]>
Commit | Line | Data |
---|---|---|
60df809f HS |
1 | // SPDX-License-Identifier: GPL-2.0+ |
2 | /* | |
3 | * Copyright (C) 2017 B&R Industrial Automation GmbH | |
4 | * http://www.br-automation.com | |
5 | * | |
6 | */ | |
7 | /dts-v1/; | |
8 | ||
9 | #include "am33xx.dtsi" | |
10 | #include "dt-bindings/thermal/thermal.h" | |
11 | ||
12 | / { | |
13 | model = "BRSMARC1 SoM"; | |
14 | compatible = "ti,am33xx"; | |
15 | ||
16 | fset: factory-settings { | |
17 | bl-version = " "; | |
18 | order-no = " "; | |
19 | cpu-order-no = " "; | |
20 | hw-revision = " "; | |
21 | serial-no = <0>; | |
22 | device-id = <0x0>; | |
23 | parent-id = <0x0>; | |
24 | hw-variant = <0x0>; | |
25 | hw-platform = <0x7>; | |
26 | fram-offset = <0x100>; | |
27 | fram-size = <0x1F00>; | |
28 | cache-disable = <0x0>; | |
29 | cpu-clock = <0x0>; | |
30 | }; | |
31 | ||
32 | chosen { | |
33 | bootargs = "console=ttyO0,115200 earlyprintk"; | |
34 | stdout-path = &uart0; | |
35 | }; | |
36 | ||
37 | aliases { | |
38 | fset = &fset; | |
39 | mmc = &mmc2; | |
40 | spi0 = &spi0; | |
41 | spi1 = &spi1; | |
42 | touch0 = &burtouch0; | |
43 | screen0 = &lcdscreen0; | |
44 | }; | |
45 | ||
46 | memory { | |
47 | device_type = "memory"; | |
48 | reg = <0x80000000 0x10000000>; /* 256 MB */ | |
49 | }; | |
50 | ||
51 | vmmcsd_fixed: fixedregulator@0 { | |
52 | compatible = "regulator-fixed"; | |
53 | regulator-name = "vmmcsd_fixed"; | |
54 | regulator-min-microvolt = <3300000>; | |
55 | regulator-max-microvolt = <3300000>; | |
56 | }; | |
57 | ||
58 | lcdscreen0: lcdscreen@0 { | |
59 | /*backlight = <&tps_bl>; */ | |
60 | compatible = "ti,tilcdc,panel"; | |
61 | status = "okay"; | |
62 | ||
63 | panel-info { | |
64 | ac-bias = <255>; | |
65 | ac-bias-intrpt = <0>; | |
66 | dma-burst-sz = <16>; | |
67 | bpp = <32>; | |
68 | fdd = <0x80>; | |
69 | sync-edge = <0>; | |
70 | sync-ctrl = <1>; | |
71 | raster-order = <0>; | |
72 | fifo-th = <0>; | |
73 | rotation = <0>; | |
74 | pupdelay = <0>; | |
75 | pondelay = <0>; | |
76 | pwrpin = <0x000000B1>; | |
77 | brightdrv = <0>; | |
78 | brightfdim = <100>; | |
79 | brightdef = <50>; | |
80 | }; | |
81 | ||
82 | display-timings { | |
83 | default { | |
84 | clock-frequency = <0>; | |
85 | hactive = <0>; | |
86 | vactive = <0>; | |
87 | hfront-porch = <0>; | |
88 | hback-porch = <0>; | |
89 | hsync-len = <0>; | |
90 | vfront-porch = <0>; | |
91 | vback-porch = <0>; | |
92 | vsync-len = <0>; | |
93 | hsync-active = <0>; | |
94 | vsync-active = <0>; | |
95 | pupdelay = <10>; | |
96 | pondelay = <10>; | |
97 | }; | |
98 | }; | |
99 | }; | |
100 | ||
101 | board_thermal: board-thermal { | |
102 | polling-delay-passive = <1000>; /* milliseconds */ | |
103 | polling-delay = <2500>; /* milliseconds */ | |
104 | ||
105 | thermal-sensors = <&cputemp>; | |
106 | ||
107 | trips { | |
108 | crit_trip: crit-trip { | |
109 | temperature = <95000>; /* millicelsius */ | |
110 | hysteresis = <5000>; /* millicelsius */ | |
111 | type = "critical"; | |
112 | }; | |
113 | }; | |
114 | cooling-maps { | |
115 | map0 { | |
116 | trip = <&crit_trip>; | |
117 | cooling-device = | |
118 | <&resetc THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; | |
119 | }; | |
120 | }; | |
121 | }; | |
122 | }; | |
123 | ||
124 | &uart0 { /* console uart */ | |
8c103c33 | 125 | bootph-pre-ram; |
60df809f HS |
126 | status = "okay"; |
127 | }; | |
128 | ||
129 | &uart2 { /* X2X - P2P */ | |
130 | status = "okay"; | |
131 | }; | |
132 | ||
133 | &uart3 { /* RS485 */ | |
134 | status = "okay"; | |
135 | }; | |
136 | ||
137 | &uart4 { /* RS232 */ | |
138 | status = "okay"; | |
139 | }; | |
140 | ||
141 | &i2c0 { | |
8c103c33 | 142 | bootph-pre-ram; |
60df809f HS |
143 | status = "okay"; |
144 | clock-frequency = <100000>; | |
145 | ||
146 | tps: tps@24 { /* PMIC controller */ | |
8c103c33 | 147 | bootph-pre-ram; |
60df809f HS |
148 | reg = <0x24>; |
149 | compatible = "ti,tps65217"; | |
150 | }; | |
151 | ||
152 | cputemp: temperature-sensor@48 { /* cpu temperature */ | |
153 | #thermal-sensor-cells = <0>; | |
154 | compatible = "nxp,pct2075"; | |
155 | reg = <0x48>; | |
156 | }; | |
157 | ||
158 | basetemp: temperature-sensor@49 { /* baseboard temperature */ | |
159 | #thermal-sensor-cells = <0>; | |
160 | compatible = "nxp,pct2075"; | |
161 | reg = <0x49>; | |
162 | }; | |
163 | extrtc: rtc@51 { /* realtime clock */ | |
164 | compatible = "epson,rx8571"; | |
165 | reg = <0x51>; | |
166 | }; | |
167 | ||
168 | resetc: reset-controller@60 { | |
169 | compatible = "bur,rststm"; | |
170 | reg = <0x60>; | |
171 | ||
172 | cooling-min-state = <0>; | |
173 | cooling-max-state = <1>; /* reset gets fired */ | |
174 | #cooling-cells = <2>; /* min followed by max */ | |
175 | }; | |
176 | }; | |
177 | ||
178 | &i2c1 { | |
8c103c33 | 179 | bootph-pre-ram; |
60df809f HS |
180 | status = "okay"; |
181 | }; | |
182 | ||
183 | &spi0 { | |
8c103c33 | 184 | bootph-pre-ram; |
60df809f HS |
185 | status = "okay"; |
186 | ||
187 | cs-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>, | |
188 | <&gpio0 6 GPIO_ACTIVE_HIGH>, | |
189 | <0>, | |
190 | <0>; | |
191 | ||
192 | spi-max-frequency = <24000000>; | |
193 | ||
194 | spi_flash: spiflash@0 { | |
8c103c33 SG |
195 | bootph-pre-ram; |
196 | bootph-all; | |
60df809f HS |
197 | compatible = "spidev", "spi-flash"; |
198 | spi-max-frequency = <24000000>; | |
199 | reg = <0>; | |
200 | }; | |
201 | }; | |
202 | ||
203 | &spi1 { | |
8c103c33 | 204 | bootph-pre-ram; |
60df809f HS |
205 | status = "okay"; |
206 | cs-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>, | |
207 | <&gpio0 19 GPIO_ACTIVE_HIGH>, | |
208 | <0>, | |
209 | <0>; | |
210 | ||
211 | spi-max-frequency = <24000000>; | |
212 | }; | |
213 | ||
214 | &edma { | |
215 | status = "okay"; | |
216 | }; | |
217 | ||
218 | &cppi41dma { | |
219 | status = "okay"; | |
220 | }; | |
221 | ||
222 | &usb { | |
223 | status = "okay"; | |
224 | }; | |
225 | ||
226 | &usb_ctrl_mod { | |
227 | status = "okay"; | |
228 | }; | |
229 | ||
230 | &usb0_phy { | |
231 | status = "okay"; | |
232 | }; | |
233 | ||
234 | &usb1_phy { | |
235 | status = "okay"; | |
236 | }; | |
237 | ||
238 | &usb0 { | |
239 | status = "okay"; | |
240 | dr_mode = "host"; | |
241 | }; | |
242 | ||
243 | &usb1 { | |
244 | status = "okay"; | |
245 | dr_mode = "host"; | |
246 | }; | |
247 | ||
248 | &davinci_mdio { | |
249 | status = "okay"; | |
3b3e8a37 GS |
250 | |
251 | ethphy0: ethernet-phy@1 { | |
252 | reg = <1>; | |
253 | }; | |
254 | ||
255 | ethphy1: ethernet-phy@3 { | |
256 | reg = <3>; | |
257 | }; | |
60df809f HS |
258 | }; |
259 | ||
260 | &mac { | |
261 | status = "okay"; | |
262 | }; | |
263 | ||
264 | &phy_sel { | |
265 | rmii-clock-ext; | |
266 | }; | |
267 | ||
268 | &cpsw_emac0 { | |
05767707 | 269 | phy_id = <&davinci_mdio>, <1>; |
3b3e8a37 | 270 | phy-handle = <ðphy0>; |
60df809f HS |
271 | phy-mode = "rmii"; |
272 | ti,ledcr = <0x0480>; | |
273 | }; | |
274 | ||
275 | &cpsw_emac1 { | |
05767707 | 276 | phy_id = <&davinci_mdio>, <3>; |
3b3e8a37 | 277 | phy-handle = <ðphy1>; |
60df809f HS |
278 | phy-mode = "rmii"; |
279 | ti,ledcr = <0x0480>; | |
280 | }; | |
281 | ||
282 | &mmc1 { | |
283 | vmmc-supply = <&vmmcsd_fixed>; | |
284 | bus-width = <0x4>; | |
285 | ti,non-removable; | |
286 | ti,needs-special-hs-handling; | |
287 | ti,vcc-aux-disable-is-sleep; | |
288 | status = "okay"; | |
289 | }; | |
290 | ||
291 | &mmc2 { | |
292 | vmmc-supply = <&vmmcsd_fixed>; | |
293 | bus-width = <0x8>; | |
294 | ti,non-removable; | |
295 | ti,needs-special-hs-handling; | |
296 | ti,vcc-aux-disable-is-sleep; | |
297 | status = "okay"; | |
298 | }; | |
299 | ||
ff94c15a DB |
300 | &l4_per { |
301 | ||
302 | segment@300000 { | |
303 | ||
304 | target-module@e000 { | |
8c103c33 | 305 | bootph-all; |
ff94c15a DB |
306 | |
307 | lcdc: lcdc@0 { | |
8c103c33 | 308 | bootph-all; |
ff94c15a DB |
309 | status = "okay"; |
310 | ti,no-reset-on-init; | |
311 | ti,no-idle-on-init; | |
312 | }; | |
313 | }; | |
314 | }; | |
60df809f HS |
315 | }; |
316 | ||
317 | &elm { | |
318 | status = "okay"; | |
319 | }; | |
320 | ||
321 | &sham { | |
322 | status = "okay"; | |
323 | }; | |
324 | ||
325 | &aes { | |
326 | status = "okay"; | |
327 | }; | |
328 | ||
329 | &gpio0 { | |
8c103c33 | 330 | bootph-pre-ram; |
60df809f HS |
331 | ti,no-reset-on-init; |
332 | }; | |
333 | ||
334 | &gpio1 { | |
8c103c33 | 335 | bootph-pre-ram; |
60df809f HS |
336 | ti,no-reset-on-init; |
337 | }; | |
338 | ||
339 | &gpio2 { | |
8c103c33 | 340 | bootph-pre-ram; |
60df809f HS |
341 | ti,no-reset-on-init; |
342 | }; | |
343 | ||
344 | &gpio3 { | |
8c103c33 | 345 | bootph-pre-ram; |
60df809f HS |
346 | ti,no-reset-on-init; |
347 | }; | |
348 | ||
349 | &timer1 { /* today unused */ | |
350 | status = "okay"; | |
351 | ti,no-reset-on-init; | |
352 | ti,no-idle-on-init; | |
353 | }; | |
354 | ||
355 | &timer2 { /* used for vxworks primary timer device */ | |
356 | status = "okay"; | |
357 | ti,no-reset-on-init; | |
358 | ti,no-idle-on-init; | |
359 | }; | |
360 | ||
361 | &timer3 { /* used sysdelay and hal tsc counter*/ | |
362 | status = "okay"; | |
363 | ti,no-reset-on-init; | |
364 | ti,no-idle-on-init; | |
365 | }; | |
366 | ||
367 | &timer4 { /* used for PWM beeper */ | |
368 | status = "okay"; | |
369 | ti,no-reset-on-init; | |
370 | ti,no-idle-on-init; | |
371 | }; | |
372 | ||
373 | &timer5 { /* used for PWM backlight */ | |
374 | status = "okay"; | |
375 | ti,no-reset-on-init; | |
376 | ti,no-idle-on-init; | |
377 | }; | |
378 | ||
379 | &timer6 { /* used for cpsw end device */ | |
380 | status = "okay"; | |
381 | ti,no-reset-on-init; | |
382 | ti,no-idle-on-init; | |
383 | }; | |
384 | ||
385 | &timer7 { /* used for cpsw end device */ | |
386 | status = "okay"; | |
387 | ti,no-reset-on-init; | |
388 | ti,no-idle-on-init; | |
389 | }; | |
390 | ||
391 | &wdt2 { | |
392 | status = "okay"; | |
393 | ti,no-reset-on-init; | |
394 | ti,no-idle-on-init; | |
395 | }; | |
396 | ||
397 | &epwmss0 { | |
398 | status = "okay"; | |
399 | }; | |
400 | ||
401 | &tscadc { | |
402 | status = "okay"; | |
403 | ||
404 | tsc { | |
405 | burtouch0: burtouch@0 { | |
406 | status = "okay"; | |
407 | compatible = "bur,DdVxSfTouchXXX"; | |
408 | bur,hwtree = "IF7"; | |
409 | bur,KX0 = <0x0>; | |
410 | bur,KX1 = <0x0>; | |
411 | bur,KX2 = <0x0>; | |
412 | bur,KY0 = <0x0>; | |
413 | bur,KY1 = <0x0>; | |
414 | bur,KY2 = <0x0>; | |
415 | }; | |
416 | }; | |
417 | }; | |
418 | ||
419 | &dcan0 { | |
420 | status = "okay"; | |
421 | }; | |
422 | ||
423 | &dcan1 { | |
424 | status = "okay"; | |
425 | }; | |
426 | ||
427 | &sham { | |
428 | status = "disabled"; | |
429 | }; | |
430 | ||
431 | &aes { | |
432 | status = "disabled"; | |
433 | }; | |
434 | ||
435 | &rng { | |
436 | status = "disabled"; | |
437 | }; |