC chip drivers are responsible for providing this info if the | |
999 | corresponding chip supports such functionality. If not - always | |
1000 | report that the time is reliable. | |
1001 | ||
1002 | The POST RTC test was modified to detect the RTC faults utilizing | |
1003 | this new rtc_get() feature. | |
1004 | ||
1005 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
1006 | ||
1007 | commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5 | |
1008 | Author: Martin Krause <martin.krause@tqs.de> | |
1009 | Date: Wed Mar 19 14:25:14 2008 +0100 | |
1010 | ||
1011 | TQM5200B: update MTD partition layout | |
1012 | ||
1013 | - insert partition for dtb blob to TQM5200B MTD layout | |
1014 | - set env variables dependent on the configured board | |
1015 | (TQM5200 or TQM5200B) | |
1016 | ||
1017 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
1018 | ||
1019 | commit f0105727d132f56a21fa3ed8b162309cca6cac44 | |
1020 | Author: Stefan Roese <sr@denx.de> | |
1021 | Date: Wed Mar 19 07:09:26 2008 +0100 | |
1022 | ||
1023 | CFI: Small cleanup for FLASH_SHOW_PROGRESS | |
1024 | ||
1025 | With this patch we don't need that many #ifdef's in the code. It moves | |
1026 | the subtraction into the macro and defines a NOP-macro when | |
1027 | CONFIG_FLASH_SHOW_PROGRESS is not defined. | |
1028 | ||
1029 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1030 | Acked-by: Gerald Van Baren <vanbaren@cideas.com> | |
1031 | ||
1032 | commit 9a042e9ca512beaaa2cb450274313fc477141241 | |
1033 | Author: Jerry Van Baren <gvb.uboot@gmail.com> | |
1034 | Date: Sat Mar 8 13:48:01 2008 -0500 | |
1035 | ||
1036 | Flash programming progress countdown. | |
1037 | ||
1038 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
1039 | ||
438a4c11 WD |
1040 | commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f |
1041 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
1042 | Date: Wed Mar 19 10:00:06 2008 +0100 | |
1043 | ||
1044 | [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org> | |
1045 | ||
1046 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
1047 | ||
aa6f6d17 WD |
1048 | commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1 |
1049 | Author: David Gibson <david@gibson.dropbear.id.au> | |
1050 | Date: Mon Feb 18 18:09:04 2008 +1100 | |
1051 | ||
1052 | libfdt: Remove no longer used code from fdt_node_offset_by_compatible() | |
1053 | ||
1054 | Since fdt_node_offset_by_compatible() was converted to the new | |
1055 | fdt_next_node() iterator, a chunk of initialization code became | |
1056 | redundant, but was not removed by oversight. This patch cleans it up. | |
1057 | ||
1058 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
1059 | ||
1060 | commit d0ccb9b140b472039732de102fc14597eedb14df | |
1061 | Author: David Gibson <david@gibson.dropbear.id.au> | |
1062 | Date: Mon Feb 18 18:06:31 2008 +1100 | |
1063 | ||
1064 | libfdt: Trivial cleanup for CHECK_HEADER) | |
1065 | ||
1066 | Currently the CHECK_HEADER() macro is defined local to fdt_ro.c. | |
1067 | However, there are a handful of functions (fdt_move, rw_check_header, | |
1068 | fdt_open_into) from other files which could also use it (currently | |
1069 | they open-code something more-or-less identical). Therefore, this | |
1070 | patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those | |
1071 | places. | |
1072 | ||
1073 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
1074 | ||
1075 | commit fe30a354cdbb808b5f15366a935b151a4ccee74f | |
1076 | Author: Kumar Gala <galak@kernel.crashing.org> | |
1077 | Date: Wed Feb 20 14:32:36 2008 -0600 | |
1078 | ||
1079 | Fix fdt boardsetup command parsing | |
1080 | ||
1081 | The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'. | |
1082 | ||
1083 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
1084 | ||
1085 | commit 804887e6001e2f00bea11431bf34d6d472512cda | |
1086 | Author: Kumar Gala <galak@kernel.crashing.org> | |
1087 | Date: Fri Feb 15 03:34:36 2008 -0600 | |
1088 | ||
1089 | Add sub-commands to fdt | |
1090 | ||
1091 | fdt header - Display header info | |
1092 | fdt bootcpu <id> - Set boot cpuid | |
1093 | fdt memory <addr> <size> - Add/Update memory node | |
1094 | fdt rsvmem print - Show current mem reserves | |
1095 | fdt rsvmem add <addr> <size> - Add a mem reserve | |
1096 | fdt rsvmem delete <index> - Delete a mem reserves | |
1097 | ||
1098 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
1099 | ||
1100 | commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07 | |
1101 | Author: David Gibson <david@gibson.dropbear.id.au> | |
1102 | Date: Thu Feb 14 16:50:34 2008 +1100 | |
1103 | ||
1104 | libfdt: Fix NOP handling bug in fdt_add_subnode_namelen() | |
1105 | ||
1106 | fdt_add_subnode_namelen() has a bug if asked to add a subnode to a | |
1107 | node which has NOP tags interspersed with its properties. In this | |
1108 | case fdt_add_subnode_namelen() will put the new subnode before the | |
1109 | first NOP tag, even if there are properties after it, which will | |
1110 | result in an invalid blob. | |
1111 | ||
1112 | This patch fixes the bug, and adds a testcase for it. | |
1113 | ||
1114 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
1115 | ||
1116 | commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9 | |
1117 | Author: David Gibson <david@gibson.dropbear.id.au> | |
1118 | Date: Tue Feb 12 11:58:31 2008 +1100 | |
1119 | ||
1120 | libfdt: Add and use a node iteration helper function. | |
1121 | ||
1122 | This patch adds an fdt_next_node() function which can be used to | |
1123 | iterate through nodes of the tree while keeping track of depth. This | |
1124 | function is used to simplify the iteration code in a lot of other | |
1125 | functions, and is also exported for use by library users. | |
1126 | ||
1127 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
1128 | ||
1129 | commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d | |
1130 | Author: David Gibson <david@gibson.dropbear.id.au> | |
1131 | Date: Fri Jan 11 14:55:05 2008 +1100 | |
1132 | ||
1133 | libfdt: Add fdt_set_name() function | |
1134 | ||
1135 | This patch adds an fdt_set_name() function to libfdt, mirroring | |
1136 | fdt_get_name(). This is a r/w function which alters the name of a | |
1137 | given device tree node. | |
1138 | ||
1139 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
1140 | ||
1141 | commit 23e20aa6488e6c0622496549861bfdc74108debe | |
1142 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
1143 | Date: Tue Mar 18 13:33:30 2008 +0100 | |
1144 | ||
1145 | lwmon5: Fix register test logic to match the specific GDC h/w. | |
1146 | ||
1147 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
1148 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
1149 | ||
1150 | commit 46bc0a938779aa1d664b847d36b08aa00f22e539 | |
1151 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
1152 | Date: Tue Mar 18 13:27:57 2008 +0100 | |
1153 | ||
1154 | Fix backlight in the lwmon5 POST. | |
1155 | ||
1156 | Backlight was switched on even when temperature was too low. | |
1157 | ||
1158 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
1159 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
1160 | ||
1161 | commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf | |
1162 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
1163 | Date: Wed Feb 6 18:48:36 2008 +0100 | |
1164 | ||
1165 | The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5). | |
1166 | ||
1167 | To enable this, alternative, configuration the U-Boot board configuration | |
1168 | file for lwmon5 includes the definitions of alternative addresses for header | |
1169 | (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). | |
1170 | ||
1171 | The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, | |
1172 | and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the | |
1173 | lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). | |
1174 | ||
1175 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
1176 | ||
1177 | commit 0f009f781b5b88f25769e154ea4d42db13baf0c6 | |
1178 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
1179 | Date: Mon Feb 4 17:11:53 2008 +0100 | |
1180 | ||
1181 | Add support for the lwmon5 board reset via GPIO58. | |
1182 | ||
1183 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
1184 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
1185 | ||
1186 | commit f694e32f93565ec1fa8d0226c584d6b89e931ed9 | |
1187 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
1188 | Date: Mon Feb 4 17:09:55 2008 +0100 | |
1189 | ||
1190 | Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now. | |
1191 | ||
1192 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
1193 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
1194 | ||
1195 | commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c | |
1196 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
1197 | Date: Mon Feb 4 14:11:03 2008 +0100 | |
1198 | ||
1199 | The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode. | |
1200 | ||
1201 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
1202 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
1203 | ||
1204 | commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184 | |
1205 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
1206 | Date: Mon Feb 4 14:10:42 2008 +0100 | |
1207 | ||
1208 | The patch adds new POST tests for the Lwmon5 board. These are: | |
1209 | ||
1210 | * External Watchdog test; | |
1211 | * dsPIC tests; | |
1212 | * FPGA test; | |
1213 | * GDC test; | |
1214 | * Sysmon tests. | |
1215 | ||
1216 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
1217 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
1218 | ||
1219 | commit c2ed33efbfff5767bca236828e021c55fd547b6c | |
1220 | Author: Yuri Tikhonov <yur@pollux.denx.de> | |
1221 | Date: Mon Feb 4 14:10:01 2008 +0100 | |
1222 | ||
1223 | Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. | |
1224 | ||
1225 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
1226 | ||
1227 | commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2 | |
1228 | Author: Wolfgang Denk <wd@denx.de> | |
1229 | Date: Tue Mar 18 17:35:51 2008 +0100 | |
1230 | ||
1231 | HMI1001: fix compile problem. | |
1232 | ||
1233 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1234 | ||
1235 | commit 1f2a9970109cebf7446e0503b10b71f8673045ee | |
1236 | Author: Mike Frysinger <vapier@gentoo.org> | |
1237 | Date: Mon Feb 18 05:32:30 2008 -0500 | |
1238 | ||
1239 | Blackfin: BF537-stamp: drop board-specific flash driver for CFI | |
1240 | ||
1241 | The parallel flash on the BF537-STAMP is CFI compliant, so there is no need | |
1242 | for the board specific driver at all. Just use the common CFI driver. | |
1243 | ||
1244 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1245 | ||
1246 | commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c | |
1247 | Author: Mike Frysinger <vapier@gentoo.org> | |
1248 | Date: Tue Feb 19 00:36:14 2008 -0500 | |
1249 | ||
1250 | Blackfin: add proper ELF markings to some assembly functions | |
1251 | ||
1252 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1253 | ||
1254 | commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf | |
1255 | Author: Mike Frysinger <vapier@gentoo.org> | |
1256 | Date: Tue Feb 19 00:35:17 2008 -0500 | |
1257 | ||
1258 | Blackfin: new cplbinfo command for viewing cplb tables | |
1259 | ||
1260 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1261 | ||
1262 | commit aadb72503cd1602349a5fe53356d5f55ecc1b900 | |
1263 | Author: Mike Frysinger <vapier@gentoo.org> | |
1264 | Date: Mon Feb 18 05:37:51 2008 -0500 | |
1265 | ||
1266 | Blackfin: update MAINTAINERS list | |
1267 | ||
1268 | Add maintainer information for the Blackfin boards. | |
1269 | ||
1270 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1271 | ||
1272 | commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d | |
1273 | Author: Mike Frysinger <vapier@gentoo.org> | |
1274 | Date: Mon Feb 18 05:26:48 2008 -0500 | |
1275 | ||
1276 | Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU | |
1277 | ||
1278 | Stop tying things to the processor that should be tied to other defines and | |
1279 | change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build | |
1280 | system to select the -mcpu option. | |
1281 | ||
1282 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1283 | ||
1284 | commit 86a20fb920bd198105acf7b1191117f566d637ed | |
1285 | Author: Mike Frysinger <vapier@gentoo.org> | |
1286 | Date: Sat Feb 16 07:40:36 2008 -0500 | |
1287 | ||
1288 | Blackfin: move bootldr command to common code | |
1289 | ||
1290 | This moves the Blackfin-common bootldr command out of the BF537-STAMP | |
1291 | specific board directory and into the common directory so that all Blackfin | |
1292 | boards may utilize it. | |
1293 | ||
1294 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
1295 | ||
1296 | commit decbe029b2a9d3333d02c433389b1c821eea96d7 | |
1297 | Author: Heiko Schocher <hs@denx.de> | |
1298 | Date: Fri Mar 14 11:05:20 2008 +0100 | |
1299 | ||
1300 | mgcoge: update configuration | |
1301 | ||
1302 | Fix configuration for mgcoge board | |
1303 | ||
1304 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
1305 | ||
1306 | commit c136724cda0219c49f1d4b346f00da29b14fdf14 | |
1307 | Author: Wolfgang Denk <wd@denx.de> | |
1308 | Date: Sun Mar 16 01:22:59 2008 +0100 | |
1309 | ||
1310 | drivers/rtc/Makefile: keep list sorted | |
1311 | ||
1312 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1313 | ||
1314 | commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f | |
1315 | Author: Tor Krill <tor@excito.com> | |
1316 | Date: Sat Mar 15 15:40:26 2008 +0100 | |
1317 | ||
1318 | Add support for Intersil isl1208 RTC | |
1319 | ||
1320 | Signed-off-by: Tor Krill <tor@excito.com> | |
1321 | ||
1322 | commit 0210cff3d079d97b2156b13685ee8de368e68a1a | |
1323 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1324 | Date: Sat Mar 15 17:36:41 2008 +0100 | |
1325 | ||
1326 | cramfs: Fix ifdef | |
1327 | ||
1328 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1329 | ||
1330 | commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4 | |
1331 | Author: Wolfgang Denk <wd@denx.de> | |
1332 | Date: Sun Mar 16 01:12:58 2008 +0100 | |
1333 | ||
1334 | Conding style cleanup | |
1335 | ||
1336 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1337 | ||
0b8f2a27 WD |
1338 | commit 41712b4e8c95dff23354bcd620e1f9477160c190 |
1339 | Author: Stefan Roese <sr@denx.de> | |
1340 | Date: Wed Mar 5 12:31:53 2008 +0100 | |
1341 | ||
1342 | ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board | |
1343 | ||
1344 | This patch adds USB OHCI support to the Canyonlands board port. It also | |
1345 | enables EXT2 support. | |
1346 | ||
1347 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1348 | ||
1349 | commit 2596f5b9d353ff3e4387a3325d05740f16958038 | |
1350 | Author: Stefan Roese <sr@denx.de> | |
1351 | Date: Wed Mar 5 12:29:32 2008 +0100 | |
1352 | ||
1353 | usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver | |
1354 | ||
1355 | This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This | |
1356 | way a board just needs to define this new option to enable the "force | |
1357 | NoPowerSwitching mode" instead of adding new CPU/architecture defines | |
1358 | to the USB source itself. | |
1359 | ||
1360 | This new option will be used first with the new AMCC 460EX Canyonlands | |
1361 | board port, which will be posted in a few days. | |
1362 | ||
1363 | This patch also fixes a small compilation problem when DEBUG is enabled. | |
1364 | ||
1365 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1366 | ||
1367 | commit 71665ebf88408ff2acb762af47989fd4365b321a | |
1368 | Author: Stefan Roese <sr@denx.de> | |
1369 | Date: Mon Mar 3 17:27:02 2008 +0100 | |
1370 | ||
1371 | ppc4xx: Add Canyonlands NAND booting support | |
1372 | ||
1373 | 460EX doesn't support a fixed bootstrap option to boot from 512 byte page | |
1374 | NAND devices. The only bootstrap option for NAND booting is option F for | |
1375 | 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap | |
1376 | EEPROM needs to be programmed accordingly. | |
1377 | ||
1378 | This patch adds basic NAND booting support for the AMCC Canyonlands aval | |
1379 | board and also adds support to the "bootstrap" command, to enable NAND | |
1380 | booting I2C setting. | |
1381 | ||
1382 | Tested with 512 byte page NAND device (32MByte) on Canyonlands. | |
1383 | ||
1384 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1385 | ||
1386 | commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2 | |
1387 | Author: Stefan Roese <sr@denx.de> | |
1388 | Date: Tue Mar 11 16:53:00 2008 +0100 | |
1389 | ||
1390 | ppc4xx: Add AMCC Canyonlands support (460EX) (3/3) | |
1391 | ||
1392 | This patch adds support for the AMCC Canyonlands 460EX evaluation | |
1393 | board. | |
1394 | ||
1395 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1396 | ||
1397 | commit 6983fe21f774a924d3adb263a270bc2f301f2aa2 | |
1398 | Author: Stefan Roese <sr@denx.de> | |
1399 | Date: Tue Mar 11 16:52:24 2008 +0100 | |
1400 | ||
1401 | ppc4xx: Add AMCC Canyonlands support (460EX) (2/3) | |
1402 | ||
1403 | This patch adds support for the AMCC Canyonlands 460EX evaluation | |
1404 | board. | |
1405 | ||
1406 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1407 | ||
1408 | commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1 | |
1409 | Author: Stefan Roese <sr@denx.de> | |
1410 | Date: Tue Mar 11 16:51:17 2008 +0100 | |
1411 | ||
1412 | ppc4xx: Add AMCC Canyonlands support (460EX) (1/3) | |
1413 | ||
1414 | This patch adds support for the AMCC Canyonlands 460EX evaluation | |
1415 | board. | |
1416 | ||
1417 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1418 | ||
1419 | commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69 | |
1420 | Author: Stefan Roese <sr@denx.de> | |
1421 | Date: Tue Mar 11 15:11:43 2008 +0100 | |
1422 | ||
1423 | ppc4xx: Add basic support for AMCC 460EX/460GT (5/5) | |
1424 | ||
1425 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
1426 | ||
1427 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1428 | ||
1429 | commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945 | |
1430 | Author: Stefan Roese <sr@denx.de> | |
1431 | Date: Tue Mar 11 15:11:18 2008 +0100 | |
1432 | ||
1433 | ppc4xx: Add basic support for AMCC 460EX/460GT (4/5) | |
1434 | ||
1435 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
1436 | ||
1437 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1438 | ||
1439 | commit 999ecd5aca381984d8ebbeb207ece82a1c275577 | |
1440 | Author: Stefan Roese <sr@denx.de> | |
1441 | Date: Tue Mar 11 15:07:10 2008 +0100 | |
1442 | ||
1443 | ppc4xx: Add basic support for AMCC 460EX/460GT (3/5) | |
1444 | ||
1445 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
1446 | ||
1447 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1448 | ||
1449 | commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a | |
1450 | Author: Stefan Roese <sr@denx.de> | |
1451 | Date: Tue Mar 11 15:05:50 2008 +0100 | |
1452 | ||
1453 | ppc4xx: Add basic support for AMCC 460EX/460GT (2/5) | |
1454 | ||
1455 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
1456 | ||
1457 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1458 | ||
1459 | commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492 | |
1460 | Author: Stefan Roese <sr@denx.de> | |
1461 | Date: Tue Mar 11 15:05:26 2008 +0100 | |
1462 | ||
1463 | ppc4xx: Add basic support for AMCC 460EX/460GT (1/5) | |
1464 | ||
1465 | This patch adds basic support for the AMCC 460EX/460GT PPC's. | |
1466 | ||
1467 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1468 | ||
1469 | commit 56e410178375d9f20be25fb24e180974f0ae120b | |
1470 | Author: Stefan Roese <sr@denx.de> | |
1471 | Date: Tue Feb 19 22:07:57 2008 +0100 | |
1472 | ||
1473 | ppc4xx: interrupt.c reworked | |
1474 | ||
1475 | This patch is a rework of the 4xx interrupt handling done while | |
1476 | adding the 460EX/GT support. Interrupts are needed on 4xx for the | |
1477 | EMAC driver. | |
1478 | ||
1479 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1480 | ||
1481 | commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46 | |
1482 | Author: Stefan Roese <sr@denx.de> | |
1483 | Date: Tue Feb 19 22:01:57 2008 +0100 | |
1484 | ||
1485 | ppc4xx: program_tlb now uses 64bit physical addess | |
1486 | ||
1487 | This patch changes the physical addess parameter from 32bit to 64bit. | |
1488 | This is needed for 36bit 4xx platforms to access areas located | |
1489 | beyond the 4GB border, like SoC peripherals (EBC etc.). | |
1490 | ||
1491 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1492 | ||
1493 | commit c3307fa186af85771924c434997089b8104c0a46 | |
1494 | Author: Stefan Roese <sr@denx.de> | |
1495 | Date: Tue Feb 19 21:58:25 2008 +0100 | |
1496 | ||
1497 | ppc4xx: miiphy.c reworked | |
1498 | ||
1499 | While adding the 460EX/GT support I reworked the 4xx miiphy code. It | |
1500 | badly neede some cleanup. | |
1501 | ||
1502 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1503 | ||
1504 | commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b | |
1505 | Author: Stefan Roese <sr@denx.de> | |
1506 | Date: Tue Feb 19 16:21:49 2008 +0100 | |
1507 | ||
1508 | rtc: Add M41T62 support | |
1509 | ||
1510 | This patch add support for the STM M41T62 RTC. It is used and tested | |
1511 | on the AMCC Canyonlands 406EX platform. | |
1512 | ||
1513 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1514 | ||
1515 | commit 217d383e201adc7f2271145ae345ea5eae2b7170 | |
1516 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
1517 | Date: Mon Feb 25 18:46:43 2008 +0100 | |
1518 | ||
1519 | ppc4xx: Add 405GPr based MCU25 board specific files | |
1520 | ||
1521 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
1522 | ||
1523 | commit 75a66dcdb383863ad33f0534cfc27b7a86947dad | |
1524 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
1525 | Date: Mon Feb 25 18:46:42 2008 +0100 | |
1526 | ||
1527 | ppc4xx: Add 405GPr based MCU25 board config file | |
1528 | ||
1529 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
1530 | ||
1531 | commit b05f35436b733a240559e77e46bed8439665ecc5 | |
1532 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
1533 | Date: Mon Feb 25 18:46:41 2008 +0100 | |
1534 | ||
1535 | ppc4xx: Add 405GPr based MCU25 board. Global files | |
1536 | ||
1537 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
1538 | ||
1539 | commit 14c27b35ac812a71abce6e3e2f4129d5e9313660 | |
1540 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
1541 | Date: Mon Feb 25 18:37:02 2008 +0100 | |
1542 | ||
1543 | ppc4xx: HCU4/5. remove obsolete hcu_flash.c | |
1544 | ||
1545 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
1546 | ||
1547 | commit a079494853cc2bfeddb26673219db0b4b2b31566 | |
1548 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
1549 | Date: Mon Feb 25 18:37:01 2008 +0100 | |
1550 | ||
1551 | ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY | |
1552 | ||
1553 | Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with | |
1554 | the FLASH_CFI_LEGACY et al. config options. | |
1555 | ||
1556 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
1557 | ||
1558 | commit e4170e5a50c8110f792bc37472833ae669d69951 | |
1559 | Author: Stefan Roese <sr@denx.de> | |
1560 | Date: Tue Mar 11 13:52:25 2008 +0100 | |
1561 | ||
1562 | ppc4xx: Fix comment in 405EX DDR2 init code | |
1563 | ||
1564 | Signed-off-by: Stefan Roese <sr@denx.de> | |
1565 | ||
438a4c11 WD |
1566 | commit 766529fccc860ecb9e955b4239dff69cd9e4ea09 |
1567 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
1568 | Date: Fri Mar 14 16:22:34 2008 +0100 | |
1569 | ||
1570 | Add MD5 support to the new uImage format | |
1571 | ||
1572 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
1573 | ||
1574 | commit 0ede0c383530a418cf98be9122371a86573cd0db | |
1575 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
1576 | Date: Fri Mar 14 16:22:34 2008 +0100 | |
1577 | ||
1578 | Add the MD5 algorithm | |
1579 | ||
1580 | MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then | |
1581 | calculated using the md5() function -- see include/md5.h for details. | |
1582 | ||
1583 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
1584 | ||
0b8f2a27 WD |
1585 | commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0 |
1586 | Author: Wolfgang Denk <wd@denx.de> | |
1587 | Date: Fri Mar 14 16:04:54 2008 +0100 | |
1588 | ||
1589 | tools/setlocalversion: use a git-describe-ish format | |
1590 | ||
1591 | Change the automatic local version to have the form -nnnnn-gSHA1SUMID, | |
1592 | where 'nnnnn' is the number of commits since the last tag (i.e., | |
1593 | 1.3.2-rc3). This makes it much easier to recognize "newer" versions | |
1594 | and to see how much has been changed since the referenced tag. | |
1595 | ||
1596 | Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f. | |
1597 | ||
1598 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1599 | ||
1600 | commit c6dc21c84de0f159a1752c5ebd33cff843f63609 | |
1601 | Author: Wolfgang Denk <wd@denx.de> | |
1602 | Date: Thu Mar 13 14:32:03 2008 +0100 | |
1603 | ||
1604 | HMI1001: add support for MPC5200 Rev. B processors. | |
1605 | ||
1606 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1607 | ||
1608 | commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a | |
1609 | Author: Wolfgang Denk <wd@denx.de> | |
1610 | Date: Thu Mar 13 14:29:49 2008 +0100 | |
1611 | ||
1612 | TQM5200: remove dead code | |
1613 | ||
1614 | This board never used a MGT5100 processor. | |
1615 | ||
1616 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1617 | ||
438a4c11 WD |
1618 | commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d |
1619 | Author: Marian Balakowicz <m8@semihalf.com> | |
1620 | Date: Wed Mar 12 12:14:15 2008 +0100 | |
1621 | ||
1622 | [new uImage] Fix build issue on ARM | |
1623 | ||
1624 | ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead. | |
1625 | ||
1626 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
1627 | ||
1628 | commit 3310c549a73a949430bfda90876df7552a1dab0c | |
1629 | Author: Marian Balakowicz <m8@semihalf.com> | |
1630 | Date: Wed Mar 12 12:13:13 2008 +0100 | |
1631 | ||
1632 | [new uImage] Add new uImage format documentation and examples | |
1633 | ||
1634 | Create doc/uImage.FIT documentation directory with the following files: | |
1635 | - command_syntax_extensions.txt : extended command syntax description | |
1636 | - howto.txt : short usage howto | |
1637 | - source_file_format.txt : internal new uImage format description | |
1638 | ||
1639 | Add example image source files: | |
1640 | - kernel.its | |
1641 | - kernel_fdt.its | |
1642 | - multi.its | |
1643 | ||
1644 | Update README appropriately. | |
1645 | ||
1646 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1647 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
1648 | ||
1649 | commit 1ec73761d2e247078f4520a265d463e8b73391a2 | |
1650 | Author: Marian Balakowicz <m8@semihalf.com> | |
1651 | Date: Wed Mar 12 10:35:52 2008 +0100 | |
1652 | ||
1653 | [new uImage] Fix definition of common bootm_headers_t fields | |
1654 | ||
1655 | verify, autostart and lmb fields are used regardless of CONFIG_FIT | |
1656 | setting, move their definitions to common section. | |
1657 | ||
1658 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1659 | ||
1660 | commit 1d1cb4270edc6a99276834064069717f9782c491 | |
1661 | Author: Marian Balakowicz <m8@semihalf.com> | |
1662 | Date: Wed Mar 12 10:35:51 2008 +0100 | |
1663 | ||
1664 | [new uImage] Fix build problems on trab board | |
1665 | ||
1666 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1667 | ||
1668 | commit f773bea8e11f4a11c388dcee956b2444203e6b65 | |
1669 | Author: Marian Balakowicz <m8@semihalf.com> | |
1670 | Date: Wed Mar 12 10:35:46 2008 +0100 | |
1671 | ||
1672 | [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used | |
1673 | ||
1674 | Save FIT configuration provied in the first bootm argument and use it | |
1675 | when to get ramdisk/FDT subimages when second and third (ramdisk/FDT) | |
1676 | arguments are not specified. | |
1677 | ||
1678 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1679 | ||
1680 | commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae | |
1681 | Author: Marian Balakowicz <m8@semihalf.com> | |
1682 | Date: Wed Mar 12 10:33:01 2008 +0100 | |
1683 | ||
1684 | [new uImage] More verbose kernel image uncompress error message | |
1685 | ||
1686 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1687 | ||
1688 | commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0 | |
1689 | Author: Marian Balakowicz <m8@semihalf.com> | |
1690 | Date: Wed Mar 12 10:33:01 2008 +0100 | |
1691 | ||
1692 | [new uImage] Use show_boot_progress() for new uImage format | |
1693 | ||
1694 | This patch allocates a set of show_boot_progress() IDs for new uImage format | |
1695 | and adds show_boot_progress() calls in new uImage format handling code. | |
1696 | ||
1697 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1698 | ||
1699 | commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720 | |
1700 | Author: Marian Balakowicz <m8@semihalf.com> | |
1701 | Date: Wed Mar 12 10:33:01 2008 +0100 | |
1702 | ||
1703 | [new uImage] Add new uImage fromat support to fpga command | |
1704 | ||
1705 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1706 | ||
1707 | commit 09475f7527460e426c0e0628fc5b8f3754fbaa23 | |
1708 | Author: Marian Balakowicz <m8@semihalf.com> | |
1709 | Date: Wed Mar 12 10:33:01 2008 +0100 | |
1710 | ||
1711 | [new uImage] Add new uImage format handling to other bootm related commands | |
1712 | ||
1713 | Updated commands: | |
1714 | ||
1715 | docboot - cmd_doc.c | |
1716 | fdcboot - cmd_fdc.c | |
1717 | diskboot - cmd_ide.c | |
1718 | nboot - cmd_nand.c | |
1719 | scsiboot - cmd_scsi.c | |
1720 | usbboot - cmd_usb.c | |
1721 | ||
1722 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1723 | ||
1724 | commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338 | |
1725 | Author: Marian Balakowicz <m8@semihalf.com> | |
1726 | Date: Wed Mar 12 10:33:00 2008 +0100 | |
1727 | ||
1728 | [new uImage] Add new uImage format support to imgextract command | |
1729 | ||
1730 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1731 | ||
1732 | commit 424c4abdd175d2c470510df8ce0e32d3f463ec16 | |
1733 | Author: Marian Balakowicz <m8@semihalf.com> | |
1734 | Date: Wed Mar 12 10:33:00 2008 +0100 | |
1735 | ||
1736 | [new uImage] Add new uImage format support to autoscript routine | |
1737 | ||
1738 | autoscript() routine is updated to accept second argument, which | |
1739 | is only used for FIT images and provides a FIT subimage unit name. | |
1740 | ||
1741 | autoscript() routine callers must now pass two arguments. For | |
1742 | non-interactive use (like in cmd_load.c, cmd_net.c), new environment | |
1743 | variable 'autoscript_uname' is introduced and used as a FIT | |
1744 | subimage unit name source. | |
1745 | ||
1746 | autoscript command accepts extended syntax of the addr argument: | |
1747 | addr:<subimg_uname> | |
1748 | ||
1749 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1750 | ||
1751 | commit cd7c596e9f561dbbc17b717277438aee78cde14f | |
1752 | Author: Marian Balakowicz <m8@semihalf.com> | |
1753 | Date: Wed Mar 12 10:33:00 2008 +0100 | |
1754 | ||
1755 | [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines | |
1756 | ||
1757 | This patch updates architecture specific implementations of | |
1758 | do_bootm_linux() adding new uImage format handling for | |
1759 | operations like get kernel entry point address, get kernel | |
1760 | image data start address. | |
1761 | ||
1762 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1763 | ||
1764 | commit 3dfe110149311425919e6d6a14b561b4207498f1 | |
1765 | Author: Marian Balakowicz <m8@semihalf.com> | |
1766 | Date: Wed Mar 12 10:32:59 2008 +0100 | |
1767 | ||
1768 | [new uImage] Add node offsets for FIT images listed in struct bootm_headers | |
1769 | ||
1770 | This patch adds new node offset fields to struct bootm_headers | |
1771 | and updates bootm_headers processing code to make use of them. | |
1772 | Saved node offsets allow to avoid repeating fit_image_get_node() calls. | |
1773 | ||
1774 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1775 | ||
1776 | commit bc8ed486b125452ba3bd8344f052f437329150c5 | |
1777 | Author: Marian Balakowicz <m8@semihalf.com> | |
1778 | Date: Wed Mar 12 10:32:53 2008 +0100 | |
1779 | ||
1780 | [new uImage] ppc: Add new uImage format support to FDT handling routines | |
1781 | ||
1782 | Support for new (FIT) format uImages is added to powerpc specific | |
1783 | boot_get_fdt() routine which now recognizes, sanity checks FIT image | |
1784 | and is able to access data sections of the requested component image. | |
1785 | ||
1786 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1787 | ||
1788 | commit a44a269a905f924b420020506a4d7d7eedcc0eaf | |
1789 | Author: Marian Balakowicz <m8@semihalf.com> | |
1790 | Date: Wed Mar 12 10:14:57 2008 +0100 | |
1791 | ||
1792 | [new uImage] Re-enable interrupts for non automatic booting | |
1793 | ||
1794 | Re-enable interrupts if we return from do_bootm_<os> and 'autostart' | |
1795 | environment variable is not set to 'yes'. | |
1796 | ||
1797 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1798 | ||
1799 | commit d985c8498c4e47095820da97aa722381d39172c5 | |
1800 | Author: Marian Balakowicz <m8@semihalf.com> | |
1801 | Date: Wed Mar 12 10:14:38 2008 +0100 | |
1802 | ||
1803 | [new uImage] Remove unnecessary arguments passed to ramdisk routines | |
1804 | ||
1805 | boot_get_ramdisk() and image_get_ramdisk() do not need all | |
1806 | cmdtp, flag, argc and argv arguments. Simplify routines definition. | |
1807 | ||
1808 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1809 | ||
1810 | commit c87796483bc7c2900470dc747c367f602577608d | |
1811 | Author: Marian Balakowicz <m8@semihalf.com> | |
1812 | Date: Wed Mar 12 10:12:37 2008 +0100 | |
1813 | ||
1814 | [new uImage] Add new uImage format support for ramdisk handling | |
1815 | ||
1816 | This patch updates boot_get_ramdisk() routine adding format | |
1817 | verification and handling for new (FIT) uImages. | |
1818 | ||
1819 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1820 | ||
1821 | commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e | |
1822 | Author: Marian Balakowicz <m8@semihalf.com> | |
1823 | Date: Wed Mar 12 10:01:05 2008 +0100 | |
1824 | ||
1825 | [new uImage] Add new uImage format support for kernel booting | |
1826 | ||
1827 | New format uImages are recognized by the bootm command, | |
1828 | validity of specified kernel component image is checked and | |
1829 | its data section located and used for further processing | |
1830 | (uncompress, load, etc.) | |
1831 | ||
1832 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1833 | ||
1834 | commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547 | |
1835 | Author: Marian Balakowicz <m8@semihalf.com> | |
1836 | Date: Tue Mar 11 12:35:20 2008 +0100 | |
1837 | ||
1838 | [new uImage] Add new uImage format support for imls and iminfo commands | |
1839 | ||
1840 | imls and iminfo can now recognize nad print out contents of the new (FIT) | |
1841 | format uImages. | |
1842 | ||
1843 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1844 | ||
1845 | commit 9d25438fe7d70cf35a8a293ea5e392fefc672613 | |
1846 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
1847 | Date: Tue Mar 11 12:34:47 2008 +0100 | |
1848 | ||
1849 | [new uImage] Add support for new uImage format to mkimage tool | |
1850 | ||
1851 | Support for the new uImage format (FIT) is added to mkimage tool. | |
1852 | Commandline syntax is appropriately extended: | |
1853 | ||
1854 | mkimage [-D dtc_options] -f fit-image.its fit-image | |
1855 | ||
1856 | mkimage (together with dtc) takes fit-image.its and referenced therein | |
1857 | binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the | |
1858 | final image that can be transferred to the target (e.g., via tftp) and then | |
1859 | booted using the bootm command in U-Boot. | |
1860 | ||
1861 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
1862 | ||
1863 | commit eb6175edd6c120d8b89678243e5a2be362ee8e40 | |
1864 | Author: Marian Balakowicz <m8@semihalf.com> | |
1865 | Date: Mon Mar 10 17:53:49 2008 +0100 | |
1866 | ||
1867 | [new uImage] Make node unit names const in struct bootm_headers | |
1868 | ||
1869 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1870 | ||
1871 | commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05 | |
1872 | Author: Marian Balakowicz <m8@semihalf.com> | |
1873 | Date: Fri Feb 29 21:24:06 2008 +0100 | |
1874 | ||
1875 | [new uImage] New uImage low-level API | |
1876 | ||
1877 | Add FDT-based functions for handling new format component images, | |
1878 | configurations, node operations, property get/set, etc. | |
1879 | ||
1880 | fit_ - routines handling global new format uImage operations | |
1881 | like get/set top level property, process all nodes, etc. | |
1882 | fit_image_ - routines handling component images subnodes | |
1883 | fit_conf_ - routines handling configurations node | |
1884 | ||
1885 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
1886 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
1887 | ||
0b8f2a27 WD |
1888 | commit 30f1806f60978d707b0cff2d7bf89d141fc24290 |
1889 | Author: Wolfgang Denk <wd@denx.de> | |
1890 | Date: Sun Mar 9 16:20:02 2008 +0100 | |
1891 | ||
1892 | Release v1.3.2 | |
1893 | ||
1894 | Update CHANGELOG for release. | |
1895 | ||
1896 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1897 | ||
30f1806f WD |
1898 | commit 5b464c289ba715d0979b6e1f94947bb8f1068d16 |
1899 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1900 | Date: Sun Mar 9 14:52:11 2008 +0100 | |
1901 | ||
1902 | SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings | |
1903 | ||
1904 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1905 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1906 | ||
1907 | commit db695b78515ddb88a2d4f3357c120345efbf59ec | |
1908 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1909 | Date: Sun Mar 9 10:44:01 2008 +0100 | |
1910 | ||
1911 | scb9328: Fix flash warning: type qualifiers ignored on function return type | |
1912 | ||
1913 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1914 | ||
1915 | commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4 | |
1916 | Author: Wolfgang Denk <wd@denx.de> | |
1917 | Date: Sun Mar 9 10:50:41 2008 +0100 | |
1918 | ||
1919 | esd/common/fpga.c: fix indentation. | |
1920 | ||
1921 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1922 | ||
1923 | commit cc3843e36453e2b8db65d7e56de938ba045016a0 | |
1924 | Author: Wolfgang Denk <wd@denx.de> | |
1925 | Date: Sun Mar 9 10:33:31 2008 +0100 | |
1926 | ||
1927 | common/kgdb.c: fix 'dereferencing type-punned pointer' warning | |
1928 | ||
1929 | and get rid of a couple of unneeded casts. | |
1930 | ||
1931 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1932 | ||
1933 | commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8 | |
1934 | Author: Wolfgang Denk <wd@denx.de> | |
1935 | Date: Sun Mar 9 10:09:53 2008 +0100 | |
1936 | ||
1937 | esd/common/fpga.c: fix 'assignment of read-only location' error | |
1938 | ||
1939 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1940 | ||
1941 | commit c6fe4dabac066e8758345d249032768496983a3e | |
1942 | Author: Wolfgang Denk <wd@denx.de> | |
1943 | Date: Sun Mar 9 02:13:19 2008 +0100 | |
1944 | ||
1945 | Makefile: make build silently again. | |
1946 | ||
1947 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1948 | ||
1949 | commit 76babc86576f092573599334c85ec543fdbc6015 | |
1950 | Author: Wolfgang Denk <wd@denx.de> | |
1951 | Date: Sun Mar 9 02:07:49 2008 +0100 | |
1952 | ||
1953 | m501sk: Fix out of tree building | |
1954 | ||
1955 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1956 | ||
1957 | commit 210ed2004e062fdd03f25ab4925998aa1bd08a07 | |
1958 | Author: Wolfgang Denk <wd@denx.de> | |
1959 | Date: Sun Mar 9 00:06:09 2008 +0100 | |
1960 | ||
1961 | ADS5121: fix out of tree build | |
1962 | ||
1963 | and simplify Makefile a bit. | |
1964 | ||
1965 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1966 | ||
1967 | commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93 | |
1968 | Author: Wolfgang Denk <wd@denx.de> | |
1969 | Date: Sat Mar 8 22:35:31 2008 +0100 | |
1970 | ||
1971 | Release v1.3.2 | |
1972 | ||
1973 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1974 | ||
1975 | commit 78a90f827df74520e939c794fc7413dace21c4db | |
1976 | Author: Wolfgang Denk <wd@denx.de> | |
1977 | Date: Sat Mar 8 22:35:04 2008 +0100 | |
1978 | ||
1979 | Update CHANGELOG | |
1980 | ||
1981 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
1982 | ||
78a90f82 WD |
1983 | commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f |
1984 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1985 | Date: Sat Mar 8 21:30:04 2008 +0100 | |
1986 | ||
1987 | esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type | |
1988 | ||
1989 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
1990 | ||
1991 | commit d75469d48c05795144f4b8ba76addbb4920a7bba | |
1992 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
1993 | Date: Sat Mar 8 09:25:49 2008 +0900 | |
1994 | ||
1995 | net: rtl8169: Add processing when OWNbit did't enable in rtl_recv() | |
1996 | ||
1997 | When rtl_recv() of rtl8169 is called, OWNbit of status register | |
1998 | is not enable occasionally. | |
1999 | rtl_recv() doesn't work normally when the driver doesn't do | |
2000 | appropriate processing. | |
2001 | This patch fix this problem. | |
2002 | ||
2003 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
2004 | ||
2005 | commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa | |
2006 | Author: Heiko Schocher <hs@denx.de> | |
2007 | Date: Fri Mar 7 08:15:28 2008 +0100 | |
2008 | ||
2009 | mgsuvd: update board configuration | |
2010 | ||
2011 | initialize the UPIOx controller. | |
2012 | ||
2013 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
2014 | ||
2015 | commit e492c90c26215e459aec0fdf0f8ef1fd204988f5 | |
2016 | Author: Heiko Schocher <hs@denx.de> | |
2017 | Date: Fri Mar 7 08:13:41 2008 +0100 | |
2018 | ||
2019 | mgcoge: update board configuration | |
2020 | ||
2021 | add support for the config Flash. | |
2022 | initialize the UPIOx controller. | |
2023 | ||
2024 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
2025 | ||
2026 | commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258 | |
2027 | Author: Kim Phillips <kim.phillips@freescale.com> | |
2028 | Date: Fri Mar 7 12:27:31 2008 -0600 | |
2029 | ||
2030 | mpc83xx: make dtb basename file references equal those of linux | |
2031 | ||
2032 | the dts file basenames were updated in linux - this helps avoid | |
2033 | inadvertently loading any old dtbs laying around. | |
2034 | ||
2035 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
2036 | ||
2037 | commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675 | |
2038 | Author: Kim Phillips <kim.phillips@freescale.com> | |
2039 | Date: Wed Feb 27 16:08:22 2008 -0600 | |
2040 | ||
2041 | net: uec_phy: actually increment the timeout counter | |
2042 | ||
2043 | allow u-boot to recover (and, e.g., switch to another interface) in the | |
2044 | case where a PHY does not report autonegotiation is complete within its | |
2045 | two second timeout value. | |
2046 | ||
2047 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
2048 | ||
2049 | commit 772003e43957ee0c895abed7cd82cbe72820cbb8 | |
2050 | Author: Markus Brunner <super.firetwister@googlemail.com> | |
2051 | Date: Wed Mar 5 21:38:12 2008 +0100 | |
2052 | ||
2053 | fix taihu soft spi_read | |
2054 | ||
2055 | The taihu board used gpio_read_out_bit which reads the output register and not | |
2056 | the pin state. | |
2057 | ||
2058 | Signed-off-by: Markus Brunner <super.firetwister@gmail.com> | |
2059 | ||
2060 | commit fc84a8495ac750f6b4adae81f8c4f100f65b6340 | |
2061 | Author: Stefan Roese <sr@denx.de> | |
2062 | Date: Fri Mar 7 08:01:43 2008 +0100 | |
2063 | ||
2064 | ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables | |
2065 | ||
2066 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2067 | ||
2068 | commit bd4458cb47abecabd406b1210457be96c69fc49d | |
2069 | Author: Dave Liu <r63238@freescale.com> | |
2070 | Date: Tue Mar 4 16:59:22 2008 +0800 | |
2071 | ||
2072 | 837xEMDS: Improve the system performance | |
2073 | ||
2074 | 1. Make the CSB bus pipeline depth as 4, and enable | |
2075 | the repeat mode; | |
2076 | 2. Raise the eTSEC emergency priority; | |
2077 | 3. Use the highest IP blocks clock. | |
2078 | ||
2079 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2080 | ||
2081 | commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4 | |
2082 | Author: Detlev Zundel <dzu@denx.de> | |
2083 | Date: Thu Mar 6 16:45:53 2008 +0100 | |
2084 | ||
2085 | Replace "run load; run update" with conditionalized "run load update". | |
2086 | ||
2087 | The latter version stops when "run load" fails for whatever reasons | |
2088 | rendering the combination *a lot* more secure. | |
2089 | ||
2090 | Signed-off-by: Detlev Zundel <dzu@denx.de> | |
2091 | ||
2092 | commit 6bc113886d7d316df1a4e459bec8baf027518551 | |
2093 | Author: Stefan Roese <sr@denx.de> | |
2094 | Date: Tue Mar 4 17:40:41 2008 +0100 | |
2095 | ||
2096 | net: Print error message upon net usage when no ethernet-interface is found | |
2097 | ||
2098 | This patch fixes a problem seen on PPC4xx boards, when no MAC address is | |
2099 | defined. Then no ethernet interface is available but a simple "tftp" | |
2100 | command will return without any error message which is quite confusing. | |
2101 | ||
2102 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2103 | ||
2104 | commit a30a549a3553032d809e0356306b62de0b125901 | |
2105 | Author: Jon Loeliger <jdl@freescale.com> | |
2106 | Date: Tue Mar 4 10:03:03 2008 -0600 | |
2107 | ||
2108 | Remove erroneous or extra spd.h #includers. | |
2109 | ||
2110 | Many of the spd.h #includers don't need it, | |
2111 | and wanted to have spd_sdram() declared instead. | |
2112 | Since they didn't get that, some also had open | |
2113 | coded extern declarations of it instead or as well. | |
2114 | Fix it all up by using spd_sdram.h where needed. | |
2115 | ||
2116 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
2117 | ||
2118 | commit a4475386cef14af3fd88f0518b688e755669486d | |
2119 | Author: Wolfgang Denk <wd@denx.de> | |
2120 | Date: Tue Mar 4 17:41:28 2008 +0100 | |
2121 | ||
2122 | PCS440EP: fix build problems (redundant #define) | |
2123 | ||
2124 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2125 | ||
2126 | commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9 | |
2127 | Author: Stefan Roese <sr@denx.de> | |
2128 | Date: Tue Mar 4 17:39:25 2008 +0100 | |
2129 | ||
2130 | net: Print error message upon net usage when no ethernet-interface is found | |
2131 | ||
2132 | This patch fixes a problem seen on PPC4xx boards, when no MAC address is | |
2133 | defined. Then no ethernet interface is available but a simple "tftp" | |
2134 | command will return without any error message which is quite confusing. | |
2135 | ||
2136 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2137 | ||
2138 | commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53 | |
2139 | Author: Wolfgang Denk <wd@denx.de> | |
2140 | Date: Tue Mar 4 17:38:50 2008 +0100 | |
2141 | ||
2142 | W7OLMC/W7OLMG: fix build problems (redundant #define) | |
2143 | ||
2144 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2145 | ||
2146 | commit f9301e1cda296245ba052d7b08321199c3d0af9d | |
2147 | Author: Wolfgang Denk <wd@denx.de> | |
2148 | Date: Tue Mar 4 14:58:31 2008 +0100 | |
2149 | ||
2150 | Makefile: fix problem with out-of-tree builds introduced by 5013c09f | |
2151 | ||
2152 | Commit 5013c09f (Makefile: cleanup "clean" target) introduced a | |
2153 | problem for out-of-tree builds which caused "make clean" to fail. | |
2154 | ||
2155 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2156 | ||
2157 | commit dfece9500556bed5d8244b1c15d973cec7c25bfe | |
2158 | Author: Wolfgang Denk <wd@denx.de> | |
2159 | Date: Tue Mar 4 11:58:26 2008 +0100 | |
2160 | ||
2161 | examples/Makefile: build "hello_world" on 8xx, too. | |
2162 | ||
2163 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2164 | ||
2165 | commit 74eb0222594fd23aafdf168e60e872814eea8b62 | |
2166 | Author: Mike Nuss <mike@terascala.com> | |
2167 | Date: Mon Mar 3 15:27:05 2008 -0500 | |
2168 | ||
2169 | PPC4xx (Sequoia): Fix Ethernet "remote fault" problems | |
2170 | ||
2171 | Every now and then a Sequoia board (or equivalent hardware) had | |
2172 | problems connecting to a Gigabit capable network interface. | |
2173 | ||
2174 | There were differences in the PHY setup between Linux and U-Boot. | |
2175 | ||
2176 | This patch fixes the problem. Apparently "remote fault" is being set, | |
2177 | which signals to some devices (on the other end of the cable) that a | |
2178 | fault has occurred, while other devices ignore it. I believe the RF bit | |
2179 | was causing the issue, but I removed T4 also, to match up with Linux. | |
2180 | ||
2181 | Signed-off-by: Mike Nuss <mike@terascala.com> | |
2182 | ||
2183 | commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f | |
2184 | Author: Timur Tabi <timur@freescale.com> | |
2185 | Date: Mon Mar 3 09:58:52 2008 -0600 | |
2186 | ||
2187 | fix QE firmware uploading limit | |
2188 | ||
2189 | Fix a typo in qe_upload_firmware() that prevented uploading firmware on | |
2190 | systems with more than one RISC core. | |
2191 | ||
2192 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
2193 | ||
2194 | commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a | |
2195 | Author: Bernhard Nemec <bnemec@ganssloser.com> | |
2196 | Date: Mon Mar 3 11:57:23 2008 +0000 | |
2197 | ||
2198 | Fix endianess problem in cramfs code (cramfs is always host-endian in Linux) | |
2199 | ||
2200 | Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>, | |
2201 | see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846 | |
2202 | ||
2203 | Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com> | |
2204 | ||
2205 | commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8 | |
2206 | Author: Kim B. Heino <Kim.Heino@bluegiga.com> | |
2207 | Date: Mon Mar 3 10:39:13 2008 +0200 | |
2208 | ||
2209 | fix copy from ram to dataflash | |
2210 | ||
2211 | If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash | |
2212 | routines instead of dataflash. This is because it checks "if source | |
2213 | address is not dataflash" instead of target address. | |
2214 | ||
2215 | Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com> | |
2216 | ||
2217 | commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4 | |
2218 | Author: Wolfgang Denk <wd@denx.de> | |
2219 | Date: Mon Mar 3 12:16:44 2008 +0100 | |
2220 | ||
2221 | Fix quoting problem (preboot setting) in many board config files. | |
2222 | ||
2223 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2224 | ||
2225 | commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215 | |
2226 | Author: Wolfgang Denk <wd@denx.de> | |
2227 | Date: Mon Mar 3 12:36:49 2008 +0100 | |
2228 | ||
2229 | ADS5121: Fix default environment. | |
2230 | ||
2231 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2232 | ||
2233 | commit 91c82076ae492bb1f9d9c47a481314631d32dc8e | |
2234 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2235 | Date: Sun Mar 2 16:12:31 2008 +0100 | |
2236 | ||
2237 | Makefile: Fix missing unconfig and mkconfig use | |
2238 | ||
2239 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2240 | ||
2241 | commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d | |
2242 | Author: michael <trimarchi@gandalf.sssup.it> | |
2243 | Date: Sun Mar 2 23:33:46 2008 +0100 | |
2244 | ||
2245 | Fix checking fat32 cluster size. | |
2246 | ||
2247 | This fixes the cluster size tests in the FAT32 file system. | |
2248 | The current implementation of VFAT support doesn't work if the | |
2249 | referred cluster has an offset > 16bit representation, causing | |
2250 | "fatload" and "fatls" commands etc. to fail. | |
2251 | ||
2252 | Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it> | |
2253 | ||
2254 | commit 661bad63a076a96c39c64f136915f146725af92b | |
2255 | Author: Wolfgang Denk <wd@denx.de> | |
2256 | Date: Sun Mar 2 22:57:23 2008 +0100 | |
2257 | ||
2258 | Prepare v1.3.2-rc2 release candidate | |
2259 | ||
2260 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2261 | ||
661bad63 WD |
2262 | commit 76957cb3d621bf664311908e5962e151c633c285 |
2263 | Author: Stefan Roese <sr@denx.de> | |
2264 | Date: Sat Mar 1 12:11:40 2008 +0100 | |
2265 | ||
2266 | ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1 | |
2267 | ||
2268 | The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But | |
2269 | currently 4k/2k is configured. This patch fixes this issue. | |
2270 | ||
2271 | Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out. | |
2272 | ||
2273 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2274 | ||
2275 | commit 118978c8eb43803e2794233922df4249fa278b83 | |
2276 | Author: Woodruff, Richard <r-woodruff2@ti.com> | |
2277 | Date: Fri Feb 29 17:34:35 2008 -0600 | |
2278 | ||
2279 | Fix alignment error on ARM for modules | |
2280 | ||
2281 | Fix alignment fault on ARM when running modules. With out an explicit | |
2282 | linker file gcc4.2.1 will half word align __bss_start's value. The word | |
2283 | dereference will crash hello_world. | |
2284 | ||
2285 | signed-off-by Richard Woodruff <r-woodruff2@ti.com> | |
2286 | ||
2287 | commit ce1120dd703e6f12c59e4eba9962356a0300b832 | |
2288 | Author: Dave Liu <r63238@freescale.com> | |
2289 | Date: Fri Feb 29 17:45:31 2008 +0800 | |
2290 | ||
2291 | fs: Fix ext2 read issue | |
2292 | ||
2293 | The ext2 aligned process will corrupt the key | |
2294 | data struct, the patch fix this. | |
2295 | ||
2296 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
2297 | ||
2298 | commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e | |
2299 | Author: Wolfgang Denk <wd@denx.de> | |
2300 | Date: Sun Mar 2 22:45:33 2008 +0100 | |
2301 | ||
2302 | Makefile: cleanup "clean" target | |
2303 | ||
2304 | Make sure CDPATH settings cannot interfere. | |
2305 | Update CHANGELOG. | |
2306 | ||
2307 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2308 | ||
5013c09f WD |
2309 | commit ffda586fc1373243c9794babde69500f6293a8d8 |
2310 | Author: Li Yang <leoli@freescale.com> | |
2311 | Date: Fri Feb 29 11:46:05 2008 +0800 | |
2312 | ||
2313 | add cscope build target | |
2314 | ||
2315 | Add cscope build target to generate cscope database for code browsing. | |
2316 | ||
2317 | Signed-off-by: Li Yang <leoli@freescale.com> | |
2318 | ||
2319 | commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2 | |
2320 | Author: Kim Phillips <kim.phillips@freescale.com> | |
2321 | Date: Wed Feb 27 15:06:39 2008 -0600 | |
2322 | ||
2323 | net: uec_phy: handle 88e1111 rev.B2 erratum 5.6 | |
2324 | ||
2325 | erratum 5.6 states the autoneg completion bit is functional only if the | |
2326 | autoneg bit is asserted. | |
2327 | ||
2328 | This fixes any secondarily-issued networking commands on non-gigabit | |
2329 | links on the mpc8360 mds board. | |
2330 | ||
2331 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
2332 | ||
2333 | commit 5f91db7f582ca17b1f19f10189c025696f333d2e | |
2334 | Author: John Rigby <jrigby@freescale.com> | |
2335 | Date: Tue Feb 26 09:38:14 2008 -0700 | |
2336 | ||
2337 | MPC5121e ADS PCI support take 3 | |
2338 | ||
2339 | Adds PCI support for MPC5121 | |
2340 | ||
2341 | Tested with drivers/net/rtl8139.c | |
2342 | ||
2343 | Support is conditional since PCI on old silicon does not work. | |
2344 | ||
2345 | ads5121_PCI_config turns on PCI | |
2346 | ||
2347 | In this version, condition compilation of PCI code has been moved | |
2348 | from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as | |
2349 | suggested by Jean-Christophe PLAGNIOL-VILLARD | |
2350 | ||
2351 | Signed-off-by: John Rigby <jrigby@freescale.com> | |
2352 | ||
2353 | commit 44b4dbed4133f657705b7c5193209da9978243a7 | |
2354 | Author: Anatolij Gustschin <agust@denx.de> | |
2355 | Date: Mon Feb 25 23:53:07 2008 +0100 | |
2356 | ||
2357 | Fix warnings while compilation of post/drivers/memory.c | |
2358 | ||
2359 | Fix warnings while compilation with new gcc in eldk-4.2 | |
2360 | ||
2361 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
2362 | ||
2363 | commit 4fae35a53b3e958254d6574a1cc7e10811fc6726 | |
2364 | Author: Anatolij Gustschin <agust@denx.de> | |
2365 | Date: Mon Feb 25 20:54:04 2008 +0100 | |
2366 | ||
2367 | ppc4xx: Fix problem in 4xx_enet.c driver | |
2368 | ||
2369 | U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is | |
2370 | enabled. To reproduce the problem ensure that 'ethrotate' | |
2371 | environment variable isn't set to "no" and then run | |
2372 | "tftp 200000 not_existent_file". | |
2373 | This patch tries to fix the issue. | |
2374 | ||
2375 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
2376 | ||
2377 | commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484 | |
2378 | Author: Anatolij Gustschin <agust@denx.de> | |
2379 | Date: Mon Feb 25 20:04:20 2008 +0100 | |
2380 | ||
2381 | POST: Disable cache while SPR POST | |
2382 | ||
2383 | Currently (since commit b2e2142c) u-boot crashes on | |
2384 | sequoia board while SPR test if CONFIG_4xx_DCACHE is | |
2385 | enabled. This patch disables the cache while SPR test. | |
2386 | ||
2387 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
2388 | ||
2389 | commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d | |
2390 | Author: Martin Krause <martin.krause@tqs.de> | |
2391 | Date: Mon Feb 25 17:52:40 2008 +0100 | |
2392 | ||
2393 | TQM5200: use automatic fdt memory fixup (part 2) | |
2394 | ||
2395 | Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, | |
2396 | TB5200 and TB5200_B to fixup the /memory node with the memory values | |
2397 | detected by U-Boot. | |
2398 | ||
2399 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
2400 | ||
2401 | commit 44ceec253ea941b301abf4b079d52324def69d92 | |
2402 | Author: Martin Krause <martin.krause@tqs.de> | |
2403 | Date: Mon Feb 25 15:17:05 2008 +0100 | |
2404 | ||
2405 | TQM5200: use automatic fdt memory fixup | |
2406 | ||
2407 | Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, | |
2408 | TB5200 and TB5200_B to fixup the /memory node with the memory values | |
2409 | detected by U-Boot. | |
2410 | ||
2411 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
2412 | ||
2413 | commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a | |
2414 | Author: Martin Krause <martin.krause@tqs.de> | |
2415 | Date: Mon Feb 25 13:27:52 2008 +0100 | |
2416 | ||
2417 | TQM5200: fix bug in SDRAM initialization code | |
2418 | ||
2419 | This patch fixes a bug in the SDRAM initialization code for the | |
2420 | TQM5200. The hi_addr bit is now set correctly. Without this patch | |
2421 | the hi_addr bit is always set to 1, if the second SDRAM bank is | |
2422 | not populated. | |
2423 | ||
2424 | For other MPC5200 boards a correspondig patch has already been applied | |
2425 | some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c. | |
2426 | ||
2427 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
2428 | -- | |
2429 | Forget the first patch please. I confused flash with SDRAM in | |
2430 | the comment ... | |
2431 | ||
2432 | commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1 | |
2433 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2434 | Date: Mon Feb 25 00:03:12 2008 +0100 | |
2435 | ||
2436 | mx1fs2/flash: Fix multiple compiler warnings | |
2437 | ||
2438 | "pointer targets in assignment differ in signedness" | |
2439 | ||
2440 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2441 | ||
2442 | commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2 | |
2443 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2444 | Date: Mon Feb 25 00:03:11 2008 +0100 | |
2445 | ||
2446 | arm-imx: Fix register definitions | |
2447 | ||
2448 | Sync register definitions with linux | |
2449 | ||
2450 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2451 | ||
2452 | commit c9bcf75fecc58886af77d2a571cff2eab39eab6f | |
2453 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2454 | Date: Mon Feb 25 00:03:10 2008 +0100 | |
2455 | ||
2456 | actua1/actua2/actua3: Fix multiple unused variable warnings | |
2457 | ||
2458 | - actua1: | |
2459 | actux1.c: In function 'checkboard': | |
2460 | actux1.c:92: warning: unused variable 'revision' | |
2461 | ||
2462 | - actua2: | |
2463 | actux2.c: In function 'checkboard': | |
2464 | actux2.c:100: warning: unused variable 's' | |
2465 | actux2.c:99: warning: unused variable 'revision' | |
2466 | actux2.c: In function 'reset_phy': | |
2467 | actux2.c:130: warning: unused variable 'i' | |
2468 | ||
2469 | - actua3: | |
2470 | actux3.c: In function 'checkboard': | |
2471 | actux3.c:114: warning: unused variable 'revision' | |
2472 | ||
2473 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2474 | ||
2475 | commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd | |
2476 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
2477 | Date: Sun Feb 24 11:44:29 2008 +0900 | |
2478 | ||
2479 | Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets. | |
2480 | ||
2481 | The previous patch was lacking of i386, microblaze, nios and nios2. This | |
2482 | patch tries to fix them. | |
2483 | ||
2484 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
2485 | ||
438a4c11 WD |
2486 | commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95 |
2487 | Author: Marian Balakowicz <m8@semihalf.com> | |
2488 | Date: Fri Feb 29 22:22:46 2008 +0100 | |
2489 | ||
2490 | [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt() | |
2491 | ||
2492 | Do not use global fdt blob pointer, calculate blob size from routine | |
2493 | argument blob pointer. | |
2494 | ||
2495 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2496 | ||
2497 | commit d1cc52879c8966507dad9fb575481e6d3985e64e | |
2498 | Author: David Gibson <david@gibson.dropbear.id.au> | |
2499 | Date: Tue Feb 12 00:58:31 2008 +1100 | |
2500 | ||
2501 | libfdt: Add and use a node iteration helper function. | |
2502 | ||
2503 | This patch adds an fdt_next_node() function which can be used to | |
2504 | iterate through nodes of the tree while keeping track of depth. This | |
2505 | function is used to simplify the iteration code in a lot of other | |
2506 | functions, and is also exported for use by library users. | |
2507 | ||
2508 | Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | |
2509 | ||
2510 | commit 8cf30809a82902a471866d2f07725ce3b8a22291 | |
2511 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
2512 | Date: Fri Feb 29 16:00:24 2008 +0100 | |
2513 | ||
2514 | [new uImage] Add libfdt support to mkimage | |
2515 | ||
2516 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
2517 | ||
2518 | commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9 | |
2519 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
2520 | Date: Fri Feb 29 16:00:23 2008 +0100 | |
2521 | ||
2522 | [new uImage] Add sha1.o object to mkimage binary build | |
2523 | ||
2524 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
2525 | ||
2526 | commit df6f1b895c997978f03afe04502ee76b7ba34ab9 | |
2527 | Author: Marian Balakowicz <m8@semihalf.com> | |
2528 | Date: Fri Feb 29 16:00:06 2008 +0100 | |
2529 | ||
2530 | [new uImage] Fix component handling for legacy multi component images | |
2531 | ||
2532 | Use uint32_t when accessing size table in image_multi_count() and | |
2533 | image_multi_getimg() for multi component images. | |
2534 | ||
2535 | Add missing uimage_to_cpu() endianness conversion. | |
2536 | ||
2537 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2538 | ||
2539 | commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248 | |
2540 | Author: Marian Balakowicz <m8@semihalf.com> | |
2541 | Date: Fri Feb 29 15:59:59 2008 +0100 | |
2542 | ||
2543 | [new uImage] Share common uImage code between mkimage and U-boot | |
2544 | ||
2545 | This patch adds the following common routines: | |
2546 | ||
2547 | 1) Dedicated mkimage print_header() is replaced with common | |
2548 | image_print_contents() | |
2549 | image_print_contents_noindent() | |
2550 | ||
2551 | 2) Common os/arch/type/comp fields name <--> id translation routines | |
2552 | genimg_get_os_name() | |
2553 | genimg_get_arch_name() | |
2554 | genimg_get_type_name() | |
2555 | genimg_get_comp_name() | |
2556 | genimg_get_os_id() | |
2557 | genimg_get_arch_id() | |
2558 | genimg_get_type_id() | |
2559 | genimg_get_comp_id() | |
2560 | ||
2561 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2562 | ||
2563 | commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6 | |
2564 | Author: Marian Balakowicz <m8@semihalf.com> | |
2565 | Date: Fri Feb 29 14:58:34 2008 +0100 | |
2566 | ||
2567 | [new uImage] Update naming convention for bootm/uImage related code | |
2568 | ||
2569 | This patch introduces the following prefix convention for the | |
2570 | image format handling and bootm related code: | |
2571 | ||
2572 | genimg_ - dual format shared code | |
2573 | image_ - legacy uImage format specific code | |
2574 | fit_ - new uImage format specific code | |
2575 | boot_ - booting process related code | |
2576 | ||
2577 | Related routines are renamed and a few pieces of code are moved around and | |
2578 | re-grouped. | |
2579 | ||
2580 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2581 | ||
2582 | commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276 | |
2583 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2584 | Date: Wed Feb 27 21:51:51 2008 -0600 | |
2585 | ||
2586 | [new uImage] Respect autostart setting in linux bootm | |
2587 | ||
2588 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2589 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
2590 | ||
2591 | commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb | |
2592 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2593 | Date: Wed Feb 27 21:51:50 2008 -0600 | |
2594 | ||
2595 | [new uImage] Provide ability to restrict region used for boot images | |
2596 | ||
2597 | Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way | |
2598 | to restrict what memory range is used for bootm. | |
2599 | ||
2600 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2601 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
2602 | ||
2603 | commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da | |
2604 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2605 | Date: Wed Feb 27 21:51:49 2008 -0600 | |
2606 | ||
2607 | [new uImage] Use lmb for bootm allocations | |
2608 | ||
2609 | Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd() | |
2610 | functions over to using lmb for allocation of the ramdisk, command line | |
2611 | and kernel bd info. | |
2612 | ||
2613 | Convert PPC specific fdt_relocate() to use lmb for allocation of the device | |
2614 | tree. | |
2615 | ||
2616 | Provided a weak function that board code can call to do additional | |
2617 | lmb reserves if needed. | |
2618 | ||
2619 | Also introduce the concept of bootmap_base to specify the offset in | |
2620 | physical memory that the bootmap is located at. This is used for | |
2621 | allocations of the cmdline, kernel bd, and device tree as they should | |
2622 | be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ. | |
2623 | ||
2624 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2625 | ||
2626 | commit f5614e7926863bf0225ec860d9b319741a9c4004 | |
2627 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2628 | Date: Wed Feb 27 21:51:48 2008 -0600 | |
2629 | ||
2630 | [new uImage] Add autostart flag to bootm_headers structure | |
2631 | ||
2632 | The autostart env variable was dropped as part of the initial new uImage | |
2633 | cleanup. Add it back here so the arch specific code can decide if it | |
2634 | wants to really boot or not. | |
2635 | ||
2636 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2637 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
2638 | ||
2639 | commit 4ed6552f715983bfc7d212c1199a1f796f1144ad | |
2640 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2641 | Date: Wed Feb 27 21:51:47 2008 -0600 | |
2642 | ||
2643 | [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images | |
2644 | ||
2645 | Introduce the LMB lib used on PPC in the kernel as a clean way to manage | |
2646 | the memory spaces used by various boot images and structures. This code | |
2647 | will allow us to simplify the code in bootm and its support functions. | |
2648 | ||
2649 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2650 | ||
2651 | commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904 | |
2652 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2653 | Date: Tue Feb 19 22:03:47 2008 -0600 | |
2654 | ||
2655 | [new uImage] ppc: Allow boards to specify effective amount of memory | |
2656 | ||
2657 | For historical reasons we limited the stack to 256M because some boards | |
2658 | could only map that much via BATS. However newer boards are capable of | |
2659 | mapping more memory (for example 85xx is capable of doing up to 2G). | |
2660 | ||
2661 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2662 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
2663 | ||
2664 | commit 274cea2bddbca10cdad7daa518951b75c44ef6bc | |
2665 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2666 | Date: Wed Feb 27 21:51:46 2008 -0600 | |
2667 | ||
2668 | [new uImage] rework error handling so common functions don't reset | |
2669 | ||
2670 | Changed image_get_ramdisk() to just return NULL on error and have | |
2671 | get_ramdisk() propogate that error to the caller. It's left to the | |
2672 | caller to call do_reset() if it wants to. | |
2673 | ||
2674 | Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc | |
2675 | to a common location. In the future we will change get_fdt() and | |
2676 | fdt_relocate() to return success/failure and not call do_reset() at all. | |
2677 | ||
2678 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2679 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
2680 | ||
2681 | commit d2bc095a639672def11d5d043b5688d0dbd692ec | |
2682 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2683 | Date: Wed Feb 27 21:51:45 2008 -0600 | |
2684 | ||
2685 | [new uImage] ppc: Re-order ramdisk/fdt handling sequence | |
2686 | ||
2687 | Doing the fdt before the ramdisk allows us to grow the fdt w/o concern | |
2688 | however it does mean we have to go in and fixup the initrd info since | |
2689 | we don't know where it will be. | |
2690 | ||
2691 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2692 | ||
2693 | commit 27953493ef025fb698d68c5dee39b36f01f4d530 | |
2694 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2695 | Date: Wed Feb 27 21:51:44 2008 -0600 | |
2696 | ||
2697 | [new uImage] ppc: Determine if we are booting an OF style | |
2698 | ||
2699 | If we are bootin OF style than we can skip setting up some things | |
2700 | that are used for the old boot method. | |
2701 | ||
2702 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2703 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
2704 | ||
2705 | commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb | |
2706 | Author: Kumar Gala <galak@kernel.crashing.org> | |
2707 | Date: Wed Feb 27 21:51:43 2008 -0600 | |
2708 | ||
2709 | [new uImage] Don't pass kdb to ramdisk_high since we may not have one | |
2710 | ||
2711 | We don't actually need the kdb param as we are just using it to get | |
2712 | bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we | |
2713 | boot via OF we might not actually fill out a kdb. | |
2714 | ||
2715 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2716 | Acked-by: Marian Balakowicz <m8@semihalf.com> | |
2717 | ||
2718 | commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775 | |
5013c09f WD |
2719 | Author: Kumar Gala <galak@kernel.crashing.org> |
2720 | Date: Wed Feb 27 16:30:47 2008 -0600 | |
2721 | ||
2722 | 85xx: Don't icbi when unlocking the cache | |
2723 | ||
2724 | There is no reason to icbi when invalidating the temporary stack in | |
2725 | the d-cache. Its impossible on e500 to have the i-cache contain | |
2726 | any addresses in the temp stack and it can be problematic in generating | |
2727 | transactions on the bus to non-valid addresses. | |
2728 | ||
2729 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
2730 | ||
2731 | commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6 | |
2732 | Author: Andy Fleming <afleming@freescale.com> | |
2733 | Date: Wed Feb 27 15:50:50 2008 -0600 | |
2734 | ||
2735 | Fix source for ECM error IVPR | |
2736 | ||
2737 | The source vector for the ECM was being set to 2, | |
2738 | but that's what the source vector for DDR was being | |
2739 | set to. Change it to 1. | |
2740 | ||
2741 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
2742 | ||
2743 | commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923 | |
2744 | Author: Andy Fleming <afleming@freescale.com> | |
2745 | Date: Wed Feb 27 14:29:58 2008 -0600 | |
2746 | ||
2747 | Invalidate INIT_RAM TLB mappings | |
2748 | ||
2749 | Commit 0db37dc... (and some others) changed the INIT_RAM TLB | |
2750 | mappings to be unguarded. This collided with an existing "bug" | |
2751 | where the mappings for the INIT_RAM were being kept around. | |
2752 | This meant that speculative loads to those addresses were | |
2753 | succeeding in the TLB, and going out to the bus, where they | |
2754 | were causing an exception (there's nothing at that address). The | |
2755 | Flash code was coincidentally causing such a speculative load. | |
2756 | Rather than go back to mapping the INIT RAM as guarded, we fix | |
2757 | it so that the entries for the INIT_RAM are invalidated. Thus | |
2758 | the speculative loads will fail in the TLB, and have no effect. | |
2759 | ||
2760 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
2761 | ||
2762 | commit 347b7938d3e561eb215aa386c37fb5acb5a383c6 | |
2763 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2764 | Date: Sun Feb 17 22:56:17 2008 +0100 | |
2765 | ||
2766 | sbc8548: Fix Revision reading and unused variable 'path' | |
2767 | ||
2768 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2769 | ||
2770 | commit 495d162374c472f46454453553382ad0735dc725 | |
2771 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2772 | Date: Sun Feb 17 22:56:16 2008 +0100 | |
2773 | ||
2774 | sbc8548: Fix cfi flash bank declaration | |
2775 | ||
2776 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2777 | ||
438a4c11 WD |
2778 | commit 4efbe9dbb129f857f27856936112c8c02f016be6 |
2779 | Author: Marian Balakowicz <m8@semihalf.com> | |
2780 | Date: Wed Feb 27 11:02:26 2008 +0100 | |
2781 | ||
2782 | [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled | |
2783 | ||
2784 | Dual format image code must properly handle all three FDT passing methods: | |
2785 | - raw FDT blob passed | |
2786 | - FDT blob embedded in the legacy uImage | |
2787 | - FDT blob embedded in the new uImage | |
2788 | ||
2789 | This patch enables proper raw FDT handling when no FIT imaeg support | |
2790 | is compiled in. This is a bit tricky as we must dected FIT format even | |
2791 | when FIT uImage handling is not enabled as both FIT uImages and raw FDT | |
2792 | blobs use tha same low level format (libfdt). | |
2793 | ||
2794 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2795 | ||
2796 | commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8 | |
2797 | Author: Marian Balakowicz <m8@semihalf.com> | |
2798 | Date: Wed Feb 27 11:02:26 2008 +0100 | |
2799 | ||
2800 | [new uImage] POWERPC: Add image_get_fdt() routine | |
2801 | ||
2802 | FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage | |
2803 | (3) or embedded in the new uImage. For the (2) case embedding image must be | |
2804 | verified before we get FDT from it. This patch factors out legacy image | |
2805 | specific verification routine to the separate helper routine. | |
2806 | ||
2807 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2808 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
2809 | ||
2810 | commit 1efd43601f90de21ec6c0ebb9880823e822927b1 | |
2811 | Author: Marian Balakowicz <m8@semihalf.com> | |
2812 | Date: Wed Feb 27 11:02:07 2008 +0100 | |
2813 | ||
2814 | [new uImage] Add image_get_kernel() routine | |
2815 | ||
2816 | Legacy image specific verification is factored out to a separate helper | |
2817 | routine to keep get_kernel() generic and simple. | |
2818 | ||
2819 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2820 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
2821 | ||
2822 | commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658 | |
2823 | Author: Marian Balakowicz <m8@semihalf.com> | |
2824 | Date: Wed Feb 27 11:01:04 2008 +0100 | |
2825 | ||
2826 | [new uImage] Move image verify flag to bootm_headers structure | |
2827 | ||
2828 | Do not pass image verification flag directly to related routines. | |
2829 | Simplify argument passing and move it to the bootm_header structure which | |
2830 | contains curently processed image specific data and is already being passed | |
2831 | on the argument list. | |
2832 | ||
2833 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2834 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
2835 | ||
2836 | commit 823afe7cefe00dafefc6696c1cc7aa828c394234 | |
2837 | Author: Marian Balakowicz <m8@semihalf.com> | |
2838 | Date: Wed Feb 27 11:00:47 2008 +0100 | |
2839 | ||
2840 | [Makefile] Sort COBJS in lib_<arch> Makefiles | |
2841 | ||
2842 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2843 | ||
2844 | commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91 | |
2845 | Author: Marian Balakowicz <m8@semihalf.com> | |
2846 | Date: Wed Feb 27 11:00:47 2008 +0100 | |
2847 | ||
2848 | [new uImage] Optimize gen_get_image() flow control | |
2849 | ||
2850 | When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing | |
2851 | to do, update its control flow to better reflect that simple case. | |
2852 | ||
2853 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2854 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
2855 | ||
2856 | commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca | |
2857 | Author: Marian Balakowicz <m8@semihalf.com> | |
2858 | Date: Mon Feb 4 08:28:17 2008 +0100 | |
2859 | ||
2860 | [new uImage] POWERPC: Split get_fdt() into get and relocate routines | |
2861 | ||
2862 | PPC specific FDT blob handling code is divided into two separate routines: | |
2863 | ||
2864 | get_fdt() - find and verify a FDT blob (either raw or image embedded) | |
2865 | fdt_relocate() - move FDT blob to within BOOTMAP if needed | |
2866 | ||
2867 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2868 | Acked-by: Kumar Gala <galak@kernel.crashing.org> | |
2869 | ||
5013c09f WD |
2870 | commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817 |
2871 | Author: Jon Loeliger <jdl@freescale.com> | |
2872 | Date: Mon Feb 25 13:13:37 2008 -0600 | |
2873 | ||
2874 | 86xx: Fix renamed GUR symbols in sbc8641d board. | |
2875 | ||
2876 | Back in commit a551cee99ad1d1da20fd23ad265de47448852f56 | |
2877 | (86xx: Fix GUR PCI config registers properly), we should have | |
2878 | changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL | |
2879 | symbols in the sbc8641d board as well. Fix this oversight. | |
2880 | ||
2881 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
2882 | ||
2883 | commit 64cd594e623c39f73964d18787763e4533f791f7 | |
2884 | Author: Stefan Roese <sr@denx.de> | |
2885 | Date: Mon Feb 25 16:50:48 2008 +0100 | |
2886 | ||
2887 | ppc4xx: Fix acadia_nand build problem | |
2888 | ||
2889 | Don't include testdram() on NAND-booting target acadia_nand. This saves | |
2890 | a few bytes and makes the target build clean again. | |
2891 | ||
2892 | Signed-off-by: Stefan Roese <sr@denx.de> | |
2893 | ||
2894 | commit 14e099e698d41e8179d05c2b2dbcf704a236f748 | |
2895 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2896 | Date: Sun Feb 24 23:03:12 2008 +0000 | |
2897 | ||
2898 | mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness | |
2899 | ||
2900 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2901 | ||
2902 | commit 724902c8464e610642b3a170278b99710325888e | |
2903 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2904 | Date: Sun Feb 24 23:03:11 2008 +0000 | |
2905 | ||
2906 | arm-imx: Fix registers definition | |
2907 | ||
2908 | Sync registers definition with linux | |
2909 | ||
2910 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2911 | ||
2912 | commit 4cd288b589ea1178947c6e364453c32b3dede6b7 | |
2913 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2914 | Date: Sun Feb 24 23:03:10 2008 +0000 | |
2915 | ||
2916 | actua1/actua2/actua3: Fix multipleunused variable | |
2917 | ||
2918 | - actua1: | |
2919 | actux1.c: In function 'checkboard': | |
2920 | actux1.c:92: warning: unused variable 'revision' | |
2921 | ||
2922 | - actua2: | |
2923 | actux2.c: In function 'checkboard': | |
2924 | actux2.c:100: warning: unused variable 's' | |
2925 | actux2.c:99: warning: unused variable 'revision' | |
2926 | actux2.c: In function 'reset_phy': | |
2927 | actux2.c:130: warning: unused variable 'i' | |
2928 | ||
2929 | - actua3: | |
2930 | actux3.c: In function 'checkboard': | |
2931 | actux3.c:114: warning: unused variable 'revision' | |
2932 | ||
2933 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2934 | ||
438a4c11 WD |
2935 | commit d5934ad7756f038a393a9cfab76a4fe306d9d930 |
2936 | Author: Marian Balakowicz <m8@semihalf.com> | |
2937 | Date: Mon Feb 4 08:28:09 2008 +0100 | |
2938 | ||
2939 | [new uImage] Add dual format uImage support framework | |
2940 | ||
2941 | This patch adds framework for dual format images. Format detection is added | |
2942 | and the bootm controll flow is updated to include cases for new FIT format | |
2943 | uImages. | |
2944 | ||
2945 | When the legacy (image_header based) format is detected appropriate | |
2946 | legacy specific handling is invoked. For the new (FIT based) format uImages | |
2947 | dual boot framework has a minial support, that will only print out a | |
2948 | corresponding debug messages. Implementation of the FIT specific handling will | |
2949 | be added in following patches. | |
2950 | ||
2951 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
2952 | ||
5013c09f WD |
2953 | commit b29661fc1151077776454288051bc9a488351ce8 |
2954 | Author: Wolfgang Denk <wd@denx.de> | |
2955 | Date: Sun Feb 24 15:21:36 2008 +0100 | |
2956 | ||
2957 | Coding style cleanup. Prepare v1.3.2-rc2 release candidate | |
2958 | ||
2959 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
2960 | ||
b29661fc WD |
2961 | commit 00b48a48424894daa589d166d73277830b1c6ac4 |
2962 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2963 | Date: Sat Feb 23 12:15:56 2008 +0100 | |
2964 | ||
2965 | ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected | |
2966 | ||
2967 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
2968 | ||
2969 | commit b075d74efb70ff68c49a2532f26b56d6703b69c1 | |
2970 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
2971 | Date: Sat Feb 23 17:24:16 2008 +0900 | |
2972 | ||
2973 | Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets. | |
2974 | ||
2975 | ---------------------------------------------------------------- | |
2976 | Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)] | |
2977 | ||
2978 | Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on | |
2979 | 32bit targets. | |
2980 | ||
2981 | GCC can be made to warn about usage of long long types with ISO C90 | |
2982 | (-ansi), but only with -pedantic. You can write this in a way that even | |
2983 | then it doesn't cause warnings, namely by: | |
2984 | ||
2985 | #ifdef __GNUC__ | |
2986 | __extension__ typedef __signed__ long long __s64; | |
2987 | __extension__ typedef unsigned long long __u64; | |
2988 | #endif | |
2989 | ||
2990 | The __extension__ keyword in front of this switches off any pedantic | |
2991 | warnings for this expression. | |
2992 | ||
2993 | Signed-off-by: Olaf Hering <olh@suse.de> | |
2994 | Cc: <linux-arch@vger.kernel.org> | |
2995 | Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | |
2996 | Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | |
2997 | ---------------------------------------------------------------- | |
2998 | ||
2999 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3000 | ||
3001 | commit 208acd112e6517b21fc30c420396902b103563ac | |
3002 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3003 | Date: Sat Feb 23 17:07:57 2008 +0900 | |
3004 | ||
3005 | cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate. | |
3006 | ||
3007 | This will reduce the build time. | |
3008 | ||
3009 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3010 | ||
3011 | commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4 | |
3012 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3013 | Date: Sat Feb 23 17:05:00 2008 +0900 | |
3014 | ||
3015 | cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate. | |
3016 | ||
3017 | This will reduce the build time. | |
3018 | ||
3019 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3020 | ||
3021 | commit e682ba399a1d76f09d8cc7af1e57066f1d360d91 | |
3022 | Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3023 | Date: Sat Feb 23 16:58:41 2008 +0900 | |
3024 | ||
3025 | cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate. | |
3026 | ||
3027 | This reduces the build time by ~10%. Here's the gth2_config example. | |
3028 | ||
3029 | BEFORE AFTER | |
3030 | real 0m31.441s 0m27.833s | |
3031 | user 0m24.766s 0m23.045s | |
3032 | sys 0m10.425s 0m7.468s | |
3033 | ||
3034 | Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> | |
3035 | ||
3036 | commit 02409f8cf54c7cd91981f0dfec135dbf3858090c | |
3037 | Author: Marcel Moolenaar <marcelm@juniper.net> | |
3038 | Date: Fri Feb 22 10:48:07 2008 -0800 | |
3039 | ||
3040 | make define2mk.sed work on FreeBSD | |
3041 | ||
3042 | In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link", | |
3043 | the define2mk.sed script was identified as the source of the link | |
3044 | failure on FreeBSD. The problem is that sed(1) does not always support | |
3045 | the '+' operator. It isn't on FreeBSD. The attach patch implements the | |
3046 | equivalent, using the '*' operator instead and should work everywhere. | |
3047 | ||
3048 | Signed-off-by: Marcel Moolenaar <marcelm@juniper.net> | |
3049 | ||
3050 | commit e5084af8ded58453cd07ec1af8b0f29f34122bbc | |
3051 | Author: Detlev Zundel <dzu@denx.de> | |
3052 | Date: Fri Feb 22 17:21:32 2008 +0100 | |
3053 | ||
3054 | Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter. | |
3055 | ||
3056 | The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove | |
3057 | final traces of long-deprecated "ramdisk" kernel parm") makes these | |
3058 | changes neccessary. | |
3059 | ||
3060 | Signed-off-by: Detlev Zundel <dzu@denx.de> | |
3061 | ||
3062 | commit d01b847c5cd070895c4ba178c85cd068a95cf7cd | |
3063 | Author: Larry Johnson <lrj@acm.org> | |
3064 | Date: Thu Feb 21 13:58:16 2008 -0500 | |
3065 | ||
3066 | LM75 bug fix for negative temperatures | |
3067 | ||
3068 | When the LM75 temperature sensor measures a temperature below 0 C, the | |
3069 | current driver does not perform sign extension, so the result returned is | |
3070 | 256 C too high. This patch fixes the problem. | |
3071 | ||
3072 | Signed-off-by: Larry Johnson <lrj@acm.org> | |
3073 | ||
3074 | commit 5a910c224b13e413bda41922379add6d75c32da3 | |
3075 | Author: Heiko Schocher <hs@denx.de> | |
3076 | Date: Thu Feb 21 18:33:45 2008 +0100 | |
3077 | ||
3078 | IDS8247: update MAINTAINER entry. | |
3079 | ||
3080 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
3081 | ||
3082 | commit 79eac2bfb591f2b028ec1735049dc91e4320de4a | |
3083 | Author: Heiko Schocher <hs@denx.de> | |
3084 | Date: Thu Feb 21 18:31:15 2008 +0100 | |
3085 | ||
3086 | Fix device tree for mgsuvd board. | |
3087 | ||
3088 | Rename the "scc" node in "ethernet" for the mgsuvd board. | |
3089 | ||
3090 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
3091 | ||
3092 | commit 2e721094a70a52206af2e1bf1208d9a7131f6dad | |
3093 | Author: Yuri Tikhonov <yur@emcraft.com> | |
3094 | Date: Thu Feb 21 14:23:42 2008 +0100 | |
3095 | ||
3096 | lwmon5: enable hardware watchdog | |
3097 | ||
3098 | Some boards (e.g. lwmon5) may use rather small watchdog intervals, so | |
3099 | causing it to reboot the board if U-Boot does a long busy-wait with | |
3100 | udelay(). Thus, for these boards we have to restart WD more | |
3101 | frequently. | |
3102 | ||
3103 | This patch splits the busy-wait udelay() into smaller, predefined, | |
3104 | intervals, so that the watchdog timer may be resetted with the | |
3105 | configurable (CONFIG_WD_PERIOD) interval. | |
3106 | ||
3107 | Signed-off-by: Yuri Tikhonov <yur@emcraft.com> | |
3108 | ||
3109 | commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d | |
3110 | Author: Anatolij Gustschin <agust@denx.de> | |
3111 | Date: Thu Feb 21 12:52:29 2008 +0100 | |
3112 | ||
3113 | ppc4xx: Support for ATI Radeon 9200 card on sequoia | |
3114 | ||
3115 | Adds configuration option for ATI Radeon 9200 card | |
3116 | support to sequoia config file. If CONFIG_VIDEO | |
3117 | is enabled, TEXT_BASE should be changed to 0xFFF80000. | |
3118 | ||
3119 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
3120 | ||
3121 | commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7 | |
3122 | Author: Kumar Gala <galak@kernel.crashing.org> | |
3123 | Date: Mon Feb 18 08:18:07 2008 -0600 | |
3124 | ||
3125 | Remove duplicate defines for ARRAY_SIZE | |
3126 | ||
3127 | A few duplicate of the ARRAY_SIZE macro sneaked in since we put | |
3128 | the define in common.h. | |
3129 | ||
3130 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
3131 | ||
3132 | commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a | |
3133 | Author: Kumar Gala <galak@kernel.crashing.org> | |
3134 | Date: Mon Feb 18 08:09:37 2008 -0600 | |
3135 | ||
3136 | ppc: Allow boards to specify effective amount of memory | |
3137 | ||
3138 | For historical reasons we limited the stack to 256M because some boards | |
3139 | could only map that much via BATS. However newer boards are capable of | |
3140 | mapping more memory (for example 85xx is capable of doing up to 2G). | |
3141 | ||
3142 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
3143 | ||
3144 | commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b | |
3145 | Author: Mike Frysinger <vapier@gentoo.org> | |
3146 | Date: Mon Feb 18 05:24:13 2008 -0500 | |
3147 | ||
3148 | include autoconf.mk before any other .mk files | |
3149 | ||
3150 | This bumps the autoconf.mk include step above board/cpu/arch/etc... so that | |
3151 | those .mk files can have make if statements based on the current config. | |
3152 | ||
3153 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3154 | ||
3155 | commit 16fe77752eee099b9fb61ed73460e51cc94b37ba | |
3156 | Author: Mike Frysinger <vapier@gentoo.org> | |
3157 | Date: Mon Feb 18 05:10:07 2008 -0500 | |
3158 | ||
3159 | error check autoconf.mk generation | |
3160 | ||
3161 | If any of the steps for generating autoconf.mk fail currently, they go | |
3162 | unnoticed. To fix, we can simply add 'set -e' to the long list of commands. | |
3163 | This is simpler and more robust than placing '|| exit $$?' after every line. | |
3164 | ||
3165 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3166 | ||
3167 | commit 019895a8dee71a9f00da05c03e379f45d581b0fe | |
3168 | Author: Stefano Babic <sbabic@denx.de> | |
3169 | Date: Mon Feb 18 08:03:51 2008 +0100 | |
3170 | ||
3171 | Fix bug in dependency checking | |
3172 | ||
3173 | By adding VERSION_FILE to the PHONY targets the script | |
3174 | /tools/setlocalversion is always called and version_autogenerated.h | |
3175 | is replaced only if the script find a modified source file. | |
3176 | ||
3177 | Signed-off-by: Stefano Babic <sbabic@denx.de> | |
3178 | ||
3179 | commit 98ba144ccc912eee90dd42699f023c497ce774c6 | |
3180 | Author: Kyungmin Park <kmpark@infradead.org> | |
3181 | Date: Mon Feb 18 14:35:43 2008 +0900 | |
3182 | ||
3183 | Fix GPMC CS2 memory setup at apollon | |
3184 | ||
3185 | It disables the current map first | |
3186 | ||
3187 | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> | |
3188 | ||
3189 | commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f | |
3190 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3191 | Date: Sun Feb 17 23:52:46 2008 +0100 | |
3192 | ||
3193 | uli526x: Fix multiple differ in signedness and parentheses around comparison | |
3194 | ||
3195 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3196 | ||
3197 | commit beeccf7a5dc5415c202e0132a33c58fc316c2a62 | |
3198 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3199 | Date: Sun Feb 17 16:58:04 2008 +0100 | |
3200 | ||
3201 | MIPS: Fix CFG_NO_FLASH support | |
3202 | ||
3203 | - Fix flash_init call when CFG_NO_FLASH is used | |
3204 | - Remove no more needed flash.c for qemu-mips | |
3205 | ||
3206 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3207 | ||
3208 | commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47 | |
3209 | Author: Mike Frysinger <vapier@gentoo.org> | |
3210 | Date: Sat Feb 16 02:40:18 2008 -0500 | |
3211 | ||
3212 | easylogo: clean up some more and add -r (rgb) support | |
3213 | ||
3214 | Michael Hennerich added support for outputting an image in RGB format rather | |
3215 | than forcing YUYV all the time. This makes obvious sense if the display you | |
3216 | have takes RGB input rather than YUYV. | |
3217 | ||
3218 | Rather than hack in support for options, I've converted it to use getopt and | |
3219 | cleaned up the argument parsing in the process. | |
3220 | ||
3221 | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> | |
3222 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3223 | ||
3224 | commit f65c98129ccada3f7caf97d80395a95b84e911de | |
3225 | Author: Mike Frysinger <vapier@gentoo.org> | |
3226 | Date: Sat Feb 16 02:12:37 2008 -0500 | |
3227 | ||
3228 | Makefile: add target for $(LDSCRIPT) | |
3229 | ||
3230 | If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds), | |
3231 | then change into the board directory and try and create it. This allows you | |
3232 | to generate the linker script on the fly based upon board defines (like the | |
3233 | Blackfin boards do). | |
3234 | ||
3235 | There should be no regressions due to this change as the normal case is to | |
3236 | already have a u-boot.lds file. If that's the case, then there's nothing to | |
3237 | generate, and so make will always exit. The fix here is that if the linker | |
3238 | script does not exist, the implicit rules take over and attempt to guess how | |
3239 | to generate the file. | |
3240 | ||
3241 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3242 | ||
438a4c11 WD |
3243 | commit 5583cbf736474ef754e128a54fb78632f57b48fd |
3244 | Author: Marian Balakowicz <m8@semihalf.com> | |
3245 | Date: Thu Feb 21 17:27:49 2008 +0100 | |
3246 | ||
3247 | [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds | |
3248 | ||
3249 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
3250 | ||
3251 | commit 2242f5369822bc7780db95c47985bb408ea9157b | |
3252 | Author: Marian Balakowicz <m8@semihalf.com> | |
3253 | Date: Thu Feb 21 17:27:41 2008 +0100 | |
3254 | ||
3255 | [new uImage] Rename and move print_image_hdr() routine | |
3256 | ||
3257 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
3258 | ||
3259 | commit f50433d670ec2ee9e96abac67cdc6e5e061a810d | |
3260 | Author: Marian Balakowicz <m8@semihalf.com> | |
3261 | Date: Thu Feb 21 17:20:20 2008 +0100 | |
3262 | ||
3263 | [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines | |
3264 | ||
3265 | Introducing routines for parsing new uImage format bootm arguments: | |
3266 | [<addr>]#<conf> - configuration specification | |
3267 | [<addr>]:<subimg> - subimage specification | |
3268 | ||
3269 | New format images can contain multiple subimages of the same type. For example | |
3270 | a single new format image file can contain three kernels, two ramdisks and a | |
3271 | couple of FDT blobs. Subimage and configuration specifications are extensions | |
3272 | to bootm (and other image-related commands) arguments' syntax that allow to | |
3273 | specify which particular subimage should be operated on. | |
3274 | ||
3275 | Subimage specification is used to denote a particular subimage. Configurations | |
3276 | are a bit more complex -- they are used to define a particualr booting setup, | |
3277 | for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple, | |
3278 | etc. | |
3279 | ||
3280 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
3281 | ||
3282 | commit fff888a1997ff7de9b29e24050fc4a0fd403ba16 | |
3283 | Author: Marian Balakowicz <m8@semihalf.com> | |
3284 | Date: Thu Feb 21 17:20:19 2008 +0100 | |
3285 | ||
3286 | [new uImage] Add gen_get_image() routine | |
3287 | ||
3288 | This routine assures that image (whether legacy or FIT) is not | |
3289 | in a special dataflash storage. | |
3290 | ||
3291 | If image address is a dataflash address image is moved to system RAM. | |
3292 | ||
3293 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
3294 | ||
3295 | commit 75d3e8fbd93c14d9929d024c75af2d742c76db70 | |
3296 | Author: Marian Balakowicz <m8@semihalf.com> | |
3297 | Date: Thu Feb 21 17:20:18 2008 +0100 | |
3298 | ||
3299 | [new uImage] Pull in libfdt if CONFIG_FIT is enabled | |
3300 | ||
3301 | New uImage format (Flattened Image Tree) requires libfdt | |
3302 | functionality, print out error message if CONFIG_OF_LIBFDT | |
3303 | is not defined. | |
3304 | ||
3305 | New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT). | |
3306 | This commit turns it on by default. | |
3307 | ||
3308 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
3309 | ||
b29661fc WD |
3310 | commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728 |
3311 | Author: Michael Schwingen <michael@schwingen.org> | |
3312 | Date: Mon Feb 18 23:16:35 2008 +0100 | |
3313 | ||
3314 | CFI: Do not use uninitialized cmd_reset | |
3315 | ||
3316 | Do not use uninitialized cmd_reset; issue both AMD and Intel reset | |
3317 | commands instead | |
3318 | ||
3319 | From a short test, it looks like AMD-style flash roms treat *any* unknown | |
3320 | command write as a reset, at least when in CFI Query mode, so issuing the | |
3321 | Intel reset command to AMD-style flashs seems safe (from the small sample I | |
3322 | have), plus the 3-cycle magic sequence should kick the state machine into | |
3323 | the right state even without a reset command. Since the AMD-style flashs | |
3324 | require the unlock sequence for real operation, I chose to try the AMD reset | |
3325 | command first, so that Intel flashs do no see an invalid command prior to | |
3326 | the CFI query. | |
3327 | ||
3328 | I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix, | |
3329 | plus Intel StrataFlash. | |
3330 | ||
3331 | Signed-off-by: Michael Schwingen <michael@schwingen.org> | |
3332 | Signed-off-by: Stefan Roese <sr@denx.de> | |
3333 | ||
3334 | commit e7a85f26830c9f2e78506421c2d519a2965bc7a1 | |
3335 | Author: Rafal Jaworowski <raj@semihalf.com> | |
3336 | Date: Thu Feb 21 11:56:44 2008 +0100 | |
3337 | ||
3338 | API: Add (c) and licensing notice to the public API header. | |
3339 | ||
3340 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> | |
3341 | ||
3342 | commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6 | |
3343 | Author: Yuri Tikhonov <yur@emcraft.com> | |
3344 | Date: Thu Feb 21 11:06:07 2008 +0100 | |
3345 | ||
3346 | Fix CPU POST test failure | |
3347 | ||
3348 | The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the | |
3349 | ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered | |
3350 | by it. The gcc-4.2 with its more aggressive optimization exposes this fact. | |
3351 | This patch just saves the CR value before running the test code, so allowing | |
3352 | it to do anything it wants with CR. | |
3353 | ||
3354 | Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> | |
3355 | Acked-by: Yuri Tikhonov <yur@emcraft.com> | |
3356 | -- | |
3357 | ||
3358 | commit d5908b093955415f3d340706378b991f911af671 | |
3359 | Author: Jon Loeliger <jdl@freescale.com> | |
3360 | Date: Wed Feb 20 15:26:51 2008 -0600 | |
3361 | ||
3362 | 8610HPCD: Document the flashbank selection switches. | |
3363 | ||
3364 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3365 | ||
3366 | commit a551cee99ad1d1da20fd23ad265de47448852f56 | |
3367 | Author: Jon Loeliger <jdl@freescale.com> | |
3368 | Date: Wed Feb 20 14:22:26 2008 -0600 | |
3369 | ||
3370 | 86xx: Fix GUR PCI config registers properly. | |
3371 | ||
3372 | Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where | |
3373 | I tried to "8610HPCD: Fix typos in two PCI setup registers", I | |
3374 | botched it due to not realizing that 8610 and 8641 had different | |
3375 | Global Utility Register defintions, one of which was like 85xx, | |
3376 | and the other wasn't. Correct this problem by introducing two | |
3377 | symbols, one for each 86xx SoC, but neither of which is named | |
3378 | anything like 85xx. | |
3379 | ||
3380 | My bad. Lovely Wednesday with git bisect. You know. | |
3381 | ||
3382 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3383 | ||
3384 | commit cb06eb961bdffc8728b38c242473d802e83ab2b4 | |
3385 | Author: Jon Loeliger <jdl@freescale.com> | |
3386 | Date: Wed Feb 20 12:24:11 2008 -0600 | |
3387 | ||
3388 | 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default. | |
3389 | ||
3390 | Without an actual supported video card hooked up, enabling | |
3391 | the CONFIG_VIDEO by default just makes it look broken by | |
3392 | routing all console output to the video card. Don't. | |
3393 | ||
3394 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3395 | ||
3396 | commit 4d264eff4312f230776b913edade7ceb75f1b1e0 | |
3397 | Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> | |
3398 | Date: Wed Jan 30 15:08:15 2008 -0600 | |
3399 | ||
3400 | ColdFire: Fix missing code flash size for M5485EVB | |
3401 | ||
3402 | Signed-off-by: James Mahan <kmahan@freescale.com> | |
3403 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
3404 | ||
3405 | commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d | |
3406 | Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> | |
3407 | Date: Wed Jan 30 15:04:42 2008 -0600 | |
3408 | ||
3409 | ColdFire: Fix 5282 and 5271 interrupt mask bit | |
3410 | ||
3411 | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> | |
3412 | ||
3413 | commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 | |
3414 | Author: Jon Loeliger <jdl@freescale.com> | |
3415 | Date: Tue Feb 19 12:31:08 2008 -0600 | |
3416 | ||
3417 | 8610HPCD: Fix typos in two PCI setup registers. | |
3418 | ||
3419 | The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA | |
3420 | were erroneously present as 85xx names and values, leftover from | |
3421 | the clone wars. Fix this by removing the 85xx cruft from the | |
3422 | 86xx codebase. | |
3423 | ||
3424 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3425 | ||
3426 | commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170 | |
3427 | Author: Jon Loeliger <jdl@freescale.com> | |
3428 | Date: Mon Feb 18 14:01:56 2008 -0600 | |
3429 | ||
3430 | 86xx: Convert sbc8641d to use libfdt. | |
3431 | ||
3432 | This is the proper fix for a missing closing brace in the function | |
3433 | ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com. | |
3434 | The ft_cpu_setup() function in mpc8641hpcn.c should have been | |
3435 | removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE, | |
3436 | but was missed. Only, the sbc8641d was nominally still using it. | |
3437 | It all got ripped out, and the funcality that was in ft_board_setup() | |
3438 | was refactored to remove the CPU portions into the new file | |
3439 | cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now. | |
3440 | ||
3441 | Based loosely on an original patch from joe.hamman@embeddedspecialties.com | |
3442 | ||
3443 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
3444 | ||
3445 | commit 04efddc87c50c84f85dad5c331c634a6ce830a83 | |
3446 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3447 | Date: Sun Feb 17 23:35:31 2008 +0100 | |
3448 | ||
3449 | mpc86xx: Fix unused variable 'config' and 'immap' | |
3450 | ||
3451 | and remove useless CONFIG_DDR_INTERLEAVE | |
3452 | ||
3453 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3454 | ||
3455 | commit 83d1b3876695c4f21faff2b731d9ef83f38ed208 | |
3456 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3457 | Date: Sun Feb 17 23:03:36 2008 +0100 | |
3458 | ||
3459 | mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law' | |
3460 | ||
3461 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3462 | ||
3463 | commit b6f29c84c208a091f95a10cbc9852d729659ba20 | |
3464 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3465 | Date: Sun Feb 17 14:15:31 2008 +0100 | |
3466 | ||
3467 | s3c24x0: Fix unused variable 'i' in function 'serial_init_dev' | |
3468 | ||
3469 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3470 | ||
3471 | commit 0937b8d869fdb42d6ad4fe312958639bd62c973f | |
3472 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3473 | Date: Sun Feb 17 14:15:32 2008 +0100 | |
3474 | ||
3475 | pxa: fix assignment from incompatible pointer type | |
3476 | ||
3477 | fix mmc_bread function prototype | |
3478 | ||
3479 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3480 | ||
3481 | commit 64d792063fff90b8118179b092feee09fe5cae13 | |
3482 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3483 | Date: Sun Feb 17 14:15:30 2008 +0100 | |
3484 | ||
3485 | at91cap9adk: fix implicit declaration of function 'eth_init' | |
3486 | ||
3487 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3488 | ||
3489 | commit 375c4353db8f900f7ec772e26fab116ec00f7d3a | |
3490 | Author: Wolfgang Denk <wd@denx.de> | |
3491 | Date: Sun Feb 17 15:43:44 2008 +0100 | |
3492 | ||
3493 | Remove files added by mistake, update CHANGELOG. | |
3494 | ||
3495 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3496 | ||
375c4353 WD |
3497 | commit b738654d3c84a30f2bfd9a8d7652ff20807c890c |
3498 | Author: Mike Nuss <mike@terascala.com> | |
3499 | Date: Wed Feb 6 11:10:11 2008 -0500 | |
3500 | ||
3501 | PPC440EPx: Optionally enable second I2C bus | |
3502 | ||
3503 | The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the | |
3504 | PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board | |
3505 | code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected. | |
3506 | ||
3507 | Signed-off-by: Mike Nuss <mike@terascala.com> | |
3508 | Cc: Stefan Roese <sr@denx.de> | |
3509 | ||
3510 | commit ef5b4f221c22d05770878513951745f236b5b43f | |
3511 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
3512 | Date: Tue Feb 5 10:26:44 2008 +0100 | |
3513 | ||
3514 | ppc4xx: HCU4/5. Cleanup configs | |
3515 | ||
3516 | - hcu4.h: Removed define of CONFIG_PPC405GPr | |
3517 | - Corrected phy addresses | |
3518 | - Fix boot variables | |
3519 | - Respect line length of 80 chars | |
3520 | ||
3521 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
3522 | ||
3523 | commit 74973126d1be63ac75bdc192f46234dca3a7c421 | |
3524 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
3525 | Date: Tue Feb 5 11:31:28 2008 +0100 | |
3526 | ||
3527 | ppc4xx: HCU4/5. Cleanups | |
3528 | ||
3529 | - Fix some coding style violations. | |
3530 | - Use in/out_u16/32 where appropriate. | |
3531 | - Use register names from ppc405.h. | |
3532 | - Fix trace useage for Lauterbach. | |
3533 | - Remove obsolete generation HCU2. | |
3534 | - Renamed fixed_hcu4_sdram to init_ppc405_sdram. | |
3535 | ||
3536 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
3537 | ||
3538 | commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555 | |
3539 | Author: Niklaus Giger <niklaus.giger@netstal.com> | |
3540 | Date: Tue Feb 5 10:26:41 2008 +0100 | |
3541 | ||
3542 | ppc4xx: PPC405GPr fix missing register definitions | |
3543 | ||
3544 | Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> | |
3545 | ||
3546 | commit 214398d9cb22268d9d4f7563359edca0f78297a2 | |
3547 | Author: Larry Johnson <lrj@acm.org> | |
3548 | Date: Fri Jan 18 21:49:05 2008 -0500 | |
3549 | ||
3550 | ppc4xx: Beautify configuration files for Sequoia and Korat boards | |
3551 | ||
3552 | Signed-off-by: Larry Johnson <lrj@acm.org> | |
3553 | ||
3554 | commit 30c6a241e88499f536e86d325759e29ba00ff67f | |
3555 | Author: Anatolij Gustschin <agust@denx.de> | |
3556 | Date: Fri Feb 15 20:09:01 2008 +0100 | |
3557 | ||
3558 | Wipe out assembler warnings while compiling x86 biosemu | |
3559 | ||
3560 | This patch tries to get rid of some assembler warnings about | |
3561 | changed .got2 section type while compiling x86 bios emulator | |
3562 | code. | |
3563 | ||
3564 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
3565 | ||
3566 | commit 67a4389e39ad853d65b72e2b7cad15c7e8291147 | |
3567 | Author: Wolfgang Denk <wd@denx.de> | |
3568 | Date: Fri Feb 15 00:57:09 2008 +0100 | |
3569 | ||
3570 | Prepare v1.3.2-rc1 release candidate | |
3571 | ||
67a4389e WD |
3572 | commit f33e9653c9c09868995d788511d573771c209fe5 |
3573 | Author: Anatolij Gustschin <agust@denx.de> | |
3574 | Date: Fri Feb 15 00:13:20 2008 +0100 | |
3575 | ||
3576 | Fix compile warning on lib_ppc/board.c | |
3577 | ||
3578 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
3579 | ||
3580 | commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4 | |
3581 | Author: Anatolij Gustschin <agust@denx.de> | |
3582 | Date: Thu Feb 14 18:22:04 2008 +0100 | |
3583 | ||
3584 | Add Radeon Mobility 9200 pci device id to the radeon driver | |
3585 | ||
3586 | This patch extends PCI device id table of the | |
3587 | radeon driver so that the driver will also support | |
3588 | Radeon Mobility 9200 (M9+) based boards. | |
3589 | ||
3590 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
3591 | ||
3592 | commit 1b8607e1f7143548c6062c28371449ec69588c00 | |
3593 | Author: Anatolij Gustschin <agust@denx.de> | |
3594 | Date: Thu Feb 14 18:19:50 2008 +0100 | |
3595 | ||
3596 | Extend ATI Radeon driver to support more video modes | |
3597 | ||
3598 | Adds ATI Radeon 9200 support for 1280x1024, 1024x768, | |
3599 | 800x600, 640x480 at 24, 16 and 8 bpp. | |
3600 | ||
3601 | Signed-off-by: Anatolij Gustschin <agust@denx.de> | |
3602 | ||
3603 | commit 4124382de029d361162a4b8cecc773eb8f26e2a8 | |
3604 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3605 | Date: Sun Feb 10 17:05:20 2008 +0100 | |
3606 | ||
3607 | xsengine: fix typo and few coding style | |
3608 | ||
3609 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3610 | ||
3611 | commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e | |
3612 | Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
3613 | Date: Fri Feb 8 21:25:58 2008 +0100 | |
3614 | ||
3615 | Fix wrong memory limit calculation in memory-test | |
3616 | ||
3617 | If the length of the memory address range passed to the "mtest" command is | |
3618 | not of the form 2^x - 1, not all address lines are tested. This bug is | |
3619 | inherited from the original software at | |
3620 | http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix | |
3621 | this. | |
3622 | ||
3623 | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
3624 | ||
3625 | commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db | |
3626 | Author: Wolfgang Denk <wd@denx.de> | |
3627 | Date: Fri Feb 15 00:11:39 2008 +0100 | |
3628 | ||
3629 | Coding STyle cleanup. | |
3630 | ||
3631 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3632 | ||
3633 | commit f6921e3dc331293c873ec4d109fd5517a42a90b3 | |
3634 | Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
3635 | Date: Tue Feb 5 13:30:43 2008 +0900 | |
3636 | ||
3637 | sh: Fix register address of SH7722 | |
3638 | ||
3639 | The address of SH7722 is wrong by old document. | |
3640 | This patch fixes this problem. | |
3641 | ||
3642 | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> | |
3643 | ||
3644 | commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2 | |
3645 | Author: Mike Frysinger <vapier@gentoo.org> | |
3646 | Date: Mon Feb 4 17:44:23 2008 -0500 | |
3647 | ||
3648 | only update version header as needed | |
3649 | ||
3650 | Constantly rebuilding the version header will force useless relinking, so we | |
3651 | simply need to compare the new header with the existing one before updating | |
3652 | it. | |
3653 | ||
3654 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3655 | ||
3656 | commit 208447f8e953f347425eb92c8e28d59e6d911363 | |
3657 | Author: Mike Frysinger <vapier@gentoo.org> | |
3658 | Date: Mon Jan 28 05:56:19 2008 -0500 | |
3659 | ||
3660 | Do not specify a CROSS_COMPILE default when executing size | |
3661 | ||
3662 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
3663 | ||
3664 | commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e | |
3665 | Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
3666 | Date: Wed Feb 13 11:19:19 2008 +0100 | |
3667 | ||
3668 | Fix return value of mtest when CFG_ALT_MEMTEST set | |
3669 | ||
3670 | Fix a missing return statement from a non-void function. | |
3671 | ||
3672 | Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> | |
3673 | ||
3674 | commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602 | |
3675 | Author: Timur Tabi <timur@freescale.com> | |
3676 | Date: Wed Jan 9 14:35:26 2008 -0600 | |
3677 | ||
3678 | 85xx, 86xx: Determine I2C clock frequencies and store in global_data | |
3679 | ||
3680 | Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx. | |
3681 | ||
3682 | Update the get_clocks() function in 85xx and 86xx to determine the I2C | |
3683 | clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk. | |
3684 | ||
3685 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
3686 | ||
3687 | commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08 | |
3688 | Author: Wolfgang Denk <wd@denx.de> | |
3689 | Date: Thu Feb 14 23:18:01 2008 +0100 | |
3690 | ||
3691 | TQM834x: clean up configuration | |
3692 | ||
3693 | Get board name consistent with Linux and elsewhere; | |
3694 | get rid of local network definitions etc. | |
3695 | ||
3696 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3697 | ||
3698 | commit 38cc09c55b1d7f233789052c6fc462e5377669a9 | |
3699 | Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3700 | Date: Thu Feb 14 08:02:12 2008 +0100 | |
3701 | ||
3702 | TFTP: fix search of ':' in BootFile | |
3703 | ||
3704 | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
3705 | ||
3706 | commit 0bc9efada170096c6b273f19165e32936d330d80 | |
3707 | Author: Wolfgang Denk <wd@denx.de> | |
3708 | Date: Thu Feb 14 22:46:55 2008 +0100 | |
3709 | ||
3710 | Coding style cleanup; update CHANGELOG. | |
3711 | ||
3712 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3713 | ||
0bc9efad WD |
3714 | commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b |
3715 | Author: Wolfgang Denk <wd@denx.de> | |
3716 | Date: Thu Feb 14 22:43:22 2008 +0100 | |
3717 | ||
3718 | PPC: Use r2 instead of r29 as global data pointer | |
3719 | ||
3720 | R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc | |
3721 | will refuse to use load/store multiple insns; instead, it issues a | |
3722 | list of simple load/store instructions upon function entry and exit, | |
3723 | resulting in bigger code size, which in turn makes the build for a | |
3724 | few boards fail. | |
3725 | ||
3726 | Use r2 instead. | |
3727 | ||
3728 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
3729 | ||
3730 | commit 3c234efa693bc59906c2be55c7918ecbb55392ea | |
3731 | Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> | |
3732 | Date: Wed Jan 30 09:08:49 2008 +0100 | |
3733 | ||
3734 | ARM: make the machid configurable via the environment | |
3735 | ||
3736 | If the variable "machid" exists, let do_bootm_linux use that instead | |
3737 | of bd->bi_arch_number. | |
3738 | ||
3739 |