projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| be5d72d1 WD |
1 | commit a08458303e7f9db67f296980036d3292c35cb45c |
| 2 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 3 | Date: Fri Jun 29 18:38:51 2007 +0200 | |
| 4 | ||
| 5 | atmel_mci: Fix data timeout value | |
| 6 | ||
| 7 | Calculate the data timeout based on values from the CSD instead of | |
| 8 | just using a hardcoded DTOR value. This is a backport of a similar fix | |
| 9 | in BSP 2.0, with one additional fix: the DTOCYC value is rounded up | |
| 10 | instead of down. | |
| 11 | ||
| 12 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 13 | ||
| 14 | commit 0ba8eed28b575626b17e0a7882f923b83e0d7584 | |
| 15 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 16 | Date: Mon Aug 13 17:22:31 2007 +0200 | |
| 17 | ||
| 18 | AVR32: Include <div64.h> instead of <asm/div64.h> | |
| 19 | ||
| 20 | include/asm-avr32/div64.h was recently moved to include/div64.h, but | |
| 21 | cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of | |
| 22 | the patch was merged perhaps?) | |
| 23 | ||
| 24 | This patch updates cpu/at32ap/interrupts.c so that the avr32 port | |
| 25 | compiles again. | |
| 26 | ||
| 27 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 28 | ||
| 29 | commit f0d1246ed7cb5a88522244c596d7ae7e6f161283 | |
| 30 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 31 | Date: Wed Jun 27 13:34:26 2007 +0200 | |
| 32 | ||
| 33 | atmel_mci: Use 512 byte blocksize if possible | |
| 34 | ||
| 35 | Instead of always using the largest blocksize the card supports, check | |
| 36 | if it can support smaller block sizes and use 512 bytes if possible. | |
| 37 | Most cards do support this, and other parts of u-boot seem to have | |
| 38 | trouble with block sizes different from 512 bytes. | |
| 39 | ||
| 40 | Also enable underrun/overrun protection. | |
| 41 | ||
| 42 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 43 | Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> | |
| 44 | ||
| 45 | commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b | |
| 46 | Author: Wolfgang Denk <wd@denx.de> | |
| 47 | Date: Sun Aug 12 21:34:50 2007 +0200 | |
| 48 | ||
| 49 | Update CHANGELOG | |
| 50 | ||
| 9986bc3e WD |
51 | commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a |
| 52 | Author: Wolfgang Denk <wd@denx.de> | |
| 53 | Date: Sun Aug 12 21:34:34 2007 +0200 | |
| 54 | ||
| 55 | Minor alignment of output, 2nd try. | |
| 56 | Also update CHANGELOG | |
| 57 | ||
| 58 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 59 | ||
| 60 | commit 6b309f22a724fad8418e811751a0741b893419cf | |
| 61 | Author: Wolfgang Denk <wd@denx.de> | |
| 62 | Date: Sun Aug 12 20:35:49 2007 +0200 | |
| 63 | ||
| 64 | Minor alignment of output | |
| 65 | ||
| 66 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 67 | ||
| 68 | commit 6f6d7b9c8559e241e8d232621542b8b59699b07b | |
| 69 | Author: Wolfgang Denk <wd@denx.de> | |
| 70 | Date: Sun Aug 12 18:28:18 2007 +0200 | |
| 71 | ||
| 72 | Cleanup output on ADS5121 board | |
| 73 | ||
| 74 | Signed-off-by: Wolfgang Denk | |
| 75 | ||
| 76 | commit a4d2636f2a859245ed3a401f26189da2dfda4ceb | |
| 77 | Author: Wolfgang Denk <wd@denx.de> | |
| 78 | Date: Sun Aug 12 15:11:38 2007 +0200 | |
| 79 | ||
| 80 | Adapt board configuration and fix kernel crash on MCC200 board. | |
| 81 | ||
| 82 | The update procedure was modified to turn off the USB subsystem | |
| 83 | before exit for MCC200 and TRAB. This is necessary as otherwise the | |
| 84 | USB controller continues to write periodically to system memory! | |
| 85 | ||
| 86 | MCC200-specific notes: | |
| 87 | - the patch disables the magic key check for MCC200 | |
| 88 | - the patch contains the configuration changes made | |
| 89 | for the new revision of the board. | |
| 90 | ||
| 91 | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> | |
| 92 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 93 | ||
| 94 | commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf | |
| 95 | Author: Wolfgang Denk <wd@denx.de> | |
| 96 | Date: Sun Aug 12 14:47:54 2007 +0200 | |
| 97 | ||
| 98 | Adjust default configuration of ADS5121 board. | |
| 99 | ||
| 100 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 101 | ||
| 102 | commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9 | |
| 103 | Author: Wolfgang Denk <wd@denx.de> | |
| 104 | Date: Sun Aug 12 14:27:39 2007 +0200 | |
| 105 | ||
| 106 | Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues. | |
| 107 | ||
| 108 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 109 | ||
| 110 | commit 5fe6be6208dda852c3564e384bd78d75784dea3e | |
| 111 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 112 | Date: Tue Aug 7 21:14:22 2007 -0400 | |
| 113 | ||
| 114 | Improve error print messages. | |
| 115 | ||
| 116 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 117 | ||
| 118 | commit 99dffca3b7590a16a00bc475c860b67b2a3f1462 | |
| 119 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 120 | Date: Tue Jul 17 13:57:04 2007 -0500 | |
| 121 | ||
| 122 | fdt: allow for builds that don't want env and bd_t nodes | |
| 123 | ||
| 124 | protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the | |
| 125 | area. | |
| 126 | ||
| 127 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 128 | ||
| 129 | commit 91148bf7aeba142d6f348805db7625db7da64d6f | |
| 130 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 131 | Date: Tue Jul 17 13:56:53 2007 -0500 | |
| 132 | ||
| 133 | fdt: do board setup based on fdt address specified on bootm line | |
| 134 | ||
| 135 | The last fdt patch to bootm did board setup based on the address | |
| 136 | specified by a prior fdt address command invocation. The bootm | |
| 137 | code, as its call to fdt_chosen does, should use the fdt specified | |
| 138 | by the user on the bootm command. Note this restores full | |
| 139 | functionality for the 8360's existing default boot environment | |
| 140 | values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr' | |
| 141 | before booting a kernel). | |
| 142 | ||
| 143 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 144 | ||
| 145 | commit e125a2ffc209dd34794e326c7175658253beadf3 | |
| 146 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 147 | Date: Tue Jul 10 20:40:39 2007 -0400 | |
| 148 | ||
| 149 | Call ft_board_setup() from the bootm command. | |
| 150 | ||
| 151 | In the patch titled "Create new fdt boardsetup command..." I removed the | |
| 152 | call to ft_board_setup() from the routine fdt_chosen(), but I forgot | |
| 153 | to add a direct call back into cmd_bootm.c | |
| 154 | ||
| 155 | This fixes the oversight by adding the direct call to the bootm command. | |
| 156 | ||
| 157 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 158 | ||
| 159 | commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845 | |
| 160 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 161 | Date: Mon Jun 25 23:25:28 2007 -0400 | |
| 162 | ||
| 163 | Create new fdt boardsetup command, fix bug parsing [] form of set values. | |
| 164 | ||
| 165 | Previously ft_board_setup() was called by fdt_chosen() which was not | |
| 166 | really correctly structured. This splits ft_board_setup() out by creating | |
| 167 | a new fdt boardsetup command. | |
| 168 | ||
| 169 | Fix a bug when parsing fdt set command values which have the square | |
| 170 | bracket form [00 11 22 33] - the length was updated incorrectly in when | |
| 171 | parsing that form. | |
| 172 | ||
| 173 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 174 | ||
| 175 | commit 6f35ded9e85493595e0eb66a82b502a95326d049 | |
| 176 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 177 | Date: Mon Jun 25 20:55:58 2007 -0400 | |
| 178 | ||
| 179 | Tighten up the error messages. | |
| 180 | ||
| 181 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 182 | ||
| 183 | commit c45874b05aae897a6c29d1a97d4bb708fca2756c | |
| 184 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 185 | Date: Mon Jun 25 19:52:23 2007 -0400 | |
| 186 | ||
| 187 | Asthetic improvements: error messages and line lengths. | |
| 188 | ||
| 189 | Tighten up the error messages, split overlength lines. | |
| 190 | ||
| 191 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 192 | ||
| 193 | commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1 | |
| 194 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 195 | Date: Fri May 25 22:08:57 2007 -0400 | |
| 196 | ||
| 197 | Fix fdt_chosen() to call ft_board_setup(), clean up long lines. | |
| 198 | ||
| 199 | The fdt_chosen() function was adding/seting some properties ad-hoc | |
| 200 | improperly and duplicated (poorly) what was done in ft_board_setup() | |
| 201 | ||
| 202 | Clean up long lines (setting properties, printing errors). | |
| 203 | ||
| 204 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 205 | ||
| 206 | commit 06e19a07701c968f15d72c083b5872a1a11c7b01 | |
| 207 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 208 | Date: Mon May 21 23:27:16 2007 -0400 | |
| 209 | ||
| 210 | For fdt_find_node_by_path(), handle the root path properly. | |
| 211 | ||
| 212 | Also removes the special case root path detection in cmd_fdt.c since it | |
| 213 | is no longer necessary. | |
| 214 | ||
| 215 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 216 | ||
| 217 | commit 9675ee7208ab965d13ea8d8262d77ac4160ef549 | |
| 218 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 219 | Date: Thu May 17 23:54:36 2007 -0400 | |
| 220 | ||
| 221 | Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT | |
| 222 | ||
| 223 | Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> | |
| 224 | Acked-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 225 | ||
| 226 | commit 1a861169bc3758f9de3aead62b058736c6891246 | |
| 227 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 228 | Date: Wed Jun 6 22:47:58 2007 -0400 | |
| 229 | ||
| 230 | Replace fdt_node_offset() with fdt_find_node_by_path(). | |
| 231 | ||
| 232 | The new name matches more closely the kernel's name, which is also | |
| 233 | a much better description. | |
| 234 | ||
| 235 | Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> | |
| 236 | Acked-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 237 | ||
| 238 | commit addd8ce83078c25f0eca5f23adbdfc64ca50a243 | |
| 239 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 240 | Date: Wed May 16 22:39:59 2007 -0400 | |
| 241 | ||
| 242 | Fix cmd_fdt line lengths, refactor code. | |
| 243 | ||
| 244 | Break lines that were greater than 80 characters in length. | |
| 245 | Move the fdt print and property parsing code to separate static functions | |
| 246 | to reduce coding clutter in the fdt_cmd handling body. | |
| 247 | ||
| 248 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 249 | ||
| 250 | commit 25114033ab21788810c48ba4df103b649da1223b | |
| 251 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 252 | Date: Sat May 12 09:47:25 2007 -0400 | |
| 253 | ||
| 254 | FDT command improvements. | |
| 255 | ||
| 256 | Fix "fdt set" so that it will create a non-existing property. | |
| 257 | Add "fdt mknode" to create nodes. | |
| 258 | ||
| 259 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 260 | ||
| 261 | commit 38eb508e8e811e2e57628f445de3a24a23c7d804 | |
| 262 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 263 | Date: Sat May 12 09:45:46 2007 -0400 | |
| 264 | ||
| 265 | Reorganize and fix problems (returns) in the bootm command. | |
| 266 | ||
| 267 | Do *NOT* return after the "point of no return" has been passed. | |
| 268 | If something goes wrong, the board must be reset after that point. | |
| 269 | Move the "Transferring control to Linux" debug message back to where it | |
| 270 | belongs: just before transferring control to linux. | |
| 271 | ||
| 272 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 273 | ||
| 274 | commit 89c8757d8f213c47709bdc4efe0695263a6080a6 | |
| 275 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 276 | Date: Tue May 8 21:27:35 2007 -0400 | |
| 277 | ||
| 278 | Fix bugs in the CONFIG_OF_LIBFDT | |
| 279 | ||
| 280 | Stupid coding mistakes (identified by Timur Tabi, thanks). | |
| 281 | ||
| 282 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 283 | ||
| 284 | commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec | |
| 285 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 286 | Date: Wed Apr 25 22:47:15 2007 -0400 | |
| 287 | ||
| 288 | Improve fdt move length handling. | |
| 289 | ||
| 290 | Make the length parameter optional: if not specified, do the move using | |
| 291 | the current size unchanged. | |
| 292 | ||
| 293 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 294 | ||
| 295 | commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d | |
| 296 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 297 | Date: Wed Apr 25 22:23:36 2007 -0400 | |
| 298 | ||
| 299 | Minor code clean up. | |
| 300 | ||
| 301 | Declare the variable fdt properly as extern. | |
| 302 | Call the "set_fn" function pointer the "short way" without the full | |
| 303 | dereferencing syntax. | |
| 304 | ||
| 305 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 306 | ||
| 307 | commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6 | |
| 308 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 309 | Date: Wed Apr 25 21:24:27 2007 -0400 | |
| 310 | ||
| 311 | Improve error messages, more informative. | |
| 312 | ||
| 313 | Print more than the raw libfdt error message strings. This is especially | |
| 314 | useful for cluing in the user when the bootm command aborts due to | |
| 315 | blob problems. | |
| 316 | ||
| 317 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 318 | ||
| 319 | commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4 | |
| 320 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 321 | Date: Fri Apr 20 22:46:53 2007 -0400 | |
| 322 | ||
| 323 | libfdt: Conditionally compile based on CONFIG_OF_LIBFDT | |
| 324 | ||
| 325 | This is the way u-boot reduces configured-out code. At Wolfgang | |
| 326 | Grandegger and Wolfgang Denk's request, make libfdt conform. | |
| 327 | ||
| 328 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 329 | ||
| 330 | commit 923efd286411ed052d9e074f59f8986d6081061c | |
| 331 | Author: Bruce Adler <bruce.adler@ccpu.com> | |
| 332 | Date: Fri Aug 10 14:54:47 2007 -0700 | |
| 333 | ||
| 334 | add image size and descriptors for Spartan 3E FPGA chips | |
| 335 | ||
| 336 | Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1) | |
| 337 | ||
| 338 | Signed-off by: Bruce Adler <bruce.adler@ccpu.com> | |
| 339 | ||
| 340 | commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70 | |
| 341 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 342 | Date: Fri Aug 10 15:34:48 2007 -0500 | |
| 343 | ||
| 344 | make MAKEALL more immune to merge conflicts | |
| 345 | ||
| 346 | ..by placing board entries one per line, as suggested by jdl. | |
| 347 | ||
| 348 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 349 | ||
| 350 | commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f | |
| 351 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 352 | Date: Fri Aug 10 13:28:25 2007 -0500 | |
| 353 | ||
| 354 | README: Remove outdated cpu type, board type, and NAME_config lists | |
| 355 | ||
| 356 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 357 | ||
| 358 | commit 49bb59912d21aacb507eb81fd21fb7af650c706c | |
| 359 | Author: Dave Liu <r63238@freescale.com> | |
| 360 | Date: Fri Aug 10 15:48:59 2007 +0800 | |
| 361 | ||
| 362 | mpc83xx: Suppress the warning 'burstlen' | |
| 363 | ||
| 364 | suppress the warning 'burstlen' of spd_sdram. | |
| 365 | ||
| 366 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 367 | ||
| 368 | commit c2c0ab4aff86622b837a48a0e560351f9afafb95 | |
| 369 | Author: Stefan Roese <sr@denx.de> | |
| 370 | Date: Fri Aug 10 20:34:58 2007 +0200 | |
| 371 | ||
| 372 | Conding style cleanup | |
| 373 | ||
| 374 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 375 | ||
| 376 | commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e | |
| 377 | Author: Sergey Kubushyn <ksi@koi8.net> | |
| 378 | Date: Fri Aug 10 20:26:18 2007 +0200 | |
| 379 | ||
| 380 | [ARM] TI DaVinci support, hopefully final | |
| 381 | ||
| 382 | Add support for the following DaVinci boards: | |
| 383 | - DV_EVM | |
| 384 | - SCHMOOGIE | |
| 385 | - SONATA | |
| 386 | ||
| 387 | Changes: | |
| 388 | ||
| 389 | - Split into separate board directories | |
| 390 | - Removed changes to MTD_DEBUG (or whatever it's called) | |
| 391 | - New CONFIG_CMD party line followed | |
| 392 | - Some cosmetic fixes, cleanup etc. | |
| 393 | - Patches against the latest U-Boot tree as of now. | |
| 394 | - Fixed CONFIG_CMD_NET in net files. | |
| 395 | - Fixed CONFIG_CMD_EEPROM for schmoogie. | |
| 396 | - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and | |
| 397 | DV_EVM. Can't check if it works on SONATA, don't have a board any more, | |
| 398 | but it at least compiles. | |
| 399 | ||
| 400 | Here is an excerpt from session log on SCHMOOGIE... | |
| 401 | ||
| 402 | U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) | |
| 403 | ||
| 404 | DRAM: 128 MB | |
| 405 | NAND: 128 MiB | |
| 406 | In: serial | |
| 407 | Out: serial | |
| 408 | Err: serial | |
| 409 | ARM Clock : 297MHz | |
| 410 | DDR Clock : 162MHz | |
| 411 | ETH PHY : DP83848 @ 0x01 | |
| 412 | U-Boot > iprobe | |
| 413 | Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F | |
| 414 | U-Boot > ping 192.168.253.10 | |
| 415 | host 192.168.253.10 is alive | |
| 416 | U-Boot > | |
| 417 | ||
| 418 | Signed-off-by: Sergey Kubushyn <ksi@koi8.net> | |
| 419 | Acked-by: Dirk Behme <dirk.behme@gmail.com> | |
| 420 | Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> | |
| 421 | Acked-by: Stefan Roese <sr@denx.de> | |
| 422 | ||
| 423 | commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f | |
| 424 | Author: Dirk Behme <dirk.behme@googlemail.com> | |
| 425 | Date: Thu Aug 2 17:42:08 2007 +0200 | |
| 426 | ||
| 427 | Make use of generic 64bit division in nand_util.c | |
| 428 | ||
| 429 | Use generic 64bit division in nand_util.c. This makes nand_util.c | |
| 430 | independent of any toolchain 64bit division. | |
| 431 | ||
| 432 | Signed-off-by: Dirk Behme <dirk.behme@gmail.com> | |
| 433 | ||
| 434 | commit f7c086e94e8ce9aad7268af97f73aa6884686f27 | |
| 435 | Author: Dirk Behme <dirk.behme@googlemail.com> | |
| 436 | Date: Thu Aug 2 17:41:14 2007 +0200 | |
| 437 | ||
| 438 | Move 64bit division from avr32 to generic lib | |
| 439 | ||
| 440 | Move the 64bit division from lib_avr32 to lib_generic. With this, all | |
| 441 | boards can do_div/__div64_32 if needed, not only avr one. Code is put | |
| 442 | to lib_generic, so no larger memory footprint if not used. No code | |
| 443 | modifications. Thanks for proposal by Håvard Skinnemoen. | |
| 444 | ||
| 445 | Signed-off-by: Dirk Behme <dirk.behme@gmail.com> | |
| 446 | ||
| 447 | commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f | |
| 448 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 449 | Date: Mon Aug 6 18:18:34 2007 -0500 | |
| 450 | ||
| 451 | mpc83xx: fix ITX[GP] O=builddir builds | |
| 452 | ||
| 453 | make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop. | |
| 454 | ||
| 455 | Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or | |
| 456 | "BUILD_DIR=<some dir> ./MAKEALL ..." | |
| 457 | ||
| 458 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 459 | ||
| 460 | commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3 | |
| 461 | Author: Dave Liu <r63238@freescale.com> | |
| 462 | Date: Wed Aug 1 15:00:59 2007 +0800 | |
| 463 | ||
| 464 | mpc83xx: Correct the README for DDR ECC | |
| 465 | ||
| 466 | Update the README for DDR ECC, change the name | |
| 467 | to README.mpc83xx.ddrecc. | |
| 468 | ||
| 469 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 470 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 471 | ||
| 472 | commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 | |
| 473 | Author: Dave Liu <r63238@freescale.com> | |
| 474 | Date: Wed Aug 1 15:00:15 2007 +0800 | |
| 475 | ||
| 476 | mpc83xx: Consolidate the ECC support of 83xx | |
| 477 | ||
| 478 | Remove the duplicated source code of ecc command on the <board>.c, | |
| 479 | for reused, move these code to cpu/mpc83xx directory. | |
| 480 | ||
| 481 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 482 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 483 | ||
| 484 | commit 036575c544cf1b69654d8fb334bda69c6ff3da36 | |
| 485 | Author: Dave Liu <r63238@freescale.com> | |
| 486 | Date: Sat Aug 4 13:37:39 2007 +0800 | |
| 487 | ||
| 488 | mpc83xx: Correct the burst length for DDR2 with 32 bits | |
| 489 | ||
| 490 | The burst length should be 4 for DDR2 with 32 bits bus | |
| 491 | ||
| 492 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 493 | ||
| 494 | commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed | |
| 495 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 496 | Date: Wed Jul 25 19:25:33 2007 -0500 | |
| 497 | ||
| 498 | mpc83xx: add support for the MPC8323E RDB | |
| 499 | ||
| 500 | MPC8323E based board with 64MB fixed SDRAM, 16MB flash, | |
| 501 | five 10/100 ethernet ports connected via an ICPlus IP175C | |
| 502 | switch, one PCI slot, and serial. Features not supported | |
| 503 | in this patch are SD card interface, 2 USB ports, and the | |
| 504 | two phone ports. | |
| 505 | ||
| 506 | Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> | |
| 507 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 508 | ||
| 509 | commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359 | |
| 510 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 511 | Date: Wed Jul 25 19:25:28 2007 -0500 | |
| 512 | ||
| 513 | mpc83xx: fixup generic pci for libfdt | |
| 514 | ||
| 515 | add libfdt support to the generic 83xx pci code | |
| 516 | ||
| 517 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 518 | ||
| 519 | commit f57ac7a7b37109245b69db80839ebee26179966a | |
| 520 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 521 | Date: Wed Jul 25 19:25:22 2007 -0500 | |
| 522 | ||
| 523 | mpc83xx: fix 8360 and cpu functions to update fdt being passed | |
| 524 | ||
| 525 | ..and not the global fdt. Rename local fdt vars to blob so as not to | |
| 526 | be confused with the global var with the same three-letter name. | |
| 527 | ||
| 528 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 529 | ||
| 530 | commit 8be404459a6b7395415a57bb35e8377e3b2b5acb | |
| 531 | Author: Jerry Van Baren <gvb.uboot@gmail.com> | |
| 532 | Date: Wed Jul 4 21:34:24 2007 -0400 | |
| 533 | ||
| 534 | mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled | |
| 535 | ||
| 536 | Several node strings were not correct (trailing slashes and properties | |
| 537 | in the strings) | |
| 538 | Added setting of the timebase-frequency. | |
| 539 | Improved error messages and use debug() instead of printf(). | |
| 540 | ||
| 541 | Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 542 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 543 | ||
| 544 | commit 26d02c9bbac1751c5e19294f000100b48d43a920 | |
| 545 | Author: Jerry Van Baren <gvb.uboot@gmail.com> | |
| 546 | Date: Wed Jul 4 21:27:30 2007 -0400 | |
| 547 | ||
| 548 | mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path(). | |
| 549 | ||
| 550 | The new name matches more closely the kernel's name, which is also | |
| 551 | a much better description. | |
| 552 | ||
| 553 | These are the mpc83xx changes made necessary by the function name change. | |
| 554 | ||
| 555 | Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> | |
| 556 | Acked-by: Gerald Van Baren <vanbaren@cideas.com> | |
| 557 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 558 | ||
| 559 | commit 9be39a67c9f8fef7107f5df09d673005f04d0963 | |
| 560 | Author: Dave Liu <daveliu@freescale.com> | |
| 561 | Date: Mon Jun 25 10:41:56 2007 +0800 | |
| 562 | ||
| 563 | mpc83xx: Add support for the display of reset status | |
| 564 | ||
| 565 | 83xx processor family has many reset sources, such as | |
| 566 | power on reset, software hard reset, software soft reset, | |
| 567 | JTAG, bus monitor, software watchdog, check stop reset, | |
| 568 | external hard reset, external software reset. | |
| 569 | sometimes, to figure out the fault of system, we need to | |
| 570 | know the cause of reset early before the prompt of | |
| 571 | u-boot present. | |
| 572 | ||
| 573 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 574 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 575 | ||
| 576 | commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d | |
| 577 | Author: Dave Liu <daveliu@freescale.com> | |
| 578 | Date: Mon Jun 25 10:41:04 2007 +0800 | |
| 579 | ||
| 580 | mpc83xx: Fix the align bug of SDMA buffer | |
| 581 | ||
| 582 | According to the latest user manual, the SDMA temporary | |
| 583 | buffer base address must be 4KB aligned. | |
| 584 | ||
| 585 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 586 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 587 | ||
| 588 | commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476 | |
| 589 | Author: Dave Liu <daveliu@freescale.com> | |
| 590 | Date: Mon Jun 25 13:21:12 2007 +0800 | |
| 591 | ||
| 592 | mpc83xx: Revise the MPC8360EMDS readme doc | |
| 593 | ||
| 594 | When the rev2.x silicon mount on the MPC8360EMDS baord, | |
| 595 | and if you are using the u-boot version after the commit | |
| 596 | 3fc0bd159103b536e1c54c6f4457a09b3aba66ca. | |
| 597 | to make the ethernet interface usable, we have to setup | |
| 598 | the jumpers correctly. | |
| 599 | ||
| 600 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 601 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 602 | ||
| 603 | commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c | |
| 604 | Author: Timur Tabi <timur@freescale.com> | |
| 605 | Date: Tue Jul 3 13:46:32 2007 -0500 | |
| 606 | ||
| 607 | FSL I2C driver programs the two I2C busses differently | |
| 608 | ||
| 609 | The i2c_init() function in fsl_i2c.c programs the two I2C busses differently. | |
| 610 | The second I2C bus has its slave address programmed incorrectly and is | |
| 611 | missing a 5-us delay. | |
| 612 | ||
| 613 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 614 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 615 | ||
| 616 | commit df33f6b4d6d63693dd9200808b242de1b86cb8e8 | |
| 617 | Author: Timur Tabi <timur@freescale.com> | |
| 618 | Date: Tue Jul 3 13:04:34 2007 -0500 | |
| 619 | ||
| 620 | Update SCCR programming in cpu_init_f() to support all 83xx processors | |
| 621 | ||
| 622 | Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the | |
| 623 | bitfields for all 83xx processors. The code to update some bitfields was | |
| 624 | compiled only on some processors. Now, the bitfields are programmed as long | |
| 625 | as the corresponding CFG_SCCR option is defined in the board header file. | |
| 626 | This means that the board header file should not define any CFG_SCCR macros | |
| 627 | for bitfields that don't exist on that processor, otherwise the SCCR will be | |
| 628 | programmed incorrectly. | |
| 629 | ||
| 630 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 631 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 632 | ||
| 633 | commit 9546266999f0b9b51372636614211b88d90f0f25 | |
| 634 | Author: Martin Krause <martin.krause@tqs.de> | |
| 635 | Date: Fri Jun 22 13:04:22 2007 +0200 | |
| 636 | ||
| 637 | TQM834x: cleanup configuraton | |
| 638 | ||
| 639 | Remove irritating #undef DEBUG | |
| 640 | ||
| 641 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
| 642 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 643 | ||
| 644 | commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc | |
| 645 | Author: david.saada <David.Saada@ecitele.com> | |
| 646 | Date: Mon Jun 18 09:09:53 2007 -0700 | |
| 647 | ||
| 648 | MPC83xx: Fix makefile to generate config.h file in the build directory | |
| 649 | ||
| 650 | MPC83xx: Fix the Makefile config sections to generate the include/config.h | |
| 651 | file in the build directory instead of the source directory. | |
| 652 | ||
| 653 | Signed-off-by: David Saada <david.saada@ecitele.com> | |
| 654 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 655 | ||
| 656 | commit 1ded0242e437259366792d52b7e9d1e1931d8fa5 | |
| 657 | Author: Lee Nipper <Lee.Nipper@freescale.com> | |
| 658 | Date: Thu Jun 14 20:07:33 2007 -0500 | |
| 659 | ||
| 660 | mpc83xx: Add support for 8360 silicon revision 2.1 | |
| 661 | ||
| 662 | This change adds 8360 silicon revision 2.1 support to u-boot. | |
| 663 | ||
| 664 | Signed-off-by: Lee Nipper <lee.nipper@freescale.com> | |
| 665 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 666 | ||
| 667 | commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4 | |
| 668 | Author: Kumar Gala <galak@kernel.crashing.org> | |
| 669 | Date: Wed Aug 8 04:14:28 2007 -0500 | |
| 670 | ||
| 671 | Treat ppc64 host as ppc | |
| 672 | ||
| 673 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
| 674 | ||
| 675 | commit 0dc4279b08ff82472bec2e2c90858602459febe8 | |
| 676 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 677 | Date: Wed Aug 8 09:01:46 2007 +0800 | |
| 678 | ||
| 679 | Minor fix for bios emulator makefile | |
| 680 | ||
| 681 | Add $(obj) to LIB avoiding objects be built in the source dir | |
| 682 | ||
| 683 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> | |
| 684 | ||
| 685 | commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6 | |
| 686 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 687 | Date: Wed Aug 8 08:33:11 2007 +0800 | |
| 688 | ||
| 689 | Add CONFIG_BIOSEMU define to guard all the bios emulator code | |
| 690 | ||
| 691 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> | |
| 692 | ||
| 693 | This patch fix the compile issue on the board that did not enable the bios emulator | |
| 694 | ||
| 695 | commit ed8106433522f2ea8933e9808346860d061d7731 | |
| 696 | Author: Zach Sadecki <Zach.Sadecki@ripcode.com> | |
| 697 | Date: Tue Jul 31 12:27:25 2007 -0500 | |
| 698 | ||
| 699 | tsec: fix multiple PHY support | |
| 700 | ||
| 701 | The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx" | |
| 702 | broke multiple PHY support in tsec.c. This fixes it. | |
| 703 | ||
| 704 | Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com> | |
| 705 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 706 | ||
| 707 | commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede | |
| 708 | Author: Joe Hamman <joe.hamman@embeddedspecialties.com> | |
| 709 | Date: Thu Aug 9 09:08:18 2007 -0500 | |
| 710 | ||
| 711 | tsec: Allow Ten Bit Interface address to be configurable | |
| 712 | ||
| 713 | Allow the address of the Ten Bit Interface (TBI) to be changed in the | |
| 714 | event of a conflict with another device. | |
| 715 | ||
| 716 | Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> | |
| 717 | ||
| 718 | commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c | |
| 719 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 720 | Date: Tue Aug 7 16:17:06 2007 +0800 | |
| 721 | ||
| 722 | Add CONFIG_BIOSEMU define to guard all the bios emulator code | |
| 723 | ||
| 724 | This patch fix the compile issue on the board that did not enable the bios emulator | |
| 725 | ||
| 726 | commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053 | |
| 727 | Author: Wolfgang Denk <wd@denx.de> | |
| 728 | Date: Tue Aug 7 16:02:13 2007 +0200 | |
| 729 | ||
| 730 | Fix missing brace error in fs/fat/fat.c | |
| 731 | [pointed out by Roderik Wildenburg] | |
| 732 | ||
| 733 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 734 | ||
| 735 | commit 6c33c78557ca6f8da68c01ce33e278695197d3f4 | |
| 736 | Author: Wolfgang Denk <wd@denx.de> | |
| 737 | Date: Mon Aug 6 23:21:05 2007 +0200 | |
| 738 | ||
| 739 | Fixed typo in README (pointed out by Martin Jost). | |
| 740 | ||
| 741 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 742 | ||
| 743 | commit 9c7e4b06214db61bb21f1bcbe57c97519669baae | |
| 744 | Author: Wolfgang Denk <wd@denx.de> | |
| 745 | Date: Mon Aug 6 02:17:36 2007 +0200 | |
| 746 | ||
| 747 | Coding style cleanup. Update CHANGELOG. | |
| 748 | ||
| 749 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 750 | ||
| 751 | commit 221838cc7eb178370ff62aa05920a582e12ac322 | |
| 752 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 753 | Date: Tue Jul 10 09:03:22 2007 +0800 | |
| 754 | ||
| 755 | Remove the bios emulator from MAI board. | |
| 756 | ||
| 757 | The bios emulator in the MAI board can not pass compile | |
| 758 | and have a lot of crap in it. remove it and will have a | |
| 759 | clean and small bios emulator in the drivers directory | |
| 760 | which can be uesed for every board. | |
| 761 | ||
| 762 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> | |
| 763 | ||
| 764 | commit 5618332409bb96f4448d1712899369fc80c0b489 | |
| 765 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 766 | Date: Fri Jul 13 12:14:59 2007 +0800 | |
| 767 | ||
| 768 | Fix some compile issues for MAI board. | |
| 769 | ||
| 770 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> | |
| 771 | ||
| 772 | commit 0f460a1ee148b648ee242c3157650287d4296260 | |
| 773 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 774 | Date: Fri Jul 13 12:14:58 2007 +0800 | |
| 775 | ||
| 776 | Configurations for ATI video card BIOS emulator | |
| 777 | ||
| 778 | This patch add definition of the BIOS emulator and the ATI framebuffer | |
| 779 | driver for MPC8641HPCN board. | |
| 780 | ||
| 781 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> | |
| 782 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> | |
| 783 | ||
| 784 | commit ece92f85053b8df613edcf05b26a416cbc3d629c | |
| 785 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 786 | Date: Fri Jul 6 08:34:56 2007 +0800 | |
| 787 | ||
| 788 | This is a BIOS emulator, porting from SciTech for u-boot, mainly for | |
| 789 | ATI video card BIOS. and can be used for x86 code emulation by some | |
| 790 | modifications. | |
| 791 | ||
| 792 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> | |
| 793 | ||
| 794 | commit 5072188acabde3178fac7f5a597150e6e74fd40c | |
| 795 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 796 | Date: Fri Jul 6 08:33:33 2007 +0800 | |
| 797 | ||
| 798 | This is a framebuffer driver for ATI video card, can work for PCI9200, | |
| 799 | X300, X700, X800 ATI video cards. | |
| 800 | ||
| 801 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> | |
| 802 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> | |
| 803 | ||
| 9c7e4b06 WD |
804 | commit 5728be389e65fd47f34b33c2596271eb4db751ae |
| 805 | Author: Wolfgang Denk <wd@denx.de> | |
| 806 | Date: Mon Aug 6 01:01:49 2007 +0200 | |
| 807 | ||
| 808 | Coding style cleanup. Update CHANGELOG. | |
| 809 | ||
| 810 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 811 | ||
| 5728be38 WD |
812 | commit 8092fef4c29b395958bb649647da7e3775731517 |
| 813 | Author: Martin Krause <Martin.Krause@tqs.de> | |
| 814 | Date: Tue Dec 12 14:26:01 2006 +0100 | |
| 815 | ||
| 816 | Add functions to list of exported functions | |
| 817 | ||
| 818 | Additionally export the following fuctions (to make trab_config build again): | |
| 819 | - simple_strtol() | |
| 820 | - strcmp() | |
| 821 | ||
| 822 | Also bump the ABI version to reflect this change | |
| 823 | ||
| 824 | Signed-off-by: Martin Krause <martin.krause@tqs.de> | |
| 825 | ||
| 826 | commit 63cec5814fab5d2b1c86982327433807a5ac0249 | |
| 827 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 828 | Date: Thu Aug 2 14:09:49 2007 -0500 | |
| 829 | ||
| 830 | Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts. | |
| 831 | ||
| 832 | All of the PCI/PCI-Express driver and initialization code that | |
| 833 | was in the MPC8641HPCN port has now been moved into the common | |
| 834 | drivers/fsl_pci_init.c. In a subsequent patch, this will be | |
| 835 | utilized by the 85xx ports as well. | |
| 836 | ||
| 837 | Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added. | |
| 838 | ||
| 839 | Also enable the second PCI-Express controller on 8641 | |
| 840 | by getting its BATS and CFG_ setup right. | |
| 841 | ||
| 842 | Fixed a u16 vendor compiler warning in AHCI driver too. | |
| 843 | ||
| 844 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 845 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> | |
| 846 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 847 | ||
| 9986bc3e WD |
848 | commit 86b116b1b1e165ca4840daefed36d2e3b8460173 |
| 849 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 850 | Date: Fri Aug 3 12:08:16 2007 +0200 | |
| 851 | ||
| 852 | cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family. | |
| 853 | ||
| 854 | Add the ability for modules from the Schindler cm5200 family to use a | |
| 855 | single U-Boot image: | |
| 856 | - rename cm1_qp1 to cm5200 | |
| 857 | - add run-time module detection | |
| 858 | - parametrize SDRAM configuration according to the module we are running on | |
| 859 | ||
| 860 | Few minor, board-specific fixes included in this patch: | |
| 861 | - better MAC address handling | |
| 862 | - updated default environment ('update' command uses +{filesize} now) | |
| 863 | - improved error messages in the auto-update code | |
| 864 | - allow booting U-Boot from RAM (CFG_RAMBOOT) | |
| 865 | ||
| 866 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> | |
| 867 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> | |
| 868 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 869 | ||
| 5728be38 WD |
870 | commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779 |
| 871 | Author: Andy Fleming <afleming@freescale.com> | |
| 872 | Date: Fri Aug 3 04:05:25 2007 -0500 | |
| 873 | ||
| 874 | Add Marvell 1149 PHY support to the TSEC | |
| 875 | ||
| f2c2a937 | 876 | commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86 |
| 5728be38 | 877 | Author: Wolfgang Denk <wd@denx.de> |
| f2c2a937 | 878 | Date: Thu Aug 2 21:27:46 2007 +0200 |
| 5728be38 | 879 | |
| f2c2a937 | 880 | Coding style cleanup, update CHANGELOG |
| 5728be38 WD |
881 | |
| 882 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 883 | ||
| 5728be38 WD |
884 | commit 63e22764d2f8653f68888c667eb65b3996b52680 |
| 885 | Author: Wolfgang Denk <wd@denx.de> | |
| 886 | Date: Thu Aug 2 10:11:18 2007 +0200 | |
| 887 | ||
| 888 | Minor cleanup of <board>_nand build rules. | |
| 889 | ||
| 890 | commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197 | |
| 891 | Author: Wolfgang Denk <wd@denx.de> | |
| 892 | Date: Thu Aug 2 00:48:45 2007 +0200 | |
| 893 | ||
| 894 | Fix build errors and warnings / code cleanup. | |
| 895 | ||
| 896 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 897 | ||
| b1b54e35 WD |
898 | commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6 |
| 899 | Author: Rafal Jaworowski <raj@semihalf.com> | |
| 900 | Date: Fri Jul 27 14:43:59 2007 +0200 | |
| 901 | ||
| 902 | [ADS5121] Support for the ADS5121 board | |
| 903 | ||
| 904 | The following MPC5121e subsystems are supported: | |
| 905 | ||
| 906 | - low-level CPU init | |
| 907 | - NOR Boot Flash (common CFI driver) | |
| 908 | - DDR SDRAM | |
| 909 | - FEC | |
| 910 | - I2C | |
| 911 | - Watchdog | |
| 912 | ||
| 913 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> | |
| 914 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> | |
| 915 | Signed-off-by: Jan Wrobel <wrr@semihalf.com> | |
| 916 | ||
| 917 | commit 1863cfb7b100ba0ee3401799457a01dc058745f8 | |
| 918 | Author: Rafal Jaworowski <raj@semihalf.com> | |
| 919 | Date: Fri Jul 27 14:22:04 2007 +0200 | |
| 920 | ||
| 921 | [PPC] Remove unused MSR_USER definition | |
| 922 | ||
| 923 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> | |
| 924 | ||
| 925 | commit cc3023b9f95d7ac959a764471a65001062aecf41 | |
| 926 | Author: Rafal Jaworowski <raj@semihalf.com> | |
| 927 | Date: Thu Jul 19 17:12:28 2007 +0200 | |
| 928 | ||
| 929 | Fix breakage of 8xx boards from recent commit. | |
| 930 | ||
| 931 | This patch fixes the negative consequences for 8xx of the recent | |
| 932 | "ppc4xx: Clean up 440 exceptions handling" commit. | |
| 933 | ||
| 934 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> | |
| 935 | ||
| 936 | commit 3a6cab844cf74f76639d795e0be8717e02c86af7 | |
| 937 | Author: Wolfgang Denk <wd@denx.de> | |
| 938 | Date: Sat Jul 14 22:51:02 2007 +0200 | |
| 939 | ||
| 940 | Update CHANGELOG | |
| 941 | ||
| 942 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 943 | ||
| 3a6cab84 WD |
944 | commit 011595307731a7a67a7445d107c279d031e8ab97 |
| 945 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 946 | Date: Sat Jul 14 01:06:58 2007 +0200 | |
| 947 | ||
| 948 | [PCS440EP] - fix compile error, if BUILD_DIR is used | |
| 949 | ||
| 950 | commit fad63407154f46246ce80d53a9c669a44362ac67 | |
| 951 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 952 | Date: Fri Jul 13 09:54:17 2007 +0200 | |
| 953 | ||
| 954 | make show_boot_progress () weak. | |
| 955 | ||
| 956 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 957 | ||
| 958 | commit 907902472391b6ca1876ec300687562ecaf459b1 | |
| 959 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 960 | Date: Fri Jul 13 08:26:05 2007 +0200 | |
| 961 | ||
| 962 | [PCS440EP] - The DIAG LEDs are now blinking, if an error occur | |
| 963 | - fix compile error, if BUILD_DIR is used | |
| 964 | ||
| 965 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 966 | ||
| 967 | commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 | |
| 968 | Author: Wolfgang Denk <wd@denx.de> | |
| 969 | Date: Thu Jul 12 01:45:34 2007 +0200 | |
| 970 | ||
| 971 | Update CHANGELOG, minor coding style cleanup. | |
| 972 | ||
| 973 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 974 | ||
| 5728be38 WD |
975 | commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654 |
| 976 | Author: Andy Fleming <afleming@freescale.com> | |
| 977 | Date: Fri Jun 8 16:41:18 2007 -0500 | |
| 978 | ||
| 979 | Remove erroneous errata code from Marvel 88E1111S driver | |
| 980 | ||
| 981 | The Marvel 88E1111S driver for the TSEC was copied from the | |
| 982 | 88E1101 driver, and included a fix for an erratum which does not | |
| ec06b273 | 983 | exist on that part. Now it is removed |
| 5728be38 WD |
984 | |
| 985 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 986 | ||
| 987 | commit 982efcf23fd03647e01e2fbe28a7a36239156cc0 | |
| 988 | Author: Andy Fleming <afleming@freescale.com> | |
| 989 | Date: Tue Jun 5 16:38:44 2007 -0500 | |
| 990 | ||
| 991 | From: eran liberty <eran.liberty@gmail.com> | |
| 992 | ||
| 993 | adds the reset register to 85xx immap | |
| 994 | ||
| 995 | Signed-off-by: Eran Liberty <eran.liberty@gmail.com> | |
| 996 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 997 | ||
| 998 | commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7 | |
| 999 | Author: Andy Fleming <afleming@freescale.com> | |
| 1000 | Date: Thu May 10 17:50:01 2007 -0500 | |
| 1001 | ||
| 1002 | Polished the 85xx ADS config files | |
| 1003 | ||
| 1004 | Made the boot commands use device trees by default. | |
| 1005 | Also moved the ramdisk to 1000000 (I think the previous address | |
| 1006 | was getting overridden during boot). | |
| 1007 | ||
| 1008 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 1009 | ||
| 1010 | commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038 | |
| 1011 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1012 | Date: Wed May 9 11:03:32 2007 -0500 | |
| 1013 | ||
| 1014 | 8544ds: Fix Makefile after moving pixis to board/freescale. | |
| 1015 | ||
| 1016 | The OBJTREE != SRCTREE build scenario was broken. | |
| 1017 | This fixes it. | |
| 1018 | ||
| 1019 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1020 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1021 | ||
| 1022 | commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e | |
| 1023 | Author: Andy Fleming <afleming@freescale.com> | |
| 1024 | Date: Wed May 9 00:54:20 2007 -0500 | |
| 1025 | ||
| 1026 | tsec: Fix PHY code to match first driver | |
| 1027 | ||
| 1028 | Jarrold Wen noticed that the generic PHY code always matches | |
| 1029 | under the current implementation. Change it so the first match | |
| 1030 | wins, and *only* unknown PHYs trigger the generic driver | |
| 1031 | ||
| 1032 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 1033 | ||
| 1034 | commit ccc091aac61a38cd998d575d92f7232e256d6312 | |
| 1035 | Author: Andy Fleming <afleming@freescale.com> | |
| 1036 | Date: Tue May 8 17:27:43 2007 -0500 | |
| 1037 | ||
| 1038 | Add support for CPM device tree configuration to 8560 ADS | |
| 1039 | ||
| 1040 | * Adds code to modify CPM frequencies | |
| 1041 | * Cleans up the config file to #define TSEC and (for now) #undef FCC | |
| 1042 | * Adds the MII command for all 8560 ADS configurations | |
| 1043 | * Updates config file to provide convenience commands for booting | |
| 1044 | with a device tree | |
| 1045 | ||
| 1046 | Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> | |
| 1047 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 1048 | ||
| 1049 | commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9 | |
| 1050 | Author: Andy Fleming <afleming@freescale.com> | |
| 1051 | Date: Tue May 8 17:23:02 2007 -0500 | |
| 1052 | ||
| 1053 | Fix Marvell 88e1145 PHY init code | |
| 1054 | ||
| 1055 | Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver | |
| 1056 | where the reset was being done after the errata code instead of | |
| 1057 | before. | |
| 1058 | ||
| 1059 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> | |
| 1060 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 1061 | ||
| 1062 | commit 5dc210dec5bace98a50b6ba905347890091a9bb0 | |
| 1063 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1064 | Date: Wed Jul 11 14:52:16 2007 -0500 | |
| 1065 | ||
| 1066 | Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC. | |
| 1067 | ||
| 1068 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1069 | ||
| 1070 | commit e8b85f3ba4cd8930e0a2fea2100c815d64201765 | |
| 1071 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1072 | Date: Wed Jul 11 14:52:08 2007 -0500 | |
| 1073 | ||
| 1074 | pciauto setup bridge | |
| 1075 | ||
| 1076 | The P2P bridge bus numbers programmed into the device are relative to | |
| 1077 | hose->first_busno. | |
| 1078 | ||
| 1079 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1080 | ||
| 1081 | commit 571f49fa717004ca4268b4e24057efc7bf9f987b | |
| 1082 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1083 | Date: Wed Jul 11 14:52:01 2007 -0500 | |
| 1084 | ||
| 1085 | Support PCIe extended config registers | |
| 1086 | ||
| 1087 | FSL PCIe block has extended cfg registers in the 100 and 400 range. | |
| 1088 | For example, to read the LTSSM register: pci display <busn>.0 404 1 | |
| 1089 | ||
| 1090 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1091 | ||
| 1092 | commit ba5feb12581bb2912ce301e4866b71f846e9fc07 | |
| 1093 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1094 | Date: Wed Jul 11 14:51:48 2007 -0500 | |
| 1095 | ||
| 1096 | Minor improvements to drivers/pci_auto.c | |
| 1097 | ||
| 1098 | - Make pciauto_{pre,post}scan_setup_bridge non-static | |
| 1099 | - Added physical address display in debug messages. | |
| 1100 | ||
| 1101 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1102 | ||
| 1103 | commit 40e81addab7bb74d20ddf681ce9babc880a828ee | |
| 1104 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1105 | Date: Wed Jul 11 14:51:35 2007 -0500 | |
| 1106 | ||
| 1107 | Start pci hose scan from hose->current_busno. | |
| 1108 | ||
| 1109 | Ensure hose->current_busno is not less than first_busno. This fixes | |
| 1110 | broken board code which leaves current_busno=0 when first_busno is | |
| 1111 | greater than 0 for the cases with multiple controllers. | |
| 1112 | ||
| 1113 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 1114 | ||
| 1115 | commit 3865b1fb7843a08ad49a6319a36415752276ff48 | |
| 1116 | Author: Stefan Roese <sr@denx.de> | |
| 1117 | Date: Wed Jul 11 12:13:53 2007 +0200 | |
| 1118 | ||
| 1119 | Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup | |
| 1120 | ||
| 1121 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 1122 | ||
| 239f05ee WD |
1123 | commit fa1df308926a6f70e3504c57514ef27ac31fd13a |
| 1124 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 1125 | Date: Wed Jul 11 20:11:07 2007 +0200 | |
| 1126 | ||
| 1127 | CM1.QP1: Support for the Schindler CM1.QP1 board. | |
| 1128 | ||
| 1129 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> | |
| 1130 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 1131 | ||
| 1132 | commit 96e1d75be8193ca79e4215a368bf9d7f2362450f | |
| 1133 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 1134 | Date: Wed Jul 11 18:39:11 2007 +0200 | |
| 1135 | ||
| 1136 | [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed | |
| 1137 | - now the Flash ST M29W040B is supported (not tested) | |
| 1138 | - fix the "led" command | |
| 1139 | - fix compile error, if BUILD_DIR is used | |
| 1140 | ||
| 1141 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 1142 | ||
| 5728be38 WD |
1143 | commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5 |
| 1144 | Author: Stefan Roese <sr@denx.de> | |
| 1145 | Date: Sun Jul 8 13:44:27 2007 +0200 | |
| 1146 | ||
| 1147 | Fix malloc problem introduced with the relocation fixup for the PPC platform | |
| 1148 | ||
| 1149 | The relocation fixup didn't handle the malloc pointer initialization | |
| 1150 | correctly. This patch fixes this problem. Tested successfully on 4xx. | |
| 1151 | The relocation fixup patches for 4xx will follow soon. | |
| 1152 | ||
| 1153 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 1154 | ||
| 1155 | commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582 | |
| 1156 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1157 | Date: Tue Jul 10 11:19:50 2007 -0500 | |
| 1158 | ||
| 1159 | disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols. | |
| 1160 | ||
| 1161 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. | |
| 1162 | Those always evaluated TRUE, and thus were always compiled | |
| 1163 | even when IDE really wasn't defined/wanted. | |
| 1164 | ||
| 1165 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1166 | ||
| 1167 | commit ddb5d86f0215bcb6c293510c50eb050e92883b7a | |
| 1168 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1169 | Date: Tue Jul 10 11:13:21 2007 -0500 | |
| 1170 | ||
| 1171 | drivers/: Remove lingering references to CFG_CMD_* symbols. | |
| 1172 | ||
| 1173 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. | |
| 1174 | Those always evaluated TRUE, and thus were always compiled | |
| 1175 | even when IDE really wasn't defined/wanted. | |
| 1176 | ||
| 1177 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1178 | ||
| 1179 | commit f40a7f3e3888b42a43674b099e5470022c8c544c | |
| 1180 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1181 | Date: Tue Jul 10 11:07:56 2007 -0500 | |
| 1182 | ||
| 1183 | fs/: Remove lingering references to CFG_CMD_* symbols. | |
| 1184 | ||
| 1185 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. | |
| 1186 | Those always evaluated TRUE, and thus were always compiled | |
| 1187 | even when IDE really wasn't defined/wanted. | |
| 1188 | ||
| 1189 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1190 | ||
| 1191 | commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593 | |
| 1192 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1193 | Date: Tue Jul 10 11:05:02 2007 -0500 | |
| 1194 | ||
| 1195 | net/: Remove lingering references to CFG_CMD_* symbols. | |
| 1196 | ||
| 1197 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. | |
| 1198 | Those always evaluated TRUE, and thus were always compiled | |
| 1199 | even when IDE really wasn't defined/wanted. | |
| 1200 | ||
| 1201 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1202 | ||
| 1203 | commit 902531788376046da212afd1661cffb62f3daa1c | |
| 1204 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1205 | Date: Tue Jul 10 11:02:44 2007 -0500 | |
| 1206 | ||
| 1207 | common/: Remove lingering references to CFG_CMD_* symbols. | |
| 1208 | ||
| 1209 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. | |
| 1210 | Those always evaluated TRUE, and thus were always compiled | |
| 1211 | even when IDE really wasn't defined/wanted. | |
| 1212 | ||
| 1213 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1214 | ||
| 1215 | commit d39b57415838c73fb0a37eca84de3c68ba990586 | |
| 1216 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1217 | Date: Tue Jul 10 10:48:22 2007 -0500 | |
| 1218 | ||
| 1219 | board/[j-z]*: Remove lingering references to CFG_CMD_* symbols. | |
| 1220 | ||
| 1221 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. | |
| 1222 | Those always evaluated TRUE, and thus were always compiled | |
| 1223 | even when IDE really wasn't defined/wanted. | |
| 1224 | ||
| 1225 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1226 | ||
| 1227 | commit 77a318545d57aefa844752465b94c7e09a3f26d0 | |
| 1228 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1229 | Date: Tue Jul 10 10:39:10 2007 -0500 | |
| 1230 | ||
| 1231 | board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols. | |
| 1232 | ||
| 1233 | Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. | |
| 1234 | Those always evaluated TRUE, and thus were always compiled | |
| 1235 | even when IDE really wasn't defined/wanted. | |
| 1236 | ||
| 1237 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1238 | ||
| 1239 | commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d | |
| 1240 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1241 | Date: Tue Jul 10 10:27:39 2007 -0500 | |
| 1242 | ||
| 1243 | cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols. | |
| 1244 | ||
| 1245 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1246 | ||
| 1247 | commit 079a136c3588814784561d6e4856970ee82d6e2a | |
| 1248 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1249 | Date: Tue Jul 10 10:12:10 2007 -0500 | |
| 1250 | ||
| 1251 | include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*. | |
| 1252 | ||
| 1253 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h | |
| 1254 | used to be included but CONFIG_BOOTP_MASK was not defined. | |
| 1255 | ||
| 1256 | Remove lingering references to CFG_CMD_* symbols. | |
| 1257 | ||
| 1258 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1259 | ||
| 1260 | commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c | |
| 1261 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1262 | Date: Tue Jul 10 09:38:02 2007 -0500 | |
| 1263 | ||
| 1264 | include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*. | |
| 1265 | ||
| 1266 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h | |
| 1267 | used to be included but CONFIG_BOOTP_MASK was not defined. | |
| 1268 | ||
| 1269 | Remove lingering references to CFG_CMD_* symbols. | |
| 1270 | ||
| 1271 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1272 | ||
| 1273 | commit 80ff4f99b84b64edca3fd10da365ec1493be1c95 | |
| 1274 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1275 | Date: Tue Jul 10 09:29:01 2007 -0500 | |
| 1276 | ||
| 1277 | include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*. | |
| 1278 | ||
| 1279 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h | |
| 1280 | used to be included but CONFIG_BOOTP_MASK was not defined. | |
| 1281 | ||
| 1282 | Remove lingering references to CFG_CMD_* symbols. | |
| 1283 | ||
| 1284 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1285 | ||
| 1286 | commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a | |
| 1287 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1288 | Date: Tue Jul 10 09:22:23 2007 -0500 | |
| 1289 | ||
| 1290 | include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*. | |
| 1291 | ||
| 1292 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h | |
| 1293 | used to be included but CONFIG_BOOTP_MASK was not defined. | |
| 1294 | ||
| 1295 | Remove lingering references to CFG_CMD_* symbols. | |
| 1296 | ||
| 1297 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1298 | ||
| 1299 | commit 659e2f6736232a08acca8785c206e2b4d9cd07d7 | |
| 1300 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1301 | Date: Tue Jul 10 09:10:49 2007 -0500 | |
| 1302 | ||
| 1303 | include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*. | |
| 1304 | ||
| 1305 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h | |
| 1306 | used to be included but CONFIG_BOOTP_MASK was not defined. | |
| 1307 | ||
| 1308 | Remove lingering references to CFG_CMD_* symbols. | |
| 1309 | ||
| 1310 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1311 | ||
| 1312 | commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b | |
| 1313 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1314 | Date: Tue Jul 10 09:02:57 2007 -0500 | |
| 1315 | ||
| 1316 | include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*. | |
| 1317 | ||
| 1318 | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h | |
| 1319 | used to be included but CONFIG_BOOTP_MASK was not defined. | |
| 1320 | ||
| 1321 | Remove lingering references to CFG_CMD_* symbols. | |
| 1322 | ||
| 1323 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1324 | ||
| 1325 | commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3 | |
| 1326 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1327 | Date: Mon Jul 9 22:08:34 2007 -0500 | |
| 1328 | ||
| 1329 | Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK! | |
| 1330 | ||
| 1331 | All of the choices for CONFIG_BOOTP_ are now documented in | |
| 1332 | the README file. You must now individually select exactly | |
| 1333 | the set that you want using a series of | |
| 1334 | #define CONFIG_BOOTP_<x> | |
| 1335 | statements in the board port config files now. | |
| 1336 | ||
| 1337 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1338 | ||
| 1339 | commit d3b8c1a743dcd31625c99e6a44590f207eb00028 | |
| 1340 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1341 | Date: Mon Jul 9 21:57:31 2007 -0500 | |
| 1342 | ||
| 1343 | include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. | |
| 1344 | ||
| 1345 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1346 | ||
| 1347 | commit 2fd90ce575b02d189cbf443c85309bcd001aa393 | |
| 1348 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1349 | Date: Mon Jul 9 21:48:26 2007 -0500 | |
| 1350 | ||
| 1351 | include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. | |
| 1352 | ||
| 1353 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1354 | ||
| 1355 | commit 37d4bb70586659dedef1658ce1bed071be098aec | |
| 1356 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1357 | Date: Mon Jul 9 21:38:02 2007 -0500 | |
| 1358 | ||
| 1359 | include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. | |
| 1360 | ||
| 1361 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1362 | ||
| 1363 | commit 18225e8dd1950bd6dbf35011e436db7f474c187d | |
| 1364 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1365 | Date: Mon Jul 9 21:31:24 2007 -0500 | |
| 1366 | ||
| 1367 | include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. | |
| 1368 | ||
| 1369 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1370 | ||
| 1371 | commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d | |
| 1372 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1373 | Date: Mon Jul 9 21:24:19 2007 -0500 | |
| 1374 | ||
| 1375 | include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. | |
| 1376 | ||
| 1377 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1378 | ||
| 1379 | commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f | |
| 1380 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1381 | Date: Mon Jul 9 21:16:53 2007 -0500 | |
| 1382 | ||
| 1383 | include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK. | |
| 1384 | ||
| 1385 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1386 | ||
| 1387 | commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3 | |
| 1388 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1389 | Date: Mon Jul 9 19:12:30 2007 -0500 | |
| 1390 | ||
| 1391 | Retire CONFIG_COMMANDS finally. | |
| 1392 | Strip old CFG_CMD_* symbols out. | |
| 1393 | ||
| 1394 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1395 | ||
| 1396 | commit b5501f7d720fed99ab0b42c83f5dea52868ce007 | |
| 1397 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1398 | Date: Mon Jul 9 19:10:03 2007 -0500 | |
| 1399 | ||
| 1400 | Update README.* to reference new CONFIG_CMD_* names now. | |
| 1401 | ||
| 1402 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1403 | ||
| 1404 | commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9 | |
| 1405 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1406 | Date: Mon Jul 9 19:06:00 2007 -0500 | |
| 1407 | ||
| 1408 | cpu/m*: Remove obsolete references to CONFIG_COMMANDS | |
| 1409 | ||
| 1410 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1411 | ||
| 1412 | commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa | |
| 1413 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1414 | Date: Mon Jul 9 18:57:22 2007 -0500 | |
| 1415 | ||
| 1416 | cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS | |
| 1417 | ||
| 1418 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1419 | ||
| 1420 | commit ab3abcbabd840928fb1eb5122118ca466b5e5013 | |
| 1421 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1422 | Date: Mon Jul 9 18:45:16 2007 -0500 | |
| 1423 | ||
| 1424 | board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS | |
| 1425 | ||
| 1426 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1427 | ||
| 1428 | commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9 | |
| 1429 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1430 | Date: Mon Jul 9 18:38:39 2007 -0500 | |
| 1431 | ||
| 1432 | board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS | |
| 1433 | ||
| 1434 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1435 | ||
| 1436 | commit c508a4cefd8a953fc64957650506a035e6e3d9d1 | |
| 1437 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1438 | Date: Mon Jul 9 18:31:28 2007 -0500 | |
| 1439 | ||
| 1440 | board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS | |
| 1441 | ||
| 1442 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1443 | ||
| 1444 | commit b9307262f8a9f3b5c9e15a6067eadc17407146f6 | |
| 1445 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1446 | Date: Mon Jul 9 18:24:55 2007 -0500 | |
| 1447 | ||
| 1448 | board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS | |
| 1449 | ||
| 1450 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1451 | ||
| 1452 | commit fcec2eb93e126400009729328e797f12bc94f1fd | |
| 1453 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1454 | Date: Mon Jul 9 18:19:09 2007 -0500 | |
| 1455 | ||
| 1456 | board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS | |
| 1457 | ||
| 1458 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1459 | ||
| 1460 | commit a593814f2be0c9cdc3133cd550b167b8a988328f | |
| 1461 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1462 | Date: Mon Jul 9 18:10:50 2007 -0500 | |
| 1463 | ||
| 1464 | rtc/: Remove obsolete references to CONFIG_COMMANDS | |
| 1465 | ||
| 1466 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1467 | ||
| 1468 | commit 67350568f9d46e66c21829f3513b3db0caeb948b | |
| 1469 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1470 | Date: Mon Jul 9 18:05:38 2007 -0500 | |
| 1471 | ||
| 1472 | lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS | |
| 1473 | ||
| 1474 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1475 | ||
| 1476 | commit 7def6b34f910f08d7ef0a14646da067719237ca2 | |
| 1477 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1478 | Date: Mon Jul 9 18:02:11 2007 -0500 | |
| 1479 | ||
| 1480 | lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS | |
| 1481 | ||
| 1482 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1483 | ||
| 1484 | commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb | |
| 1485 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1486 | Date: Mon Jul 9 17:56:50 2007 -0500 | |
| 1487 | ||
| 1488 | fs/: Remove obsolete references to CONFIG_COMMANDS | |
| 1489 | ||
| 1490 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1491 | ||
| 1492 | commit c91898bbc505aff3e12a807af88e76da18efb7ee | |
| 1493 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1494 | Date: Mon Jul 9 17:46:09 2007 -0500 | |
| 1495 | ||
| 1496 | tools/: Remove obsolete references to CONFIG_COMMANDS | |
| 1497 | ||
| 1498 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1499 | ||
| 1500 | commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01 | |
| 1501 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1502 | Date: Mon Jul 9 17:45:14 2007 -0500 | |
| 1503 | ||
| 1504 | net/: Remove obsolete references to CONFIG_COMMANDS | |
| 1505 | ||
| 1506 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1507 | ||
| 1508 | commit cb51c0bf88f95a1bca68324b0126f8eed8b43273 | |
| 1509 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1510 | Date: Mon Jul 9 17:39:42 2007 -0500 | |
| 1511 | ||
| 1512 | drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS | |
| 1513 | ||
| 1514 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1515 | ||
| 1516 | commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b | |
| 1517 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1518 | Date: Mon Jul 9 17:30:01 2007 -0500 | |
| 1519 | ||
| 1520 | drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS | |
| 1521 | ||
| 1522 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1523 | ||
| 1524 | commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29 | |
| 1525 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1526 | Date: Mon Jul 9 17:22:37 2007 -0500 | |
| 1527 | ||
| 1528 | disk/: Remove obsolete references to CONFIG_COMMANDS | |
| 1529 | ||
| 1530 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1531 | ||
| 1532 | commit 639221c76c88215bd55af83ad174fc30d1940f8f | |
| 1533 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1534 | Date: Mon Jul 9 17:15:49 2007 -0500 | |
| 1535 | ||
| 1536 | include/: Remove obsolete references to CONFIG_COMMANDS | |
| 1537 | Mostly removed from comments here. | |
| 1538 | ||
| 1539 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1540 | ||
| 239f05ee WD |
1541 | commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876 |
| 1542 | Author: Wolfgang Denk <wd@denx.de> | |
| 1543 | Date: Tue Jul 10 00:01:28 2007 +0200 | |
| 1544 | ||
| 1545 | Coding style cleanup; update CHANGELOG. | |
| 1546 | ||
| 1547 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 1548 | ||
| 5728be38 WD |
1549 | commit c3517f919d0f61650cf3027fd4faf0f631142f6c |
| 1550 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1551 | Date: Sun Jul 8 18:10:08 2007 -0500 | |
| 4ef218f6 | 1552 | |
| 5728be38 | 1553 | common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS |
| 4ef218f6 | 1554 | |
| 5728be38 | 1555 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 4ef218f6 | 1556 | |
| 5728be38 WD |
1557 | commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39 |
| 1558 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1559 | Date: Sun Jul 8 18:05:39 2007 -0500 | |
| 4ef218f6 | 1560 | |
| 5728be38 | 1561 | common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS. |
| 4ef218f6 | 1562 | |
| 5728be38 | 1563 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 4ef218f6 | 1564 | |
| 5728be38 WD |
1565 | commit c76fe47425afc7d5d670ff0539823c85d65d9c42 |
| 1566 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1567 | Date: Sun Jul 8 18:02:23 2007 -0500 | |
| 4ef218f6 | 1568 | |
| 5728be38 | 1569 | common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS. |
| 4ef218f6 | 1570 | |
| 5728be38 | 1571 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 4ef218f6 | 1572 | |
| 5728be38 WD |
1573 | commit baa26db4113679b80970ff447d91cc10217742a6 |
| 1574 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1575 | Date: Sun Jul 8 17:51:39 2007 -0500 | |
| 4ef218f6 | 1576 | |
| 5728be38 | 1577 | common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS. |
| 4ef218f6 | 1578 | |
| 5728be38 | 1579 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 4ef218f6 | 1580 | |
| 5728be38 WD |
1581 | commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd |
| 1582 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1583 | Date: Sun Jul 8 17:02:01 2007 -0500 | |
| 1584 | ||
| 1585 | Clear up confusion over the CMD_POST and POST_DIAG mess. | |
| 1586 | ||
| 1587 | For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG | |
| 1588 | when it really means just CONFIG_CMD_DIAG. There is no CMD_POST. | |
| 1589 | Clear this mess up some. | |
| 1590 | ||
| 1591 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1592 | ||
| 1593 | commit b3631487105a57ab7cbadfc26efbaf9676275018 | |
| 1594 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1595 | Date: Sun Jul 8 15:45:08 2007 -0500 | |
| 1596 | ||
| 1597 | Remove references to the old cmd_confdefs.h include file. | |
| 1598 | ||
| 1599 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1600 | ||
| 1601 | commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6 | |
| 1602 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1603 | Date: Sun Jul 8 15:42:59 2007 -0500 | |
| 1604 | ||
| 1605 | include/configs: Catch some CONFIG_CMD_* conversion stragglers. | |
| 1606 | ||
| 1607 | Use new CONFIG_CMD_* in lwmon5.h board config file. | |
| 1608 | Fix CONFIG_CMD_* typo braindamage in omap1510inn.h | |
| 1609 | ||
| 1610 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1611 | ||
| 1612 | commit a5562901661bd428f7e5feb333f796372cb81019 | |
| 1613 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1614 | Date: Sun Jul 8 15:31:57 2007 -0500 | |
| 1615 | ||
| 1616 | include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files. | |
| 1617 | ||
| 1618 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1619 | ||
| 1620 | commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e | |
| 1621 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1622 | Date: Sun Jul 8 15:02:44 2007 -0500 | |
| 1623 | ||
| 1624 | include/configs: Use new CONFIG_CMD_* in various S* named board config files. | |
| 1625 | ||
| 1626 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1627 | ||
| 1628 | commit e9a0f8f15c11f337967aa0600ad6e8af33037f50 | |
| 1629 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1630 | Date: Sun Jul 8 15:12:40 2007 -0500 | |
| 1631 | ||
| 1632 | include/configs: Use new CONFIG_CMD_* in various R* named board config files. | |
| 1633 | ||
| 1634 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1635 | ||
| 1636 | commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f | |
| 1637 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1638 | Date: Sun Jul 8 14:55:07 2007 -0500 | |
| 1639 | ||
| 1640 | include/configs: Use new CONFIG_CMD_* in various Q* named board config files. | |
| 1641 | ||
| 1642 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1643 | ||
| 1644 | commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e | |
| 1645 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1646 | Date: Sun Jul 8 14:49:44 2007 -0500 | |
| 1647 | ||
| 1648 | include/configs: Use new CONFIG_CMD_* in various P* named board config files. | |
| 1649 | ||
| 1650 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1651 | ||
| 1652 | commit e18a1061a8630cb67995fdf99afd3fb50d1b187d | |
| 1653 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1654 | Date: Sun Jul 8 14:21:43 2007 -0500 | |
| 1655 | ||
| 1656 | include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files. | |
| 1657 | ||
| 1658 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1659 | ||
| 1660 | commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2 | |
| 1661 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1662 | Date: Sun Jul 8 14:14:17 2007 -0500 | |
| 1663 | ||
| 1664 | include/configs: Use new CONFIG_CMD_* in various M* named board config files. | |
| 1665 | ||
| 1666 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1667 | ||
| 1668 | commit 348f258f24253433e4a2302a0bbceb6740a67246 | |
| 1669 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1670 | Date: Sun Jul 8 13:46:18 2007 -0500 | |
| 1671 | ||
| 1672 | include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files. | |
| 1673 | ||
| 1674 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1675 | ||
| 1676 | commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a | |
| 1677 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1678 | Date: Sun Jul 8 10:09:35 2007 -0500 | |
| 1679 | ||
| 1680 | include/configs: Use new CONFIG_CMD_* in various H* named board config files. | |
| 1681 | ||
| 1682 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1683 | ||
| 1684 | commit 60a0876b5106b34220e459c208bbf648073306c0 | |
| 1685 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1686 | Date: Sat Jul 7 21:04:26 2007 -0500 | |
| 1687 | ||
| 1688 | include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files. | |
| 1689 | ||
| 1690 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1691 | ||
| 1692 | commit dcaa71562826a2466e894c868d132509dcda8444 | |
| 1693 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1694 | Date: Sat Jul 7 20:56:05 2007 -0500 | |
| 1695 | ||
| 1696 | include/configs: Use new CONFIG_CMD_* in various E* named board config files. | |
| 1697 | ||
| 1698 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1699 | ||
| 1700 | commit 3c3227f3c737502311b25b72084573901cbbf17d | |
| 1701 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1702 | Date: Sat Jul 7 20:40:43 2007 -0500 | |
| 1703 | ||
| 1704 | include/configs: Use new CONFIG_CMD_* in various D* named board config files. | |
| 1705 | ||
| 1706 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1707 | ||
| 1708 | commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c | |
| 1709 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1710 | Date: Thu Jul 5 19:52:35 2007 -0500 | |
| 1711 | ||
| 1712 | include/configs: Use new CONFIG_CMD_* in various C* named board config files. | |
| 1713 | ||
| 1714 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1715 | ||
| 1716 | commit de8b2a6e33298dcdb10bdda48db25e53c3089eba | |
| 1717 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1718 | Date: Thu Jul 5 19:32:07 2007 -0500 | |
| 1719 | ||
| 1720 | include/configs: Use new CONFIG_CMD_* in various B* named board config files. | |
| 1721 | ||
| 1722 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1723 | ||
| 1724 | commit 498ff9a228485bd4b9f23d066bada268f9add1dd | |
| 1725 | Author: Jon Loeliger <jdl@freescale.com> | |
| 1726 | Date: Thu Jul 5 19:13:52 2007 -0500 | |
| 1727 | ||
| 1728 | include/configs: Use new CONFIG_CMD_* in various A* named board config files. | |
| 1729 | ||
| 1730 | Since ADS860.h includes "board/fads/fads.h" with ramifications | |
| 1731 | on the CONFIG_COMMAND treatment, it too has to be adjusted to | |
| 1732 | exclude already configured commands in this same commit. | |
| 1733 | ||
| 1734 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1735 | ||
| 1736 | commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e | |
| 1737 | Author: Stefan Roese <sr@denx.de> | |
| 1738 | Date: Fri Jul 6 09:45:47 2007 +0200 | |
| 1739 | ||
| 1740 | Fix problem with get/setdcr commands introduced by cfg patches | |
| 1741 | ||
| 1742 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 1743 | ||
| 1744 | commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f | |
| 1745 | Author: Wolfgang Denk <wd@denx.de> | |
| 1746 | Date: Fri Jul 6 02:50:19 2007 +0200 | |
| 1747 | ||
| 1748 | Code cleanup and default config update for STC GP3 SSA board. | |
| 1749 | ||
| 1750 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 1751 | ||
| 1752 | commit e4dbe1b215f5c6c462e76909d240bd96472b84de | |
| 1753 | Author: Wolfgang Denk <wd@denx.de> | |
| 1754 | Date: Thu Jul 5 17:56:27 2007 +0200 | |
| 1755 | ||
| 1756 | Fixing some typos etc. introduced mainly by cfg patches. | |
| 1757 | ||
| 1758 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 1759 | ||
| 1760 | commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd | |
| 1761 | Author: Wolfgang Denk <wd@denx.de> | |
| 1762 | Date: Thu Jul 5 11:12:16 2007 +0200 | |
| 1763 | ||
| 1764 | Minor coding style cleanup. Update CHANGELOG. | |
| 1765 | ||
| b6b46845 WD |
1766 | commit dca3b3d6d6396b67e5e84af53452164923c73443 |
| 1767 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1768 | Date: Wed Jul 4 22:33:46 2007 -0500 | |
| 1769 | ||
| 1770 | include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files. | |
| 1771 | ||
| 1772 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1773 | ||
| 1774 | commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7 | |
| 1775 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1776 | Date: Wed Jul 4 22:33:38 2007 -0500 | |
| 1777 | ||
| 1778 | include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files. | |
| 1779 | ||
| 1780 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1781 | ||
| 1782 | commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76 | |
| 1783 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1784 | Date: Wed Jul 4 22:33:30 2007 -0500 | |
| 1785 | ||
| 1786 | include/configs: Use new CONFIG_CMD_* in various s* named board config files. | |
| 1787 | ||
| 1788 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1789 | ||
| 1790 | commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8 | |
| 1791 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1792 | Date: Wed Jul 4 22:33:23 2007 -0500 | |
| 1793 | ||
| 1794 | include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files. | |
| 1795 | ||
| 1796 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1797 | ||
| 1798 | commit 26a34560d56a9df5bc2ae23525d9229736134757 | |
| 1799 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1800 | Date: Wed Jul 4 22:33:17 2007 -0500 | |
| 1801 | ||
| 1802 | include/configs: Use new CONFIG_CMD_* in various p* named board config files. | |
| 1803 | ||
| 1804 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1805 | ||
| 1806 | commit a5cb23092a7d31490a33d4ec871468b63babfa3c | |
| 1807 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1808 | Date: Wed Jul 4 22:33:13 2007 -0500 | |
| 1809 | ||
| 1810 | include/configs: Use new CONFIG_CMD_* in various o* named board config files. | |
| 1811 | ||
| 1812 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1813 | ||
| 1814 | commit 929a2bfd142737003a8fc32e1b86e1f2c1850257 | |
| 1815 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1816 | Date: Wed Jul 4 22:33:07 2007 -0500 | |
| 1817 | ||
| 1818 | include/configs: Use new CONFIG_CMD_* in various n* named board config files. | |
| 1819 | ||
| 1820 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1821 | ||
| 1822 | commit 5dc11a511960d490f7f01ffd746edfe6277f99b0 | |
| 1823 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1824 | Date: Wed Jul 4 22:33:01 2007 -0500 | |
| 1825 | ||
| 1826 | include/configs: Use new CONFIG_CMD_* in various m* named board config files. | |
| 1827 | ||
| 1828 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1829 | ||
| 1830 | commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4 | |
| 1831 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1832 | Date: Wed Jul 4 22:32:57 2007 -0500 | |
| 1833 | ||
| 1834 | include/configs: Use new CONFIG_CMD_* in various l* named board config files. | |
| 1835 | ||
| 1836 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1837 | ||
| 1838 | commit bc234c129fa04fb9fa33530930e5cbc6084cd47a | |
| 1839 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1840 | Date: Wed Jul 4 22:32:51 2007 -0500 | |
| 1841 | ||
| 1842 | include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files. | |
| 1843 | ||
| 1844 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1845 | ||
| 1846 | commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31 | |
| 1847 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1848 | Date: Wed Jul 4 22:32:32 2007 -0500 | |
| 1849 | ||
| 1850 | include/configs: Use new CONFIG_CMD_* in various i* named board config files. | |
| 1851 | ||
| 1852 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1853 | ||
| 1854 | commit 48d5d102a2f2e619c92050b9aedbb69689185bc0 | |
| 1855 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1856 | Date: Wed Jul 4 22:32:25 2007 -0500 | |
| 1857 | ||
| 1858 | include/configs: Use new CONFIG_CMD_* in various h* named board config files. | |
| 1859 | ||
| 1860 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1861 | ||
| 1862 | commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36 | |
| 1863 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1864 | Date: Wed Jul 4 22:32:19 2007 -0500 | |
| 1865 | ||
| 1866 | include/configs: Use new CONFIG_CMD_* in various g* named board config files. | |
| 1867 | ||
| 1868 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1869 | ||
| 1870 | commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e | |
| 1871 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1872 | Date: Wed Jul 4 22:32:10 2007 -0500 | |
| 1873 | ||
| 1874 | include/configs: Use new CONFIG_CMD_* in various e* named board config files. | |
| 1875 | ||
| 1876 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1877 | ||
| 1878 | commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4 | |
| 1879 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1880 | Date: Wed Jul 4 22:32:03 2007 -0500 | |
| 1881 | ||
| 1882 | include/configs: Use new CONFIG_CMD_* in various d* named board config files. | |
| 1883 | ||
| 1884 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1885 | ||
| 1886 | commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b | |
| 1887 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1888 | Date: Wed Jul 4 22:31:56 2007 -0500 | |
| 1889 | ||
| 1890 | include/configs: Use new CONFIG_CMD_* in various c* named board config files. | |
| 1891 | ||
| 1892 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1893 | ||
| 1894 | commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264 | |
| 1895 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1896 | Date: Wed Jul 4 22:31:49 2007 -0500 | |
| 1897 | ||
| 1898 | include/configs: Use new CONFIG_CMD_* in various b* named board config files. | |
| 1899 | ||
| 1900 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1901 | ||
| 1902 | commit 0b361c916617aff79e647b40f0e43361e0bbaccf | |
| 1903 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1904 | Date: Wed Jul 4 22:31:42 2007 -0500 | |
| 1905 | ||
| 1906 | include/configs: Use new CONFIG_CMD_* in various a* named board config files. | |
| 1907 | ||
| 1908 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1909 | ||
| 1910 | commit b730cda82e362df6a22f4c59c0a9b97e885b1014 | |
| 1911 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1912 | Date: Wed Jul 4 22:31:35 2007 -0500 | |
| 1913 | ||
| 1914 | include/configs: Use new CONFIG_CMD_* in mpc5xx board config files. | |
| 1915 | ||
| 1916 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1917 | ||
| 1918 | commit d794cfefead5fc177cf4f41164e80382e9c9484a | |
| 1919 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1920 | Date: Wed Jul 4 22:31:15 2007 -0500 | |
| 1921 | ||
| 1922 | include/configs: Use new CONFIG_CMD_* in various 5200 board config files. | |
| 1923 | ||
| 1924 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1925 | ||
| 1926 | commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c | |
| 1927 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1928 | Date: Wed Jul 4 22:31:07 2007 -0500 | |
| 1929 | ||
| 1930 | include/configs: Use new CONFIG_CMD_* in STx board config files. | |
| 1931 | ||
| 1932 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1933 | ||
| 1934 | commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc | |
| 1935 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1936 | Date: Wed Jul 4 22:30:58 2007 -0500 | |
| 1937 | ||
| 1938 | include/configs: Use new CONFIG_CMD_* in sbc* board config files. | |
| 1939 | ||
| 1940 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1941 | ||
| 1942 | commit 2694690e285acaa34922f55f4b5ae030da60c55a | |
| 1943 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1944 | Date: Wed Jul 4 22:30:50 2007 -0500 | |
| 1945 | ||
| 1946 | include/configs: Use new CONFIG_CMD_* in TQM board config files. | |
| 1947 | ||
| 1948 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1949 | ||
| 1950 | commit 1cc4c458329765b58e584a19821e796b3c10e976 | |
| 1951 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1952 | Date: Wed Jul 4 22:30:28 2007 -0500 | |
| 1953 | ||
| 1954 | include/configs: Use new CONFIG_CMD_* in 82xx board config files. | |
| 1955 | ||
| 1956 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1957 | ||
| 1958 | commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e | |
| 1959 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1960 | Date: Wed Jul 4 22:30:06 2007 -0500 | |
| 1961 | ||
| 1962 | include/configs: Use new CONFIG_CMD_* in 83xx board config files. | |
| 1963 | ||
| 1964 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1965 | ||
| 5728be38 WD |
1966 | commit b44896215a09c60fa40cae906f7ed207bbc2c492 |
| 1967 | Author: Sergei Poselenov <sposelenov@emcraft.com> | |
| 1968 | Date: Thu Jul 5 08:17:37 2007 +0200 | |
| 1969 | ||
| 1970 | Merged POST framework with the current TOT. | |
| 1971 | ||
| 1972 | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> | |
| 1973 | ||
| b6b46845 WD |
1974 | commit b24629fa377214d63bb40d1360e354b6d3e4af56 |
| 1975 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1976 | Date: Wed Jun 13 13:23:15 2007 -0500 | |
| 1977 | ||
| 1978 | mpc86xx: Remove old CFG_CMD_* references. | |
| 1979 | ||
| 1980 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1981 | ||
| 1982 | commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a | |
| 1983 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1984 | Date: Wed Jun 13 13:22:54 2007 -0500 | |
| 1985 | ||
| 1986 | Add MPC8568MDS to MAKEALL 85xx target. | |
| 1987 | ||
| 1988 | It was missing from the original port submission. | |
| 1989 | ||
| 1990 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1991 | ||
| 1992 | commit 2835e518c969e5124ba1174eef3e8375e12fa7d5 | |
| 1993 | Author: Jon Loeliger <jdl@jdl.com> | |
| 1994 | Date: Wed Jun 13 13:22:08 2007 -0500 | |
| 1995 | ||
| 1996 | include/configs: Use new CONFIG_CMD_* in 85xx board config files. | |
| 1997 | ||
| 1998 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 1999 | ||
| 2000 | commit 56b304ac2091689506088a9ae67f63fd6300cf16 | |
| 2001 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2002 | Date: Wed Jun 13 13:21:37 2007 -0500 | |
| 2003 | ||
| 2004 | Fix #if typo in CONFIG_CMD_* changes. | |
| 2005 | ||
| 2006 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2007 | ||
| 5728be38 WD |
2008 | commit f780b83316d9af1f61d71cc88b1917b387b9b995 |
| 2009 | Author: Niklaus Giger <niklausgiger@gmx.ch> | |
| 2010 | Date: Wed Jun 27 18:11:38 2007 +0200 | |
| 2011 | ||
| 2012 | resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX | |
| 2013 | ||
| 2014 | Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> | |
| 2015 | ||
| 2016 | commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4 | |
| 2017 | Author: Stefan Roese <sr@denx.de> | |
| 2018 | Date: Wed Jul 4 10:06:30 2007 +0200 | |
| 2019 | ||
| 2020 | ppc4xx: Update lwmon5 board | |
| 2021 | ||
| 2022 | - Add optional ECC generation routine to preserve existing | |
| 2023 | RAM values. This is needed for the Linux log-buffer support | |
| 2024 | - Add optional DDR2 setup with CL=4 | |
| 2025 | - GPIO50 not used anymore | |
| 2026 | - Lime register setup added | |
| 2027 | ||
| 2028 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2029 | ||
| b6b46845 WD |
2030 | commit 6810a34677dbc446334f5e451f1682426dd33b49 |
| 2031 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2032 | Date: Tue Jul 3 00:17:28 2007 -0600 | |
| 2033 | ||
| 2034 | Fix Makefile to use $(MKCONFIG) macro for all board ports | |
| 2035 | ||
| 2036 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2037 | ||
| 2038 | commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926 | |
| 2039 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2040 | Date: Tue Jul 3 00:17:28 2007 -0600 | |
| 2041 | ||
| 2042 | Fix Makefile to use $(MKCONFIG) macro for all board ports | |
| 2043 | ||
| 2044 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2045 | ||
| 2046 | commit 057004f4a4863554d56cc56268bfa7c7d9738e27 | |
| 2047 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2048 | Date: Tue Jul 3 00:34:49 2007 -0600 | |
| 2049 | ||
| 2050 | Correct fixup relocation for mpc83xx | |
| 2051 | ||
| 2052 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2053 | ||
| 2054 | commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96 | |
| 2055 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2056 | Date: Tue Jul 3 00:34:44 2007 -0600 | |
| 2057 | ||
| 2058 | Correct fixup relocation for mpc8260 | |
| 2059 | ||
| 2060 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2061 | ||
| 2062 | commit f3a52fe05923935db86985daf9438e2f70ac39aa | |
| 2063 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2064 | Date: Tue Jul 3 00:34:39 2007 -0600 | |
| 2065 | ||
| 2066 | Correct fixup relocation for mpc824x | |
| 2067 | ||
| 2068 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2069 | ||
| 2070 | commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00 | |
| 2071 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2072 | Date: Tue Jul 3 00:34:34 2007 -0600 | |
| 2073 | ||
| 2074 | Correct fixup relocation for mpc8220 | |
| 2075 | ||
| 2076 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2077 | ||
| 2078 | commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90 | |
| 2079 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2080 | Date: Tue Jul 3 00:34:29 2007 -0600 | |
| 2081 | ||
| 2082 | Correct fixup relocation for MPC5xxx | |
| 2083 | ||
| 2084 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2085 | ||
| 2086 | commit 3649cd99ba815b6601868735765602f00ef3692b | |
| 2087 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2088 | Date: Tue Jul 3 00:34:24 2007 -0600 | |
| 2089 | ||
| 2090 | Correct relocation fixup for mpc5xx | |
| 2091 | ||
| 2092 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2093 | ||
| 2094 | commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325 | |
| 2095 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2096 | Date: Tue Jul 3 00:34:19 2007 -0600 | |
| 2097 | ||
| 2098 | Don't set gd->reloc_off if relocation of .fixup works correctly | |
| 2099 | ||
| 2100 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2101 | ||
| 2102 | commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28 | |
| 2103 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2104 | Date: Tue Jul 3 00:34:14 2007 -0600 | |
| 2105 | ||
| 2106 | Remove obsolete mpc83xx linker scripts | |
| 2107 | ||
| 2108 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2109 | ||
| 2110 | commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b | |
| 2111 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2112 | Date: Tue Jul 3 00:34:09 2007 -0600 | |
| 2113 | ||
| 2114 | Consolidate mpc8260 linker scripts | |
| 2115 | ||
| 2116 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2117 | ||
| 2118 | commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0 | |
| 2119 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2120 | Date: Tue Jul 3 00:34:04 2007 -0600 | |
| 2121 | ||
| 2122 | Remove obsolete mpc824x linker scripts | |
| 2123 | ||
| 2124 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2125 | ||
| 2126 | commit f94a3aecebc40ca0939c7d66d010009cf51be9e2 | |
| 2127 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2128 | Date: Tue Jul 3 00:33:59 2007 -0600 | |
| 2129 | ||
| 2130 | Remove obsolete mpc824x linker scripts (3 of 4) | |
| 2131 | ||
| 2132 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2133 | ||
| 2134 | commit a71c084f3ac7fedf144537db2b2da47323068833 | |
| 2135 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2136 | Date: Tue Jul 3 00:33:53 2007 -0600 | |
| 2137 | ||
| 2138 | Remove obsolete mpc824x linker scripts (2 of 4) | |
| 2139 | ||
| 2140 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2141 | ||
| 2142 | commit f670a15468d1365241d40022b9408e1004181f5e | |
| 2143 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2144 | Date: Tue Jul 3 00:33:48 2007 -0600 | |
| 2145 | ||
| 2146 | Remove obsolete mpc824x linker scripts (1 of 4) | |
| 2147 | ||
| 2148 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2149 | ||
| 2150 | commit 09555bd45a04c0e54f172528d21bc18896550d28 | |
| 2151 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2152 | Date: Tue Jul 3 00:33:43 2007 -0600 | |
| 2153 | ||
| 2154 | Remove obsolete mpc8220 linker scripts | |
| 2155 | ||
| 2156 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2157 | ||
| 2158 | commit 5efb992f046e51225c93d52f80fecbe433abd789 | |
| 2159 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2160 | Date: Tue Jul 3 00:33:38 2007 -0600 | |
| 2161 | ||
| 2162 | Remove obsolete mpc5xxx linker scripts (3 of 3) | |
| 2163 | ||
| 2164 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2165 | ||
| 2166 | commit 07c13dfef65b31647e69d8b61daa1eec598add1a | |
| 2167 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2168 | Date: Tue Jul 3 00:33:33 2007 -0600 | |
| 2169 | ||
| 2170 | Remove obsolete mpc5xxx linker scripts (2 of 3) | |
| 2171 | ||
| 2172 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2173 | ||
| 2174 | commit b4f67513a624ce85866c66c575bd2d9d7977d7f0 | |
| 2175 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2176 | Date: Tue Jul 3 00:33:28 2007 -0600 | |
| 2177 | ||
| 2178 | Remove obsolete mpc5xxx linker scripts (1 of 3) | |
| 2179 | ||
| 2180 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2181 | ||
| 2182 | commit b7d8e05f8675249b5f208aa73babeed384a4519d | |
| 2183 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2184 | Date: Tue Jul 3 00:33:23 2007 -0600 | |
| 2185 | ||
| 2186 | Remove obsolete mpc5xx linker scripts | |
| 2187 | ||
| 2188 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2189 | ||
| 2190 | commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7 | |
| 2191 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2192 | Date: Tue Jul 3 00:33:18 2007 -0600 | |
| 2193 | ||
| 2194 | Consolidate mpc83xx linker scripts | |
| 2195 | ||
| 2196 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2197 | ||
| 2198 | commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365 | |
| 2199 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2200 | Date: Tue Jul 3 00:33:13 2007 -0600 | |
| 2201 | ||
| 2202 | Consolidate mpc8260 linker scripts | |
| 2203 | ||
| 2204 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2205 | ||
| 2206 | commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207 | |
| 2207 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2208 | Date: Tue Jul 3 00:33:08 2007 -0600 | |
| 2209 | ||
| 2210 | Consolidate mpc824x linker scripts | |
| 2211 | ||
| 2212 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2213 | ||
| 2214 | commit 9c757b789a59a855db57b448dd825329c4e9c4a0 | |
| 2215 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2216 | Date: Tue Jul 3 00:33:03 2007 -0600 | |
| 2217 | ||
| 2218 | Consolidate mpc8220 linker scripts | |
| 2219 | ||
| 2220 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2221 | ||
| 2222 | commit d181c9a15cd41863fe24840d17848429f27d3c8c | |
| 2223 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2224 | Date: Tue Jul 3 00:32:58 2007 -0600 | |
| 2225 | ||
| 2226 | Consolidate mpc5xxx linker scripts | |
| 2227 | ||
| 2228 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2229 | ||
| 2230 | commit 287ac924adb7291bebe5086652a362a30ab28b13 | |
| 2231 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2232 | Date: Tue Jul 3 00:32:53 2007 -0600 | |
| 2233 | ||
| 2234 | Consolidate mpc5xx linker scripts | |
| 2235 | ||
| 2236 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 2237 | ||
| 2238 | commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd | |
| 2239 | Author: Wolfgang Denk <wd@denx.de> | |
| 2240 | Date: Wed Jul 4 00:43:53 2007 +0200 | |
| 2241 | ||
| 2242 | Fix a few file permission problems. | |
| 2243 | ||
| 2244 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 2245 | ||
| 2246 | commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c | |
| 2247 | Author: Wolfgang Denk <wd@denx.de> | |
| 2248 | Date: Wed Jul 4 00:38:38 2007 +0200 | |
| 2249 | ||
| 2250 | Minor coding style cleanup. Rebuild CHANGELOG file. | |
| 2251 | ||
| 78e0cf2d WD |
2252 | commit 2f9c19e496acb6bb50d9299e1aab377625d48c38 |
| 2253 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2254 | Date: Mon Jun 11 19:03:44 2007 -0500 | |
| 2255 | ||
| 2256 | configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style. | |
| 2257 | ||
| 2258 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2259 | ||
| 2260 | commit 602ad3b33d9ceef83dbab46be68646d645d637ee | |
| 2261 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2262 | Date: Mon Jun 11 19:03:39 2007 -0500 | |
| 2263 | ||
| 2264 | README: Rewrite command line config to use CONFIG_CMD_* names. | |
| 2265 | ||
| 2266 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2267 | ||
| 2268 | commit 72a074cec68e5bad60d63206c050974e08afd804 | |
| 2269 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2270 | Date: Mon Jun 11 19:03:34 2007 -0500 | |
| 2271 | ||
| 2272 | include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2273 | ||
| 2274 | This is a compatibility step that allows both the older form | |
| 2275 | and the new form to co-exist for a while until the older can | |
| 2276 | be removed entirely. | |
| 2277 | ||
| 2278 | All transformations are of the form: | |
| 2279 | Before: | |
| 2280 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2281 | After: | |
| 2282 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2283 | ||
| 2284 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2285 | ||
| 2286 | commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b | |
| 2287 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2288 | Date: Mon Jun 11 19:03:28 2007 -0500 | |
| 2289 | ||
| 2290 | tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2291 | ||
| 2292 | This is a compatibility step that allows both the older form | |
| 2293 | and the new form to co-exist for a while until the older can | |
| 2294 | be removed entirely. | |
| 2295 | ||
| 2296 | All transformations are of the form: | |
| 2297 | Before: | |
| 2298 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2299 | After: | |
| 2300 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2301 | ||
| 2302 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2303 | ||
| 2304 | commit 9107ebe0d352420895ab69b715697bdebc8caf50 | |
| 2305 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2306 | Date: Mon Jun 11 19:03:23 2007 -0500 | |
| 2307 | ||
| 2308 | board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2309 | ||
| 2310 | This is a compatibility step that allows both the older form | |
| 2311 | and the new form to co-exist for a while until the older can | |
| 2312 | be removed entirely. | |
| 2313 | ||
| 2314 | All transformations are of the form: | |
| 2315 | Before: | |
| 2316 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2317 | After: | |
| 2318 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2319 | ||
| 2320 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2321 | ||
| 2322 | commit 5e378003d592ea828ec69d6defcd4de79096dd5c | |
| 2323 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2324 | Date: Mon Jun 11 19:03:19 2007 -0500 | |
| 2325 | ||
| 2326 | board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2327 | ||
| 2328 | This is a compatibility step that allows both the older form | |
| 2329 | and the new form to co-exist for a while until the older can | |
| 2330 | be removed entirely. | |
| 2331 | ||
| 2332 | All transformations are of the form: | |
| 2333 | Before: | |
| 2334 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2335 | After: | |
| 2336 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2337 | ||
| 2338 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2339 | ||
| 2340 | commit 737184114ec9c9e0ab94d6713536126073bd2472 | |
| 2341 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2342 | Date: Mon Jun 11 19:03:15 2007 -0500 | |
| 2343 | ||
| 2344 | cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2345 | ||
| 2346 | This is a compatibility step that allows both the older form | |
| 2347 | and the new form to co-exist for a while until the older can | |
| 2348 | be removed entirely. | |
| 2349 | ||
| 2350 | All transformations are of the form: | |
| 2351 | Before: | |
| 2352 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2353 | After: | |
| 2354 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2355 | ||
| 2356 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2357 | ||
| 2358 | commit f48070fe5fe440dfb5ee5268c920de70e48ea327 | |
| 2359 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2360 | Date: Mon Jun 11 19:03:08 2007 -0500 | |
| 2361 | ||
| 2362 | cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2363 | ||
| 2364 | This is a compatibility step that allows both the older form | |
| 2365 | and the new form to co-exist for a while until the older can | |
| 2366 | be removed entirely. | |
| 2367 | ||
| 2368 | All transformations are of the form: | |
| 2369 | Before: | |
| 2370 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2371 | After: | |
| 2372 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2373 | ||
| 2374 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2375 | ||
| 2376 | commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2 | |
| 2377 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2378 | Date: Mon Jun 11 19:03:03 2007 -0500 | |
| 2379 | ||
| 2380 | lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2381 | ||
| 2382 | This is a compatibility step that allows both the older form | |
| 2383 | and the new form to co-exist for a while until the older can | |
| 2384 | be removed entirely. | |
| 2385 | ||
| 2386 | All transformations are of the form: | |
| 2387 | Before: | |
| 2388 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2389 | After: | |
| 2390 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2391 | ||
| 2392 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2393 | ||
| 2394 | commit 73f032021ec5f13cda8faa4e34b6de80960eb86f | |
| 2395 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2396 | Date: Mon Jun 11 19:02:58 2007 -0500 | |
| 2397 | ||
| 2398 | lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2399 | ||
| 2400 | This is a compatibility step that allows both the older form | |
| 2401 | and the new form to co-exist for a while until the older can | |
| 2402 | be removed entirely. | |
| 2403 | ||
| 2404 | All transformations are of the form: | |
| 2405 | Before: | |
| 2406 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2407 | After: | |
| 2408 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2409 | ||
| 2410 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2411 | ||
| 2412 | commit 98b79003c21c2578206003256de4e781d6b36ca8 | |
| 2413 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2414 | Date: Mon Jun 11 19:02:53 2007 -0500 | |
| 2415 | ||
| 2416 | rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2417 | ||
| 2418 | This is a compatibility step that allows both the older form | |
| 2419 | and the new form to co-exist for a while until the older can | |
| 2420 | be removed entirely. | |
| 2421 | ||
| 2422 | All transformations are of the form: | |
| 2423 | Before: | |
| 2424 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2425 | After: | |
| 2426 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2427 | ||
| 2428 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2429 | ||
| 2430 | commit 6e2115acb6a892d53a6881bf253ae41d3df39156 | |
| 2431 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2432 | Date: Mon Jun 11 19:02:49 2007 -0500 | |
| 2433 | ||
| 2434 | net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2435 | ||
| 2436 | This is a compatibility step that allows both the older form | |
| 2437 | and the new form to co-exist for a while until the older can | |
| 2438 | be removed entirely. | |
| 2439 | ||
| 2440 | All transformations are of the form: | |
| 2441 | Before: | |
| 2442 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2443 | After: | |
| 2444 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2445 | ||
| 2446 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2447 | ||
| 2448 | commit 45cdb9b72c94655c7308b464a2666057c0b286e0 | |
| 2449 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2450 | Date: Mon Jun 11 19:02:34 2007 -0500 | |
| 2451 | ||
| 2452 | disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2453 | ||
| 2454 | This is a compatibility step that allows both the older form | |
| 2455 | and the new form to co-exist for a while until the older can | |
| 2456 | be removed entirely. | |
| 2457 | ||
| 2458 | All transformations are of the form: | |
| 2459 | Before: | |
| 2460 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2461 | After: | |
| 2462 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2463 | ||
| 2464 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2465 | ||
| 2466 | commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a | |
| 2467 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2468 | Date: Mon Jun 11 19:02:20 2007 -0500 | |
| 2469 | ||
| 2470 | fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2471 | ||
| 2472 | This is a compatibility step that allows both the older form | |
| 2473 | and the new form to co-exist for a while until the older can | |
| 2474 | be removed entirely. | |
| 2475 | ||
| 2476 | All transformations are of the form: | |
| 2477 | Before: | |
| 2478 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2479 | After: | |
| 2480 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2481 | ||
| 2482 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2483 | ||
| 2484 | commit d5be43de93ff905c465e509d45a3164ef48d26e7 | |
| 2485 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2486 | Date: Mon Jun 11 19:02:10 2007 -0500 | |
| 2487 | ||
| 2488 | drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2489 | ||
| 2490 | This is a compatibility step that allows both the older form | |
| 2491 | and the new form to co-exist for a while until the older can | |
| 2492 | be removed entirely. | |
| 2493 | ||
| 2494 | All transformations are of the form: | |
| 2495 | Before: | |
| 2496 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2497 | After: | |
| 2498 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2499 | ||
| 2500 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2501 | ||
| 2502 | commit b453960d4fdb87b3970d96119b90df2ed024fc4a | |
| 2503 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2504 | Date: Mon Jun 11 19:02:05 2007 -0500 | |
| 2505 | ||
| 2506 | common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2507 | ||
| 2508 | This is a compatibility step that allows both the older form | |
| 2509 | and the new form to co-exist for a while until the older can | |
| 2510 | be removed entirely. | |
| 2511 | ||
| 2512 | All transformations are of the form: | |
| 2513 | Before: | |
| 2514 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2515 | After: | |
| 2516 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2517 | ||
| 2518 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2519 | ||
| 2520 | commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0 | |
| 2521 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2522 | Date: Mon Jun 11 19:01:54 2007 -0500 | |
| 2523 | ||
| 2524 | common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2525 | ||
| 2526 | This is a compatibility step that allows both the older form | |
| 2527 | and the new form to co-exist for a while until the older can | |
| 2528 | be removed entirely. | |
| 2529 | ||
| 2530 | All transformations are of the form: | |
| 2531 | Before: | |
| 2532 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2533 | After: | |
| 2534 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2535 | ||
| 2536 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2537 | ||
| 2538 | commit a76adc8142c1d956385a109e0b70f9319ede4d66 | |
| 2539 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2540 | Date: Mon Jun 11 19:01:43 2007 -0500 | |
| 2541 | ||
| 2542 | common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). | |
| 2543 | ||
| 2544 | This is a compatibility step that allows both the older form | |
| 2545 | and the new form to co-exist for a while until the older can | |
| 2546 | be removed entirely. | |
| 2547 | ||
| 2548 | All transformations are of the form: | |
| 2549 | Before: | |
| 2550 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) | |
| 2551 | After: | |
| 2552 | #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) | |
| 2553 | ||
| 2554 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 2555 | ||
| 2556 | commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1 | |
| 2557 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2558 | Date: Mon Jun 11 19:01:34 2007 -0500 | |
| 2559 | ||
| 2560 | Introduce initial versions of new Command Config files. | |
| 2561 | ||
| 2562 | Derive three new files from cmd_confdefs.h: | |
| 2563 | config_bootp.h - Has BOOTP related config options, not commands | |
| 2564 | config_cmd_all.h - Has a CONFIG_CMD_* definition for every command | |
| 2565 | config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds. | |
| 2566 | ||
| 2567 | For now, include "config_bootp.h" for compatability until all | |
| 2568 | users of it directly include it properly. | |
| 2569 | ||
| 2570 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4ef218f6 WD |
2571 | |
| 2572 | commit 1f2a05898658900dc5717761e27abf2052e67e13 | |
| 2573 | Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in> | |
| 2574 | Date: Sat Jun 30 18:50:48 2007 +0200 | |
| 2575 | ||
| 2576 | Fix S-ATA support. | |
| 2577 | ||
| 2578 | Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in> | |
| 2579 | ||
| 2580 | commit a5d71e290f3673269be8eefb4ec44f53412f9461 | |
| 2581 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 2582 | Date: Mon Jun 25 19:11:37 2007 +0200 | |
| 2583 | ||
| 2584 | [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG | |
| 2585 | ||
| 2586 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 2587 | ||
| 2588 | commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b | |
| 2589 | Author: Niklaus Giger <niklaus.giger@nestal.com> | |
| 2590 | Date: Mon Jun 25 17:03:13 2007 +0200 | |
| 2591 | ||
| 2592 | ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt | |
| 2593 | ||
| 2594 | This patch prints the DDR status registers upon machine check | |
| 2595 | interrupt on the 440EPx/GRx. This can be useful especially when | |
| 2596 | ECC support is enabled. | |
| 2597 | ||
| 2598 | I added some small changes to the original patch from Niklaus to | |
| 2599 | make it compile clean. | |
| 2600 | ||
| 2601 | Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> | |
| 2602 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2603 | ||
| 2604 | commit 807018fb7faceb429ce0cb47baa2073746b33a4e | |
| 2605 | Author: Niklaus Giger <niklaus.giger@nestal.com> | |
| 2606 | Date: Mon Jun 25 16:50:55 2007 +0200 | |
| 2607 | ||
| 2608 | ppc4xx: Fix O=buildir builds | |
| 2609 | ||
| 2610 | This patch fixes the problem to assemble cpu/ppc4xx/start.S | |
| 2611 | experienced last week where building failed having specified | |
| 2612 | O=../build.sequoia. | |
| 2613 | ||
| 2614 | Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com> | |
| 2615 | ||
| 2616 | commit 466fff1a7bb5fe764a06450626f6098219f446b8 | |
| 2617 | Author: Stefan Roese <sr@denx.de> | |
| 2618 | Date: Mon Jun 25 15:57:39 2007 +0200 | |
| 2619 | ||
| 2620 | ppc4xx: Add pci_pre_init() for 405 boards | |
| 2621 | ||
| 2622 | This patch removes the CFG_PCI_PRE_INIT option completely, since | |
| 2623 | it's not needed anymore with the patch from Matthias Fuchs with | |
| 2624 | the "weak" pci_pre_init() implementation. | |
| 2625 | ||
| 2626 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2627 | ||
| 2628 | commit 6f35c53166213c24a5a0e2390ed861136ff73870 | |
| 2629 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 2630 | Date: Sun Jun 24 17:41:21 2007 +0200 | |
| 2631 | ||
| 2632 | ppc4xx: Maintenance patch for esd's CPCI405 derivats | |
| 2633 | ||
| 2634 | -add pci_pre_init() for pci interrupt fixup code | |
| 2635 | -disable phy sleep mode via reset_phy() function | |
| 2636 | -use correct io accessors | |
| 2637 | -cleanup | |
| 2638 | ||
| 2639 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 2640 | ||
| 2641 | commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8 | |
| 2642 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 2643 | Date: Sun Jun 24 17:23:41 2007 +0200 | |
| 2644 | ||
| 2645 | ppc4xx: Add pci_pre_init() for 405 boards | |
| 2646 | ||
| 2647 | This patch adds support for calling a plattform dependant | |
| 2648 | pci_pre_init() function for 405 boards. This can be used to | |
| 2649 | move the current pci_405gp_fixup_irq() function into the | |
| 2650 | board code. | |
| 2651 | ||
| 2652 | This patch also makes the CFG_PCI_PRE_INIT define obsolete. | |
| 2653 | A default function with 'weak' attribute is used when | |
| 2654 | a board specific pci_pre_init() is not implemented. | |
| 2655 | ||
| 2656 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 2657 | ||
| 2658 | commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb | |
| 2659 | Author: Wolfgang Denk <wd@denx.de> | |
| 2660 | Date: Fri Jun 22 23:59:00 2007 +0200 | |
| 2661 | ||
| 2662 | Coding stylke cleanup; rebuild CHANGELOG | |
| 2663 | ||
| 1636d1c8 WD |
2664 | commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9 |
| 2665 | Author: Igor Lisitsin <igor@emcraft.com> | |
| 2666 | Date: Wed Apr 18 14:55:19 2007 +0400 | |
| 2667 | ||
| 2668 | Adapt log buffer code to support Linux 2.6 | |
| 2669 | ||
| 2670 | A new environment variable, "logversion", selects the log buffer | |
| 2671 | behaviour. If it is not set or set to a value other than 2, then the | |
| 2672 | old, Linux 2.4.4, behaviour is selected. | |
| 2673 | ||
| 2674 | Signed-off-by: Igor Lisitsin <igor@emcraft.com> | |
| 2675 | -- | |
| 2676 | ||
| 2677 | commit a11e06965ec91270c51853407ff1261d3c740386 | |
| 2678 | Author: Igor Lisitsin <igor@emcraft.com> | |
| 2679 | Date: Wed Mar 28 19:06:19 2007 +0400 | |
| 2680 | ||
| 2681 | Extend POST support for PPC440 | |
| 2682 | ||
| 2683 | Added memory, CPU, UART, I2C and SPR POST tests for PPC440. | |
| 2684 | ||
| 2685 | Signed-off-by: Igor Lisitsin <igor@emcraft.com> | |
| 2686 | -- | |
| 2687 | ||
| 4ef218f6 WD |
2688 | commit 566a494f592ae3b3c0785d90d4e1ba45574880c4 |
| 2689 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 2690 | Date: Fri Jun 22 19:11:54 2007 +0200 | |
| 2691 | ||
| 2692 | [PCS440EP] upgrade the PCS440EP board: | |
| 2693 | - Show on the Status LEDs, some States of the board. | |
| 2694 | - Get the MAC addresses from the EEProm | |
| 2695 | - use PREBOOT | |
| 2696 | - use the CF on the board. | |
| 2697 | - check the U-Boot image in the Flash with a SHA1 | |
| 2698 | checksum. | |
| 2699 | - use dynamic TLB entries generation for the SDRAM | |
| 2700 | ||
| 2701 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 2702 | ||
| 2703 | commit 3a1f5c81b0b9557817a789bece839905581c2205 | |
| 2704 | Author: Stefan Roese <sr@denx.de> | |
| 2705 | Date: Fri Jun 22 16:58:40 2007 +0200 | |
| 2706 | ||
| 2707 | ppc4xx: Fix problem with extended program_tlb() funtion | |
| 2708 | ||
| 2709 | The recently extended program_tlb() function had a problem when | |
| 2710 | multiple TLB's had to be setup (for example with 512MB of SDRAM). The | |
| 2711 | virtual address was not incremented. This patch fixes this issue | |
| 2712 | and is tested on Katmai with 512MB SDRAM. | |
| 2713 | ||
| 2714 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2715 | ||
| 1636d1c8 WD |
2716 | commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f |
| 2717 | Author: Rafal Jaworowski <raj@semihalf.com> | |
| 2718 | Date: Fri Jun 22 14:58:04 2007 +0200 | |
| 2719 | ||
| 2720 | [ppc] Fix build breakage for all non-4xx PowerPC variants. | |
| 2721 | ||
| 2722 | - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros | |
| 2723 | - minor 4xx cleanup | |
| 2724 | ||
| 2725 | commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b | |
| 2726 | Author: Wolfgang Denk <wd@denx.de> | |
| 2727 | Date: Wed Jun 20 18:14:24 2007 +0200 | |
| 2728 | ||
| 2729 | Coding style cleanup. Refresh CHANGELOG. | |
| 2730 | ||
| 83b4cfa3 WD |
2731 | commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024 |
| 2732 | Author: Stefan Roese <sr@denx.de> | |
| 2733 | Date: Tue Jun 19 17:22:44 2007 +0200 | |
| 2734 | ||
| 2735 | ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board | |
| 2736 | ||
| 2737 | This patch adds a board command to configure the I2C bootstrap EEPROM | |
| 2738 | values. Right now 533 and 667MHz are supported for booting either via NOR | |
| 2739 | or NAND FLASH. Here the usage: | |
| 2740 | ||
| 2741 | => bootstrap 533 nor ;to configure the board for 533MHz NOR booting | |
| 2742 | => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting | |
| 2743 | ||
| 2744 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2745 | ||
| 2746 | commit df8a24cdd30151505cf57bbee5289e91bf53bd1b | |
| 2747 | Author: Stefan Roese <sr@denx.de> | |
| 2748 | Date: Tue Jun 19 16:42:31 2007 +0200 | |
| 2749 | ||
| 2750 | [ppc4xx] Fix problem with NAND booting on AMCC Acadia | |
| 2751 | ||
| 2752 | The latest changes showed a problem with the location of the NAND-SPL | |
| 2753 | image in the OCM and the init-data area (incl. cache). This patch | |
| 2754 | fixes this problem. | |
| 2755 | ||
| 2756 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2757 | ||
| 2758 | commit 86ba99e34194394052d24c04dc40d1263d29a26f | |
| 2759 | Author: Stefan Roese <sr@denx.de> | |
| 2760 | Date: Tue Jun 19 16:40:58 2007 +0200 | |
| 2761 | ||
| 2762 | [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c | |
| 2763 | ||
| 2764 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2765 | ||
| 2766 | commit e73846b7cf1e29ae635bf9bb5570269663df2ee5 | |
| 2767 | Author: Stefan Roese <sr@denx.de> | |
| 2768 | Date: Fri Jun 15 11:33:41 2007 +0200 | |
| 2769 | ||
| 2770 | [ppc4xx] Change lwmon5 port to work with recent 440 exception rework | |
| 2771 | ||
| 2772 | Now CONFIG_440 has to be defined in all PPC440 board config files. | |
| 2773 | ||
| 2774 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2775 | ||
| 2776 | commit efa35cf12d914d4caba942acd5a6c45f217de302 | |
| 2777 | Author: Grzegorz Bernacki <gjb@semihalf.com> | |
| 2778 | Date: Fri Jun 15 11:19:28 2007 +0200 | |
| 2779 | ||
| 2780 | ppc4xx: Clean up 440 exceptions handling | |
| 2781 | ||
| 2782 | - Introduced dedicated switches for building 440 and 405 images required | |
| 2783 | for 440-specific machine instructions like 'rfmci' etc. | |
| 2784 | ||
| 2785 | - Exception vectors moved to the proper location (_start moved away from | |
| 2786 | the critical exception handler space, which it occupied) | |
| 2787 | ||
| 2788 | - CriticalInput now serviced (with default handler) | |
| 2789 | ||
| 2790 | - MachineCheck properly serviced (added a dedicated handler and return | |
| 2791 | subroutine) | |
| 2792 | ||
| 2793 | - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, | |
| 2794 | unhandled and those not relevant for 4xx were eliminated) | |
| 2795 | ||
| 2796 | - Eliminated Linux leftovers, removed dead code | |
| 2797 | ||
| 2798 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> | |
| 2799 | Signed-off-by: Rafal Jaworowski <raj@semihalf.com> | |
| 2800 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2801 | ||
| 2802 | commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2 | |
| 2803 | Author: Stefan Roese <sr@denx.de> | |
| 2804 | Date: Fri Jun 15 08:18:01 2007 +0200 | |
| 2805 | ||
| 2806 | [ppc4xx] Add initial lwmon5 board support | |
| 2807 | ||
| 2808 | This patch adds initial support for the Liebherr lwmon5 board euqipped | |
| 2809 | with an AMCC 440EPx PowerPC. | |
| 2810 | ||
| 2811 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2812 | ||
| 2813 | commit 85f737376d5ff3d5f0d45a8b657686326d175307 | |
| 2814 | Author: Stefan Roese <sr@denx.de> | |
| 2815 | Date: Fri Jun 15 07:39:43 2007 +0200 | |
| 2816 | ||
| 2817 | [ppc4xx] Extend 44x GPIO setup with default output state | |
| 2818 | ||
| 2819 | The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup | |
| 2820 | is extended with the default GPIO output state (level). | |
| 2821 | ||
| 2822 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2823 | ||
| 2824 | commit dbca208518e5e7f01a6420588d1cd6e60db74c2b | |
| 2825 | Author: Stefan Roese <sr@denx.de> | |
| 2826 | Date: Thu Jun 14 11:14:32 2007 +0200 | |
| 2827 | ||
| 2828 | [ppc4xx] Extend program_tlb() with virtual & physical addresses | |
| 2829 | ||
| 2830 | Now program_tlb() allows to program a TLB (or multiple) with | |
| 2831 | different virtual and physical addresses. With this change, now one | |
| 2832 | physical region (e.g. SDRAM) can be mapped 2 times, once with caches | |
| 2833 | diabled and once with caches enabled. | |
| 2834 | ||
| 2835 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2836 | ||
| 2837 | commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88 | |
| 2838 | Author: Detlev Zundel <dzu@denx.de> | |
| 2839 | Date: Wed May 23 19:02:41 2007 +0200 | |
| 2840 | ||
| 2841 | Change 'repeatable' attribute of some commands to sensible values. | |
| 2842 | ||
| 2843 | Most prominently this changes 'erase' to be non-repeatable. | |
| 2844 | ||
| 2845 | Signed-off-by: Detlev Zundel <dzu@denx.de> | |
| 2846 | ||
| 2847 | commit 5afb202093f6a001797db92cf695b93a70ea9ab4 | |
| 2848 | Author: Detlev Zundel <dzu@denx.de> | |
| 2849 | Date: Wed May 23 18:47:48 2007 +0200 | |
| 2850 | ||
| 2851 | Fix 'run' not to continue after interrupted command | |
| 2852 | ||
| 2853 | Signed-off-by: Detlev Zundel <dzu@denx.de> | |
| 2854 | ||
| 9986bc3e WD |
2855 | commit 9b7464a2c88614e1061f509c48930a3d240d1a35 |
| 2856 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 2857 | Date: Mon Jun 11 15:14:24 2007 +0200 | |
| 2858 | ||
| 2859 | USB: This patch fix readl in ohci swap reg access. | |
| 2860 | ||
| 2861 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> | |
| 2862 | ||
| 83b4cfa3 WD |
2863 | commit 8f8416fada9faf94b9a92f21fe6000643cb521d5 |
| 2864 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 2865 | Date: Fri Jun 8 14:52:22 2007 +0200 | |
| 2866 | ||
| 2867 | TQM5200: Add Flat Device Tree support, update default env. accordingly. | |
| 2868 | ||
| 2869 | Signed-off-by: Jan Wrobel <wrr@semihalf.com> | |
| 2870 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 2871 | ||
| 2872 | commit 9045f33c023f698660a2e45d1b2194c0711abebc | |
| 2873 | Author: Wolfgang Denk <wd@denx.de> | |
| 2874 | Date: Fri Jun 8 10:24:58 2007 +0200 | |
| 2875 | ||
| 2876 | Fix config problems on SC3 board; make ide_reset_timeout work. | |
| 2877 | ||
| 2878 | commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b | |
| 2879 | Author: Benoît Monin <bmonin@adeneo.eu> | |
| 2880 | Date: Fri Jun 8 09:55:24 2007 +0200 | |
| 2881 | ||
| 2882 | [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE | |
| 2883 | ||
| 2884 | Set the correct value in GPIOx_TCR when configuring the gpio | |
| 2885 | with CFG_440_GPIO_TABLE. | |
| 2886 | ||
| 2887 | Signed-off-by: Benoit Monin <bmonin@adeneo.eu> | |
| 2888 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2889 | ||
| 2890 | commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 | |
| 2891 | Author: Wolfgang Denk <wd@denx.de> | |
| 2892 | Date: Wed Jun 6 16:26:56 2007 +0200 | |
| 2893 | ||
| 2894 | Coding Style cleanup; generate new CHANGELOG file. | |
| 2895 | ||
| 2896 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 2897 | ||
| 9986bc3e WD |
2898 | commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243 |
| 2899 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 2900 | Date: Wed Jun 6 11:49:44 2007 +0200 | |
| 2901 | ||
| 2902 | TRAB, USB: update trab board configuration for use of generic ohci driver | |
| 2903 | ||
| 2904 | commit dace45acd1c1357daa9322099d07c9a9e08b0024 | |
| 2905 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 2906 | Date: Wed Jun 6 11:49:43 2007 +0200 | |
| 2907 | ||
| 2908 | USB: ohci fixes and cleanup for ppc4xx and yosemite board. | |
| 2909 | ||
| 2910 | commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df | |
| 2911 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 2912 | Date: Wed Jun 6 11:49:43 2007 +0200 | |
| 2913 | ||
| 2914 | USB: ohci fixes and cleanup for mpc5xxx and IceCube board config | |
| 2915 | ||
| 2916 | commit fc43be478f2aa37ce38acd85355038866e4162af | |
| 2917 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 2918 | Date: Wed Jun 6 11:49:35 2007 +0200 | |
| 2919 | ||
| 2920 | USB/OHCI: endianness cleanup in the generic ohci driver | |
| 2921 | ||
| 725671cc WD |
2922 | commit c440bfe6d6d92d66478a7e84402b31f48413617b |
| 2923 | Author: Stefan Roese <sr@denx.de> | |
| 2924 | Date: Wed Jun 6 11:42:13 2007 +0200 | |
| 2925 | ||
| 2926 | ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board | |
| 2927 | ||
| 2928 | This patch adds NAND booting support for the AMCC Acadia eval board. | |
| 2929 | ||
| 2930 | Please make sure to configure jumper J7 to position 2-3 when booting | |
| 2931 | from NOR, and to position 1-2 when booting for NAND. | |
| 2932 | ||
| 2933 | I also added a board command to configure the I2C bootstrap EEPROM | |
| 2934 | values. Right now only 267MHz is support for booting either via NOR | |
| 2935 | or NAND FLASH. Here the usage: | |
| 2936 | ||
| 2937 | => bootstrap 267 nor ;to configure the board for 267MHz NOR booting | |
| 2938 | => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting | |
| 2939 | ||
| 2940 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 2941 | ||
| 9986bc3e WD |
2942 | commit 18135125f909948b85d1d6881ab4ac0efb4a1c58 |
| 2943 | Author: Rodolfo Giometti <giometti@linux.it> | |
| 2944 | Date: Wed Jun 6 10:08:14 2007 +0200 | |
| 2945 | ||
| 2946 | Files include/linux/byteorder/{big,little}_endian.h define | |
| 2947 | __BIG_ENDIAN and __LITTLE_ENDIAN. | |
| 2948 | ||
| 2949 | Signed-off-by: Rodolfo Giometti <giometti@linux.it> | |
| 2950 | ||
| 2951 | commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82 | |
| 2952 | Author: Zhang Wei <wei.zhang@freescale.com> | |
| 2953 | Date: Wed Jun 6 10:08:14 2007 +0200 | |
| 2954 | ||
| 2955 | Add USB PCI-OHCI, USB keyboard and event poll support to the | |
| 2956 | MPC8641HPCN board config file. | |
| 2957 | ||
| 2958 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> | |
| 2959 | ||
| 2960 | commit 4dae14ce8fbdf380017dc54f172218e7d2acc889 | |
| 2961 | Author: Zhang Wei <wei.zhang@freescale.com> | |
| 2962 | Date: Wed Jun 6 10:08:14 2007 +0200 | |
| 2963 | ||
| 2964 | USB PCI-OHCI, interrupt pipe and usb event poll support | |
| 2965 | ||
| 2966 | This patch added USB PCI-OHCI chips support, interrupt pipe support | |
| 2967 | and usb event poll support. For supporting the USB interrupt pipe, the | |
| 2968 | globe urb_priv is moved to purb in ed struct. Now, we can process | |
| 2969 | several urbs at one time. The interrupt pipe support codes are ported | |
| 2970 | from Linux kernel 2.4. | |
| 2971 | ||
| 2972 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> | |
| 2973 | ||
| 2974 | commit fdcfaa1b02268b2899e374b35adf936c911a47eb | |
| 2975 | Author: Zhang Wei <wei.zhang@freescale.com> | |
| 2976 | Date: Wed Jun 6 10:08:13 2007 +0200 | |
| 2977 | ||
| 2978 | USB event poll support | |
| 2979 | ||
| 2980 | This patch adds USB event poll support, which could be used in usbkbd | |
| 2981 | and other usb devices driver when the asynchronous interrupt | |
| 2982 | processing is supported. | |
| 2983 | ||
| 2984 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com | |
| 2985 | ||
| 2986 | commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e | |
| 2987 | Author: Rodolfo Giometti <giometti@linux.it> | |
| 2988 | Date: Wed Jun 6 10:08:12 2007 +0200 | |
| 2989 | ||
| 2990 | ISP116x: delay for crappy USB keys | |
| 2991 | ||
| 2992 | Using some (very) slow USB keys cause the USB host controller buffers | |
| 2993 | are not ready to be read by the CPU so we need an extra delay before | |
| 2994 | reading the USB storage data. | |
| 2995 | ||
| 2996 | Signed-off-by: Rodolfo Giometti <giometti@linux.it> | |
| 2997 | ||
| 2998 | commit 09444143670c9c2243cb7aba9f70b3713d33bed1 | |
| 2999 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 3000 | Date: Wed Jun 6 10:08:12 2007 +0200 | |
| 3001 | ||
| 3002 | Change duplicate usb_cpu_init_fail to usb_board_init_fail | |
| 3003 | ||
| 3004 | Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing | |
| 3005 | this out. | |
| 3006 | ||
| 3007 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> | |
| 3008 | ||
| 725671cc WD |
3009 | commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e |
| 3010 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 3011 | Date: Tue Jun 5 12:30:52 2007 -0500 | |
| 3012 | ||
| 3013 | mpc8641 image size cleanup | |
| 3014 | ||
| 3015 | e600 does not have a bootpg restriction. | |
| 3016 | Move the version string to beginning of image at fff00000. | |
| 3017 | Resetvec.S is not needed. | |
| 3018 | Update flash copy instructions. | |
| 3019 | Add tftpflash env variable | |
| 3020 | ||
| 3021 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 3022 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 3023 | ||
| 3024 | commit e3cbe1f93c5722f8ebbad468e30c069a2b511097 | |
| 3025 | Author: Benoît Monin <bmonin@adeneo.eu> | |
| 3026 | Date: Mon Jun 4 08:36:05 2007 +0200 | |
| 3027 | ||
| 3028 | [PATCH] Fix ppc4xx bootstrap letter displayed on startup | |
| 3029 | ||
| 3030 | The attached patch is mainly cosmetic, allowing u-boot to | |
| 3031 | display the correct bootstrap option letter according to the | |
| 3032 | datasheets. | |
| 3033 | ||
| 3034 | The original patch was extended with 405EZ support by Stefan | |
| 3035 | Roese. | |
| 3036 | ||
| 3037 | Signed-off-by: Benoit Monin <bmonin@adeneo.eu> | |
| 3038 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3039 | ||
| 9986bc3e WD |
3040 | commit 5b1313fb2758ffce8b624457f777d8cc6709608d |
| 3041 | Author: Nikita V. Youshchenko <yoush@debian.org> | |
| 3042 | Date: Wed May 23 12:45:19 2007 +0400 | |
| 3043 | ||
| 3044 | fix compilation problem for mpc8349itx CFG_RAMBOOT | |
| 3045 | ||
| 3046 | Current include/configs/MPC8349ITX.h does contain some support for building | |
| 3047 | image that will be started from memory (without putting in into flash). | |
| 3048 | It could be triggered by building with TEXT_BASE set to a low value. | |
| 3049 | ||
| 3050 | However, this support is incomplete: using of low TEXT_BASE causes | |
| 3051 | defining configuration macros in inconsistent way, which later leads | |
| 3052 | to compilation errors. In particular. flash support is being disabled, | |
| 3053 | but then flash structures get referenced. | |
| 3054 | ||
| 3055 | This patch fixes this, making it possible to build with low TEXT_BASE. | |
| 3056 | ||
| 3057 | Signed-Off-By: Nikita Youshchenko <yoush@debian.org> | |
| 3058 | ||
| 3059 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 3060 | ||
| 3061 | commit 8a364f0970de49949d635e60accf463c6443ef8c | |
| 3062 | Author: Nikita V. Youshchenko <yoush@debian.org> | |
| 3063 | Date: Wed May 23 12:45:25 2007 +0400 | |
| 3064 | ||
| 3065 | add missing 'console' var to default mpc8349itx config | |
| 3066 | ||
| 3067 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 3068 | ||
| 725671cc WD |
3069 | commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7 |
| 3070 | Author: Stefan Roese <sr@denx.de> | |
| 3071 | Date: Fri Jun 1 16:18:17 2007 +0200 | |
| 3072 | ||
| 3073 | ppc4xx: Add missing file for Bamboo NAND booting support | |
| 3074 | ||
| 3075 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3076 | ||
| 3077 | commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b | |
| 3078 | Author: Stefan Roese <sr@denx.de> | |
| 3079 | Date: Fri Jun 1 15:58:19 2007 +0200 | |
| 3080 | ||
| 3081 | ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz | |
| 3082 | ||
| 3083 | This patch undoes the patch by Jeff Mann with commit-id ada4697d. As | |
| 3084 | suggested by AMCC it is not recommended to dynamically change the EBC | |
| 3085 | speed after bootup. So we undo this change to be on the safe side. | |
| 3086 | ||
| 3087 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3088 | ||
| 3089 | commit 9d9096043e8f713d4bf1743d32e1459e6a11644b | |
| 3090 | Author: Stefan Roese <sr@denx.de> | |
| 3091 | Date: Fri Jun 1 15:29:04 2007 +0200 | |
| 3092 | ||
| 3093 | ppc4xx: Update Sequoia NAND booting support with ECC | |
| 3094 | ||
| 3095 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3096 | ||
| 3097 | commit cf959c7d6687567c308e366e9581e1a5aff5cc5b | |
| 3098 | Author: Stefan Roese <sr@denx.de> | |
| 3099 | Date: Fri Jun 1 15:27:11 2007 +0200 | |
| 3100 | ||
| 3101 | ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board | |
| 3102 | ||
| 3103 | This patch adds NAND booting support for the AMCC Bamboo eval board. | |
| 3104 | Since the NAND-SPL boot image is limited to 4kbytes, this version | |
| 3105 | only supports the onboard 64MBytes of DDR. The DIMM modules can't be | |
| 3106 | supported, since the setup code for I2C DIMM autodetection and | |
| 3107 | configuration is too big for this NAND bootloader. | |
| 3108 | ||
| 3109 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3110 | ||
| 3111 | commit 42be56f53c8b107868e6125c8524ae84293e95a7 | |
| 3112 | Author: Stefan Roese <sr@denx.de> | |
| 3113 | Date: Fri Jun 1 15:23:04 2007 +0200 | |
| 3114 | ||
| 3115 | NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c | |
| 3116 | ||
| 3117 | The U-Boot NAND booting support is now extended to support ECC | |
| 3118 | upon loading of the NAND U-Boot image. | |
| 3119 | ||
| 3120 | Tested on AMCC Sequoia (440EPx) and Bamboo (440EP). | |
| 3121 | ||
| 3122 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3123 | ||
| 3124 | commit a471db07fbb65a841ffc9f4f112562b945230f98 | |
| 3125 | Author: Stefan Roese <sr@denx.de> | |
| 3126 | Date: Fri Jun 1 15:19:29 2007 +0200 | |
| 3127 | ||
| 3128 | ppc4xx: Prepare Bamboo port for NAND booting support | |
| 3129 | ||
| 3130 | This patch updates the "normal" Bamboo NOR booting port, so | |
| 3131 | that it is compatible with the coming soon NAND booting | |
| 3132 | Bamboo port. | |
| 3133 | ||
| 3134 | It also enables the 2nd NAND flash on the Bamboo. | |
| 3135 | ||
| 3136 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3137 | ||
| 3138 | commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987 | |
| 3139 | Author: Stefan Roese <sr@denx.de> | |
| 3140 | Date: Fri Jun 1 15:16:58 2007 +0200 | |
| 3141 | ||
| 3142 | ppc4xx: Update in_be32() functions and friends to latest Linux version | |
| 3143 | ||
| 3144 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3145 | ||
| 3146 | commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c | |
| 3147 | Author: Stefan Roese <sr@denx.de> | |
| 3148 | Date: Fri Jun 1 15:15:12 2007 +0200 | |
| 3149 | ||
| 3150 | NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c | |
| 3151 | ||
| 3152 | This patch adds hardware ECC support to the NDFC driver. It also | |
| 3153 | changes the register access from using the "simple" in32/out32 | |
| 3154 | functions to the in_be32/out_be32 functions, which make sure | |
| 3155 | that the access is correctly synced. This is the only recommended | |
| 3156 | access to SoC registers in the current Linux kernel. | |
| 3157 | ||
| 3158 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3159 | ||
| 3160 | commit 17b5e862287cca76f19dcf8b741e61a7d06617f2 | |
| 3161 | Author: Stefan Roese <sr@denx.de> | |
| 3162 | Date: Fri Jun 1 15:12:15 2007 +0200 | |
| 3163 | ||
| 3164 | NAND: Update nand_ecc.c to latest Linux version | |
| 3165 | ||
| 3166 | This patch updates the nand_ecc code to the latest Linux version. | |
| 3167 | The main reason for this is the more compact code. This makes | |
| 3168 | it possible to include the ECC code into the NAND bootloader | |
| 3169 | image (NAND_SPL) for PPC4xx. | |
| 3170 | ||
| 3171 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3172 | ||
| 3173 | commit d2d432760d2199d0e8558fdd9d1789b8131abcf7 | |
| 3174 | Author: Stefan Roese <sr@denx.de> | |
| 3175 | Date: Fri Jun 1 15:09:50 2007 +0200 | |
| 3176 | ||
| 3177 | ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo | |
| 3178 | ||
| 3179 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3180 | ||
| 3181 | commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc | |
| 3182 | Author: Stefan Roese <sr@denx.de> | |
| 3183 | Date: Fri Jun 1 13:45:24 2007 +0200 | |
| 3184 | ||
| 3185 | ppc4xx: Change Luan config file to support ECC | |
| 3186 | ||
| 3187 | With the updated 44x DDR2 driver the Luan board now supports | |
| 3188 | ECC generation and checking. | |
| 3189 | ||
| 3190 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3191 | ||
| 3192 | commit 7187db73491c8de0fb56efb5e5134ba5ec443089 | |
| 3193 | Author: Stefan Roese <sr@denx.de> | |
| 3194 | Date: Fri Jun 1 13:45:00 2007 +0200 | |
| 3195 | ||
| 3196 | ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) | |
| 3197 | ||
| 3198 | Add config option for 180 degree advance clock control as needed | |
| 3199 | for the AMCC Luan eval board. | |
| 3200 | ||
| 3201 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3202 | ||
| 3203 | commit ee1529838abbfaa35f14e3ffbeaaba693159475f | |
| 3204 | Author: Wolfgang Denk <wd@denx.de> | |
| 3205 | Date: Thu May 31 17:20:09 2007 +0200 | |
| 3206 | ||
| 3207 | Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. | |
| 3208 | ||
| 3209 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 3210 | ||
| 3211 | commit 7049288fb1f16f1b317140226cdebd07bd416395 | |
| 3212 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3213 | Date: Sun May 27 17:26:46 2007 +0200 | |
| 3214 | ||
| 3215 | Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. | |
| 3216 | ||
| 3217 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3218 | ||
| 3219 | commit 4520fd4d2c450da49637216aa0e53739b61c60ac | |
| 3220 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3221 | Date: Sun May 27 17:06:36 2007 +0200 | |
| 3222 | ||
| 3223 | Motion-PRO: Add support for redundant environment. | |
| 3224 | ||
| 3225 | Enable redundant environment, add a MTD partition for it; also add env. | |
| 3226 | variable command for passing MTD partitions to the kernel command line. | |
| 3227 | ||
| 3228 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> | |
| 3229 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3230 | ||
| 3231 | commit a26eabeec31746f06d309103690892805696e344 | |
| 3232 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3233 | Date: Sun May 27 17:05:11 2007 +0200 | |
| 3234 | ||
| 3235 | Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes. | |
| 3236 | ||
| 3237 | Allow passing longer command line to the kernel - useful especially | |
| 3238 | for passing MTD partition layout. | |
| 3239 | ||
| 3240 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> | |
| 3241 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3242 | ||
| 3243 | commit 9160b96f71483a116de81c68985e8ee306d36764 | |
| 3244 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3245 | Date: Sun May 27 17:04:18 2007 +0200 | |
| 3246 | ||
| 3247 | Fix: Add missing NULL termination in strings expanded by macros parser. | |
| 3248 | ||
| 3249 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> | |
| 3250 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3251 | ||
| 3252 | commit 630ec84aef7228fc1dbfb38dec78541403a786cd | |
| 3253 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3254 | Date: Sun May 27 17:03:37 2007 +0200 | |
| 3255 | ||
| 3256 | Motion-PRO: Update EEPROM's page write bits and write delay. | |
| 3257 | ||
| 3258 | Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A | |
| 3259 | have a page write capability of two bytes", and "This device offers fast (1ms) | |
| 3260 | byte write". Add 3ms of extra delay. | |
| 3261 | ||
| 3262 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> | |
| 3263 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3264 | ||
| 3265 | commit c00125e07c1ebc125bab40e1e18bceed8be0c162 | |
| 3266 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3267 | Date: Sun May 27 16:58:45 2007 +0200 | |
| 3268 | ||
| 3269 | MPC5XXX, Motion-PRO: Fix PHY initialization problem. | |
| 3270 | ||
| 3271 | After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which | |
| 3272 | networking does not function. This commit switches PHY to TX mode by clearing | |
| 3273 | the FX_SEL bit of Mode Control Register. It also reverses commit | |
| 3274 | 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. | |
| 3275 | ||
| 3276 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> | |
| 3277 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3278 | ||
| 3279 | commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db | |
| 3280 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3281 | Date: Sun May 27 16:57:15 2007 +0200 | |
| 3282 | ||
| 3283 | Motion-PRO: Add support for the temperature sensor. | |
| 3284 | ||
| 3285 | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> | |
| 3286 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3287 | ||
| 3288 | commit c75e639630cc132dc19cd1ecda5922c0db0bfbba | |
| 3289 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3290 | Date: Sun May 27 16:55:23 2007 +0200 | |
| 3291 | ||
| 3292 | Motion-PRO: Add displaying of CPLD revision information during boot. | |
| 3293 | ||
| 3294 | Signed-off-by: Jan Wrobel <wrr@semihalf.com> | |
| 3295 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3296 | ||
| 3297 | commit c99512d6bd3973f01ca2fc4896d829b46e68f150 | |
| 3298 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3299 | Date: Sun May 27 16:53:43 2007 +0200 | |
| 3300 | ||
| 3301 | MPC5xxx: Change names of defines related to IPB and PCI clocks. | |
| 3302 | ||
| 3303 | Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining | |
| 3304 | them does not cause PCI or IPB clocks to run at the specified speed. | |
| 3305 | Instead, they configure divisors used to calculate said clocks. This | |
| 3306 | patch renames the defines according to their real function. | |
| 3307 | ||
| 3308 | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> | |
| 3309 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3310 | ||
| 3311 | commit a11c0b85dc3664bb3c1e781137118730c8f619ab | |
| 3312 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3313 | Date: Sun May 27 16:51:48 2007 +0200 | |
| 3314 | ||
| 3315 | Motion-PRO: Add LED support. | |
| 3316 | ||
| 3317 | Signed-off-by: Jan Wrobel <wrr@semihalf.com> | |
| 3318 | Signed-off-by: Marian Balakowicz <m8@semihalf.com> | |
| 3319 | Acked-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3320 | ||
| 3321 | commit d756894722c888d09a9fa1df8323753772d3dcce | |
| 3322 | Author: Stefan Roese <sr@denx.de> | |
| 3323 | Date: Thu May 24 09:49:00 2007 +0200 | |
| 3324 | ||
| 3325 | ppc4xx: Fix small 405EZ OCM initilization bug in start.S | |
| 3326 | ||
| 3327 | As pointed out by Bruce Adler <bruce.adler@acm.org> this patch | |
| 3328 | fixes a small bug in the 405EZ OCM initialization. Thanks for | |
| 3329 | spotting. | |
| 3330 | ||
| 3331 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3332 | ||
| 3333 | commit 5d4a179013d59a76446462e1eb0a969fba63eb81 | |
| 3334 | Author: Stefan Roese <sr@denx.de> | |
| 3335 | Date: Thu May 24 08:22:09 2007 +0200 | |
| 3336 | ||
| 3337 | ppc4xx: Update AMCC Acadia support for board revision 1.1 | |
| 3338 | ||
| 3339 | This patch updates the Acadia (405EZ) support for the new 1.1 board | |
| 3340 | revision. It also adds support for NAND FLASH via the 4xx NDFC. | |
| 3341 | ||
| 3342 | Please note that the jumper J7 must be in position 2-3 for this | |
| 3343 | NAND support. Position 1-2 is for NAND booting only. NAND booting | |
| 3344 | support will follow later. | |
| 3345 | ||
| 3346 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3347 | ||
| 4ef218f6 WD |
3348 | commit 822d55365bb557e084d0e33625a6dedcc866110b |
| 3349 | Author: Jon Loeliger <jdl@freescale.com> | |
| 3350 | Date: Wed May 23 14:09:46 2007 -0500 | |
| 3351 | ||
| 3352 | Add LIST_86xx MAKEALL target for PowerPC builds. | |
| 3353 | ||
| 3354 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 3355 | ||
| 725671cc WD |
3356 | commit 9f0077abd69f7a7c756a915b961037302be3e6f2 |
| 3357 | Author: Stefan Roese <sr@denx.de> | |
| 3358 | Date: Tue May 22 12:48:09 2007 +0200 | |
| 3359 | ||
| 3360 | ppc4xx: Use do { ... } while (0) for CPR & SDR access macros | |
| 3361 | ||
| 3362 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3363 | ||
| 3364 | commit 6f3dfc139a838b0841c151efe00ad47db2366e79 | |
| 3365 | Author: Stefan Roese <sr@denx.de> | |
| 3366 | Date: Tue May 22 12:46:10 2007 +0200 | |
| 3367 | ||
| 3368 | ppc4xx: Add 405 support to 4xx NAND driver ndfc.c | |
| 3369 | ||
| 3370 | This patch adds support for 405 PPC's to the 4xx NAND driver | |
| 3371 | ndfc.c. This is in preparation for the new AMCC 405EZ. | |
| 3372 | ||
| 3373 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3374 | ||
| 3375 | commit 10603d76767426be803dadd4fb688b97eb69481c | |
| 3376 | Author: Stefan Roese <sr@denx.de> | |
| 3377 | Date: Mon May 21 07:41:22 2007 +0200 | |
| 3378 | ||
| 3379 | ppc4xx: Fix problem in 405EZ OCM initialization | |
| 3380 | ||
| 3381 | As spotted by Bruce Adler this patch fixes an initialization problem | |
| 3382 | for the 405EZ OCM. | |
| 3383 | ||
| 3384 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3385 | ||
| 3386 | commit 3e3b956906eba9e4ad7931581ecedaad10eccce8 | |
| 3387 | Author: Peter Pearse <peter.pearse@arm.com> | |
| 3388 | Date: Fri May 18 16:47:03 2007 +0100 | |
| 3389 | ||
| 3390 | Reduce line lengths to 80 characters max. | |
| 3391 | ||
| 3392 | commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72 | |
| 3393 | Author: Peter Pearse <peter.pearse@arm.com> | |
| 3394 | Date: Fri May 18 14:34:07 2007 +0100 | |
| 3395 | ||
| 3396 | Makefile permissions | |
| 3397 | ||
| 3398 | commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d | |
| 3399 | Author: Peter Pearse <peter.pearse@arm.com> | |
| 3400 | Date: Fri May 18 14:33:11 2007 +0100 | |
| 3401 | ||
| 3402 | Makefile permissions | |
| 3403 | ||
| 4ef218f6 WD |
3404 | commit 255a3577c848706441daee0174543efe205a77f8 |
| 3405 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 3406 | Date: Wed May 16 16:52:19 2007 -0500 | |
| 3407 | ||
| 3408 | Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx | |
| 3409 | ||
| 3410 | For all practical u-boot purposes, TSECs don't differ throughout the | |
| 3411 | mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. | |
| 3412 | ||
| 3413 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 3414 | ||
| 725671cc WD |
3415 | commit 70124c2602ae2d4c5d3dba05b482d91548242de8 |
| 3416 | Author: Stefano Babic <sbabic@denx.de> | |
| 3417 | Date: Wed May 16 14:49:12 2007 +0200 | |
| 3418 | ||
| 3419 | Fix compile problem cause my Microblaze merge | |
| 3420 | ||
| 3421 | Signed-off-by: Stefano Babic <sbabic@denx.de> | |
| 3422 | ||
| 3423 | commit ada4697d0230d6da552867777f98a67ec3ba2579 | |
| 3424 | Author: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 3425 | Date: Wed May 16 13:23:10 2007 +0200 | |
| 3426 | ||
| 3427 | [PATCH] Run new sequoia boards with an EBC speed of 83MHz | |
| 3428 | ||
| 3429 | Because the Sequoia board does not boot with an EBC faster than 66MHz, | |
| 3430 | the clock divider are changed after the initial boot process. | |
| 3431 | ||
| 3432 | This allows for maximum clocking speeds to be achieved on newer boards. | |
| 3433 | Sequoia boards with 666.66 MHz processors require that the EBC divider | |
| 3434 | be set to 3 in order to start the initial boot process at a slower EBC | |
| 3435 | speed. After the initial boot process, the divider can be set back to 2, | |
| 3436 | which will cause the boards to run at 83.333MHz. This is backward | |
| 3437 | compatible with boards with 533.33 MHz processors, as these boards will | |
| 3438 | already be set with an EBC divider of 2. | |
| 3439 | ||
| 3440 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 3441 | ||
| 3442 | commit a7676ea7732f3c596805079fed7e5c9fac652cfc | |
| 3443 | Author: Wolfgang Denk <wd@denx.de> | |
| 3444 | Date: Wed May 16 01:16:53 2007 +0200 | |
| 3445 | ||
| 3446 | Minor Coding Style cleanup, update CHANGELOG. | |
| 3447 | ||
| 3448 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 3449 | ||
| a7676ea7 WD |
3450 | commit d62f64cc23a940eafe712c776b3249e4160753d1 |
| 3451 | Author: Wolfgang Denk <wd@denx.de> | |
| 3452 | Date: Wed May 16 00:13:33 2007 +0200 | |
| 3453 | ||
| 3454 | Coding Style Cleanup, new CHANGELOG | |
| 3455 | ||
| 4ef218f6 WD |
3456 | commit 3162eb836903c8b247fdc7470dd39bfa6996f495 |
| 3457 | Author: Wolfgang Denk <wd@denx.de> | |
| 3458 | Date: Tue May 15 23:38:05 2007 +0200 | |
| 3459 | ||
| 3460 | Minor coding style cleanup. | |
| 3461 | ||
| 3462 | commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e | |
| 3463 | Author: mushtaq khan <mushtaq_k@procsys.com> | |
| 3464 | Date: Fri Apr 20 14:23:02 2007 +0530 | |
| 3465 | ||
| 3466 | Add driver for S-ATA-controller on Intel processors with South | |
| 3467 | Bridge, ICH-5, ICH-6 and ICH-7. | |
| 3468 | ||
| 3469 | Implementation: | |
| 3470 | ||
| 3471 | 1. Code is divided in to two files. All functions, which are | |
| 3472 | controller specific are kept in "drivers/ata_piix.c" file and | |
| 3473 | functions, which are not controller specific, are kept in | |
| 3474 | "common/cmd_sata.c" file. | |
| 3475 | ||
| 3476 | 2. Reading and Writing from the S-ATA drive is done using PIO method. | |
| 3477 | ||
| 3478 | 3. Driver can be configured for 48-bit addressing by defining macro | |
| 3479 | CONFIG_LBA48, if this macro is not defined driver uses the 28-bit | |
| 3480 | addressing. | |
| 3481 | ||
| 3482 | 4. S-ATA read function is hooked to the File system, commands like | |
| 3483 | ext2ls and ext2load file can be used. This has been tested. | |
| 3484 | ||
| 3485 | 5. U-Boot command "SATA_init" is added, which initializes the S-ATA | |
| 3486 | controller and identifies the S-ATA drives connected to it. | |
| 3487 | ||
| 3488 | 6. U-Boot command "sata" is added, which is used to read/write, print | |
| 3489 | partition table and get info about the drives present. This I have | |
| 3490 | implemented in same way as "ide" command is implemented in U-Boot. | |
| 3491 | ||
| 3492 | 7. This driver is for S-ATA in native mode. | |
| 3493 | ||
| 3494 | 8. This driver does not support the Native command queuing and | |
| 3495 | Hot-plugging. | |
| 3496 | ||
| 3497 | Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> | |
| 3498 | ||
| 3499 | commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0 | |
| 3500 | Author: mushtaq khan <mushtaq_k@procsys.com> | |
| 3501 | Date: Mon Apr 30 15:57:22 2007 +0530 | |
| 3502 | ||
| 3503 | Fixes bug clearing the bss section for i386 | |
| 3504 | ||
| 3505 | Hi, | |
| 3506 | There is a bug in the code of clearing the bss section for processor | |
| 3507 | i386.(File: cpu/i386/start.S) | |
| 3508 | In the code, bss_start addr (starting addr of bss section) is put into | |
| 3509 | the register %eax, but the code which clears the bss section refers to | |
| 3510 | the addr pointed by %edi. | |
| 3511 | ||
| 3512 | This patch fixes this bug by putting bss_start into %edi register. | |
| 3513 | ||
| 3514 | Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com> | |
| 3515 | ||
| 3516 | commit c3243cf7b490057277d61acffe4ad0946f9eb4a4 | |
| 3517 | Author: Joe Hamman <joe.hamman@embeddedspecialties.com> | |
| 3518 | Date: Mon Apr 30 16:47:28 2007 -0500 | |
| 3519 | ||
| 3520 | Add support for BCM5464 Quad Phy | |
| 3521 | ||
| 3522 | Added support for Broadcom's BCM5464 Quad Phy | |
| 3523 | ||
| 3524 | Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com> | |
| 3525 | ||
| 3526 | commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a | |
| 3527 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> | |
| 3528 | Date: Wed May 9 08:10:57 2007 +0800 | |
| 3529 | ||
| 3530 | Search the exception table with linear algorithm | |
| 3531 | ||
| 3532 | Search the exception table with linear algorithm instead of | |
| 3533 | bisecting algorithm. | |
| 3534 | Because the exception table might be unsorted. | |
| 3535 | ||
| 3536 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 3537 | ||
| 3538 | commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3 | |
| 3539 | Author: Aubrey.Li <aubrey.adi@gmail.com> | |
| 3540 | Date: Mon May 14 11:47:35 2007 +0800 | |
| 3541 | ||
| 3542 | Fix compilation issues on MACOSX | |
| 3543 | ||
| 3544 | Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com> | |
| 3545 | Signed-off-by: Aubrey Li <aubrey.adi@gmail.com> | |
| 3546 | ||
| 3547 | commit 56fd7162985c412317bbf763a225fba23c64fd31 | |
| 3548 | Author: Stephen Williams <steve@icarus.com> | |
| 3549 | Date: Tue May 15 07:55:42 2007 -0700 | |
| 3550 | ||
| 3551 | Fix for compile of JSE target | |
| 3552 | ||
| 3553 | The attached patch fixes the compile of the JSE board in the | |
| 3554 | denx git as of 14 may 2007. It is an extremely simple patch, | |
| 3555 | it just adds the missing define of CFG_SYSTEMACE_WIDTH. | |
| 3556 | ||
| 3557 | Fix to compile JSE against 20070514 git of u-boot | |
| 3558 | ||
| 725671cc WD |
3559 | commit 61936667e86a250ae12fd2dc189d3588f0a59e0b |
| 3560 | Author: Stefan Roese <sr@denx.de> | |
| 3561 | Date: Fri May 11 12:01:49 2007 +0200 | |
| 3562 | ||
| 3563 | ppc4xx: Add mtcpr/mfcpr access macros | |
| 3564 | ||
| 3565 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3566 | ||
| 3567 | commit 343c48bd84606c4025c8a7c7263fda465d6e284c | |
| 3568 | Author: Stefan Roese <sr@denx.de> | |
| 3569 | Date: Fri May 11 12:01:06 2007 +0200 | |
| 3570 | ||
| 3571 | ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too | |
| 3572 | ||
| 3573 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3574 | ||
| d62f64cc WD |
3575 | commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 |
| 3576 | Author: Piotr Kruszynski <ppk@semihalf.com> | |
| 3577 | Date: Thu May 10 16:55:52 2007 +0200 | |
| 3578 | ||
| 3579 | [Motion-PRO] Add MTD and JFFS2 support, also add default partition | |
| 3580 | definition. | |
| 3581 | ||
| 725671cc WD |
3582 | commit 65fb6a676e821f9570a2a376dc204bf611ce5f81 |
| 3583 | Author: Peter Pearse <peter.pearse@arm.com> | |
| 3584 | Date: Wed May 9 11:42:44 2007 +0100 | |
| 3585 | ||
| 3586 | Add the board directory for SMN42 | |
| 3587 | ||
| 3588 | commit 160131bf965785419626df6c388729fe0b597992 | |
| 3589 | Author: Peter Pearse <peter.pearse@arm.com> | |
| 3590 | Date: Wed May 9 11:41:58 2007 +0100 | |
| 3591 | ||
| 3592 | Add the files for the SMN42 board | |
| 3593 | ||
| 3594 | commit 5c6d2b5a500f8c49670de8910150b78a41f781fc | |
| 3595 | Author: Peter Pearse <peter.pearse@arm.com> | |
| 3596 | Date: Wed May 9 11:40:34 2007 +0100 | |
| 3597 | ||
| 3598 | Remove the deleted files for the SMN42 patch | |
| 3599 | ||
| 3600 | commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761 | |
| 3601 | Author: Peter Pearse <peter.pearse@arm.com> | |
| 3602 | Date: Wed May 9 11:37:56 2007 +0100 | |
| 3603 | ||
| 3604 | New board SMN42 branch | |
| 3605 | ||
| 3606 | commit 29f3be0caf0799ca6b89dfd9824c15619a50000f | |
| 3607 | Author: Peter Pearse <peter.pearse@arm.com> | |
| 3608 | Date: Wed May 9 10:24:38 2007 +0100 | |
| 3609 | ||
| 3610 | Makefile permissions | |
| 3611 | ||
| 3612 | commit b84289b595731e8851df46e893845cc1322c9b9b | |
| 3613 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 3614 | Date: Tue May 8 14:17:07 2007 -0500 | |
| 3615 | ||
| 3616 | 8641hpcn: Fix Makefile after moving pixis to board/freescale. | |
| 3617 | ||
| 3618 | The OBJTREE != SRCTREE build scenario was broken. | |
| 3619 | This fixes it. | |
| 3620 | ||
| 3621 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 3622 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 3623 | ||
| d62f64cc WD |
3624 | commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 |
| 3625 | Author: Michal Simek <monstr@monstr.eu> | |
| 3626 | Date: Tue May 8 15:57:43 2007 +0200 | |
| 3627 | ||
| 3628 | add: reading special purpose registers | |
| 3629 | ||
| 3630 | commit 1a50f164beb065f360fbddb76029607d6b099698 | |
| 3631 | Author: Michal Simek <monstr@monstr.eu> | |
| 3632 | Date: Tue May 8 14:52:52 2007 +0200 | |
| 3633 | ||
| 3634 | add: Microblaze V5 exception handling | |
| 3635 | ||
| 3636 | commit ab874d5047e5d30dbc1e517ff26083efffa98ecb | |
| 3637 | Author: Michal Simek <monstr@monstr.eu> | |
| 3638 | Date: Tue May 8 14:39:11 2007 +0200 | |
| 3639 | ||
| 3640 | add: FSL control read and write | |
| 3641 | ||
| 3642 | commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3 | |
| 3643 | Author: Piotr Kruszynski <ppk@semihalf.com> | |
| 3644 | Date: Tue May 8 13:05:44 2007 +0200 | |
| 3645 | ||
| 3646 | [Motion-PRO] Add support for I2C, EEPROM and RTC. | |
| 3647 | ||
| 3648 | commit fa5c2ba123b1bf88455bfc21db5e786ca045029d | |
| 3649 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3650 | Date: Tue May 8 10:23:56 2007 +0200 | |
| 3651 | ||
| 3652 | [Motion-PRO] Add ATA support. Add CF-booting commands to the default | |
| 3653 | environment. | |
| 3654 | ||
| 3655 | commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839 | |
| 3656 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3657 | Date: Tue May 8 09:39:12 2007 +0200 | |
| 3658 | ||
| 3659 | [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This | |
| 3660 | eliminates networking problems in Linux (timeouts). | |
| 3661 | ||
| 3662 | commit 1f1369c34b629be94702684d41d3fddf0f6193e7 | |
| 3663 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3664 | Date: Tue May 8 09:21:57 2007 +0200 | |
| 3665 | ||
| 3666 | [Motion-PRO] Enable Flat Device Tree support and modify default environment | |
| 3667 | to allow booting of FDT-expecting kernels. | |
| 3668 | ||
| 3669 | commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db | |
| 3670 | Author: Michal Simek <monstr@monstr.eu> | |
| 3671 | Date: Mon May 7 23:58:31 2007 +0200 | |
| 3672 | ||
| 3673 | new: USE_MSR_INTR support | |
| 3674 | ||
| 3675 | commit 008861a2f3ef2c062744d733787c7e530a1b8761 | |
| 3676 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 3677 | Date: Mon May 7 22:36:15 2007 +0200 | |
| 3678 | ||
| 3679 | [MPC5xxx] There are networking problems on the Motion-PRO board with | |
| 3680 | current PHY initalization code (tftp timeouts all the time). This commit | |
| 3681 | temporarily disables PHY initalization sequence to make the networking | |
| 3682 | operational, until a fix is found. | |
| 3683 | ||
| 3684 | commit abca901869c3760b6c5fecb825db6c1d91a78a93 | |
| 3685 | Author: Wolfgang Denk <wd@denx.de> | |
| 3686 | Date: Mon May 7 22:10:36 2007 +0200 | |
| 3687 | ||
| 3688 | Get rid of duplicated file (see include/configs/sbc8560.h instead) | |
| 3689 | ||
| 3690 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 3691 | ||
| 3692 | commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6 | |
| 3693 | Author: Wolfgang Denk <wd@denx.de> | |
| 3694 | Date: Mon May 7 22:07:08 2007 +0200 | |
| 3695 | ||
| 3696 | Get rid of duplicated file (see doc/README.SBC8560 instead) | |
| 3697 | ||
| 3698 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 3699 | ||
| 3700 | commit a7bac7e9b57ba948051beb19ec5be3a75ce75383 | |
| 3701 | Author: Michal Simek <monstr@monstr.eu> | |
| 3702 | Date: Mon May 7 19:43:10 2007 +0200 | |
| 3703 | ||
| 3704 | fix: read and write MSR - repair number of parameters | |
| 3705 | ||
| 725671cc WD |
3706 | commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee |
| 3707 | Author: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 3708 | Date: Mon May 7 19:42:49 2007 +0200 | |
| 3709 | ||
| 3710 | [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file | |
| 3711 | ||
| 3712 | A '3' got cut off in the formatting of the last patch to automatically | |
| 3713 | change the clock speed of the system clock on sequoia board. | |
| 3714 | ||
| 3715 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 3716 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3717 | ||
| d62f64cc WD |
3718 | commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 |
| 3719 | Author: Michal Simek <monstr@monstr.eu> | |
| 3720 | Date: Mon May 7 19:33:51 2007 +0200 | |
| 3721 | ||
| 3722 | new: fsl interrupt support | |
| 3723 | FSL_Has_data is connected to INTC. | |
| 3724 | ||
| 3725 | commit 792032baa7d625e34c981ab6df521911bd8dc861 | |
| 3726 | Author: Michal Simek <monstr@monstr.eu> | |
| 3727 | Date: Mon May 7 19:30:12 2007 +0200 | |
| 3728 | ||
| 3729 | fix: interrupt handler | |
| 3730 | remove asm code | |
| 3731 | ||
| 3732 | commit f3f001a341ef185d0f13841be5b5dc3395aacc31 | |
| 3733 | Author: Michal Simek <monstr@monstr.eu> | |
| 3734 | Date: Mon May 7 19:25:08 2007 +0200 | |
| 3735 | ||
| 3736 | fix: remove asm code | |
| 3737 | ||
| 3738 | commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01 | |
| 3739 | Author: Michal Simek <monstr@monstr.eu> | |
| 3740 | Date: Mon May 7 19:12:43 2007 +0200 | |
| 3741 | ||
| 3742 | fix: clean interrupt | |
| 3743 | ||
| 3744 | commit 42efed6130c8fcf7da881385b5427065d2801757 | |
| 3745 | Author: Michal Simek <monstr@monstr.eu> | |
| 3746 | Date: Mon May 7 17:22:25 2007 +0200 | |
| 3747 | ||
| 3748 | fix: interrupt handler for multiple sources | |
| 3749 | ||
| 3750 | commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6 | |
| 3751 | Author: Michal Simek <monstr@monstr.eu> | |
| 3752 | Date: Mon May 7 17:11:09 2007 +0200 | |
| 3753 | ||
| 3754 | new: add writing to msr register | |
| 3755 | ||
| 9986bc3e WD |
3756 | commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2 |
| 3757 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 3758 | Date: Mon May 7 16:43:56 2007 +0200 | |
| 3759 | ||
| 3760 | Fix an ancient CHANGELOG conflict | |
| 3761 | ||
| d62f64cc WD |
3762 | commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562 |
| 3763 | Author: Timur Tabi <timur@freescale.com> | |
| 3764 | Date: Sat May 5 08:12:30 2007 +0200 | |
| 3765 | ||
| 3766 | 5xxx: write MAC address to mac-address and local-mac-address | |
| 3767 | ||
| 3768 | Some device trees have a mac-address property, some have local-mac-address, | |
| 3769 | and some have both. To support all of these device trees, ftp_cpu_setup() | |
| 3770 | should write the MAC address to mac-address and local-mac-address, if they | |
| 3771 | exist. | |
| 3772 | ||
| 3773 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 3774 | Acked-by: Grant Likely <grant.likely@secretlab.ca> | |
| 3775 | ||
| 3776 | commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2 | |
| 3777 | Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> | |
| 3778 | Date: Sun Apr 29 14:01:54 2007 +0200 | |
| 3779 | ||
| 3780 | [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message | |
| 3781 | ||
| 3782 | MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up | |
| 3783 | message. Use PVR to distinguish between the two variants, and print proper CPU | |
| 3784 | information. | |
| 3785 | ||
| 3786 | Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> | |
| 3787 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 3788 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 3789 | ||
| 3790 | commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1 | |
| 3791 | Author: Ladislav Michl <ladis@linux-mips.org> | |
| 3792 | Date: Wed Apr 25 16:01:26 2007 +0200 | |
| 3793 | ||
| 3794 | [PATCH] simplify silent console | |
| 3795 | ||
| 3796 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> | |
| 3797 | Acked-by: Stefan Roese <sr@denx.de> | |
| 3798 | ||
| 3799 | commit b7598a43f2b421a713d8135e98a42c37d9eb9df0 | |
| 3800 | Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> | |
| 3801 | Date: Mon Apr 23 15:30:39 2007 +0200 | |
| 3802 | ||
| 3803 | [PATCH] Avoid assigning PCI resources from zero address | |
| 3804 | ||
| 3805 | If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE | |
| 3806 | core complains and IDE drivers fails to work. Also, assigning zero to a BAR | |
| 3807 | was illegal according to PCI 2.1 (the later revisions seem to have excluded the | |
| 3808 | sentence about "0" being considered an invalid address) -- so, use a reasonable | |
| 3809 | starting value of 0x1000 (that's what the most Linux archs are using). | |
| 3810 | ||
| 3811 | Alternatively, one might have fixed the calls to pci_set_region() individually | |
| 3812 | (some code even seems to have taken care of this issue) but that would have | |
| 3813 | been a lot more work. :-) | |
| 3814 | ||
| 3815 | Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> | |
| 3816 | Acked-by: Stefan Roese <sr@denx.de> | |
| 3817 | ||
| 3818 | commit 9ffd451afeb08e5be7ddae680487ec962b2bca25 | |
| 3819 | Author: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 3820 | Date: Mon Apr 23 14:00:11 2007 +0200 | |
| 3821 | ||
| 3822 | [patch] setenv(...) can delete environmentalvariables | |
| 3823 | ||
| 3824 | update setenv() function so that entering a NULL value for the | |
| 3825 | variable's value will delete the environmental variable | |
| 3826 | ||
| 3827 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 3828 | Acked-by: Stefan Roese <sr@denx.de> | |
| 3829 | ||
| 3830 | commit ebd0a0ae05a44769c4e27458ad4e9f3438250443 | |
| 3831 | Author: Mike Frysinger <vapier@gentoo.org> | |
| 3832 | Date: Mon Apr 23 13:54:24 2007 +0200 | |
| 3833 | ||
| 3834 | [patch] use unsigned char in smc91111 driver for mac | |
| 3835 | ||
| 3836 | the v_mac variable in the smc91111 driver is declared as a signed char ... | |
| 3837 | this causes problems when one of the bytes in the MAC is "signed" like 0xE0 | |
| 3838 | because when it gets printed out, you get a display like: | |
| 3839 | 0xFFFFFFE0 and that's no good | |
| 3840 | ||
| 3841 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
| 3842 | ||
| 3843 | commit ffc50f9bb194343c6303517a517708457a5eb6b8 | |
| 3844 | Author: Michal Simek <monstr@monstr.eu> | |
| 3845 | Date: Sat May 5 18:54:42 2007 +0200 | |
| 3846 | ||
| 3847 | new: FSL and MSR support #2 | |
| 3848 | ||
| 3849 | commit f7e2e0eb0668136305f78bb9c21be79b48a34247 | |
| 3850 | Author: Michal Simek <monstr@monstr.eu> | |
| 3851 | Date: Sat May 5 18:27:16 2007 +0200 | |
| 3852 | ||
| 3853 | new: FSL and MSR support | |
| 3854 | ||
| 3855 | commit 2f15278c2eb911c668b4fe562130b78cf554d139 | |
| 3856 | Author: Wolfgang Denk <wd@denx.de> | |
| 3857 | Date: Sat May 5 18:23:11 2007 +0200 | |
| 3858 | ||
| 3859 | Coding stylke cleanup; update CHANGELOG. | |
| 3860 | ||
| 3861 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 3862 | ||
| 2f15278c WD |
3863 | commit 885ec89b648a899a2f32393fd3ffd9f7234c4402 |
| 3864 | Author: Wolfgang Denk <wd@denx.de> | |
| 3865 | Date: Sat May 5 18:05:02 2007 +0200 | |
| 3866 | ||
| 3867 | Add STX GP3 SSA board to MAKEALL script; update CHANGELOG. | |
| 3868 | ||
| 3869 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 3870 | ||
| 885ec89b WD |
3871 | commit 5499645b3fe17a548af9dfc479ca6e2455f179a2 |
| 3872 | Author: Wolfgang Denk <wd@denx.de> | |
| 3873 | Date: Sat May 5 17:15:50 2007 +0200 | |
| 3874 | ||
| 3875 | Make "file" command happy with some config.mk files; update CHANGELOG | |
| 3876 | ||
| 2f15278c WD |
3877 | commit e3b8c78bc2489c27ae020986ef0eaca684866cef |
| 3878 | Author: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 3879 | Date: Sat May 5 08:32:14 2007 +0200 | |
| 3880 | ||
| 3881 | ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz | |
| 3882 | ||
| 3883 | The AMCC Secquoia board has been changed in a new revision from using a | |
| 3884 | 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD | |
| 3885 | indicates the difference. This patch reads that bit and uses the correct | |
| 3886 | clock speed for the board. This code is backward compatable will all | |
| 3887 | prior boards. All prior boards will be read as 33.000. | |
| 3888 | ||
| 3889 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 3890 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3891 | ||
| 3892 | commit f544ff6656fca263ed1ebe39899b6d95da67c8b8 | |
| 3893 | Author: Stefan Roese <sr@denx.de> | |
| 3894 | Date: Sat May 5 08:29:01 2007 +0200 | |
| 3895 | ||
| 3896 | ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting | |
| 3897 | ||
| 3898 | Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big | |
| 3899 | for the 4k NAND boot image so define bus_frequency to 133MHz here | |
| 3900 | which is save for the refresh counter setup. | |
| 3901 | ||
| 3902 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3903 | ||
| 4ef218f6 WD |
3904 | commit 2f550ab976405300f5b07bf2890800840d0aa05f |
| 3905 | Author: Timur Tabi <timur@freescale.com> | |
| 3906 | Date: Sat May 5 08:12:30 2007 +0200 | |
| 3907 | ||
| 3908 | 5xxx: write MAC address to mac-address and local-mac-address | |
| 3909 | ||
| 3910 | Some device trees have a mac-address property, some have local-mac-address, | |
| 3911 | and some have both. To support all of these device trees, ftp_cpu_setup() | |
| 3912 | should write the MAC address to mac-address and local-mac-address, if they | |
| 3913 | exist. | |
| 3914 | ||
| 3915 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 3916 | Acked-by: Grant Likely <grant.likely@secretlab.ca> | |
| 3917 | ||
| 5499645b WD |
3918 | commit a79886590593ba1d667c840caa4940c61639f18f |
| 3919 | Author: Thomas Knobloch <knobloch@siemens.com> | |
| 3920 | Date: Sat May 5 07:04:42 2007 +0200 | |
| 3921 | ||
| 3922 | NAND: Wrong calculation of page number in nand_block_bad() | |
| 3923 | ||
| 3924 | In case that there is no memory based bad block table available the | |
| 3925 | function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call | |
| 3926 | nand_block_bad() directly. When parameter 'getchip' is set to zero, | |
| 3927 | nand_block_bad() will not right shift the offset to calculate the | |
| 3928 | correct page number. | |
| 3929 | ||
| 3930 | Signed-off-by: Thomas Knobloch <knobloch@siemens.com> | |
| 3931 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 3932 | ||
| 3933 | commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6 | |
| 3934 | Author: Wolfgang Denk <wd@denx.de> | |
| 3935 | Date: Fri May 4 10:02:33 2007 +0200 | |
| 3936 | ||
| 3937 | Fix initrd length corruption in bootm command. | |
| 3938 | ||
| 3939 | When using FDT Images, the length of an inital ramdisk was | |
| 3940 | overwritten (bug introduced by commit 87a449c8, 22 Aug 2006). | |
| 3941 | ||
| 3942 | Patches by Timur Tabi & Johns Daniel. | |
| 3943 | ||
| 3944 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 3945 | ||
| a7676ea7 WD |
3946 | commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96 |
| 3947 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 3948 | Date: Thu May 3 19:43:52 2007 -0500 | |
| 3949 | ||
| 3950 | mpc83xx: fix trivial error in MAKEALL | |
| 3951 | ||
| 3952 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 3953 | ||
| 5499645b WD |
3954 | commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a |
| 3955 | Author: Wolfgang Denk <wd@denx.de> | |
| 3956 | Date: Thu May 3 16:34:41 2007 +0200 | |
| 3957 | ||
| 3958 | Update board configuration for STX GP3SSA board: | |
| 3959 | ||
| 3960 | Enable hush shell, environment in flash rather in EEPROM, | |
| 3961 | more user-friendly default environment, etc. | |
| 3962 | The simple EEPROM environment can be selected easily in the board | |
| 3963 | config file. | |
| 3964 | ||
| 3965 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 3966 | ||
| c64a89d6 WD |
3967 | commit 2c6fb199dc5756fc72f49d1f4de105e089049d65 |
| 3968 | Author: Wolfgang Denk <wd@denx.de> | |
| 3969 | Date: Tue Apr 24 14:37:49 2007 +0200 | |
| 3970 | ||
| 3971 | Cleanup STX GP3SSA code; fix build and compile problems. | |
| 3972 | ||
| 3973 | commit 35171dc04e028ecacc23ad916a66295472555dbf | |
| 3974 | Author: Dan Malek <dan@embeddedalley.com> | |
| 3975 | Date: Fri Jan 5 09:15:34 2007 +0100 | |
| 3976 | ||
| 3977 | Add support for STX GP3SSA (stxssa) Board | |
| 3978 | ||
| 3979 | Signed-off-by Dan Malek, <dan@embeddedalley.com> | |
| 3980 | ||
| be5d72d1 WD |
3981 | commit f2134f8e9eb006bdcd729e89f309c07b2fa45180 |
| 3982 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 3983 | Date: Wed May 2 13:31:53 2007 +0200 | |
| 3984 | ||
| 3985 | macb: Don't restart autonegotiation if we already have link | |
| 3986 | ||
| 3987 | Rework macb_phy_init so that it doesn't attempt to re-negotiate if the | |
| 3988 | link is already up. | |
| 3989 | ||
| 3990 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 3991 | ||
| 3992 | commit 04fcb5d38bc90779cd9a710d60702075986f0e29 | |
| 3993 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 3994 | Date: Wed May 2 13:22:38 2007 +0200 | |
| 3995 | ||
| 3996 | macb: Introduce a few barriers when dealing with DMA descriptors | |
| 3997 | ||
| 3998 | There were a few theoretical possibilities that the compiler might | |
| 3999 | optimize away DMA descriptor reads and/or writes and thus cause | |
| 4000 | synchronization problems with the hardware. Insert barriers where | |
| 4001 | we depend on reads/writes actually hitting memory. | |
| 4002 | ||
| 4003 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4004 | ||
| 885ec89b WD |
4005 | commit ffa621a0d12a1ccd81c936c567f8917a213787a8 |
| 4006 | Author: Andy Fleming <afleming@freescale.com> | |
| 4007 | Date: Sat Feb 24 01:08:13 2007 -0600 | |
| 4008 | ||
| 4009 | Cleaned up some 85xx PCI bugs | |
| 4010 | ||
| 4011 | * Cleaned up the CDS PCI Config Tables and added NULL entries to | |
| 4012 | the end | |
| 4013 | * Fixed PCIe LAWBAR assignemt to use the cpu-relative address | |
| 4014 | * Fixed 85xx PCI code to assign powar region sizes based on the | |
| 4015 | config values (rather than hard-coding them) | |
| 4016 | * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address | |
| 4017 | ||
| 4018 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 4019 | ||
| 4020 | commit 6743105988fc44d5b0d30388c790607835aae7a6 | |
| 4021 | Author: Andy Fleming <afleming@freescale.com> | |
| 4022 | Date: Mon Apr 23 02:54:25 2007 -0500 | |
| 4023 | ||
| 4024 | Add support for the 8568 MDS board | |
| 4025 | ||
| 4026 | This included some changes to common files: | |
| 4027 | * Add 8568 processor SVR to various places | |
| 4028 | * Add support for setting the qe bus-frequency value in the dts | |
| 4029 | * Add the 8568MDS target to the Makefile | |
| 4030 | ||
| 4031 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 4032 | ||
| 4033 | commit af1c2b84bf27c8565baddc82d1abb93700d10e2e | |
| 4034 | Author: David Updegraff <dave@cray.com> | |
| 4035 | Date: Fri Apr 20 14:34:48 2007 -0500 | |
| 4036 | ||
| 4037 | Add support for treating unknown PHYs as generic PHYs. | |
| 4038 | ||
| 4039 | When bringing up u-boot on new boards, PHY support sometimes gets | |
| 4040 | neglected. Most PHYs don't really need any special support, | |
| 4041 | though. By adding a generic entry that always matches if nothing | |
| 4042 | else does, we can provide support for "unsupported" PHYs for the | |
| 4043 | tsec. | |
| 4044 | ||
| 4045 | The generic PHY driver supports most PHYs, including gigabit. | |
| 4046 | ||
| 4047 | Signed-off-by: David Updegraff <dave@cray.com> | |
| 4048 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 4049 | ||
| 5499645b WD |
4050 | commit a75af9bfd8fff0499efdbb90601cec5a2afef117 |
| 4051 | Author: James Yang <James.Yang@freescale.com> | |
| 4052 | Date: Wed Feb 7 15:28:04 2007 -0600 | |
| 4053 | ||
| 4054 | Conditionalize 8641 Rev1.0 MCM workarounds | |
| 4055 | ||
| 4056 | Signed-off-by: James Yang <James.Yang@freescale.com> | |
| 4057 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4058 | ||
| a7676ea7 WD |
4059 | commit f64702b7fc8f8df39d31add770df6e372f9e9ce3 |
| 4060 | Author: Timur Tabi <timur@freescale.com> | |
| 4061 | Date: Mon Apr 30 13:59:50 2007 -0500 | |
| 4062 | ||
| 4063 | Fix memory initialization on MPC8349E-mITX | |
| 4064 | ||
| 4065 | Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP. | |
| 4066 | This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary | |
| 4067 | on some ITX boards, notably those with a revision 3.1 CPU. | |
| 4068 | ||
| 4069 | Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into | |
| 4070 | ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined. | |
| 4071 | ||
| 4072 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 4073 | Acked-by: Michael Benedict <MBenedict@twacs.com> | |
| 4074 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 4075 | ||
| 4076 | commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3 | |
| 4077 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 4078 | Date: Mon Apr 30 15:26:21 2007 -0500 | |
| 4079 | ||
| 4080 | mpc83xx: replace elaborate boottime verbosity with 'clocks' command | |
| 4081 | ||
| 4082 | and fix CPU: to align with Board: display text. | |
| 4083 | ||
| 4084 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 4085 | ||
| 5499645b WD |
4086 | commit c1ab82669d9525998c34e802a12cad662723f22a |
| 4087 | Author: James Yang <James.Yang@freescale.com> | |
| 4088 | Date: Fri Mar 16 13:02:53 2007 -0500 | |
| 4089 | ||
| 4090 | Rewrote picos_to_clk() to avoid rounding errors. | |
| 4091 | Clarified that conversion is to DRAM clocks rather than platform clocks. | |
| 4092 | Made function static to spd_sdram.c. | |
| 4093 | ||
| 4094 | Signed-off-by: James Yang <James.Yang@freescale.com> | |
| 4095 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4096 | ||
| 2f15278c WD |
4097 | commit 8b39501d28754e72726ce7fb02310e56dbdf116a |
| 4098 | Author: Stefan Roese <sr@denx.de> | |
| 4099 | Date: Sun Apr 29 14:13:01 2007 +0200 | |
| 4100 | ||
| 4101 | ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver | |
| 4102 | ||
| 4103 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 4104 | ||
| 4ef218f6 WD |
4105 | commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9 |
| 4106 | Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> | |
| 4107 | Date: Sun Apr 29 14:01:54 2007 +0200 | |
| 4108 | ||
| 4109 | [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message | |
| 4110 | ||
| 4111 | MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up | |
| 4112 | message. Use PVR to distinguish between the two variants, and print proper CPU | |
| 4113 | information. | |
| 4114 | ||
| 4115 | Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> | |
| 4116 | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> | |
| 4117 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 4118 | ||
| a7676ea7 WD |
4119 | commit 5c5d3242935cf3543af01142627494434834cf98 |
| 4120 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 4121 | Date: Wed Apr 25 12:34:38 2007 -0500 | |
| 4122 | ||
| 4123 | mpc83xx: minor fixups for 8313rdb introduction | |
| 4124 | ||
| 4ef218f6 WD |
4125 | commit ada4d40091f6ed4a4f0040e08d20db21967e4a67 |
| 4126 | Author: Ladislav Michl <ladis@linux-mips.org> | |
| 4127 | Date: Wed Apr 25 16:01:26 2007 +0200 | |
| 4128 | ||
| 4129 | [PATCH] simplify silent console | |
| 4130 | ||
| 4131 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> | |
| 4132 | Acked-by: Stefan Roese <sr@denx.de> | |
| 4133 | ||
| d62f64cc WD |
4134 | commit 144876a380f5756f57412caf74c1d6dc201dd796 |
| 4135 | Author: Michal Simek <monstr@monstr.eu> | |
| 4136 | Date: Tue Apr 24 23:01:02 2007 +0200 | |
| 4137 | ||
| 4138 | [PATCH] MTD partition support, JFFS2 support | |
| 4139 | ||
| 2f15278c WD |
4140 | commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb |
| 4141 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 4142 | Date: Tue Apr 24 14:03:45 2007 +0200 | |
| 4143 | ||
| 4144 | ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content. | |
| 4145 | ||
| 4146 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 4147 | ||
| 885ec89b WD |
4148 | commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d |
| 4149 | Author: Andy Fleming <afleming@freescale.com> | |
| 4150 | Date: Mon Apr 23 02:37:47 2007 -0500 | |
| 4151 | ||
| 4152 | Reworked 85xx speed detection code | |
| 4153 | ||
| 4154 | Changed the code to read the registers and calculate the clock | |
| 4155 | rates, rather than using a "switch" statement. | |
| 4156 | ||
| 4157 | Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com> | |
| 4158 | ||
| 4159 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 4160 | ||
| 4161 | commit 81f481ca708ed6a56bf9c410e3191dbad581c565 | |
| 4162 | Author: Andy Fleming <afleming@freescale.com> | |
| 4163 | Date: Mon Apr 23 02:24:28 2007 -0500 | |
| 4164 | ||
| 4165 | Enable 8544 support | |
| 4166 | ||
| 4167 | * Add support to the Makefile | |
| 4168 | * Add 8544 configuration support to the tsec driver | |
| 4169 | * Add 8544 SVR numbers to processor.h | |
| 4170 | ||
| 4171 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4172 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4173 | ||
| 4174 | commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe | |
| 4175 | Author: Andy Fleming <afleming@freescale.com> | |
| 4176 | Date: Fri Feb 23 17:12:25 2007 -0600 | |
| 4177 | ||
| 4178 | Support 1G size on 8548 | |
| 4179 | ||
| 4180 | e500v2 and newer cores support 1G page sizes. | |
| 4181 | ||
| 4182 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4183 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 4184 | ||
| 4185 | commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46 | |
| 4186 | Author: Andy Fleming <afleming@freescale.com> | |
| 4187 | Date: Fri Feb 23 17:11:16 2007 -0600 | |
| 4188 | ||
| 4189 | Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG | |
| 4190 | ||
| 4191 | The other pagesz constants use one letter to specify order of | |
| 4192 | magnitude. Also change the one reference to it in mpc8548cds/init.S | |
| 4193 | ||
| 4194 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 4195 | ||
| 4196 | commit 1f9a318cea14272edd10d63739e2d326c90f430e | |
| 4197 | Author: Andy Fleming <afleming@freescale.com> | |
| 4198 | Date: Fri Feb 23 16:28:46 2007 -0600 | |
| 4199 | ||
| 4200 | Only set ddrioovcr for 8548 rev1. | |
| 4201 | ||
| 4202 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4203 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 4204 | ||
| 4205 | commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2 | |
| 4206 | Author: Andy Fleming <afleming@freescale.com> | |
| 4207 | Date: Sat Feb 24 01:16:45 2007 -0600 | |
| 4208 | ||
| 4209 | Tweak DDR ECC error counter | |
| 4210 | ||
| 4211 | Enable single-bit error counter when memory was cleared by ddr controller. | |
| 4212 | ||
| 4213 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4214 | Signed-off-by: Andy Fleming <afleming@freescale.com> | |
| 4215 | ||
| 4216 | commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b | |
| 4217 | Author: Timur Tabi <timur@freescale.com> | |
| 4218 | Date: Mon Feb 12 13:34:55 2007 -0600 | |
| 4219 | ||
| 4220 | 85xx: write MAC address to mac-address and local-mac-address | |
| 4221 | ||
| 4222 | Some device trees have a mac-address property, some have local-mac-address, | |
| 4223 | and some have both. To support all of these device trees, ftp_cpu_setup() | |
| 4224 | should write the MAC address to mac-address and local-mac-address, if they | |
| 4225 | exist. | |
| 4226 | ||
| 4227 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 4228 | ||
| 4229 | commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4 | |
| 4230 | Author: Andy Fleming <afleming@freescale.com> | |
| 4231 | Date: Mon Apr 23 01:44:44 2007 -0500 | |
| 4232 | ||
| 4233 | Some 85xx cpu cleanups | |
| 4234 | ||
| 4235 | * Cleaned up the TSR[WIS] clearing | |
| 4236 | * Cleaned up DMA initialization | |
| 4237 | ||
| 4238 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4239 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4240 | Acked-by: Andy Fleming <afleming@freescale.com> | |
| 4241 | ||
| 4242 | commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb | |
| 4243 | Author: Andy Fleming <afleming@freescale.com> | |
| 4244 | Date: Mon Apr 23 01:32:22 2007 -0500 | |
| 4245 | ||
| 4246 | Add cpu support for the 8544 | |
| 4247 | ||
| 4248 | Recognize new SVR values, and add a few register definitions | |
| 4249 | ||
| 4250 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4251 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4252 | Acked-by: Andy Fleming <afleming@freescale.com> | |
| 4253 | ||
| 4254 | commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae | |
| 4255 | Author: Jon Loeliger <jdl@freescale.com> | |
| 4256 | Date: Wed Apr 11 16:51:02 2007 -0500 | |
| 4257 | ||
| 4258 | Add MPC8544DS basic port board files. | |
| 4259 | ||
| 4260 | Add board port under new board/freescale directory | |
| 4261 | structure and reuse existing PIXIS FPGA support there. | |
| 4262 | ||
| 4263 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4264 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4265 | ||
| 4266 | commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa | |
| 4267 | Author: Jon Loeliger <jdl@freescale.com> | |
| 4268 | Date: Wed Apr 11 16:50:57 2007 -0500 | |
| 4269 | ||
| 4270 | Add MPC8544DS main configuration file. | |
| 4271 | ||
| 4272 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4273 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4274 | ||
| 4275 | commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6 | |
| 4276 | Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> | |
| 4277 | Date: Wed Dec 27 22:07:15 2006 +0300 | |
| 4278 | ||
| 4279 | Fix PCI I/O space mapping on Freescale MPC85x0ADS | |
| 4280 | ||
| 4281 | The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit | |
| 4282 | 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's | |
| 4283 | describing the local address window used for the PCI I/O space accesses -- fix | |
| 4284 | this and carry over the necessary changes into the MPC8560ADS code since the | |
| 4285 | PCI I/O space mapping was also broken for this board (by the earlier commit | |
| 4286 | 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how | |
| 4287 | the PCI I/O space must be mapped to all the MPC85xx board config. headers. | |
| 4288 | ||
| 4289 | Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> | |
| 4290 | ||
| 4291 | board/mpc8540ads/init.S | 4 ++-- | |
| 4292 | board/mpc8560ads/init.S | 4 ++-- | |
| 4293 | include/configs/MPC8540ADS.h | 5 ++--- | |
| 4294 | include/configs/MPC8541CDS.h | 2 +- | |
| 4295 | include/configs/MPC8548CDS.h | 2 +- | |
| 4296 | include/configs/MPC8560ADS.h | 8 ++++---- | |
| 4297 | 6 files changed, 12 insertions(+), 13 deletions(-) | |
| 4298 | ||
| 4299 | commit 96629cbabdb727d4a5e62542deefc01d498db6dc | |
| 4300 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> | |
| 4301 | Date: Tue Dec 5 16:42:30 2006 +0800 | |
| 4302 | ||
| 4303 | u-boot: Fix e500 v2 core reset bug | |
| 4304 | ||
| 4305 | The following patch fixes the e500 v2 core reset bug. | |
| 4306 | For e500 v2 core, a new reset control register is added to reset the | |
| 4307 | processor. | |
| 4308 | ||
| 4309 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 4310 | ||
| 4311 | commit 63247a5acd58032e6cf33f525bc3923b467bac88 | |
| 4312 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> | |
| 4313 | Date: Wed Dec 20 11:01:00 2006 +0800 | |
| 4314 | ||
| 4315 | u-boot: v2: Remove the fixed TLB and LAW entrynubmer | |
| 4316 | ||
| 4317 | Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW | |
| 4318 | entry number to control the loop. This can reduce the potential risk | |
| 4319 | for the 85xx processor increasing its TLB adn LAW entry number. | |
| 4320 | ||
| 4321 | Signed-off-by: Swarthout Edward <swarthout@freescale.com> | |
| 4322 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 4323 | ||
| 4324 | commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf | |
| 4325 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> | |
| 4326 | Date: Mon Dec 18 17:01:04 2006 +0800 | |
| 4327 | ||
| 4328 | u-boot: Fix the 85xxcds tsec bug | |
| 4329 | ||
| 4330 | Fix the 85xxcds tsec bug. | |
| 4331 | When enable PCI, tsec.o should be added to u-boot.lds to make tsec work. | |
| 4332 | ||
| 4333 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 4334 | ||
| 4335 | commit 7337b237ffc4aaf1b9467024fe472a880d852598 | |
| 4336 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> | |
| 4337 | Date: Fri Dec 15 14:43:31 2006 +0800 | |
| 4338 | ||
| 4339 | u-boot: Fix CPU2 errata on MPC8548CDS board | |
| 4340 | ||
| 4341 | This patch apply workaround of CPU2 errata on MPC8548CDS board. | |
| 4342 | ||
| 4343 | Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> | |
| 4344 | ||
| 4345 | commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09 | |
| 4346 | Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com> | |
| 4347 | Date: Mon Dec 18 16:25:15 2006 +0800 | |
| 4348 | ||
| 4349 | u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default | |
| 4350 | ||
| 4351 | This patch disables MPC8548CDS 2T_TIMING for DDR by default. | |
| 4352 | ||
| 4353 | Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com> | |
| 4354 | ||
| 4355 | commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7 | |
| 4356 | Author: Zang Roy-r61911 <tie-fei.zang@freescale.com> | |
| 4357 | Date: Thu Dec 14 14:14:55 2006 +0800 | |
| 4358 | ||
| 4359 | u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board | |
| 4360 | ||
| 4361 | Enable PCI function and add PEX & rapidio memory map on MPC8548CDS | |
| 4362 | board. | |
| 4363 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 4364 | ||
| a7676ea7 WD |
4365 | commit 96b8a05432f346f36493535c85320b70ec9c7c1b |
| 4366 | Author: Scott Wood <scottwood@freescale.com> | |
| 4367 | Date: Mon Apr 16 14:54:15 2007 -0500 | |
| 4368 | ||
| 4369 | mpc83xx: Add MPC8313ERDB support. | |
| 4370 | ||
| 4371 | Signed-off-by: Scott Wood <scottwood@freescale.com> | |
| 4372 | ||
| 4373 | commit 49ea3b6eafe606285ae4d5c378026153dde53200 | |
| 4374 | Author: Scott Wood <scottwood@freescale.com> | |
| 4375 | Date: Mon Apr 16 14:34:21 2007 -0500 | |
| 4376 | ||
| 4377 | mpc83xx: Add generic PCI setup code. | |
| 4378 | ||
| 4379 | Board code can now request the generic setup code rather than having to | |
| 4380 | copy-and-paste it for themselves. Boards should be converted to use this | |
| 4381 | once they're tested with it. | |
| 4382 | ||
| 4383 | Signed-off-by: Scott Wood <scottwood@freescale.com> | |
| 4384 | ||
| 4385 | commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea | |
| 4386 | Author: Scott Wood <scottwood@freescale.com> | |
| 4387 | Date: Mon Apr 16 14:34:19 2007 -0500 | |
| 4388 | ||
| 4389 | mpc83xx: Add 831x support to speed.c. | |
| 4390 | ||
| 4391 | Signed-off-by: Scott Wood <scottwood@freescale.com> | |
| 4392 | ||
| 4393 | commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f | |
| 4394 | Author: Scott Wood <scottwood@freescale.com> | |
| 4395 | Date: Mon Apr 16 14:34:18 2007 -0500 | |
| 4396 | ||
| 4397 | mpc83xx: Add 831x support to global_data.h | |
| 4398 | ||
| 4399 | Signed-off-by: Scott Wood <scottwood@freescale.com> | |
| 4400 | ||
| 4401 | commit 95e7ef897e54591e615fc1b458b74c286fe1fb06 | |
| 4402 | Author: Scott Wood <scottwood@freescale.com> | |
| 4403 | Date: Mon Apr 16 14:34:16 2007 -0500 | |
| 4404 | ||
| 4405 | mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu(). | |
| 4406 | ||
| 4407 | Rather than misleadingly define PVR_83xx as the specific type of 83xx | |
| 4408 | being built for, the PVR of each core revision is defined. checkcpu() now | |
| 4409 | prints the core that it detects, rather than aborting if it doesn't find | |
| 4410 | what it thinks it wants. | |
| 4411 | ||
| 4412 | Signed-off-by: Scott Wood <scottwood@freescale.com> | |
| 4413 | ||
| 4414 | commit a35b0c4950d84cf9e3a9e32b916135956d1ac636 | |
| 4415 | Author: Scott Wood <scottwood@freescale.com> | |
| 4416 | Date: Mon Apr 16 14:34:15 2007 -0500 | |
| 4417 | ||
| 4418 | mpc83xx: Recognize SPR values for MPC8311 and MPC8313. | |
| 4419 | ||
| 4420 | Signed-off-by: Scott Wood <scottwood@freescale.com> | |
| 4421 | ||
| 4422 | commit d87c57b201b4572d16f1b642998faa00c9912b16 | |
| 4423 | Author: Scott Wood <scottwood@freescale.com> | |
| 4424 | Date: Mon Apr 16 14:31:55 2007 -0500 | |
| 4425 | ||
| 4426 | mpc83xx: Add register definitions for MPC831x. | |
| 4427 | ||
| 4428 | Signed-off-by: Scott Wood <scottwood@freescale.com> | |
| 4429 | ||
| 4ef218f6 WD |
4430 | commit 7fc4c71a143be8666d70803fb25ae60379c95622 |
| 4431 | Author: Stefan Roese <sr@denx.de> | |
| 4432 | Date: Mon Apr 23 15:39:59 2007 +0200 | |
| 4433 | ||
| 4434 | Fix file mode | |
| 4435 | ||
| 4436 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 4437 | ||
| 4438 | commit 38257988abfe74d459ca2ad748b109ca04e4efe1 | |
| 4439 | Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> | |
| 4440 | Date: Mon Apr 23 15:30:39 2007 +0200 | |
| 4441 | ||
| 4442 | [PATCH] Avoid assigning PCI resources from zero address | |
| 4443 | ||
| 4444 | If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE | |
| 4445 | core complains and IDE drivers fails to work. Also, assigning zero to a BAR | |
| 4446 | was illegal according to PCI 2.1 (the later revisions seem to have excluded the | |
| 4447 | sentence about "0" being considered an invalid address) -- so, use a reasonable | |
| 4448 | starting value of 0x1000 (that's what the most Linux archs are using). | |
| 4449 | ||
| 4450 | Alternatively, one might have fixed the calls to pci_set_region() individually | |
| 4451 | (some code even seems to have taken care of this issue) but that would have | |
| 4452 | been a lot more work. :-) | |
| 4453 | ||
| 4454 | Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> | |
| 4455 | Acked-by: Stefan Roese <sr@denx.de> | |
| 4456 | ||
| 4457 | commit afb903a2eb9436baa9270ccc0c27082d86497d89 | |
| 4458 | Author: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 4459 | Date: Mon Apr 23 14:00:11 2007 +0200 | |
| 4460 | ||
| 4461 | [patch] setenv(...) can delete environmentalvariables | |
| 4462 | ||
| 4463 | update setenv() function so that entering a NULL value for the | |
| 4464 | variable's value will delete the environmental variable | |
| 4465 | ||
| 4466 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 4467 | Acked-by: Stefan Roese <sr@denx.de> | |
| 4468 | ||
| 4469 | commit 36f104e5caa747d568eff26b369565af57c2ffa6 | |
| 4470 | Author: Mike Frysinger <vapier@gentoo.org> | |
| 4471 | Date: Mon Apr 23 13:54:24 2007 +0200 | |
| 4472 | ||
| 4473 | [patch] use unsigned char in smc91111 driver for mac | |
| 4474 | ||
| 4475 | the v_mac variable in the smc91111 driver is declared as a signed char ... | |
| 4476 | this causes problems when one of the bytes in the MAC is "signed" like 0xE0 | |
| 4477 | because when it gets printed out, you get a display like: | |
| 4478 | 0xFFFFFFE0 and that's no good | |
| 4479 | ||
| 4480 | Signed-off-by: Mike Frysinger <vapier@gentoo.org> | |
| 4481 | ||
| 9986bc3e WD |
4482 | commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459 |
| 4483 | Author: Rodolfo Giometti <giometti@enneenne.com> | |
| 4484 | Date: Mon Apr 23 13:10:52 2007 +0200 | |
| 4485 | ||
| 4486 | USB: (Another) delay for crappy USB keys. | |
| 4487 | ||
| 4488 | Some USB keys are slow in giving back an answer when the Root HUB | |
| 4489 | enables power lines. | |
| 4490 | ||
| 4491 | Signed-off-by: Rodolfo Giometti <giometti@linux.it> | |
| 4492 | ||
| 5499645b WD |
4493 | commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 |
| 4494 | Author: Stefan Roese <sr@denx.de> | |
| 4495 | Date: Mon Apr 23 12:00:22 2007 +0200 | |
| 4496 | ||
| 4497 | Remove BOARDLIBS usage completely | |
| 4498 | ||
| 4499 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 4500 | ||
| d62f64cc WD |
4501 | commit 32556443840f127170e4baa8bdd5b567039f6c36 |
| 4502 | Author: Michal Simek <monstr@monstr.eu> | |
| 4503 | Date: Sat Apr 21 21:07:22 2007 +0200 | |
| 4504 | ||
| 4505 | [PATCH] SystemACE support for Microblaze | |
| 4506 | ||
| 4507 | commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f | |
| 4508 | Author: Michal Simek <monstr@monstr.eu> | |
| 4509 | Date: Sat Apr 21 21:02:40 2007 +0200 | |
| 4510 | ||
| 4511 | 16bit read/write little endian | |
| 4512 | ||
| 4513 | commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4 | |
| 4514 | Author: Michal Simek <monstr@monstr.eu> | |
| 4515 | Date: Sat Apr 21 20:53:31 2007 +0200 | |
| 4516 | ||
| 4517 | Change ML401 parameters - Xilinx BSP | |
| 4518 | ||
| 5499645b WD |
4519 | commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d |
| 4520 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4521 | Date: Wed Feb 28 05:37:29 2007 -0600 | |
| 4522 | ||
| 4523 | mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines. | |
| 4524 | ||
| 4525 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 4526 | ||
| 4527 | commit 79cb47391eebef85acadb3f6961ef6c55cace6ac | |
| 4528 | Author: Zhang Wei <wei.zhang@freescale.com> | |
| 4529 | Date: Fri Jan 19 10:42:37 2007 +0800 | |
| 4530 | ||
| 4531 | Enable LAWs for MPC8641 PCI-Ex2. | |
| 4532 | ||
| 4533 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> | |
| 4534 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4535 | ||
| 4536 | commit bd7851ce1e1f140665b520026abf1042968b1102 | |
| 4537 | Author: Jon Loeliger <jdl@freescale.com> | |
| 4538 | Date: Fri Apr 20 14:12:26 2007 -0500 | |
| 4539 | ||
| 4540 | mpc86xx; Write MAC address to mac-address and local-mac-address | |
| 4541 | ||
| 4542 | Some device trees have a mac-address property, some have local-mac-address, | |
| 4543 | and some have both. To support all of these device trees, ftp_cpu_setup() | |
| 4544 | should write the MAC address to mac-address and local-mac-address, if they | |
| 4545 | exist. | |
| 4546 | ||
| 4547 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 4548 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4549 | ||
| 4550 | commit 7dbdf28b8bd855a8530dc3292e4982575a197060 | |
| 4551 | Author: Jon Loeliger <jdl@freescale.com> | |
| 4552 | Date: Fri Apr 20 14:11:38 2007 -0500 | |
| 4553 | ||
| 4554 | mpc86xx: protect memcpy to bad address if a mac-address is missing from dt | |
| 4555 | ||
| 4556 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 4557 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 4558 | ||
| c64a89d6 WD |
4559 | commit 14da5f7675bbb427c469e3f45006e027b6e21db9 |
| 4560 | Author: Wolfgang Denk <wd@denx.de> | |
| 4561 | Date: Fri Apr 20 17:43:28 2007 +0200 | |
| 4562 | ||
| 4563 | Cleanup compiler warnings, update CHANGELOG | |
| 4564 | ||
| 4565 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 4566 | ||
| 14da5f76 WD |
4567 | commit 6923565db12af34fd5e02d354ee65a8c78ac460f |
| 4568 | Author: Detlev Zundel <dzu@denx.de> | |
| 4569 | Date: Fri Apr 20 12:01:47 2007 +0200 | |
| 4570 | ||
| 4571 | Fix breakage of NC650 board with respect to nand support. | |
| 4572 | ||
| 4573 | Signed-off-by: Detlev Zundel <dzu@denx.de> | |
| 4574 | ||
| 4575 | commit 39f23cd90947639ac278a18ff277ec786b5ac167 | |
| 4576 | Author: Domen Puncer <domen.puncer@telargo.com> | |
| 4577 | Date: Fri Apr 20 11:13:16 2007 +0200 | |
| 4578 | ||
| 4579 | [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation | |
| 4580 | ||
| 4581 | G2 core reference manual says decrementer and time base | |
| 4582 | are decreasing/increasing once every 4 bus clock cycles. | |
| 4583 | Lets fix it, so time in Linux won't run twice as fast | |
| 4584 | ||
| 4585 | Signed-off-by: Domen Puncer <domen.puncer@telargo.com> | |
| 4586 | Acked-by: Grant Likely <grant.likely@secretlab.ca> | |
| 4587 | ||
| 4588 | commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56 | |
| 4589 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 4590 | Date: Thu Apr 19 23:14:39 2007 -0400 | |
| 4591 | ||
| 4592 | Fix serious pointer bug with bootm and reserve map. | |
| 4593 | ||
| 4594 | What was suppose to be a stack variable was declared as a pointer, | |
| 4595 | overwriting random memory. | |
| 4596 | Also moved the libfdt.a requirement into the main Makefile. That is | |
| 4597 | The U-Boot Way. | |
| 4598 | ||
| 2f15278c WD |
4599 | commit d21686263574e95cb3e9e9b0496f968b1b897fdb |
| 4600 | Author: Stefan Roese <sr@denx.de> | |
| 4601 | Date: Thu Apr 19 09:53:52 2007 +0200 | |
| 4602 | ||
| 4603 | ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai | |
| 4604 | ||
| 4605 | Previous versions used full wait states for the chip select #1 which | |
| 4606 | is connected to the Xilinix SystemACE controller on the AMCC Katmai | |
| 4607 | evaluation board. This leads to really slow access and therefore low | |
| 4608 | performance. This patch now sets up the chip select a lot faster | |
| 4609 | resulting in much better read/write performance of the Linux driver. | |
| 4610 | ||
| 4611 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 4612 | ||
| 14da5f76 WD |
4613 | commit 37837828d89084879bee2f2b8c7c68d4695940df |
| 4614 | Author: Wolfgang Denk <wd@denx.de> | |
| 4615 | Date: Wed Apr 18 17:49:29 2007 +0200 | |
| 4616 | ||
| 4617 | Clenaup, update CHANGELOG | |
| 4618 | ||
| 4619 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 4620 | ||
| 37837828 WD |
4621 | commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449 |
| 4622 | Author: Wolfgang Denk <wd@denx.de> | |
| 4623 | Date: Wed Apr 18 17:20:58 2007 +0200 | |
| 4624 | ||
| 4625 | Update CHANGELOG | |
| 4626 | ||
| 4627 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 4628 | ||
| fd094c63 WD |
4629 | commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b |
| 4630 | Author: Wolfgang Denk <wd@denx.de> | |
| 4631 | Date: Wed Apr 18 17:07:26 2007 +0200 | |
| 4632 | ||
| 4633 | Cleanup, update CHANGELOG | |
| 4634 | ||
| 4635 | Sigend-off-by: Wolfgang Denk <wd@denx.de> | |
| 4636 | ||
| b99c1e6d WD |
4637 | commit 5f6c732affea9647762d27a4617a2ae64c52dceb |
| 4638 | Author: Wolfgang Denk <wd@denx.de> | |
| 4639 | Date: Wed Apr 18 16:17:46 2007 +0200 | |
| 4640 | ||
| 4641 | Update CHANGELOG | |
| 4642 | ||
| 5f6c732a WD |
4643 | commit ad4eb555671d97f96dc56eab55103b1f86874b01 |
| 4644 | Author: Wolfgang Denk <wd@denx.de> | |
| 4645 | Date: Wed Apr 18 14:30:39 2007 +0200 | |
| 4646 | ||
| 4647 | MCC200 board: remove warning which is obsolete after PSoC firmware changes | |
| 4648 | ||
| 4649 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 4650 | ||
| 4651 | commit 3747a3f010b2b1442dec3e871c69788b6017aaae | |
| 4652 | Author: Domen Puncer <domen.puncer@telargo.com> | |
| 4653 | Date: Wed Apr 18 12:11:05 2007 +0200 | |
| 4654 | ||
| 4655 | [PATCH] icecube/lite5200b: document wakeup from low-power support | |
| 4656 | ||
| 4657 | Signed-off-by: Domen Puncer <domen.puncer@telargo.com> | |
| 4658 | ||
| 4659 | commit e673226ff9d6aa91b47ceac74b8c13770b06bb37 | |
| 4660 | Author: Stefan Roese <sr@denx.de> | |
| 4661 | Date: Wed Apr 18 12:07:47 2007 +0200 | |
| 4662 | ||
| 4663 | ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM | |
| 4664 | ||
| 4665 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 4666 | ||
| 4667 | commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f | |
| 4668 | Author: Stefan Roese <sr@denx.de> | |
| 4669 | Date: Wed Apr 18 12:05:59 2007 +0200 | |
| 4670 | ||
| 4671 | ppc4xx: Add output for bootrom location to 405EZ ports | |
| 4672 | ||
| 4673 | Now 405EZ ports also show upon bootup from which boot device | |
| 4674 | they are configured to boot: | |
| 4675 | ||
| 4676 | U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05) | |
| 4677 | ||
| 4678 | CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz) | |
| 4679 | Bootstrap Option E - Boot ROM Location EBC (32 bits) | |
| 4680 | 16 kB I-Cache 16 kB D-Cache | |
| 4681 | Board: Acadia - AMCC PPC405EZ Evaluation Board | |
| 4682 | ||
| 4683 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 4684 | ||
| 14da5f76 WD |
4685 | commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85 |
| 4686 | Author: Peter Pearse <peter.pearse@arm.com> | |
| 4687 | Date: Tue Apr 17 13:30:33 2007 +0100 | |
| 4688 | ||
| 4689 | Move ppearse to ARM board list | |
| 4690 | Add Konstantin Kletschke for scb9328. | |
| 4691 | Signed-off-by: Peter Pearse <peter.pearse@arm.com> | |
| 4692 | ||
| 5f6c732a WD |
4693 | commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3 |
| 4694 | Author: Domen Puncer <domen.puncer@telargo.com> | |
| 4695 | Date: Mon Apr 16 14:00:13 2007 +0200 | |
| 4696 | ||
| 4697 | [PATCH] icecube/lite5200b: wakeup from low-power support | |
| 4698 | ||
| 4699 | U-Boot part of Lite5200b low power mode support. | |
| 4700 | Puts SDRAM out of self-refresh and transfers control to | |
| 4701 | address saved at physical 0x0. | |
| 4702 | ||
| 4703 | Signed-off-by: Domen Puncer <domen.puncer@telargo.com> | |
| 4704 | Acked-by: Grant Likely <grant.likely@secretlab.ca> | |
| 4705 | ||
| 37837828 WD |
4706 | commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460 |
| 4707 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 4708 | Date: Sun Apr 15 13:54:26 2007 -0400 | |
| 4709 | ||
| 4710 | Fix the ft_cpu_setup() property settings. | |
| 4711 | ||
| 4712 | Use "setter" functions instead of flags, cleaner and more flexible. | |
| 4713 | It also fixes the problem noted by Timur Tabi that the ethernet MAC | |
| 4714 | addresses were all being set incorrectly to the same MAC address. | |
| 4715 | ||
| 4716 | commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4 | |
| 4717 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 4718 | Date: Sat Apr 14 22:51:24 2007 -0400 | |
| 4719 | ||
| 4720 | Improve the bootm command for CONFIG_OF_LIBFDT | |
| 4721 | ||
| 4722 | In bootm, create the "/chosen" node only if it doesn't already exist | |
| 4723 | (better matches the previous behavior). | |
| 4724 | Update for proper reserved memory map handling for initrd. | |
| 4725 | ||
| 4726 | commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888 | |
| 4727 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 4728 | Date: Sat Apr 14 22:46:41 2007 -0400 | |
| 4729 | ||
| 4730 | Add some utilities to manipulate the reserved memory map. | |
| 4731 | ||
| 5f6c732a WD |
4732 | commit 8048cdd56f04a756eeea4951f402bf5cc33785db |
| 4733 | Author: Wolfgang Denk <wd@denx.de> | |
| 4734 | Date: Sat Apr 14 21:16:54 2007 +0200 | |
| 4735 | ||
| 4736 | Update CHANGELOG | |
| 4737 | ||
| 2a26ec47 WD |
4738 | commit 8e6875183cdca91c134408d119d4abcd48ef6856 |
| 4739 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4740 | Date: Sun Dec 17 18:56:46 2006 +0100 | |
| 4741 | ||
| 4742 | AVR32: Enable MMC support | |
| 4743 | ||
| 4744 | Set up the portmux for the MMC interface and enable the MMC driver | |
| 4745 | along with support for DOS partitions, ext2 and FAT filesystems. | |
| 4746 | ||
| 4747 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4748 | ||
| 4749 | commit fc26c97bb6df41b4a95662c34054fe912387bf38 | |
| 4750 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4751 | Date: Fri Jan 20 10:03:53 2006 +0100 | |
| 4752 | ||
| 4753 | Atmel MCI driver | |
| 4754 | ||
| 4755 | Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs. | |
| 4756 | ||
| 4757 | The AT91 ARM-based CPUs use basically the same hardware, so it should | |
| 4758 | be possible to share this driver, but no effort has been made so far. | |
| 4759 | ||
| 4760 | Hardware documentation can be found in the AT32AP7000 data sheet, | |
| 4761 | which can be downloaded from | |
| 4762 | ||
| 4763 | http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 | |
| 4764 | ||
| 4765 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4766 | ||
| 4767 | commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f | |
| 4768 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4769 | Date: Sun Dec 17 18:55:37 2006 +0100 | |
| 4770 | ||
| 4771 | AVR32: Add clk and gpio infrastructure for mmci | |
| 4772 | ||
| 4773 | Implement functions for configuring the mmci pins, as well as | |
| 4774 | functions for getting the clock rate of the mmci controller. | |
| 4775 | ||
| 4776 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4777 | ||
| 4778 | commit 7fac3f69e9f05c5e5326681976c35d129324c4de | |
| 4779 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4780 | Date: Sun Dec 17 18:53:56 2006 +0100 | |
| 4781 | ||
| 4782 | Enable partition support with MMC | |
| 4783 | ||
| 4784 | Include implementations of init_part() and get_partition_info() when | |
| 4785 | CONFIG_MMC is set. | |
| 4786 | ||
| 4787 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4788 | ||
| 4789 | commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872 | |
| 4790 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4791 | Date: Sun Dec 17 17:14:30 2006 +0100 | |
| 4792 | ||
| 4793 | AVR32: Enable networking | |
| 4794 | ||
| 4795 | Implement MACB initialization for AVR32 and ATSTK1000, and turn | |
| 4796 | everything on, including the MACB driver. | |
| 4797 | ||
| 4798 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4799 | ||
| 4800 | commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009 | |
| 4801 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4802 | Date: Fri Jan 20 10:03:34 2006 +0100 | |
| 4803 | ||
| 4804 | Atmel MACB ethernet driver | |
| 4805 | ||
| 4806 | Driver for the Atmel MACB on-chip ethernet controller. | |
| 4807 | ||
| 4808 | This driver has been tested on the ATSTK1000 board with a AT32AP7000 | |
| 4809 | CPU. It should probably work on AT91SAM926x as well with some minor | |
| 4810 | modifications. | |
| 4811 | ||
| 4812 | Hardware documentation can be found in the AT32AP7000 data sheet, | |
| 4813 | which can be downloaded from | |
| 4814 | ||
| 4815 | http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 | |
| 4816 | ||
| 4817 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4818 | ||
| 4819 | commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556 | |
| 4820 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4821 | Date: Sun Dec 17 16:56:14 2006 +0100 | |
| 4822 | ||
| 4823 | AVR32: Add clk and gpio infrastructure for macb0 and macb1 | |
| 4824 | ||
| 4825 | Implement functions for configuring the macb0 and macb1 pins, as | |
| 4826 | well as functions for getting the clock rate of the various | |
| 4827 | busses the macb ethernet controllers are connected to. | |
| 4828 | ||
| 4829 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4830 | ||
| 4831 | commit d5acb95b16a0a74c643524342c3437e765426d05 | |
| 4832 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4833 | Date: Sun Dec 17 15:39:15 2006 +0100 | |
| 4834 | ||
| 4835 | AVR32: Implement simple DMA memory allocator | |
| 4836 | ||
| 4837 | Implement dma_alloc_coherent() which returns cache-aligned | |
| 4838 | uncacheable memory. | |
| 4839 | ||
| 4840 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4841 | ||
| 4842 | commit 91975b0fea773c9e681fea8cf3349669f27685ee | |
| 4843 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4844 | Date: Sun Dec 17 15:46:02 2006 +0100 | |
| 4845 | ||
| 4846 | Import <linux/mii.h> from the Linux kernel | |
| 4847 | ||
| 4848 | Instead of creating yet another set of MII register definitions | |
| 4849 | in the macb driver, here's a complete set of definitions for everyone | |
| 4850 | to use. | |
| 4851 | ||
| 4852 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4853 | ||
| 4854 | commit 1b804b229556a4d862da93c0ec94e79419364b2c | |
| 4855 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4856 | Date: Wed Mar 21 19:47:36 2007 +0100 | |
| 4857 | ||
| 4858 | AVR32: Include more commands for ATSTK1000 | |
| 4859 | ||
| 4860 | Include the imi, imls and jffs commands sets by default on ATSTK1000. | |
| 4861 | Also define CONFIG_BOOTARGS to something more useful, define | |
| 4862 | CONFIG_BOOTCOMMAND and enable autoboot by default. | |
| 4863 | ||
| 4864 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4865 | ||
| 4866 | commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d | |
| 4867 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4868 | Date: Wed Mar 21 19:44:48 2007 +0100 | |
| 4869 | ||
| 4870 | AVR32: Provide a definition of struct stat | |
| 4871 | ||
| 4872 | Copy the definition of struct stat from the Linux kernel. | |
| 4873 | ||
| 4874 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4875 | ||
| 4876 | commit 12f099c08167a7a51aeee623bc16dafd0841271c | |
| 4877 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4878 | Date: Sun Dec 17 14:46:06 2006 +0100 | |
| 4879 | ||
| 4880 | AVR32: Use initdram() instead of board_init_memories() | |
| 4881 | ||
| 4882 | Conform to the "standard" interface and use initdram() instead of | |
| 4883 | board_init_memories() on AVR32. This enables us to get rid of the | |
| 4884 | sdram_size member of the global_data struct as well. | |
| 4885 | ||
| 4886 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4887 | ||
| 4888 | commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c | |
| 4889 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4890 | Date: Mon Nov 20 15:53:10 2006 +0100 | |
| 4891 | ||
| 4892 | AVR32: Relocate u-boot to SDRAM | |
| 4893 | ||
| 4894 | Relocate the u-boot image into SDRAM like everyone else does. This | |
| 4895 | means that we can handle much larger .data and .bss than we used to. | |
| 4896 | ||
| 4897 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4898 | ||
| 4899 | commit df548d3c3e2bbc40258713167859ffc2ce99a900 | |
| 4900 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4901 | Date: Sun Nov 19 18:06:53 2006 +0100 | |
| 4902 | ||
| 4903 | AVR32: Resource management rewrite | |
| 4904 | ||
| 4905 | Rewrite the resource management code (i.e. I/O memory, clock gating, | |
| 4906 | gpio) so it doesn't depend on any global state. This is necessary | |
| 4907 | because this code is heavily used before relocation to RAM, so we | |
| 4908 | can't write to any global variables. | |
| 4909 | ||
| 4910 | As an added bonus, this makes u-boot's memory footprint a bit smaller, | |
| 4911 | although some functionality has been left out; all clocks are enabled | |
| 4912 | all the time, and there's no checking for gpio line conflicts. | |
| 4913 | ||
| 4914 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4915 | ||
| 4916 | commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9 | |
| 4917 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4918 | Date: Sat Nov 18 18:01:13 2006 +0100 | |
| 4919 | ||
| 4920 | AVR32: Clean up memory-map.h for at32ap7000 | |
| 4921 | ||
| 4922 | Convert spaces to tabs (must have missed this one last time around), | |
| 4923 | sort the entries by address and group them together by bus | |
| 4924 | connectivity. | |
| 4925 | ||
| 4926 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4927 | ||
| 4928 | commit 28c699ef69f4b6cdf252e4747b7b590028a88981 | |
| 4929 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4930 | Date: Sat Nov 18 17:32:31 2006 +0100 | |
| 4931 | ||
| 4932 | AVR32: Build position-independent u-boot | |
| 4933 | ||
| 4934 | Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot | |
| 4935 | position independent. This will make relocation a lot easier. | |
| 4936 | ||
| 4937 | -mno-init-got means that gcc shouldn't emit code to load the GOT | |
| 4938 | address into r6 in every function prologue. We do it once and for | |
| 4939 | all in the early startup assembly code, so enabling this option | |
| 4940 | makes u-boot a bit faster and smaller. | |
| 4941 | ||
| 4942 | The assembly parts have always been position-independent, so no code | |
| 4943 | changes should be necessary. | |
| 4944 | ||
| 4945 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4946 | ||
| 4947 | commit 5374b36de91d006d1df9536259fa9f66b01aa3aa | |
| 4948 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4949 | Date: Sat Nov 18 17:24:31 2006 +0100 | |
| 4950 | ||
| 4951 | AVR32: Use avr32-linux- cross-compilation prefix by default | |
| 4952 | ||
| 4953 | It doesn't really matter which toolchain you use to compile u-boot, | |
| 4954 | but the avr32-linux one is probably what most people have installed. | |
| 4955 | ||
| 4956 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4957 | ||
| 4958 | commit c841beeddebece0039e724fb27f4d1a39ee1c6b6 | |
| 4959 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4960 | Date: Sat Nov 18 17:15:30 2006 +0100 | |
| 4961 | ||
| 4962 | AVR32: Split start_u_boot into board_init_f and board_init_r | |
| 4963 | ||
| 4964 | Split the avr32 initialization code into a function to run before | |
| 4965 | relocation, board_init_f and a function to run after relocation, | |
| 4966 | board_init_r. For now, board_init_f simply calls board_init_r | |
| 4967 | at the end. | |
| 4968 | ||
| 4969 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 4970 | ||
| 8048cdd5 WD |
4971 | commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e |
| 4972 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 4973 | Date: Sat Apr 14 05:26:48 2007 +0200 | |
| 4974 | ||
| 4975 | [Fix] Set the LED status register on the UC101 for the LXT971 PHY. | |
| 4976 | clear the Display after reset. | |
| 4977 | ||
| 4978 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 4979 | ||
| 5f6c732a WD |
4980 | commit 7882751c78b7ecabfd49b0eff8de27661c71f16c |
| 4981 | Author: Denis Peter <d.peter@mpl.ch> | |
| 4982 | Date: Fri Apr 13 09:13:33 2007 +0200 | |
| 4983 | ||
| 4984 | [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c | |
| 4985 | ||
| 4986 | Fix bug introduced by "Fix get_partition_info() parameter error in all | |
| 4987 | other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented | |
| 4988 | to use diskboot or scsiboot form another device than 0. | |
| 4989 | ||
| 4990 | Signed-off-by: Denis Peter <d.peter@mpl.ch> | |
| 4991 | ||
| 4992 | commit 0b94504d22e70f537c17a0d38c87edb6e370977d | |
| 4993 | Author: Greg Lopp <lopp@pobox.com> | |
| 4994 | Date: Fri Apr 13 08:02:24 2007 +0200 | |
| 4995 | ||
| 4996 | [PATCH] Fix use of "void *" for block dev read/write buffer pointers | |
| 4997 | ||
| 4998 | Signed-of-by: Greg Lopp <lopp@pobox.com> | |
| 4999 | Acked-by: Grant Likely <grant.likely@secretlab.ca> | |
| 5000 | ||
| a7676ea7 WD |
5001 | commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9 |
| 5002 | Author: Xie Xiaobo <r63061@freescale.com> | |
| 5003 | Date: Fri Mar 9 19:08:25 2007 +0800 | |
| 5004 | ||
| 5005 | Fix two bugs for MPC83xx DDR2 controller SPD Init | |
| 5006 | ||
| 5007 | There are a few bugs in the cpu/mpc83xx/spd_sdram.c | |
| 5008 | the first bug is that the picos_to_clk routine introduces a huge | |
| 5009 | rounding error in 83xx. | |
| 5010 | the second bug is that the mode register write recovery field is | |
| 5011 | tWR-1, not tWR >> 1. | |
| 5012 | ||
| 5f6c732a WD |
5013 | commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 |
| 5014 | Author: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 5015 | Date: Thu Apr 12 14:15:59 2007 +0200 | |
| 5016 | ||
| 5017 | ppc4xx: Fix i2c divisor calcularion for PPC4xx | |
| 5018 | ||
| 5019 | This patch fixes changes the i2c_init(...) function to use the function | |
| 5020 | get_OPB_freq() rather than calculating the OPB speed by | |
| 5021 | sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is | |
| 5022 | specific per processor. The prior method was not and so was calculating | |
| 5023 | the wrong speed for some PPC4xx processors. | |
| 5024 | ||
| 5025 | Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> | |
| 5026 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5027 | ||
| 8048cdd5 WD |
5028 | commit 6c9ba919375db977aaad9146bf320c7afd07ae7a |
| 5029 | Author: Wolfgang Denk <wd@denx.de> | |
| 5030 | Date: Wed Apr 11 17:25:01 2007 +0200 | |
| 5031 | ||
| 5032 | Update CHANGELOG | |
| 5033 | ||
| 5034 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 5035 | ||
| 6c9ba919 WD |
5036 | commit 51056dd9863e6a1bc363afbbe1775c58cd967418 |
| 5037 | Author: Wolfgang Denk <wd@denx.de> | |
| 5038 | Date: Wed Apr 11 17:22:55 2007 +0200 | |
| 5039 | ||
| 5040 | Update for SC3 board | |
| 5041 | ||
| 5042 | * Make IDE timeout configurable through ide_reset_timeout variable. | |
| 5043 | * Use Newline as "password" string | |
| 5044 | * Use just a single partition in NAND flash | |
| 5045 | ||
| fd094c63 WD |
5046 | commit 3d98b85800c80dc68227c8f10bf5c93456d6d054 |
| 5047 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 5048 | Date: Mon Jan 22 12:37:30 2007 -0600 | |
| 5049 | ||
| 5050 | Add PIXIS FPGA support for MPC8641HPCN board. | |
| 5051 | ||
| 5052 | Move the 8641HPCN's PIXIS code to the new directory | |
| 5053 | board/freescale/common/ as it will be shared by | |
| 5054 | future boards not in the same processor family. | |
| 5055 | ||
| 5056 | Write a "pixis_reset" command that utilizes the FPGA | |
| 5057 | reset sequencer to support alternate soft-reset options | |
| 5058 | such as using the "alternate" flash bank, enabling | |
| 5059 | the watch dog, or choosing different CPU frequencies. | |
| 5060 | ||
| 5061 | Add documentation for the pixis_reset to README.mpc8641hpcn. | |
| 5062 | ||
| 5063 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> | |
| 5064 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 5065 | ||
| 37837828 WD |
5066 | commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642 |
| 5067 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 5068 | Date: Fri Apr 6 14:19:43 2007 -0400 | |
| 5069 | ||
| 5070 | Moved fdt command support code to fdt_support.c | |
| 5071 | ||
| 5072 | ...in preparation for improving the bootm command's handling of fdt blobs. | |
| 5073 | Also cleaned up some coding sloppiness. | |
| 5074 | ||
| 5075 | commit 6679f9299534e488a171a9bb8f9bb891de247aab | |
| 5076 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 5077 | Date: Fri Apr 6 14:17:14 2007 -0400 | |
| 5078 | ||
| 5079 | libfdt: Make fdt_check_header() public | |
| 5080 | ||
| 5081 | Changed _fdt_check_header() to fdt_check_header() and made it part of | |
| 5082 | the interface - it is a useful routine. | |
| 5083 | ||
| 5084 | Also did some asthetics cleanup to the include files (headers). | |
| 5085 | ||
| 5f6c732a WD |
5086 | commit c0707ce65677650b5ceab0500ee50ae5168afef2 |
| 5087 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5088 | Date: Thu Apr 5 18:34:06 2007 +0800 | |
| 5089 | ||
| 5090 | [Blackfin][PATCH] Kill off a bunch of common local prototypes | |
| 5091 | ||
| 5092 | commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d | |
| 5093 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5094 | Date: Thu Apr 5 18:33:04 2007 +0800 | |
| 5095 | ||
| 5096 | [Blackfin][PATCH] Fix dynamic CPLB generation issue | |
| 5097 | ||
| 5098 | commit 0445e3a264251d75b1be45ef713c70726a2952f0 | |
| 5099 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5100 | Date: Thu Apr 5 18:31:47 2007 +0800 | |
| 5101 | ||
| 5102 | [Blackfin][PATCH] minior cleanup | |
| 5103 | ||
| 5104 | commit 155fd766573981090e638b493d5857562151862e | |
| 5105 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5106 | Date: Thu Apr 5 18:31:18 2007 +0800 | |
| 5107 | ||
| 5108 | [Blackfin][PATCH] Fix copyright and update license | |
| 5109 | ||
| 5110 | commit 9fd437bbd75d282f899e1da50be20a2bf38450bc | |
| 5111 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5112 | Date: Thu Apr 5 18:30:25 2007 +0800 | |
| 5113 | ||
| 5114 | [Blackfin][PATCH] Add BF537 EMAC driver initialization | |
| 5115 | ||
| 5116 | commit 889256e8604e0c68db1d866d720894dffede9df6 | |
| 5117 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5118 | Date: Thu Apr 5 18:29:55 2007 +0800 | |
| 5119 | ||
| 5120 | [Blackfin][PATCH] call real the system synchronize instruction | |
| 5121 | ||
| 5122 | commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05 | |
| 5123 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5124 | Date: Thu Apr 5 18:29:17 2007 +0800 | |
| 5125 | ||
| 5126 | [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it | |
| 5127 | ||
| 5128 | commit dfeeab2cd680df047e68e723b246adf6f33bb556 | |
| 5129 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5130 | Date: Thu Apr 5 18:28:34 2007 +0800 | |
| 5131 | ||
| 5132 | [Blackfin][PATCH]: fix flash unaligned copy issue | |
| 5133 | ||
| fd094c63 WD |
5134 | commit 443feb740584e406efa203af909fe2926608e8d5 |
| 5135 | Author: Igor Marnat <marny@rambler.ru> | |
| 5136 | Date: Wed Mar 21 09:55:01 2007 +0300 | |
| 5137 | ||
| 5138 | Update usage of 'nc' in README.NetConsole | |
| 5139 | ||
| 5140 | Added information about usage of NetConsole on systems where the -l and -p | |
| 5141 | switches are mutually exclusive. | |
| 5142 | ||
| 5143 | Signed-off-by: Igor Marnat <marny@rambler.ru> | |
| 5144 | Signed-off-by: Ben Warren <bwarren@qstreams.com> | |
| 5145 | ||
| 6c9ba919 WD |
5146 | commit 31c98a88228021b314c89ebb8104fb6473da4471 |
| 5147 | Author: Wolfgang Denk <wd@denx.de> | |
| 5148 | Date: Wed Apr 4 02:09:30 2007 +0200 | |
| 5149 | ||
| 5150 | Minor coding style cleanup. | |
| 5151 | ||
| 31c98a88 WD |
5152 | commit 94abd7c0583ebe01e799b25f451201deeaab550d |
| 5153 | Author: Wolfgang Denk <wd@denx.de> | |
| 5154 | Date: Wed Apr 4 01:49:15 2007 +0200 | |
| 5155 | ||
| 5156 | Minor cleanup. | |
| 5157 | ||
| 9986bc3e WD |
5158 | commit 822af351ad2babc7d99033361a5fcacd30f6bc78 |
| 5159 | Author: Rodolfo Giometti <giometti@enneenne.com> | |
| 5160 | Date: Tue Apr 3 14:27:18 2007 +0200 | |
| 5161 | ||
| 5162 | Support for the Philips ISP116x HCD (Host Controller Driver) | |
| 5163 | ||
| 5164 | Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> | |
| 5165 | ||
| 5166 | commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8 | |
| 5167 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 5168 | Date: Tue Apr 3 14:27:08 2007 +0200 | |
| 5169 | ||
| 5170 | USB: cleanup monahans usb support. Remove dead code. | |
| 5171 | ||
| 5172 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> | |
| 5173 | ||
| 5f6c732a WD |
5174 | commit a65c5768e5537530bd1780af3d3fddc3113a163c |
| 5175 | Author: Stefan Roese <sr@denx.de> | |
| 5176 | Date: Mon Apr 2 10:09:30 2007 +0200 | |
| 5177 | ||
| 5178 | ppc4xx: Change SysACE address on Katmai | |
| 5179 | ||
| 5180 | With this new base address of the Xilinx SystemACE controller | |
| 5181 | the Linux driver will be easier to adapt, since it can now be | |
| 5182 | mapped via the "normal" ioremap() call. | |
| 5183 | ||
| 5184 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5185 | ||
| 94abd7c0 WD |
5186 | commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73 |
| 5187 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 5188 | Date: Sat Mar 31 14:30:53 2007 -0400 | |
| 5189 | ||
| 5190 | Fix some minor whitespace violations. | |
| 5191 | ||
| 5192 | commit 213bf8c822de8eecaf69860684469cdaba2e9e6a | |
| 5193 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 5194 | Date: Sat Mar 31 12:23:51 2007 -0400 | |
| 5195 | ||
| 5196 | Add a flattened device tree (fdt) command (2 of 2) | |
| 5197 | ||
| 5198 | Modifications to the existing code to support the new fdt command. | |
| 5199 | ||
| 5200 | commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e | |
| 5201 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 5202 | Date: Sat Mar 31 12:22:10 2007 -0400 | |
| 5203 | ||
| 5204 | Add a flattened device tree (fdt) command (1 of 2) | |
| 5205 | ||
| 5206 | The fdt command uses David Gibson's libfdt library to manipulate as well | |
| 5207 | as print the flattened device tree. This patch is the new command, | |
| 5208 | the second part is the modifications to the existing code. | |
| 5209 | ||
| 5210 | commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e | |
| 5211 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 5212 | Date: Sat Mar 31 12:13:43 2007 -0400 | |
| 5213 | ||
| 5214 | libfdt: Enhanced and published fdt_next_tag() | |
| 5215 | ||
| 5216 | Enhanced the formerly private function _fdt_next_tag() to allow stepping | |
| 5217 | through the tree, used to produce a human-readable dump, and made | |
| 5218 | it part of the published interface. | |
| 5219 | Also added some comments. | |
| 5220 | ||
| 5221 | commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71 | |
| 5222 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 5223 | Date: Sat Mar 31 12:05:39 2007 -0400 | |
| 5224 | ||
| 5225 | libfdt: Customizations for use by u-boot. | |
| 5226 | ||
| 5227 | Changes to David Gibson's original source to fit into u-boot's | |
| 5228 | environment. No functionality changes. | |
| 5229 | ||
| 5230 | commit 35748177c64a4a83a00057e93bb33e40278a2a96 | |
| 5231 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 5232 | Date: Sat Mar 31 12:00:56 2007 -0400 | |
| 5233 | ||
| 5234 | libfdt: Import libfdt source (2 of 2) | |
| 5235 | ||
| 5236 | This adds the applicable libfdt source files (unmodified) and a README | |
| 5237 | to explain where the source came from. | |
| 5238 | ||
| 5239 | commit 7cd5da0fe877e7171a4cdd44880bce783132871a | |
| 5240 | Author: Gerald Van Baren <vanbaren@cideas.com> | |
| 5241 | Date: Sat Mar 31 11:59:59 2007 -0400 | |
| 5242 | ||
| 5243 | libfdt: Import libfdt source (1 of 2) | |
| 5244 | ||
| 5245 | This adds the applicable libfdt source files (unmodified) and a README | |
| 5246 | to explain where the source came from. | |
| 5247 | ||
| 6c9ba919 WD |
5248 | commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b |
| 5249 | Author: Stefan Roese <sr@denx.de> | |
| 5250 | Date: Sat Mar 31 13:16:23 2007 +0200 | |
| 5251 | ||
| 5252 | ppc4xx: Update Katmai bootstrap command | |
| 5253 | ||
| 5254 | Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB | |
| 5255 | is selected. | |
| 5256 | ||
| 5257 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5258 | ||
| 5259 | commit cabee756a6532986729477c3cc1ea16ef8517ad2 | |
| 5260 | Author: Stefan Roese <sr@denx.de> | |
| 5261 | Date: Sat Mar 31 13:15:06 2007 +0200 | |
| 5262 | ||
| 5263 | ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) | |
| 5264 | ||
| 5265 | Additional RAM information is now printed upon powerup, like | |
| 5266 | DDR2 frequency and CAS latency. | |
| 5267 | ||
| 5268 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5269 | ||
| 5270 | commit 60723803431ac75cad085690789e433d5ab9174e | |
| 5271 | Author: Stefan Roese <sr@denx.de> | |
| 5272 | Date: Sat Mar 31 08:48:36 2007 +0200 | |
| 5273 | ||
| 5274 | ppc4xx: Change Yucca config file to support ECC | |
| 5275 | ||
| 5276 | With the updated 44x DDR2 driver the Yucca board now supports | |
| 5277 | ECC generation and checking. | |
| 5278 | ||
| 5279 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5280 | ||
| 5281 | commit 490e5730c674b20d708b783a2c5ffd7208f83873 | |
| 5282 | Author: Stefan Roese <sr@denx.de> | |
| 5283 | Date: Sat Mar 31 08:47:34 2007 +0200 | |
| 5284 | ||
| 5285 | ppc4xx: Fix "bootstrap" command for Katmai board | |
| 5286 | ||
| 5287 | The board specific "bootstrap" command is now fixed and can | |
| 5288 | be used for the AMCC Katmai board to configure different | |
| 5289 | CPU/PLB/OPB frequencies. | |
| 5290 | ||
| 5291 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5292 | ||
| 5293 | commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1 | |
| 5294 | Author: Stefan Roese <sr@denx.de> | |
| 5295 | Date: Sat Mar 31 08:46:08 2007 +0200 | |
| 5296 | ||
| 5297 | ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) | |
| 5298 | ||
| 5299 | Fix a bug in the auto calibration routine. This driver now runs | |
| 5300 | more reliable with the tested modules. It's also tested with | |
| 5301 | 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai. | |
| 5302 | ||
| 5303 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5304 | ||
| 31c98a88 WD |
5305 | commit 342cd097be1e7affe82f42ab3da220959a699e64 |
| 5306 | Author: Michal Simek <monstr@monstr.eu> | |
| 5307 | Date: Fri Mar 30 22:52:09 2007 +0200 | |
| 5308 | ||
| 5309 | [PATCH] Clean include dependence | |
| 5310 | ||
| 5311 | commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906 | |
| 5312 | Author: Michal Simek <monstr@monstr.eu> | |
| 5313 | Date: Fri Mar 30 22:42:45 2007 +0200 | |
| 5314 | ||
| 5315 | [CLEAN] Remove inefficient Suzaku code | |
| 5316 | ||
| 6c9ba919 WD |
5317 | commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d |
| 5318 | Author: Stefan Roese <sr@denx.de> | |
| 5319 | Date: Wed Mar 28 15:03:16 2007 +0200 | |
| 5320 | ||
| 5321 | Merge some AMCC make targets to keep the top-level Makefile smaller | |
| 5322 | ||
| 5323 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5324 | ||
| 5325 | commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e | |
| 5326 | Author: Stefan Roese <sr@denx.de> | |
| 5327 | Date: Wed Mar 28 14:52:12 2007 +0200 | |
| 5328 | ||
| 5329 | i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined | |
| 5330 | ||
| 5331 | The "old" i2c commands (iprobe, imd...) are now compiled in again, | |
| 5332 | even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE | |
| 5333 | config option. | |
| 5334 | ||
| 5335 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5336 | ||
| 31c98a88 WD |
5337 | commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a |
| 5338 | Author: Michal Simek <monstr@monstr.eu> | |
| 5339 | Date: Tue Mar 27 00:32:16 2007 +0200 | |
| 5340 | ||
| 5341 | PATCH: Resolve GPL license problem | |
| 5342 | ||
| 9986bc3e WD |
5343 | commit ae00bb4b2944dc64a485ed72a19754b11af7c223 |
| 5344 | Author: Rodolfo Giometti <giometti@enneenne.com> | |
| 5345 | Date: Mon Mar 26 12:03:36 2007 +0200 | |
| 5346 | ||
| 5347 | PXA: pxa27x USB OHCI support | |
| 5348 | ||
| 5349 | Signed-off-by: Rodolfo Giometti <giometti@linux.it> | |
| 5350 | ||
| 5351 | commit ae79f60677c208326535647dcbd5c3ec40dbcb0b | |
| 5352 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 5353 | Date: Mon Mar 26 11:21:05 2007 +0200 | |
| 5354 | ||
| 5355 | USB: remove the S3C24X0_merge #define, which was introduced while | |
| 5356 | merging OHCI drivers. | |
| 5357 | ||
| 5358 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> | |
| 5359 | ||
| 31c98a88 WD |
5360 | commit 1798049522f594013aea29457d46794298c6ae15 |
| 5361 | Author: Michal Simek <root@monstr.eu> | |
| 5362 | Date: Mon Mar 26 01:39:07 2007 +0200 | |
| 5363 | ||
| 5364 | Support for XUPV2P board | |
| 5365 | Reset support | |
| 5366 | BSP autoconfig support | |
| 5367 | ||
| 6c9ba919 WD |
5368 | commit 0d974d5297349504a2ddfa09314be573b5df320a |
| 5369 | Author: Stefan Roese <sr@denx.de> | |
| 5370 | Date: Sat Mar 24 15:57:09 2007 +0100 | |
| 5371 | ||
| 5372 | [PATCH] Add 4xx GPIO functions | |
| 5373 | ||
| 5374 | This patch adds some 4xx GPIO functions. It also moves some of the | |
| 5375 | common code and defines into a common 4xx GPIO header file. | |
| 5376 | ||
| 5377 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5378 | ||
| 5379 | commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11 | |
| 5380 | Author: Stefan Roese <sr@denx.de> | |
| 5381 | Date: Sat Mar 24 15:55:58 2007 +0100 | |
| 5382 | ||
| 5383 | [PATCH] Small Sequoia cleanup | |
| 5384 | ||
| 5385 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5386 | ||
| 5387 | commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf | |
| 5388 | Author: Stefan Roese <sr@denx.de> | |
| 5389 | Date: Sat Mar 24 15:45:34 2007 +0100 | |
| 5390 | ||
| 5391 | [PATCH] Clean up 40EZ/Acadia support | |
| 5392 | ||
| 5393 | This patch cleans up all the open issue of the preliminary | |
| 5394 | Acadia support. | |
| 5395 | ||
| 5396 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5397 | ||
| 94abd7c0 WD |
5398 | commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997 |
| 5399 | Author: Jon Loeliger <jdl@freescale.com> | |
| 5400 | Date: Tue Dec 12 11:02:20 2006 -0600 | |
| 5401 | ||
| 5402 | Fix 8641HPCN problem with ld version 2.16 | |
| 5403 | ||
| 5404 | (Dot outside sections problem). | |
| 5405 | ||
| 5406 | This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540. | |
| 5407 | ||
| 5408 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 5409 | ||
| 5410 | commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c | |
| 5411 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 5412 | Date: Thu Dec 7 10:35:55 2006 -0600 | |
| 5413 | ||
| 5414 | Set Rev 2.x 86xx PIC in mixed mode. | |
| 5415 | ||
| 5416 | Prevent false interrupt from hanging Linux as MSR[EE] is set | |
| 5417 | to enable interrupts by changing the PIC out of the default | |
| 5418 | pass through mode into mixed mode. | |
| 5419 | ||
| 5420 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> | |
| 5421 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 5422 | ||
| 5423 | commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e | |
| 5424 | Author: Jason Jin <jason.jin@freescale.com> | |
| 5425 | Date: Thu Dec 7 10:32:35 2006 -0600 | |
| 5426 | ||
| 5427 | Add flash cmd function to 8641HPCN ramboot | |
| 5428 | ||
| 5429 | Also fixes some commmand for 8641 HPCN ramboot case. | |
| 5430 | ||
| 5431 | Signed-off-by: Jason Jin <jason.jin@freescale.com> | |
| 5432 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 5433 | ||
| 5434 | commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46 | |
| 5435 | Author: Ed Swarthout <ed.swarthout@freescale.com> | |
| 5436 | Date: Thu Dec 7 10:34:14 2006 -0600 | |
| 5437 | ||
| 5438 | Add support for 8641 Rev 2 silicon. | |
| 5439 | ||
| 5440 | Without this patch, I am unable to get to the prompt on rev 2 silicon. | |
| 5441 | Only set ddrioovcr for rev1. | |
| 5442 | ||
| 5443 | Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com> | |
| 5444 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 5445 | ||
| 5446 | commit 44ba464b99001f8bd1c456a1e9d59726252f707a | |
| 5447 | Author: Wolfgang Denk <wd@denx.de> | |
| 5448 | Date: Thu Mar 22 00:13:12 2007 +0100 | |
| 5449 | ||
| 5450 | Code cleanup / re-insert previous Copyright entries. | |
| 5451 | ||
| 5452 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 5453 | ||
| 44ba464b WD |
5454 | commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302 |
| 5455 | Author: Wolfgang Denk <wd@denx.de> | |
| 5456 | Date: Wed Mar 21 23:26:15 2007 +0100 | |
| 5457 | ||
| 5458 | Code cleanup. Update CHANGELOG | |
| 5459 | ||
| 2a8dfe08 WD |
5460 | commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286 |
| 5461 | Author: Stefan Roese <sr@denx.de> | |
| 5462 | Date: Wed Mar 21 14:54:29 2007 +0100 | |
| 5463 | ||
| 5464 | ppc4xx: Fix file mode of include/configs/acadia.h | |
| 5465 | ||
| 5466 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5467 | ||
| 5468 | commit d5f4614c9350d9333e575100fb250aab774d0258 | |
| 5469 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 5470 | Date: Wed Mar 21 14:41:46 2007 +0100 | |
| 5471 | ||
| 5472 | SPC1920: fix small clock routing bug | |
| 5473 | ||
| 5474 | Signed-off-by: Markus Klotzbuecher <mk@denx.de> | |
| 5475 | ||
| 5476 | commit 16c0cc1c82081a493ab87c51980b28336ce1bce8 | |
| 5477 | Author: Stefan Roese <sr@denx.de> | |
| 5478 | Date: Wed Mar 21 13:39:57 2007 +0100 | |
| 5479 | ||
| 5480 | [PATCH] Add AMCC Acadia (405EZ) eval board support | |
| 5481 | ||
| 5482 | This patch adds support for the new AMCC Acadia eval board. | |
| 5483 | ||
| 5484 | Please note that this Acadia/405EZ support is still in a beta stage. | |
| 5485 | Still lot's of cleanup needed but we need a preliminary release now. | |
| 5486 | ||
| 5487 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5488 | ||
| 5489 | commit e01bd218b00af73499331a1a701625a852cd286f | |
| 5490 | Author: Stefan Roese <sr@denx.de> | |
| 5491 | Date: Wed Mar 21 13:38:59 2007 +0100 | |
| 5492 | ||
| 5493 | [PATCH] Add AMCC PPC405EZ support | |
| 5494 | ||
| 5495 | This patch adds support for the new AMCC 405EZ PPC. It is in | |
| 5496 | preparation for the AMCC Acadia board support. | |
| 5497 | ||
| 5498 | Please note that this Acadia/405EZ support is still in a beta stage. | |
| 5499 | Still lot's of cleanup needed but we need a preliminary release now. | |
| 5500 | ||
| 5501 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5502 | ||
| 5503 | commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1 | |
| 5504 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 5505 | Date: Wed Mar 21 08:45:17 2007 +0100 | |
| 5506 | ||
| 5507 | [PATCH] TQM8272: dont change the bits given from the HRCW | |
| 5508 | for the SIUMCR and BCR Register. | |
| 5509 | Fix the calculation for the EEprom Size | |
| 5510 | ||
| 5511 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 5512 | ||
| 44ba464b WD |
5513 | commit 654589873dbafcf104dff133ce0d03a4506e9cc3 |
| 5514 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5515 | Date: Tue Mar 20 18:16:24 2007 +0800 | |
| 5516 | ||
| 5517 | [Blackfin][PATCH] Add BF561 EZKIT board support | |
| 5518 | ||
| 5519 | commit a6154fd1cfd020f6da8527e0365b1020a11a71d0 | |
| 5520 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5521 | Date: Mon Mar 19 22:55:58 2007 +0800 | |
| 5522 | ||
| 5523 | [Blackfin][PATCH] minor cleanup | |
| 5524 | ||
| 2a8dfe08 WD |
5525 | commit 389b6bb50f745bf5038ce030300d8a8512e96f79 |
| 5526 | Author: Wolfgang Denk <wd@denx.de> | |
| 5527 | Date: Mon Mar 19 13:10:08 2007 +0100 | |
| 5528 | ||
| 5529 | Remove obsoleted POST files. | |
| 5530 | ||
| 5531 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 5532 | ||
| 44ba464b WD |
5533 | commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6 |
| 5534 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5535 | Date: Mon Mar 19 01:26:11 2007 +0800 | |
| 5536 | ||
| 5537 | [PATCH] Add flash chip M29W320ET/B support | |
| 5538 | ||
| 5539 | commit 26bf7deca364a5b33f39e8f14ddd3f4081345015 | |
| 5540 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5541 | Date: Mon Mar 19 01:24:52 2007 +0800 | |
| 5542 | ||
| 5543 | [Blackfin][PATCH] Add BF537 stamp board support | |
| 5544 | ||
| 2a8dfe08 WD |
5545 | commit 8423e5e31a7235d05a482627315fb11d49c17bd7 |
| 5546 | Author: Stefan Roese <sr@denx.de> | |
| 5547 | Date: Fri Mar 16 21:11:42 2007 +0100 | |
| 5548 | ||
| 5549 | [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board | |
| 5550 | ||
| 5551 | Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the | |
| 5552 | DDR memory are dynamically programmed matching the total size | |
| 5553 | of the equipped memory (DIMM modules). | |
| 5554 | ||
| 5555 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5556 | ||
| 5557 | commit 76d1466f918b881cda2d259254761e73885093c2 | |
| 5558 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5559 | Date: Tue Mar 13 13:38:05 2007 +0100 | |
| 5560 | ||
| 5561 | [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405 | |
| 5562 | boards in terms of unification. | |
| 5563 | ||
| 5564 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5565 | ||
| 5566 | commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0 | |
| 5567 | Author: Wolfgang Denk <wd@denx.de> | |
| 5568 | Date: Tue Mar 13 16:05:55 2007 +0100 | |
| 5569 | ||
| 5570 | Make SC3 board build with 'make O='; use 'addcons' consistently | |
| 5571 | (SC3 and Jupiter used to use 'addcon' instead). | |
| 5572 | ||
| 5573 | Signed-off-by: Wolfgang Denk wd@denx.de | |
| 5574 | ||
| 5575 | commit 8502e30a28e492c756ea2d7df0ace026388fce4b | |
| 5576 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 5577 | Date: Tue Mar 13 09:40:59 2007 +0100 | |
| 5578 | ||
| 5579 | [PATCH] update board config for jupiter Board: | |
| 5580 | added Hush Shell, | |
| 5581 | CONFIG_CMDLINE_EDITING, | |
| 5582 | CFG_ENV_ADDR_REDUND activated | |
| 5583 | ||
| 5584 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 5585 | ||
| 44ba464b WD |
5586 | commit 0d93de11449390a5984b0236c3612e50f6dbb7e8 |
| 5587 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5588 | Date: Mon Mar 12 12:11:55 2007 +0800 | |
| 5589 | ||
| 5590 | [Blackfin][PATCH] minor cleanup | |
| 5591 | ||
| 5592 | commit bfa5754a58477ac917d21527cd0f079d87cf188e | |
| 5593 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5594 | Date: Mon Mar 12 01:42:06 2007 +0800 | |
| 5595 | ||
| 5596 | [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue | |
| 5597 | ||
| 5598 | commit 8440bb14581a294375c34b91b42512f9753d1130 | |
| 5599 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5600 | Date: Mon Mar 12 00:25:14 2007 +0800 | |
| 5601 | ||
| 5602 | [Blackfin][PATCH] code cleanup | |
| 5603 | ||
| 31c98a88 WD |
5604 | commit cfc67116a706fd18b8f6a9c11a16753c5626d689 |
| 5605 | Author: Michal Simek <monstr@monstr.eu> | |
| 5606 | Date: Sun Mar 11 13:48:24 2007 +0100 | |
| 5607 | ||
| 5608 | [Microblaze][PATCH] part 2 | |
| 5609 | timer support | |
| 5610 | interrupt controller support | |
| 5611 | flash support | |
| 5612 | ethernet support | |
| 5613 | cache support | |
| 5614 | board information support | |
| 5615 | env support | |
| 5616 | booting image support | |
| 5617 | ||
| 5618 | adding support for Xilinx ML401 | |
| 5619 | ||
| 5620 | commit 76316a318de91f6184e7c22a10e02d275ade2441 | |
| 5621 | Author: Michal Simek <monstr@monstr.eu> | |
| 5622 | Date: Sun Mar 11 13:42:58 2007 +0100 | |
| 5623 | ||
| 5624 | [Microblaze][PATCH] | |
| 5625 | timer support | |
| 5626 | interrupt controller support | |
| 5627 | flash support | |
| 5628 | ethernet support | |
| 5629 | cache support | |
| 5630 | board information support | |
| 5631 | env support | |
| 5632 | booting image support | |
| 5633 | ||
| 5634 | adding support for Xilinx ML401 | |
| 5635 | ||
| 44ba464b WD |
5636 | commit 8db13d63157811c839d15a313d9f2d2f5fd10af3 |
| 5637 | Author: Aubrey Li <aubrey.adi@gmail.com> | |
| 5638 | Date: Sat Mar 10 23:49:29 2007 +0800 | |
| 5639 | ||
| 5640 | [Blackfin][PATCH] code cleanup | |
| 5641 | ||
| 5642 | commit ef26a08fef928b7bc11ae2c109e638dc3a016d91 | |
| 5643 | Author: Aubrey.Li <aubrey.adi@gmail.com> | |
| 5644 | Date: Fri Mar 9 13:40:56 2007 +0800 | |
| 5645 | ||
| 5646 | [Blackfin][PATCH-2/2] Common files changed to support bf533 platform | |
| 5647 | ||
| 5648 | commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f | |
| 5649 | Author: Aubrey.Li <aubrey.adi@gmail.com> | |
| 5650 | Date: Fri Mar 9 13:38:44 2007 +0800 | |
| 5651 | ||
| 5652 | [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support | |
| 5653 | ||
| 2a8dfe08 WD |
5654 | commit 992423ab43c2bcf6b704853bd00af77450915e20 |
| 5655 | Author: Stefan Roese <sr@denx.de> | |
| 5656 | Date: Thu Mar 8 23:00:08 2007 +0100 | |
| 5657 | ||
| 5658 | ppc4xx: Fix file mode of sequoia.c | |
| 5659 | ||
| 5660 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5661 | ||
| 5662 | commit eb92f613556800f7483666db09d9a237ad911d4a | |
| 5663 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 5664 | Date: Thu Mar 8 22:52:51 2007 +0100 | |
| 5665 | ||
| 5666 | Minor cleanup. | |
| 5667 | ||
| 5668 | commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1 | |
| 5669 | Author: John Otken john@softadvances.com <john@softadvances.com> | |
| 5670 | Date: Thu Mar 8 09:39:48 2007 -0600 | |
| 5671 | ||
| 5672 | ppc4xx: Clear Sequoia/Rainier security engine reset bits | |
| 5673 | ||
| 5674 | Signed-off-by: John Otken john@softadvances.com <john@softadvances.com> | |
| 5675 | ||
| 5676 | commit 650a330dd2539130c8c324791e2f9f75aed79d4e | |
| 5677 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5678 | Date: Thu Mar 8 16:26:52 2007 +0100 | |
| 5679 | ||
| 5680 | [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules | |
| 5681 | ||
| 5682 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5683 | ||
| 5684 | commit d9fc703246840c4b268debf48c334ba55c597dc0 | |
| 5685 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5686 | Date: Thu Mar 8 16:25:47 2007 +0100 | |
| 5687 | ||
| 5688 | [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined | |
| 5689 | ||
| 5690 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5691 | ||
| 5692 | commit ced5b9029043397348cdc88e0cfcd6b1f629250b | |
| 5693 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5694 | Date: Thu Mar 8 16:23:11 2007 +0100 | |
| 5695 | ||
| 5696 | [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS | |
| 5697 | ||
| 5698 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5699 | ||
| 5700 | commit d8a8ea5c476d37006fc7f85b7f903142795c8b14 | |
| 5701 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5702 | Date: Thu Mar 8 16:20:32 2007 +0100 | |
| 5703 | ||
| 5704 | [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM | |
| 5705 | ||
| 5706 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5707 | ||
| 5708 | commit f9fc6a5852a6335840882fa2111925010eea1abe | |
| 5709 | Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5710 | Date: Wed Mar 7 15:32:01 2007 +0100 | |
| 5711 | ||
| 5712 | fixed ethernet phy configuration for plu405 board | |
| 5713 | ||
| 5714 | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> | |
| 5715 | ||
| 5716 | commit 769104c9356594deb2092e204a39c05b33202d6c | |
| 5717 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 5718 | Date: Thu Mar 8 21:49:27 2007 +0100 | |
| 5719 | ||
| 5720 | Minor cleanup | |
| 5721 | ||
| 769104c9 WD |
5722 | commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa |
| 5723 | Author: Stefan Roese <sr@denx.de> | |
| 5724 | Date: Thu Mar 8 10:13:16 2007 +0100 | |
| 5725 | ||
| 5726 | [PATCH] Update AMCC Luan 440SP eval board support | |
| 5727 | ||
| 5728 | The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR | |
| 5729 | inititializition. This includes DDR auto calibration and support | |
| 5730 | for different DIMM modules, instead of the fixed setup used in | |
| 5731 | the earlier version. | |
| 5732 | ||
| 5733 | This patch also enables the cache in FLASH for the startup | |
| 5734 | phase of U-Boot (while running from FLASH). After relocating to | |
| 5735 | SDRAM the cache is disabled again. This will speed up the boot | |
| 5736 | process, especially the SDRAM setup, since there are some loops | |
| 5737 | for memory testing (auto calibration). | |
| 5738 | ||
| 5739 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5740 | ||
| 5741 | commit 2f5df47351910a2936c7741cf111855829200943 | |
| 5742 | Author: Stefan Roese <sr@denx.de> | |
| 5743 | Date: Thu Mar 8 10:10:18 2007 +0100 | |
| 5744 | ||
| 5745 | [PATCH] Update AMCC Yucca 440SPe eval board support | |
| 5746 | ||
| 5747 | The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR | |
| 5748 | inititializition. This includes DDR auto calibration and support | |
| 5749 | for different DIMM modules, instead of the fixed setup used in | |
| 5750 | the earlier version. | |
| 5751 | ||
| 5752 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5753 | ||
| 5754 | commit 2721a68a9ea91f1e494649ce68b2577261f578e2 | |
| 5755 | Author: Stefan Roese <sr@denx.de> | |
| 5756 | Date: Thu Mar 8 10:07:18 2007 +0100 | |
| 5757 | ||
| 5758 | ppc4xx: Small AMCC Katmai 440SPe update | |
| 5759 | ||
| 5760 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5761 | ||
| 5762 | commit df294497479b1dca6dd86318b2a912f72fede0df | |
| 5763 | Author: Stefan Roese <sr@denx.de> | |
| 5764 | Date: Thu Mar 8 10:06:09 2007 +0100 | |
| 5765 | ||
| 5766 | ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP | |
| 5767 | ||
| 5768 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5769 | ||
| fd094c63 WD |
5770 | commit 83853178bd36bca6f0f8f1331476620c84a587fc |
| 5771 | Author: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 5772 | Date: Wed Mar 7 12:14:50 2007 -0600 | |
| 5773 | ||
| 5774 | net - Support ping reply when processing net-loop | |
| 5775 | ||
| 5776 | Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY. | |
| 5777 | ||
| 5778 | This permits the ping command to test the phy interface when the phy | |
| 5779 | is put in loopback mode (typically by setting register 0 bit 14). | |
| 5780 | ||
| 5781 | It also allows the port to respond to an external ping when u-boot is | |
| 5782 | processing some other net command (such as tftp). This is useful when | |
| 5783 | tftp appears to hang. | |
| 5784 | ||
| 5785 | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> | |
| 5786 | Signed-off-by: Ben Warren <bwarren@qstreams.com> | |
| 5787 | ||
| 769104c9 WD |
5788 | commit fa1aef15bcd47736687be1af544506e90fba545d |
| 5789 | Author: Stefan Roese <sr@denx.de> | |
| 5790 | Date: Wed Mar 7 16:43:00 2007 +0100 | |
| 5791 | ||
| 5792 | [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board | |
| 5793 | ||
| 5794 | Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the | |
| 5795 | DDR memory are dynamically programmed matching the total size | |
| 5796 | of the equipped memory (DIMM modules). | |
| 5797 | ||
| 5798 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5799 | ||
| 5800 | commit e2ebe696818939e2b974628be9c921ea3fe9de13 | |
| 5801 | Author: Stefan Roese <sr@denx.de> | |
| 5802 | Date: Wed Mar 7 16:39:36 2007 +0100 | |
| 5803 | ||
| 5804 | [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's | |
| 5805 | ||
| 5806 | This patch fixes a problem that occurs when 2 DIMM's are | |
| 5807 | used. This problem was first spotted and fixed by Gerald Jackson | |
| 5808 | <gerald.jackson@reaonixsecurity.com> but this patch fixes the | |
| 5809 | problem in a little more clever way. | |
| 5810 | ||
| 5811 | This patch also adds the nice functionality to dynamically | |
| 5812 | create the TLB entries for the SDRAM (tlb.c). So we should | |
| 5813 | never run into such problems with wrong (too short) TLB | |
| 5814 | initialization again on these platforms. | |
| 5815 | ||
| 5816 | As this feature is new to the "old" 44x SPD DDR driver, it | |
| 5817 | has to be enabled via the CONFIG_PROG_SDRAM_TLB define. | |
| 5818 | ||
| 5819 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5820 | ||
| 5821 | commit 39218433983417b9df087976a79e3f80dd5e83d6 | |
| 5822 | Author: Wolfgang Denk <wd@denx.de> | |
| 5823 | Date: Wed Mar 7 16:33:44 2007 +0100 | |
| 5824 | ||
| 5825 | UC101: fix compiler warnings | |
| 5826 | ||
| 5827 | commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce | |
| 5828 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 5829 | Date: Wed Mar 7 16:19:46 2007 +0100 | |
| 5830 | ||
| 5831 | HMI1001: fix build error, cleanup compiler warnings. | |
| 5832 | ||
| 5833 | commit ad5bb451ade552c44bef9119d907929ebc2c126f | |
| 5834 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 5835 | Date: Tue Mar 6 18:08:43 2007 +0100 | |
| 5836 | ||
| 5837 | Restructure POST directory to support of other CPUs, boards, etc. | |
| 5838 | ||
| 5839 | commit a5284efd125967675b2e9c6ef7b95832268ad360 | |
| 5840 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 5841 | Date: Tue Mar 6 18:01:47 2007 +0100 | |
| 5842 | ||
| 5843 | Fix HOSTARCH handling. | |
| 5844 | Patch by Mike Frysinger, Mar 05 2007 | |
| 5845 | ||
| 5846 | commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44 | |
| 5847 | Author: Stefan Roese <sr@denx.de> | |
| 5848 | Date: Tue Mar 6 07:47:04 2007 +0100 | |
| 5849 | ||
| 5850 | [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup | |
| 5851 | ||
| 5852 | As provided by the AMCC applications team, this patch optimizes the | |
| 5853 | DDR2 setup for 166MHz bus speed. The values provided are also save | |
| 5854 | to use on a "normal" 133MHz PLB bus system. Only the refresh counter | |
| 5855 | setup has to be adjusted as done in this patch. | |
| 5856 | ||
| 5857 | For this the NAND booting version had to include the "speed.c" file | |
| 5858 | from the cpu/ppc4xx directory. With this addition the NAND SPL image | |
| 5859 | will just fit into the 4kbytes of program space. gcc version 4.x as | |
| 5860 | provided with ELDK 4.x is needed to generate this optimized code. | |
| 5861 | ||
| 5862 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 5863 | ||
| 2a26ec47 WD |
5864 | commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68 |
| 5865 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 5866 | Date: Sun Mar 4 01:36:05 2007 +0100 | |
| 5867 | ||
| 5868 | Some code cleanup. | |
| 5869 | ||
| 2a8dfe08 WD |
5870 | commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148 |
| 5871 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 5872 | Date: Wed Feb 28 00:02:04 2007 -0600 | |
| 5873 | ||
| 5874 | mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings | |
| 5875 | ||
| 5876 | (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit) | |
| 5877 | ||
| 5878 | commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf | |
| 5879 | Author: Kumar Gala <galak@kernel.crashing.org> | |
| 5880 | Date: Tue Feb 27 23:51:42 2007 -0600 | |
| 5881 | ||
| 5882 | mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode | |
| 5883 | ||
| 5884 | The config value for: | |
| 5885 | * CFG_ACR_PIPE_DEP | |
| 5886 | * CFG_ACR_RPTCNT | |
| 5887 | * CFG_SPCR_TSEC1EP | |
| 5888 | * CFG_SPCR_TSEC2EP | |
| 5889 | * CFG_SCCR_TSEC1CM | |
| 5890 | * CFG_SCCR_TSEC2CM | |
| 5891 | ||
| 5892 | Were not being used when setting the appropriate register | |
| 5893 | ||
| 5894 | Added: | |
| 5895 | * CFG_SCCR_USBMPHCM | |
| 5896 | * CFG_SCCR_USBDRCM | |
| 5897 | * CFG_SCCR_PCICM | |
| 5898 | * CFG_SCCR_ENCCM | |
| 5899 | ||
| 5900 | To allow full config of the SCCR. | |
| 5901 | ||
| 5902 | Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349 | |
| 5903 | that were just bogus. | |
| 5904 | ||
| 5905 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
| 5906 | ||
| 5907 | commit d51b3cf371cd441030460ef19d36b2924c361b1a | |
| 5908 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 5909 | Date: Thu Feb 22 20:06:57 2007 -0600 | |
| 5910 | ||
| 5911 | mpc83xx: update [local-]mac-address properties on UEC based devices | |
| 5912 | ||
| 5913 | 8360 and 832x weren't updating their [local-]mac-address | |
| 5914 | properties. This patch fixes that. | |
| 5915 | ||
| 5916 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 5917 | ||
| 5918 | commit 61f4f912acbe60776c5e00df1ec94094ce672957 | |
| 5919 | Author: Timur Tabi <timur@freescale.com> | |
| 5920 | Date: Tue Feb 13 10:41:42 2007 -0600 | |
| 5921 | ||
| 5922 | mpc83xx: write MAC address to mac-address and local-mac-address | |
| 5923 | ||
| 5924 | Some device trees have a mac-address property, some have local-mac-address, | |
| 5925 | and some have both. To support all of these device trees, this patch | |
| 5926 | updates ftp_cpu_setup() to write the MAC address to mac-address if it exists. | |
| 5927 | This function already updates local-mac-address. | |
| 5928 | ||
| 5929 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 5930 | ||
| 5931 | commit 22d71a71f57fd5d38b27ac3848e50d790360a598 | |
| 5932 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 5933 | Date: Tue Feb 27 18:41:08 2007 -0600 | |
| 5934 | ||
| 5935 | mpc83xx: add command line editing by default | |
| 5936 | ||
| 5937 | commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca | |
| 5938 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 5939 | Date: Wed Feb 14 19:50:53 2007 -0600 | |
| 5940 | ||
| 5941 | mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers | |
| 5942 | ||
| 5943 | Disable G1TXCLK, G2TXCLK h/w buffers. This patch | |
| 5944 | fixes a networking timeout issue with MPC8360EA (Rev.2) PBs. | |
| 5945 | ||
| 5946 | Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards. | |
| 5947 | ||
| 5948 | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> | |
| 5949 | Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com> | |
| 5950 | ||
| 5951 | commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f | |
| 5952 | Author: Xie Xiaobo <r63061@freescale.com> | |
| 5953 | Date: Wed Feb 14 18:27:17 2007 +0800 | |
| 5954 | ||
| 5955 | mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx | |
| 5956 | ||
| 5957 | The code supply fixed and SPD initialization for MPC83xx DDR2 Controller. | |
| 5958 | it pass DDR/DDR2 compliance tests. | |
| 5959 | ||
| 5960 | Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> | |
| 5961 | ||
| 5962 | commit b110f40bd180c6b560276589beedf753e97c46ce | |
| 5963 | Author: Xie Xiaobo <r63061@freescale.com> | |
| 5964 | Date: Wed Feb 14 18:27:06 2007 +0800 | |
| 5965 | ||
| 5966 | mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS | |
| 5967 | ||
| 5968 | MPC8360E rev2.0 have new spridr,and PVR value, | |
| 5969 | The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM. | |
| 5970 | ||
| 5971 | Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> | |
| 5972 | ||
| 5973 | commit 8d172c0f0d85998a256a95b7459a5403a30380ed | |
| 5974 | Author: Xie Xiaobo <r63061@freescale.com> | |
| 5975 | Date: Wed Feb 14 18:26:44 2007 +0800 | |
| 5976 | ||
| 5977 | mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS | |
| 5978 | ||
| 5979 | MPC8349E rev3.1 have new spridr,and PVR value, | |
| 5980 | The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. | |
| 5981 | ||
| 5982 | Signed-off-by: Xie Xiaobo<X.Xie@freescale.com> | |
| 5983 | ||
| 5984 | commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b | |
| 5985 | Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> | |
| 5986 | Date: Wed Jan 31 11:04:19 2007 +0100 | |
| 5987 | ||
| 5988 | mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c | |
| 5989 | ||
| 5990 | Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0) | |
| 5991 | which is used to se if an slave will ACK after receiving its address. | |
| 5992 | ||
| 5993 | Correct i2c probing to use this method as the old method could upset | |
| 5994 | a slave as it wrote a data byte to it. | |
| 5995 | ||
| 5996 | Add a small delay in i2c_init() to let the controller | |
| 5997 | shutdown any ongoing I2C activity. | |
| 5998 | ||
| 5999 | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
| 6000 | ||
| 6001 | commit 7a78f148d6a7298e4fface680dc7eacd877b1aba | |
| 6002 | Author: Timur Tabi <timur@freescale.com> | |
| 6003 | Date: Wed Jan 31 15:54:29 2007 -0600 | |
| 6004 | ||
| 6005 | mpc83xx: Add support for the MPC8349E-mITX-GP | |
| 6006 | ||
| 6007 | Add support for the MPC8349E-mITX-GP, a stripped-down version of the | |
| 6008 | MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in | |
| 6009 | HRCW is 0) for the ITX and a README for the ITX and the ITX-GP. | |
| 6010 | ||
| 6011 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 6012 | ||
| 6013 | commit fab16807adad350f618024350c6950165c247c72 | |
| 6014 | Author: Timur Tabi <timur@freescale.com> | |
| 6015 | Date: Wed Jan 31 15:54:20 2007 -0600 | |
| 6016 | ||
| 6017 | mpc83xx: Delete sdram_init() for MPC8349E-mITX | |
| 6018 | ||
| 6019 | There is no SDRAM on any of the 8349 ITX variants, so function sdram_init() | |
| 6020 | never does anything. This patch deletes it. | |
| 6021 | ||
| 6022 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 6023 | ||
| 6024 | commit a87c856eb411b9365937d0d4b9c21e46adbe1c14 | |
| 6025 | Author: Dave Liu <daveliu@freescale.com> | |
| 6026 | Date: Fri Jan 19 10:43:26 2007 +0800 | |
| 6027 | ||
| 6028 | mpc83xx: Fix the LAW1/3 bug | |
| 6029 | ||
| 6030 | The patch solves the alignment problem of the local bus access windows to | |
| 6031 | render accessible the memory bank and PHY registers of UPC 1 (starting at | |
| 6032 | 0xf801 0000). What we actually did was to adjust the sizes of the bus | |
| 6033 | access windows so that the base address alignment requirement would be met. | |
| 6034 | ||
| 6035 | Signed-off-by: Chereji Marian <marian.chereji@freescale.com> | |
| 6036 | Signed-off-by: Gridish Shlomi <gridish@freescale.com> | |
| 6037 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 6038 | ||
| 6039 | commit 97c4b397dce236a7318b304667bf89e59d08b17c | |
| 6040 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 6041 | Date: Tue Jan 30 16:15:31 2007 -0600 | |
| 6042 | ||
| 6043 | mpc83xx: don't hang if watchdog configured on 8360, 832x | |
| 6044 | ||
| 6045 | don't hang if watchdog configured on 8360, 832x | |
| 6046 | ||
| 6047 | The watchdog programming model is the same across all 83xx devices; | |
| 6048 | make the code reflect that. | |
| 6049 | ||
| 6050 | commit b70047478570e371ce7223be342ce98afea0f7d6 | |
| 6051 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 6052 | Date: Tue Jan 30 16:15:21 2007 -0600 | |
| 6053 | ||
| 6054 | mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt | |
| 6055 | ||
| 6056 | protect memcpy to bad address if a local-mac-address is missing from dt | |
| 6057 | ||
| 6058 | commit 6752ed088c75c26a89b70c46b7326a4cd6015f29 | |
| 6059 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 6060 | Date: Tue Jan 30 16:15:04 2007 -0600 | |
| 6061 | ||
| 6062 | mpc83xx: make 8360 default environment fdt be 8360 (not 8349) | |
| 6063 | ||
| 6064 | make 8360 default environment fdt be 8360 (not 8349) | |
| 6065 | ||
| 6066 | commit a28899c910024a0226331df07207b1038c300c93 | |
| 6067 | Author: Emilian Medve <Emilian.Medve@freescale.com> | |
| 6068 | Date: Tue Jan 30 16:14:50 2007 -0600 | |
| 6069 | ||
| 6070 | mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC | |
| 6071 | ||
| 6072 | The problem is not gcc4 but the code itself. The BD_STATUS() macro can't | |
| 6073 | be used for busy-waiting since it strips the 'volatile' property from | |
| 6074 | the bd variable. gcc3 was working by pure luck. | |
| 6075 | ||
| 6076 | This is a follow on patch to "Fix the UEC driver bug of QE" | |
| 6077 | ||
| 6078 | commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89 | |
| 6079 | Author: Kumar Gala <galak@kernel.crashing.org> | |
| 6080 | Date: Tue Jan 30 14:08:30 2007 -0600 | |
| 6081 | ||
| 6082 | mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead | |
| 6083 | ||
| 6084 | The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all | |
| 6085 | MPC834X class processors. Change the protections from CONFIG_MPC8349 to | |
| 6086 | CONFIG_MPC834X so they are more generic. | |
| 6087 | ||
| 6088 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> | |
| 6089 | ||
| 6090 | commit ae246dc6c1937c291014eadd90b6d48c438c7cb0 | |
| 6091 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 6092 | Date: Thu Jan 25 13:40:55 2007 -0600 | |
| 6093 | ||
| 6094 | mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL | |
| 6095 | ||
| 6096 | commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb | |
| 6097 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 6098 | Date: Wed Jan 24 17:18:37 2007 -0600 | |
| 6099 | ||
| 6100 | mpc83xx: sort Makefile targets | |
| 6101 | ||
| 6102 | reordered targets alphabetically | |
| 6103 | ||
| 6104 | commit 91e25769771c1164ed63ffca0add49f934ae3343 | |
| 6105 | Author: Paul Gortmaker <paul.gortmaker@windriver.com> | |
| 6106 | Date: Tue Jan 16 11:38:14 2007 -0500 | |
| 6107 | ||
| 6108 | mpc83xx: U-Boot support for Wind River SBC8349 | |
| 6109 | ||
| 6110 | I've redone the SBC8349 support to match git-current, which | |
| 6111 | incorporates all the MPC834x updates from Freescale since the 1.1.6 | |
| 6112 | release, including the DDR changes. | |
| 6113 | ||
| 6114 | I've kept all the SBC8349 files as parallel as possible to the | |
| 6115 | MPC8349EMDS ones for ease of maintenance and to allow for easy | |
| 6116 | inspection of what was changed to support this board. Hence the SBC8349 | |
| 6117 | U-Boot has FDT support and everything else that the MPC8349EMDS has. | |
| 6118 | ||
| 6119 | Fortunately the Freescale updates added support for boards using CS0, | |
| 6120 | but I had to change spd_sdram.c to allow for board specific settings for | |
| 6121 | the sdram_clk_cntl (it is/was hard coded to zero, and that remains the | |
| 6122 | default if the board doesn't specify a value.) | |
| 6123 | ||
| 6124 | Hopefully this should be mergeable as-is and require no whitespace | |
| 6125 | cleanups or similar, but if something doesn't measure up then let me | |
| 6126 | know and I'll fix it. | |
| 6127 | ||
| 6128 | Thanks, | |
| 6129 | Paul. | |
| 6130 | ||
| 6131 | commit 05031db456ab227f3e3752f37b9b812b65bb83ad | |
| 6132 | Author: Sam Song <samsongshu@yahoo.com.cn> | |
| 6133 | Date: Thu Dec 14 19:03:21 2006 +0800 | |
| 6134 | ||
| 6135 | mpc83xx: Remove a redundant semicolon in mpc8349itx.c | |
| 6136 | ||
| 6137 | A redundant semicolon existed in mpc8349itx.c | |
| 6138 | should be removed. | |
| 6139 | ||
| 6140 | Signed-off-by: Sam Song <samsongshu@yahoo.com.cn> | |
| 6141 | ||
| 6142 | commit f35f358241c549be3f75cfe2eaa642914275b7ba | |
| 6143 | Author: Jerry Van Baren <gerald.vanbaren@comcast.net> | |
| 6144 | Date: Wed Dec 6 21:23:55 2006 -0500 | |
| 6145 | ||
| 6146 | mpc83xx: Put the version (and magic) after the HRCW. | |
| 6147 | ||
| 6148 | Put the version (and magic) after the HRCW. This puts it in a fixed | |
| 6149 | location in flash, not at the start of flash but as close as we can get. | |
| 6150 | ||
| 6151 | Signed-off-by: Jerry Van Baren <vanbaren@cideas.com> | |
| 6152 | ||
| 6153 | commit 48aecd969171a6e99a55fae04933857787f9a5bd | |
| 6154 | Author: Dave Liu <r63238@freescale.com> | |
| 6155 | Date: Thu Dec 7 21:14:51 2006 +0800 | |
| 6156 | ||
| 6157 | mpc83xx: Add the MPC832XEMDS board readme | |
| 6158 | ||
| 6159 | Add the MPC832XEMDS board readme | |
| 6160 | ||
| 6161 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 6162 | ||
| 6163 | commit 24c3aca3f1358b113d3215adb5433b156e99f72b | |
| 6164 | Author: Dave Liu <r63238@freescale.com> | |
| 6165 | Date: Thu Dec 7 21:13:15 2006 +0800 | |
| 6166 | ||
| 6167 | mpc83xx: Add support for the MPC832XEMDS board | |
| 6168 | ||
| 6169 | This patch supports DUART, ETH3/4 and PCI etc. | |
| 6170 | ||
| 6171 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 6172 | ||
| 6173 | commit e080313c32322e15ab5a18eb896a252858c57284 | |
| 6174 | Author: Dave Liu <r63238@freescale.com> | |
| 6175 | Date: Thu Dec 7 21:11:58 2006 +0800 | |
| 6176 | ||
| 6177 | mpc83xx: streamline the 83xx immr head file | |
| 6178 | ||
| 6179 | For better format and style, I streamlined the 83xx head files, | |
| 6180 | including immap_83xx.h and mpc83xx.h. In the old head files, 1) | |
| 6181 | duplicated macro definition appear in the both files; 2) the structure | |
| 6182 | of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The | |
| 6183 | macro definition put inside the each structure. So, I cleaned up the | |
| 6184 | structure of QE immr from immap_83xx.h, deleted the duplicated stuff and | |
| 6185 | moved the macro definition to mpc83xx.h, Just like MPC8260. | |
| 6186 | ||
| 6187 | CHANGELOG | |
| 6188 | ||
| 6189 | *streamline the 83xx immr head file | |
| 6190 | ||
| 6191 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 6192 | ||
| 6193 | commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0 | |
| 6194 | Author: Dave Liu <r63238@freescale.com> | |
| 6195 | Date: Wed Dec 6 11:38:17 2006 +0800 | |
| 6196 | ||
| 6197 | mpc83xx: Fix the UEC driver bug of QE | |
| 6198 | ||
| 6199 | The patch prevents the GCC tool chain from striping useful code for | |
| 6200 | optimization. It will make UEC ethernet driver workable, Otherwise the | |
| 6201 | UEC will fail in tx when you are using gcc4.x. but the driver can work | |
| 6202 | when using gcc3.4.3. | |
| 6203 | ||
| 6204 | CHANGELOG | |
| 6205 | ||
| 6206 | *Prevent the GCC from striping code for optimization, Otherwise the UEC | |
| 6207 | will tx failed when you are using gcc4.x. | |
| 6208 | ||
| 6209 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 6210 | ||
| 769104c9 WD |
6211 | commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35 |
| 6212 | Author: Stefan Roese <sr@denx.de> | |
| 6213 | Date: Thu Mar 1 21:11:36 2007 +0100 | |
| 6214 | ||
| 6215 | [PATCH] Update AMCC Katmai 440SPe eval board support | |
| 6216 | ||
| 6217 | This patch updates the recently added Katmai board support. The biggest | |
| 6218 | change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2 | |
| 6219 | driver. | |
| 6220 | ||
| 6221 | Please note, that still some problems are left with some memory | |
| 6222 | configurations. See the driver for more details. | |
| 6223 | ||
| 6224 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6225 | ||
| 6226 | commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a | |
| 6227 | Author: Stefan Roese <sr@denx.de> | |
| 6228 | Date: Thu Mar 1 07:03:25 2007 +0100 | |
| 6229 | ||
| 6230 | [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM | |
| 6231 | ||
| 6232 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6233 | ||
| 6234 | commit ccbc7036648e465697ca298ba51e0e76dda352a0 | |
| 6235 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6236 | Date: Wed Feb 28 01:28:53 2007 +0100 | |
| 6237 | ||
| 6238 | SC3: fix typo in default environment | |
| 6239 | ||
| 6240 | commit e344568b1b46af85ec32d815586f91bc115d6223 | |
| 6241 | Author: Sergei Poselenov <sposelenov@emcraft.com> | |
| 6242 | Date: Tue Feb 27 20:15:30 2007 +0300 | |
| 6243 | ||
| 6244 | MCC200: Fixes for update procedure | |
| 6245 | ||
| 6246 | - fix logic error in image type handling | |
| 6247 | - make sure file system images (cramfs etc.) get stored in flash | |
| 6248 | with image header stripped so they can be mounted through MTD | |
| 6249 | ||
| 6250 | commit 743571145b37182757d4e688a77860b36ee77573 | |
| 6251 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6252 | Date: Tue Feb 27 14:26:04 2007 +0100 | |
| 6253 | ||
| 6254 | Minor code cleanup. | |
| 6255 | ||
| 74357114 WD |
6256 | commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72 |
| 6257 | Author: Sergei Poselenov <sposelenov@emcraft.com> | |
| 6258 | Date: Tue Feb 27 12:40:16 2007 +0300 | |
| 6259 | ||
| 6260 | MCC200 update - add LCD Progress Indicator | |
| 6261 | ||
| 6262 | commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44 | |
| 6263 | Author: Stefan Roese <sr@denx.de> | |
| 6264 | Date: Thu Feb 22 07:43:34 2007 +0100 | |
| 6265 | ||
| 6266 | [PATCH] get_dev() now unconditionally uses manual relocation | |
| 6267 | ||
| 6268 | Since the relocation fix is not included yet and we're not sure how | |
| 6269 | it will be added, this patch removes code that required relocation | |
| 6270 | to be fixed for now. | |
| 6271 | ||
| 6272 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6273 | ||
| 6274 | commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b | |
| 6275 | Author: Stefan Roese <sr@denx.de> | |
| 6276 | Date: Thu Feb 22 07:40:23 2007 +0100 | |
| 6277 | ||
| 6278 | [PATCH] Change systemace driver to select 8 & 16bit mode | |
| 6279 | ||
| 6280 | As suggested by Grant Likely this patch enables the Xilinx SystemACE | |
| 6281 | driver to select 8 or 16bit mode upon startup. | |
| 6282 | ||
| 6283 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6284 | ||
| 6285 | commit 3a197b2fe49d6fa03978e60af2394efe9c70b527 | |
| 6286 | Author: Haiying Wang <Haiying.Wang@freescale.com> | |
| 6287 | Date: Wed Feb 21 16:52:31 2007 +0100 | |
| 6288 | ||
| 6289 | [PATCH v3] Add sync to ensure flash_write_cmd is fully finished | |
| 6290 | ||
| 6291 | Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command | |
| 6292 | is fully finished. The sync() is defined in each CPU's io.h file. For | |
| 6293 | those CPUs which do not need sync for now, a dummy sync() is defined in | |
| 6294 | their io.h as well. | |
| 6295 | ||
| 6296 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> | |
| 6297 | ||
| 6298 | commit da04995c7dc6772013a9a0dc5c767f190c402478 | |
| 6299 | Author: Stefan Roese <sr@denx.de> | |
| 6300 | Date: Wed Feb 21 13:44:34 2007 +0100 | |
| 6301 | ||
| 6302 | [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write) | |
| 6303 | ||
| 6304 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6305 | ||
| 6306 | commit 751bb57107d78978ae08e697c3deba816f5be091 | |
| 6307 | Author: Stefan Roese <sr@denx.de> | |
| 6308 | Date: Tue Feb 20 13:21:57 2007 +0100 | |
| 6309 | ||
| 6310 | [PATCH] Fix relocation problem with "new" get_dev() function | |
| 6311 | ||
| 6312 | This patch enables the "new" get_dev() function for block devices | |
| 6313 | introduced by Grant Likely to be used on systems that still suffer | |
| 6314 | from the relocation problems (manual relocation neede because of | |
| 6315 | problems with linker script). | |
| 6316 | ||
| 6317 | Hopefully we can resolve this relocation issue soon for all platform | |
| 6318 | so we don't need this additional code anymore. | |
| 6319 | ||
| 6320 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6321 | ||
| 6322 | commit d93e2212f962668b3dce091ff5edc33f2347fe37 | |
| 6323 | Author: Stefan Roese <sr@denx.de> | |
| 6324 | Date: Tue Feb 20 13:17:42 2007 +0100 | |
| 6325 | ||
| 6326 | [PATCH] Update SystemACE driver for 16bit access | |
| 6327 | ||
| 6328 | This patch removes some problems when the Xilinx SystemACE driver | |
| 6329 | is used with 16bit access on an big endian platform (like the | |
| 6330 | AMCC Katmai). | |
| 6331 | ||
| 6332 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6333 | ||
| 6334 | commit 874bb7b88fe9b4648e1288a387af2e31014a72f3 | |
| 6335 | Author: Stefan Roese <sr@denx.de> | |
| 6336 | Date: Tue Feb 20 13:15:40 2007 +0100 | |
| 6337 | ||
| 6338 | [PATCH] Clean up Katmai (440SPe) linker script | |
| 6339 | ||
| 6340 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6341 | ||
| 6342 | commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f | |
| 6343 | Author: Stefan Roese <sr@denx.de> | |
| 6344 | Date: Tue Feb 20 10:57:08 2007 +0100 | |
| 6345 | ||
| 6346 | [PATCH] Add support for the AMCC Katmai (440SPe) eval board | |
| 6347 | ||
| 6348 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6349 | ||
| 6350 | commit 0dc018ece13effc689e47479ea9ebf1c98a507f5 | |
| 6351 | Author: Stefan Roese <sr@denx.de> | |
| 6352 | Date: Tue Feb 20 10:51:26 2007 +0100 | |
| 6353 | ||
| 6354 | [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT | |
| 6355 | ||
| 6356 | This patch switches to the desired I2C bus when the date/dtt | |
| 6357 | commands are called. This can be configured using the | |
| 6358 | CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. | |
| 6359 | ||
| 6360 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6361 | ||
| 6362 | commit 4037ed3b63923cfcec27f784a89057c3cbabcedb | |
| 6363 | Author: Stefan Roese <sr@denx.de> | |
| 6364 | Date: Tue Feb 20 10:43:34 2007 +0100 | |
| 6365 | ||
| 6366 | [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support | |
| 6367 | ||
| 6368 | This patch adds support for the DDR2 controller used on the | |
| 6369 | 440SP and 440SPe. It is tested on the Katmai (440SPe) eval | |
| 6370 | board and works fine with the following DIMM modules: | |
| 6371 | ||
| 6372 | - Corsair CM2X512-5400C4 (512MByte per DIMM) | |
| 6373 | - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) | |
| 6374 | - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) | |
| 6375 | ||
| 6376 | This patch also adds the nice functionality to dynamically | |
| 6377 | create the TLB entries for the SDRAM (tlb.c). So we should | |
| 6378 | never run into such problems with wrong (too short) TLB | |
| 6379 | initialization again on these platforms. | |
| 6380 | ||
| 6381 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6382 | ||
| 6383 | commit 36d830c9830379045f5daa9f542ac1c990c70068 | |
| 6384 | Author: Stefan Roese <sr@denx.de> | |
| 6385 | Date: Tue Feb 20 10:35:42 2007 +0100 | |
| 6386 | ||
| 6387 | [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files | |
| 6388 | ||
| 6389 | Since the existing 4xx SPD SDRAM initialization routines for the | |
| 6390 | 405 SDRAM controller and the 440 DDR controller don't have much in | |
| 6391 | common this patch splits both drivers into different files. | |
| 6392 | ||
| 6393 | This is in preparation for the 440 DDR2 controller support (440SP/e). | |
| 6394 | ||
| 6395 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6396 | ||
| 6397 | commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6 | |
| 6398 | Author: Stefan Roese <sr@denx.de> | |
| 6399 | Date: Tue Feb 20 10:27:08 2007 +0100 | |
| 6400 | ||
| 6401 | [PATCH] PPC4xx: Add support for multiple I2C busses | |
| 6402 | ||
| 6403 | This patch adds support for multiple I2C busses on the PPC4xx | |
| 6404 | platforms. Define CONFIG_I2C_MULTI_BUS in the board config file | |
| 6405 | to make use of this feature. | |
| 6406 | ||
| 6407 | It also merges the 405 and 440 i2c header files into one common | |
| 6408 | file 4xx_i2c.h. | |
| 6409 | ||
| 6410 | Also the 4xx i2c reset procedure is reworked since I experienced | |
| 6411 | some problems with the first access on the 440SPe Katmai board. | |
| 6412 | ||
| 6413 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6414 | ||
| 6415 | commit eb867a76238fb38e952c37871b16d0d7fd61c95f | |
| 6416 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 6417 | Date: Tue Feb 20 09:05:45 2007 +0100 | |
| 6418 | ||
| 6419 | [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers | |
| 6420 | ||
| 6421 | Block device read/write is anonymous data; there is no need to use a | |
| 6422 | typed pointer. void * is fine. Also add a hook for block_read functions | |
| 6423 | ||
| 6424 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 6425 | ||
| 6426 | commit 53758fa20e935cc87eeb0519ed365df753a6f289 | |
| 6427 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 6428 | Date: Tue Feb 20 09:05:38 2007 +0100 | |
| 6429 | ||
| 6430 | [PATCH 8_9] Add block_write hook to block_dev_desc_t | |
| 6431 | ||
| 6432 | Preparation for future patches which support block device writing | |
| 6433 | ||
| 6434 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 6435 | ||
| 6436 | commit f4852ebe6ca946a509667eb68be42026f837be76 | |
| 6437 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 6438 | Date: Tue Feb 20 09:05:31 2007 +0100 | |
| 6439 | ||
| 6440 | [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros | |
| 6441 | ||
| 6442 | Register read/write does not need to be wrapped in a full function. The | |
| 6443 | patch replaces them with macros. | |
| 6444 | ||
| 6445 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 6446 | ||
| 6447 | commit 3a8ce9af6fcb5744a7851b4440c07688acc40844 | |
| 6448 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 6449 | Date: Tue Feb 20 09:05:23 2007 +0100 | |
| 6450 | ||
| 6451 | [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c | |
| 6452 | ||
| 6453 | The code in this file is not a command; it is a device driver. Put it in | |
| 6454 | the correct place. There are zero functional changes in this patch, it | |
| 6455 | only moves the file. | |
| 6456 | ||
| 6457 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 6458 | ||
| 6459 | commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4 | |
| 6460 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 6461 | Date: Tue Feb 20 09:05:16 2007 +0100 | |
| 6462 | ||
| 6463 | [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent) | |
| 6464 | ||
| 6465 | This patch is in preparation of additional changes to the sysace driver. | |
| 6466 | May as well take this opportunity to fixup the inconsistent whitespace since | |
| 6467 | this file is about to undergo major changes anyway. | |
| 6468 | ||
| 6469 | There are zero functional changes in this patch. It only cleans up the | |
| 6470 | the whitespace. | |
| 6471 | ||
| 6472 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 6473 | ||
| 6474 | commit 80ba981d940471fe7e539e64fa3d2bd80002beda | |
| 6475 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 6476 | Date: Tue Feb 20 09:05:07 2007 +0100 | |
| 6477 | ||
| 6478 | [PATCH 4_4] Remove local implementation of isprint() in ft_build.c | |
| 6479 | ||
| 6480 | isprint is already defined in ctype.c | |
| 6481 | ||
| 6482 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 6483 | ||
| 6484 | commit c95c4280d751ca078c2ff58228d2f2b44ccf0600 | |
| 6485 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 6486 | Date: Tue Feb 20 09:05:00 2007 +0100 | |
| 6487 | ||
| 6488 | [PATCH 3_9] Move buffer print code from md command to common function | |
| 6489 | ||
| 6490 | Printing a buffer is a darn useful thing. Move the buffer print code | |
| 6491 | into print_buffer() in lib_generic/ | |
| 6492 | ||
| 6493 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 6494 | ||
| 6495 | commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a | |
| 6496 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 6497 | Date: Tue Feb 20 09:04:52 2007 +0100 | |
| 6498 | ||
| 6499 | [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets | |
| 6500 | ||
| 6501 | Change the xilinx device drivers and board code to include config.h | |
| 6502 | instead of xparameters.h directly. config.h always includes the | |
| 6503 | correct xparameters file. This change reduces the posibility of | |
| 6504 | including the wrong file when adding a new xilinx board port | |
| 6505 | ||
| 6506 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 6507 | ||
| 6508 | commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7 | |
| 6509 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 6510 | Date: Tue Feb 20 09:04:34 2007 +0100 | |
| 6511 | ||
| 6512 | [PATCH 1_4] Merge common get_dev() routines for block devices | |
| 6513 | ||
| 6514 | Each of the filesystem drivers duplicate the get_dev routine. This change | |
| 6515 | merges them into a single function in part.c | |
| 6516 | ||
| 6517 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 6518 | ||
| 6519 | commit f5fcc3c20b65554e98a165542c36ee0c610a2d81 | |
| 6520 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6521 | Date: Mon Feb 19 23:09:51 2007 +0100 | |
| 6522 | ||
| 6523 | MCC200: Software Updater: allow both "ramdisk" and "filesystem" types | |
| 6524 | as root file system images. | |
| 6525 | ||
| 6526 | commit 489c696ae7211218961d159e43e722d74c36fcbc | |
| 6527 | Author: Sergei Poselenov <sposelenov@emcraft.com> | |
| 6528 | Date: Wed Feb 14 14:30:28 2007 +0300 | |
| 6529 | ||
| 6530 | MCC200: Extensions to Software Update Mechanism | |
| 6531 | ||
| 6532 | Update / extend Software Update Mechanism for MCC200 board: | |
| 6533 | ||
| 6534 | - Add support for rootfs image added. The environment variables | |
| 6535 | "rootfs_st" and "rootfs_nd" can be used to override the default | |
| 6536 | values of the image start and end. | |
| 6537 | - Remove excessive key check code. | |
| 6538 | - Code cleanup. | |
| 6539 | ||
| 6540 | commit 4be23a12f23f1372634edc3215137b09768b7949 | |
| 6541 | Author: Stefan Roese <sr@denx.de> | |
| 6542 | Date: Mon Feb 19 08:23:15 2007 +0100 | |
| 6543 | ||
| 6544 | [PATCH] Update Sequoia EBC configuration (NOR FLASH) | |
| 6545 | ||
| 6546 | As spotted by Matthias Fuchs, the READY input should not be | |
| 6547 | enabled for the NOR FLASH on the Sequoia board. | |
| 6548 | ||
| 6549 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6550 | ||
| 769104c9 WD |
6551 | commit 2605e90bf676d48123afe5719a846d2b52b24aac |
| 6552 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 6553 | Date: Fri Feb 16 07:57:42 2007 +0100 | |
| 6554 | ||
| 6555 | [PATCH] Added support for the jupiter board. | |
| 6556 | ||
| 6557 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 6558 | ||
| 74357114 WD |
6559 | commit 497d012e5be0194e1084073d0081eb1a844796b2 |
| 6560 | Author: Gary Jennejohn <garyj@pollux.denx.de> | |
| 6561 | Date: Mon Feb 12 13:11:50 2007 +0100 | |
| 6562 | ||
| 6563 | LPC2292: patch from Siemens. | |
| 6564 | ||
| 6565 | commit b0b1a920aebead0d44146e73676ae9d80fffc8e2 | |
| 6566 | Author: Stefan Roese <sr@denx.de> | |
| 6567 | Date: Sat Feb 10 08:49:31 2007 +0100 | |
| 6568 | ||
| 6569 | [PATCH] Add missing p3mx.h file to repository (ups) | |
| 6570 | ||
| 6571 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6572 | ||
| 6573 | commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a | |
| 6574 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 6575 | Date: Fri Feb 9 10:45:42 2007 +0100 | |
| 6576 | ||
| 6577 | [Motion-PRO] Preliminary support for the Motion-PRO board. | |
| 6578 | ||
| 6579 | commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994 | |
| 6580 | Author: Stefan Roese <sr@denx.de> | |
| 6581 | Date: Wed Feb 7 16:51:08 2007 +0100 | |
| 6582 | ||
| 6583 | [PATCH] Update some AMCC 4xx board config files (set initrd_high) | |
| 6584 | ||
| 6585 | Some boards that can have more than 768MBytes of SDRAM need to | |
| 6586 | set "initrd_high", so that the initrd can be accessed by the | |
| 6587 | Linux kernel. | |
| 6588 | ||
| 6589 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6590 | ||
| 6591 | commit 7372ca68227930d03cffa548310524cad5b96733 | |
| 6592 | Author: Stefan Roese <sr@denx.de> | |
| 6593 | Date: Fri Feb 2 12:44:22 2007 +0100 | |
| 6594 | ||
| 6595 | [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards | |
| 6596 | ||
| 6597 | Previously the strapping DCR/SDR was read to determine if the internal PCI | |
| 6598 | arbiter is enabled or not. This strapping bit can be overridden, so now | |
| 6599 | the current status is read from the correct DCR/SDR register. | |
| 6600 | ||
| 6601 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6602 | ||
| 6603 | commit 2aa54f651a42d198673318f07a20c89a43e4d197 | |
| 6604 | Author: Stefan Roese <sr@denx.de> | |
| 6605 | Date: Fri Feb 2 12:42:08 2007 +0100 | |
| 6606 | ||
| 6607 | [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier | |
| 6608 | ||
| 6609 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6610 | ||
| 6611 | commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b | |
| 6612 | Author: Stefan Roese <sr@denx.de> | |
| 6613 | Date: Thu Feb 1 13:22:41 2007 +0100 | |
| 6614 | ||
| 6615 | [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file | |
| 6616 | ||
| 6617 | When PCI PNP is enabled the pci pnp configuration routine is called | |
| 6618 | which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some | |
| 6619 | problems with some PCI cards. For now disable the PCI PNP configuration. | |
| 6620 | ||
| 6621 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6622 | ||
| 6623 | commit 2902fadade3be7659467e8d074048c6b7068f5c0 | |
| 6624 | Author: Stefan Roese <sr@denx.de> | |
| 6625 | Date: Wed Jan 31 16:56:10 2007 +0100 | |
| 6626 | ||
| 6627 | [PATCH] Update 440EPx/440GRx cpu detection | |
| 6628 | ||
| 6629 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6630 | ||
| 6631 | commit d5ea287b02a6945c3977410e364a879dd1a555c8 | |
| 6632 | Author: Stefan Roese <sr@denx.de> | |
| 6633 | Date: Wed Jan 31 16:38:04 2007 +0100 | |
| 6634 | ||
| 6635 | [PATCH] Update esd cpci5200 files | |
| 6636 | ||
| 6637 | Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> | |
| 6638 | ||
| 6639 | commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab | |
| 6640 | Author: Stefan Roese <sr@denx.de> | |
| 6641 | Date: Wed Jan 31 16:37:34 2007 +0100 | |
| 6642 | ||
| 6643 | [PATCH] Add support for esd mecp5200 board | |
| 6644 | ||
| 6645 | Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> | |
| 6646 | ||
| 6647 | commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff | |
| 6648 | Author: Stefan Roese <sr@denx.de> | |
| 6649 | Date: Wed Jan 31 12:38:50 2007 +0100 | |
| 6650 | ||
| 6651 | [PATCH] Remove unneccessary yellowstone board config file | |
| 6652 | ||
| 6653 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6654 | ||
| 6655 | commit e802594b6fa1b166308820c276b96dc0d7cc731c | |
| 6656 | Author: Stefan Roese <sr@denx.de> | |
| 6657 | Date: Tue Jan 30 17:06:10 2007 +0100 | |
| 6658 | ||
| 6659 | [PATCH] Update Sequoia (440EPx) config file | |
| 6660 | ||
| 6661 | The config file now handles the 2nd target, the Rainier (440GRx) | |
| 6662 | evaluation board better. Additionally the PPC input clock was | |
| 6663 | adjusted to match the correct value of 33.0 MHz. | |
| 6664 | ||
| 6665 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6666 | ||
| 6667 | commit 700200c67e73b83751418abe7815840dca8fd6cb | |
| 6668 | Author: Stefan Roese <sr@denx.de> | |
| 6669 | Date: Tue Jan 30 17:04:19 2007 +0100 | |
| 6670 | ||
| 6671 | [PATCH] Merge Yosemite & Yellowstone board ports | |
| 6672 | ||
| 6673 | Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR) | |
| 6674 | share one config file and all board specific files. This way we | |
| 6675 | don't have to maintain two different sets of files for nearly | |
| 6676 | identical boards. | |
| 6677 | ||
| 6678 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6679 | ||
| 6680 | commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6 | |
| 6681 | Author: Stefan Roese <sr@denx.de> | |
| 6682 | Date: Tue Jan 30 15:01:49 2007 +0100 | |
| 6683 | ||
| 6684 | [PATCH] Update Prodrive SCPU (PDNB3 variant) board | |
| 6685 | ||
| 6686 | SCPU doesn't use redundant environment in flash. | |
| 6687 | ||
| 6688 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6689 | ||
| 6690 | commit 6304430ed642ea8fa15c9e5af965ac2e033eec45 | |
| 6691 | Author: Stefan Roese <sr@denx.de> | |
| 6692 | Date: Tue Jan 30 12:51:07 2007 +0100 | |
| 6693 | ||
| 6694 | [PATCH] alpr: Update alpr board config file | |
| 6695 | ||
| 6696 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6697 | ||
| 6698 | commit f8db84f132b1e335f20f96138a1f09ed97b08664 | |
| 6699 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6700 | Date: Tue Jan 30 00:50:40 2007 +0100 | |
| 6701 | ||
| 6702 | LPC2292 SODIMM port coding style cleanup. | |
| 6703 | ||
| f8db84f1 WD |
6704 | commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 |
| 6705 | Author: Gary Jennejohn <garyj@pollux.denx.de> | |
| 6706 | Date: Wed Jan 24 12:16:56 2007 +0100 | |
| 6707 | ||
| 6708 | Add port for the lpc2292sodimm evaluation board from EmbeddedArtists | |
| 6709 | ||
| 6710 | commit 2daf046ba627f85f44195815778140039636244e | |
| 6711 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 6712 | Date: Tue Jan 23 17:22:06 2007 +0100 | |
| 6713 | ||
| 6714 | [iDMR] Add MTD and JFFS2 support, also add default partition definition. | |
| 6715 | ||
| 6716 | commit f7db33101fbc9c8f0a10738ce87034875a17aeb9 | |
| 6717 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 6718 | Date: Tue Jan 23 14:21:14 2007 +0100 | |
| 6719 | ||
| 6720 | [iDMR] Flash driver on initialisation write-protects some sectors, | |
| 6721 | currently sectors 0-3. Sector 3 does not need to be protected, though | |
| 6722 | (U-boot occupies sectors 0-1 and the environment sector 2). This commit | |
| 6723 | fixes this, i.e., only sectors 0-2 are protected. | |
| 6724 | ||
| 6725 | commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de | |
| 6726 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 6727 | Date: Tue Jan 23 14:11:22 2007 +0100 | |
| 6728 | ||
| 6729 | [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g., | |
| 6730 | "mii device" results in "Unexpected exception"). Fixing this properly | |
| 6731 | requires some clean-up in the FEC drivers infrastructure for ColdFire, so | |
| 6732 | this commit disables MII commads for now. | |
| 6733 | ||
| 6734 | commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c | |
| 6735 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 6736 | Date: Tue Jan 23 13:25:22 2007 +0100 | |
| 6737 | ||
| 6738 | [ColdFire MCF5271 family] Add CPU detection based on the value of Chip | |
| 6739 | Identification Register (CIR). | |
| 6740 | ||
| 2a26ec47 WD |
6741 | commit fdef388758506765d4d6a7155c8f1584c63ff581 |
| 6742 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 6743 | Date: Mon Jan 22 13:19:21 2007 +0800 | |
| 6744 | ||
| 6745 | use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP | |
| 6746 | The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 | |
| 6747 | fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support | |
| 6748 | mpc7448hpc2 board. | |
| 6749 | ||
| f8db84f1 WD |
6750 | commit a4012396645533aef218354eeba754dff0deace8 |
| 6751 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6752 | Date: Fri Jan 19 23:08:39 2007 +0100 | |
| 6753 | ||
| 6754 | Minor code cleanup. | |
| 6755 | ||
| a4012396 WD |
6756 | commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39 |
| 6757 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 6758 | Date: Fri Jan 19 19:57:10 2007 +0100 | |
| 6759 | ||
| 6760 | [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT. | |
| 6761 | ||
| 6762 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 6763 | ||
| 6764 | commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167 | |
| 6765 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 6766 | Date: Fri Jan 19 18:05:26 2007 +0100 | |
| 6767 | ||
| 6768 | [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver | |
| 6769 | if you must swap the bytes between reading/writing. | |
| 6770 | (Needed for the SC3 board) | |
| 6771 | ||
| 6772 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 6773 | ||
| 6774 | commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276 | |
| 6775 | Author: Stefan Roese <sr@denx.de> | |
| 6776 | Date: Thu Jan 18 16:05:47 2007 +0100 | |
| 6777 | ||
| 6778 | [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board | |
| 6779 | ||
| 6780 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6781 | ||
| 6782 | commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e | |
| 6783 | Author: Stefan Roese <sr@denx.de> | |
| 6784 | Date: Thu Jan 18 11:54:52 2007 +0100 | |
| 6785 | ||
| 6786 | [PATCH] Update Prodrive P3Mx support | |
| 6787 | ||
| 6788 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6789 | ||
| 6790 | commit 34167a36c29ee946b727465db5c014746a08e978 | |
| 6791 | Author: Stefan Roese <sr@denx.de> | |
| 6792 | Date: Thu Jan 18 11:48:10 2007 +0100 | |
| 6793 | ||
| 6794 | [PATCH] Add missing Taishan config file | |
| 6795 | ||
| 6796 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6797 | ||
| 6798 | commit cb4820725e9fc409c5cbc8e83054a6ed522d2111 | |
| 6799 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 6800 | Date: Thu Jan 18 11:28:51 2007 +0100 | |
| 6801 | ||
| 6802 | [PATCH] Fix: Compilerwarnings for SC3 board. | |
| 6803 | The EBC Configuration Register is now by CFG_EBC_CFG definable | |
| 6804 | Added JFFS2 support for the SC3 board. | |
| 6805 | ||
| 6806 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 6807 | ||
| 6808 | commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd | |
| 6809 | Author: Stefan Roese <sr@denx.de> | |
| 6810 | Date: Thu Jan 18 10:25:34 2007 +0100 | |
| 6811 | ||
| 6812 | [PATCH] Add support for AMCC Taishan PPC440GX eval board | |
| 6813 | ||
| 6814 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6815 | ||
| 6816 | commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad | |
| 6817 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6818 | Date: Tue Jan 16 18:30:50 2007 +0100 | |
| 6819 | ||
| 6820 | Raname solidcard3 into sc3; add redundant env for sc3 | |
| 6821 | ||
| 6d3e0107 WD |
6822 | commit 1bbbbdd20fcec9933697000dcf55ff7972622596 |
| 6823 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6824 | Date: Tue Jan 16 12:46:35 2007 +0100 | |
| 6825 | ||
| 6826 | Update default environment for Solidcard3 | |
| 6827 | ||
| f11033e7 WD |
6828 | commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd |
| 6829 | Author: Stefan Roese <sr@denx.de> | |
| 6830 | Date: Mon Jan 15 09:46:29 2007 +0100 | |
| 6831 | ||
| 6832 | [PATCH] Fix 440SPe rev B detection from previous patch | |
| 6833 | ||
| 6834 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6835 | ||
| 6836 | commit a443d31410c571ee8f970da819a44d698fdd6b1f | |
| 6837 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 6838 | Date: Sun Jan 14 13:35:31 2007 +0100 | |
| 6839 | ||
| 6840 | [FIX] correct I2C Writes for the LM81 Sensor. | |
| 6841 | ||
| 6842 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 6843 | ||
| 6844 | commit 0bba5452835f19a61204edcda3a58112fd8e2208 | |
| 6845 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6846 | Date: Sat Jan 13 11:17:10 2007 +0100 | |
| 6847 | ||
| 6848 | Undo commit 3033ebb2: reset command does not take any arguments | |
| 6849 | ||
| 6850 | Haiying Wang's modification to the reset command was broken, undo it. | |
| 6851 | ||
| 6852 | Signed-off-by: Wolfgang Denk <wd@denx.de> | |
| 6853 | ||
| 6854 | commit 95981778cff0038fd9941044d6a3eda810e33258 | |
| 6855 | Author: Stefan Roese <sr@denx.de> | |
| 6856 | Date: Sat Jan 13 08:01:03 2007 +0100 | |
| 6857 | ||
| 6858 | [PATCH] Update 440SP(e) cpu revisions | |
| 6859 | ||
| 6860 | Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. | |
| 6861 | ||
| 6862 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6863 | ||
| 6864 | commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7 | |
| 6865 | Author: Stefan Roese <sr@denx.de> | |
| 6866 | Date: Sat Jan 13 07:59:56 2007 +0100 | |
| 6867 | ||
| 6868 | [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed | |
| 6869 | ||
| 6870 | Now the board revision and the current PCI bus speed are printed after | |
| 6871 | the board message. | |
| 6872 | ||
| 6873 | Also the EBC initialising is now done via defines in the board config | |
| 6874 | file. | |
| 6875 | ||
| 6876 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6877 | ||
| 6878 | commit 36adff362c2c0141ff8a810d42a7e478f779130f | |
| 6879 | Author: Stefan Roese <sr@denx.de> | |
| 6880 | Date: Sat Jan 13 07:59:19 2007 +0100 | |
| 6881 | ||
| 6882 | [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed | |
| 6883 | ||
| 6884 | Now the board revision and the current PCI bus speed are printed after | |
| 6885 | the board message. | |
| 6886 | ||
| 6887 | Also the EBC initialising is now done via defines in the board config | |
| 6888 | file. | |
| 6889 | ||
| 6890 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6891 | ||
| 6892 | commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6 | |
| 6893 | Author: Stefan Roese <sr@denx.de> | |
| 6894 | Date: Sat Jan 13 07:57:51 2007 +0100 | |
| 6895 | ||
| 6896 | [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed | |
| 6897 | ||
| 6898 | Now the board revision and the current PCI bus speed are printed after | |
| 6899 | the board message. | |
| 6900 | ||
| 6901 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 6902 | ||
| 6d3e0107 WD |
6903 | commit ca43ba18e910206ef8063e4b22d282630bff3fd2 |
| 6904 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 6905 | Date: Thu Jan 11 15:44:44 2007 +0100 | |
| 6906 | ||
| 6907 | Added support for the SOLIDCARD III board from Eurodesign | |
| 6908 | ||
| 6909 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 6910 | ||
| f11033e7 WD |
6911 | commit 6abaee42621c07e81a2cd189ad4368b5e8c50280 |
| 6912 | Author: Reinhard Thies <Reinhard.Thies@web.de> | |
| 6913 | Date: Wed Jan 10 14:41:14 2007 +0100 | |
| 6914 | ||
| 6915 | Adjusted default environment for cam5200 board. | |
| 6916 | ||
| 6917 | commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9 | |
| 6918 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6919 | Date: Wed Jan 10 15:35:52 2007 +0100 | |
| 6920 | ||
| 6921 | Update CHANGELOG | |
| 6922 | ||
| bab5a90d WD |
6923 | commit 787fa15860a57833e50bd30555079a9cd4e519b8 |
| 6924 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 6925 | Date: Wed Jan 10 01:28:39 2007 +0100 | |
| 6926 | ||
| 6927 | Fix auto_update for MCC200 board. | |
| 6928 | ||
| 6929 | The invocation of do_auto_update() is moved to the end of the | |
| 6930 | misc_init_r() function, after the flash mappings have been | |
| 6931 | initialized. Please find attached a patch that implements that | |
| 6932 | change. | |
| 6933 | ||
| 6934 | Also correct the decoding of the keypad status. With this update, the | |
| 6935 | key that will trigger the update is Column 2, Row 2. | |
| 6936 | ||
| f11033e7 WD |
6937 | commit d9384de2f571046e71081bae22b49e3d5ca2e3d5 |
| 6938 | Author: Marian Balakowicz <m8@semihalf.com> | |
| 6939 | Date: Wed Jan 10 00:26:15 2007 +0100 | |
| 6940 | ||
| 6941 | CAM5200 flash driver modifications: | |
| 6942 | - use CFI driver (replaces custom flash driver) for main 'cam5200' target | |
| 6943 | - add second build target 'cam5200_niosflash' which still uses custom driver | |
| 6944 | ||
| bab5a90d WD |
6945 | commit 67fea022fa957f59653b5238c7496f80a6b70432 |
| 6946 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 6947 | Date: Tue Jan 9 16:02:48 2007 +0100 | |
| 6948 | ||
| 6949 | SPC1920: cleanup memory contoller setup | |
| 6950 | ||
| 6951 | commit 8fc2102faa23593c80381437c09f7745a14deb40 | |
| 6952 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 6953 | Date: Tue Jan 9 14:57:14 2007 +0100 | |
| 6954 | ||
| 6955 | Fix the cpu speed setup to work with all boards. | |
| 6956 | ||
| 6957 | commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c | |
| 6958 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 6959 | Date: Tue Jan 9 14:57:13 2007 +0100 | |
| 6960 | ||
| 6961 | SPC1920: add support for the FM18L08 Ramtron FRAM | |
| 6962 | ||
| 6963 | commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 | |
| 6964 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 6965 | Date: Tue Jan 9 14:57:13 2007 +0100 | |
| 6966 | ||
| 6967 | SPC1920: update the HPI register addresses to work with the second | |
| 6968 | generation of hardware | |
| 6969 | ||
| 6970 | commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e | |
| 6971 | Author: Markus Klotzbuecher <mk@creamnet.de> | |
| 6972 | Date: Tue Jan 9 14:57:13 2007 +0100 | |
| 6973 | ||
| 6974 | Miscellanious spc1920 related cleanups | |
| 6975 | ||
| 6976 | commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 | |
| 6977 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 6978 | Date: Tue Jan 9 14:57:12 2007 +0100 | |
| 6979 | ||
| 6980 | SPC1920 GO/NOGO led should be set to color red in U-Boot | |
| 6981 | ||
| 6982 | commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 | |
| 6983 | Author: Markus Klotzbuecher <mk@creamnet.de> | |
| 6984 | Date: Tue Jan 9 14:57:12 2007 +0100 | |
| 6985 | ||
| 6986 | Add support for the DS3231 RTC | |
| 6987 | ||
| 6988 | commit 8139567b60d678584b05f0718a681f2047c5e14f | |
| 6989 | Author: Markus Klotzbuecher <mk@creamnet.de> | |
| 6990 | Date: Tue Jan 9 14:57:11 2007 +0100 | |
| 6991 | ||
| 6992 | SMC1 uses external CLK4 instead of BRG on spc1920 | |
| 6993 | ||
| 6994 | commit d8d9de1a02fbd880b613d607143d1f57342affc7 | |
| 6995 | Author: Markus Klotzbuecher <mk@creamnet.de> | |
| 6996 | Date: Tue Jan 9 14:57:10 2007 +0100 | |
| 6997 | ||
| 6998 | Update the SPC1920 CMB PLD driver | |
| 6999 | ||
| 7000 | commit 3f34f869162750e5e999fd140f884f5de952bcfe | |
| 7001 | Author: Markus Klotzbuecher <mk@creamnet.de> | |
| 7002 | Date: Tue Jan 9 14:57:10 2007 +0100 | |
| 7003 | ||
| 7004 | Add / enable I2C support on the spc1920 board | |
| 7005 | ||
| 7006 | commit d28707dbce1e9ac2017ad051da4133bf22b4204f | |
| 7007 | Author: Markus Klotzbuecher <mk@creamnet.de> | |
| 7008 | Date: Tue Jan 9 14:57:10 2007 +0100 | |
| 7009 | ||
| 7010 | Add support for the tms320671x host port interface (HPI) | |
| 7011 | ||
| 7012 | commit f4eb54529bb3664c3a562e488b460fe075f79d67 | |
| 7013 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7014 | Date: Sun Jan 7 00:13:11 2007 +0100 | |
| 7015 | ||
| 7016 | Prepare for release 1.2.0 | |
| 7017 | ||
| f4eb5452 WD |
7018 | commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 |
| 7019 | Author: Stefan Roese <sr@denx.de> | |
| 7020 | Date: Sat Jan 6 15:58:09 2007 +0100 | |
| 7021 | ||
| 7022 | [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) | |
| 7023 | ||
| 7024 | This patch fixes a problem with an incorrect setup for the refresh | |
| 7025 | timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c | |
| 7026 | ||
| 7027 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7028 | ||
| 7029 | commit f16c1da9577f06c5fc08651a4065537407de4635 | |
| 7030 | Author: Stefan Roese <sr@denx.de> | |
| 7031 | Date: Sat Jan 6 15:56:13 2007 +0100 | |
| 7032 | ||
| 7033 | [PATCH] Update ALPR board files | |
| 7034 | ||
| 7035 | This update brings the ALPR board support to the newest version. | |
| 7036 | It also fixes a problem with the NAND driver. | |
| 7037 | ||
| 7038 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7039 | ||
| 7040 | commit cd1d937f90250a32988c37b2b4af8364d25de8ed | |
| 7041 | Author: Stefan Roese <sr@denx.de> | |
| 7042 | Date: Fri Jan 5 11:46:05 2007 +0100 | |
| 7043 | ||
| 7044 | [PATCH] nand: Fix problem with oobsize calculation | |
| 7045 | ||
| 7046 | Here the description from Brian Brelsford <Brian_Brelsford@dell.com>: | |
| 7047 | ||
| 7048 | The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part | |
| 7049 | returns a 0x15. In the code fragment below bits [1:0] determine the | |
| 7050 | page size, it is ANDed via "(extid & 0x3)" then shifted out. The | |
| 7051 | next field is also ANDed with 0x3. However this is a one bit field | |
| 7052 | as defined in the Hynix and Samsung parts in the 4th ID byte that | |
| 7053 | determins the oobsize, not a two bit field. It works on Samsung as | |
| 7054 | bits[3:2] are 01. However for the Hynix there is a 11 in these two | |
| 7055 | bits, so the oob size gets messed up. | |
| 7056 | ||
| 7057 | I checked the correct linux code and the suggested fix from Brian is | |
| 7058 | also available in the linux nand mtd driver. | |
| 7059 | ||
| 7060 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7061 | ||
| 7062 | commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e | |
| 7063 | Author: Stefan Roese <sr@denx.de> | |
| 7064 | Date: Fri Jan 5 10:40:36 2007 +0100 | |
| 7065 | ||
| 7066 | [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) | |
| 7067 | ||
| 7068 | This fix will make the MAL burst disabling patch for the Linux | |
| 7069 | EMAC driver obsolete. | |
| 7070 | ||
| 7071 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7072 | ||
| 7073 | commit 023889838282b6237b401664f22dd22dfba2c066 | |
| 7074 | Author: Stefan Roese <sr@denx.de> | |
| 7075 | Date: Fri Jan 5 10:38:05 2007 +0100 | |
| 7076 | ||
| 7077 | [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board | |
| 7078 | ||
| 7079 | This code will optimize the DDR2 controller setup on a board specific | |
| 7080 | basis. | |
| 7081 | ||
| 7082 | Note: This code doesn't work right now on the NAND booting image for the | |
| 7083 | Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. | |
| 7084 | ||
| 7085 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7086 | ||
| 7087 | commit cce4acbb68398634b8d011ed7bb0d12269c84230 | |
| 7088 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 7089 | Date: Thu Dec 28 19:08:21 2006 +0100 | |
| 7090 | ||
| 7091 | Few V38B changes: | |
| 7092 | - fix a typo in V38B config file | |
| 7093 | - move watchdog initialisation earlier in the boot process | |
| 7094 | - add "wdt=off" to default kernel command line (disables kernel watchdog) | |
| 7095 | ||
| 7096 | commit 92eb729bad876725aeea908d2addba0800620840 | |
| 7097 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7098 | Date: Wed Dec 27 01:26:13 2006 +0100 | |
| 7099 | ||
| 7100 | Fix bug in adaption of Stefano Babic's CFI driver patch. | |
| 7101 | ||
| 7102 | commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 | |
| 7103 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7104 | Date: Sun Dec 24 01:42:57 2006 +0100 | |
| 7105 | ||
| 7106 | Minor code cleanup. | |
| 7107 | ||
| 7108 | commit d784fdb05900ada3686d5778783e1fb328e9fb66 | |
| 7109 | Author: Stefano Babic <sbabic@denx.de> | |
| 7110 | Date: Tue Dec 12 00:22:42 2006 +0100 | |
| 7111 | ||
| 7112 | Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) | |
| 7113 | ||
| 7114 | commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 | |
| 7115 | Author: Stefan Roese <sr@denx.de> | |
| 7116 | Date: Fri Dec 22 14:29:40 2006 +0100 | |
| 7117 | ||
| 7118 | [PATCH] Fix sequoia flash autodetection (finally correct) | |
| 7119 | ||
| 7120 | Now 32MByte and 64MByte FLASH is know to work and other | |
| 7121 | configurations should work too. | |
| 7122 | ||
| 7123 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7124 | ||
| 7125 | commit 82e5236a8b719543643fd26d5827938ab2b94818 | |
| 7126 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7127 | Date: Fri Dec 22 10:30:26 2006 +0100 | |
| 7128 | ||
| 7129 | Minor code cleanup; update CHANGELOG. | |
| 7130 | ||
| 7131 | commit fa23044564091f05d9695beb7b5b9a931e7f41a4 | |
| 7132 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 7133 | Date: Thu Dec 21 17:17:02 2006 +0100 | |
| 7134 | ||
| 7135 | Added support for the TQM8272 board from TQ | |
| 7136 | ||
| 7137 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 7138 | ||
| f11033e7 WD |
7139 | commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c |
| 7140 | Author: Heiko Schocher <hs@pollux.denx.de> | |
| 7141 | Date: Thu Dec 21 16:14:48 2006 +0100 | |
| 7142 | ||
| 7143 | [PATCH] Add support for the UC101 board from MAN. | |
| 7144 | ||
| 7145 | Signed-off-by: Heiko Schocher <hs@denx.de> | |
| 7146 | ||
| 82e5236a WD |
7147 | commit c84bad0ef60e7055ab0bd49b93069509cecc382a |
| 7148 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 7149 | Date: Wed Dec 20 00:29:43 2006 +0100 | |
| 7150 | ||
| 7151 | Fix to make the baudrate changes immediate for the MCF52x2 family. | |
| 7152 | ||
| 7153 | commit daa6e418bcc0c717752e8de939c213c790286096 | |
| 7154 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 7155 | Date: Wed Dec 20 00:27:32 2006 +0100 | |
| 7156 | ||
| 7157 | Preliminary support for the iDMR board (ColdFire). | |
| 7158 | ||
| 7159 | commit cdb97a6678826f85e7c69eae6a1c113d034c9b10 | |
| 7160 | Author: Andrei Safronov <safronov@pollux.denx.de> | |
| 7161 | Date: Fri Dec 8 16:23:08 2006 +0100 | |
| 7162 | ||
| 7163 | automatic update mechanism | |
| 7164 | ||
| 2a26ec47 WD |
7165 | commit 9d27b3a0685ff99fc477983f315c04d49f657a8a |
| 7166 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 7167 | Date: Mon Dec 4 17:56:59 2006 +0800 | |
| 7168 | ||
| 7169 | Slight code clean up. | |
| 7170 | Add comments, delete duplicate define and remove spaces. | |
| 7171 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 7172 | ||
| 7173 | commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1 | |
| 7174 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 7175 | Date: Mon Dec 4 17:54:21 2006 +0800 | |
| 7176 | ||
| 7177 | Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original | |
| 7178 | multiplier table can not refect the real PLL clock behavior of these | |
| 7179 | processors. Please refer to the hardware specification for detailed | |
| 7180 | information of the corresponding processors. | |
| 7181 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 7182 | ||
| 7183 | commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0 | |
| 7184 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 7185 | Date: Mon Dec 4 14:46:23 2006 +0800 | |
| 7186 | ||
| 7187 | Remove the static MAC address, ip address, server ip, netmask and | |
| 7188 | gateway ip for network setting. | |
| 7189 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 7190 | ||
| 7191 | commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf | |
| 7192 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 7193 | Date: Mon Dec 4 14:33:08 2006 +0800 | |
| 7194 | ||
| 7195 | Remove the duplicate memory test code for mpc744ihpc2 board. | |
| 7196 | If a memory test is needed, please use the functions in | |
| 7197 | post/memory.c or memtest command. | |
| 7198 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 7199 | ||
| 7200 | commit c9c1eeed7dd193fa65fb194654132040d49d4d3a | |
| 7201 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 7202 | Date: Fri Dec 1 19:01:25 2006 +0800 | |
| 7203 | ||
| 7204 | Fix the exception occuring in RAM table search issue. | |
| 7205 | The original search_one_table() function code can only processes the search | |
| 7206 | for the exception occurring in FLASH/ROM, because the exception and fixup | |
| 7207 | table usually locate in FLASH. If the exception address is also in | |
| 7208 | FLASH, it will be OK. | |
| 7209 | If the exception occurs in RAM, after the u-boot relocation, a | |
| 7210 | relocation offset should be added. | |
| 7211 | ||
| 7212 | clean up the code in cpu/74xx_7xx/cpu.c | |
| 7213 | ||
| 7214 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 7215 | ||
| 7216 | commit ee311214e0d216f904feea269599d0934bf71f23 | |
| 7217 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 7218 | Date: Fri Dec 1 11:47:36 2006 +0800 | |
| 7219 | ||
| 7220 | Clean up the code according to codestyle: | |
| 7221 | (1) remove some C++ comments. | |
| 7222 | (2) remove trailing white space. | |
| 7223 | (3) remove trailing empty line. | |
| 7224 | (4) Indentation by table. | |
| 7225 | (5) remove {} in one line condition. | |
| 7226 | (6) add space before '(' in function call. | |
| 7227 | Remove some weird printf () output. | |
| 7228 | Add necessary comments. | |
| 7229 | Modified Makefile to support building in a separate directory. | |
| 7230 | ||
| 82e5236a WD |
7231 | commit dd520bf314c7add4183c5191692180f576f96b60 |
| 7232 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7233 | Date: Thu Nov 30 18:02:20 2006 +0100 | |
| 7234 | ||
| 7235 | Code cleanup. | |
| 7236 | ||
| dd520bf3 WD |
7237 | commit 8d9a8610b8256331132227e9e6585c6bd5742787 |
| 7238 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7239 | Date: Thu Nov 30 01:54:07 2006 +0100 | |
| 7240 | ||
| 7241 | Code cleanup. Update CHANGELOG. | |
| 7242 | ||
| 8d9a8610 WD |
7243 | commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba |
| 7244 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 7245 | Date: Wed Nov 29 16:23:42 2006 +0100 | |
| 7246 | ||
| 7247 | [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals | |
| 7248 | ||
| 7249 | The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, | |
| 7250 | not the XLB frequency. | |
| 7251 | ||
| 7252 | This patch depends on the previous patches for MPC52xx device tree support | |
| 7253 | ||
| 7254 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 7255 | Signed-off-by: Sylvain Munaut <tnt@246tNt.com> | |
| 7256 | ||
| 7257 | commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6 | |
| 7258 | Author: Stefan Roese <sr@denx.de> | |
| 7259 | Date: Wed Nov 29 15:42:37 2006 +0100 | |
| 7260 | ||
| 7261 | [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards | |
| 7262 | ||
| 7263 | This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) | |
| 7264 | and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are | |
| 7265 | quite similar and share the same board directory "prodrive/p3mx" | |
| 7266 | and the same config file "p3mx.h". | |
| 7267 | ||
| 7268 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7269 | ||
| 7270 | commit 1bdd46832aeb569f5e04b1f20f64318525b6525a | |
| 7271 | Author: Stefan Roese <sr@denx.de> | |
| 7272 | Date: Wed Nov 29 12:53:15 2006 +0100 | |
| 7273 | ||
| 7274 | [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command | |
| 7275 | ||
| 7276 | In the bootvx command the load address was only read from the env | |
| 7277 | variable "loadaddr" and not optionally passed as paramter as described | |
| 7278 | in the help. This is fixed with this patch. The behaviour is now the | |
| 7279 | same as in the bootelf command. | |
| 7280 | ||
| 7281 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7282 | ||
| 7283 | commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 | |
| 7284 | Author: Stefan Roese <sr@denx.de> | |
| 7285 | Date: Wed Nov 29 12:03:57 2006 +0100 | |
| 7286 | ||
| 7287 | [PATCH] include/ppc440.h minor error affecting interrupts | |
| 7288 | ||
| 7289 | Fixed include/ppc440.c for UIC address Bug | |
| 7290 | ||
| 7291 | Corrects bug affecting the addresses for the universal interrupt | |
| 7292 | controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. | |
| 7293 | ||
| 7294 | Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> | |
| 7295 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7296 | ||
| dd520bf3 WD |
7297 | commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a |
| 7298 | Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
| 7299 | Date: Tue Nov 28 16:17:27 2006 -0600 | |
| 7300 | ||
| 7301 | Make fsl-i2c not conflict with SOFT I2C | |
| 7302 | ||
| 7303 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7304 | ||
| 7305 | commit 14198bf768fdc958e3c1afd2404e5262208e98d7 | |
| 7306 | Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> | |
| 7307 | Date: Tue Nov 28 16:17:18 2006 -0600 | |
| 7308 | ||
| 7309 | Fix I2C master address initialization. | |
| 7310 | ||
| 7311 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7312 | ||
| 7313 | commit cf3d045e51ca8dcc6cf759827140861d6ac25c04 | |
| 7314 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 7315 | Date: Tue Nov 28 23:31:19 2006 -0600 | |
| 7316 | ||
| 7317 | Assign maintainers for mpc8349emds and mpc8360emds | |
| 7318 | ||
| 7319 | Dave for mpc8360emds, and me for mpc8349emds. | |
| 7320 | ||
| 7321 | commit 1aa934c81b77f2080d3ca4b226eab67b17a33961 | |
| 7322 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 7323 | Date: Tue Nov 28 23:28:33 2006 -0600 | |
| 7324 | ||
| 7325 | Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c | |
| 7326 | ||
| 7327 | give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src | |
| 7328 | since they are passed by reference to ucc_get_cmxucr_reg and assigned. | |
| 7329 | ||
| 7330 | commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 | |
| 7331 | Author: Timur Tabi <timur@freescale.com> | |
| 7332 | Date: Tue Nov 28 12:09:35 2006 -0600 | |
| 7333 | ||
| 7334 | mpc83xx: Miscellaneous code style fixes | |
| 7335 | ||
| 7336 | Implement various code style fixes and similar changes. | |
| 7337 | ||
| 7338 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7339 | ||
| 8d9a8610 WD |
7340 | commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 |
| 7341 | Author: Stefan Roese <sr@denx.de> | |
| 7342 | Date: Tue Nov 28 17:55:49 2006 +0100 | |
| 7343 | ||
| 7344 | [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. | |
| 7345 | ||
| 7346 | This patch adds the code and configuration necessary to boot with an | |
| 7347 | arch/powerpc Linux kernel. | |
| 7348 | ||
| 7349 | Signed-off-by: Grant Likely <grant.likely@gmail.com> | |
| 7350 | Acked-by: Jon Loeliger <jdl@freescale.com> | |
| 7351 | ||
| 7352 | commit e732faec95a83cb468b4850ae807c8301dde8f6a | |
| 7353 | Author: Stefan Roese <sr@denx.de> | |
| 7354 | Date: Tue Nov 28 16:09:24 2006 +0100 | |
| 7355 | ||
| 7356 | [PATCH] PPC4xx: 440SP Rev. C detection added | |
| 7357 | ||
| 7358 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7359 | ||
| 7360 | commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 | |
| 7361 | Author: Stefan Roese <sr@denx.de> | |
| 7362 | Date: Tue Nov 28 11:04:45 2006 +0100 | |
| 7363 | ||
| 7364 | [PATCH] nand: Fix patch merge problem | |
| 7365 | ||
| 7366 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7367 | ||
| 2a8dfe08 WD |
7368 | commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2 |
| 7369 | Author: Stefan Roese <sr@denx.de> | |
| 7370 | Date: Tue Nov 28 11:04:45 2006 +0100 | |
| 7371 | ||
| 7372 | [PATCH] nand: Fix patch merge problem | |
| 7373 | ||
| 7374 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7375 | ||
| d2c83f54 WD |
7376 | commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa |
| 7377 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7378 | Date: Mon Nov 27 22:53:53 2006 +0100 | |
| 7379 | ||
| 7380 | Update CHANGELOG | |
| 7381 | ||
| 4f4b602e WD |
7382 | commit f6e495f54cdb8fe340b9c03deab40ad746d52fae |
| 7383 | Author: Stefan Roese <sr@denx.de> | |
| 7384 | Date: Mon Nov 27 17:43:25 2006 +0100 | |
| 7385 | ||
| 7386 | [PATCH] 4xx_enet.c: Correct the setting of zmiifer register | |
| 7387 | ||
| 7388 | Patch below corrects the setting of the zmiifer register, it was | |
| 7389 | overwritting the register rather than ORing the settings. | |
| 7390 | ||
| 7391 | Signed-off-by: Neil Wilson <NWilson@airspan.com> | |
| 7392 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7393 | ||
| 7394 | commit d1a72545296800b7e219f93104ad5836f0003d66 | |
| 7395 | Author: Stefan Roese <sr@denx.de> | |
| 7396 | Date: Mon Nov 27 17:34:10 2006 +0100 | |
| 7397 | ||
| 7398 | [PATCH] Select NAND embedded environment from board configuration | |
| 7399 | ||
| 7400 | The current NAND Bootloader setup forces the environment | |
| 7401 | variables to be in line with the bootloader. This change | |
| 7402 | enables the configuration to be made in the board include | |
| 7403 | file instead so that it can be individually enabled. | |
| 7404 | ||
| 7405 | Signed-off-by: Nick Spence <nick.spence@freescale.com> | |
| 7406 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7407 | ||
| 7408 | commit 15784862857c3c2214498defcfed84ff137fb81e | |
| 7409 | Author: Stefan Roese <sr@denx.de> | |
| 7410 | Date: Mon Nov 27 17:22:19 2006 +0100 | |
| 7411 | ||
| 7412 | [PATCH] nand_wait() timeout fixes | |
| 7413 | ||
| 7414 | Two fixes for the nand_wait() function in | |
| 7415 | drivers/nand/nand_base.c: | |
| 7416 | ||
| 7417 | 1. Use correct timeouts. The original timeouts in Linux | |
| 7418 | source are 400ms and 20ms not 40s and 20s | |
| 7419 | ||
| 7420 | 2. Return correct error value in case of timeout. 0 is | |
| 7421 | interpreted as OK. | |
| 7422 | ||
| 7423 | Signed-off-by: Rui Sousa <rui.sousa@laposte.net> | |
| 7424 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7425 | ||
| 7426 | commit da5553b095bf04f4f109ad7e565dae3aba47b230 | |
| 7427 | Author: Stefan Roese <sr@denx.de> | |
| 7428 | Date: Mon Nov 27 17:04:06 2006 +0100 | |
| 7429 | ||
| 7430 | [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel | |
| 7431 | ||
| 7432 | This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 | |
| f4eb5452 | 7433 | arguments to bootm. It removes the getenv("disable_of") test that used |
| 4f4b602e WD |
7434 | to be used for this purpose. |
| 7435 | ||
| 7436 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | |
| 7437 | Acked-by: Jon Loeliger <jdl@freescale.com> | |
| 7438 | ||
| 7439 | commit a9398e018593782c5fa7d0741955fc1256b34c1e | |
| 7440 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7441 | Date: Mon Nov 27 15:32:42 2006 +0100 | |
| 7442 | ||
| 7443 | Minor code cleanup. Update CHANGELOG. | |
| 7444 | ||
| 8d9a8610 WD |
7445 | commit 1729b92cde575476684bffe819d0b7791b57bff2 |
| 7446 | Author: Stefan Roese <sr@denx.de> | |
| 7447 | Date: Mon Nov 27 14:52:04 2006 +0100 | |
| 7448 | ||
| 7449 | [PATCH] 4xx: Fix problem with board specific reset code (now for real) | |
| 7450 | ||
| 7451 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7452 | ||
| 7453 | commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 | |
| 7454 | Author: Stefan Roese <sr@denx.de> | |
| 7455 | Date: Mon Nov 27 14:49:51 2006 +0100 | |
| 7456 | ||
| 7457 | [PATCH] alpr: remove unused board specific flash driver | |
| 7458 | ||
| 7459 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7460 | ||
| 7461 | commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1 | |
| 7462 | Author: Stefan Roese <sr@denx.de> | |
| 7463 | Date: Mon Nov 27 14:48:41 2006 +0100 | |
| 7464 | ||
| 7465 | [PATCH] 4xx: Fix problem with board specific reset code | |
| 7466 | ||
| 7467 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7468 | ||
| 7469 | commit ec0c2ec725aec9524a177a77ce75559e644a931a | |
| 7470 | Author: Stefan Roese <sr@denx.de> | |
| 7471 | Date: Mon Nov 27 14:46:06 2006 +0100 | |
| 7472 | ||
| 7473 | [PATCH] Remove testing 4xx enet PHY setup | |
| 7474 | ||
| 7475 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7476 | ||
| 7477 | commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 | |
| 7478 | Author: Stefan Roese <sr@denx.de> | |
| 7479 | Date: Mon Nov 27 14:12:17 2006 +0100 | |
| 7480 | ||
| 7481 | [PATCH] Update Prodrive ALPR board support (440GX) | |
| 7482 | ||
| 7483 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7484 | ||
| 9986bc3e WD |
7485 | commit 58b485776698c3d71ec5a215e392123b4c15afa3 |
| 7486 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 7487 | Date: Mon Nov 27 11:51:21 2006 +0100 | |
| 7488 | ||
| 7489 | Add a small README with information on the generic ohci driver. | |
| 7490 | ||
| 7491 | commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f | |
| 7492 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 7493 | Date: Mon Nov 27 11:46:46 2006 +0100 | |
| 7494 | ||
| 7495 | Fix some endianness issues related to the generic ohci driver | |
| 7496 | ||
| 7497 | commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418 | |
| 7498 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 7499 | Date: Mon Nov 27 11:44:58 2006 +0100 | |
| 7500 | ||
| 7501 | Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able | |
| 7502 | to choose between the old and the generic OHCI drivers. | |
| 7503 | ||
| 7504 | commit 53e336e9ffc51035bdc4e5867631b3378761b4df | |
| 7505 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 7506 | Date: Mon Nov 27 11:43:09 2006 +0100 | |
| 7507 | ||
| 7508 | Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver | |
| 7509 | and adapted board configs TQM5200 and yosemite accordingly. This commit | |
| 7510 | also makes the maximum number of root hub ports configurable | |
| 7511 | (CFG_USB_OHCI_MAX_ROOT_PORTS). | |
| 7512 | ||
| a9398e01 WD |
7513 | commit 78d620ebb5871d252270dedfad60c6568993b780 |
| 7514 | Author: Wolfgang Denk <wd@atlas.denx.de> | |
| 7515 | Date: Thu Nov 23 22:58:58 2006 +0100 | |
| 7516 | ||
| 7517 | Updates for TQM5200 modules: | |
| 7518 | - fix off-by-one error in board/tqm5200/cam5200_flash.c error message | |
| 7519 | - simplify "udate" definitions | |
| 7520 | ||
| 7521 | commit 2053283304eeddf250d109e6791eb6fa4cad14f7 | |
| 7522 | Author: Stefan Roese <sr@denx.de> | |
| 7523 | Date: Wed Nov 22 13:20:50 2006 +0100 | |
| 7524 | ||
| 7525 | [PATCH] PPC4xx start.S: Fix for processor errata | |
| 7526 | ||
| 7527 | Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx | |
| 7528 | errata 1.12: 440_33 by moving patch up in code. | |
| 7529 | ||
| 7530 | Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> | |
| 7531 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7532 | ||
| 7533 | commit 4ef6251403f637841000e0fef9e832aa01339822 | |
| 7534 | Author: Stefan Roese <sr@denx.de> | |
| 7535 | Date: Mon Nov 20 20:39:52 2006 +0100 | |
| 7536 | ||
| 7537 | [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH | |
| 7538 | ||
| 7539 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7540 | ||
| 7541 | commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0 | |
| 7542 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7543 | Date: Mon Nov 20 10:28:30 2006 +0100 | |
| 7544 | ||
| 7545 | Update CHANGELOG | |
| 7546 | ||
| e4bbd8da WD |
7547 | commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 |
| 7548 | Author: Stefan Roese <sr@denx.de> | |
| 7549 | Date: Mon Nov 13 13:55:24 2006 +0100 | |
| 7550 | ||
| 7551 | [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated] | |
| 7552 | ||
| 7553 | * Adds support for AMD command set Top Boot flash geometry reversal | |
| 7554 | * Adds support for reading JEDEC Manufacturer ID and Device ID | |
| 7555 | * Adds support for displaying command set, manufacturer id and | |
| 7556 | device ids (flinfo) | |
| 7557 | * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined | |
| 7558 | * Removes outdated change history (refer to git log instead) | |
| 7559 | ||
| 7560 | Signed-off-by: Tolunay Orkun <listmember@orkun.us> | |
| 7561 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 7562 | ||
| 7563 | commit b21b511d4c50408f4853f46f06b601272196223f | |
| 7564 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7565 | Date: Sun Nov 12 21:13:23 2006 +0100 | |
| 7566 | ||
| 7567 | Update CHANGELOG | |
| 7568 | ||
| b21b511d WD |
7569 | commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245 |
| 7570 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 7571 | Date: Sat Nov 11 22:48:22 2006 +0100 | |
| 7572 | ||
| 7573 | Disable the watchdog in the default config for the V38B board. | |
| 7574 | ||
| 7575 | commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a | |
| 7576 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 7577 | Date: Sat Nov 11 22:43:00 2006 +0100 | |
| 7578 | ||
| 7579 | Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin | |
| 7580 | group is enabled for USB earlier (in cpu_init_f() instead of | |
| 7581 | usb_lowlevel_init()). | |
| 7582 | ||
| 7583 | commit 91650b3e4de688038d4f71279c44858e3e2c6870 | |
| 7584 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7585 | Date: Mon Nov 6 17:06:36 2006 +0100 | |
| 7586 | ||
| 7587 | Sequential accesses to non-existent memory must be synchronized, | |
| 7588 | at least on G2 cores. | |
| 7589 | ||
| 7590 | This fixes get_ram_size() problems on MPC5200 Rev. B boards. | |
| 7591 | ||
| dd520bf3 WD |
7592 | commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa |
| 7593 | Author: Timur Tabi <timur@freescale.com> | |
| 7594 | Date: Fri Nov 3 19:15:00 2006 -0600 | |
| 7595 | ||
| 7596 | mpc83xx: Update 83xx to use fsl_i2c.c | |
| 7597 | ||
| 7598 | Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete | |
| 7599 | cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. | |
| 7600 | Added multiple I2C bus support to fsl_i2c.c. | |
| 7601 | ||
| 7602 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7603 | ||
| 7604 | commit d239d74b1c937984bc519083a8e7de373a390f06 | |
| 7605 | Author: Timur Tabi <timur@freescale.com> | |
| 7606 | Date: Fri Nov 3 12:00:28 2006 -0600 | |
| 7607 | ||
| 7608 | mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR | |
| 7609 | ||
| 7610 | Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx | |
| 7611 | tree matches the other 8xxx trees. | |
| 7612 | ||
| 7613 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7614 | ||
| 7615 | commit f7fb2e703ec9688541416962724adff70a7322cb | |
| 7616 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 7617 | Date: Thu Nov 2 19:47:11 2006 -0600 | |
| 7618 | ||
| 7619 | mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c | |
| 7620 | ||
| 7621 | commit 90f30a710a3c619b5405860a686c4ddfc495d4b6 | |
| 7622 | Author: Dave Liu <daveliu@freescale.com> | |
| 7623 | Date: Thu Nov 2 18:05:50 2006 -0600 | |
| 7624 | ||
| 7625 | mpc83xx: Fix the incorrect dcbz operation | |
| 7626 | ||
| 7627 | The 834x rev1.x silicon has one CPU5 errata. | |
| 7628 | ||
| 7629 | The issue is when the data cache locked with | |
| 7630 | HID0[DLOCK], the dcbz instruction looks like no-op inst. | |
| 7631 | ||
| 7632 | The right behavior of the data cache is when the data cache | |
| 7633 | Locked with HID0[DLOCK], the dcbz instruction allocates | |
| 7634 | new tags in cache. | |
| 7635 | ||
| 7636 | The 834x rev3.0 and later and 8360 have not this bug inside. | |
| 7637 | ||
| 7638 | So, when 834x rev3.0/8360 are working with ECC, the dcbz | |
| 7639 | instruction will corrupt the stack in cache, the processor will | |
| 7640 | checkstop reset. | |
| 7641 | ||
| 7642 | However, the 834x rev1.x can work with ECC with these code, | |
| 7643 | because the sillicon has this cache bug. The dcbz will not | |
| 7644 | corrupt the stack in cache. | |
| 7645 | Really, it is the fault code running on fault sillicon. | |
| 7646 | ||
| 7647 | This patch fix the incorrect dcbz operation. Instead of | |
| 7648 | CPU FP writing to initialise the ECC. | |
| 7649 | ||
| 7650 | CHANGELOG: | |
| 7651 | * Fix the incorrect dcbz operation instead of CPU FP | |
| 7652 | writing to initialise the ECC memory. Otherwise, it | |
| 7653 | will corrupt the stack in cache, The processor will checkstop | |
| 7654 | reset. | |
| 7655 | ||
| 7656 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 7657 | ||
| 7658 | commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d | |
| 7659 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 7660 | Date: Wed Nov 1 00:10:40 2006 -0600 | |
| 7661 | ||
| 7662 | mpc83xx: add OF_FLAT_TREE bits to 83xx boards | |
| 7663 | ||
| 7664 | add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and | |
| 7665 | STDOUT_PATH configuration bits to mpc8349emds, | |
| 7666 | mpc8349itx, and mpc8360emds board code. | |
| 7667 | ||
| 7668 | redo environment to use bootm with the fdtaddr | |
| 7669 | for booting ARCH=powerpc kernels by default, | |
| 7670 | and provide default fdtaddr values. | |
| 7671 | ||
| 7672 | commit 48041365b3420589ad464ebc7752e0053538b729 | |
| 7673 | Author: Kim Phillips <kim.phillips@freescale.com> | |
| 7674 | Date: Wed Nov 1 00:07:25 2006 -0600 | |
| 7675 | ||
| 7676 | mpc83xx: change ft code to modify local-mac-address property | |
| 7677 | ||
| 7678 | Update 83xx OF code to update local-mac-address properties | |
| 7679 | for ethernet instead of the obsolete 'address' property. | |
| 7680 | ||
| 7681 | commit 9ca880a250870a7d55754291b5591d2b5fe89b54 | |
| 7682 | Author: Timur Tabi <timur@freescale.com> | |
| 7683 | Date: Tue Oct 31 21:23:16 2006 -0600 | |
| 7684 | ||
| 7685 | mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS | |
| 7686 | ||
| 7687 | This patch also adds an improved I2C set_speed(), which handles all clock | |
| 7688 | frequencies. | |
| 7689 | ||
| 7690 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7691 | ||
| 7692 | commit ac4b5622ce050b5ee1e154b98df630d778661632 | |
| 7693 | Author: Dave Liu <daveliu@freescale.com> | |
| 7694 | Date: Tue Oct 31 19:54:59 2006 -0600 | |
| 7695 | ||
| 7696 | mpc83xx: add the README.mpc8360emds | |
| 7697 | ||
| 7698 | add doc/README.mpc8360emds to accompany the new board support | |
| 7699 | ||
| 7700 | commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef | |
| 7701 | Author: Dave Liu <daveliu@freescale.com> | |
| 7702 | Date: Fri Nov 3 12:11:15 2006 -0600 | |
| 7703 | ||
| 7704 | mpc83xx: add QE ethernet support | |
| 7705 | ||
| 7706 | this patch adds support for the QUICC Engine based UCC gigabit ethernet device. | |
| 7707 | ||
| 7708 | commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 | |
| 7709 | Author: Dave Liu <daveliu@freescale.com> | |
| 7710 | Date: Fri Nov 3 19:33:44 2006 -0600 | |
| 7711 | ||
| 7712 | mpc83xx: Add MPC8360EMDS basic board support | |
| 7713 | ||
| 7714 | Add support for the Freescale MPC8360EMDS board. | |
| 7715 | Includes DDR, DUART, Local Bus, PCI. | |
| 7716 | ||
| 7717 | commit 23892e49352de74f7fac36ff90bb1be143d195e3 | |
| 7718 | Author: Dave Liu <daveliu@freescale.com> | |
| 7719 | Date: Tue Oct 31 19:30:40 2006 -0600 | |
| 7720 | ||
| 7721 | mpc83xx: add the QUICC Engine (QE) immap file | |
| 7722 | ||
| 7723 | common QE immap file. Also required for 8360. | |
| 7724 | ||
| 7725 | commit b701652a4992bdcc62fb1a6038a85beef9e55da4 | |
| 7726 | Author: Dave Liu <daveliu@freescale.com> | |
| 7727 | Date: Tue Oct 31 19:25:38 2006 -0600 | |
| 7728 | ||
| 7729 | mpc83xx: Add 8360 specifics to 83xx immap | |
| 7730 | ||
| 7731 | Mainly add QE device dependencies, with appropriate 8360 protection. | |
| 7732 | Lindent also run. | |
| 7733 | ||
| 7734 | commit 988833324a7fda482c8ac3ca23eb539f8232e404 | |
| 7735 | Author: Timur Tabi <timur@freescale.com> | |
| 7736 | Date: Tue Oct 31 19:14:41 2006 -0600 | |
| 7737 | ||
| 7738 | mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX | |
| 7739 | ||
| 7740 | PREREQUISITE PATCHES: | |
| 7741 | ||
| 7742 | * This patch can only be applied after the following patches have been applied: | |
| 7743 | ||
| 7744 | 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" | |
| 7745 | 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" | |
| 7746 | ||
| 7747 | CHANGELOG: | |
| 7748 | ||
| 7749 | * For the 8349E-mITX, fix some size values in pci_init_board(), enable | |
| 7750 | the clock for the 2nd USB board (Linux kernel will hang otherwise), | |
| 7751 | and fix the CONFIG_BOOTARGS macro. | |
| 7752 | ||
| 7753 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7754 | ||
| 7755 | commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357 | |
| 7756 | Author: Timur Tabi <timur@freescale.com> | |
| 7757 | Date: Tue Oct 31 18:44:42 2006 -0600 | |
| 7758 | ||
| 7759 | mpc83xx: Add support for the MPC8349E-mITX | |
| 7760 | ||
| 7761 | PREREQUISITE PATCHES: | |
| 7762 | ||
| 7763 | * This patch can only be applied after the following patches have been applied: | |
| 7764 | ||
| 7765 | 1) DNX#2006090742000024 "Add support for multiple I2C buses" | |
| 7766 | 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" | |
| 7767 | 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" | |
| 7768 | 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" | |
| 7769 | 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" | |
| 7770 | ||
| 7771 | CHANGELOG: | |
| 7772 | ||
| 7773 | * Add support for the Freescale MPC8349E-mITX reference design platform. | |
| 7774 | The second TSEC (Vitesse 7385 switch) is not supported at this time. | |
| 7775 | ||
| 7776 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7777 | ||
| 7778 | commit 183da6d9b446cc12123455844ad1187e2375626f | |
| 7779 | Author: Ben Warren <bwarren@qstreams.com> | |
| 7780 | Date: Tue Sep 12 10:15:53 2006 -0400 | |
| 7781 | ||
| 7782 | Additional MPC8349 support for multibus i2c | |
| 7783 | ||
| 7784 | Hello, | |
| 7785 | ||
| 7786 | Here is a patch for a file that was accidentally left out of a previous | |
| 7787 | attempt. | |
| 7788 | ||
| 7789 | It accompanies the patch with ticket DNX#2006090742000024 | |
| 7790 | ||
| 7791 | CHANGELOG: | |
| 7792 | Change PCI initialization to use new multi-bus I2C API. | |
| 7793 | ||
| 7794 | regards, | |
| 7795 | Ben | |
| 7796 | ||
| 7797 | commit b24f119d672b709d153ff2ac091d4aa63ec6877d | |
| 7798 | Author: Ben Warren <bwarren@qstreams.com> | |
| 7799 | Date: Thu Sep 7 16:51:04 2006 -0400 | |
| 7800 | ||
| 7801 | Multi-bus I2C implementation of MPC834x | |
| 7802 | ||
| 7803 | Hello, | |
| 7804 | ||
| 7805 | Attached is a patch implementing multiple I2C buses on the MPC834x CPU | |
| 7806 | family and the MPC8349EMDS board in particular. | |
| 7807 | This patch requires Patch 1 (Add support for multiple I2C buses). | |
| 7808 | Testing was performed on a 533MHz board. | |
| 7809 | ||
| 7810 | /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ | |
| 7811 | ||
| 7812 | Signed-off-by: Ben Warren <bwarren@qstreams.com> | |
| 7813 | ||
| 7814 | CHANGELOG: | |
| 7815 | Implemented driver-level code to support two I2C buses on the | |
| 7816 | MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds | |
| 7817 | are 50kHz, 100kHz and 400kHz on each bus. | |
| 7818 | ||
| 7819 | regards, | |
| 7820 | Ben | |
| 7821 | ||
| 7822 | commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae | |
| 7823 | Author: Ben Warren <bwarren@qstreams.com> | |
| 7824 | Date: Thu Sep 7 16:50:54 2006 -0400 | |
| 7825 | ||
| 7826 | Add support for multiple I2C buses | |
| 7827 | ||
| 7828 | Hello, | |
| 7829 | ||
| 7830 | Attached is a patch providing support for multiple I2C buses at the | |
| 7831 | command level. The second part of the patch includes an implementation | |
| 7832 | for the MPC834x CPU and MPC8349EMDS board. | |
| 7833 | ||
| 7834 | /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ | |
| 7835 | ||
| 7836 | Signed-off-by: Ben Warren <bwarren@qstreams.com> | |
| 7837 | ||
| 7838 | Overview: | |
| 7839 | ||
| 7840 | 1. Include new 'i2c' command (based on USB implementation) using | |
| 7841 | CONFIG_I2C_CMD_TREE. | |
| 7842 | ||
| 7843 | 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that | |
| 7844 | the commands to change bus number and speed are only available under the | |
| 7845 | new 'i2c' command mentioned in the first bullet. | |
| 7846 | ||
| 7847 | 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus | |
| 7848 | systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form | |
| 7849 | of an array of bus-device pairs. Otherwise, it is an array of uchar. | |
| 7850 | ||
| 7851 | CHANGELOG: | |
| 7852 | Added new 'i2c' master command for all I2C interaction. This is | |
| 7853 | conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for | |
| 7854 | setting I2C bus speed as well as changing the active bus if the board | |
| 7855 | has more than one (conditionally compiled with | |
| 7856 | CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. | |
| 7857 | Updated README. | |
| 7858 | ||
| 7859 | regards, | |
| 7860 | Ben | |
| 7861 | ||
| 7862 | commit bed85caf872714ebf53013967a695c9d63acfc68 | |
| 7863 | Author: Timur Tabi <timur@freescale.com> | |
| 7864 | Date: Tue Oct 31 18:13:36 2006 -0600 | |
| 7865 | ||
| 7866 | mpc83xx: Add support for Errata DDR6 on MPC 834x systems | |
| 7867 | ||
| 7868 | CHANGELOG: | |
| 7869 | ||
| 7870 | * Errata DDR6, which affects all current MPC 834x processors, lists changes | |
| 7871 | required to maintain compatibility with various types of DDR memory. This | |
| 7872 | patch implements those changes. | |
| 7873 | ||
| 7874 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7875 | ||
| 7876 | commit afd6e470f639883002c7c59d562690a5cb0f4865 | |
| 7877 | Author: Timur Tabi <timur@freescale.com> | |
| 7878 | Date: Wed Oct 25 18:45:23 2006 -0500 | |
| 7879 | ||
| 7880 | mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it | |
| 7881 | ||
| 7882 | commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a | |
| 7883 | Author: Timur Tabi <timur@freescale.com> | |
| 7884 | Date: Tue Aug 22 17:07:00 2006 -0500 | |
| 7885 | ||
| 7886 | mpc83xx: Add support for variable flash memory sizes on 83xx systems | |
| 7887 | ||
| 7888 | CHANGELOG: | |
| 7889 | ||
| 7890 | * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access | |
| 7891 | window registers, instead of using a hard-coded value of 8MB. | |
| 7892 | ||
| 7893 | Signed-off-by: Timur Tabi <timur@freescale.com> | |
| 7894 | ||
| 7895 | commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 | |
| 7896 | Author: Tanya Jiang <tanya.jiang@freescale.com> | |
| 7897 | Date: Thu Aug 3 18:38:13 2006 +0800 | |
| 7898 | ||
| 7899 | mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros | |
| 7900 | ||
| 7901 | Unified TQM834x variable names with 83xx and consolidated macro | |
| 7902 | in preparation for the 8360 and other upcoming 83xx devices. | |
| 7903 | ||
| 7904 | Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> | |
| 7905 | ||
| 7906 | commit f6eda7f80ccc13d658020268c507d7173cf2e8aa | |
| 7907 | Author: Dave Liu <daveliu@freescale.com> | |
| 7908 | Date: Wed Oct 25 14:41:21 2006 -0500 | |
| 7909 | ||
| 7910 | mpc83xx: Changed to unified mpx83xx names and added common 83xx changes | |
| 7911 | ||
| 7912 | Incorporated the common unified variable names and the changes in preparation | |
| 7913 | for releasing mpc8360 patches. | |
| 7914 | ||
| 7915 | Signed-off-by: Dave Liu <daveliu@freescale.com> | |
| 7916 | ||
| 7917 | commit 3894c46c27c64891f93ac04edde86a9fa9758d92 | |
| 7918 | Author: Tanya Jiang <tanya.jiang@freescale.com> | |
| 7919 | Date: Thu Aug 3 18:36:02 2006 +0800 | |
| 7920 | ||
| 7921 | mpc83xx: Fix missing build for mpc8349emds pci.c | |
| 7922 | ||
| 7923 | Make pci build for mpc8349emds | |
| 7924 | ||
| 7925 | Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> | |
| 7926 | ||
| 7927 | commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 | |
| 7928 | Author: Tanya Jiang <tanya.jiang@freescale.com> | |
| 7929 | Date: Thu Aug 3 18:39:49 2006 +0800 | |
| 7930 | ||
| 7931 | mpc83xx: Removed unused file resetvec.S for mpc83xx cpu | |
| 7932 | ||
| 7933 | Removed unused file resetvec.S for mpc83xx cpu | |
| 7934 | ||
| 7935 | Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com> | |
| 7936 | ||
| 7937 | commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf | |
| 7938 | Author: Nick Spence <Nick.Spence@freescale.com> | |
| 7939 | Date: Sat Sep 30 00:32:59 2006 -0700 | |
| 7940 | ||
| 7941 | NAND Flash verify across block boundaries | |
| 7942 | ||
| 7943 | This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is | |
| 7944 | defined | |
| 7945 | and the write crosses a block boundary. The pointer to the verification | |
| 7946 | buffer (bufstart) is not being updated to reflect the starting of the | |
| 7947 | new | |
| 7948 | block so the verification of the second block fails. | |
| 7949 | ||
| 7950 | CHANGELOG: | |
| 7951 | ||
| 7952 | * Fix NAND FLASH page verification across block boundaries | |
| 7953 | ||
| 7954 | commit f484dc791a3932537213c43c654cc1295c64b84c | |
| 7955 | Author: Nick Spence <nick.spence@freescale.com> | |
| 7956 | Date: Thu Sep 7 07:39:46 2006 -0700 | |
| 7957 | ||
| 7958 | Added RGMII support to the TSECs and Marvell 881111 Phy | |
| 7959 | ||
| 7960 | Added a phy initialization to adjust the RGMII RX and TX timing | |
| 7961 | Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode | |
| 7962 | ||
| 7963 | Signed-off-by: Nick Spence <nick.spence@freescale.com> | |
| 7964 | ||
| 2a26ec47 WD |
7965 | commit 4831c8b8a97799da77923d6bbb4c260c0d45521c |
| 7966 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 7967 | Date: Fri Nov 3 13:10:00 2006 +0800 | |
| 7968 | ||
| 7969 | Remove some unused CFG define. | |
| 7970 | undef CFG_DRAM_TEST | |
| 7971 | ||
| 7972 | commit 99c09c4dec34f77c243bf51bea532e3f339410ad | |
| 7973 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 7974 | Date: Fri Nov 3 13:07:36 2006 +0800 | |
| 7975 | ||
| 7976 | Change the TEXT_BASE from 0xFFF00000 to 0xFF000000. | |
| 7977 | Both work. 0xFF000000 seems more reasonable. | |
| 7978 | ||
| b21b511d WD |
7979 | commit c59200443072353044aa4bf737a5a60f9a9af231 |
| 7980 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 7981 | Date: Thu Nov 2 15:15:01 2006 +0100 | |
| 7982 | ||
| 7983 | Release U-Boot 1.1.6 | |
| 7984 | ||
| 2a26ec47 WD |
7985 | commit c1fbe4103a0d6c8957f912af902d705ba67836f2 |
| 7986 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 7987 | Date: Thu Nov 2 19:14:48 2006 +0800 | |
| 7988 | ||
| 7989 | This patch comes from Yuli's posted patch on 8/8/2006 | |
| 7990 | titled "CFI Driver Little-Endian write Issue". | |
| 7991 | ||
| 7992 | http://sourceforge.net/mailarchive/message.php?msg_id=36311999 | |
| 7993 | ||
| 7994 | If that patch applied, please discard this one. | |
| 7995 | Until now , I do not see his patch is applied. So please apply this one. | |
| 7996 | ||
| 7997 | Signed-off-by: Yuli Barcohen <yuli@arabellasw.com> | |
| 7998 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 7999 | ||
| 8000 | commit b825f158e449e1e9cf74c08e572955e122394c96 | |
| 8001 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8002 | Date: Thu Nov 2 19:12:31 2006 +0800 | |
| 8003 | ||
| 8004 | Tsi108 on chip i2c support. | |
| 8005 | ||
| 8006 | The i2c Interface provides a master-only, serial interface that can be | |
| 8007 | used for initializing Tsi108/Tsi109 registers from an EEPROM after a | |
| 8008 | device reset. | |
| 8009 | ||
| 8010 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> | |
| 8011 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8012 | ||
| 8013 | commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8 | |
| 8014 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8015 | Date: Thu Nov 2 19:11:06 2006 +0800 | |
| 8016 | ||
| 8017 | Tsi108 on chip pci controller support. | |
| 8018 | ||
| 8019 | If there is no pci card, the tsi108/109 pci configure read will | |
| 8020 | cause a machine check exception to the processor. PCI error should | |
| 8021 | also be cleared after the read. | |
| 8022 | ||
| 8023 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> | |
| 8024 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8025 | ||
| 8026 | commit d1927cee977126e547ceeba23e4f978f377cfb8f | |
| 8027 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8028 | Date: Thu Nov 2 19:08:55 2006 +0800 | |
| 8029 | ||
| 8030 | Tundra tsi108 on chip Ethernet controller support. | |
| 8031 | ||
| 8032 | The following is a brief description of the Ethernet controller: | |
| 8033 | The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent | |
| 8034 | Gigabit Ethernet ports,E0 and E1. It uses a single Management interface | |
| 8035 | to manage the two physical connection devices (PHYs). Each Ethernet port | |
| 8036 | has its own statistics monitor that tracks and reports key interface | |
| 8037 | statistics. Each port supports a 256-entry hash table for address | |
| 8038 | filtering. In addition, each port is bridged to the Switch Fabric | |
| 8039 | through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. | |
| 8040 | ||
| 8041 | Each Ethernet port also has a pair of internal Ethernet DMA channels to | |
| 8042 | support the transmit and receive data flows. The Ethernet DMA channels | |
| 8043 | use descriptors set up in memory, the memory map of the device, and | |
| 8044 | access via the Switch Fabric. The Ethernet Controller?s DMA arbiter | |
| 8045 | handles arbitration for the Switch Fabric. The Controller also | |
| 8046 | has a register businterface for register accesses and status monitor | |
| 8047 | control. | |
| 8048 | ||
| 8049 | The PMD (Physical Media Device) interface operates in MII, GMII, or TBI | |
| 8050 | modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. | |
| 8051 | The GMII and TBI modes are used to connect with Gigabit PMDs. Internal | |
| 8052 | data flows to and from the Ethernet Controller through the Switch Fabric. | |
| 8053 | ||
| 8054 | Each Ethernet port uses its transmit and receive DMA channels to manage | |
| 8055 | data flows through buffer descriptors that are predefined by the | |
| 8056 | system (the descriptors can exist anywhere in the system memory map). | |
| 8057 | These descriptors are data structures that point to buffers filled | |
| 8058 | with data ready to transmit over Ethernet, or they point to empty | |
| 8059 | buffers ready to receive data from Ethernet. | |
| 8060 | ||
| 8061 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> | |
| 8062 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8063 | ||
| 8064 | commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e | |
| 8065 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8066 | Date: Thu Nov 2 19:01:33 2006 +0800 | |
| 8067 | ||
| 8068 | Tundra tsi108 header file. | |
| 8069 | ||
| 8070 | The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for | |
| 8071 | PowerPC processors that offers numerous system interconnect options for | |
| 8072 | embedded application designers. The Tsi108 can interconnect 60x or | |
| 8073 | MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet, | |
| 8074 | and Flash. Provided the macro define for tsi108 chip. | |
| 8075 | ||
| 8076 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> | |
| 8077 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8078 | ||
| 8079 | commit 87c4db09699c6b89176b31004afcb83eb1585d47 | |
| 8080 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8081 | Date: Thu Nov 2 18:59:15 2006 +0800 | |
| 8082 | ||
| 8083 | Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. | |
| 8084 | mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2. | |
| 8085 | ||
| 8086 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> | |
| 8087 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8088 | ||
| 8089 | commit 27801b8ab11c61b577e45742a515bb3b23b80241 | |
| 8090 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8091 | Date: Thu Nov 2 18:57:21 2006 +0800 | |
| 8092 | ||
| 8093 | Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. | |
| 8094 | Make ,config.mk and link file for the mpc7448hpc2 board. | |
| 8095 | ||
| 8096 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> | |
| 8097 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8098 | ||
| 8099 | commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6 | |
| 8100 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8101 | Date: Thu Nov 2 18:55:04 2006 +0800 | |
| 8102 | ||
| 8103 | Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. | |
| 8104 | The mpc7448hpc2 board support header file. | |
| 8105 | ||
| 8106 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> | |
| 8107 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8108 | ||
| 8109 | commit 625bb5ddb50b243f931262ca8c46956409471917 | |
| 8110 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8111 | Date: Thu Nov 2 18:52:21 2006 +0800 | |
| 8112 | ||
| 8113 | Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support. | |
| 8114 | The mpc7448hpc2 board support low level assemble language init code. | |
| 8115 | ||
| 8116 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> | |
| 8117 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8118 | ||
| 8119 | commit 4c52783b3d024e153c4972b97332e314bc3bdc46 | |
| 8120 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8121 | Date: Thu Nov 2 18:49:51 2006 +0800 | |
| 8122 | ||
| 8123 | General code modification for mpc7448hpc2 board support. | |
| 8124 | 1. Add 7447A and 7448 processor support. | |
| 8125 | 2. Add the following flags. | |
| 8126 | ||
| 8127 | CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically | |
| 8128 | (such as by switch on board), this flag should be set. | |
| 8129 | ||
| 8130 | CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot | |
| 8131 | relocates to RAM, this flag should be set. | |
| 8132 | ||
| 8133 | CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the | |
| 8134 | system hang in exception, this flag should be set. | |
| 8135 | ||
| 8136 | There is a design issue for tsi108/109 pci configure read. When pci scan | |
| 8137 | the slots, if there is no pci card, the tsi108/9 will cause a machine | |
| 8138 | check exception for mpc7448 processor. | |
| 8139 | ||
| 8140 | Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> | |
| 8141 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8142 | ||
| 8143 | commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695 | |
| 8144 | Author: roy zang <tie-fei.zang@freescale.com> | |
| 8145 | Date: Thu Nov 2 18:34:47 2006 +0800 | |
| 8146 | ||
| 8147 | Add README file for mpc7448hpc2 board. | |
| 8148 | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> | |
| 8149 | ||
| b21b511d WD |
8150 | commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526 |
| 8151 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 8152 | Date: Wed Nov 1 02:04:38 2006 +0100 | |
| 8153 | ||
| 8154 | Finish up support for MarelV38B board | |
| 8155 | - add watchdog support | |
| 8156 | - enable GPIO_WKUP_7 pin for input | |
| 8157 | - code cleanup | |
| 8158 | ||
| 8159 | commit ffa150bc90c943ca265170bd1be3f293674dd5c7 | |
| 8160 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 8161 | Date: Wed Nov 1 01:45:46 2006 +0100 | |
| 8162 | ||
| 8163 | - Fix issues related to the use of ELDK 4 when compiling for MarelV38B: | |
| 8164 | * remove warnings when compiling ethaddr.c | |
| 8165 | * adjust linker script (fixes a crash resulting from incorrect | |
| 8166 | definition of __u_boot_cmd_start) | |
| 8167 | - Some MarelV38B code cleanup. | |
| 8168 | ||
| 8169 | commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385 | |
| 8170 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 8171 | Date: Wed Nov 1 01:38:16 2006 +0100 | |
| 8172 | ||
| 8173 | - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the | |
| 8174 | MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's | |
| 8175 | Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with | |
| 8176 | MPC5XXX_WU_GPIO_DATA_O for affected boards. | |
| 8177 | ||
| 8178 | - Add defintions for some MPC5XXX GPIO pins. | |
| 8179 | ||
| 8180 | commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8 | |
| 8181 | Author: Bartlomiej Sieka <tur@semihalf.com> | |
| 8182 | Date: Wed Nov 1 01:34:29 2006 +0100 | |
| 8183 | ||
| 8184 | Changed MarelV38B board make target to lowercase. Config file cleanup. | |
| 8185 | ||
| c5920044 WD |
8186 | commit 1954be6e9c9421b45d0a9d05b10356acc7563150 |
| 8187 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 8188 | Date: Sun Oct 29 01:03:51 2006 +0200 | |
| 8189 | ||
| 8190 | Automatically adjust ARFLAGS so "make -s" is really silent. | |
| 8191 | ||
| 8192 | commit fae684e89844856383bdf101440889557df3e6b1 | |
| 8193 | Author: Stefan Roese <sr@denx.de> | |
| 8194 | Date: Sat Oct 28 16:45:00 2006 +0200 | |
| 8195 | ||
| 8196 | [PATCH] omap925.c: Remove unused functions | |
| 8197 | ||
| 8198 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> | |
| 8199 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 8200 | ||
| 8201 | commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776 | |
| 8202 | Author: Stefan Roese <sr@denx.de> | |
| 8203 | Date: Sat Oct 28 17:12:58 2006 +0200 | |
| 8204 | ||
| 8205 | [PATCH] Add some missing machtypes for netstar & voiceblue boards | |
| 8206 | ||
| 8207 | Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of | |
| 8208 | numbers in code. | |
| 8209 | ||
| 8210 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> | |
| 8211 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 8212 | ||
| 8213 | commit 856f054410cef52d868feb330168b2a4c4091328 | |
| 8214 | Author: Stefan Roese <sr@denx.de> | |
| 8215 | Date: Sat Oct 28 15:55:52 2006 +0200 | |
| 8216 | ||
| 8217 | [PATCH] NAND: Partition name support added to NAND subsystem | |
| 8218 | ||
| 8219 | chpart, nboot and NAND subsystem related commands now accept also partition | |
| 8220 | name to specify offset. | |
| 8221 | ||
| 8222 | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> | |
| 8223 | Signed-off-by: Stefan Roese <sr@denx.de> | |
| 8224 | ||
| 8225 | commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6 | |
| 8226 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 8227 | Date: Sat Oct 28 02:29:44 2006 +0200 | |
| 8228 | ||
| 8229 | Update CHANGELOG. | |
| 8230 | ||
| 07a69a18 WD |
8231 | commit 2751a95abd1b96911081c357e96a12fa97b40dee |
| 8232 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 8233 | Date: Sat Oct 28 02:29:14 2006 +0200 | |
| 8234 | ||
| 8235 | Enable commandline editing and hush shell on all TQM boards. | |
| 8236 | ||
| 8237 | commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7 | |
| 8238 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 8239 | Date: Sat Oct 28 02:28:02 2006 +0200 | |
| 8240 | ||
| 8241 | README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE | |
| 8242 | ||
| 8243 | commit 471a7be7a042e95e440f5de969c9765214ae8d6e | |
| 8244 | Author: Wolfgang Denk <wd@denx.de> | |
| 8245 | Date: Sat Oct 28 01:14:32 2006 +0200 | |
| 8246 | ||
| 8247 | Check for illegal character '=' in environment variable names. | |
| 8248 | ||
| 8249 | Make sure the string passed as variable name does not contain a '=' | |
| 8250 | character. This not only prevents the common error or typing | |
| 8251 | "setenv foo=bar" instead of "setenv foo bar", but (more importantly) | |
| 8252 | also closes a backdoor which allowed to delete write-protected | |
| 8253 | environment variables, for example by using "setenv ethaddr=". | |
| 8254 | ||
| 8255 | commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2 | |
| 8256 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 8257 | Date: Sat Oct 28 00:38:39 2006 +0200 | |
| 8258 | ||
| 8259 | Minor code cleanup. | |
| 8260 | ||
| 8261 | commit e11887a77d81077416a2d1c5e0354916fee8c034 | |
| 8262 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 8263 | Date: Thu Oct 26 17:55:31 2006 +0200 | |
| 8264 | ||
| 8265 | Don't pass any debug options directly to the assembler | |
| 8266 | ||
| 8267 | When passing the -g option to gcc, gcc automatically selects a | |
| 8268 | suitable --g<format> option to pass on to the assembler. | |
| 8269 | Thus, there's no point in forcing a specific debug option on the | |
| 8270 | assembler using the -Wa mechanism. | |
| 8271 | ||
| 8272 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 8273 | ||
| 8274 | commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393 | |
| 8275 | Author: Jon Loeliger <jdl@freescale.com> | |
| 8276 | Date: Fri Oct 27 07:47:22 2006 -0500 | |
| 8277 | ||
| 8278 | MPC86xx: Cleaned up unused and conditionally used local variables. | |
| 8279 | ||
| 8280 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| 8281 | ||
| 8282 | commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9 | |
| 8283 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 8284 | Date: Fri Oct 27 11:55:21 2006 +0200 | |
| 8285 | ||
| 8286 | Fix "ar" flags in some Makefiles to allow for silent "make -s" | |
| 8287 | ||
| 8288 | commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f | |
| 8289 | Author: Ben Warren <bwarren@qstreams.com> | |
| 8290 | Date: Thu Oct 26 14:38:25 2006 -0400 | |
| 8291 | ||
| 8292 | Fix TSEC driver (now for real): avoid crashes if PHY is not attached | |
| 8293 | to a TSEC (e.g. a switch is connected via RMII) or | |
| 8294 | if the PHY is defective/incorrectly configured. | |
| 8295 | ||
| 8296 | Signed-off-by: Ben Warren <bwarren@qstreams.com> | |
| 8297 | ||
| 8298 | commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999 | |
| 8299 | Author: Ben Warren <bwarren@qstreams.com> | |
| 8300 | Date: Thu Oct 26 14:38:25 2006 -0400 | |
| 8301 | ||
| 8302 | Fix TSEC driver: avoid crashes if PHY is not attached | |
| 8303 | to a TSEC (e.g. a switch is connected via RMII) or | |
| 8304 | if the PHY is defective/incorrectly configured. | |
| 8305 | ||
| 8306 | Signed-off-by: Ben Warren <bwarren@qstreams.com> | |
| 8307 | ||
| b985b5d6 BW |
8308 | commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6 |
| 8309 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 8310 | Date: Thu Oct 26 16:24:31 2006 +0200 | |
| 8311 | ||
| 8312 | Code cleanup. | |
| 8313 | ||
| 2b2a40be WD |
8314 | commit 5e3b0bc19f07ed277d85324ad0427642c8981baf |
| 8315 | Author: Haavard Skinnemoen <hskinnemoen@atmel.com> | |
| 8316 | Date: Wed Oct 25 15:48:59 2006 +0200 | |
| 8317 | ||
| 8318 | Finish up support for the ATSTK1000/ATSTK1002 boards | |
| b985b5d6 | 8319 | |
| 2b2a40be WD |
8320 | Add atstk1002_config target to Makefile and move the AVR32 section |
| 8321 | down below Blackfin so that it doesn't end up in the middle of | |
| 8322 | MIPS. | |
| b985b5d6 | 8323 | |
| 2b2a40be WD |
8324 | Drop the autogenerated linker script thing for now. Will have to |
| 8325 | revisit how to handle chips with different flash and RAM layout | |
| 8326 | later. | |
| b985b5d6 | 8327 | |
| 2b2a40be WD |
8328 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 8329 | ||
| 8330 | commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4 | |
| 8331 | Author: Kumar Gala <galak@kernel.crashing.org> | |
| 8332 | Date: Tue Oct 24 23:47:37 2006 -0500 | |
| 8333 | ||
| 8334 | Added support for Multi-Image files that contain a device tree | |
| b985b5d6 | 8335 | |
| 2b2a40be WD |
8336 | If a Multi-Image file contains a third image we try to use it as a |
| 8337 | device tree. The device tree image is assumed to be uncompressed in the | |
| f4eb5452 | 8338 | image file. We automatically allocate space for the device tree in memory |
| 2b2a40be | 8339 | and provide an 8k pad to allow more than a reasonable amount of growth. |
| b985b5d6 | 8340 | |
| 2b2a40be WD |
8341 | Additionally, a device tree that was contained in flash will now automatically |
| 8342 | get copied to system memory as part of boot. Previously an error was | |
| 8343 | reported if one tried to boot a device tree that was in flash. | |
| b985b5d6 | 8344 | |
| 2b2a40be WD |
8345 | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
| 8346 | ||
| 4e53a258 WD |
8347 | commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512 |
| 8348 | Author: Wolfgang Denk <wd@denx.de> | |
| 2b2a40be | 8349 | Date: Tue Oct 24 21:35:55 2006 +0200 |
| 4e53a258 WD |
8350 | |
| 8351 | Switch to automatically generated CHANGELOG file. | |
| 8352 | (use "make CHANGELOG" to update it from time to time) | |
| 8353 | ||
| 7c52c4b9 WD |
8354 | commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6 |
| 8355 | Author: Stefan Roese <sr@denx.de> | |
| 2b2a40be | 8356 | Date: Tue Oct 24 18:06:48 2006 +0200 |
| 7c52c4b9 WD |
8357 | |
| 8358 | Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c | |
| 8359 | Patch by Stefan Roese, 24 Oct 2006 | |
| 8360 | ||
| 8361 | commit 8ae3b713b2286e0c3213b7802062e4c1599010de | |
| 8362 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 2b2a40be | 8363 | Date: Tue Oct 24 17:24:55 2006 +0200 |
| 7c52c4b9 WD |
8364 | |
| 8365 | Merge with /home/wd/git/u-boot/master | |
| 8366 | ||
| 8367 | commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e | |
| 8368 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 2b2a40be | 8369 | Date: Tue Oct 24 15:32:57 2006 +0200 |
| 7c52c4b9 WD |
8370 | |
| 8371 | Code cleanup | |
| 8372 | ||
| 8373 | commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e | |
| 8374 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 2b2a40be | 8375 | Date: Tue Oct 24 14:51:36 2006 +0200 |
| 7c52c4b9 WD |
8376 | |
| 8377 | Move atstk1000 files into vendor specific directory. | |
| 8378 | Patch by Haavard Skinnemoen, 12 Sep 2006 | |
| 8379 | ||
| 8380 | commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37 | |
| 8381 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 2b2a40be | 8382 | Date: Tue Oct 24 14:42:37 2006 +0200 |
| 7c52c4b9 WD |
8383 | |
| 8384 | Add ATSTK1000 and ATSTK1002 board support | |
| 8385 | Patch by Haavard Skinnemoen, 06 Sep 2006 | |
| b985b5d6 | 8386 | |
| 7c52c4b9 WD |
8387 | This patch adds support for the ATSTK1000 with the ATSTK1002 CPU |
| 8388 | daughterboard. | |
| b985b5d6 | 8389 | |
| 7c52c4b9 WD |
8390 | ATSTK1000 is a full-featured development board for AT32AP CPUs. It |
| 8391 | has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, | |
| 8392 | and connectors for USART, PS/2, VGA, USB, MMC/SD cards and | |
| 8393 | CompactFlash cards. For more information, please see this page: | |
| b985b5d6 | 8394 | |
| 7c52c4b9 | 8395 | http://www.atmel.com/dyn/products/tools.asp?family_id=682 |
| b985b5d6 | 8396 | |
| 7c52c4b9 WD |
8397 | The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the |
| 8398 | AT32AP7000 chip. | |
| b985b5d6 | 8399 | |
| 7c52c4b9 WD |
8400 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 8401 | ||
| 8402 | commit f93ae788c3640fcde5db383471d45548ff4060d0 | |
| 8403 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 2b2a40be | 8404 | Date: Tue Oct 24 14:31:24 2006 +0200 |
| 7c52c4b9 WD |
8405 | |
| 8406 | Add common serial driver for Atmel AT32 and AT91 chips | |
| 8407 | Patch by Haavard Skinnemoen, 06 Sep 2006 | |
| b985b5d6 | 8408 | |
| 7c52c4b9 WD |
8409 | This is a first attempt at creating a common serial driver for Atmel |
| 8410 | chips. For now, it supports the AT32AP7000 AVR32 chip, but it should | |
| 8411 | be possible to support AT91RM9200 and other ARM-based chips with some | |
| 8412 | minor modifications. | |
| b985b5d6 | 8413 | |
| 7c52c4b9 WD |
8414 | There's nothing fundamentally AVR32-specific in this driver, but it |
| 8415 | does use some features which are currently only defined for the | |
| 8416 | AT32AP CPU port: | |
| 8417 | * pm_get_clock_freq: Obtain the clock frequency of a given domain | |
| 8418 | * gd->console_uart: A "struct device" containing information about | |
| 2b2a40be WD |
8419 | register mappings, gpio resources and clocks associated with the |
| 8420 | UART device. | |
| b985b5d6 | 8421 | |
| 7c52c4b9 WD |
8422 | For more information about these features, please see the "AT32AP |
| 8423 | CPU" patch. | |
| 8424 | ||
| 8425 | commit 72a087e04705c26cad982879ebd06b5281bf825a | |
| 8426 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 2b2a40be | 8427 | Date: Tue Oct 24 14:27:35 2006 +0200 |
| 7c52c4b9 WD |
8428 | |
| 8429 | Add AT32AP CPU and AT32AP7000 SoC support | |
| 8430 | Patch by Haavard Skinnemoen, 06 Sep 2006 | |
| b985b5d6 | 8431 | |
| 7c52c4b9 WD |
8432 | This patch adds support for the AT32AP CPU family and the AT32AP7000 |
| 8433 | chip, which is the first chip implementing the AVR32 architecture. | |
| b985b5d6 | 8434 | |
| 7c52c4b9 WD |
8435 | The AT32AP CPU core is a high-performance implementation featuring a |
| 8436 | 7-stage pipeline, separate instruction- and data caches, and a MMU. | |
| 8437 | For more information, please see the "AVR32 AP Technical Reference": | |
| b985b5d6 | 8438 | |
| 7c52c4b9 | 8439 | http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf |
| b985b5d6 | 8440 | |
| 7c52c4b9 WD |
8441 | In addition to this, the AT32AP7000 chip comes with a large set of |
| 8442 | integrated peripherals, many of which are shared with the AT91 series | |
| 8443 | of ARM-based microcontrollers from Atmel. Full data sheet is | |
| 8444 | available here: | |
| b985b5d6 | 8445 | |
| 7c52c4b9 | 8446 | http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf |
| b985b5d6 | 8447 | |
| 7c52c4b9 WD |
8448 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 8449 | ||
| 8450 | commit 7b64fef33c66be648826c0ff9758298ef13d0604 | |
| 8451 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 2b2a40be | 8452 | Date: Tue Oct 24 14:21:16 2006 +0200 |
| 7c52c4b9 WD |
8453 | |
| 8454 | Add AVR32 architecture support | |
| 8455 | Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 | |
| b985b5d6 | 8456 | |
| 7c52c4b9 WD |
8457 | This patch adds common infrastructure code for the Atmel AVR32 |
| 8458 | architecture. See doc/README.AVR32 for details. | |
| b985b5d6 | 8459 | |
| 7c52c4b9 WD |
8460 | Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> |
| 8461 | ||
| 8462 | commit 2da2d9a4766063b9848f3a35ad6025499cf87265 | |
| 8463 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 2b2a40be | 8464 | Date: Tue Oct 24 13:57:33 2006 +0200 |
| 7c52c4b9 WD |
8465 | |
| 8466 | Use -g instead of -gstabs in AFLAGS_DEBUG | |
| 8467 | Patch by Haavard Skinnemoen, 30 Aug 2006 | |
| b985b5d6 | 8468 | |
| 7c52c4b9 WD |
8469 | In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no |
| 8470 | matter what the target's preferred debugging format is. This patch | |
| 8471 | simply replaces -gstabs with -g, so that the default debugging format | |
| 8472 | for the architecture is used. | |
| 8473 | ||
| 8474 | commit 965829872169c2996023840d98e1d85ad148d629 | |
| 8475 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 2b2a40be | 8476 | Date: Tue Oct 24 13:55:18 2006 +0200 |
| 7c52c4b9 WD |
8477 | |
| 8478 | Fix/workaround broken dependency handling with make 3.81 | |
| 8479 | Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200 | |
| 8480 | ||
| 8481 | commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a | |
| 8482 | Author: Marian Balakowicz <m8@semihalf.com> | |
| 2b2a40be | 8483 | Date: Mon Oct 23 22:17:05 2006 +0200 |
| 7c52c4b9 WD |
8484 | |
| 8485 | Fix sequoia separate object direcory building problems. | |
| 8486 | ||
| 8487 | commit 3dfa9cfdcee78b30da3432318b32821ffabe974b | |
| 8488 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8489 | Date: Fri Oct 20 17:16:35 2006 -0500 |
| 7c52c4b9 WD |
8490 | |
| 8491 | Use generic I2C register block on 85xx and 86xx. | |
| b985b5d6 | 8492 | |
| 7c52c4b9 WD |
8493 | Replace private IMMAP I2C structures with generic reg block |
| 8494 | and allow 86xx to have multiple I2C device busses. | |
| b985b5d6 | 8495 | |
| 7c52c4b9 WD |
8496 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 8497 | ||
| 8498 | commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c | |
| 8499 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8500 | Date: Fri Oct 20 15:54:34 2006 -0500 |
| 7c52c4b9 WD |
8501 | |
| 8502 | Fix compilation warnings on a few 85xx boards. | |
| b985b5d6 | 8503 | |
| 7c52c4b9 WD |
8504 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 8505 | ||
| 8506 | commit 2047672684cf85cb6f96a1fbc993180aaaf19a99 | |
| 8507 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8508 | Date: Fri Oct 20 15:50:15 2006 -0500 |
| 7c52c4b9 WD |
8509 | |
| 8510 | Converted all 85xx boards to use a common FSL I2C driver. | |
| 8511 | Introduced COFIG_FSL_I2C to select the common FSL I2C driver. | |
| 8512 | And removed hard i2c path from a few u-boot.lds scipts too. | |
| 8513 | Minor whitespace cleanups along the way. | |
| b985b5d6 | 8514 | |
| 7c52c4b9 WD |
8515 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 8516 | ||
| 8517 | commit 4d45f69e362b05892c9e92a7907e5820995612aa | |
| 8518 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8519 | Date: Thu Oct 19 12:02:24 2006 -0500 |
| 7c52c4b9 WD |
8520 | |
| 8521 | Rewrite a series of goto statements as a sequences of | |
| 8522 | conditional expressions instead. | |
| b985b5d6 | 8523 | |
| 7c52c4b9 | 8524 | Use consistent return code 0/-1 for good/bad indicators. |
| b985b5d6 | 8525 | |
| 7c52c4b9 | 8526 | Include one fewer file if the driver isn't used at all. |
| b985b5d6 | 8527 | |
| 7c52c4b9 WD |
8528 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 8529 | ||
| 8530 | commit 7237c033b02fe295880435f1eb80819a0c987532 | |
| 8531 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8532 | Date: Thu Oct 19 11:02:16 2006 -0500 |
| 7c52c4b9 WD |
8533 | |
| 8534 | Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c | |
| b985b5d6 | 8535 | |
| 7c52c4b9 WD |
8536 | in an effort to begin to unify the umpteen FSL I2C drivers that |
| 8537 | are all otherwise very similar. | |
| b985b5d6 | 8538 | |
| 7c52c4b9 WD |
8539 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 8540 | ||
| 8541 | commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b | |
| 8542 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8543 | Date: Thu Oct 19 11:33:52 2006 -0500 |
| 7c52c4b9 WD |
8544 | |
| 8545 | * Fix a bunch of compiler warnings for gcc 4.0 | |
| b985b5d6 | 8546 | |
| 7c52c4b9 WD |
8547 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
| 8548 | ||
| 2b2a40be WD |
8549 | commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2 |
| 8550 | Author: Stefan Roese <sr@denx.de> | |
| 8551 | Date: Tue Oct 17 06:14:31 2006 +0200 | |
| 8552 | ||
| 8553 | Add monitor functions for indirect access to PPC440 DCR's | |
| 8554 | Patch by Leonid Baryudin, 12 Oct 2006 | |
| 8555 | ||
| 7c52c4b9 WD |
8556 | commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09 |
| 8557 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8558 | Date: Fri Oct 13 16:47:53 2006 -0500 |
| 7c52c4b9 WD |
8559 | |
| 8560 | Fixed leading whitespace issues. | |
| 8561 | Removed spurious LAWAR thing. | |
| b985b5d6 | 8562 | |
| 7c52c4b9 WD |
8563 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 8564 | ||
| 8565 | commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391 | |
| 8566 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8567 | Date: Thu Oct 12 10:42:36 2006 -0500 |
| 7c52c4b9 WD |
8568 | |
| 8569 | Remove unneeded include files and local variable. | |
| b985b5d6 | 8570 | |
| 7c52c4b9 WD |
8571 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 8572 | ||
| 8573 | commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5 | |
| 8574 | Author: Grant Likely <grant.likely@secretlab.ca> | |
| 2b2a40be | 8575 | Date: Tue Oct 10 00:23:32 2006 -0600 |
| 7c52c4b9 WD |
8576 | |
| 8577 | Fix possible uninitialized variable compiler warning. | |
| b985b5d6 | 8578 | |
| 7c52c4b9 WD |
8579 | When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in |
| 8580 | do_bootm_linux() may be uninitialized. There is no possibility in the | |
| 8581 | current code that len will get used uninitialized, but this fix follows | |
| 8582 | the existing convention of setting both len and data to zero at the same | |
| 8583 | time. | |
| b985b5d6 | 8584 | |
| 7c52c4b9 WD |
8585 | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> |
| 8586 | ||
| 8587 | commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e | |
| 8588 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8589 | Date: Wed Oct 11 15:13:01 2006 -0500 |
| 7c52c4b9 WD |
8590 | |
| 8591 | * Fix a bunch of compiler warnings for gcc 4.0 | |
| b985b5d6 | 8592 | |
| 7c52c4b9 WD |
8593 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
| 8594 | ||
| 8595 | commit bf651baa365e5447246aad6a633ccd667cf24a39 | |
| 8596 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8597 | Date: Wed Oct 11 10:10:43 2006 -0500 |
| 7c52c4b9 WD |
8598 | |
| 8599 | Move "ar" flags to config.mk to allow for silent "make -s" | |
| 8600 | ||
| 8601 | commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e | |
| 8602 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8603 | Date: Tue Oct 10 17:19:03 2006 -0500 |
| 7c52c4b9 WD |
8604 | |
| 8605 | Coding style changes to remove local varible blocks | |
| 8606 | and reformat a bit nicer. | |
| 8607 | ||
| 8608 | commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a | |
| 8609 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8610 | Date: Tue Oct 10 17:16:04 2006 -0500 |
| 7c52c4b9 WD |
8611 | |
| 8612 | Fix whitespace issues. | |
| 8613 | ||
| 8614 | commit 7b382b7125f2397cce63253df62f183e3dfa2770 | |
| 8615 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8616 | Date: Tue Oct 10 17:14:45 2006 -0500 |
| 7c52c4b9 WD |
8617 | |
| 8618 | Fix whitespace issues. | |
| 8619 | ||
| 8620 | commit e10390ddd736b0dad1528eec4b0fe35c0827139a | |
| 8621 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8622 | Date: Tue Oct 10 17:06:53 2006 -0500 |
| 27e166b8 | 8623 | |
| 7c52c4b9 WD |
8624 | Fix whitespace issues. |
| 8625 | ||
| 8626 | commit 89875e96ba3f023157bf50d5f8e33bf254964a76 | |
| 8627 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8628 | Date: Tue Oct 10 17:03:43 2006 -0500 |
| 7c52c4b9 WD |
8629 | |
| 8630 | Ran lindent and cleaned up whitespace issues. | |
| 8631 | Format for 80-columns too. | |
| 8318fbf8 | 8632 | |
| 7c52c4b9 WD |
8633 | commit 333961ae7095fc66d8a041fce1ac9ee873b09d86 |
| 8634 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8635 | Date: Tue Oct 10 17:02:22 2006 -0500 |
| 7ade0c63 | 8636 | |
| 7c52c4b9 | 8637 | Fix whitespace and 80-col issues. |
| ba999c53 | 8638 | |
| 8d9a8610 WD |
8639 | commit 5c912cb1c31266c66ca59b36f9b6f87296421d75 |
| 8640 | Author: Stefan Roese <sr@denx.de> | |
| 8641 | Date: Sat Oct 7 11:36:51 2006 +0200 | |
| 8642 | ||
| 8643 | CFG_NAND_QUIET_TEST added to not warn upon missing NAND device | |
| 8644 | Patch by Stefan Roese, 07 Oct 2006 | |
| 8645 | ||
| 8646 | commit 5bc528fa4da751d472397b308137238a6465afd2 | |
| 8647 | Author: Stefan Roese <sr@denx.de> | |
| 8648 | Date: Sat Oct 7 11:35:25 2006 +0200 | |
| 8649 | ||
| 8650 | Update ALPR code (NAND support working now) | |
| 8651 | Patch by Stefan Roese, 07 Oct 2006 | |
| 8652 | ||
| 8653 | commit 77d5034847d328753b80c46b83f960a14a26f40e | |
| 8654 | Author: Stefan Roese <sr@denx.de> | |
| 8655 | Date: Sat Oct 7 11:33:03 2006 +0200 | |
| 8656 | ||
| 8657 | Remove compile warnings in fpga code | |
| 8658 | Patch by Stefan Roese, 07 Oct 2006 | |
| 8659 | ||
| 8660 | commit f3443867e90d2979a7dd1c65b0d537777e1f9850 | |
| 8661 | Author: Stefan Roese <sr@denx.de> | |
| 8662 | Date: Sat Oct 7 11:30:52 2006 +0200 | |
| 8663 | ||
| 8664 | Add CONFIG_BOARD_RESET to configure board specific reset function | |
| 8665 | Patch by Stefan Roese, 07 Oct 2006 | |
| 8666 | ||
| 7c52c4b9 WD |
8667 | commit f55df18187e7a45cb73fec4370d12135e6691ae1 |
| 8668 | Author: John Traill <john.traill@freescale.com> | |
| 2b2a40be | 8669 | Date: Fri Sep 29 08:23:12 2006 +0100 |
| f836e414 | 8670 | |
| 7c52c4b9 | 8671 | Fix missing tCycle/modfreq calculation. |
| b985b5d6 | 8672 | |
| 7c52c4b9 | 8673 | Signed-off-by: John Traill <john.traill@freescale.com> |
| f6414714 | 8674 | |
| 7c52c4b9 WD |
8675 | commit 8272dc2f58f2473d8995fcc9b916440cfba080f0 |
| 8676 | Author: Andy Fleming <afleming@freescale.com> | |
| 2b2a40be | 8677 | Date: Wed Sep 13 10:33:35 2006 -0500 |
| 6a0766ed | 8678 | |
| 7c52c4b9 | 8679 | Updated config headers to add default FDT-based booting |
| edf0b543 | 8680 | |
| 7c52c4b9 WD |
8681 | commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3 |
| 8682 | Author: Andy Fleming <afleming@freescale.com> | |
| 2b2a40be | 8683 | Date: Wed Sep 13 10:34:18 2006 -0500 |
| 3231ea64 | 8684 | |
| 7c52c4b9 | 8685 | Add support for eTSEC 3 & 4 on 8548 CDS |
| b985b5d6 | 8686 | |
| 7c52c4b9 WD |
8687 | * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS. |
| 8688 | This will only work on rev 1.3 boards (but doesn't break older boards) | |
| 8689 | * Cleaned up some comments to reflect the expanded role of tsec | |
| 8690 | in other systems | |
| d7762337 | 8691 | |
| 7c52c4b9 WD |
8692 | commit 084d648b109c8984f83674043c1a7fa3885ef801 |
| 8693 | Author: Andy Fleming <afleming@freescale.com> | |
| 2b2a40be | 8694 | Date: Wed Sep 13 10:33:56 2006 -0500 |
| e0a46554 | 8695 | |
| 7c52c4b9 | 8696 | Added code to support 2.6.18 PCI changes in u-boot |
| b985b5d6 | 8697 | |
| 7c52c4b9 | 8698 | * Added code to swizzle the IRQ map for the PCI |
| 87621bc2 | 8699 | |
| 7c52c4b9 WD |
8700 | commit afbdc649f8751e4f4f1a6f527edfe139773f2c15 |
| 8701 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8702 | Date: Tue Sep 19 09:34:10 2006 -0500 |
| 5c34eee9 | 8703 | |
| 7c52c4b9 | 8704 | Modified makefile for new build mechanism. |
| b985b5d6 | 8705 | |
| 7c52c4b9 | 8706 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 752d6837 | 8707 | |
| 7c52c4b9 WD |
8708 | commit d14ba6a798beb753e7a864500414fcc2d198b8bc |
| 8709 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8710 | Date: Thu Sep 14 08:40:36 2006 -0500 |
| 2255b2d2 | 8711 | |
| 7c52c4b9 WD |
8712 | Handle 86xx SVR values according to the new Reference Manual. |
| 8713 | Both 8641 and 8641D have SVR == 0x8090, and are distinguished | |
| 8714 | by the byte in bits 16-23 instead. | |
| 8715 | Thanks to Jason Jin for noticing. | |
| b985b5d6 | 8716 | |
| 7c52c4b9 | 8717 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 1a1b7374 | 8718 | |
| 7c52c4b9 WD |
8719 | commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7 |
| 8720 | Author: Zhang Wei <wei.zhang@freescale.com> | |
| 2b2a40be | 8721 | Date: Mon Aug 28 14:25:31 2006 +0800 |
| d262a92f | 8722 | |
| 7c52c4b9 WD |
8723 | Fixed an OF-tree off-by-one bug when adding a new property name. |
| 8724 | This bug will cause the kernel booting to pause a long time. | |
| b985b5d6 | 8725 | |
| 7c52c4b9 WD |
8726 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 8727 | (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit) | |
| d82718fe | 8728 | |
| 7c52c4b9 WD |
8729 | commit 9bff7a69a885adebbd2bd45990494ec4cf998a30 |
| 8730 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8731 | Date: Tue Aug 29 11:05:09 2006 -0500 |
| 1d92b2e5 | 8732 | |
| 7c52c4b9 | 8733 | Remove trailing empty lines. |
| 2b208f53 | 8734 | |
| 7c52c4b9 WD |
8735 | commit cd6d73d5b895a5935ac4fde0a356288142a584e0 |
| 8736 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8737 | Date: Tue Aug 29 09:48:49 2006 -0500 |
| 511d0c72 | 8738 | |
| 7c52c4b9 | 8739 | Remove bogus msync and use volatile asm. |
| 8d4ac794 | 8740 | |
| 7c52c4b9 WD |
8741 | commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e |
| 8742 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8743 | Date: Tue Aug 29 08:17:14 2006 -0500 |
| ac611700 | 8744 | |
| 7c52c4b9 | 8745 | Add myself as maintainer for MPC8641HPCN. |
| 7299712c | 8746 | |
| 7c52c4b9 WD |
8747 | commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d |
| 8748 | Author: Zhang Wei <wei.zhang@freescale.com> | |
| 2b2a40be | 8749 | Date: Mon Aug 28 14:25:31 2006 +0800 |
| 56fb6ba1 | 8750 | |
| 7c52c4b9 WD |
8751 | Fixed an OF-tree off-by-one bug when adding a new property name. |
| 8752 | This bug will cause the kernel booting to pause a long time. | |
| b985b5d6 | 8753 | |
| 7c52c4b9 | 8754 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| d373325e | 8755 | |
| 7c52c4b9 WD |
8756 | commit 5567806b67d0ae83493aa8823ad3b6c914f581d7 |
| 8757 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 8758 | Date: Fri Aug 25 14:38:34 2006 -0400 |
| aeec782b | 8759 | |
| 7c52c4b9 WD |
8760 | Change ramdiskaddr and dtbaddr |
| 8761 | Remove PEX fluff commands. | |
| b985b5d6 | 8762 | |
| 7c52c4b9 WD |
8763 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| 8764 | Signed-off-by: Jon Loeliger <jdl@freescale.com> | |
| d214fbbd | 8765 | |
| 7c52c4b9 WD |
8766 | commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e |
| 8767 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8768 | Date: Wed Aug 23 13:32:45 2006 -0500 |
| 854bc8da | 8769 | |
| 7c52c4b9 | 8770 | * Another small fix for booting with disable_of |
| b985b5d6 | 8771 | |
| 7c52c4b9 | 8772 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
| d12ae808 | 8773 | |
| 7c52c4b9 WD |
8774 | commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c |
| 8775 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8776 | Date: Wed Aug 23 11:04:43 2006 -0500 |
| a73c8dbb | 8777 | |
| 7c52c4b9 | 8778 | Cleanup and lindent new AHCI driver. |
| a87d46f7 | 8779 | |
| 7c52c4b9 WD |
8780 | commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de |
| 8781 | Author: Jin Zhengxiong <jason@bus.ap.freescale.net> | |
| 2b2a40be | 8782 | Date: Wed Aug 23 19:15:12 2006 +0800 |
| baf31249 | 8783 | |
| 7c52c4b9 | 8784 | Add AHCI define and sata support for MPC8641HPCN board. |
| b985b5d6 | 8785 | |
| 7c52c4b9 | 8786 | Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| 5e09054a | 8787 | |
| 7c52c4b9 WD |
8788 | commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4 |
| 8789 | Author: Jin Zhengxiong <jason@bus.ap.freescale.net> | |
| 2b2a40be | 8790 | Date: Wed Aug 23 19:10:44 2006 +0800 |
| 4f0645eb | 8791 | |
| 7c52c4b9 | 8792 | Add AHCI support to u-boot |
| b985b5d6 | 8793 | |
| 7c52c4b9 WD |
8794 | Add AHCI support in u-boot, enable the sata disk controllers which |
| 8795 | following the AHCI protocol. | |
| b985b5d6 | 8796 | |
| 7c52c4b9 | 8797 | Signed-off-by:Jason Jin<jason.jin@freescale.com> |
| 2d658967 | 8798 | |
| 7c52c4b9 WD |
8799 | commit d8ea2acf5f137cae99417df4f573d036ee384668 |
| 8800 | Author: Zhang Wei <wei.zhang@freescale.com> | |
| 2b2a40be | 8801 | Date: Wed Aug 23 17:54:32 2006 +0800 |
| efa20585 | 8802 | |
| 7c52c4b9 | 8803 | Add dtb boot-up parameter to default boot commands. |
| b985b5d6 | 8804 | |
| 7c52c4b9 | 8805 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 8cacfb85 | 8806 | |
| 7c52c4b9 WD |
8807 | commit b93775c2036b99baa390ea425c4771895bbc63c4 |
| 8808 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8809 | Date: Tue Aug 22 18:26:08 2006 -0500 |
| 887e2ec9 | 8810 | |
| 7c52c4b9 | 8811 | Cleanup even more poorly introduced whitespace. |
| 0dab03ba | 8812 | |
| 7c52c4b9 WD |
8813 | commit ae6241685cbcf0c79a3636530d2ceab1fb291a94 |
| 8814 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8815 | Date: Tue Aug 22 18:07:00 2006 -0500 |
| f60ba0d3 | 8816 | |
| 7c52c4b9 | 8817 | Cleanup more poorly introduced whitespace. |
| f9328639 | 8818 | |
| 7c52c4b9 WD |
8819 | commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57 |
| 8820 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8821 | Date: Tue Aug 22 17:54:05 2006 -0500 |
| f9328639 | 8822 | |
| 7c52c4b9 | 8823 | Cleanup poorly introduced whitespace. |
| 24d3d375 | 8824 | |
| 7c52c4b9 WD |
8825 | commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3 |
| 8826 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8827 | Date: Tue Aug 22 12:25:27 2006 -0500 |
| 6608043f | 8828 | |
| 7c52c4b9 | 8829 | General indent and whitespace cleanups. |
| 4c15ef55 | 8830 | |
| 7c52c4b9 WD |
8831 | commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f |
| 8832 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8833 | Date: Tue Aug 22 12:06:18 2006 -0500 |
| 360b4103 | 8834 | |
| 7c52c4b9 | 8835 | General indent and whitespace cleanups. |
| 2c051651 | 8836 | |
| 7c52c4b9 WD |
8837 | commit 41a0e8b304d3ff55fe27a230507aac79684016ac |
| 8838 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8839 | Date: Tue Aug 22 10:42:21 2006 -0500 |
| 2c051651 | 8840 | |
| 7c52c4b9 | 8841 | Cleanup compiler warnings. |
| 2c051651 | 8842 | |
| 7c52c4b9 WD |
8843 | commit 5de62c47a8628b3da4d73f7c07027f32a3342d40 |
| 8844 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8845 | Date: Tue Aug 22 09:31:59 2006 -0500 |
| 2c051651 | 8846 | |
| 7c52c4b9 | 8847 | Fix disable_of booting |
| b985b5d6 | 8848 | |
| 7c52c4b9 | 8849 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
| 7d0432c9 | 8850 | |
| 7c52c4b9 WD |
8851 | commit 87a449c8ac396420cb24260f717ea9e6faa82047 |
| 8852 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8853 | Date: Tue Aug 22 09:23:55 2006 -0500 |
| e8143e72 | 8854 | |
| 7c52c4b9 | 8855 | Support for FDT in uImage format, error when using FDT from flash |
| b985b5d6 | 8856 | |
| 7c52c4b9 | 8857 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
| 0fd30252 | 8858 | |
| 7c52c4b9 WD |
8859 | commit 75c299c38369d01addd5e054b8a16217b70f4a86 |
| 8860 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 8861 | Date: Tue Aug 15 15:12:55 2006 -0400 |
| 2b393b0f | 8862 | |
| 7c52c4b9 | 8863 | Unlock cache before kernel starts up for MPC86xx |
| f5577aae | 8864 | |
| 7c52c4b9 WD |
8865 | commit 67256678f00c09b0a7f19e862e5c1847553d31bc |
| 8866 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 8867 | Date: Tue Aug 15 15:13:15 2006 -0400 |
| 21a9cc02 | 8868 | |
| 7c52c4b9 | 8869 | Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| 16850919 | 8870 | |
| 7c52c4b9 WD |
8871 | commit 1c8f6d8fb028f156094d05f2d14298e6479364ac |
| 8872 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 8873 | Date: Tue Aug 15 15:12:55 2006 -0400 |
| 113f64e0 | 8874 | |
| 7c52c4b9 | 8875 | Unlock cache before kernel starts up for MPC86xx |
| ddde6b7c | 8876 | |
| 7c52c4b9 WD |
8877 | commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04 |
| 8878 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 8879 | Date: Tue Aug 15 15:13:15 2006 -0400 |
| ed1cf845 | 8880 | |
| 7c52c4b9 | 8881 | Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR |
| 6d3bc9b8 | 8882 | |
| 7c52c4b9 WD |
8883 | commit 86c8e17f25e972a7e272950a0735fad84e082b88 |
| 8884 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8885 | Date: Wed Aug 16 13:59:47 2006 -0500 |
| 6fe16a87 | 8886 | |
| 7c52c4b9 | 8887 | * Fix disable_of booting |
| b985b5d6 | 8888 | |
| 7c52c4b9 | 8889 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
| 94568b60 | 8890 | |
| 7c52c4b9 WD |
8891 | commit 25c751e9adc86e22fe3b5b47cf2806379b575db7 |
| 8892 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8893 | Date: Wed Aug 16 10:54:09 2006 -0500 |
| 2f6fa46d | 8894 | |
| 7c52c4b9 | 8895 | * Support for FDT in uImage format, error when using FDT from flash |
| b985b5d6 | 8896 | |
| 7c52c4b9 | 8897 | Signed-off-by: Matthew McClintock <msm@freescale.com> |
| ddd5d9da | 8898 | |
| 8d9a8610 WD |
8899 | commit 899620c2d66d4eef3b2a0034d062e71d45d886c9 |
| 8900 | Author: Stefan Roese <sr@denx.de> | |
| 8901 | Date: Tue Aug 15 14:22:35 2006 +0200 | |
| 8902 | ||
| 8903 | Add initial support for the ALPR board from Prodrive | |
| 8904 | NAND needs some additional testing | |
| 8905 | Patch by Heiko Schocher, 15 Aug 2006 | |
| 8906 | ||
| 8907 | commit f0ff4692ff3372dec55074a8eb444943ab095abb | |
| 8908 | Author: Stefan Roese <sr@denx.de> | |
| 8909 | Date: Tue Aug 15 14:15:51 2006 +0200 | |
| 8910 | ||
| 8911 | Add FPGA Altera Cyclone 2 support | |
| 8912 | Patch by Heiko Schocher, 15 Aug 2006 | |
| 8913 | ||
| 7c52c4b9 WD |
8914 | commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b |
| 8915 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8916 | Date: Mon Aug 14 15:33:38 2006 -0500 |
| 80f0c0f5 | 8917 | |
| 7c52c4b9 | 8918 | Fix BAT0 to actually be cacheable, non-guarded as documented. |
| b985b5d6 | 8919 | |
| 7c52c4b9 | 8920 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| d689e346 | 8921 | |
| 7c52c4b9 WD |
8922 | commit 40bc83559db5745681909fd7382ae509567e116d |
| 8923 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 8924 | Date: Wed Aug 9 15:32:16 2006 -0500 |
| 0a0f3a46 | 8925 | |
| 7c52c4b9 WD |
8926 | Removed MPC8641HPCN DTS source file from build. |
| 8927 | It is no longer linked into U-Boot; its sources are | |
| 8928 | now located in the kernel tree. | |
| b985b5d6 | 8929 | |
| 7c52c4b9 | 8930 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 6183bb9e | 8931 | |
| 7c52c4b9 WD |
8932 | commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb |
| 8933 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8934 | Date: Wed Jun 28 10:47:03 2006 -0500 |
| 463764c8 | 8935 | |
| 7c52c4b9 | 8936 | * Switched default PCI speed for 8540 ADS back to 33MHz |
| b985b5d6 | 8937 | |
| 7c52c4b9 WD |
8938 | * Added comments and a printf to warn that PCI-X won't |
| 8939 | work at 33MHz | |
| 8940 | Patch by Andy Fleming 17-Mar-2006 | |
| b985b5d6 | 8941 | |
| 7c52c4b9 | 8942 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| d8f961bb | 8943 | |
| 7c52c4b9 WD |
8944 | commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39 |
| 8945 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8946 | Date: Wed Jun 28 10:46:35 2006 -0500 |
| 4f92ed5f | 8947 | |
| 7c52c4b9 | 8948 | * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006 |
| b985b5d6 | 8949 | |
| 7c52c4b9 | 8950 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 9ede3cc5 | 8951 | |
| 7c52c4b9 WD |
8952 | commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452 |
| 8953 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8954 | Date: Wed Jun 28 10:46:13 2006 -0500 |
| e335496a | 8955 | |
| 7c52c4b9 | 8956 | * Added VIA configuration table |
| b985b5d6 | 8957 | |
| 7c52c4b9 WD |
8958 | * Added support for PCI2 on CDS |
| 8959 | Patch by Andy Fleming 17-Mar-2006 | |
| b985b5d6 | 8960 | |
| 7c52c4b9 | 8961 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 36b904a7 | 8962 | |
| 7c52c4b9 WD |
8963 | commit c88f9fe66b64247e5b6a38410ba315ca25596d16 |
| 8964 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8965 | Date: Wed Jun 28 10:45:41 2006 -0500 |
| d8519dc7 | 8966 | |
| 7c52c4b9 | 8967 | * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006 |
| b985b5d6 | 8968 | |
| 7c52c4b9 | 8969 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 015c200b | 8970 | |
| 7c52c4b9 WD |
8971 | commit 97074ed9655309b64231bc2cee69fe85399f8055 |
| 8972 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8973 | Date: Wed Jun 28 10:45:17 2006 -0500 |
| 692519b1 | 8974 | |
| 7c52c4b9 | 8975 | * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006 |
| b985b5d6 | 8976 | |
| 7c52c4b9 | 8977 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| a3d9181e | 8978 | |
| 7c52c4b9 WD |
8979 | commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2 |
| 8980 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8981 | Date: Wed Jun 28 10:44:49 2006 -0500 |
| e51aae38 | 8982 | |
| 7c52c4b9 | 8983 | * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006 |
| b985b5d6 | 8984 | |
| 7c52c4b9 | 8985 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 6587f7e1 | 8986 | |
| 7c52c4b9 WD |
8987 | commit a4e11558b810ef2cddffdf7b9d86bc1130441960 |
| 8988 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8989 | Date: Wed Jun 28 10:44:23 2006 -0500 |
| a2c95a72 | 8990 | |
| 7c52c4b9 | 8991 | * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006 |
| b985b5d6 | 8992 | |
| 7c52c4b9 | 8993 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 193dd958 | 8994 | |
| 7c52c4b9 WD |
8995 | commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b |
| 8996 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 8997 | Date: Wed Jun 28 10:43:36 2006 -0500 |
| 7c52c4b9 WD |
8998 | |
| 8999 | * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006 | |
| b985b5d6 | 9000 | |
| 7c52c4b9 WD |
9001 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 9002 | ||
| 9003 | commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4 | |
| 9004 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9005 | Date: Wed Jun 28 10:43:00 2006 -0500 |
| 7c52c4b9 WD |
9006 | |
| 9007 | * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006 | |
| 9008 | ||
| 9009 | commit 5498d90312aad9f6bdbf047986027c35b03cd163 | |
| 9010 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9011 | Date: Wed Jun 28 10:42:24 2006 -0500 |
| 7c52c4b9 WD |
9012 | |
| 9013 | * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006 | |
| 9014 | ||
| 9015 | commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe | |
| 9016 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9017 | Date: Wed Jun 28 10:41:37 2006 -0500 |
| 7c52c4b9 WD |
9018 | |
| 9019 | * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006 | |
| 9020 | ||
| 9021 | commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a | |
| 9022 | Author: John Traill <john.traill@freescale.com> | |
| 2b2a40be | 9023 | Date: Wed Aug 9 14:33:50 2006 +0100 |
| 7c52c4b9 WD |
9024 | |
| 9025 | Add Rapidio support for the MPC8641HPCN | |
| b985b5d6 | 9026 | |
| 7c52c4b9 WD |
9027 | Signed-off-by: John Traill <john.traill@freescale.com> |
| 9028 | ||
| 9029 | commit 91a414c7d1fb0eac912592cd995b30c9f23045c9 | |
| 9030 | Author: John Traill <john.traill@freescale.com> | |
| 2b2a40be | 9031 | Date: Tue Aug 8 11:32:43 2006 +0100 |
| 7c52c4b9 WD |
9032 | |
| 9033 | Fix caslat calculation | |
| b985b5d6 | 9034 | |
| 7c52c4b9 WD |
9035 | Signed-off-by: John Traill <john.traill@freescale.com> |
| 9036 | ||
| 9037 | commit 709d3073e74153278e7904a70819bbef7df50e1a | |
| 9038 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9039 | Date: Thu Aug 3 16:17:56 2006 -0500 |
| 7c52c4b9 WD |
9040 | |
| 9041 | Convert to mac-address in ethernet nodes. | |
| 9042 | ||
| 9043 | commit 71748af833ca1017edf1415be376366ff2937d17 | |
| 9044 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 9045 | Date: Fri Jul 28 12:41:35 2006 -0400 |
| 7c52c4b9 WD |
9046 | |
| 9047 | Correct the irq value of DUART2 | |
| 9048 | ||
| 9049 | commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c | |
| 9050 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 9051 | Date: Fri Jul 28 12:41:41 2006 -0400 |
| 7c52c4b9 WD |
9052 | |
| 9053 | Change the space size of PEX IO in README | |
| 9054 | ||
| 9055 | commit 239db37c94f7a92941c4465feceb867c609241c5 | |
| 9056 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 9057 | Date: Fri Jul 28 12:41:18 2006 -0400 |
| 7c52c4b9 WD |
9058 | |
| 9059 | Move get_board_sys_clk to board directory | |
| 9060 | ||
| 9061 | commit 492900b985439fbce1a118afde1e35def870db03 | |
| 9062 | Author: John Traill <john.traill@freescale.com> | |
| 2b2a40be | 9063 | Date: Fri Jul 28 09:03:54 2006 +0100 |
| 7c52c4b9 WD |
9064 | |
| 9065 | Fix 8641HPCN pollution | |
| 9066 | ||
| 9067 | commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2 | |
| 9068 | Author: John Traill <john.traill@freescale.com> | |
| 2b2a40be | 9069 | Date: Fri Jul 28 08:16:06 2006 +0100 |
| 7c52c4b9 WD |
9070 | |
| 9071 | Fix 8641HPCN timebase | |
| 9072 | ||
| 9073 | commit c86360b830f1eecd7a72208575dde4f57879faea | |
| 9074 | Author: Zhang Wei <wei.zhang@freescale.com> | |
| 2b2a40be | 9075 | Date: Fri Jul 28 00:01:34 2006 +0800 |
| 7c52c4b9 WD |
9076 | |
| 9077 | Fixed OF device tree of mpc86xxhpcn board. | |
| b985b5d6 | 9078 | |
| 7c52c4b9 | 9079 | The changes works in with kernel irq mapping rework. |
| b985b5d6 | 9080 | |
| 7c52c4b9 WD |
9081 | Signed-off-by: Zhang Wei <wei.zhang@freescale.com> |
| 9082 | ||
| 9083 | commit bea3f28d285942bf3f7ab339ce85178ded544225 | |
| 9084 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 9085 | Date: Wed Jul 12 10:48:05 2006 -0400 |
| 7c52c4b9 WD |
9086 | |
| 9087 | Add support for reading and writing mac addresses to or from ID EEPROM. | |
| b985b5d6 | 9088 | |
| 7c52c4b9 WD |
9089 | Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). |
| 9090 | With attached patch, we can use command "mac/mac read/mac save/" | |
| 9091 | to read and write EEPROM under u-boot prompt. | |
| b985b5d6 | 9092 | |
| 7c52c4b9 WD |
9093 | U-boot will calculate the checksum of EEPROM while bootup, |
| 9094 | if it is right, then u-boot will check whether the mac address | |
| 9095 | of eTSEC0/1/2/3 is availalbe (non-zero). | |
| b985b5d6 | 9096 | |
| 7c52c4b9 WD |
9097 | If there is mac address availabe in EEPROM, u-boot will use it, |
| 9098 | otherewise, u-boot will use the mac address defined in | |
| 9099 | MPC8641HPCN.h. This matches the requirement to set unique mac address | |
| 9100 | for each TSEC port. | |
| b985b5d6 | 9101 | |
| 7c52c4b9 WD |
9102 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| 9103 | Signed-off-by: York Sun <yorksun@freescale.com> | |
| 9104 | ||
| 9105 | commit fcb28e763415e0e4e66b0f45842d1557ae198e5e | |
| 9106 | Author: Jin Zhengxiong <Jason.Jin@freescale.com> | |
| 2b2a40be | 9107 | Date: Thu Jul 13 10:35:10 2006 -0500 |
| 7c52c4b9 WD |
9108 | |
| 9109 | Fixed initrd issue by define big RAM | |
| b985b5d6 | 9110 | |
| 7c52c4b9 WD |
9111 | Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| 9112 | ||
| 9113 | commit e6cd2a1785d74ec3d30a86f1cb360be8de478151 | |
| 9114 | Author: Jason Jin <Jason.jin@freescale.com> | |
| 2b2a40be | 9115 | Date: Fri Jul 7 10:01:45 2006 -0500 |
| 7c52c4b9 WD |
9116 | |
| 9117 | We made a u-boot patch to fix the hang up issue | |
| 9118 | when booting filesystem from ramdisk. | |
| b985b5d6 | 9119 | |
| 7c52c4b9 WD |
9120 | Signed-off-by:Jason Jin <Jason.jin@freescale.com> |
| 9121 | ||
| 9122 | commit 38433ccc5850ee70549af0b2bc5b920355ef5388 | |
| 9123 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9124 | Date: Wed Jun 28 10:47:03 2006 -0500 |
| 7c52c4b9 WD |
9125 | |
| 9126 | * Switched default PCI speed for 8540 ADS back to 33MHz | |
| 9127 | * Added comments and a printf to warn that PCI-X won't | |
| 9128 | work at 33MHz | |
| 9129 | Patch by Andy Fleming 17-Mar-2006 | |
| b985b5d6 | 9130 | |
| 7c52c4b9 WD |
9131 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 9132 | ||
| 9133 | commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19 | |
| 9134 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9135 | Date: Wed Jun 28 10:46:35 2006 -0500 |
| 7c52c4b9 WD |
9136 | |
| 9137 | * Fixed a bug where 8555 PCI code used the old variable and | |
| 9138 | function names | |
| 9139 | Patch by Andy Fleming 17-Mar-2006 | |
| b985b5d6 | 9140 | |
| 7c52c4b9 WD |
9141 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 9142 | ||
| 9143 | commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac | |
| 9144 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9145 | Date: Wed Jun 28 10:46:13 2006 -0500 |
| 7c52c4b9 WD |
9146 | |
| 9147 | * Added VIA configuration table | |
| 9148 | * Added support for PCI2 on CDS | |
| 9149 | Patch by Andy Fleming 17-Mar-2006 | |
| b985b5d6 | 9150 | |
| 7c52c4b9 WD |
9151 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 9152 | ||
| 9153 | commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc | |
| 9154 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9155 | Date: Wed Jun 28 10:45:41 2006 -0500 |
| 7c52c4b9 WD |
9156 | |
| 9157 | * Fixed PCI memory definitions | |
| 9158 | Patch by Andy Fleming 17-Mar-2006 | |
| b985b5d6 | 9159 | |
| 7c52c4b9 WD |
9160 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 9161 | ||
| 9162 | commit 087454609e47295443af793a282cddcd91a5f49c | |
| 9163 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9164 | Date: Wed Jun 28 10:45:17 2006 -0500 |
| 7c52c4b9 WD |
9165 | |
| 9166 | * Added support for initializing second PCI bus on 85xx | |
| 9167 | Patch by Andy Fleming 17-Mar-2006 | |
| b985b5d6 | 9168 | |
| 7c52c4b9 WD |
9169 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 9170 | ||
| 9171 | commit b636aaeb6fd516a442fb611bbeeddf3077a687fb | |
| 9172 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9173 | Date: Wed Jun 28 10:44:49 2006 -0500 |
| 7c52c4b9 WD |
9174 | |
| 9175 | * Added PCI-X #defines for PCI-X initialization | |
| 9176 | Patch by Andy Fleming on 17-Mar-2006 | |
| b985b5d6 | 9177 | |
| 7c52c4b9 WD |
9178 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 9179 | ||
| 9180 | commit 20abbc6fffa115690107cc942c7abf84bdc03a1b | |
| 9181 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9182 | Date: Wed Jun 28 10:44:23 2006 -0500 |
| 7c52c4b9 WD |
9183 | |
| 9184 | * Made sure the code which disables prefetch for PCI devices | |
| 9185 | sets the size of the prefetch region to 0 | |
| 9186 | Patch by Andy Fleming on 17-Mar-2006 | |
| b985b5d6 | 9187 | |
| 7c52c4b9 WD |
9188 | Signed-off-by: Andy Fleming <afleming@freescale.com> |
| 9189 | ||
| 9190 | commit 40d5fa35d02df22580593bf0039ab173367e8ef0 | |
| 9191 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9192 | Date: Wed Jun 28 10:43:36 2006 -0500 |
| 7c52c4b9 WD |
9193 | |
| 9194 | * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards | |
| 9195 | Patch by Jon Loeliger 17-Jan-2006 | |
| b985b5d6 | 9196 | |
| 7c52c4b9 WD |
9197 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 9198 | ||
| 9199 | commit be7e8b0cb5a0c49dc180075b96df296a893bf146 | |
| 9200 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9201 | Date: Wed Jun 28 10:43:00 2006 -0500 |
| 7c52c4b9 WD |
9202 | |
| 9203 | * Removed the oftree.dts for stxxtx in light of the changes | |
| 9204 | to the flat device tree handling code | |
| 9205 | Patch by Matthew McClintock 26-June-2006 | |
| 9206 | ||
| 9207 | commit 1b380ec225665e73959677f3893dc658c5925e05 | |
| 9208 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9209 | Date: Wed Jun 28 10:42:24 2006 -0500 |
| 7c52c4b9 WD |
9210 | |
| 9211 | * Patch to modify ft_build.c to update flat device trees in place | |
| 9212 | Patch by Matthew McClintock 26-June-2006 | |
| 9213 | ||
| 9214 | commit 98a9c4d468a942a09ebe8979bec508017f3e4462 | |
| 9215 | Author: Matthew McClintock <msm@freescale.com> | |
| 2b2a40be | 9216 | Date: Wed Jun 28 10:41:37 2006 -0500 |
| 7c52c4b9 WD |
9217 | |
| 9218 | * Modify bootm command to support booting with flat device trees | |
| 9219 | Patch by Matthew McClintock 26-June-2006 | |
| 9220 | ||
| 9221 | commit da012ab661fd4ab169dd7b9b32201a4df62cf34a | |
| 9222 | Author: Jin Zhengxiong <Jason.Jin@freescale.com> | |
| 2b2a40be | 9223 | Date: Wed Jun 28 08:43:56 2006 -0500 |
| 7c52c4b9 WD |
9224 | |
| 9225 | Change Id to symbolic name for RTL8139 | |
| b985b5d6 | 9226 | |
| 7c52c4b9 WD |
9227 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 9228 | ||
| 9229 | commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0 | |
| 9230 | Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> | |
| 2b2a40be | 9231 | Date: Tue Jun 27 18:12:10 2006 +0800 |
| 7c52c4b9 WD |
9232 | |
| 9233 | Fix RTL8139 in big endian | |
| b985b5d6 | 9234 | |
| 7c52c4b9 WD |
9235 | signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| 9236 | signed-off-by: Wei Zhang <wei.zhang@freescale.com> | |
| 9237 | ||
| 9238 | commit fcfb9a57947fc203b99fe81ab0578f7286261f9f | |
| 9239 | Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> | |
| 2b2a40be | 9240 | Date: Tue Jun 27 18:12:23 2006 +0800 |
| 7c52c4b9 WD |
9241 | |
| 9242 | Fix Tsec bug when no link | |
| b985b5d6 | 9243 | |
| 7c52c4b9 WD |
9244 | When tftp a non-exist file from the tftp server, u-boot will check |
| 9245 | the link of all eth port. The original file will return wrong link | |
| 9246 | state on the no link ports. | |
| b985b5d6 | 9247 | |
| 7c52c4b9 WD |
9248 | signed-off-by: Jason Jin <Jason.Jin@freescale.com> |
| 9249 | ||
| 9250 | commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2 | |
| 9251 | Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> | |
| 2b2a40be | 9252 | Date: Tue Jun 27 18:12:02 2006 +0800 |
| 7c52c4b9 WD |
9253 | |
| 9254 | Fix bug for io_bar size during pci scan | |
| b985b5d6 | 9255 | |
| 7c52c4b9 WD |
9256 | During the pci scan process, Some devices return bar_reponse with the |
| 9257 | highest bytes 0, such as the pci bridge in uli1575 return bar_response | |
| 9258 | with 0xffffff, So the bar_size should be manually set under 64K. | |
| b985b5d6 | 9259 | |
| 7c52c4b9 WD |
9260 | Signed-off-by: Jason Jin <jason.jin@freescale.com> |
| 9261 | ||
| 9262 | commit fa7db9c377bc2353a17bf1d381d65a6c418728f0 | |
| 9263 | Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> | |
| 2b2a40be | 9264 | Date: Tue Jun 27 18:11:54 2006 +0800 |
| 7c52c4b9 WD |
9265 | |
| 9266 | Enable PCIE1 for MPC8641HPCN board | |
| b985b5d6 | 9267 | |
| 7c52c4b9 WD |
9268 | Signed-off-by: Jason Jin <Jason.jin@freescale.com> |
| 9269 | ||
| 9986bc3e WD |
9270 | commit 99d70e3a47affb9bae041a2caece7cd516e213b3 |
| 9271 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 9272 | Date: Mon Jun 26 11:06:00 2006 +0200 | |
| 9273 | ||
| 9274 | More code cleanup | |
| 9275 | ||
| 7c52c4b9 WD |
9276 | commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba |
| 9277 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9278 | Date: Thu Jun 22 08:51:46 2006 -0500 |
| 7c52c4b9 WD |
9279 | |
| 9280 | Fix bug in 8641hpcn reset command with no args. | |
| b985b5d6 | 9281 | |
| 7c52c4b9 WD |
9282 | Signed-off-by: Haiying Wang <haiying.wang@freescale.com> |
| 9283 | Acked-by: Jon Loeliger <jdl@freescale.com> | |
| 9284 | ||
| 9285 | commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc | |
| 9286 | Author: Zhang Wei <wei.zhang@freescale.com> | |
| 2b2a40be | 9287 | Date: Tue Jun 20 17:47:15 2006 +0800 |
| 7c52c4b9 WD |
9288 | |
| 9289 | Reworked IRQ mapping in OF-tree. | |
| 9290 | ||
| 9291 | commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c | |
| 9292 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9293 | Date: Thu Jun 15 21:33:37 2006 -0500 |
| 7c52c4b9 WD |
9294 | |
| 9295 | Do not enable address translation on secondary CPUs. | |
| 9296 | Do not set up BATs on secondary CPUs. Let Linux do the nasty. | |
| b985b5d6 | 9297 | |
| 7c52c4b9 WD |
9298 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 9299 | ||
| 9986bc3e WD |
9300 | commit 386eda022473394ad8f36b86f2bdc9b4cb816291 |
| 9301 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 9302 | Date: Wed Jun 14 18:14:56 2006 +0200 | |
| 9303 | ||
| 9304 | Code cleanup | |
| 9305 | ||
| 9306 | commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70 | |
| 9307 | Author: Wolfgang Denk <wd@pollux.denx.de> | |
| 9308 | Date: Wed Jun 14 17:45:53 2006 +0200 | |
| 9309 | ||
| 9310 | Various USB related patches | |
| 9311 | - Add support for mpc8xx USB device. | |
| 9312 | - Add support for Common Device Class - Abstract Control Model USB console. | |
| 9313 | - Add support for flow control in USB slave devices. | |
| 9314 | - Add support for switching between gserial and cdc_acm using environment. | |
| 9315 | - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h | |
| 9316 | - Update usbcore slightly to ease host enumeration. | |
| 9317 | - Fix non-portable endian problems in usbdcore and usbdcore_ep0. | |
| 9318 | - Add AdderUSB_config as a defconfig to enable usage of the USB console | |
| 9319 | by default with the Adder87x U-Boot port. | |
| 9320 | Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006 | |
| 9321 | ||
| 7c52c4b9 WD |
9322 | commit 8ecc971618f56029ad99d3516f8b297a6ed58971 |
| 9323 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9324 | Date: Wed Jun 7 10:53:55 2006 -0500 |
| 7c52c4b9 WD |
9325 | |
| 9326 | Fix a get_board_sys_clk() use-before-def warning. | |
| b985b5d6 | 9327 | |
| 7c52c4b9 WD |
9328 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| 9329 | ||
| 9330 | commit d9bf4858fca5aa4d651b283270f77da72ebadfd5 | |
| 9331 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9332 | Date: Wed Jun 7 10:52:49 2006 -0500 |
| 7c52c4b9 WD |
9333 | |
| 9334 | Allow DTC path to be passed in. | |
| b985b5d6 | 9335 | |
| 7c52c4b9 WD |
9336 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| 9337 | ||
| 9338 | commit c83ae9ea6d93abbe751bf8a3396236a084e56f87 | |
| 9339 | Author: Haiying Wang <haiying.wang@freescale.com> | |
| 2b2a40be | 9340 | Date: Tue Jun 6 16:54:29 2006 -0400 |
| 7c52c4b9 WD |
9341 | |
| 9342 | Modify the IRQ of DUART2 | |
| 9343 | ||
| 9344 | commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e | |
| 9345 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9346 | Date: Wed May 31 13:55:35 2006 -0500 |
| 7c52c4b9 WD |
9347 | |
| 9348 | Review cleanups. | |
| b985b5d6 | 9349 | |
| 7c52c4b9 WD |
9350 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 9351 | ||
| 9352 | commit cb5965fb95b77a49f4e6af95248e0c849f4af03e | |
| 9353 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9354 | Date: Wed May 31 12:44:44 2006 -0500 |
| 7c52c4b9 WD |
9355 | |
| 9356 | White space cleanup. | |
| 9357 | Some 80-column cleanups. | |
| 9358 | Convert printf() to puts() where possible. | |
| 9359 | Use #include "spd_sdram.h" as needed. | |
| 9360 | Enhanced reset command usage message a bit. | |
| b985b5d6 | 9361 | |
| 7c52c4b9 WD |
9362 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 9363 | ||
| 9364 | commit 3d5c5be547445dd3bd2eb7368d80df03ea437970 | |
| 9365 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9366 | Date: Wed May 31 11:39:34 2006 -0500 |
| 7c52c4b9 WD |
9367 | |
| 9368 | Removed unneeded local_bus_init() from 8641HPCN board. | |
| b985b5d6 | 9369 | |
| 7c52c4b9 WD |
9370 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 9371 | ||
| 9372 | commit 4d3d729c16c392d2982d3266b659d333c927697d | |
| 9373 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9374 | Date: Wed May 31 11:24:28 2006 -0500 |
| 7c52c4b9 WD |
9375 | |
| 9376 | Moved mpc8641hpcn_board_reset() out of cpu/ into board/. | |
| b985b5d6 | 9377 | |
| 7c52c4b9 WD |
9378 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 9379 | ||
| 9380 | commit b2a941de060350ad15878d8219825f4950e9bb8e | |
| 9381 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9382 | Date: Wed May 31 10:07:28 2006 -0500 |
| 7c52c4b9 WD |
9383 | |
| 9384 | Remove dead debug code. | |
| b985b5d6 | 9385 | |
| 7c52c4b9 WD |
9386 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| 9387 | ||
| 9388 | commit 126aa70f10ba3d20e0a6f4d32328250513b77770 | |
| 9389 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9390 | Date: Tue May 30 17:47:00 2006 -0500 |
| 7c52c4b9 WD |
9391 | |
| 9392 | Move mpc86xx PIXIS code to board directory | |
| b985b5d6 | 9393 | |
| 7c52c4b9 WD |
9394 | First cut at moving the PIXIS platform code out of |
| 9395 | the 86xx cpu directory and into board/mpc8641hpcn | |
| 9396 | where it belongs. | |
| b985b5d6 | 9397 | |
| 7c52c4b9 | 9398 | Signed-off-by: Jon Loeliger <jdl@freescale.com> |
| 3ca9122f | 9399 | |
| 9986bc3e WD |
9400 | commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9 |
| 9401 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 9402 | Date: Tue May 30 16:56:14 2006 +0200 | |
| 9403 | ||
| 9404 | Support generic OHCI support for the s3c24x0 cpu. | |
| 9405 | ||
| 7c52c4b9 WD |
9406 | commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8 |
| 9407 | Author: Haiying Wang <Haiying.Wang@freescale.com> | |
| 2b2a40be | 9408 | Date: Tue May 30 09:10:32 2006 -0500 |
| 4c4aca81 | 9409 | |
| 7c52c4b9 | 9410 | Improve "reset" command's interaction with watchdog. |
| b985b5d6 | 9411 | |
| 2b2a40be WD |
9412 | "reset altbank" will reset another bank WITHOUT watch dog timer enabled |
| 9413 | "reset altbank wd" will reset another bank WITH watch dog enabled | |
| 9414 | "diswd" will disable watch dog after u-boot boots up successfully | |
| b985b5d6 | 9415 | |
| 7c52c4b9 WD |
9416 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| 9417 | ||
| 9418 | commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a | |
| 9419 | Author: Haiying Wang <Haiying.Wang@freescale.com> | |
| 2b2a40be | 9420 | Date: Tue May 30 08:51:19 2006 -0500 |
| 7c52c4b9 WD |
9421 | |
| 9422 | Fix two SDRAM setup bugs. | |
| b985b5d6 | 9423 | |
| 2b2a40be WD |
9424 | Fix ECC setup bug. |
| 9425 | Enable 1T/2T based on number of DIMMs present. | |
| b985b5d6 | 9426 | |
| 7c52c4b9 WD |
9427 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| 9428 | ||
| 9429 | commit d11fec5015334deb2010e36ce00bb118cc5429a5 | |
| 9430 | Author: Haiying Wang <Haiying.Wang@freescale.com> | |
| 2b2a40be | 9431 | Date: Fri May 26 10:24:48 2006 -0500 |
| 7c52c4b9 WD |
9432 | |
| 9433 | Add first draft of the MPC8641HPCN doc/README. | |
| b985b5d6 | 9434 | |
| 7c52c4b9 WD |
9435 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| 9436 | ||
| 9437 | commit ed45d6c930b5939718a87ee12e25cf9a05978d4a | |
| 9438 | Author: Haiying Wang <Haiying.Wang@freescale.com> | |
| 2b2a40be | 9439 | Date: Fri May 26 10:13:04 2006 -0500 |
| 7c52c4b9 WD |
9440 | |
| 9441 | Added pci@8000 block. | |
| 9442 | Updated ethernet interrupt mappings (moved up 48). | |
| 9443 | Cleaned up a few comments. | |
| b985b5d6 | 9444 | |
| 7c52c4b9 WD |
9445 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| 9446 | ||
| 9447 | commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7 | |
| 9448 | Author: Haiying Wang <Haiying.Wang@freescale.com> | |
| 2b2a40be | 9449 | Date: Fri May 26 10:01:16 2006 -0500 |
| 7c52c4b9 WD |
9450 | |
| 9451 | Allow args on reset command. | |
| b985b5d6 | 9452 | |
| 7c52c4b9 WD |
9453 | Signed-off-by: Jon Loeliger <jdl@jdl.com> |
| 9454 | ||
| 9986bc3e WD |
9455 | commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc |
| 9456 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 9457 | Date: Tue May 23 13:38:35 2006 +0200 | |
| 9458 | ||
| 9459 | Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some | |
| 9460 | fixes to the latter. | |
| 9461 | ||
| 9462 | commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9 | |
| 9463 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 9464 | Date: Tue May 23 10:33:11 2006 +0200 | |
| 9465 | ||
| 9466 | More cleanup for the delta board and the generic usb_ohci driver. Added | |
| 9467 | CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific | |
| 9468 | initialization and cleanup hooks respectively. | |
| 9469 | ||
| 9470 | commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10 | |
| 9471 | Author: Markus Klotzbuecher <mk@denx.de> | |
| 9472 | Date: Mon May 22 16:33:54 2006 +0200 | |
| 9473 | ||
| 9474 | This patch adds USB storage support for the delta board. This is the first | |
| 9475 | board to make use of a generic OHCI driver, that calls hooks for board | |
| 9476 | dependant initialization. | |
| 9477 | ||
| 7c52c4b9 WD |
9478 | commit 14e37081ff3cac7ebe6e93836523429853b6b292 |
| 9479 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9480 | Date: Fri May 19 13:28:39 2006 -0500 |
| 7c52c4b9 WD |
9481 | |
| 9482 | Change arbitration to round-robin for SMP linux. | |
| 9483 | ||
| 9484 | commit 9a655876e5995be80f49054e2509500e871e4d3a | |
| 9485 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9486 | Date: Fri May 19 13:26:34 2006 -0500 |
| 7c52c4b9 WD |
9487 | |
| 9488 | Enable dual DDR controllers and interleaving. | |
| 9489 | ||
| 9490 | commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c | |
| 9491 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9492 | Date: Fri May 19 13:22:44 2006 -0500 |
| 7c52c4b9 WD |
9493 | |
| 9494 | Update 86xx address map and LAWBARs. | |
| 4819fad9 | 9495 | |
| 7c52c4b9 WD |
9496 | commit cccce5d0581bb0ba4602799a4b5112e58d1579cb |
| 9497 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9498 | Date: Fri May 19 13:14:15 2006 -0500 |
| fd27996d | 9499 | |
| 7c52c4b9 WD |
9500 | Remove L2 Cache invalidate polling. |
| 9501 | ||
| 9502 | commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8 | |
| 9503 | Author: Jon Loeliger <jdl@jdl.com> | |
| 2b2a40be | 9504 | Date: Fri May 19 12:33:09 2006 -0500 |
| 7c52c4b9 WD |
9505 | |
| 9506 | Enable 2nd CPU and I2C. | |
| 135ae006 | 9507 | |
| 7c52c4b9 WD |
9508 | commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54 |
| 9509 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9510 | Date: Mon May 15 07:26:56 2006 -0500 |
| 966083e9 | 9511 | |
| 7c52c4b9 WD |
9512 | Update interrupt mapping. |
| 9513 | ||
| 9514 | commit 6cfea33477b04b63ed47386ed1629529484c33ba | |
| 9515 | Author: Haiying Wang <Haiying.Wang@freescale.com> | |
| 2b2a40be | 9516 | Date: Wed May 10 09:38:06 2006 -0500 |
| 7c52c4b9 WD |
9517 | |
| 9518 | Remove unneeded INIT_RAM_LOCK cache twiddling. | |
| 9519 | Correctly tracks r29 as global data pointer now. | |
| b985b5d6 | 9520 | |
| 7c52c4b9 WD |
9521 | Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> |
| 9522 | ||
| 9523 | commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c | |
| 9524 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9525 | Date: Wed May 10 09:33:07 2006 -0500 |
| 144f7795 | 9526 | |
| 7c52c4b9 | 9527 | Remove unnecessary flash.c file. |
| b9365a26 | 9528 | |
| 7c52c4b9 WD |
9529 | commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8 |
| 9530 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9531 | Date: Tue May 9 08:23:49 2006 -0500 |
| 87a5c73d | 9532 | |
| 7c52c4b9 | 9533 | Get MPC8641HPCN flash images working. |
| b985b5d6 | 9534 | |
| 2b2a40be WD |
9535 | Enable the CFI driver. |
| 9536 | Remove bogus LAWBAR7 cruft. | |
| 9537 | Use correct TEXT_BASE, Fixup load script. | |
| 9538 | Enable SPD EEPROM during DDR setup. | |
| 9539 | Use generic RFC 1918 IP addresses by default. | |
| 029b6dc7 | 9540 | |
| 7c52c4b9 WD |
9541 | commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca |
| 9542 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9543 | Date: Thu Apr 27 10:15:16 2006 -0500 |
| b9365a26 | 9544 | |
| 7c52c4b9 WD |
9545 | Cleanup whitespaces and style issues. |
| 9546 | Removed //-style comments. | |
| 9547 | Use 80-column lines. | |
| 9548 | Remove trailing whitespace. | |
| 9549 | Remove dead code and debug cruft. | |
| b9365a26 | 9550 | |
| 7c52c4b9 WD |
9551 | commit a2320a6bf8113a09544c42d160d10ac69d049a03 |
| 9552 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9553 | Date: Thu Apr 27 08:22:39 2006 -0500 |
| b9365a26 | 9554 | |
| 7c52c4b9 | 9555 | Revert bad PCI prefetch limit change. |
| e644670b | 9556 | |
| 7c52c4b9 WD |
9557 | commit debb7354d1ea4f694154818df5e5b523f5c1cc1d |
| 9558 | Author: Jon Loeliger <jdl@freescale.com> | |
| 2b2a40be | 9559 | Date: Wed Apr 26 17:58:56 2006 -0500 |
| 53dd6ce4 | 9560 | |
| 7c52c4b9 | 9561 | Initial support for MPC8641 HPCN board. |