]>
Commit | Line | Data |
---|---|---|
648cf924 RB |
1 | NOTES FOR THE HPE NONSTOP PLATFORM |
2 | ============================== | |
3 | ||
4 | Requirement details | |
5 | ------------------- | |
6 | ||
7 | In addition to the requirements and instructions listed | |
8 | in [INSTALL.md](INSTALL.md), the following are required as well: | |
9 | ||
10 | * The TNS/X platform supports hardware randomization. | |
11 | Specify the `--with-rand-seed=rdcpu` option to the `./Configure` script. | |
12 | This is recommended but not required. `egd` is supported at 3.0 but cannot | |
13 | be used if FIPS is selected. | |
14 | * The TNS/E platform does not support hardware randomization, so | |
15 | specify the `--with-rand-seed=egd` option to the `./Configure` script. | |
16 | ||
17 | About c99 compiler | |
18 | ------------------ | |
19 | ||
20 | The c99 compiler is required for building OpenSSL from source. While c11 | |
21 | may work, it has not been broadly tested. c99 is the only compiler | |
22 | prerequisite needed to build OpenSSL 3.0 on this platform. You should also | |
23 | have the FLOSS package installed on your system. The ITUGLIB FLOSS package | |
24 | is the only FLOSS variant that has been broadly tested. | |
25 | ||
26 | Threading Models | |
27 | ---------------- | |
28 | ||
29 | OpenSSL can be built using unthreaded, POSIX User Threads (PUT), or Standard | |
30 | POSIX Threads (SPT). Select the following build configuration for each on | |
31 | the TNS/X (L-Series) platform: | |
32 | ||
33 | * `nonstop-nsx` or default will select an unthreaded build. | |
34 | * `nonstop-nsx_put` selects the PUT build. | |
35 | * `nonstop-nsx_64_put` selects the 64 bit file length PUT build. | |
36 | * `nonstop-nsx_spt_floss` selects the SPT build with FLOSS. FLOSS is | |
37 | required for SPT builds because of a known hang when using SPT on its own. | |
38 | ||
39 | ### TNS/E Considerations | |
40 | ||
41 | The TNS/E platform is build using the same set of builds specifying `nse` | |
42 | instead of `nsx` in the set above. | |
43 | ||
44 | You cannot build for TNS/E for FIPS, so you must specify the `no-fips` | |
d318fc95 | 45 | option to `./Configure`. |
648cf924 RB |
46 | |
47 | About Prefix and OpenSSLDir | |
48 | --------------------------- | |
49 | ||
50 | Because there are many potential builds that must co-exist on any given | |
51 | NonStop node, managing the location of your build distribution is crucial. | |
52 | Keep each destination separate and distinct. Mixing any mode described in | |
53 | this document can cause application instability. The recommended approach | |
54 | is to specify the OpenSSL version and threading model in your configuration | |
55 | options, and keeping your memory and float options consistent, for example: | |
56 | ||
57 | * For 1.1 `--prefix=/usr/local-ssl1.1 --openssldir=/usr/local-ssl1.1/ssl` | |
58 | * For 1.1 PUT `--prefix=/usr/local-ssl1.1_put --openssldir=/usr/local-ssl1.1_put/ssl` | |
1501de33 RL |
59 | |
60 | As of 3.0, the NonStop configurations use the multilib attribute to distinguish | |
61 | between different models: | |
62 | ||
648cf924 | 63 | * For 3.0 `--prefix=/usr/local-ssl3.0 --openssldir=/usr/local-ssl3.0/ssl` |
1501de33 RL |
64 | |
65 | The PUT model is placed in `${prefix}/lib-put` for 32-bit models and | |
66 | `${prefix}/lib64-put` for 64-bit models. | |
648cf924 RB |
67 | |
68 | Use the `_RLD_LIB_PATH` environment variable in OSS to select the appropriate | |
69 | directory containing `libcrypto.so` and `libssl.so`. In GUARDIAN, use the | |
70 | `=_RLD_LIB_PATH` search define to locate the GUARDIAN subvolume where OpenSSL | |
71 | is installed. | |
72 | ||
73 | Float Considerations | |
74 | -------------------- | |
75 | ||
76 | OpenSSL is built using IEEE Float mode by default. If you need a different | |
77 | IEEE mode, create a new configuration specifying `tfloat-x86-64` (for Tandem | |
78 | Float) or `nfloat-x86-64` (for Neutral Float). | |
79 | ||
80 | Memory Models | |
81 | ------------- | |
82 | ||
83 | The current OpenSSL default memory model uses the default platform address | |
84 | model. If you need a different address model, you must specify the appropriate | |
85 | c99 options for compile (`CFLAGS`) and linkers (`LDFLAGS`). | |
86 | ||
d720e603 RB |
87 | Cross Compiling on Windows |
88 | -------------------------- | |
89 | ||
90 | To configure and compile OpenSSL, you will need to set up a Cygwin environment. | |
91 | The Cygwin tools should include bash, make, and any other normal tools required | |
92 | for building programs. | |
93 | ||
94 | Your `PATH` must include the bin directory for the c99 cross-compiler, as in: | |
95 | ||
96 | export PATH=/cygdrive/c/Program\ Files\ \(x86\)/HPE\ NonStop/L16.05/usr/bin:$PATH | |
97 | ||
98 | This should be set before Configure is run. For the c99 cross-compiler to work | |
99 | correctly, you also need the `COMP_ROOT` set, as in: | |
100 | ||
101 | export COMP_ROOT="C:\Program Files (x86)\HPE NonStop\L16.05" | |
102 | ||
103 | `COMP_ROOT` needs to be in Windows form. | |
104 | ||
105 | `Configure` must specify the `no-makedepend` option otherwise errors will | |
106 | result when running the build because the c99 cross-compiler does not support | |
107 | the `gcc -MT` option. An example of a `Configure` command to be run from the | |
108 | OpenSSL directory is: | |
109 | ||
110 | ./Configure nonstop-nsx_64 no-makedepend --with-rand-seed=rdcpu | |
111 | ||
112 | Do not forget to include any OpenSSL cross-compiling prefix and certificate | |
113 | options when creating your libraries. | |
114 | ||
115 | The OpenSSL test suite will not run on your workstation. In order to verify the | |
116 | build, you will need to perform the build and test steps in OSS in your NonStop | |
117 | server. You can also build under gcc and run the test suite for Windows but that | |
118 | is not equivalent. | |
119 | ||
120 | **Note:** In the event that you are attempting a FIPS-compliant cross-compile, | |
121 | be aware that signatures may not match between builds done under OSS and under | |
122 | cross-compiles as the compilers do not necessarily generate identical objects. | |
123 | Anything and everything to do with FIPS is outside the scope of this document. | |
124 | Refer to the FIPS security policy for more information. | |
125 | ||
126 | The following build configurations have been successfully attempted at one | |
127 | point or another. If you are successful in your cross-compile efforts, please | |
128 | update this list: | |
129 | ||
130 | - nonstop-nsx_64 | |
131 | - nonstop-nsx_64_put | |
132 | ||
133 | **Note:** Cross-compile builds for TNS/E have not been attempted, but should | |
134 | follow the same considerations as for TNS/X above. SPT builds generally require | |
135 | FLOSS, which is not available for workstation builds. As a result, SPT builds | |
136 | of OpenSSL cannot be cross-compiled. | |
137 | ||
138 | Also see the NSDEE discussion below for more historical information. | |
139 | ||
648cf924 RB |
140 | Cross Compiling with NSDEE |
141 | -------------------------- | |
142 | ||
d720e603 RB |
143 | **Note:** None of these builds have been tested by the platform maintainer and |
144 | are supplied for historical value. Please submit a Pull Request to OpenSSL | |
145 | should these need to be adjusted. | |
648cf924 RB |
146 | |
147 | If you are attempting to build OpenSSL with NSDEE, you will need to specify | |
148 | the following variables. The following set of compiler defines are required: | |
149 | ||
150 | # COMP_ROOT must be a full path for the build system (e.g. windows) | |
151 | COMP_ROOT=$(cygpath -w /path/to/comp_root) | |
152 | # CC must be executable by your shell | |
153 | CC=/path/to/c99 | |
154 | ||
155 | ### Optional Build Variables | |
156 | ||
157 | DBGFLAG="--debug" | |
158 | CIPHENABLES="enable-ssl3 enable-ssl3-method enable-weak-ssl-ciphers enable-rc4" | |
159 | ||
160 | ### Internal Known TNS/X to TNS/E Cross Compile Variables | |
161 | ||
162 | The following definition is required if you are building on TNS/X for TNS/E | |
163 | and have access to a TNS/E machine on your EXPAND network - with an example | |
164 | node named `\CS3`: | |
165 | ||
166 | SYSTEMLIBS="-L/E/cs3/usr/local/lib" | |
167 | ||
168 | Version Procedure (VPROC) Considerations | |
169 | ---------------------------------------- | |
170 | ||
171 | If you require a VPROC entry for platform version identification, use the | |
172 | following variables: | |
173 | ||
174 | ### For Itanium | |
175 | ||
176 | OPENSSL_VPROC_PREFIX=T0085H06 | |
177 | ||
178 | ### For x86 | |
179 | ||
180 | OPENSSL_VPROC_PREFIX=T0085L01 | |
181 | ||
182 | ### Common Definition | |
183 | ||
184 | export OPENSSL_VPROC=${OPENSSL_VPROC_PREFIX}_$( | |
185 | . VERSION.dat | |
186 | if [ -n "$PRE_RELEASE_TAG" ]; then | |
187 | PRE_RELEASE_TAG="-$PRE_RELEASE_TAG" | |
188 | fi | |
189 | echo "$MAJOR.$MINOR.$PATCH$PRE_RELEASE_TAG$BUILD_METADATA" |\ | |
190 | sed -e 's/[-.+]/_/g' | |
191 | ) | |
192 | ||
193 | Example Configure Targets | |
194 | ------------------------- | |
195 | ||
196 | For OSS targets, the main DLL names will be `libssl.so` and `libcrypto.so`. | |
197 | For GUARDIAN targets, DLL names will be `ssl` and `crypto`. The following | |
198 | assumes that your PWD is set according to your installation standards. | |
199 | ||
200 | ./Configure nonstop-nsx --prefix=${PWD} \ | |
201 | --openssldir=${PWD}/ssl no-threads \ | |
202 | --with-rand-seed=rdcpu ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
203 | ./Configure nonstop-nsx_g --prefix=${PWD} \ | |
204 | --openssldir=${PWD}/ssl no-threads \ | |
205 | --with-rand-seed=rdcpu ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
206 | ./Configure nonstop-nsx_put --prefix=${PWD} \ | |
207 | --openssldir=${PWD}/ssl threads "-D_REENTRANT" \ | |
208 | --with-rand-seed=rdcpu ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
209 | ./Configure nonstop-nsx_spt_floss --prefix=${PWD} \ | |
210 | --openssldir=${PWD}/ssl threads "-D_REENTRANT" \ | |
211 | --with-rand-seed=rdcpu ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
212 | ./Configure nonstop-nsx_64 --prefix=${PWD} \ | |
213 | --openssldir=${PWD}/ssl no-threads \ | |
214 | --with-rand-seed=rdcpu ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
215 | ./Configure nonstop-nsx_64_put --prefix=${PWD} \ | |
216 | --openssldir=${PWD}/ssl threads "-D_REENTRANT" \ | |
217 | --with-rand-seed=rdcpu ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
218 | ./Configure nonstop-nsx_g_tandem --prefix=${PWD} \ | |
219 | --openssldir=${PWD}/ssl no-threads \ | |
220 | --with-rand-seed=rdcpu ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
221 | ||
222 | ./Configure nonstop-nse --prefix=${PWD} \ | |
223 | --openssldir=${PWD}/ssl no-threads \ | |
224 | --with-rand-seed=egd ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
225 | ./Configure nonstop-nse_g --prefix=${PWD} \ | |
226 | --openssldir=${PWD}/ssl no-threads \ | |
227 | --with-rand-seed=egd ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
228 | ./Configure nonstop-nse_put --prefix=${PWD} \ | |
229 | --openssldir=${PWD}/ssl threads "-D_REENTRANT" \ | |
230 | --with-rand-seed=egd ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
231 | ./Configure nonstop-nse_spt_floss --prefix=${PWD} \ | |
232 | --openssldir=${PWD}/ssl threads "-D_REENTRANT" \ | |
233 | --with-rand-seed=egd ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
234 | ./Configure nonstop-nse_64 --prefix=${PWD} \ | |
235 | --openssldir=${PWD}/ssl no-threads \ | |
236 | --with-rand-seed=egd ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
237 | ./Configure nonstop-nse_64_put --prefix=${PWD} \ | |
238 | --openssldir=${PWD}/ssl threads "-D_REENTRANT" | |
239 | --with-rand-seed=egd ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} | |
240 | ./Configure nonstop-nse_g_tandem --prefix=${PWD} \ | |
241 | --openssldir=${PWD}/ssl no-threads \ | |
242 | --with-rand-seed=egd ${CIPHENABLES} ${DBGFLAG} ${SYSTEMLIBS} |