]>
Commit | Line | Data |
---|---|---|
2500ee63 AF |
1 | /* |
2 | * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com> | |
3 | * | |
4 | * Based on am3517-evm.dts | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License version 2 as | |
8 | * published by the Free Software Foundation. | |
9 | */ | |
10 | ||
a00ff99c AF |
11 | / { |
12 | cpus { | |
13 | cpu@0 { | |
14 | cpu0-supply = <&vdd_core_reg>; | |
15 | }; | |
16 | }; | |
6bf5e341 AF |
17 | |
18 | wl12xx_buffer: wl12xx_buf { | |
19 | compatible = "regulator-fixed"; | |
20 | regulator-name = "wl1271_buf"; | |
21 | regulator-min-microvolt = <1800000>; | |
22 | regulator-max-microvolt = <1800000>; | |
23 | pinctrl-names = "default"; | |
24 | pinctrl-0 = <&wl12xx_buffer_pins>; | |
25 | gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */ | |
26 | regulator-always-on; | |
27 | vin-supply = <&vdd_1v8_reg>; | |
28 | }; | |
29 | ||
30 | wl12xx_vmmc2: wl12xx_vmmc2 { | |
31 | compatible = "regulator-fixed"; | |
32 | regulator-name = "vwl1271"; | |
33 | regulator-min-microvolt = <1800000>; | |
34 | regulator-max-microvolt = <1800000>; | |
35 | pinctrl-names = "default"; | |
36 | pinctrl-0 = <&wl12xx_wkup_pins>; | |
37 | gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */ | |
38 | startup-delay-us = <70000>; | |
39 | enable-active-high; | |
40 | regulator-always-on; | |
41 | vin-supply = <&wl12xx_buffer>; | |
42 | }; | |
a00ff99c AF |
43 | }; |
44 | ||
2500ee63 AF |
45 | &gpmc { |
46 | ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ | |
47 | ||
48 | nand@0,0 { | |
49 | compatible = "ti,omap2-nand"; | |
50 | linux,mtd-name = "micron,mt29f4g16abchch"; | |
51 | reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ | |
52 | nand-bus-width = <16>; | |
53 | ti,nand-ecc-opt = "bch8"; | |
54 | gpmc,sync-clk-ps = <0>; | |
55 | gpmc,cs-on-ns = <0>; | |
56 | gpmc,cs-rd-off-ns = <44>; | |
57 | gpmc,cs-wr-off-ns = <44>; | |
58 | gpmc,adv-on-ns = <6>; | |
59 | gpmc,adv-rd-off-ns = <34>; | |
60 | gpmc,adv-wr-off-ns = <44>; | |
61 | gpmc,we-off-ns = <40>; | |
62 | gpmc,oe-off-ns = <54>; | |
63 | gpmc,access-ns = <64>; | |
64 | gpmc,rd-cycle-ns = <82>; | |
65 | gpmc,wr-cycle-ns = <82>; | |
66 | gpmc,wr-access-ns = <40>; | |
67 | gpmc,wr-data-mux-bus-ns = <0>; | |
68 | gpmc,device-width = <2>; | |
69 | #address-cells = <1>; | |
70 | #size-cells = <1>; | |
71 | }; | |
72 | }; | |
3510b20c AF |
73 | |
74 | &i2c1 { | |
75 | clock-frequency = <400000>; | |
76 | ||
7b0038e4 AF |
77 | s35390a: s35390a@30 { |
78 | compatible = "sii,s35390a"; | |
79 | reg = <0x30>; | |
80 | ||
81 | pinctrl-names = "default"; | |
82 | pinctrl-0 = <&rtc_pins>; | |
83 | interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */ | |
84 | }; | |
85 | ||
3510b20c AF |
86 | tps: tps65023@48 { |
87 | compatible = "ti,tps65023"; | |
88 | reg = <0x48>; | |
89 | ||
90 | regulators { | |
91 | vdd_core_reg: VDCDC1 { | |
92 | regulator-name = "vdd_core"; | |
3510b20c AF |
93 | regulator-always-on; |
94 | regulator-min-microvolt = <1200000>; | |
95 | regulator-max-microvolt = <1200000>; | |
96 | }; | |
97 | ||
98 | vdd_io_reg: VDCDC2 { | |
99 | regulator-name = "vdd_io"; | |
3510b20c AF |
100 | regulator-always-on; |
101 | regulator-min-microvolt = <3300000>; | |
102 | regulator-max-microvolt = <3300000>; | |
103 | }; | |
104 | ||
105 | vdd_1v8_reg: VDCDC3 { | |
106 | regulator-name = "vdd_1v8"; | |
3510b20c AF |
107 | regulator-always-on; |
108 | regulator-min-microvolt = <1800000>; | |
109 | regulator-max-microvolt = <1800000>; | |
110 | }; | |
111 | ||
112 | vdd_usb18_reg: LDO1 { | |
113 | regulator-name = "vdd_usb18"; | |
3510b20c AF |
114 | regulator-always-on; |
115 | regulator-min-microvolt = <1800000>; | |
116 | regulator-max-microvolt = <1800000>; | |
117 | }; | |
118 | ||
119 | vdd_usb33_reg: LDO2 { | |
120 | regulator-name = "vdd_usb33"; | |
3510b20c AF |
121 | regulator-always-on; |
122 | regulator-min-microvolt = <3300000>; | |
123 | regulator-max-microvolt = <3300000>; | |
124 | }; | |
125 | }; | |
126 | }; | |
ad365516 AF |
127 | |
128 | touchscreen: tsc2004@4b { | |
129 | compatible = "ti,tsc2004"; | |
130 | reg = <0x4b>; | |
131 | ||
132 | vio-supply = <&vdd_io_reg>; | |
133 | ||
134 | pinctrl-names = "default"; | |
135 | pinctrl-0 = <&tsc2004_pins>; | |
136 | interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */ | |
137 | ||
138 | touchscreen-fuzz-x = <4>; | |
139 | touchscreen-fuzz-y = <7>; | |
140 | touchscreen-fuzz-pressure = <2>; | |
141 | touchscreen-size-x = <480>; | |
142 | touchscreen-size-y = <272>; | |
143 | touchscreen-max-pressure = <2048>; | |
144 | ||
145 | ti,x-plate-ohms = <280>; | |
146 | ti,esd-recovery-timeout-ms = <8000>; | |
147 | }; | |
148 | }; | |
149 | ||
6bf5e341 AF |
150 | &mmc2 { |
151 | interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>; | |
152 | ||
153 | status = "okay"; | |
154 | pinctrl-names = "default"; | |
155 | pinctrl-0 = <&mmc2_pins>; | |
156 | vmmc-supply = <&wl12xx_vmmc2>; | |
157 | non-removable; | |
158 | bus-width = <4>; | |
159 | cap-power-off-card; | |
160 | #address-cells = <1>; | |
161 | #size-cells = <0>; | |
162 | wlcore: wlcore@2 { | |
163 | compatible = "ti,wl1271"; | |
164 | reg = <2>; | |
165 | interrupt-parent = <&gpio6>; | |
419b194c | 166 | interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */ |
6bf5e341 AF |
167 | ref-clock-frequency = <26000000>; |
168 | tcxo-clock-frequency = <26000000>; | |
169 | }; | |
170 | }; | |
171 | ||
8b75b3dc AF |
172 | &uart2 { |
173 | pinctrl-names = "default"; | |
174 | pinctrl-0 = <&uart2_pins>; | |
175 | ||
176 | bluetooth { | |
177 | compatible = "ti,wl1271-st"; | |
178 | enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */ | |
179 | max-speed = <3000000>; | |
180 | }; | |
181 | }; | |
6bf5e341 | 182 | |
ad365516 | 183 | &omap3_pmx_core { |
7b0038e4 | 184 | |
6bf5e341 AF |
185 | wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { |
186 | pinctrl-single,pins = < | |
187 | OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ | |
188 | >; | |
189 | }; | |
190 | ||
191 | mmc2_pins: pinmux_mmc2_pins { | |
192 | pinctrl-single,pins = < | |
193 | OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */ | |
194 | OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */ | |
195 | OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat0.mmc2_dat0 */ | |
196 | OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat1.mmc2_dat1 */ | |
197 | OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat2.mmc2_dat2 */ | |
198 | OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat3.mmc2_dat3 */ | |
199 | OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */ | |
200 | OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */ | |
201 | OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */ | |
202 | OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */ | |
203 | OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */ | |
204 | >; | |
205 | }; | |
206 | ||
7b0038e4 AF |
207 | rtc_pins: pinmux_rtc_pins { |
208 | pinctrl-single,pins = < | |
209 | OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */ | |
210 | >; | |
211 | }; | |
212 | ||
ad365516 AF |
213 | tsc2004_pins: pinmux_tsc2004_pins { |
214 | pinctrl-single,pins = < | |
215 | OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */ | |
216 | >; | |
217 | }; | |
8b75b3dc AF |
218 | |
219 | uart2_pins: pinmux_uart2_pins { | |
220 | pinctrl-single,pins = < | |
221 | OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ | |
222 | OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */ | |
223 | OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ | |
224 | OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ | |
225 | OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0) /* gpio_56 */ | |
226 | >; | |
227 | }; | |
3510b20c | 228 | }; |
6bf5e341 AF |
229 | |
230 | &omap3_pmx_wkup { | |
231 | ||
232 | wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins { | |
233 | pinctrl-single,pins = < | |
234 | OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ | |
235 | >; | |
236 | }; | |
237 | }; |