]>
Commit | Line | Data |
---|---|---|
f9e60543 NA |
1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
2 | /* | |
3 | * Copyright (c) 2018 Amlogic, Inc. All rights reserved. | |
4 | */ | |
5 | ||
6 | /dts-v1/; | |
7 | ||
8 | #include "meson-g12a.dtsi" | |
b1e81e67 NA |
9 | #include <dt-bindings/gpio/gpio.h> |
10 | #include <dt-bindings/gpio/meson-g12a-gpio.h> | |
f9e60543 NA |
11 | |
12 | / { | |
13 | compatible = "amlogic,u200", "amlogic,g12a"; | |
14 | model = "Amlogic Meson G12A U200 Development Board"; | |
15 | ||
16 | aliases { | |
17 | serial0 = &uart_AO; | |
d93757f2 | 18 | ethernet0 = ðmac; |
f9e60543 | 19 | }; |
d93757f2 | 20 | |
f9e60543 NA |
21 | chosen { |
22 | stdout-path = "serial0:115200n8"; | |
23 | }; | |
b1e81e67 NA |
24 | |
25 | cvbs-connector { | |
26 | compatible = "composite-video-connector"; | |
27 | ||
28 | port { | |
29 | cvbs_connector_in: endpoint { | |
30 | remote-endpoint = <&cvbs_vdac_out>; | |
31 | }; | |
32 | }; | |
33 | }; | |
34 | ||
d93757f2 NA |
35 | emmc_pwrseq: emmc-pwrseq { |
36 | compatible = "mmc-pwrseq-emmc"; | |
37 | reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; | |
b1e81e67 NA |
38 | }; |
39 | ||
40 | hdmi-connector { | |
41 | compatible = "hdmi-connector"; | |
42 | type = "a"; | |
43 | ||
44 | port { | |
45 | hdmi_connector_in: endpoint { | |
46 | remote-endpoint = <&hdmi_tx_tmds_out>; | |
47 | }; | |
48 | }; | |
49 | }; | |
50 | ||
d93757f2 NA |
51 | memory@0 { |
52 | device_type = "memory"; | |
53 | reg = <0x0 0x0 0x0 0x40000000>; | |
54 | }; | |
55 | ||
56 | flash_1v8: regulator-flash_1v8 { | |
57 | compatible = "regulator-fixed"; | |
58 | regulator-name = "FLASH_1V8"; | |
59 | regulator-min-microvolt = <1800000>; | |
60 | regulator-max-microvolt = <1800000>; | |
61 | vin-supply = <&vcc_3v3>; | |
62 | regulator-always-on; | |
63 | }; | |
64 | ||
b1e81e67 NA |
65 | main_12v: regulator-main_12v { |
66 | compatible = "regulator-fixed"; | |
67 | regulator-name = "12V"; | |
68 | regulator-min-microvolt = <12000000>; | |
69 | regulator-max-microvolt = <12000000>; | |
70 | regulator-always-on; | |
71 | }; | |
72 | ||
d93757f2 NA |
73 | usb_pwr_en: regulator-usb_pwr_en { |
74 | compatible = "regulator-fixed"; | |
75 | regulator-name = "USB_PWR_EN"; | |
76 | regulator-min-microvolt = <5000000>; | |
77 | regulator-max-microvolt = <5000000>; | |
78 | vin-supply = <&vcc_5v>; | |
79 | ||
80 | gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; | |
81 | enable-active-high; | |
82 | }; | |
83 | ||
b1e81e67 NA |
84 | vcc_1v8: regulator-vcc_1v8 { |
85 | compatible = "regulator-fixed"; | |
86 | regulator-name = "VCC_1V8"; | |
87 | regulator-min-microvolt = <1800000>; | |
88 | regulator-max-microvolt = <1800000>; | |
89 | vin-supply = <&vcc_3v3>; | |
90 | regulator-always-on; | |
91 | }; | |
92 | ||
93 | vcc_3v3: regulator-vcc_3v3 { | |
94 | compatible = "regulator-fixed"; | |
95 | regulator-name = "VCC_3V3"; | |
96 | regulator-min-microvolt = <3300000>; | |
97 | regulator-max-microvolt = <3300000>; | |
98 | vin-supply = <&vddao_3v3>; | |
99 | regulator-always-on; | |
100 | /* FIXME: actually controlled by VDDCPU_B_EN */ | |
101 | }; | |
102 | ||
103 | vcc_5v: regulator-vcc_5v { | |
104 | compatible = "regulator-fixed"; | |
105 | regulator-name = "VCC_5V"; | |
106 | regulator-min-microvolt = <5000000>; | |
107 | regulator-max-microvolt = <5000000>; | |
108 | vin-supply = <&main_12v>; | |
109 | ||
110 | gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; | |
111 | enable-active-high; | |
112 | }; | |
113 | ||
b1e81e67 NA |
114 | vddao_1v8: regulator-vddao_1v8 { |
115 | compatible = "regulator-fixed"; | |
116 | regulator-name = "VDDAO_1V8"; | |
117 | regulator-min-microvolt = <1800000>; | |
118 | regulator-max-microvolt = <1800000>; | |
119 | vin-supply = <&vddao_3v3>; | |
120 | regulator-always-on; | |
121 | }; | |
122 | ||
123 | vddao_3v3: regulator-vddao_3v3 { | |
124 | compatible = "regulator-fixed"; | |
125 | regulator-name = "VDDAO_3V3"; | |
126 | regulator-min-microvolt = <3300000>; | |
127 | regulator-max-microvolt = <3300000>; | |
128 | vin-supply = <&main_12v>; | |
129 | regulator-always-on; | |
130 | }; | |
131 | ||
dd5f2351 JB |
132 | vddcpu: regulator-vddcpu { |
133 | /* | |
134 | * MP8756GD Regulator. | |
135 | */ | |
136 | compatible = "pwm-regulator"; | |
137 | ||
138 | regulator-name = "VDDCPU"; | |
139 | regulator-min-microvolt = <721000>; | |
140 | regulator-max-microvolt = <1022000>; | |
141 | ||
142 | vin-supply = <&main_12v>; | |
143 | ||
144 | pwms = <&pwm_AO_cd 1 1250 0>; | |
145 | pwm-dutycycle-range = <100 0>; | |
146 | ||
147 | regulator-boot-on; | |
148 | regulator-always-on; | |
149 | }; | |
b1e81e67 NA |
150 | }; |
151 | ||
152 | &cec_AO { | |
153 | pinctrl-0 = <&cec_ao_a_h_pins>; | |
154 | pinctrl-names = "default"; | |
155 | status = "disabled"; | |
156 | hdmi-phandle = <&hdmi_tx>; | |
157 | }; | |
158 | ||
159 | &cecb_AO { | |
160 | pinctrl-0 = <&cec_ao_b_h_pins>; | |
161 | pinctrl-names = "default"; | |
162 | status = "okay"; | |
163 | hdmi-phandle = <&hdmi_tx>; | |
164 | }; | |
165 | ||
dd5f2351 JB |
166 | &cpu0 { |
167 | cpu-supply = <&vddcpu>; | |
168 | operating-points-v2 = <&cpu_opp_table>; | |
169 | clocks = <&clkc CLKID_CPU_CLK>; | |
170 | clock-latency = <50000>; | |
171 | }; | |
172 | ||
173 | &cpu1 { | |
174 | cpu-supply = <&vddcpu>; | |
175 | operating-points-v2 = <&cpu_opp_table>; | |
176 | clocks = <&clkc CLKID_CPU_CLK>; | |
177 | clock-latency = <50000>; | |
178 | }; | |
179 | ||
180 | &cpu2 { | |
181 | cpu-supply = <&vddcpu>; | |
182 | operating-points-v2 = <&cpu_opp_table>; | |
183 | clocks = <&clkc CLKID_CPU_CLK>; | |
184 | clock-latency = <50000>; | |
185 | }; | |
186 | ||
187 | &cpu3 { | |
188 | cpu-supply = <&vddcpu>; | |
189 | operating-points-v2 = <&cpu_opp_table>; | |
190 | clocks = <&clkc CLKID_CPU_CLK>; | |
191 | clock-latency = <50000>; | |
192 | }; | |
193 | ||
b1e81e67 NA |
194 | &cvbs_vdac_port { |
195 | cvbs_vdac_out: endpoint { | |
196 | remote-endpoint = <&cvbs_connector_in>; | |
197 | }; | |
198 | }; | |
199 | ||
d93757f2 NA |
200 | ðmac { |
201 | status = "okay"; | |
202 | phy-handle = <&internal_ephy>; | |
203 | phy-mode = "rmii"; | |
204 | }; | |
205 | ||
b1e81e67 NA |
206 | &hdmi_tx { |
207 | status = "okay"; | |
208 | pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; | |
209 | pinctrl-names = "default"; | |
210 | hdmi-supply = <&vcc_5v>; | |
211 | }; | |
212 | ||
213 | &hdmi_tx_tmds_port { | |
214 | hdmi_tx_tmds_out: endpoint { | |
215 | remote-endpoint = <&hdmi_connector_in>; | |
216 | }; | |
f9e60543 NA |
217 | }; |
218 | ||
d93757f2 NA |
219 | &ir { |
220 | status = "okay"; | |
221 | pinctrl-0 = <&remote_input_ao_pins>; | |
222 | pinctrl-names = "default"; | |
223 | }; | |
224 | ||
225 | /* i2c Touch */ | |
226 | &i2c0 { | |
227 | status = "okay"; | |
228 | pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>; | |
229 | pinctrl-names = "default"; | |
230 | }; | |
231 | ||
232 | /* i2c CM */ | |
233 | &i2c2 { | |
234 | status = "okay"; | |
235 | pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>; | |
236 | pinctrl-names = "default"; | |
237 | }; | |
238 | ||
239 | /* i2c Audio */ | |
240 | &i2c3 { | |
241 | status = "okay"; | |
242 | pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; | |
243 | pinctrl-names = "default"; | |
244 | }; | |
245 | ||
dd5f2351 JB |
246 | &pwm_AO_cd { |
247 | pinctrl-0 = <&pwm_ao_d_e_pins>; | |
248 | pinctrl-names = "default"; | |
249 | clocks = <&xtal>; | |
250 | clock-names = "clkin1"; | |
251 | status = "okay"; | |
252 | }; | |
253 | ||
d93757f2 NA |
254 | /* SD card */ |
255 | &sd_emmc_b { | |
256 | status = "okay"; | |
257 | pinctrl-0 = <&sdcard_c_pins>; | |
258 | pinctrl-1 = <&sdcard_clk_gate_c_pins>; | |
259 | pinctrl-names = "default", "clk-gate"; | |
260 | ||
261 | bus-width = <4>; | |
262 | cap-sd-highspeed; | |
263 | max-frequency = <50000000>; | |
264 | disable-wp; | |
265 | ||
266 | cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; | |
267 | vmmc-supply = <&vddao_3v3>; | |
268 | vqmmc-supply = <&vddao_3v3>; | |
269 | }; | |
270 | ||
271 | /* eMMC */ | |
272 | &sd_emmc_c { | |
273 | status = "okay"; | |
3a7d6a9c | 274 | pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; |
d93757f2 NA |
275 | pinctrl-1 = <&emmc_clk_gate_pins>; |
276 | pinctrl-names = "default", "clk-gate"; | |
277 | ||
278 | bus-width = <8>; | |
279 | cap-mmc-highspeed; | |
280 | mmc-ddr-1_8v; | |
281 | mmc-hs200-1_8v; | |
282 | max-frequency = <200000000>; | |
283 | non-removable; | |
284 | disable-wp; | |
285 | ||
286 | mmc-pwrseq = <&emmc_pwrseq>; | |
287 | vmmc-supply = <&vcc_3v3>; | |
288 | vqmmc-supply = <&flash_1v8>; | |
289 | }; | |
290 | ||
f9e60543 NA |
291 | &uart_AO { |
292 | status = "okay"; | |
b1e81e67 NA |
293 | pinctrl-0 = <&uart_ao_a_pins>; |
294 | pinctrl-names = "default"; | |
f9e60543 NA |
295 | }; |
296 | ||
b1e81e67 NA |
297 | &usb { |
298 | status = "okay"; | |
299 | vbus-supply = <&usb_pwr_en>; | |
300 | }; | |
301 | ||
302 | &usb2_phy0 { | |
303 | phy-supply = <&vcc_5v>; | |
304 | }; | |
305 | ||
306 | &usb2_phy1 { | |
307 | phy-supply = <&vcc_5v>; | |
308 | }; |