]>
Commit | Line | Data |
---|---|---|
dd7c66ac JS |
1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
2 | ||
3 | /dts-v1/; | |
4 | ||
5 | #include <dt-bindings/input/input.h> | |
6 | #include "rk3229.dtsi" | |
7 | ||
8 | / { | |
9 | model = "Mecer Xtreme Mini S6"; | |
10 | compatible = "mecer,xms6", "rockchip,rk3229"; | |
11 | ||
12 | memory@60000000 { | |
13 | device_type = "memory"; | |
14 | reg = <0x60000000 0x40000000>; | |
15 | }; | |
16 | ||
17 | dc_12v: dc-12v-regulator { | |
18 | compatible = "regulator-fixed"; | |
19 | regulator-name = "dc_12v"; | |
20 | regulator-always-on; | |
21 | regulator-boot-on; | |
22 | regulator-min-microvolt = <12000000>; | |
23 | regulator-max-microvolt = <12000000>; | |
24 | }; | |
25 | ||
26 | ext_gmac: ext_gmac { | |
27 | compatible = "fixed-clock"; | |
28 | clock-frequency = <125000000>; | |
29 | clock-output-names = "ext_gmac"; | |
30 | #clock-cells = <0>; | |
31 | }; | |
32 | ||
33 | power-led { | |
34 | compatible = "gpio-leds"; | |
35 | ||
36 | blue { | |
37 | gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; | |
38 | default-state = "on"; | |
39 | }; | |
40 | }; | |
41 | ||
42 | vcc_host: vcc-host-regulator { | |
43 | compatible = "regulator-fixed"; | |
44 | enable-active-high; | |
45 | gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; | |
46 | pinctrl-names = "default"; | |
47 | pinctrl-0 = <&host_vbus_drv>; | |
48 | regulator-name = "vcc_host"; | |
49 | regulator-always-on; | |
50 | regulator-boot-on; | |
51 | vin-supply = <&vcc_sys>; | |
52 | }; | |
53 | ||
54 | vcc_phy: vcc-phy-regulator { | |
55 | compatible = "regulator-fixed"; | |
56 | enable-active-high; | |
57 | regulator-name = "vcc_phy"; | |
58 | regulator-min-microvolt = <1800000>; | |
59 | regulator-max-microvolt = <1800000>; | |
60 | regulator-always-on; | |
61 | regulator-boot-on; | |
62 | vin-supply = <&vccio_1v8>; | |
63 | }; | |
64 | ||
65 | vcc_sys: vcc-sys-regulator { | |
66 | compatible = "regulator-fixed"; | |
67 | regulator-name = "vcc_sys"; | |
68 | regulator-always-on; | |
69 | regulator-boot-on; | |
70 | regulator-min-microvolt = <5000000>; | |
71 | regulator-max-microvolt = <5000000>; | |
72 | vin-supply = <&dc_12v>; | |
73 | }; | |
74 | ||
75 | vccio_1v8: vccio-1v8-regulator { | |
76 | compatible = "regulator-fixed"; | |
77 | regulator-name = "vccio_1v8"; | |
78 | regulator-min-microvolt = <1800000>; | |
79 | regulator-max-microvolt = <1800000>; | |
80 | regulator-always-on; | |
81 | vin-supply = <&vcc_sys>; | |
82 | }; | |
83 | ||
84 | vccio_3v3: vccio-3v3-regulator { | |
85 | compatible = "regulator-fixed"; | |
86 | regulator-name = "vccio_3v3"; | |
87 | regulator-min-microvolt = <3300000>; | |
88 | regulator-max-microvolt = <3300000>; | |
89 | regulator-always-on; | |
90 | vin-supply = <&vcc_sys>; | |
91 | }; | |
92 | ||
93 | vdd_arm: vdd-arm-regulator { | |
94 | compatible = "pwm-regulator"; | |
95 | pwms = <&pwm1 0 25000 1>; | |
96 | pwm-supply = <&vcc_sys>; | |
97 | regulator-name = "vdd_arm"; | |
98 | regulator-min-microvolt = <950000>; | |
99 | regulator-max-microvolt = <1400000>; | |
100 | regulator-always-on; | |
101 | regulator-boot-on; | |
102 | }; | |
103 | ||
104 | vdd_log: vdd-log-regulator { | |
105 | compatible = "pwm-regulator"; | |
106 | pwms = <&pwm2 0 25000 1>; | |
107 | pwm-supply = <&vcc_sys>; | |
108 | regulator-name = "vdd_log"; | |
109 | regulator-min-microvolt = <1000000>; | |
110 | regulator-max-microvolt = <1300000>; | |
111 | regulator-always-on; | |
112 | regulator-boot-on; | |
113 | }; | |
114 | }; | |
115 | ||
116 | &cpu0 { | |
117 | cpu-supply = <&vdd_arm>; | |
118 | }; | |
119 | ||
120 | &cpu1 { | |
121 | cpu-supply = <&vdd_arm>; | |
122 | }; | |
123 | ||
124 | &cpu2 { | |
125 | cpu-supply = <&vdd_arm>; | |
126 | }; | |
127 | ||
128 | &cpu3 { | |
129 | cpu-supply = <&vdd_arm>; | |
130 | }; | |
131 | ||
132 | &emmc { | |
133 | cap-mmc-highspeed; | |
134 | disable-wp; | |
135 | non-removable; | |
136 | status = "okay"; | |
137 | }; | |
138 | ||
139 | &gmac { | |
140 | assigned-clocks = <&cru SCLK_MAC_SRC>; | |
141 | assigned-clock-rates = <50000000>; | |
142 | clock_in_out = "output"; | |
143 | phy-handle = <&phy>; | |
144 | phy-mode = "rmii"; | |
145 | phy-supply = <&vcc_phy>; | |
146 | status = "okay"; | |
147 | ||
148 | mdio { | |
149 | compatible = "snps,dwmac-mdio"; | |
150 | #address-cells = <1>; | |
151 | #size-cells = <0>; | |
152 | ||
621c8d0c | 153 | phy: ethernet-phy@0 { |
dd7c66ac JS |
154 | compatible = "ethernet-phy-id1234.d400", |
155 | "ethernet-phy-ieee802.3-c22"; | |
156 | reg = <0>; | |
157 | clocks = <&cru SCLK_MAC_PHY>; | |
158 | phy-is-integrated; | |
159 | resets = <&cru SRST_MACPHY>; | |
160 | }; | |
161 | }; | |
162 | }; | |
163 | ||
164 | &gpu { | |
165 | mali-supply = <&vdd_log>; | |
166 | status = "okay"; | |
167 | }; | |
168 | ||
169 | &hdmi { | |
170 | status = "okay"; | |
171 | }; | |
172 | ||
173 | &hdmi_phy { | |
174 | status = "okay"; | |
175 | }; | |
176 | ||
177 | &iep_mmu { | |
178 | status = "okay"; | |
179 | }; | |
180 | ||
181 | &io_domains { | |
182 | status = "okay"; | |
183 | ||
184 | vccio1-supply = <&vccio_3v3>; | |
185 | vccio2-supply = <&vccio_1v8>; | |
186 | vccio4-supply = <&vccio_3v3>; | |
187 | }; | |
188 | ||
189 | &pinctrl { | |
190 | usb { | |
191 | host_vbus_drv: host-vbus-drv { | |
192 | rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; | |
193 | }; | |
194 | }; | |
195 | }; | |
196 | ||
197 | &pwm1 { | |
198 | status = "okay"; | |
199 | }; | |
200 | ||
201 | &pwm2 { | |
202 | status = "okay"; | |
203 | }; | |
204 | ||
205 | &sdmmc { | |
206 | cap-mmc-highspeed; | |
207 | disable-wp; | |
208 | status = "okay"; | |
209 | }; | |
210 | ||
211 | &tsadc { | |
212 | rockchip,hw-tshut-mode = <0>; | |
213 | status = "okay"; | |
214 | }; | |
215 | ||
216 | &u2phy0 { | |
217 | status = "okay"; | |
218 | ||
219 | u2phy0_host: host-port { | |
220 | phy-supply = <&vcc_host>; | |
221 | status = "okay"; | |
222 | }; | |
223 | ||
224 | u2phy0_otg: otg-port { | |
225 | phy-supply = <&vcc_host>; | |
226 | status = "okay"; | |
227 | }; | |
228 | }; | |
229 | ||
230 | &u2phy1 { | |
231 | status = "okay"; | |
232 | ||
233 | u2phy1_host: host-port { | |
234 | phy-supply = <&vcc_host>; | |
235 | status = "okay"; | |
236 | }; | |
237 | ||
238 | u2phy1_otg: otg-port { | |
239 | phy-supply = <&vcc_host>; | |
240 | status = "okay"; | |
241 | }; | |
242 | }; | |
243 | ||
244 | &uart2 { | |
245 | pinctrl-0 = <&uart21_xfer>; | |
246 | status = "okay"; | |
247 | }; | |
248 | ||
249 | &usb_host0_ehci { | |
250 | status = "okay"; | |
251 | }; | |
252 | ||
253 | &usb_host0_ohci { | |
254 | status = "okay"; | |
255 | }; | |
256 | ||
257 | &usb_host1_ehci { | |
258 | status = "okay"; | |
259 | }; | |
260 | ||
261 | &usb_host1_ohci { | |
262 | status = "okay"; | |
263 | }; | |
264 | ||
265 | &usb_host2_ehci { | |
266 | status = "okay"; | |
267 | }; | |
268 | ||
269 | &usb_host2_ohci { | |
270 | status = "okay"; | |
271 | }; | |
272 | ||
273 | &usb_otg { | |
274 | status = "okay"; | |
275 | }; | |
276 | ||
277 | &vop { | |
278 | status = "okay"; | |
279 | }; | |
280 | ||
281 | &vop_mmu { | |
282 | status = "okay"; | |
283 | }; |