[thirdparty/kernel/linux.git] / arch / arm / boot / dts / tegra124-nyan.dtsi

// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
#include "tegra124.dtsi"

/ {
	aliases {
		rtc0 = "/i2c@7000d000/pmic@40";
		rtc1 = "/rtc@7000e000";
		serial0 = &uarta;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory {
		reg = <0x0 0x80000000 0x0 0x80000000>;
	};

	host1x@50000000 {
		hdmi@54280000 {
			status = "okay";

			vdd-supply = <&vdd_3v3_hdmi>;
			pll-supply = <&vdd_hdmi_pll>;
			hdmi-supply = <&vdd_5v0_hdmi>;

			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
			nvidia,hpd-gpio =
				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
		};

		sor@54540000 {
			status = "okay";

			nvidia,dpaux = <&dpaux>;
			nvidia,panel = <&panel>;
		};

		dpaux@545c0000 {
			vdd-supply = <&vdd_3v3_panel>;
			status = "okay";
		};
	};

	gpu@0,57000000 {
		status = "okay";

		vdd-supply = <&vdd_gpu>;
	};

	serial@70006000 {
		/* Debug connector on the bottom of the board near SD card. */
		status = "okay";
	};

	pwm@7000a000 {
		status = "okay";
	};

	i2c@7000c000 {
		status = "okay";
		clock-frequency = <100000>;

		acodec: audio-codec@10 {
			compatible = "maxim,max98090";
			reg = <0x10>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
		};

		temperature-sensor@4c {
			compatible = "ti,tmp451";
			reg = <0x4c>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;

			#thermal-sensor-cells = <1>;
		};
	};

	i2c@7000c400 {
		status = "okay";
		clock-frequency = <100000>;

		trackpad@15 {
			compatible = "elan,ekth3000";
			reg = <0x15>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
			wakeup-source;
		};
	};

	i2c@7000c500 {
		status = "okay";
		clock-frequency = <400000>;

		tpm@20 {
			compatible = "infineon,slb9645tt";
			reg = <0x20>;
		};
	};

	hdmi_ddc: i2c@7000c700 {
		status = "okay";
		clock-frequency = <100000>;
	};

	i2c@7000d000 {
		status = "okay";
		clock-frequency = <400000>;

		pmic: pmic@40 {
			compatible = "ams,as3722";
			reg = <0x40>;
			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;

			ams,system-power-controller;

			#interrupt-cells = <2>;
			interrupt-controller;

			gpio-controller;
			#gpio-cells = <2>;

			pinctrl-names = "default";
			pinctrl-0 = <&as3722_default>;

			as3722_default: pinmux {
				gpio0 {
					pins = "gpio0";
					function = "gpio";
					bias-pull-down;
				};

				gpio1 {
					pins = "gpio1";
					function = "gpio";
					bias-pull-up;
				};

				gpio2_4_7 {
					pins = "gpio2", "gpio4", "gpio7";
					function = "gpio";
					bias-pull-up;
				};

				gpio3_6 {
					pins = "gpio3", "gpio6";
					bias-high-impedance;
				};

				gpio5 {
					pins = "gpio5";
					function = "clk32k-out";
					bias-pull-down;
				};
			};

			regulators {
				vsup-sd2-supply = <&vdd_5v0_sys>;
				vsup-sd3-supply = <&vdd_5v0_sys>;
				vsup-sd4-supply = <&vdd_5v0_sys>;
				vsup-sd5-supply = <&vdd_5v0_sys>;
				vin-ldo0-supply = <&vdd_1v35_lp0>;
				vin-ldo1-6-supply = <&vdd_3v3_run>;
				vin-ldo2-5-7-supply = <&vddio_1v8>;
				vin-ldo3-4-supply = <&vdd_3v3_sys>;
				vin-ldo9-10-supply = <&vdd_5v0_sys>;
				vin-ldo11-supply = <&vdd_3v3_run>;

				vdd_cpu: sd0 {
					regulator-name = "+VDD_CPU_AP";
					regulator-min-microvolt = <700000>;
					regulator-max-microvolt = <1350000>;
					regulator-min-microamp = <3500000>;
					regulator-max-microamp = <3500000>;
					regulator-always-on;
					regulator-boot-on;
					ams,ext-control = <2>;
				};

				sd1 {
					regulator-name = "+VDD_CORE";
					regulator-min-microvolt = <700000>;
					regulator-max-microvolt = <1350000>;
					regulator-min-microamp = <2500000>;
					regulator-max-microamp = <4000000>;
					regulator-always-on;
					regulator-boot-on;
					ams,ext-control = <1>;
				};

				vdd_1v35_lp0: sd2 {
					regulator-name = "+1.35V_LP0(sd2)";
					regulator-min-microvolt = <1350000>;
					regulator-max-microvolt = <1350000>;
					regulator-always-on;
					regulator-boot-on;
				};

				sd3 {
					regulator-name = "+1.35V_LP0(sd3)";
					regulator-min-microvolt = <1350000>;
					regulator-max-microvolt = <1350000>;
					regulator-always-on;
					regulator-boot-on;
				};

				vdd_1v05_run: sd4 {
					regulator-name = "+1.05V_RUN";
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
				};

				vddio_1v8: sd5 {
					regulator-name = "+1.8V_VDDIO";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				vdd_gpu: sd6 {
					regulator-name = "+VDD_GPU_AP";
					regulator-min-microvolt = <650000>;
					regulator-max-microvolt = <1200000>;
					regulator-min-microamp = <3500000>;
					regulator-max-microamp = <3500000>;
					regulator-boot-on;
					regulator-always-on;
				};

				avdd_1v05_run: ldo0 {
					regulator-name = "+1.05V_RUN_AVDD";
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
					regulator-boot-on;
					regulator-always-on;
					ams,ext-control = <1>;
				};

				ldo1 {
					regulator-name = "+1.8V_RUN_CAM";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				ldo2 {
					regulator-name = "+1.2V_GEN_AVDD";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-boot-on;
					regulator-always-on;
				};

				ldo3 {
					regulator-name = "+1.00V_LP0_VDD_RTC";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-boot-on;
					regulator-always-on;
					ams,enable-tracking;
				};

				vdd_run_cam: ldo4 {
					regulator-name = "+3.3V_RUN_CAM";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo5 {
					regulator-name = "+1.2V_RUN_CAM_FRONT";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				vddio_sdmmc3: ldo6 {
					regulator-name = "+VDDIO_SDMMC3";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo7 {
					regulator-name = "+1.05V_RUN_CAM_REAR";
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
				};

				ldo9 {
					regulator-name = "+2.8V_RUN_TOUCH";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo10 {
					regulator-name = "+2.8V_RUN_CAM_AF";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo11 {
					regulator-name = "+1.8V_RUN_VPP_FUSE";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};
			};
		};
	};

	spi@7000d400 {
		status = "okay";

		cros_ec: cros-ec@0 {
			compatible = "google,cros-ec-spi";
			spi-max-frequency = <3000000>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
			reg = <0>;

			google,cros-ec-spi-msg-delay = <2000>;

			i2c-tunnel {
				compatible = "google,cros-ec-i2c-tunnel";
				#address-cells = <1>;
				#size-cells = <0>;

				google,remote-bus = <0>;

				charger: bq24735@9 {
					compatible = "ti,bq24735";
					reg = <0x9>;
					interrupt-parent = <&gpio>;
					interrupts = <TEGRA_GPIO(J, 0)
							IRQ_TYPE_EDGE_BOTH>;
					ti,ac-detect-gpios = <&gpio
							TEGRA_GPIO(J, 0)
							GPIO_ACTIVE_HIGH>;
					ti,external-control;
				};

				battery: sbs-battery@b {
					compatible = "sbs,sbs-battery";
					reg = <0xb>;
					sbs,i2c-retry-count = <2>;
					sbs,poll-retry-count = <10>;
					power-supplies = <&charger>;
				};
			};
		};
	};

	spi@7000da00 {
		status = "okay";
		spi-max-frequency = <25000000>;

		flash@0 {
			compatible = "winbond,w25q32dw";
			spi-max-frequency = <25000000>;
			reg = <0>;
		};
	};

	pmc@7000e400 {
		nvidia,invert-interrupt;
		nvidia,suspend-mode = <0>;
		nvidia,cpu-pwr-good-time = <500>;
		nvidia,cpu-pwr-off-time = <300>;
		nvidia,core-pwr-good-time = <641 3845>;
		nvidia,core-pwr-off-time = <61036>;
		nvidia,core-power-req-active-high;
		nvidia,sys-clock-req-active-high;
	};

	hda@70030000 {
		status = "okay";
	};

	usb@70090000 {
		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";

		avddio-pex-supply = <&vdd_1v05_run>;
		dvddio-pex-supply = <&vdd_1v05_run>;
		avdd-usb-supply = <&vdd_3v3_lp0>;
		avdd-pll-utmip-supply = <&vddio_1v8>;
		avdd-pll-erefe-supply = <&avdd_1v05_run>;
		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;

		status = "okay";
	};

	padctl@7009f000 {
		status = "okay";

		pads {
			usb2 {
				status = "okay";

				lanes {
					usb2-0 {
						nvidia,function = "xusb";
						status = "okay";
					};

					usb2-1 {
						nvidia,function = "xusb";
						status = "okay";
					};

					usb2-2 {
						nvidia,function = "xusb";
						status = "okay";
					};
				};
			};

			pcie {
				status = "okay";

				lanes {
					pcie-0 {
						nvidia,function = "usb3-ss";
						status = "okay";
					};

					pcie-1 {
						nvidia,function = "usb3-ss";
						status = "okay";
					};
				};
			};
		};

		ports {
			usb2-0 {
				vbus-supply = <&vdd_usb1_vbus>;
				status = "okay";
				mode = "otg";
			};

			usb2-1 {
				vbus-supply = <&vdd_run_cam>;
				status = "okay";
				mode = "host";
			};

			usb2-2 {
				vbus-supply = <&vdd_usb3_vbus>;
				status = "okay";
				mode = "host";
			};

			usb3-0 {
				nvidia,usb2-companion = <0>;
				status = "okay";
			};

			usb3-1 {
				nvidia,usb2-companion = <1>;
				status = "okay";
			};
		};
	};

	sdhci0_pwrseq: sdhci0_pwrseq {
		compatible = "mmc-pwrseq-simple";

		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
	};

	sdhci@700b0000 { /* WiFi/BT on this bus */
		status = "okay";
		bus-width = <4>;
		no-1-8-v;
		non-removable;
		mmc-pwrseq = <&sdhci0_pwrseq>;
		vmmc-supply = <&vdd_3v3_lp0>;
		vqmmc-supply = <&vddio_1v8>;
		keep-power-in-suspend;
	};

	sdhci@700b0400 { /* SD Card on this bus */
		status = "okay";
		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
		bus-width = <4>;
		no-1-8-v;
		vqmmc-supply = <&vddio_sdmmc3>;
	};

	sdhci@700b0600 { /* eMMC on this bus */
		status = "okay";
		bus-width = <8>;
		no-1-8-v;
		non-removable;
	};

	/* CPU DFLL clock */
	clock@70110000 {
		status = "disabled";
		vdd-cpu-supply = <&vdd_cpu>;
		nvidia,i2c-fs-rate = <400000>;
	};

	ahub@70300000 {
		i2s@70301100 {
			status = "okay";
		};
	};

	backlight: backlight {
		compatible = "pwm-backlight";

		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
		power-supply = <&vdd_led>;
		pwms = <&pwm 1 1000000>;

		default-brightness-level = <224>;
		brightness-levels =
			<  0   1   2   3   4   5   6   7
			   8   9  10  11  12  13  14  15
			  16  17  18  19  20  21  22  23
			  24  25  26  27  28  29  30  31
			  32  33  34  35  36  37  38  39
			  40  41  42  43  44  45  46  47
			  48  49  50  51  52  53  54  55
			  56  57  58  59  60  61  62  63
			  64  65  66  67  68  69  70  71
			  72  73  74  75  76  77  78  79
			  80  81  82  83  84  85  86  87
			  88  89  90  91  92  93  94  95
			  96  97  98  99 100 101 102 103
			 104 105 106 107 108 109 110 111
			 112 113 114 115 116 117 118 119
			 120 121 122 123 124 125 126 127
			 128 129 130 131 132 133 134 135
			 136 137 138 139 140 141 142 143
			 144 145 146 147 148 149 150 151
			 152 153 154 155 156 157 158 159
			 160 161 162 163 164 165 166 167
			 168 169 170 171 172 173 174 175
			 176 177 178 179 180 181 182 183
			 184 185 186 187 188 189 190 191
			 192 193 194 195 196 197 198 199
			 200 201 202 203 204 205 206 207
			 208 209 210 211 212 213 214 215
			 216 217 218 219 220 221 222 223
			 224 225 226 227 228 229 230 231
			 232 233 234 235 236 237 238 239
			 240 241 242 243 244 245 246 247
			 248 249 250 251 252 253 254 255
			 256>;
	};

	clocks {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		clk32k_in: clock@0 {
			compatible = "fixed-clock";
			reg = <0>;
			#clock-cells = <0>;
			clock-frequency = <32768>;
		};
	};

	cpus {
		cpu@0 {
			vdd-cpu-supply = <&vdd_cpu>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		lid {
			label = "Lid";
			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
			linux,input-type = <5>;
			linux,code = <KEY_RESERVED>;
			debounce-interval = <1>;
			wakeup-source;
		};

		power {
			label = "Power";
			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
			linux,code = <KEY_POWER>;
			debounce-interval = <30>;
			wakeup-source;
		};
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		vdd_mux: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "+VDD_MUX";
			regulator-min-microvolt = <12000000>;
			regulator-max-microvolt = <12000000>;
			regulator-always-on;
			regulator-boot-on;
		};

		vdd_5v0_sys: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "+5V_SYS";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-always-on;
			regulator-boot-on;
			vin-supply = <&vdd_mux>;
		};

		vdd_3v3_sys: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "+3.3V_SYS";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
			regulator-boot-on;
			vin-supply = <&vdd_mux>;
		};

		vdd_3v3_run: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "+3.3V_RUN";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_3v3_sys>;
		};

		vdd_3v3_hdmi: regulator@4 {
			compatible = "regulator-fixed";
			reg = <4>;
			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			vin-supply = <&vdd_3v3_run>;
		};

		vdd_led: regulator@5 {
			compatible = "regulator-fixed";
			reg = <5>;
			regulator-name = "+VDD_LED";
			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_mux>;
		};

		vdd_5v0_ts: regulator@6 {
			compatible = "regulator-fixed";
			reg = <6>;
			regulator-name = "+5V_VDD_TS_SW";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-boot-on;
			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_5v0_sys>;
		};

		vdd_usb1_vbus: regulator@7 {
			compatible = "regulator-fixed";
			reg = <7>;
			regulator-name = "+5V_USB_HS";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			gpio-open-drain;
			vin-supply = <&vdd_5v0_sys>;
		};

		vdd_usb3_vbus: regulator@8 {
			compatible = "regulator-fixed";
			reg = <8>;
			regulator-name = "+5V_USB_SS";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			gpio-open-drain;
			vin-supply = <&vdd_5v0_sys>;
		};

		vdd_3v3_panel: regulator@9 {
			compatible = "regulator-fixed";
			reg = <9>;
			regulator-name = "+3.3V_PANEL";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_3v3_run>;
		};

		vdd_3v3_lp0: regulator@10 {
			compatible = "regulator-fixed";
			reg = <10>;
			regulator-name = "+3.3V_LP0";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			/*
			 * TODO: find a way to wire this up with the USB EHCI
			 * controllers so that it can be enabled on demand.
			 */
			regulator-always-on;
			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_3v3_sys>;
		};

		vdd_hdmi_pll: regulator@11 {
			compatible = "regulator-fixed";
			reg = <11>;
			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
			regulator-min-microvolt = <1050000>;
			regulator-max-microvolt = <1050000>;
			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
			vin-supply = <&vdd_1v05_run>;
		};

		vdd_5v0_hdmi: regulator@12 {
			compatible = "regulator-fixed";
			reg = <12>;
			regulator-name = "+5V_HDMI_CON";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&vdd_5v0_sys>;
		};
	};

	sound {
		nvidia,audio-routing =
			"Headphones", "HPR",
			"Headphones", "HPL",
			"Speakers", "SPKR",
			"Speakers", "SPKL",
			"Mic Jack", "MICBIAS",
			"DMICL", "Int Mic",
			"DMICR", "Int Mic",
			"IN34", "Mic Jack";

		nvidia,i2s-controller = <&tegra_i2s1>;
		nvidia,audio-codec = <&acodec>;

		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
			 <&tegra_car TEGRA124_CLK_EXTERN1>;
		clock-names = "pll_a", "pll_a_out0", "mclk";

		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
		nvidia,mic-det-gpios =
				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
	};

	gpio-restart {
		compatible = "gpio-restart";
		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
		priority = <200>;
	};
};

#include "cros-ec-keyboard.dtsi"
Commit	Line	Data
b2441318	1	// SPDX-License-Identifier: GPL-2.0
53d02858 TV	2	#include <dt-bindings/input/input.h>
	3	#include "tegra124.dtsi"
	4
	5	/ {
	6	aliases {
b5896f67 MZ	7	rtc0 = "/i2c@7000d000/pmic@40";
b5896f67 MZ	8	rtc1 = "/rtc@7000e000";
53d02858 TV	9	serial0 = &uarta;
	10	};
	11
f5bbb327 JH	12	chosen {
	13	stdout-path = "serial0:115200n8";
	14	};
	15
53d02858 TV	16	memory {
	17	reg = <0x0 0x80000000 0x0 0x80000000>;
	18	};
	19
b5896f67 MZ	20	host1x@50000000 {
b5896f67 MZ	21	hdmi@54280000 {
53d02858 TV	22	status = "okay";
	23
	24	vdd-supply = <&vdd_3v3_hdmi>;
	25	pll-supply = <&vdd_hdmi_pll>;
	26	hdmi-supply = <&vdd_5v0_hdmi>;
	27
	28	nvidia,ddc-i2c-bus = <&hdmi_ddc>;
	29	nvidia,hpd-gpio =
	30	<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
	31	};
	32
b5896f67	33	sor@54540000 {
53d02858 TV	34	status = "okay";
	35
	36	nvidia,dpaux = <&dpaux>;
	37	nvidia,panel = <&panel>;
	38	};
	39
b5896f67	40	dpaux@545c0000 {
53d02858 TV	41	vdd-supply = <&vdd_3v3_panel>;
	42	status = "okay";
	43	};
	44	};
	45
5d831dd5 PK	46	gpu@0,57000000 {
	47	status = "okay";
	48
	49	vdd-supply = <&vdd_gpu>;
	50	};
	51
b5896f67	52	serial@70006000 {
53d02858 TV	53	/* Debug connector on the bottom of the board near SD card. */
	54	status = "okay";
	55	};
	56
b5896f67	57	pwm@7000a000 {
53d02858 TV	58	status = "okay";
	59	};
	60
b5896f67	61	i2c@7000c000 {
53d02858 TV	62	status = "okay";
	63	clock-frequency = <100000>;
	64
	65	acodec: audio-codec@10 {
	66	compatible = "maxim,max98090";
	67	reg = <0x10>;
	68	interrupt-parent = <&gpio>;
38333641	69	interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
53d02858 TV	70	};
	71
	72	temperature-sensor@4c {
	73	compatible = "ti,tmp451";
	74	reg = <0x4c>;
	75	interrupt-parent = <&gpio>;
	76	interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
	77
	78	#thermal-sensor-cells = <1>;
	79	};
	80	};
	81
b5896f67	82	i2c@7000c400 {
53d02858 TV	83	status = "okay";
53d02858 TV	84	clock-frequency = <100000>;
a0b9c1cb TV	85
	86	trackpad@15 {
	87	compatible = "elan,ekth3000";
	88	reg = <0x15>;
	89	interrupt-parent = <&gpio>;
	90	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
	91	wakeup-source;
	92	};
53d02858 TV	93	};
53d02858 TV	94
b5896f67	95	i2c@7000c500 {
53d02858 TV	96	status = "okay";
	97	clock-frequency = <400000>;
	98
	99	tpm@20 {
	100	compatible = "infineon,slb9645tt";
	101	reg = <0x20>;
	102	};
	103	};
	104
b5896f67	105	hdmi_ddc: i2c@7000c700 {
53d02858 TV	106	status = "okay";
	107	clock-frequency = <100000>;
	108	};
	109
b5896f67	110	i2c@7000d000 {
53d02858 TV	111	status = "okay";
	112	clock-frequency = <400000>;
	113
	114	pmic: pmic@40 {
	115	compatible = "ams,as3722";
	116	reg = <0x40>;
	117	interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
	118
	119	ams,system-power-controller;
	120
	121	#interrupt-cells = <2>;
	122	interrupt-controller;
	123
	124	gpio-controller;
	125	#gpio-cells = <2>;
	126
	127	pinctrl-names = "default";
	128	pinctrl-0 = <&as3722_default>;
	129
	130	as3722_default: pinmux {
	131	gpio0 {
	132	pins = "gpio0";
	133	function = "gpio";
	134	bias-pull-down;
	135	};
	136
	137	gpio1 {
	138	pins = "gpio1";
	139	function = "gpio";
	140	bias-pull-up;
	141	};
	142
	143	gpio2_4_7 {
	144	pins = "gpio2", "gpio4", "gpio7";
	145	function = "gpio";
	146	bias-pull-up;
	147	};
	148
	149	gpio3_6 {
	150	pins = "gpio3", "gpio6";
	151	bias-high-impedance;
	152	};
	153
	154	gpio5 {
	155	pins = "gpio5";
	156	function = "clk32k-out";
	157	bias-pull-down;
	158	};
	159	};
	160
	161	regulators {
	162	vsup-sd2-supply = <&vdd_5v0_sys>;
	163	vsup-sd3-supply = <&vdd_5v0_sys>;
	164	vsup-sd4-supply = <&vdd_5v0_sys>;
	165	vsup-sd5-supply = <&vdd_5v0_sys>;
	166	vin-ldo0-supply = <&vdd_1v35_lp0>;
	167	vin-ldo1-6-supply = <&vdd_3v3_run>;
	168	vin-ldo2-5-7-supply = <&vddio_1v8>;
	169	vin-ldo3-4-supply = <&vdd_3v3_sys>;
	170	vin-ldo9-10-supply = <&vdd_5v0_sys>;
	171	vin-ldo11-supply = <&vdd_3v3_run>;
	172
9a0baee9	173	vdd_cpu: sd0 {
53d02858 TV	174	regulator-name = "+VDD_CPU_AP";
	175	regulator-min-microvolt = <700000>;
	176	regulator-max-microvolt = <1350000>;
	177	regulator-min-microamp = <3500000>;
	178	regulator-max-microamp = <3500000>;
	179	regulator-always-on;
	180	regulator-boot-on;
	181	ams,ext-control = <2>;
	182	};
	183
	184	sd1 {
	185	regulator-name = "+VDD_CORE";
	186	regulator-min-microvolt = <700000>;
	187	regulator-max-microvolt = <1350000>;
	188	regulator-min-microamp = <2500000>;
	189	regulator-max-microamp = <4000000>;
	190	regulator-always-on;
	191	regulator-boot-on;
	192	ams,ext-control = <1>;
	193	};
	194
	195	vdd_1v35_lp0: sd2 {
	196	regulator-name = "+1.35V_LP0(sd2)";
	197	regulator-min-microvolt = <1350000>;
	198	regulator-max-microvolt = <1350000>;
	199	regulator-always-on;
	200	regulator-boot-on;
	201	};
	202
	203	sd3 {
	204	regulator-name = "+1.35V_LP0(sd3)";
	205	regulator-min-microvolt = <1350000>;
	206	regulator-max-microvolt = <1350000>;
	207	regulator-always-on;
	208	regulator-boot-on;
	209	};
	210
	211	vdd_1v05_run: sd4 {
	212	regulator-name = "+1.05V_RUN";
	213	regulator-min-microvolt = <1050000>;
	214	regulator-max-microvolt = <1050000>;
	215	};
	216
	217	vddio_1v8: sd5 {
	218	regulator-name = "+1.8V_VDDIO";
	219	regulator-min-microvolt = <1800000>;
	220	regulator-max-microvolt = <1800000>;
53d02858 TV	221	regulator-always-on;
	222	};
	223
5d831dd5	224	vdd_gpu: sd6 {
53d02858 TV	225	regulator-name = "+VDD_GPU_AP";
	226	regulator-min-microvolt = <650000>;
	227	regulator-max-microvolt = <1200000>;
	228	regulator-min-microamp = <3500000>;
	229	regulator-max-microamp = <3500000>;
	230	regulator-boot-on;
	231	regulator-always-on;
	232	};
	233
1333ce4d	234	avdd_1v05_run: ldo0 {
53d02858 TV	235	regulator-name = "+1.05V_RUN_AVDD";
	236	regulator-min-microvolt = <1050000>;
	237	regulator-max-microvolt = <1050000>;
	238	regulator-boot-on;
	239	regulator-always-on;
	240	ams,ext-control = <1>;
	241	};
	242
	243	ldo1 {
	244	regulator-name = "+1.8V_RUN_CAM";
	245	regulator-min-microvolt = <1800000>;
	246	regulator-max-microvolt = <1800000>;
	247	};
	248
	249	ldo2 {
	250	regulator-name = "+1.2V_GEN_AVDD";
	251	regulator-min-microvolt = <1200000>;
	252	regulator-max-microvolt = <1200000>;
	253	regulator-boot-on;
	254	regulator-always-on;
	255	};
	256
	257	ldo3 {
	258	regulator-name = "+1.00V_LP0_VDD_RTC";
	259	regulator-min-microvolt = <1000000>;
	260	regulator-max-microvolt = <1000000>;
	261	regulator-boot-on;
	262	regulator-always-on;
	263	ams,enable-tracking;
	264	};
	265
	266	vdd_run_cam: ldo4 {
	267	regulator-name = "+3.3V_RUN_CAM";
	268	regulator-min-microvolt = <2800000>;
	269	regulator-max-microvolt = <2800000>;
	270	};
	271
	272	ldo5 {
	273	regulator-name = "+1.2V_RUN_CAM_FRONT";
	274	regulator-min-microvolt = <1200000>;
	275	regulator-max-microvolt = <1200000>;
	276	};
	277
	278	vddio_sdmmc3: ldo6 {
	279	regulator-name = "+VDDIO_SDMMC3";
	280	regulator-min-microvolt = <1800000>;
	281	regulator-max-microvolt = <3300000>;
	282	};
	283
	284	ldo7 {
	285	regulator-name = "+1.05V_RUN_CAM_REAR";
	286	regulator-min-microvolt = <1050000>;
	287	regulator-max-microvolt = <1050000>;
	288	};
	289
	290	ldo9 {
	291	regulator-name = "+2.8V_RUN_TOUCH";
	292	regulator-min-microvolt = <2800000>;
	293	regulator-max-microvolt = <2800000>;
	294	};
	295
	296	ldo10 {
	297	regulator-name = "+2.8V_RUN_CAM_AF";
	298	regulator-min-microvolt = <2800000>;
299	regulator-max-microvolt = <2800000>;
300	};
301
302	ldo11 {
303	regulator-name = "+1.8V_RUN_VPP_FUSE";
304	regulator-min-microvolt = <1800000>;
305	regulator-max-microvolt = <1800000>;
306	};
307	};
308	};
309	};
310
b5896f67	311	spi@7000d400 {
53d02858 TV	312	status = "okay";
	313
	314	cros_ec: cros-ec@0 {
	315	compatible = "google,cros-ec-spi";
	316	spi-max-frequency = <3000000>;
	317	interrupt-parent = <&gpio>;
	318	interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
	319	reg = <0>;
	320
	321	google,cros-ec-spi-msg-delay = <2000>;
	322
	323	i2c-tunnel {
	324	compatible = "google,cros-ec-i2c-tunnel";
	325	#address-cells = <1>;
	326	#size-cells = <0>;
	327
	328	google,remote-bus = <0>;
	329
	330	charger: bq24735@9 {
	331	compatible = "ti,bq24735";
	332	reg = <0x9>;
	333	interrupt-parent = <&gpio>;
	334	interrupts = <TEGRA_GPIO(J, 0)
38333641	335	IRQ_TYPE_EDGE_BOTH>;
53d02858 TV	336	ti,ac-detect-gpios = <&gpio
	337	TEGRA_GPIO(J, 0)
	338	GPIO_ACTIVE_HIGH>;
5fc01a99	339	ti,external-control;
53d02858 TV	340	};
	341
	342	battery: sbs-battery@b {
	343	compatible = "sbs,sbs-battery";
	344	reg = <0xb>;
	345	sbs,i2c-retry-count = <2>;
	346	sbs,poll-retry-count = <10>;
	347	power-supplies = <&charger>;
	348	};
	349	};
	350	};
	351	};
	352
b5896f67	353	spi@7000da00 {
53d02858 TV	354	status = "okay";
	355	spi-max-frequency = <25000000>;
	356
	357	flash@0 {
	358	compatible = "winbond,w25q32dw";
97e147e8	359	spi-max-frequency = <25000000>;
53d02858 TV	360	reg = <0>;
	361	};
	362	};
	363
b5896f67	364	pmc@7000e400 {
53d02858 TV	365	nvidia,invert-interrupt;
	366	nvidia,suspend-mode = <0>;
	367	nvidia,cpu-pwr-good-time = <500>;
	368	nvidia,cpu-pwr-off-time = <300>;
	369	nvidia,core-pwr-good-time = <641 3845>;
	370	nvidia,core-pwr-off-time = <61036>;
	371	nvidia,core-power-req-active-high;
	372	nvidia,sys-clock-req-active-high;
	373	};
	374
b5896f67	375	hda@70030000 {
53d02858 TV	376	status = "okay";
	377	};
	378
b5896f67 MZ	379	usb@70090000 {
	380	phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
	381	<&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
	382	<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
	383	<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
	384	<&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
1333ce4d TR	385	phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
	386
	387	avddio-pex-supply = <&vdd_1v05_run>;
	388	dvddio-pex-supply = <&vdd_1v05_run>;
	389	avdd-usb-supply = <&vdd_3v3_lp0>;
	390	avdd-pll-utmip-supply = <&vddio_1v8>;
	391	avdd-pll-erefe-supply = <&avdd_1v05_run>;
	392	avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
	393	hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
	394	hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
	395
	396	status = "okay";
	397	};
	398
b5896f67	399	padctl@7009f000 {
1333ce4d TR	400	status = "okay";
	401
	402	pads {
	403	usb2 {
	404	status = "okay";
	405
	406	lanes {
	407	usb2-0 {
	408	nvidia,function = "xusb";
	409	status = "okay";
	410	};
	411
	412	usb2-1 {
	413	nvidia,function = "xusb";
	414	status = "okay";
	415	};
	416
	417	usb2-2 {
	418	nvidia,function = "xusb";
	419	status = "okay";
	420	};
	421	};
	422	};
	423
	424	pcie {
	425	status = "okay";
	426
	427	lanes {
	428	pcie-0 {
	429	nvidia,function = "usb3-ss";
	430	status = "okay";
	431	};
	432
	433	pcie-1 {
	434	nvidia,function = "usb3-ss";
	435	status = "okay";
	436	};
	437	};
	438	};
	439	};
	440
	441	ports {
	442	usb2-0 {
	443	vbus-supply = <&vdd_usb1_vbus>;
	444	status = "okay";
	445	mode = "otg";
	446	};
	447
	448	usb2-1 {
	449	vbus-supply = <&vdd_run_cam>;
	450	status = "okay";
	451	mode = "host";
	452	};
	453
	454	usb2-2 {
	455	vbus-supply = <&vdd_usb3_vbus>;
	456	status = "okay";
	457	mode = "host";
	458	};
	459
	460	usb3-0 {
	461	nvidia,usb2-companion = <0>;
	462	status = "okay";
	463	};
464
465	usb3-1 {
466	nvidia,usb2-companion = <1>;
467	status = "okay";
468	};
469	};
470	};
471
1d1690b8 TV	472	sdhci0_pwrseq: sdhci0_pwrseq {
	473	compatible = "mmc-pwrseq-simple";
	474
	475	reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
	476	};
	477
b5896f67	478	sdhci@700b0000 { /* WiFi/BT on this bus */
53d02858	479	status = "okay";
53d02858 TV	480	bus-width = <4>;
	481	no-1-8-v;
	482	non-removable;
1d1690b8 TV	483	mmc-pwrseq = <&sdhci0_pwrseq>;
	484	vmmc-supply = <&vdd_3v3_lp0>;
	485	vqmmc-supply = <&vddio_1v8>;
160b2dd7	486	keep-power-in-suspend;
53d02858 TV	487	};
53d02858 TV	488
b5896f67	489	sdhci@700b0400 { /* SD Card on this bus */
53d02858 TV	490	status = "okay";
	491	cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
	492	power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
	493	bus-width = <4>;
	494	no-1-8-v;
	495	vqmmc-supply = <&vddio_sdmmc3>;
	496	};
	497
b5896f67	498	sdhci@700b0600 { /* eMMC on this bus */
53d02858 TV	499	status = "okay";
	500	bus-width = <8>;
	501	no-1-8-v;
	502	non-removable;
	503	};
	504
9a0baee9	505	/* CPU DFLL clock */
b5896f67	506	clock@70110000 {
80373d37	507	status = "disabled";
9a0baee9 JH	508	vdd-cpu-supply = <&vdd_cpu>;
	509	nvidia,i2c-fs-rate = <400000>;
	510	};
	511
b5896f67 MZ	512	ahub@70300000 {
b5896f67 MZ	513	i2s@70301100 {
53d02858 TV	514	status = "okay";
	515	};
	516	};
	517
53d02858 TV	518	backlight: backlight {
	519	compatible = "pwm-backlight";
	520
	521	enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
	522	power-supply = <&vdd_led>;
	523	pwms = <&pwm 1 1000000>;
	524
	525	default-brightness-level = <224>;
	526	brightness-levels =
	527	< 0 1 2 3 4 5 6 7
	528	8 9 10 11 12 13 14 15
	529	16 17 18 19 20 21 22 23
	530	24 25 26 27 28 29 30 31
	531	32 33 34 35 36 37 38 39
	532	40 41 42 43 44 45 46 47
	533	48 49 50 51 52 53 54 55
	534	56 57 58 59 60 61 62 63
	535	64 65 66 67 68 69 70 71
	536	72 73 74 75 76 77 78 79
	537	80 81 82 83 84 85 86 87
	538	88 89 90 91 92 93 94 95
	539	96 97 98 99 100 101 102 103
	540	104 105 106 107 108 109 110 111
	541	112 113 114 115 116 117 118 119
	542	120 121 122 123 124 125 126 127
	543	128 129 130 131 132 133 134 135
	544	136 137 138 139 140 141 142 143
	545	144 145 146 147 148 149 150 151
	546	152 153 154 155 156 157 158 159
	547	160 161 162 163 164 165 166 167
	548	168 169 170 171 172 173 174 175
	549	176 177 178 179 180 181 182 183
	550	184 185 186 187 188 189 190 191
	551	192 193 194 195 196 197 198 199
	552	200 201 202 203 204 205 206 207
	553	208 209 210 211 212 213 214 215
	554	216 217 218 219 220 221 222 223
	555	224 225 226 227 228 229 230 231
	556	232 233 234 235 236 237 238 239
	557	240 241 242 243 244 245 246 247
	558	248 249 250 251 252 253 254 255
	559	256>;
	560	};
	561
	562	clocks {
	563	compatible = "simple-bus";
	564	#address-cells = <1>;
	565	#size-cells = <0>;
	566
	567	clk32k_in: clock@0 {
	568	compatible = "fixed-clock";
	569	reg = <0>;
	570	#clock-cells = <0>;
	571	clock-frequency = <32768>;
	572	};
	573	};
	574
9a0baee9 JH	575	cpus {
	576	cpu@0 {
	577	vdd-cpu-supply = <&vdd_cpu>;
	578	};
	579	};
	580
53d02858 TV	581	gpio-keys {
	582	compatible = "gpio-keys";
	583
	584	lid {
	585	label = "Lid";
	586	gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
	587	linux,input-type = <5>;
	588	linux,code = <KEY_RESERVED>;
	589	debounce-interval = <1>;
d1c04d30	590	wakeup-source;
53d02858 TV	591	};
	592
	593	power {
	594	label = "Power";
	595	gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
	596	linux,code = <KEY_POWER>;
	597	debounce-interval = <30>;
d1c04d30	598	wakeup-source;
53d02858 TV	599	};
	600	};
	601
	602	regulators {
	603	compatible = "simple-bus";
	604	#address-cells = <1>;
	605	#size-cells = <0>;
	606
	607	vdd_mux: regulator@0 {
	608	compatible = "regulator-fixed";
	609	reg = <0>;
	610	regulator-name = "+VDD_MUX";
	611	regulator-min-microvolt = <12000000>;
	612	regulator-max-microvolt = <12000000>;
	613	regulator-always-on;
	614	regulator-boot-on;
	615	};
	616
	617	vdd_5v0_sys: regulator@1 {
	618	compatible = "regulator-fixed";
	619	reg = <1>;
	620	regulator-name = "+5V_SYS";
	621	regulator-min-microvolt = <5000000>;
	622	regulator-max-microvolt = <5000000>;
	623	regulator-always-on;
	624	regulator-boot-on;
	625	vin-supply = <&vdd_mux>;
	626	};
	627
	628	vdd_3v3_sys: regulator@2 {
	629	compatible = "regulator-fixed";
	630	reg = <2>;
	631	regulator-name = "+3.3V_SYS";
	632	regulator-min-microvolt = <3300000>;
	633	regulator-max-microvolt = <3300000>;
	634	regulator-always-on;
	635	regulator-boot-on;
	636	vin-supply = <&vdd_mux>;
	637	};
	638
	639	vdd_3v3_run: regulator@3 {
	640	compatible = "regulator-fixed";
	641	reg = <3>;
	642	regulator-name = "+3.3V_RUN";
	643	regulator-min-microvolt = <3300000>;
	644	regulator-max-microvolt = <3300000>;
	645	regulator-always-on;
	646	regulator-boot-on;
	647	gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
	648	enable-active-high;
	649	vin-supply = <&vdd_3v3_sys>;
	650	};
	651
	652	vdd_3v3_hdmi: regulator@4 {
	653	compatible = "regulator-fixed";
	654	reg = <4>;
	655	regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
	656	regulator-min-microvolt = <3300000>;
	657	regulator-max-microvolt = <3300000>;
	658	vin-supply = <&vdd_3v3_run>;
	659	};
	660
	661	vdd_led: regulator@5 {
	662	compatible = "regulator-fixed";
663	reg = <5>;
664	regulator-name = "+VDD_LED";
665	gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
666	enable-active-high;
667	vin-supply = <&vdd_mux>;
668	};
669
670	vdd_5v0_ts: regulator@6 {
671	compatible = "regulator-fixed";
672	reg = <6>;
673	regulator-name = "+5V_VDD_TS_SW";
674	regulator-min-microvolt = <5000000>;
675	regulator-max-microvolt = <5000000>;
676	regulator-boot-on;
677	gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
678	enable-active-high;
679	vin-supply = <&vdd_5v0_sys>;
680	};
681
682	vdd_usb1_vbus: regulator@7 {
683	compatible = "regulator-fixed";
684	reg = <7>;
685	regulator-name = "+5V_USB_HS";
686	regulator-min-microvolt = <5000000>;
687	regulator-max-microvolt = <5000000>;
688	gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
689	enable-active-high;
690	gpio-open-drain;
691	vin-supply = <&vdd_5v0_sys>;
692	};
693
694	vdd_usb3_vbus: regulator@8 {
695	compatible = "regulator-fixed";
696	reg = <8>;
697	regulator-name = "+5V_USB_SS";
698	regulator-min-microvolt = <5000000>;
699	regulator-max-microvolt = <5000000>;
700	gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
701	enable-active-high;
702	gpio-open-drain;
703	vin-supply = <&vdd_5v0_sys>;
704	};
705
706	vdd_3v3_panel: regulator@9 {
707	compatible = "regulator-fixed";
708	reg = <9>;
709	regulator-name = "+3.3V_PANEL";
710	regulator-min-microvolt = <3300000>;
711	regulator-max-microvolt = <3300000>;
712	gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
713	enable-active-high;
714	vin-supply = <&vdd_3v3_run>;
715	};
716
717	vdd_3v3_lp0: regulator@10 {
718	compatible = "regulator-fixed";
719	reg = <10>;
720	regulator-name = "+3.3V_LP0";
721	regulator-min-microvolt = <3300000>;
722	regulator-max-microvolt = <3300000>;
723	/*
724	* TODO: find a way to wire this up with the USB EHCI
725	* controllers so that it can be enabled on demand.
726	*/
727	regulator-always-on;
728	gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
729	enable-active-high;
730	vin-supply = <&vdd_3v3_sys>;
731	};
732
733	vdd_hdmi_pll: regulator@11 {
734	compatible = "regulator-fixed";
735	reg = <11>;
736	regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
737	regulator-min-microvolt = <1050000>;
738	regulator-max-microvolt = <1050000>;
739	gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
740	vin-supply = <&vdd_1v05_run>;
741	};
742
743	vdd_5v0_hdmi: regulator@12 {
744	compatible = "regulator-fixed";
745	reg = <12>;
746	regulator-name = "+5V_HDMI_CON";
747	regulator-min-microvolt = <5000000>;
748	regulator-max-microvolt = <5000000>;
749	gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
750	enable-active-high;
751	vin-supply = <&vdd_5v0_sys>;
752	};
753	};
754
755	sound {
756	nvidia,audio-routing =
757	"Headphones", "HPR",
758	"Headphones", "HPL",
759	"Speakers", "SPKR",
760	"Speakers", "SPKL",
761	"Mic Jack", "MICBIAS",
762	"DMICL", "Int Mic",
763	"DMICR", "Int Mic",
764	"IN34", "Mic Jack";
765
766	nvidia,i2s-controller = <&tegra_i2s1>;
767	nvidia,audio-codec = <&acodec>;
768
769	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
770	<&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
771	<&tegra_car TEGRA124_CLK_EXTERN1>;
772	clock-names = "pll_a", "pll_a_out0", "mclk";
773
774	nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
775	nvidia,mic-det-gpios =
776	<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
777	};
1755de86 TV	778
	779	gpio-restart {
	780	compatible = "gpio-restart";
	781	gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
	782	priority = <200>;
	783	};
53d02858 TV	784	};
	785
	786	#include "cros-ec-keyboard.dtsi"