[thirdparty/linux.git] / arch / arm / boot / dts / r8a7792-blanche.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source for the Blanche board
 *
 * Copyright (C) 2014 Renesas Electronics Corporation
 * Copyright (C) 2016 Cogent  Embedded, Inc.
 */

/dts-v1/;
#include "r8a7792.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "Blanche";
	compatible = "renesas,blanche", "renesas,r8a7792";

	aliases {
		serial0 = &scif0;
		serial1 = &scif3;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
		stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x40000000>;
	};

	d3_3v: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "D3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};

	ethernet@18000000 {
		compatible = "smsc,lan89218", "smsc,lan9115";
		reg = <0 0x18000000 0 0x100>;
		phy-mode = "mii";
		interrupt-parent = <&irqc>;
		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
		smsc,irq-push-pull;
		reg-io-width = <4>;
		vddvario-supply = <&d3_3v>;
		vdd33a-supply = <&d3_3v>;

		pinctrl-0 = <&lan89218_pins>;
		pinctrl-names = "default";
	};

	vga-encoder {
		compatible = "adi,adv7123";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				adv7123_in: endpoint {
					remote-endpoint = <&du_out_rgb1>;
				};
			};
			port@1 {
				reg = <1>;
				adv7123_out: endpoint {
					remote-endpoint = <&vga_in>;
				};
			};
		};
	};

	hdmi-out {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con: endpoint {
				remote-endpoint = <&adv7511_out>;
			};
		};
	};

	vga {
		compatible = "vga-connector";

		port {
			vga_in: endpoint {
				remote-endpoint = <&adv7123_out>;
			};
		};
	};

	x1_clk: x1 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <74250000>;
	};

	x2_clk: x2 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <65000000>;
	};

	keyboard {
		compatible = "gpio-keys";

		key-1 {
			linux,code = <KEY_1>;
			label = "SW2-1";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
		};
		key-2 {
			linux,code = <KEY_2>;
			label = "SW2-2";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
		};
		key-3 {
			linux,code = <KEY_3>;
			label = "SW2-3";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
		};
		key-4 {
			linux,code = <KEY_4>;
			label = "SW2-4";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
		};
		key-a {
			linux,code = <KEY_A>;
			label = "SW24";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
		};
		key-b {
			linux,code = <KEY_B>;
			label = "SW25";
			wakeup-source;
			debounce-interval = <20>;
			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led17 {
			gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
		};
		led18 {
			gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
		};
		led19 {
			gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
		};
		led20 {
			gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
		};
	};

	vcc_sdhi0: regulator-vcc-sdhi0 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI0 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&can_clk {
	clock-frequency = <48000000>;
};

&pfc {
	scif0_pins: scif0 {
		groups = "scif0_data";
		function = "scif0";
	};

	scif3_pins: scif3 {
		groups = "scif3_data";
		function = "scif3";
	};

	lan89218_pins: lan89218 {
		intc {
			groups = "intc_irq0";
			function = "intc";
		};
		lbsc {
			groups = "lbsc_ex_cs0";
			function = "lbsc";
		};
	};

	can0_pins: can0 {
		groups = "can0_data", "can_clk";
		function = "can0";
	};

	sdhi0_pins: sdhi0 {
		groups = "sdhi0_data4", "sdhi0_ctrl";
		function = "sdhi0";
	};

	du0_pins: du0 {
		groups = "du0_rgb888", "du0_sync", "du0_disp";
		function = "du0";
	};

	du1_pins: du1 {
		groups = "du1_rgb666", "du1_sync", "du1_disp";
		function = "du1";
	};

	pmic_irq_pins: pmicirq {
		groups = "intc_irq2";
		function = "intc";
	};
};

&rwdt {
	timeout-sec = <60>;
	status = "okay";
};

&scif0 {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scif3 {
	pinctrl-0 = <&scif3_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&can0 {
	pinctrl-0 = <&can0_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vcc_sdhi0>;
	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&i2c1 {
	status = "okay";
	clock-frequency = <400000>;

	hdmi@39 {
		compatible = "adi,adv7511w";
		reg = <0x39>;
		interrupt-parent = <&irqc>;
		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;

		adi,input-depth = <8>;
		adi,input-colorspace = "rgb";
		adi,input-clock = "1x";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				adv7511_in: endpoint {
					remote-endpoint = <&du_out_rgb0>;
				};
			};

			port@1 {
				reg = <1>;
				adv7511_out: endpoint {
					remote-endpoint = <&hdmi_con>;
				};
			};
		};
	};
};

&iic3 {
	status = "okay";

	pmic@58 {
		compatible = "dlg,da9063";
		reg = <0x58>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_irq_pins>;
		interrupt-parent = <&irqc>;
		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
		interrupt-controller;

		rtc {
			compatible = "dlg,da9063-rtc";
		};

		wdt {
			compatible = "dlg,da9063-watchdog";
		};
	};
};

&du {
	pinctrl-0 = <&du0_pins &du1_pins>;
	pinctrl-names = "default";

	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
	status = "okay";

	ports {
		port@0 {
			endpoint {
				remote-endpoint = <&adv7511_in>;
			};
		};
		port@1 {
			endpoint {
				remote-endpoint = <&adv7123_in>;
			};
		};
	};
};
Commit	Line	Data
cdbfaf64	1	// SPDX-License-Identifier: GPL-2.0
4018fba4 SS	2	/*
	3	* Device Tree Source for the Blanche board
	4	*
	5	* Copyright (C) 2014 Renesas Electronics Corporation
	6	* Copyright (C) 2016 Cogent Embedded, Inc.
4018fba4 SS	7	*/
	8
	9	/dts-v1/;
	10	#include "r8a7792.dtsi"
1c7f349a SS	11	#include <dt-bindings/gpio/gpio.h>
1c7f349a SS	12	#include <dt-bindings/input/input.h>
4018fba4 SS	13
	14	/ {
	15	model = "Blanche";
	16	compatible = "renesas,blanche", "renesas,r8a7792";
	17
	18	aliases {
	19	serial0 = &scif0;
	20	serial1 = &scif3;
	21	};
	22
	23	chosen {
07d2bf96	24	bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
4018fba4 SS	25	stdout-path = "serial0:115200n8";
	26	};
	27
	28	memory@40000000 {
	29	device_type = "memory";
	30	reg = <0 0x40000000 0 0x40000000>;
	31	};
f80b6dfd SS	32
	33	d3_3v: regulator-3v3 {
	34	compatible = "regulator-fixed";
	35	regulator-name = "D3.3V";
	36	regulator-min-microvolt = <3300000>;
	37	regulator-max-microvolt = <3300000>;
	38	regulator-boot-on;
	39	regulator-always-on;
	40	};
	41
	42	ethernet@18000000 {
	43	compatible = "smsc,lan89218", "smsc,lan9115";
	44	reg = <0 0x18000000 0 0x100>;
	45	phy-mode = "mii";
	46	interrupt-parent = <&irqc>;
	47	interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
	48	smsc,irq-push-pull;
	49	reg-io-width = <4>;
	50	vddvario-supply = <&d3_3v>;
	51	vdd33a-supply = <&d3_3v>;
1d93a8b5 SS	52
	53	pinctrl-0 = <&lan89218_pins>;
	54	pinctrl-names = "default";
f80b6dfd	55	};
1c7f349a	56
a66f74f4 SS	57	vga-encoder {
	58	compatible = "adi,adv7123";
	59
	60	ports {
	61	#address-cells = <1>;
	62	#size-cells = <0>;
	63
	64	port@0 {
	65	reg = <0>;
	66	adv7123_in: endpoint {
	67	remote-endpoint = <&du_out_rgb1>;
	68	};
	69	};
	70	port@1 {
	71	reg = <1>;
	72	adv7123_out: endpoint {
	73	remote-endpoint = <&vga_in>;
	74	};
	75	};
	76	};
	77	};
	78
	79	hdmi-out {
	80	compatible = "hdmi-connector";
	81	type = "a";
	82
	83	port {
	84	hdmi_con: endpoint {
	85	remote-endpoint = <&adv7511_out>;
	86	};
	87	};
	88	};
	89
	90	vga {
	91	compatible = "vga-connector";
	92
	93	port {
	94	vga_in: endpoint {
	95	remote-endpoint = <&adv7123_out>;
	96	};
	97	};
	98	};
	99
	100	x1_clk: x1 {
	101	compatible = "fixed-clock";
	102	#clock-cells = <0>;
	103	clock-frequency = <74250000>;
	104	};
	105
	106	x2_clk: x2 {
	107	compatible = "fixed-clock";
	108	#clock-cells = <0>;
	109	clock-frequency = <65000000>;
	110	};
	111
1c7f349a SS	112	keyboard {
	113	compatible = "gpio-keys";
	114
	115	key-1 {
	116	linux,code = <KEY_1>;
	117	label = "SW2-1";
	118	wakeup-source;
	119	debounce-interval = <20>;
	120	gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
	121	};
	122	key-2 {
	123	linux,code = <KEY_2>;
	124	label = "SW2-2";
	125	wakeup-source;
	126	debounce-interval = <20>;
	127	gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
	128	};
	129	key-3 {
	130	linux,code = <KEY_3>;
	131	label = "SW2-3";
	132	wakeup-source;
	133	debounce-interval = <20>;
	134	gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
	135	};
	136	key-4 {
	137	linux,code = <KEY_4>;
	138	label = "SW2-4";
	139	wakeup-source;
	140	debounce-interval = <20>;
	141	gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
	142	};
	143	key-a {
	144	linux,code = <KEY_A>;
	145	label = "SW24";
	146	wakeup-source;
	147	debounce-interval = <20>;
	148	gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
	149	};
	150	key-b {
	151	linux,code = <KEY_B>;
	152	label = "SW25";
	153	wakeup-source;
	154	debounce-interval = <20>;
	155	gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
	156	};
	157	};
eed3da2c	158
99645357 SS	159	leds {
	160	compatible = "gpio-leds";
	161
	162	led17 {
	163	gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
	164	};
	165	led18 {
	166	gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
	167	};
	168	led19 {
	169	gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
	170	};
	171	led20 {
	172	gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
	173	};
	174	};
	175
eed3da2c SS	176	vcc_sdhi0: regulator-vcc-sdhi0 {
	177	compatible = "regulator-fixed";
	178
	179	regulator-name = "SDHI0 Vcc";
	180	regulator-min-microvolt = <3300000>;
	181	regulator-max-microvolt = <3300000>;
	182
	183	gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
	184	enable-active-high;
	185	};
4018fba4 SS	186	};
	187
	188	&extal_clk {
	189	clock-frequency = <20000000>;
	190	};
	191
38584104 SS	192	&can_clk {
	193	clock-frequency = <48000000>;
	194	};
	195
2cd452d1 SS	196	&pfc {
	197	scif0_pins: scif0 {
	198	groups = "scif0_data";
	199	function = "scif0";
	200	};
	201
	202	scif3_pins: scif3 {
	203	groups = "scif3_data";
	204	function = "scif3";
	205	};
1d93a8b5 SS	206
	207	lan89218_pins: lan89218 {
	208	intc {
	209	groups = "intc_irq0";
	210	function = "intc";
	211	};
	212	lbsc {
	213	groups = "lbsc_ex_cs0";
	214	function = "lbsc";
	215	};
	216	};
38584104 SS	217
	218	can0_pins: can0 {
	219	groups = "can0_data", "can_clk";
	220	function = "can0";
	221	};
eed3da2c SS	222
	223	sdhi0_pins: sdhi0 {
	224	groups = "sdhi0_data4", "sdhi0_ctrl";
	225	function = "sdhi0";
	226	};
a66f74f4 SS	227
	228	du0_pins: du0 {
	229	groups = "du0_rgb888", "du0_sync", "du0_disp";
	230	function = "du0";
	231	};
	232
	233	du1_pins: du1 {
	234	groups = "du1_rgb666", "du1_sync", "du1_disp";
	235	function = "du1";
	236	};
185555ff MV	237
	238	pmic_irq_pins: pmicirq {
	239	groups = "intc_irq2";
	240	function = "intc";
	241	};
2cd452d1 SS	242	};
2cd452d1 SS	243
b27f0399 GU	244	&rwdt {
	245	timeout-sec = <60>;
	246	status = "okay";
	247	};
	248
4018fba4	249	&scif0 {
2cd452d1 SS	250	pinctrl-0 = <&scif0_pins>;
	251	pinctrl-names = "default";
	252
4018fba4 SS	253	status = "okay";
	254	};
	255
	256	&scif3 {
2cd452d1 SS	257	pinctrl-0 = <&scif3_pins>;
	258	pinctrl-names = "default";
	259
4018fba4 SS	260	status = "okay";
4018fba4 SS	261	};
38584104 SS	262
	263	&can0 {
	264	pinctrl-0 = <&can0_pins>;
	265	pinctrl-names = "default";
	266
	267	status = "okay";
	268	};
eed3da2c SS	269
	270	&sdhi0 {
	271	pinctrl-0 = <&sdhi0_pins>;
	272	pinctrl-names = "default";
	273
	274	vmmc-supply = <&vcc_sdhi0>;
	275	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
	276	status = "okay";
	277	};
a66f74f4 SS	278
	279	&i2c1 {
	280	status = "okay";
	281	clock-frequency = <400000>;
	282
	283	hdmi@39 {
	284	compatible = "adi,adv7511w";
	285	reg = <0x39>;
	286	interrupt-parent = <&irqc>;
	287	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
	288
	289	adi,input-depth = <8>;
	290	adi,input-colorspace = "rgb";
	291	adi,input-clock = "1x";
a66f74f4 SS	292
	293	ports {
	294	#address-cells = <1>;
	295	#size-cells = <0>;
	296
	297	port@0 {
	298	reg = <0>;
	299	adv7511_in: endpoint {
	300	remote-endpoint = <&du_out_rgb0>;
	301	};
	302	};
	303
	304	port@1 {
	305	reg = <1>;
	306	adv7511_out: endpoint {
	307	remote-endpoint = <&hdmi_con>;
	308	};
	309	};
	310	};
	311	};
	312	};
	313
72cd625c MV	314	&iic3 {
	315	status = "okay";
	316
	317	pmic@58 {
	318	compatible = "dlg,da9063";
	319	reg = <0x58>;
185555ff MV	320	pinctrl-names = "default";
185555ff MV	321	pinctrl-0 = <&pmic_irq_pins>;
72cd625c MV	322	interrupt-parent = <&irqc>;
	323	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
	324	interrupt-controller;
	325
	326	rtc {
	327	compatible = "dlg,da9063-rtc";
	328	};
	329
	330	wdt {
	331	compatible = "dlg,da9063-watchdog";
	332	};
	333	};
	334	};
	335
a66f74f4 SS	336	&du {
	337	pinctrl-0 = <&du0_pins &du1_pins>;
	338	pinctrl-names = "default";
	339
762dbc44	340	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
a66f74f4 SS	341	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
	342	status = "okay";
	343
	344	ports {
	345	port@0 {
	346	endpoint {
	347	remote-endpoint = <&adv7511_in>;
	348	};
	349	};
	350	port@1 {
	351	endpoint {
	352	remote-endpoint = <&adv7123_in>;
	353	};
	354	};
	355	};
	356	};