[people/ms/u-boot.git] / arch / arm / dts / at91-sama5d4ek.dts

/*
 * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
 *
 *  Copyright (C) 2014 Atmel,
 *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */
/dts-v1/;
#include "sama5d4.dtsi"

/ {
	model = "Atmel SAMA5D4-EK";
	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";

	aliases {
		spi0 = &spi0;
	};

	chosen {
		u-boot,dm-pre-reloc;
		stdout-path = &usart3;
	};


	memory {
		reg = <0x20000000 0x20000000>;
	};

	clocks {
		slow_xtal {
			clock-frequency = <32768>;
		};

		main_xtal {
			clock-frequency = <12000000>;
		};
	};

	ahb {
		apb {
			hlcdc: hlcdc@f0000000 {
				atmel,vl-bpix = <4>;
				atmel,output-mode = <18>;
				atmel,guard-time = <1>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
				status = "okay";
				u-boot,dm-pre-reloc;

				display-timings {
					u-boot,dm-pre-reloc;
					800x480 {
						clock-frequency = <33260000>;
						hactive = <800>;
						vactive = <480>;
						hsync-len = <5>;
						hfront-porch = <128>;
						hback-porch = <0>;
						vfront-porch = <23>;
						vback-porch = <22>;
						vsync-len = <5>;
						u-boot,dm-pre-reloc;
					};
				};
			};

			adc0: adc@fc034000 {
				pinctrl-names = "default";
				pinctrl-0 = <
					/* external trigger conflicts with USBA_VBUS */
					&pinctrl_adc0_ad0
					&pinctrl_adc0_ad1
					&pinctrl_adc0_ad2
					&pinctrl_adc0_ad3
					&pinctrl_adc0_ad4
					>;
				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
				atmel,adc-vref = <3300>;
				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
				status = "okay";		/* Enable ADC IIO support */
			};

			mmc0: mmc@f8000000 {
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioE 5 0>;
				};
			};

			ssc0: ssc@f8008000 {
				status = "okay";
			};

			spi0: spi@f8010000 {
				u-boot,dm-pre-reloc;
				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
				status = "okay";
				spi_flash@0 {
					u-boot,dm-pre-reloc;
					compatible = "spi-flash";
					spi-max-frequency = <50000000>;
					reg = <0>;
				};
			};

			i2c0: i2c@f8014000 {
				status = "okay";

				wm8904: codec@1a {
					compatible = "wlf,wm8904";
					reg = <0x1a>;
					clocks = <&pck2>;
					clock-names = "mclk";
				};

				qt1070:keyboard@1b {
					compatible = "qt1070";
					reg = <0x1b>;
					interrupt-parent = <&pioE>;
					interrupts = <25 0x0>;
					pinctrl-names = "default";
					pinctrl-0 = <&pinctrl_qt1070_irq>;
					wakeup-source;
				};

				atmel_mxt_ts@4c {
					compatible = "atmel,atmel_mxt_ts";
					reg = <0x4c>;
					interrupt-parent = <&pioE>;
					interrupts = <24 0x0>;
					pinctrl-names = "default";
					pinctrl-0 = <&pinctrl_mxt_ts>;
				};
			};

			macb0: ethernet@f8020000 {
				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
				phy-mode = "rmii";
				status = "okay";

				ethernet-phy@1 {
					reg = <0x1>;
					interrupt-parent = <&pioE>;
					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
				};
			};

			mmc1: mmc@fc000000 {
				u-boot,dm-pre-reloc;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
				status = "okay";
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioE 6 0>;
				};
			};

			usart2: serial@fc008000 {
				status = "okay";
			};

			usart3: serial@fc00c000 {
				u-boot,dm-pre-reloc;
				status = "okay";
			};

			usart4: serial@fc010000 {
				status = "okay";
			};

			watchdog@fc068640 {
				status = "okay";
			};

			pinctrl@fc06a000 {
				board {
					u-boot,dm-pre-reloc;
					pinctrl_macb0_phy_irq: macb0_phy_irq {
						atmel,pins =
							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
					};
					pinctrl_mmc0_cd: mmc0_cd {
						atmel,pins =
							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
					};
					pinctrl_mmc1_cd: mmc1_cd {
						u-boot,dm-pre-reloc;
						atmel,pins =
							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
					};
					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
						atmel,pins =
							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
					};
					pinctrl_usba_vbus: usba_vbus {
						atmel,pins =
							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
					};
					pinctrl_key_gpio: key_gpio_0 {
						atmel,pins =
							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
					};
					pinctrl_qt1070_irq: qt1070_irq {
						atmel,pins =
							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
					};
					pinctrl_mxt_ts: mxt_irq {
						atmel,pins =
							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
					};
				};
			};
		};

		usb0: gadget@00400000 {
			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usba_vbus>;
			status = "okay";
		};

		usb1: ohci@00500000 {
			num-ports = <3>;
			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
					   &pioE 11 GPIO_ACTIVE_LOW
					   &pioE 12 GPIO_ACTIVE_LOW
					  >;
			status = "okay";
		};

		usb2: ehci@00600000 {
			status = "okay";
		};

		nand0: nand@80000000 {
			nand-bus-width = <8>;
			nand-ecc-mode = "hw";
			nand-on-flash-bbt;
			atmel,has-pmecc;
			status = "okay";

			at91bootstrap@0 {
				label = "at91bootstrap";
				reg = <0x0 0x40000>;
			};

			bootloader@40000 {
				label = "bootloader";
				reg = <0x40000 0x80000>;
			};

			bootloaderenv@c0000 {
				label = "bootloader env";
				reg = <0xc0000 0xc0000>;
			};

			dtb@180000 {
				label = "device tree";
				reg = <0x180000 0x80000>;
			};

			kernel@200000 {
				label = "kernel";
				reg = <0x200000 0x600000>;
			};

			rootfs@800000 {
				label = "rootfs";
				reg = <0x800000 0x0f800000>;
			};
		};
	};

	gpio_keys {
		compatible = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_key_gpio>;

		pb_user1 {
			label = "pb_user1";
			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
			linux,code = <0x100>;
			wakeup-source;
		};
	};

	leds {
		compatible = "gpio-leds";
		status = "okay";

		d8 {
			label = "d8";
			/* PE28, conflicts with usart4 rts pin */
			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
		};

		d9 {
			label = "d9";
			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
		};

		d10 {
			label = "d10";
			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "heartbeat";
		};
	};

	sound {
		compatible = "atmel,asoc-wm8904";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;

		atmel,model = "wm8904 @ SAMA5D4EK";
		atmel,audio-routing =
			"Headphone Jack", "HPOUTL",
			"Headphone Jack", "HPOUTR",
			"IN1L", "Line In Jack",
			"IN1R", "Line In Jack";

		atmel,ssc-controller = <&ssc0>;
		atmel,audio-codec = <&wm8904>;
	};
};
Commit	Line	Data
40e14221 WY	1	/*
	2	* at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
	3	*
	4	* Copyright (C) 2014 Atmel,
	5	* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
	6	*
	7	* This file is dual-licensed: you can use it either under the terms
	8	* of the GPL or the X11 license, at your option. Note that this dual
	9	* licensing only applies to this file, and not this project as a
	10	* whole.
	11	*
	12	* a) This file is free software; you can redistribute it and/or
	13	* modify it under the terms of the GNU General Public License as
	14	* published by the Free Software Foundation; either version 2 of the
	15	* License, or (at your option) any later version.
	16	*
	17	* This file is distributed in the hope that it will be useful,
	18	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	19	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	20	* GNU General Public License for more details.
	21	*
	22	* Or, alternatively,
	23	*
	24	* b) Permission is hereby granted, free of charge, to any person
	25	* obtaining a copy of this software and associated documentation
	26	* files (the "Software"), to deal in the Software without
	27	* restriction, including without limitation the rights to use,
	28	* copy, modify, merge, publish, distribute, sublicense, and/or
	29	* sell copies of the Software, and to permit persons to whom the
	30	* Software is furnished to do so, subject to the following
	31	* conditions:
	32	*
	33	* The above copyright notice and this permission notice shall be
	34	* included in all copies or substantial portions of the Software.
	35	*
	36	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	37	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	38	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	39	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	40	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	41	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	42	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	43	* OTHER DEALINGS IN THE SOFTWARE.
	44	*/
	45	/dts-v1/;
	46	#include "sama5d4.dtsi"
	47
	48	/ {
	49	model = "Atmel SAMA5D4-EK";
	50	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
	51
	52	aliases {
	53	spi0 = &spi0;
	54	};
	55
	56	chosen {
	57	u-boot,dm-pre-reloc;
	58	stdout-path = &usart3;
	59	};
	60
	61
	62	memory {
	63	reg = <0x20000000 0x20000000>;
	64	};
65
66	clocks {
67	slow_xtal {
68	clock-frequency = <32768>;
69	};
70
71	main_xtal {
72	clock-frequency = <12000000>;
73	};
74	};
75
76	ahb {
77	apb {
4b0467db WY	78	hlcdc: hlcdc@f0000000 {
	79	atmel,vl-bpix = <4>;
	80	atmel,output-mode = <18>;
	81	atmel,guard-time = <1>;
	82	pinctrl-names = "default";
	83	pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
	84	status = "okay";
	85	u-boot,dm-pre-reloc;
	86
	87	display-timings {
	88	u-boot,dm-pre-reloc;
	89	800x480 {
	90	clock-frequency = <33260000>;
	91	hactive = <800>;
	92	vactive = <480>;
	93	hsync-len = <5>;
	94	hfront-porch = <128>;
	95	hback-porch = <0>;
	96	vfront-porch = <23>;
	97	vback-porch = <22>;
	98	vsync-len = <5>;
	99	u-boot,dm-pre-reloc;
	100	};
	101	};
	102	};
	103
40e14221 WY	104	adc0: adc@fc034000 {
	105	pinctrl-names = "default";
	106	pinctrl-0 = <
	107	/* external trigger conflicts with USBA_VBUS */
	108	&pinctrl_adc0_ad0
	109	&pinctrl_adc0_ad1
	110	&pinctrl_adc0_ad2
	111	&pinctrl_adc0_ad3
	112	&pinctrl_adc0_ad4
	113	>;
	114	/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
	115	atmel,adc-vref = <3300>;
	116	/atmel,adc-ts-wires = <4>;/ /* Set up ADC touch screen */
	117	status = "okay"; /* Enable ADC IIO support */
	118	};
	119
	120	mmc0: mmc@f8000000 {
	121	pinctrl-names = "default";
	122	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
	123	slot@0 {
	124	reg = <0>;
	125	bus-width = <4>;
	126	cd-gpios = <&pioE 5 0>;
	127	};
	128	};
	129
	130	ssc0: ssc@f8008000 {
	131	status = "okay";
	132	};
	133
	134	spi0: spi@f8010000 {
	135	u-boot,dm-pre-reloc;
	136	cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
	137	status = "okay";
	138	spi_flash@0 {
	139	u-boot,dm-pre-reloc;
	140	compatible = "spi-flash";
	141	spi-max-frequency = <50000000>;
	142	reg = <0>;
	143	};
	144	};
	145
	146	i2c0: i2c@f8014000 {
	147	status = "okay";
	148
	149	wm8904: codec@1a {
	150	compatible = "wlf,wm8904";
	151	reg = <0x1a>;
	152	clocks = <&pck2>;
	153	clock-names = "mclk";
	154	};
	155
	156	qt1070:keyboard@1b {
	157	compatible = "qt1070";
	158	reg = <0x1b>;
	159	interrupt-parent = <&pioE>;
	160	interrupts = <25 0x0>;
	161	pinctrl-names = "default";
	162	pinctrl-0 = <&pinctrl_qt1070_irq>;
	163	wakeup-source;
	164	};
	165
	166	atmel_mxt_ts@4c {
	167	compatible = "atmel,atmel_mxt_ts";
168	reg = <0x4c>;
169	interrupt-parent = <&pioE>;
170	interrupts = <24 0x0>;
171	pinctrl-names = "default";
172	pinctrl-0 = <&pinctrl_mxt_ts>;
173	};
174	};
175
176	macb0: ethernet@f8020000 {
177	pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
178	phy-mode = "rmii";
179	status = "okay";
180
181	ethernet-phy@1 {
182	reg = <0x1>;
183	interrupt-parent = <&pioE>;
184	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
185	};
186	};
187
188	mmc1: mmc@fc000000 {
189	u-boot,dm-pre-reloc;
190	pinctrl-names = "default";
191	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
192	status = "okay";
193	slot@0 {
194	reg = <0>;
195	bus-width = <4>;
196	cd-gpios = <&pioE 6 0>;
197	};
198	};
199
200	usart2: serial@fc008000 {
201	status = "okay";
202	};
203
204	usart3: serial@fc00c000 {
205	u-boot,dm-pre-reloc;
206	status = "okay";
207	};
208
209	usart4: serial@fc010000 {
210	status = "okay";
211	};
212
213	watchdog@fc068640 {
214	status = "okay";
215	};
216
217	pinctrl@fc06a000 {
218	board {
219	u-boot,dm-pre-reloc;
220	pinctrl_macb0_phy_irq: macb0_phy_irq {
221	atmel,pins =
222	<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
223	};
224	pinctrl_mmc0_cd: mmc0_cd {
225	atmel,pins =
226	<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
227	};
228	pinctrl_mmc1_cd: mmc1_cd {
229	u-boot,dm-pre-reloc;
230	atmel,pins =
231	<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
232	};
233	pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
234	atmel,pins =
235	<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
236	};
237	pinctrl_usba_vbus: usba_vbus {
238	atmel,pins =
239	<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
240	};
241	pinctrl_key_gpio: key_gpio_0 {
242	atmel,pins =
243	<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
244	};
245	pinctrl_qt1070_irq: qt1070_irq {
246	atmel,pins =
247	<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
248	};
249	pinctrl_mxt_ts: mxt_irq {
250	atmel,pins =
251	<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
252	};
253	};
254	};
255	};
256
257	usb0: gadget@00400000 {
258	atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
259	pinctrl-names = "default";
260	pinctrl-0 = <&pinctrl_usba_vbus>;
261	status = "okay";
262	};
263
264	usb1: ohci@00500000 {
265	num-ports = <3>;
266	atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
267	&pioE 11 GPIO_ACTIVE_LOW
268	&pioE 12 GPIO_ACTIVE_LOW
269	>;
270	status = "okay";
271	};
272
273	usb2: ehci@00600000 {
274	status = "okay";
275	};
276
277	nand0: nand@80000000 {
278	nand-bus-width = <8>;
279	nand-ecc-mode = "hw";
280	nand-on-flash-bbt;
281	atmel,has-pmecc;
282	status = "okay";
283
284	at91bootstrap@0 {
285	label = "at91bootstrap";
286	reg = <0x0 0x40000>;
287	};
288
289	bootloader@40000 {
290	label = "bootloader";
291	reg = <0x40000 0x80000>;
292	};
293
294	bootloaderenv@c0000 {
295	label = "bootloader env";
296	reg = <0xc0000 0xc0000>;
297	};
298
299	dtb@180000 {
300	label = "device tree";
301	reg = <0x180000 0x80000>;
302	};
303
304	kernel@200000 {
305	label = "kernel";
306	reg = <0x200000 0x600000>;
307	};
308
309	rootfs@800000 {
310	label = "rootfs";
311	reg = <0x800000 0x0f800000>;
312	};
313	};
314	};
315
316	gpio_keys {
317	compatible = "gpio-keys";
318
319	pinctrl-names = "default";
320	pinctrl-0 = <&pinctrl_key_gpio>;
321
322	pb_user1 {
323	label = "pb_user1";
324	gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
325	linux,code = <0x100>;
326	wakeup-source;
327	};
328	};
329
330	leds {
331	compatible = "gpio-leds";
332	status = "okay";
333
334	d8 {
335	label = "d8";
336	/* PE28, conflicts with usart4 rts pin */
337	gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
338	};
339
340	d9 {
341	label = "d9";
342	gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
343	};
344
345	d10 {
346	label = "d10";
347	gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
348	linux,default-trigger = "heartbeat";
349	};
350	};
351
352	sound {
353	compatible = "atmel,asoc-wm8904";
354	pinctrl-names = "default";
355	pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
356
357	atmel,model = "wm8904 @ SAMA5D4EK";
358	atmel,audio-routing =
359	"Headphone Jack", "HPOUTL",
360	"Headphone Jack", "HPOUTR",
361	"IN1L", "Line In Jack",
362	"IN1R", "Line In Jack";
363
364	atmel,ssc-controller = <&ssc0>;
365	atmel,audio-codec = <&wm8904>;
366	};
367	};