]>
Commit | Line | Data |
---|---|---|
ca62ed2d CH |
1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
2 | /* | |
3 | * Copyright (c) 2019 BayLibre, SAS | |
4 | * Author: Neil Armstrong <narmstrong@baylibre.com> | |
5 | * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> | |
6 | */ | |
7 | ||
8 | /dts-v1/; | |
9 | ||
10 | #include "meson-g12b.dtsi" | |
11 | #include "meson-g12b-s922x.dtsi" | |
12 | #include <dt-bindings/input/input.h> | |
13 | #include <dt-bindings/gpio/meson-g12a-gpio.h> | |
14 | ||
15 | / { | |
16 | aliases { | |
17 | serial0 = &uart_AO; | |
18 | ethernet0 = ðmac; | |
19 | }; | |
20 | ||
21 | chosen { | |
22 | stdout-path = "serial0:115200n8"; | |
23 | }; | |
24 | ||
25 | memory@0 { | |
26 | device_type = "memory"; | |
27 | reg = <0x0 0x0 0x0 0x40000000>; | |
28 | }; | |
29 | ||
30 | emmc_pwrseq: emmc-pwrseq { | |
31 | compatible = "mmc-pwrseq-emmc"; | |
32 | reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; | |
33 | }; | |
34 | ||
35 | sdio_pwrseq: sdio-pwrseq { | |
36 | compatible = "mmc-pwrseq-simple"; | |
37 | reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; | |
38 | clocks = <&wifi32k>; | |
39 | clock-names = "ext_clock"; | |
40 | }; | |
41 | ||
42 | flash_1v8: regulator-flash_1v8 { | |
43 | compatible = "regulator-fixed"; | |
44 | regulator-name = "FLASH_1V8"; | |
45 | regulator-min-microvolt = <1800000>; | |
46 | regulator-max-microvolt = <1800000>; | |
47 | vin-supply = <&vcc_3v3>; | |
48 | regulator-always-on; | |
49 | }; | |
50 | ||
51 | main_12v: regulator-main_12v { | |
52 | compatible = "regulator-fixed"; | |
53 | regulator-name = "12V"; | |
54 | regulator-min-microvolt = <12000000>; | |
55 | regulator-max-microvolt = <12000000>; | |
56 | regulator-always-on; | |
57 | }; | |
58 | ||
59 | vcc_5v: regulator-vcc_5v { | |
60 | compatible = "regulator-fixed"; | |
61 | regulator-name = "VCC_5V"; | |
62 | regulator-min-microvolt = <5000000>; | |
63 | regulator-max-microvolt = <5000000>; | |
64 | vin-supply = <&main_12v>; | |
65 | ||
66 | gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; | |
67 | enable-active-high; | |
68 | }; | |
69 | ||
70 | vcc_1v8: regulator-vcc_1v8 { | |
71 | compatible = "regulator-fixed"; | |
72 | regulator-name = "VCC_1V8"; | |
73 | regulator-min-microvolt = <1800000>; | |
74 | regulator-max-microvolt = <1800000>; | |
75 | vin-supply = <&vcc_3v3>; | |
76 | regulator-always-on; | |
77 | }; | |
78 | ||
79 | vcc_3v3: regulator-vcc_3v3 { | |
80 | compatible = "regulator-fixed"; | |
81 | regulator-name = "VCC_3V3"; | |
82 | regulator-min-microvolt = <3300000>; | |
83 | regulator-max-microvolt = <3300000>; | |
84 | vin-supply = <&vddao_3v3>; | |
85 | regulator-always-on; | |
86 | /* FIXME: actually controlled by VDDCPU_B_EN */ | |
87 | }; | |
88 | ||
89 | vddcpu_a: regulator-vddcpu-a { | |
90 | /* | |
91 | * MP1653 Regulator. | |
92 | */ | |
93 | compatible = "pwm-regulator"; | |
94 | ||
95 | regulator-name = "VDDCPU_A"; | |
96 | regulator-min-microvolt = <721000>; | |
97 | regulator-max-microvolt = <1022000>; | |
98 | ||
99 | vin-supply = <&main_12v>; | |
100 | ||
101 | pwms = <&pwm_ab 0 1250 0>; | |
102 | pwm-dutycycle-range = <100 0>; | |
103 | ||
104 | regulator-boot-on; | |
105 | regulator-always-on; | |
106 | }; | |
107 | ||
108 | vddcpu_b: regulator-vddcpu-b { | |
109 | /* | |
110 | * MP1652 Regulator. | |
111 | */ | |
112 | compatible = "pwm-regulator"; | |
113 | ||
114 | regulator-name = "VDDCPU_B"; | |
115 | regulator-min-microvolt = <721000>; | |
116 | regulator-max-microvolt = <1022000>; | |
117 | ||
118 | vin-supply = <&main_12v>; | |
119 | ||
120 | pwms = <&pwm_AO_cd 1 1250 0>; | |
121 | pwm-dutycycle-range = <100 0>; | |
122 | ||
123 | regulator-boot-on; | |
124 | regulator-always-on; | |
125 | }; | |
126 | ||
127 | usb1_pow: regulator-usb1-pow { | |
128 | compatible = "regulator-fixed"; | |
129 | regulator-name = "USB1_POW"; | |
130 | regulator-min-microvolt = <5000000>; | |
131 | regulator-max-microvolt = <5000000>; | |
132 | vin-supply = <&vcc_5v>; | |
133 | ||
134 | /* connected to SY6280A Power Switch */ | |
135 | gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>; | |
136 | enable-active-high; | |
137 | }; | |
138 | ||
139 | usb_pwr_en: regulator-usb-pwr-en { | |
140 | compatible = "regulator-fixed"; | |
141 | regulator-name = "USB_PWR_EN"; | |
142 | regulator-min-microvolt = <5000000>; | |
143 | regulator-max-microvolt = <5000000>; | |
144 | vin-supply = <&vcc_5v>; | |
145 | ||
146 | /* Connected to USB3 Type-A Port power enable */ | |
147 | gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>; | |
148 | enable-active-high; | |
149 | }; | |
150 | ||
151 | vddao_1v8: regulator-vddao-1v8 { | |
152 | compatible = "regulator-fixed"; | |
153 | regulator-name = "VDDAO_1V8"; | |
154 | regulator-min-microvolt = <1800000>; | |
155 | regulator-max-microvolt = <1800000>; | |
156 | vin-supply = <&vddao_3v3>; | |
157 | regulator-always-on; | |
158 | }; | |
159 | ||
160 | vddao_3v3: regulator-vddao-3v3 { | |
161 | compatible = "regulator-fixed"; | |
162 | regulator-name = "VDDAO_3V3"; | |
163 | regulator-min-microvolt = <3300000>; | |
164 | regulator-max-microvolt = <3300000>; | |
165 | vin-supply = <&main_12v>; | |
166 | regulator-always-on; | |
167 | }; | |
168 | ||
169 | cvbs-connector { | |
170 | compatible = "composite-video-connector"; | |
171 | ||
172 | port { | |
173 | cvbs_connector_in: endpoint { | |
174 | remote-endpoint = <&cvbs_vdac_out>; | |
175 | }; | |
176 | }; | |
177 | }; | |
178 | ||
179 | hdmi-connector { | |
180 | compatible = "hdmi-connector"; | |
181 | type = "a"; | |
182 | ||
183 | port { | |
184 | hdmi_connector_in: endpoint { | |
185 | remote-endpoint = <&hdmi_tx_tmds_out>; | |
186 | }; | |
187 | }; | |
188 | }; | |
189 | ||
190 | wifi32k: wifi32k { | |
191 | compatible = "pwm-clock"; | |
192 | #clock-cells = <0>; | |
193 | clock-frequency = <32768>; | |
194 | pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ | |
195 | }; | |
196 | }; | |
197 | ||
198 | &cec_AO { | |
199 | pinctrl-0 = <&cec_ao_a_h_pins>; | |
200 | pinctrl-names = "default"; | |
201 | status = "disabled"; | |
202 | hdmi-phandle = <&hdmi_tx>; | |
203 | }; | |
204 | ||
205 | &cecb_AO { | |
206 | pinctrl-0 = <&cec_ao_b_h_pins>; | |
207 | pinctrl-names = "default"; | |
208 | status = "okay"; | |
209 | hdmi-phandle = <&hdmi_tx>; | |
210 | }; | |
211 | ||
212 | &cpu0 { | |
213 | cpu-supply = <&vddcpu_b>; | |
214 | operating-points-v2 = <&cpu_opp_table_0>; | |
215 | clocks = <&clkc CLKID_CPU_CLK>; | |
216 | clock-latency = <50000>; | |
217 | }; | |
218 | ||
219 | &cpu1 { | |
220 | cpu-supply = <&vddcpu_b>; | |
221 | operating-points-v2 = <&cpu_opp_table_0>; | |
222 | clocks = <&clkc CLKID_CPU_CLK>; | |
223 | clock-latency = <50000>; | |
224 | }; | |
225 | ||
226 | &cpu100 { | |
227 | cpu-supply = <&vddcpu_a>; | |
228 | operating-points-v2 = <&cpub_opp_table_1>; | |
229 | clocks = <&clkc CLKID_CPUB_CLK>; | |
230 | clock-latency = <50000>; | |
231 | }; | |
232 | ||
233 | &cpu101 { | |
234 | cpu-supply = <&vddcpu_a>; | |
235 | operating-points-v2 = <&cpub_opp_table_1>; | |
236 | clocks = <&clkc CLKID_CPUB_CLK>; | |
237 | clock-latency = <50000>; | |
238 | }; | |
239 | ||
240 | &cpu102 { | |
241 | cpu-supply = <&vddcpu_a>; | |
242 | operating-points-v2 = <&cpub_opp_table_1>; | |
243 | clocks = <&clkc CLKID_CPUB_CLK>; | |
244 | clock-latency = <50000>; | |
245 | }; | |
246 | ||
247 | &cpu103 { | |
248 | cpu-supply = <&vddcpu_a>; | |
249 | operating-points-v2 = <&cpub_opp_table_1>; | |
250 | clocks = <&clkc CLKID_CPUB_CLK>; | |
251 | clock-latency = <50000>; | |
252 | }; | |
253 | ||
254 | &cvbs_vdac_port { | |
255 | cvbs_vdac_out: endpoint { | |
256 | remote-endpoint = <&cvbs_connector_in>; | |
257 | }; | |
258 | }; | |
259 | ||
260 | &ext_mdio { | |
261 | external_phy: ethernet-phy@0 { | |
262 | /* Realtek RTL8211F (0x001cc916) */ | |
263 | reg = <0>; | |
264 | max-speed = <1000>; | |
265 | ||
266 | reset-assert-us = <10000>; | |
2e8d47c6 | 267 | reset-deassert-us = <80000>; |
ca62ed2d CH |
268 | reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; |
269 | ||
270 | interrupt-parent = <&gpio_intc>; | |
271 | /* MAC_INTR on GPIOZ_14 */ | |
272 | interrupts = <26 IRQ_TYPE_LEVEL_LOW>; | |
273 | }; | |
274 | }; | |
275 | ||
276 | ðmac { | |
277 | pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; | |
278 | pinctrl-names = "default"; | |
279 | status = "okay"; | |
280 | phy-mode = "rgmii"; | |
281 | phy-handle = <&external_phy>; | |
282 | amlogic,tx-delay-ns = <2>; | |
283 | }; | |
284 | ||
285 | &hdmi_tx { | |
286 | status = "okay"; | |
287 | pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; | |
288 | pinctrl-names = "default"; | |
289 | hdmi-supply = <&vcc_5v>; | |
290 | }; | |
291 | ||
292 | &hdmi_tx_tmds_port { | |
293 | hdmi_tx_tmds_out: endpoint { | |
294 | remote-endpoint = <&hdmi_connector_in>; | |
295 | }; | |
296 | }; | |
297 | ||
298 | &ir { | |
299 | status = "okay"; | |
300 | pinctrl-0 = <&remote_input_ao_pins>; | |
301 | pinctrl-names = "default"; | |
302 | }; | |
303 | ||
304 | &pwm_ab { | |
305 | pinctrl-0 = <&pwm_a_e_pins>; | |
306 | pinctrl-names = "default"; | |
307 | clocks = <&xtal>; | |
308 | clock-names = "clkin0"; | |
309 | status = "okay"; | |
310 | }; | |
311 | ||
312 | &pwm_AO_cd { | |
313 | pinctrl-0 = <&pwm_ao_d_e_pins>; | |
314 | pinctrl-names = "default"; | |
315 | clocks = <&xtal>; | |
316 | clock-names = "clkin1"; | |
317 | status = "okay"; | |
318 | }; | |
319 | ||
320 | &pwm_ef { | |
321 | pinctrl-0 = <&pwm_e_pins>; | |
322 | pinctrl-names = "default"; | |
323 | clocks = <&xtal>; | |
324 | clock-names = "clkin0"; | |
325 | status = "okay"; | |
326 | }; | |
327 | ||
328 | /* SDIO */ | |
329 | &sd_emmc_a { | |
330 | status = "okay"; | |
331 | pinctrl-0 = <&sdio_pins>; | |
332 | pinctrl-1 = <&sdio_clk_gate_pins>; | |
333 | pinctrl-names = "default", "clk-gate"; | |
334 | #address-cells = <1>; | |
335 | #size-cells = <0>; | |
336 | ||
337 | bus-width = <4>; | |
338 | cap-sd-highspeed; | |
339 | max-frequency = <100000000>; | |
340 | ||
341 | /* WiFi firmware requires power to be kept while in suspend */ | |
342 | keep-power-in-suspend; | |
343 | ||
344 | non-removable; | |
345 | disable-wp; | |
346 | ||
347 | mmc-pwrseq = <&sdio_pwrseq>; | |
348 | ||
349 | vmmc-supply = <&vddao_3v3>; | |
350 | vqmmc-supply = <&vddao_1v8>; | |
351 | ||
352 | brcmf: wifi@1 { | |
353 | reg = <1>; | |
354 | compatible = "brcm,bcm4329-fmac"; | |
355 | }; | |
356 | }; | |
357 | ||
358 | /* SD card */ | |
359 | &sd_emmc_b { | |
360 | status = "okay"; | |
361 | pinctrl-0 = <&sdcard_c_pins>; | |
362 | pinctrl-1 = <&sdcard_clk_gate_c_pins>; | |
363 | pinctrl-names = "default", "clk-gate"; | |
364 | ||
365 | bus-width = <4>; | |
366 | cap-sd-highspeed; | |
367 | max-frequency = <50000000>; | |
368 | disable-wp; | |
369 | ||
370 | cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; | |
371 | vmmc-supply = <&vddao_3v3>; | |
372 | vqmmc-supply = <&vddao_3v3>; | |
373 | }; | |
374 | ||
375 | /* eMMC */ | |
376 | &sd_emmc_c { | |
377 | status = "okay"; | |
378 | pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; | |
379 | pinctrl-1 = <&emmc_clk_gate_pins>; | |
380 | pinctrl-names = "default", "clk-gate"; | |
381 | ||
382 | bus-width = <8>; | |
383 | cap-mmc-highspeed; | |
384 | max-frequency = <100000000>; | |
385 | disable-wp; | |
386 | ||
387 | mmc-pwrseq = <&emmc_pwrseq>; | |
388 | vmmc-supply = <&vcc_3v3>; | |
389 | vqmmc-supply = <&flash_1v8>; | |
390 | }; | |
391 | ||
392 | &uart_A { | |
393 | status = "okay"; | |
394 | pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; | |
395 | pinctrl-names = "default"; | |
396 | uart-has-rtscts; | |
397 | ||
398 | bluetooth { | |
399 | compatible = "brcm,bcm43438-bt"; | |
400 | shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; | |
401 | max-speed = <2000000>; | |
402 | clocks = <&wifi32k>; | |
403 | clock-names = "lpo"; | |
404 | }; | |
405 | }; | |
406 | ||
407 | &uart_AO { | |
408 | status = "okay"; | |
409 | pinctrl-0 = <&uart_ao_a_pins>; | |
410 | pinctrl-names = "default"; | |
411 | }; | |
412 | ||
413 | &usb { | |
414 | status = "okay"; | |
415 | dr_mode = "host"; | |
416 | vbus-supply = <&usb_pwr_en>; | |
417 | }; | |
418 | ||
419 | &usb2_phy0 { | |
420 | phy-supply = <&usb1_pow>; | |
421 | }; | |
422 | ||
423 | &usb2_phy1 { | |
424 | phy-supply = <&usb1_pow>; | |
425 | }; |