[thirdparty/linux.git] / arch / arm / boot / dts / marvell / kirkwood-goflexnet.dts

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;

#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"

/ {
	model = "Seagate GoFlex Net";
	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";

	memory {
		device_type = "memory";
		reg = <0x00000000 0x8000000>;
	};

	chosen {
		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
		stdout-path = &uart0;
	};

	ocp@f1000000 {
		pinctrl: pin-controller@10000 {
			pmx_usb_power_enable: pmx-usb-power-enable {
				marvell,pins = "mpp29";
				marvell,function = "gpio";
			};
			pmx_led_right_cap_0: pmx-led_right_cap_0 {
				marvell,pins = "mpp38";
				marvell,function = "gpio";
			};
			pmx_led_right_cap_1: pmx-led_right_cap_1 {
				marvell,pins = "mpp39";
				marvell,function = "gpio";
			};
			pmx_led_right_cap_2: pmx-led_right_cap_2 {
				marvell,pins = "mpp40";
				marvell,function = "gpio";
			};
			pmx_led_right_cap_3: pmx-led_right_cap_3 {
				marvell,pins = "mpp41";
				marvell,function = "gpio";
			};
			pmx_led_left_cap_0: pmx-led_left_cap_0 {
				marvell,pins = "mpp42";
				marvell,function = "gpio";
			};
			pmx_led_left_cap_1: pmx-led_left_cap_1 {
				marvell,pins = "mpp43";
				marvell,function = "gpio";
			};
			pmx_led_left_cap_2: pmx-led_left_cap_2 {
				marvell,pins = "mpp44";
				marvell,function = "gpio";
			};
			pmx_led_left_cap_3: pmx-led_left_cap_3 {
				marvell,pins = "mpp45";
				marvell,function = "gpio";
			};
			pmx_led_green: pmx-led_green {
				marvell,pins = "mpp46";
				marvell,function = "gpio";
			};
			pmx_led_orange: pmx-led_orange {
				marvell,pins = "mpp47";
				marvell,function = "gpio";
			};
		};
		serial@12000 {
			status = "okay";
		};

		sata@80000 {
			status = "okay";
			nr-ports = <2>;
		};

	};
	gpio-leds {
		compatible = "gpio-leds";
		pinctrl-0 = < &pmx_led_orange
			      &pmx_led_left_cap_0 &pmx_led_left_cap_1
			      &pmx_led_left_cap_2 &pmx_led_left_cap_3
			      &pmx_led_right_cap_0 &pmx_led_right_cap_1
			      &pmx_led_right_cap_2 &pmx_led_right_cap_3
			    >;
		pinctrl-names = "default";

		health {
			label = "status:green:health";
			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};
		fault {
			label = "status:orange:fault";
			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
		};
		left0 {
			label = "status:white:left0";
			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
		};
		left1 {
			label = "status:white:left1";
			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
		};
		left2 {
			label = "status:white:left2";
			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
		};
		left3 {
			label = "status:white:left3";
			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
		};
		right0 {
			label = "status:white:right0";
			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
		};
		right1 {
			label = "status:white:right1";
			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
		};
		right2 {
			label = "status:white:right2";
			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
		};
		right3 {
			label = "status:white:right3";
			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
		};
	};
	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&pmx_usb_power_enable>;
		pinctrl-names = "default";

		usb_power: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "USB Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
		};
	};
};

&nand {
	chip-delay = <40>;
	status = "okay";

	partition@0 {
		label = "u-boot";
		reg = <0x0000000 0x100000>;
		read-only;
	};

	partition@100000 {
		label = "uImage";
		reg = <0x0100000 0x400000>;
	};

	partition@500000 {
		label = "pogoplug";
		reg = <0x0500000 0x2000000>;
	};

	partition@2500000 {
		label = "root";
		reg = <0x02500000 0xd800000>;
	};
};

&mdio {
	status = "okay";

	ethphy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&eth0 {
	status = "okay";
	ethernet0-port@0 {
		phy-handle = <&ethphy0>;
	};
};
Commit	Line	Data
b2441318	1	// SPDX-License-Identifier: GPL-2.0
5136b2aa JC	2	/dts-v1/;
5136b2aa JC	3
0ab6129c EG	4	#include "kirkwood.dtsi"
0ab6129c EG	5	#include "kirkwood-6281.dtsi"
5136b2aa JC	6
	7	/ {
	8	model = "Seagate GoFlex Net";
f39c1101	9	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
5136b2aa JC	10
	11	memory {
	12	device_type = "memory";
	13	reg = <0x00000000 0x8000000>;
	14	};
	15
	16	chosen {
	17	bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
ab833614	18	stdout-path = &uart0;
5136b2aa JC	19	};
	20
	21	ocp@f1000000 {
a9483969	22	pinctrl: pin-controller@10000 {
5d183ef9 AL	23	pmx_usb_power_enable: pmx-usb-power-enable {
	24	marvell,pins = "mpp29";
	25	marvell,function = "gpio";
	26	};
	27	pmx_led_right_cap_0: pmx-led_right_cap_0 {
	28	marvell,pins = "mpp38";
	29	marvell,function = "gpio";
	30	};
	31	pmx_led_right_cap_1: pmx-led_right_cap_1 {
	32	marvell,pins = "mpp39";
	33	marvell,function = "gpio";
	34	};
	35	pmx_led_right_cap_2: pmx-led_right_cap_2 {
	36	marvell,pins = "mpp40";
	37	marvell,function = "gpio";
	38	};
	39	pmx_led_right_cap_3: pmx-led_right_cap_3 {
	40	marvell,pins = "mpp41";
	41	marvell,function = "gpio";
	42	};
	43	pmx_led_left_cap_0: pmx-led_left_cap_0 {
	44	marvell,pins = "mpp42";
	45	marvell,function = "gpio";
	46	};
	47	pmx_led_left_cap_1: pmx-led_left_cap_1 {
	48	marvell,pins = "mpp43";
	49	marvell,function = "gpio";
	50	};
	51	pmx_led_left_cap_2: pmx-led_left_cap_2 {
	52	marvell,pins = "mpp44";
	53	marvell,function = "gpio";
	54	};
	55	pmx_led_left_cap_3: pmx-led_left_cap_3 {
	56	marvell,pins = "mpp45";
	57	marvell,function = "gpio";
	58	};
	59	pmx_led_green: pmx-led_green {
	60	marvell,pins = "mpp46";
	61	marvell,function = "gpio";
	62	};
	63	pmx_led_orange: pmx-led_orange {
	64	marvell,pins = "mpp47";
	65	marvell,function = "gpio";
	66	};
	67	};
5136b2aa	68	serial@12000 {
8f322209	69	status = "okay";
5136b2aa JC	70	};
5136b2aa JC	71
f3af1c73 AL	72	sata@80000 {
	73	status = "okay";
	74	nr-ports = <2>;
	75	};
	76
	77	};
	78	gpio-leds {
	79	compatible = "gpio-leds";
7cfbb287 TP	80	pinctrl-0 = < &pmx_led_orange
	81	&pmx_led_left_cap_0 &pmx_led_left_cap_1
	82	&pmx_led_left_cap_2 &pmx_led_left_cap_3
	83	&pmx_led_right_cap_0 &pmx_led_right_cap_1
	84	&pmx_led_right_cap_2 &pmx_led_right_cap_3
	85	>;
	86	pinctrl-names = "default";
f3af1c73 AL	87
	88	health {
	89	label = "status:green:health";
3a31f2d7	90	gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
dcdf14c7	91	default-state = "keep";
f3af1c73 AL	92	};
	93	fault {
	94	label = "status:orange:fault";
3a31f2d7	95	gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
f3af1c73 AL	96	};
	97	left0 {
	98	label = "status:white:left0";
3a31f2d7	99	gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	100	};
	101	left1 {
	102	label = "status:white:left1";
3a31f2d7	103	gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	104	};
	105	left2 {
	106	label = "status:white:left2";
3a31f2d7	107	gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	108	};
	109	left3 {
	110	label = "status:white:left3";
3a31f2d7	111	gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	112	};
	113	right0 {
	114	label = "status:white:right0";
3a31f2d7	115	gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	116	};
	117	right1 {
	118	label = "status:white:right1";
3a31f2d7	119	gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	120	};
	121	right2 {
	122	label = "status:white:right2";
3a31f2d7	123	gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	124	};
	125	right3 {
	126	label = "status:white:right3";
3a31f2d7	127	gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
f3af1c73	128	};
5136b2aa	129	};
280b348d AL	130	regulators {
	131	compatible = "simple-bus";
	132	#address-cells = <1>;
	133	#size-cells = <0>;
7cfbb287 TP	134	pinctrl-0 = <&pmx_usb_power_enable>;
7cfbb287 TP	135	pinctrl-names = "default";
280b348d AL	136
	137	usb_power: regulator@1 {
	138	compatible = "regulator-fixed";
	139	reg = <1>;
	140	regulator-name = "USB Power";
	141	regulator-min-microvolt = <5000000>;
	142	regulator-max-microvolt = <5000000>;
	143	enable-active-high;
	144	regulator-always-on;
	145	regulator-boot-on;
3a31f2d7	146	gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
280b348d AL	147	};
280b348d AL	148	};
5136b2aa	149	};
876e2333	150
7045ff5a JG	151	&nand {
	152	chip-delay = <40>;
	153	status = "okay";
	154
	155	partition@0 {
	156	label = "u-boot";
	157	reg = <0x0000000 0x100000>;
	158	read-only;
	159	};
	160
	161	partition@100000 {
	162	label = "uImage";
	163	reg = <0x0100000 0x400000>;
	164	};
	165
	166	partition@500000 {
	167	label = "pogoplug";
	168	reg = <0x0500000 0x2000000>;
	169	};
	170
	171	partition@2500000 {
	172	label = "root";
	173	reg = <0x02500000 0xd800000>;
	174	};
	175	};
	176
876e2333 SH	177	&mdio {
	178	status = "okay";
	179
	180	ethphy0: ethernet-phy@0 {
876e2333 SH	181	reg = <0>;
	182	};
	183	};
	184
	185	&eth0 {
	186	status = "okay";
	187	ethernet0-port@0 {
	188	phy-handle = <&ethphy0>;
	189	};
	190	};