]>
Commit | Line | Data |
---|---|---|
2dccf694 BG |
1 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
2 | %YAML 1.2 | |
3 | --- | |
4 | $id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# | |
5 | $schema: http://devicetree.org/meta-schemas/core.yaml# | |
6 | ||
7 | title: STMicroelectonics STPMIC1 Power Management IC bindings | |
8 | ||
9 | description: STMicroelectronics STPMIC1 Power Management IC | |
10 | ||
11 | maintainers: | |
12 | - pascal Paillet <p.paillet@st.com> | |
13 | ||
14 | properties: | |
15 | compatible: | |
16 | const: st,stpmic1 | |
17 | ||
18 | reg: | |
19 | const: 0x33 | |
20 | ||
21 | interrupts: | |
22 | maxItems: 1 | |
23 | ||
24 | "#interrupt-cells": | |
25 | const: 2 | |
26 | ||
27 | interrupt-controller: true | |
28 | ||
29 | onkey: | |
30 | type: object | |
31 | ||
32 | allOf: | |
33 | - $ref: ../input/input.yaml | |
34 | ||
35 | properties: | |
36 | compatible: | |
37 | const: st,stpmic1-onkey | |
38 | ||
39 | interrupts: | |
40 | items: | |
41 | - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic | |
42 | - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic | |
43 | ||
44 | interrupt-names: | |
45 | items: | |
46 | - const: onkey-falling | |
47 | - const: onkey-rising | |
48 | ||
49 | st,onkey-clear-cc-flag: | |
50 | description: onkey is able power on after an over-current shutdown event. | |
51 | $ref: /schemas/types.yaml#/definitions/flag | |
52 | ||
53 | st,onkey-pu-inactive: | |
54 | description: onkey pull up is not active | |
55 | $ref: /schemas/types.yaml#/definitions/flag | |
56 | ||
57 | power-off-time-sec: | |
58 | minimum: 1 | |
59 | maximum: 16 | |
60 | ||
61 | required: | |
62 | - compatible | |
63 | - interrupts | |
64 | - interrupt-names | |
65 | ||
66 | additionalProperties: false | |
67 | ||
68 | watchdog: | |
69 | type: object | |
70 | ||
71 | allOf: | |
72 | - $ref: ../watchdog/watchdog.yaml | |
73 | ||
74 | properties: | |
75 | compatible: | |
76 | const: st,stpmic1-wdt | |
77 | ||
78 | timeout-sec: true | |
79 | ||
80 | required: | |
81 | - compatible | |
82 | ||
83 | additionalProperties: false | |
84 | ||
85 | regulators: | |
86 | type: object | |
87 | ||
88 | description: | | |
89 | Available Regulators in STPMIC1 device are: | |
90 | - buck1 for Buck BUCK1 | |
91 | - buck2 for Buck BUCK2 | |
92 | - buck3 for Buck BUCK3 | |
93 | - buck4 for Buck BUCK4 | |
94 | - ldo1 for LDO LDO1 | |
95 | - ldo2 for LDO LDO2 | |
96 | - ldo3 for LDO LDO3 | |
97 | - ldo4 for LDO LDO4 | |
98 | - ldo5 for LDO LDO5 | |
99 | - ldo6 for LDO LDO6 | |
100 | - vref_ddr for LDO Vref DDR | |
101 | - boost for Buck BOOST | |
102 | - pwr_sw1 for VBUS_OTG switch | |
103 | - pwr_sw2 for SW_OUT switch | |
104 | Switches are fixed voltage regulators with only enable/disable capability. | |
105 | ||
106 | properties: | |
107 | compatible: | |
108 | const: st,stpmic1-regulators | |
109 | ||
110 | ldo3: | |
111 | type: object | |
112 | ||
113 | properties: | |
114 | interrupts: | |
115 | maxItems: 1 | |
116 | ||
117 | st,mask-reset: | |
118 | description: mask reset for this regulator, | |
119 | the regulator configuration is maintained during pmic reset. | |
120 | $ref: /schemas/types.yaml#/definitions/flag | |
121 | ||
122 | regulator-name: true | |
123 | regulator-boot-on: true | |
124 | regulator-always-on: true | |
125 | regulator-min-microvolt: true | |
126 | regulator-max-microvolt: true | |
127 | regulator-allow-bypass: true | |
128 | regulator-over-current-protection: true | |
129 | ||
130 | additionalProperties: false | |
131 | ||
132 | ldo4: | |
133 | type: object | |
134 | ||
135 | properties: | |
136 | interrupts: | |
137 | maxItems: 1 | |
138 | ||
139 | st,mask-reset: | |
140 | description: mask reset for this regulator, | |
141 | the regulator configuration is maintained during pmic reset. | |
142 | $ref: /schemas/types.yaml#/definitions/flag | |
143 | ||
144 | regulator-name: true | |
145 | regulator-boot-on: true | |
146 | regulator-always-on: true | |
147 | regulator-over-current-protection: true | |
148 | ||
149 | additionalProperties: false | |
150 | ||
151 | vref_ddr: | |
152 | type: object | |
153 | ||
154 | properties: | |
155 | interrupts: | |
156 | maxItems: 1 | |
157 | ||
158 | st,mask-reset: | |
159 | description: mask reset for this regulator, | |
160 | the regulator configuration is maintained during pmic reset. | |
161 | $ref: /schemas/types.yaml#/definitions/flag | |
162 | ||
163 | regulator-name: true | |
164 | regulator-boot-on: true | |
165 | regulator-always-on: true | |
166 | ||
167 | additionalProperties: false | |
168 | ||
169 | boost: | |
170 | type: object | |
171 | ||
172 | properties: | |
173 | interrupts: | |
174 | maxItems: 1 | |
175 | ||
176 | st,mask-reset: | |
177 | description: mask reset for this regulator, | |
178 | the regulator configuration is maintained during pmic reset. | |
179 | $ref: /schemas/types.yaml#/definitions/flag | |
180 | ||
181 | regulator-name: true | |
182 | regulator-boot-on: true | |
183 | regulator-always-on: true | |
184 | regulator-over-current-protection: true | |
185 | ||
186 | additionalProperties: false | |
187 | ||
188 | patternProperties: | |
189 | "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": | |
190 | description: STPMIC1 voltage regulators supplies | |
191 | ||
192 | "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": | |
193 | allOf: | |
194 | - $ref: ../regulator/regulator.yaml | |
195 | ||
196 | "^ldo[1-2,5-6]$": | |
197 | type: object | |
198 | ||
199 | properties: | |
200 | interrupts: | |
201 | maxItems: 1 | |
202 | ||
203 | st,mask-reset: | |
204 | description: mask reset for this regulator, | |
205 | the regulator configuration is maintained during pmic reset. | |
206 | $ref: /schemas/types.yaml#/definitions/flag | |
207 | ||
208 | regulator-name: true | |
209 | regulator-boot-on: true | |
210 | regulator-always-on: true | |
211 | regulator-min-microvolt: true | |
212 | regulator-max-microvolt: true | |
213 | regulator-over-current-protection: true | |
214 | regulator-enable-ramp-delay: true | |
215 | ||
216 | additionalProperties: false | |
217 | ||
218 | "^buck[1-4]$": | |
219 | type: object | |
220 | ||
221 | properties: | |
222 | interrupts: | |
223 | maxItems: 1 | |
224 | ||
225 | st,mask-reset: | |
226 | description: mask reset for this regulator, | |
227 | the regulator configuration is maintained during pmic reset. | |
228 | $ref: /schemas/types.yaml#/definitions/flag | |
229 | ||
230 | regulator-name: true | |
231 | regulator-boot-on: true | |
232 | regulator-always-on: true | |
233 | regulator-min-microvolt: true | |
234 | regulator-max-microvolt: true | |
235 | regulator-initial-mode: true | |
236 | regulator-pull-down: true | |
237 | regulator-over-current-protection: true | |
238 | regulator-enable-ramp-delay: true | |
239 | ||
240 | additionalProperties: false | |
241 | ||
242 | "^pwr_sw[1-2]$": | |
243 | type: object | |
244 | ||
245 | properties: | |
246 | interrupts: | |
247 | maxItems: 1 | |
248 | ||
249 | regulator-name: true | |
250 | regulator-boot-on: true | |
251 | regulator-always-on: true | |
252 | regulator-over-current-protection: true | |
253 | regulator-active-discharge: true | |
254 | ||
255 | additionalProperties: false | |
256 | ||
257 | required: | |
258 | - compatible | |
259 | ||
260 | additionalProperties: false | |
261 | ||
2dccf694 BG |
262 | additionalProperties: false |
263 | ||
264 | required: | |
265 | - compatible | |
266 | - reg | |
267 | - interrupts | |
268 | - "#interrupt-cells" | |
269 | - interrupt-controller | |
270 | ||
271 | examples: | |
272 | - | | |
273 | #include <dt-bindings/mfd/st,stpmic1.h> | |
274 | #include <dt-bindings/interrupt-controller/arm-gic.h> | |
f88d59fc | 275 | i2c { |
2dccf694 BG |
276 | #address-cells = <1>; |
277 | #size-cells = <0>; | |
278 | pmic@33 { | |
279 | compatible = "st,stpmic1"; | |
280 | reg = <0x33>; | |
281 | interrupt-parent = <&gpioa>; | |
282 | interrupts = <0 2>; | |
283 | ||
284 | interrupt-controller; | |
285 | #interrupt-cells = <2>; | |
286 | ||
287 | onkey { | |
288 | compatible = "st,stpmic1-onkey"; | |
289 | interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; | |
290 | interrupt-names = "onkey-falling", "onkey-rising"; | |
291 | power-off-time-sec = <10>; | |
292 | }; | |
293 | ||
294 | watchdog { | |
295 | compatible = "st,stpmic1-wdt"; | |
296 | }; | |
297 | ||
298 | regulators { | |
299 | compatible = "st,stpmic1-regulators"; | |
300 | ||
301 | ldo6-supply = <&v3v3>; | |
302 | ||
303 | buck1 { | |
304 | regulator-name = "vdd_core"; | |
305 | interrupts = <IT_CURLIM_BUCK1 0>; | |
306 | st,mask-reset; | |
307 | regulator-boot-on; | |
308 | regulator-min-microvolt = <700000>; | |
309 | regulator-max-microvolt = <1200000>; | |
310 | }; | |
311 | ||
312 | buck3 { | |
313 | regulator-name = "vdd"; | |
314 | regulator-min-microvolt = <3300000>; | |
315 | regulator-max-microvolt = <3300000>; | |
316 | regulator-boot-on; | |
317 | regulator-pull-down; | |
318 | }; | |
319 | ||
320 | buck4 { | |
321 | regulator-name = "v3v3"; | |
322 | interrupts = <IT_CURLIM_BUCK4 0>; | |
323 | regulator-min-microvolt = <3300000>; | |
324 | regulator-max-microvolt = <3300000>; | |
325 | }; | |
326 | ||
327 | ldo6 { | |
328 | regulator-name = "v1v8"; | |
329 | regulator-min-microvolt = <1800000>; | |
330 | regulator-max-microvolt = <1800000>; | |
331 | regulator-over-current-protection; | |
332 | }; | |
333 | }; | |
334 | }; | |
335 | }; | |
336 | ||
337 | ... |