]>
Commit | Line | Data |
---|---|---|
1ab661dd PB |
1 | CONFIGURATION FILE |
2 | ------------------ | |
3 | ||
4 | The git configuration file contains a number of variables that affect | |
5ea5621f JH |
5 | the git command's behavior. `.git/config` file for each repository |
6 | is used to store the information for that repository, and | |
7 | `$HOME/.gitconfig` is used to store per user information to give | |
32043c9f JS |
8 | fallback values for `.git/config` file. The file `/etc/gitconfig` |
9 | can be used to store system-wide defaults. | |
5ea5621f JH |
10 | |
11 | They can be used by both the git plumbing | |
b8936cf0 | 12 | and the porcelains. The variables are divided into sections, where |
1ab661dd PB |
13 | in the fully qualified variable name the variable itself is the last |
14 | dot-separated segment and the section name is everything before the last | |
15 | dot. The variable names are case-insensitive and only alphanumeric | |
16 | characters are allowed. Some variables may appear multiple times. | |
17 | ||
e136f33b JN |
18 | Syntax |
19 | ~~~~~~ | |
20 | ||
1ab661dd | 21 | The syntax is fairly flexible and permissive; whitespaces are mostly |
e136f33b JN |
22 | ignored. The '#' and ';' characters begin comments to the end of line, |
23 | blank lines are ignored. | |
24 | ||
25 | The file consists of sections and variables. A section begins with | |
26 | the name of the section in square brackets and continues until the next | |
27 | section begins. Section names are not case sensitive. Only alphanumeric | |
28 | characters, '`-`' and '`.`' are allowed in section names. Each variable | |
29 | must belong to some section, which means that there must be section | |
30 | header before first setting of a variable. | |
31 | ||
32 | Sections can be further divided into subsections. To begin a subsection | |
33 | put its name in double quotes, separated by space from the section name, | |
34 | in the section header, like in example below: | |
35 | ||
36 | -------- | |
37 | [section "subsection"] | |
38 | ||
39 | -------- | |
40 | ||
191453f6 JN |
41 | Subsection names can contain any characters except newline (doublequote |
42 | '`"`' and backslash have to be escaped as '`\"`' and '`\\`', | |
3dff5379 | 43 | respectively) and are case sensitive. Section header cannot span multiple |
e136f33b JN |
44 | lines. Variables may belong directly to a section or to a given subsection. |
45 | You can have `[section]` if you have `[section "subsection"]`, but you | |
46 | don't need to. | |
47 | ||
48 | There is also (case insensitive) alternative `[section.subsection]` syntax. | |
49 | In this syntax subsection names follow the same restrictions as for section | |
50 | name. | |
51 | ||
52 | All the other lines are recognized as setting variables, in the form | |
53 | 'name = value'. If there is no equal sign on the line, the entire line | |
54 | is taken as 'name' and the variable is recognized as boolean "true". | |
55 | The variable names are case-insensitive and only alphanumeric | |
56 | characters and '`-`' are allowed. There can be more than one value | |
57 | for a given variable; we say then that variable is multivalued. | |
58 | ||
59 | Leading and trailing whitespace in a variable value is discarded. | |
60 | Internal whitespace within a variable value is retained verbatim. | |
61 | ||
62 | The values following the equals sign in variable assign are all either | |
63 | a string, an integer, or a boolean. Boolean values may be given as yes/no, | |
64 | 0/1 or true/false. Case is not significant in boolean values, when | |
65 | converting value to the canonical form using '--bool' type specifier; | |
e0d10e1c | 66 | `git-config` will ensure that the output is "true" or "false". |
e136f33b JN |
67 | |
68 | String values may be entirely or partially enclosed in double quotes. | |
69 | You need to enclose variable value in double quotes if you want to | |
70 | preserve leading or trailing whitespace, or if variable value contains | |
71 | beginning of comment characters (if it contains '#' or ';'). | |
72 | Double quote '`"`' and backslash '`\`' characters in variable value must | |
73 | be escaped: use '`\"`' for '`"`' and '`\\`' for '`\`'. | |
74 | ||
75 | The following escape sequences (beside '`\"`' and '`\\`') are recognized: | |
76 | '`\n`' for newline character (NL), '`\t`' for horizontal tabulation (HT, TAB) | |
77 | and '`\b`' for backspace (BS). No other char escape sequence, nor octal | |
78 | char sequences are valid. | |
79 | ||
80 | Variable value ending in a '`\`' is continued on the next line in the | |
81 | customary UNIX fashion. | |
82 | ||
83 | Some variables may require special value format. | |
1ab661dd PB |
84 | |
85 | Example | |
86 | ~~~~~~~ | |
87 | ||
88 | # Core variables | |
89 | [core] | |
90 | ; Don't trust file modes | |
91 | filemode = false | |
92 | ||
93 | # Our diff algorithm | |
94 | [diff] | |
95 | external = "/usr/local/bin/gnu-diff -u" | |
96 | renames = true | |
97 | ||
910c00c8 AK |
98 | [branch "devel"] |
99 | remote = origin | |
100 | merge = refs/heads/devel | |
101 | ||
e136f33b JN |
102 | # Proxy settings |
103 | [core] | |
104 | gitProxy="ssh" for "ssh://kernel.org/" | |
105 | gitProxy=default-proxy ; for the rest | |
910c00c8 | 106 | |
1ab661dd PB |
107 | Variables |
108 | ~~~~~~~~~ | |
109 | ||
110 | Note that this list is non-comprehensive and not necessarily complete. | |
b8936cf0 FD |
111 | For command-specific variables, you will find a more detailed description |
112 | in the appropriate manual page. You will find a description of non-core | |
1ab661dd PB |
113 | porcelain configuration variables in the respective porcelain documentation. |
114 | ||
115 | core.fileMode:: | |
116 | If false, the executable bit differences between the index and | |
117 | the working copy are ignored; useful on broken filesystems like FAT. | |
118 | See gitlink:git-update-index[1]. True by default. | |
119 | ||
5cb71f82 FL |
120 | core.autocrlf:: |
121 | If true, makes git convert `CRLF` at the end of lines in text files to | |
122 | `LF` when reading from the filesystem, and convert in reverse when | |
123 | writing to the filesystem. The variable can be set to | |
124 | 'input', in which case the conversion happens only while | |
125 | reading from the filesystem but files are written out with | |
126 | `LF` at the end of lines. Currently, which paths to consider | |
127 | "text" (i.e. be subjected to the autocrlf mechanism) is | |
128 | decided purely based on the contents. | |
129 | ||
78a8d641 JS |
130 | core.symlinks:: |
131 | If false, symbolic links are checked out as small plain files that | |
132 | contain the link text. gitlink:git-update-index[1] and | |
133 | gitlink:git-add[1] will not change the recorded type to regular | |
134 | file. Useful on filesystems like FAT that do not support | |
135 | symbolic links. True by default. | |
136 | ||
1ab661dd PB |
137 | core.gitProxy:: |
138 | A "proxy command" to execute (as 'command host port') instead | |
139 | of establishing direct connection to the remote server when | |
140 | using the git protocol for fetching. If the variable value is | |
141 | in the "COMMAND for DOMAIN" format, the command is applied only | |
142 | on hostnames ending with the specified domain string. This variable | |
143 | may be set multiple times and is matched in the given order; | |
144 | the first match wins. | |
b8936cf0 FD |
145 | + |
146 | Can be overridden by the 'GIT_PROXY_COMMAND' environment variable | |
147 | (which always applies universally, without the special "for" | |
148 | handling). | |
1ab661dd PB |
149 | |
150 | core.ignoreStat:: | |
151 | The working copy files are assumed to stay unchanged until you | |
152 | mark them otherwise manually - Git will not detect the file changes | |
153 | by lstat() calls. This is useful on systems where those are very | |
154 | slow, such as Microsoft Windows. See gitlink:git-update-index[1]. | |
155 | False by default. | |
156 | ||
9f0bb90d JH |
157 | core.preferSymlinkRefs:: |
158 | Instead of the default "symref" format for HEAD | |
159 | and other symbolic reference files, use symbolic links. | |
160 | This is sometimes needed to work with old scripts that | |
161 | expect HEAD to be a symbolic link. | |
1ab661dd | 162 | |
e4a15f40 SP |
163 | core.bare:: |
164 | If true this repository is assumed to be 'bare' and has no | |
165 | working directory associated with it. If this is the case a | |
166 | number of commands that require a working directory will be | |
167 | disabled, such as gitlink:git-add[1] or gitlink:git-merge[1]. | |
168 | + | |
169 | This setting is automatically guessed by gitlink:git-clone[1] or | |
170 | gitlink:git-init[1] when the repository was created. By default a | |
171 | repository that ends in "/.git" is assumed to be not bare (bare = | |
172 | false), while all other repositories are assumed to be bare (bare | |
173 | = true). | |
174 | ||
6de08ae6 | 175 | core.logAllRefUpdates:: |
4057deb5 JH |
176 | Updates to a ref <ref> is logged to the file |
177 | "$GIT_DIR/logs/<ref>", by appending the new and old | |
178 | SHA1, the date/time and the reason of the update, but | |
179 | only when the file exists. If this configuration | |
180 | variable is set to true, missing "$GIT_DIR/logs/<ref>" | |
181 | file is automatically created for branch heads. | |
a862f97e JH |
182 | + |
183 | This information can be used to determine what commit | |
184 | was the tip of a branch "2 days ago". | |
185 | + | |
186 | This value is true by default in a repository that has | |
187 | a working directory associated with it, and false by | |
188 | default in a bare repository. | |
6de08ae6 | 189 | |
1ab661dd PB |
190 | core.repositoryFormatVersion:: |
191 | Internal variable identifying the repository format and layout | |
192 | version. | |
193 | ||
194 | core.sharedRepository:: | |
d5dc6a76 JF |
195 | When 'group' (or 'true'), the repository is made shareable between |
196 | several users in a group (making sure all the files and objects are | |
197 | group-writable). When 'all' (or 'world' or 'everybody'), the | |
198 | repository will be readable by all users, additionally to being | |
199 | group-shareable. When 'umask' (or 'false'), git will use permissions | |
5c94f87e | 200 | reported by umask(2). See gitlink:git-init[1]. False by default. |
1ab661dd PB |
201 | |
202 | core.warnAmbiguousRefs:: | |
203 | If true, git will warn you if the ref name you passed it is ambiguous | |
204 | and might match multiple refs in the .git/refs/ tree. True by default. | |
205 | ||
3d3e95af | 206 | core.compression:: |
12f6c308 JBH |
207 | An integer -1..9, indicating the compression level for objects that |
208 | are not in a pack file. -1 is the zlib and git default. 0 means no | |
209 | compression, and 1..9 are various speed/size tradeoffs, 9 being | |
210 | slowest. | |
211 | ||
93821bd9 | 212 | core.legacyheaders:: |
bdd69c2f SB |
213 | A boolean which |
214 | changes the format of loose objects so that they are more | |
215 | efficient to pack and to send out of the repository over git | |
216 | native protocol, since v1.4.2. However, loose objects | |
217 | written in the new format cannot be read by git older than | |
218 | that version; people fetching from your repository using | |
219 | older versions of git over dumb transports (e.g. http) | |
220 | will also be affected. | |
221 | + | |
222 | To let git use the new loose object format, you have to | |
223 | set core.legacyheaders to false. | |
93821bd9 | 224 | |
60bb8b14 SP |
225 | core.packedGitWindowSize:: |
226 | Number of bytes of a pack file to map into memory in a | |
227 | single mapping operation. Larger window sizes may allow | |
228 | your system to process a smaller number of large pack files | |
229 | more quickly. Smaller window sizes will negatively affect | |
eb92242f | 230 | performance due to increased calls to the operating system's |
60bb8b14 | 231 | memory manager, but may improve performance when accessing |
22bac0ea SP |
232 | a large number of large pack files. |
233 | + | |
234 | Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32 | |
235 | MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should | |
236 | be reasonable for all users/operating systems. You probably do | |
237 | not need to adjust this value. | |
eb92242f SP |
238 | + |
239 | Common unit suffixes of 'k', 'm', or 'g' are supported. | |
60bb8b14 | 240 | |
77ccc5bb SP |
241 | core.packedGitLimit:: |
242 | Maximum number of bytes to map simultaneously into memory | |
243 | from pack files. If Git needs to access more than this many | |
244 | bytes at once to complete an operation it will unmap existing | |
245 | regions to reclaim virtual address space within the process. | |
22bac0ea SP |
246 | + |
247 | Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms. | |
248 | This should be reasonable for all users/operating systems, except on | |
249 | the largest projects. You probably do not need to adjust this value. | |
eb92242f SP |
250 | + |
251 | Common unit suffixes of 'k', 'm', or 'g' are supported. | |
77ccc5bb | 252 | |
18bdec11 SP |
253 | core.deltaBaseCacheLimit:: |
254 | Maximum number of bytes to reserve for caching base objects | |
255 | that multiple deltafied objects reference. By storing the | |
256 | entire decompressed base objects in a cache Git is able | |
257 | to avoid unpacking and decompressing frequently used base | |
258 | objects multiple times. | |
259 | + | |
260 | Default is 16 MiB on all platforms. This should be reasonable | |
261 | for all users/operating systems, except on the largest projects. | |
262 | You probably do not need to adjust this value. | |
263 | + | |
264 | Common unit suffixes of 'k', 'm', or 'g' are supported. | |
265 | ||
4514ad4f PB |
266 | alias.*:: |
267 | Command aliases for the gitlink:git[1] command wrapper - e.g. | |
268 | after defining "alias.last = cat-file commit HEAD", the invocation | |
269 | "git last" is equivalent to "git cat-file commit HEAD". To avoid | |
99b41c84 PB |
270 | confusion and troubles with script usage, aliases that |
271 | hide existing git commands are ignored. Arguments are split by | |
272 | spaces, the usual shell quoting and escaping is supported. | |
273 | quote pair and a backslash can be used to quote them. | |
4514ad4f | 274 | |
dfd42a3c TT |
275 | If the alias expansion is prefixed with an exclamation point, |
276 | it will be treated as a shell command. For example, defining | |
277 | "alias.new = !gitk --all --not ORIG_HEAD", the invocation | |
278 | "git new" is equivalent to running the shell command | |
279 | "gitk --all --not ORIG_HEAD". | |
280 | ||
1ab661dd PB |
281 | apply.whitespace:: |
282 | Tells `git-apply` how to handle whitespaces, in the same way | |
283 | as the '--whitespace' option. See gitlink:git-apply[1]. | |
284 | ||
648ad18f SB |
285 | branch.<name>.remote:: |
286 | When in branch <name>, it tells `git fetch` which remote to fetch. | |
62b339a5 | 287 | If this option is not given, `git fetch` defaults to remote "origin". |
648ad18f | 288 | |
5372806a | 289 | branch.<name>.merge:: |
62b339a5 JW |
290 | When in branch <name>, it tells `git fetch` the default refspec to |
291 | be marked for merging in FETCH_HEAD. The value has exactly to match | |
292 | a remote part of one of the refspecs which are fetched from the remote | |
293 | given by "branch.<name>.remote". | |
294 | The merge information is used by `git pull` (which at first calls | |
295 | `git fetch`) to lookup the default branch for merging. Without | |
296 | this option, `git pull` defaults to merge the first refspec fetched. | |
297 | Specify multiple values to get an octopus merge. | |
9debc324 PB |
298 | If you wish to setup `git pull` so that it merges into <name> from |
299 | another branch in the local repository, you can point | |
300 | branch.<name>.merge to the desired branch, and use the special setting | |
301 | `.` (a period) for branch.<name>.remote. | |
5372806a | 302 | |
2122591b JT |
303 | clean.requireForce:: |
304 | A boolean to make git-clean do nothing unless given -f or -n. Defaults | |
305 | to false. | |
306 | ||
f3673988 BG |
307 | color.branch:: |
308 | A boolean to enable/disable color in the output of | |
309 | gitlink:git-branch[1]. May be set to `true` (or `always`), | |
310 | `false` (or `never`) or `auto`, in which case colors are used | |
311 | only when the output is to a terminal. Defaults to false. | |
312 | ||
313 | color.branch.<slot>:: | |
314 | Use customized color for branch coloration. `<slot>` is one of | |
315 | `current` (the current branch), `local` (a local branch), | |
316 | `remote` (a tracking branch in refs/remotes/), `plain` (other | |
4f193f20 MW |
317 | refs). |
318 | + | |
319 | The value for these configuration variables is a list of colors (at most | |
320 | two) and attributes (at most one), separated by spaces. The colors | |
321 | accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`, | |
322 | `magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`, | |
323 | `blink` and `reverse`. The first color given is the foreground; the | |
324 | second is the background. The position of the attribute, if any, | |
325 | doesn't matter. | |
f3673988 | 326 | |
a159ca0c | 327 | color.diff:: |
b5376648 JH |
328 | When true (or `always`), always use colors in patch. |
329 | When false (or `never`), never. When set to `auto`, use | |
330 | colors only when the output is to the terminal. | |
331 | ||
a159ca0c | 332 | color.diff.<slot>:: |
4f193f20 MW |
333 | Use customized color for diff colorization. `<slot>` specifies |
334 | which part of the patch to use the specified color, and is one | |
335 | of `plain` (context text), `meta` (metainformation), `frag` | |
336 | (hunk header), `old` (removed lines), `new` (added lines), | |
337 | `commit` (commit headers), or `whitespace` (highlighting dubious | |
338 | whitespace). The values of these variables may be specified as | |
339 | in color.branch.<slot>. | |
b5376648 | 340 | |
1d77043b JH |
341 | color.pager:: |
342 | A boolean to enable/disable colored output when the pager is in | |
343 | use (default is true). | |
344 | ||
345 | color.status:: | |
346 | A boolean to enable/disable color in the output of | |
347 | gitlink:git-status[1]. May be set to `true` (or `always`), | |
348 | `false` (or `never`) or `auto`, in which case colors are used | |
349 | only when the output is to a terminal. Defaults to false. | |
350 | ||
351 | color.status.<slot>:: | |
352 | Use customized color for status colorization. `<slot>` is | |
353 | one of `header` (the header text of the status message), | |
82dca848 SP |
354 | `added` or `updated` (files which are added but not committed), |
355 | `changed` (files which are changed but not added in the index), | |
1d77043b | 356 | or `untracked` (files which are not tracked by git). The values of |
f3673988 | 357 | these variables may be specified as in color.branch.<slot>. |
1d77043b | 358 | |
1ab661dd PB |
359 | diff.renameLimit:: |
360 | The number of files to consider when performing the copy/rename | |
361 | detection; equivalent to the git diff option '-l'. | |
362 | ||
b68ea12e EW |
363 | diff.renames:: |
364 | Tells git to detect renames. If set to any boolean value, it | |
365 | will enable basic rename detection. If set to "copies" or | |
366 | "copy", it will detect copies, as well. | |
367 | ||
af7cf268 JH |
368 | fetch.unpackLimit:: |
369 | If the number of objects fetched over the git native | |
370 | transfer is below this | |
371 | limit, then the objects will be unpacked into loose object | |
372 | files. However if the number of received objects equals or | |
373 | exceeds this limit then the received pack will be stored as | |
374 | a pack, after adding any missing delta bases. Storing the | |
375 | pack from a push can make the push operation complete faster, | |
376 | especially on slow filesystems. | |
377 | ||
1ab661dd PB |
378 | format.headers:: |
379 | Additional email headers to include in a patch to be submitted | |
380 | by mail. See gitlink:git-format-patch[1]. | |
381 | ||
78cb59c8 JS |
382 | format.suffix:: |
383 | The default for format-patch is to output files with the suffix | |
384 | `.patch`. Use this variable to change that suffix (make sure to | |
385 | include the dot if you want it). | |
1ab661dd | 386 | |
c2120e5e JS |
387 | gc.packrefs:: |
388 | `git gc` does not run `git pack-refs` in a bare repository by | |
389 | default so that older dumb-transport clients can still fetch | |
390 | from the repository. Setting this to `true` lets `git | |
391 | gc` to run `git pack-refs`. Setting this to `false` tells | |
392 | `git gc` never to run `git pack-refs`. The default setting is | |
393 | `notbare`. Enable it only when you know you do not have to | |
394 | support such clients. The default setting will change to `true` | |
395 | at some stage, and setting this to `false` will continue to | |
396 | prevent `git pack-refs` from being run from `git gc`. | |
397 | ||
4aec56d1 JH |
398 | gc.reflogexpire:: |
399 | `git reflog expire` removes reflog entries older than | |
400 | this time; defaults to 90 days. | |
401 | ||
402 | gc.reflogexpireunreachable:: | |
403 | `git reflog expire` removes reflog entries older than | |
404 | this time and are not reachable from the current tip; | |
405 | defaults to 30 days. | |
406 | ||
48c32424 JH |
407 | gc.rerereresolved:: |
408 | Records of conflicted merge you resolved earlier are | |
409 | kept for this many days when `git rerere gc` is run. | |
410 | The default is 60 days. See gitlink:git-rerere[1]. | |
411 | ||
412 | gc.rerereunresolved:: | |
413 | Records of conflicted merge you have not resolved are | |
414 | kept for this many days when `git rerere gc` is run. | |
415 | The default is 15 days. See gitlink:git-rerere[1]. | |
416 | ||
1ab661dd | 417 | gitcvs.enabled:: |
5007af8c | 418 | Whether the cvs server interface is enabled for this repository. |
1ab661dd PB |
419 | See gitlink:git-cvsserver[1]. |
420 | ||
421 | gitcvs.logfile:: | |
5007af8c | 422 | Path to a log file where the cvs server interface well... logs |
1ab661dd PB |
423 | various stuff. See gitlink:git-cvsserver[1]. |
424 | ||
eabb0bfd FL |
425 | gitcvs.allbinary:: |
426 | If true, all files are sent to the client in mode '-kb'. This | |
427 | causes the client to treat all files as binary files which suppresses | |
428 | any newline munging it otherwise might do. A work-around for the | |
429 | fact that there is no way yet to set single files to mode '-kb'. | |
abbf5947 | 430 | |
04752868 FL |
431 | gitcvs.dbname:: |
432 | Database used by git-cvsserver to cache revision information | |
433 | derived from the git repository. The exact meaning depends on the | |
434 | used database driver, for SQLite (which is the default driver) this | |
435 | is a filename. Supports variable substitution (see | |
436 | gitlink:git-cvsserver[1] for details). May not contain semicolons (`;`). | |
437 | Default: '%Ggitcvs.%m.sqlite' | |
438 | ||
439 | gitcvs.dbdriver:: | |
440 | Used Perl DBI driver. You can specify any available driver | |
441 | for this here, but it might not work. git-cvsserver is tested | |
442 | with 'DBD::SQLite', reported to work with 'DBD::Pg', and | |
443 | reported *not* to work with 'DBD::mysql'. Experimental feature. | |
444 | May not contain double colons (`:`). Default: 'SQLite'. | |
eabb0bfd FL |
445 | See gitlink:git-cvsserver[1]. |
446 | ||
04752868 FL |
447 | gitcvs.dbuser, gitcvs.dbpass:: |
448 | Database user and password. Only useful if setting 'gitcvs.dbdriver', | |
449 | since SQLite has no concept of database users and/or passwords. | |
450 | 'gitcvs.dbuser' supports variable substitution (see | |
451 | gitlink:git-cvsserver[1] for details). | |
452 | ||
453 | All gitcvs variables except for 'gitcvs.allbinary' can also specifed | |
454 | as 'gitcvs.<access_method>.<varname>' (where 'access_method' is one | |
455 | of "ext" and "pserver") to make them apply only for the given access | |
456 | method. | |
457 | ||
1ab661dd PB |
458 | http.sslVerify:: |
459 | Whether to verify the SSL certificate when fetching or pushing | |
37425065 | 460 | over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment |
1ab661dd PB |
461 | variable. |
462 | ||
463 | http.sslCert:: | |
464 | File containing the SSL certificate when fetching or pushing | |
37425065 | 465 | over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment |
1ab661dd PB |
466 | variable. |
467 | ||
468 | http.sslKey:: | |
469 | File containing the SSL private key when fetching or pushing | |
abda1ef5 | 470 | over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment |
1ab661dd PB |
471 | variable. |
472 | ||
473 | http.sslCAInfo:: | |
474 | File containing the certificates to verify the peer with when | |
abda1ef5 | 475 | fetching or pushing over HTTPS. Can be overridden by the |
1ab661dd PB |
476 | 'GIT_SSL_CAINFO' environment variable. |
477 | ||
478 | http.sslCAPath:: | |
479 | Path containing files with the CA certificates to verify the peer | |
37425065 | 480 | with when fetching or pushing over HTTPS. Can be overridden |
1ab661dd PB |
481 | by the 'GIT_SSL_CAPATH' environment variable. |
482 | ||
483 | http.maxRequests:: | |
abda1ef5 | 484 | How many HTTP requests to launch in parallel. Can be overridden |
1ab661dd PB |
485 | by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. |
486 | ||
487 | http.lowSpeedLimit, http.lowSpeedTime:: | |
488 | If the HTTP transfer speed is less than 'http.lowSpeedLimit' | |
489 | for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. | |
abda1ef5 | 490 | Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and |
1ab661dd PB |
491 | 'GIT_HTTP_LOW_SPEED_TIME' environment variables. |
492 | ||
3ea099d4 SK |
493 | http.noEPSV:: |
494 | A boolean which disables using of EPSV ftp command by curl. | |
befc9c42 | 495 | This can helpful with some "poor" ftp servers which don't |
3ea099d4 SK |
496 | support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV' |
497 | environment variable. Default is false (curl will use EPSV). | |
498 | ||
1ab661dd PB |
499 | i18n.commitEncoding:: |
500 | Character encoding the commit messages are stored in; git itself | |
501 | does not care per se, but this information is necessary e.g. when | |
502 | importing commits from emails or in the gitk graphical history | |
503 | browser (and possibly at other places in the future or in other | |
504 | porcelains). See e.g. gitlink:git-mailinfo[1]. Defaults to 'utf-8'. | |
505 | ||
d2c11a38 JH |
506 | i18n.logOutputEncoding:: |
507 | Character encoding the commit messages are converted to when | |
508 | running `git-log` and friends. | |
509 | ||
0f03ca94 PB |
510 | log.showroot:: |
511 | If true, the initial commit will be shown as a big creation event. | |
512 | This is equivalent to a diff against an empty tree. | |
513 | Tools like gitlink:git-log[1] or gitlink:git-whatchanged[1], which | |
514 | normally hide the root commit will now show it. True by default. | |
515 | ||
1ab661dd PB |
516 | merge.summary:: |
517 | Whether to include summaries of merged commits in newly created | |
518 | merge commit messages. False by default. | |
519 | ||
c4b4a5af TT |
520 | merge.tool:: |
521 | Controls which merge resolution program is used by | |
522 | gitlink:git-mergetool[l]. Valid values are: "kdiff3", "tkdiff", | |
e4e92b3f | 523 | "meld", "xxdiff", "emerge", "vimdiff", and "opendiff" |
c4b4a5af | 524 | |
8c3275ab SP |
525 | merge.verbosity:: |
526 | Controls the amount of output shown by the recursive merge | |
527 | strategy. Level 0 outputs nothing except a final error | |
528 | message if conflicts were detected. Level 1 outputs only | |
529 | conflicts, 2 outputs conflicts and file changes. Level 5 and | |
530 | above outputs debugging information. The default is level 2. | |
531 | ||
88e7fdf2 JH |
532 | merge.<driver>.name:: |
533 | Defines a human readable name for a custom low-level | |
534 | merge driver. See gitlink:gitattributes[5] for details. | |
535 | ||
536 | merge.<driver>.driver:: | |
537 | Defines the command that implements a custom low-level | |
538 | merge driver. See gitlink:gitattributes[5] for details. | |
539 | ||
540 | merge.<driver>.recursive:: | |
541 | Names a low-level merge driver to be used when | |
542 | performing an internal merge between common ancestors. | |
543 | See gitlink:gitattributes[5] for details. | |
544 | ||
4812a93a JK |
545 | pack.window:: |
546 | The size of the window used by gitlink:git-pack-objects[1] when no | |
547 | window size is given on the command line. Defaults to 10. | |
548 | ||
842aaf93 TT |
549 | pack.depth:: |
550 | The maximum delta depth used by gitlink:git-pack-objects[1] when no | |
551 | maximum depth is given on the command line. Defaults to 10. | |
552 | ||
1ab661dd PB |
553 | pull.octopus:: |
554 | The default merge strategy to use when pulling multiple branches | |
555 | at once. | |
556 | ||
557 | pull.twohead:: | |
558 | The default merge strategy to use when pulling a single branch. | |
559 | ||
0cc6d346 SB |
560 | remote.<name>.url:: |
561 | The URL of a remote repository. See gitlink:git-fetch[1] or | |
562 | gitlink:git-push[1]. | |
563 | ||
564 | remote.<name>.fetch:: | |
565 | The default set of "refspec" for gitlink:git-fetch[1]. See | |
566 | gitlink:git-fetch[1]. | |
567 | ||
568 | remote.<name>.push:: | |
569 | The default set of "refspec" for gitlink:git-push[1]. See | |
570 | gitlink:git-push[1]. | |
571 | ||
1918278e TT |
572 | remote.<name>.skipDefaultUpdate:: |
573 | If true, this remote will be skipped by default when updating | |
574 | using the remote subcommand of gitlink:git-remote[1]. | |
575 | ||
060aafc1 | 576 | remote.<name>.receivepack:: |
5dee29ac | 577 | The default program to execute on the remote side when pushing. See |
060aafc1 UKK |
578 | option \--exec of gitlink:git-push[1]. |
579 | ||
5dee29ac UKK |
580 | remote.<name>.uploadpack:: |
581 | The default program to execute on the remote side when fetching. See | |
582 | option \--exec of gitlink:git-fetch-pack[1]. | |
583 | ||
047f636d AK |
584 | remote.<name>.tagopt:: |
585 | Setting this value to --no-tags disables automatic tag following when fetching | |
586 | from remote <name> | |
587 | ||
1918278e TT |
588 | remotes.<group>:: |
589 | The list of remotes which are fetched by "git remote update | |
590 | <group>". See gitlink:git-remote[1]. | |
591 | ||
b6945f57 JH |
592 | repack.usedeltabaseoffset:: |
593 | Allow gitlink:git-repack[1] to create packs that uses | |
594 | delta-base offset. Defaults to false. | |
595 | ||
1ab661dd PB |
596 | show.difftree:: |
597 | The default gitlink:git-diff-tree[1] arguments to be used | |
598 | for gitlink:git-show[1]. | |
599 | ||
600 | showbranch.default:: | |
601 | The default set of branches for gitlink:git-show-branch[1]. | |
602 | See gitlink:git-show-branch[1]. | |
603 | ||
ce1a79b6 | 604 | tar.umask:: |
7fe08af4 | 605 | By default, gitlink:git-tar-tree[1] sets file and directories modes |
ce1a79b6 WT |
606 | to 0666 or 0777. While this is both useful and acceptable for projects |
607 | such as the Linux Kernel, it might be excessive for other projects. | |
608 | With this variable, it becomes possible to tell | |
7fe08af4 | 609 | gitlink:git-tar-tree[1] to apply a specific umask to the modes above. |
ce1a79b6 WT |
610 | The special value "user" indicates that the user's current umask will |
611 | be used. This should be enough for most projects, as it will lead to | |
7fe08af4 | 612 | the same permissions as gitlink:git-checkout[1] would use. The default |
ce1a79b6 WT |
613 | value remains 0, which means world read-write. |
614 | ||
1ab661dd PB |
615 | user.email:: |
616 | Your email address to be recorded in any newly created commits. | |
28a94f88 JT |
617 | Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and |
618 | 'EMAIL' environment variables. See gitlink:git-commit-tree[1]. | |
1ab661dd PB |
619 | |
620 | user.name:: | |
621 | Your full name to be recorded in any newly created commits. | |
abda1ef5 | 622 | Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME' |
1ab661dd PB |
623 | environment variables. See gitlink:git-commit-tree[1]. |
624 | ||
d67778ec AP |
625 | user.signingkey:: |
626 | If gitlink:git-tag[1] is not selecting the key you want it to | |
627 | automatically when creating a signed tag, you can override the | |
628 | default selection with this variable. This option is passed | |
629 | unchanged to gpg's --local-user parameter, so you may specify a key | |
630 | using any method that gpg supports. | |
631 | ||
1ab661dd PB |
632 | whatchanged.difftree:: |
633 | The default gitlink:git-diff-tree[1] arguments to be used | |
634 | for gitlink:git-whatchanged[1]. | |
635 | ||
636 | imap:: | |
637 | The configuration variables in the 'imap' section are described | |
638 | in gitlink:git-imap-send[1]. | |
199a9218 | 639 | |
fc04c412 SP |
640 | receive.unpackLimit:: |
641 | If the number of objects received in a push is below this | |
642 | limit then the objects will be unpacked into loose object | |
643 | files. However if the number of received objects equals or | |
644 | exceeds this limit then the received pack will be stored as | |
645 | a pack, after adding any missing delta bases. Storing the | |
646 | pack from a push can make the push operation complete faster, | |
647 | especially on slow filesystems. | |
648 | ||
649 | receive.denyNonFastForwards:: | |
199a9218 JS |
650 | If set to true, git-receive-pack will deny a ref update which is |
651 | not a fast forward. Use this to prevent such an update via a push, | |
652 | even if that push is forced. This configuration variable is | |
653 | set when initializing a shared repository. | |
654 | ||
e28714c5 JH |
655 | transfer.unpackLimit:: |
656 | When `fetch.unpackLimit` or `receive.unpackLimit` are | |
657 | not set, the value of this variable is used instead. | |
658 | ||
659 |